...a passion for perfection

DRILLING & TAPPING SOLUTIONS

www.amtplindia.com

2019-2020

BT 15 GLBT 18 GL (3) UNIMAX 2S TAP SPEEDMAXPrecision drilling machine for drillings starting from0.2 mm. Variable frequency drive with digital RPMindicator. Very high spindle concentricity <0.005 mm.Optional visualization by camera and collet setare available at extra cost.

Standard capacity in E 335

Spindle / Collet

Spindle to column

Spindle to baseplate

Table surface

Total Height

Weight

Motor

Stepless spindle rpm

Mains connection

Spindle travel

ER 11

0.2 - 4 mm

55 mm

215 mm

60 to 345 mm

280 x 475 mm

780 mm

51 kg

0.75 kW

700-24,000 rpm

230 V / 50-60 Hz

Manufacturing Marketing Sourcing

Marketed by

ahire machine tools pvt ltd Web Email

: www.amtplindia.com: sales@amtplindia.com

High performance tapping machine with lead screw.Safety arrangement for prevention of tool breakage.Programme for tapping single and continous cycles,programmable tapping depth, piece counter, LEDmachine light and electronically controlled motorbraking for single cycle operation. Simple replacementof lead screw by means of quick coupling.

Technical data BT 18 GL

Tapping capacity

Threads per hour

Standard capacity

Spindle

Depth of thread

Spindle travel

Spindle to column

Spindle / Table

Table surface

T-slot width

Column diameter

Total height

Weight

Special motor

Mains connection

4 xed spindle rpm steps

M3- M10

1,000

15 mm

MT 2

60 mm

100 mm

250 mm

185-541 mm

340 x 445 mm

12 mm

90 mm

1,050 mm

120 kg

0.55 kW

400 V / 50 Hz

320 rpm

560 rpm

1,000 rpm

1,600 rpm

Optional / Accessories

• Lead screw

• Tap holder

• Bottoming release switch

• Force ventilated motor

• Column longer by 200 mm for BT 18 GL

• Foot impulse switch

• Minimum quantity lubrication system

• Floor units

Very powerful, all-purpose drilling machine withwide range of application. Three-phase motor,integrated tapping unit as standard. LED machinelight and programmable tapping depth.Rpm and drilling depth are shown in the display.

Technical data UNIMAX2 TAP

Constant capacity in E 335

Standard capacity

Tapping capacity

Spindle

Spindle travel

Spindle to column

Spindle / Table

Table surface

T-slot width

Column diameter

Total height

Weight

Frequency-controlled motor

Mains connection

LED machine light

Stepless Spindle rpm

Drilling Range A

Drilling Range B

Tapping Range A

Tapping Range B

18 mm

20 mm

M 16 in S235

MT 2

100 mm

225 mm

55 to 880 mm

450 x 315 mm

14 mm

90 mm

max 1,745 mm

170 kg

1.5 kW

230 V / 50 Hz

included

100-2,000 rpm

200-4,000 rpm

100-500 rpm

200-1,000 rpm

Optional / Accessories

• Tap holder

• Minimum quantity lubrication system

Technical data SPEEDMAX

Optional / Accessories

• Visual display camera

• Collet set

Manufactured by

MAXION Jänsch & Ortlepp GmbHWeb : www.maxion.de

89x52x127 cmStandard packaging

Standard packaging 220x74x125 cm

Reliable tapping machine for quality-orientated tapping respectively Reliable tapping machine for quality-orientated tapping respectively thread moulding M1 to M 18, screw in of thread inserts, rethreadingthread moulding M1 to M 18, screw in of thread inserts, rethreadingand postforming as well as checking already manufactured threads.and postforming as well as checking already manufactured threads.Thanks to the menu guided operation machine parameters can beThanks to the menu guided operation machine parameters can beentered fast and uncomplicated. For each particular machiningentered fast and uncomplicated. For each particular machiningprocess the ideal rotation speeds, drilling depth as well as theprocess the ideal rotation speeds, drilling depth as well as theminimum and maximum tapping torque can be entered. If theminimum and maximum tapping torque can be entered. If themachine leaves these parameters, the thread will be identied asmachine leaves these parameters, the thread will be identied asdefective. By means of an integrated piece counter an overviewdefective. By means of an integrated piece counter an overviewof already processed workpieces is provided everytime. For analysisof already processed workpieces is provided everytime. For analysisand control of tapping processes the machine can be connectedand control of tapping processes the machine can be connectedto a PC.to a PC.

Reliable tapping machine for quality-orientated tapping respectively thread moulding M1 to M 18, screw in of thread inserts, rethreadingand postforming as well as checking already manufactured threads.Thanks to the menu guided operation machine parameters can beentered fast and uncomplicated. For each particular machiningprocess the ideal rotation speeds, drilling depth as well as theminimum and maximum tapping torque can be entered. If themachine leaves these parameters, the thread will be identied asdefective. By means of an integrated piece counter an overviewof already processed workpieces is provided everytime. For analysisand control of tapping processes the machine can be connectedto a PC.

MAXTAP / JOBTAP

This model is now also manufactured in India by under Licence fromamt MAXION Jänsch & Ortlepp GmbH

BS 25 AVSTPowerful and precise universal column drilling machine with stepless drive mechanism. Electro-magnetic clutch for feed. Table adjustable via rack and pinion, rotatable around column. Motor protection, Depth and RPM indicator. Machine base with T-slots.

