Embed Size (px)
Citation preview
CREATINGWITH
May 2012 - Exterior Edition
Page 1 of 2
Copyright 2012 PT. Asahimas Flat Glass, TbkAll Right Reserved
If you have any enquires, please email [email protected] but If you would prefer not to receive future updates,
please <unsubscribe> in reply to this email
TrendGlass
Sunergy is a low reflecting glass, prized for i ts superb
appearance and visual comfort . The range excels in thermal-
insulat ion and solar control propert ies
Sunergy offers visual & thermal comfort. The excellent combination of
light transmission, solar control & thermal insulation makes Sunergy the
ideal glass of all seasons.
Sunergy offers flexibility in processing. It can be processed to safety glass
(heat strengthened, tempered, or laminated) and Insulated Glass Unit
Neutrality and Selectivity
Solar Control Low E Glass
SUNERGY
Interior Glass Forum
@I_GlassForum
Iinteriorglassforum
Hwww.amfg.co.id
Page 2 of 2
Copyright 2012 PT. Asahimas Flat Glass,TbkAll Right Reserved
If you have any enquires, please email [email protected] but If you would prefer not to receive future updates,
please <unsubscribe> in reply to this email
CREATINGWITH
May 2012 - Exterior Edition
Hwww.amfg.co.id
TrendGlass
Interior Glass Forum
@I_GlassForum
Iinteriorglassforum
Sunergy is already has two range of colour which are Sunergy
Clear and Sunergy Green. Now, there is two new colour that has
been added to Sunergy colour range, Asahimas introduces you
Sunergy Blue Green and Sunergy Euro Grey.
Since Last year, Sunergy Blue Green is the current favourite
colour, this colour has been used for many prestigious project in
Jakarta. Sunergy Blue Green is the glass that makes your
building look calm and natural.
Euro Grey is already been used as a solar control glass, which
has an ability to absorb solar heat. Now, Asahimas has
enhanced the performance by adding Low-E coating on one of
it’s surface. This combination makes this glass has a perfect
performance for both Solar Control and Thermal Insulation.
Sunergy Euro Grey is the glass that makes your building more
elegant and relaxing.
Exellence in Aesthetics
Remarks :
· Coating position #2 : inside coating position
· The data are calculated using spectral measurements that are conform to standards EN 410 ,
ISO 9050 (1990) and WIS / WINDAT
· The Ug-value (formerly k-value) is calculated according to standard EN 673. The emissivity
measurement complies with standards EN 673 (Annex A) and EN 12898
· Specifications, technical and other data are based on information available at the time of
preparation of this document and are subject to change without notice. Asahimas can not
be held responsible for any deviation between the data introduced and the conditions on site.
This document is only informative, in no way it implies an acceptance of the order by Asahimas .
For performance of other glazing composition
(Laminated Glass and Insulated Glazing Unit)
and samples inquiry, please contact us by email.