Constant Capacity in St 60 25 mm

Extra Attachment

Numerical Control (NC) XY Table

Work Table

X-Y Stroke

600x240mm

350/150mm

Available with XY Table

GANG DRILLINGMACHINES

Maxtap / Jobtap G5 G8

Tapping performance

X5CrNi189/1.4435

9SMn28/1.0415

AlCuMgPb/3.1645

Max.tapping depth / stroke

Insert holder

quick change system

Insert holder / spindle

Distance tool holder/work table

Torque range Mz (stepless)

Spindle sped range (stepless)

With

depth

Height

Weight net

Column (adjustable with hand wheel)

base plate in mm

2 x T-slot

Mains voltage

Power consumption

M1-M5

M1-M6

M1-M6

45/65 mm

SWS 0

incl.5 inserts

B 10

0-280 mm

5-220 Ncm

250-2,200 rpm

323 mm

510 mm

780 mm

51.4 kg

600 mm

280x475x50

M 12x14

230 V/50-60 Hz

300 W

M2.5-M8

M2.5-M10

M2.5-M12

75/85mm

SWS 1

incl.6 inserts

B 12

0-400 mm

50-700 Ncm

300-3,000 rpm

312 mm

530 mm

930 mm

61.7 kg

750 mm

280x475x50

M 12x14

230 V/50-60 Hz

2,900 W

Column Diameter

Weight

Pole Changing Motor

Stepless Rotation Speeds

Mode of spindle travel

T-slot on work table (Size & Qty.)

T-slot on Base (Size & Qty.)

110 mm

285 kg

0.8/1.5 KW

Manual & Auto

(14 mm x 2Nos.)

(14 mm x 2Nos.)

900x600x1850mm

120-2200rpm (approx.)

Standard capacity 32 mm

Spindle

Automatic Feed

Spindle Travel

Spindle to Column

Spindle to Table

Spindle to base

Table Surface

MT 3

120 mm

260 mm

90 to 760 mm

1320 mm

500 x 365 mm

0.1-0.16-0.25mm/turn

Dimension (LxWxH)

•The AMT multi-head units are mounted on box -The AMT multi-head units are mounted on box -

type stands and can be supplied with 2, 3, 4, 5 type stands and can be supplied with 2, 3, 4, 5

or 6 units. or 6 units.

The heavy torsion resistant fabricated table has The heavy torsion resistant fabricated table has•

2 T- slots. 2 T- slots.

It also has a storage shelf. It also has a storage shelf.•

The electrical equipment is clearly laid out in a The electrical equipment is clearly laid out in a•

terminal switch box terminal switch box

Alternative heads : Alternative heads : •

BT6, DB 23/28, TDB 23/28, BT6, DB 23/28, TDB 23/28,

BS 25 AVST, TDB 23/28 VFD BS 25 AVST, TDB 23/28 VFD

Electrical coolant unit at extra cost. Electrical coolant unit at extra cost.•

Other accessories see back page. Other accessories see back page.•

•The AMT multi-head units are mounted on box -

type stands and can be supplied with 2, 3, 4, 5

or 6 units.

The heavy torsion resistant fabricated table has•

2 T- slots.

It also has a storage shelf.•

The electrical equipment is clearly laid out in a•

terminal switch box

Alternative heads : •

BT6, DB 23/28, TDB 23/28,

BS 25 AVST, TDB 23/28 VFD

Electrical coolant unit at extra cost.•

Other accessories see back page.•

Technical data BS 25 AVST

Drilling Machinewith Auto Feed

Description Units DB 23A

Drilling capacity in steel mm Ø 20

Spindle Nose Taper MT MT2

Spindle stroke max.

for Drillingmm 125

No. of spindle speed Nos 8

Mode of spindle feedfor Drilling Mode Automatic

Column Diameter

Spindle to column face

Clamping area on

work table

Net weight (Approx.)

mm 80

240mm

mmx

mm240 x 240

kg 165

Drilling & Tapping Machinewith Variable Frequency

Drive (VFD)

High Speed Micro DrillingMachine

Description Units TDB-23V Description Units

Drilling capacity in steel

Tapping capacity in steel

Step less Rotation speeds

Range A

Range B

Spindle

Spindle Travel

Spindle to column

Column Diameter

Table surface

Make

Model

Frequency control 3- Phase motor

mm

rpm

rpm

mm

mm

mm

mm

mm

4-20

M4-M12

230 - 770

845-2800

MT 2

125

240

80

240x240

ABB

ACS 150

2HP, 50Hz,415 V

Digital Display for RPM

Reverse forward switch for tapping

Adjustment of speed via. potentiometer

Machine is suitable for Thermal drilling

operations.

ŸŸŸŸ

Drilling capacity in steel

Spindle

Spindle Travel

Spindle to column

Spindle to table

Table surface

T-slot width

Columm diameter

Total height

Weight

Pole changing motor

Mains connection 3 phase

8 xed spinsle rpm steps

Standard packaging

with cabinet

mm

mm

mm

mm

mm

mm

mm

mm

kg

kw

rpm

mm

BT 6

0.7-6

B12

55

180

135 to 380

220 to 285

12

75

800

73

0.37/0.6

400 v / 50 Hz

900-10,000

890x520x1270

Spindle face to Work Table

T Slot on Work Table

(Size x Qty)

Spindle face to Base Plate

Base Plate Working

Area (Std)

Base Plate Working

Area (Coolant)

T Slot on Base

(Size x Qty)

Main Motor Power**

mm

x mm

mm

x mm

mm

x Nos

HP

mm

mm

x Nos

mm

308/600

12 x 2

600/660-1150

250 x 250

250 x 280

14 x 2

1/1

Spindle to column face

Clamping area on

work table

Net weight (Approx.)

Dimensions

240mm

mmx

mm240 x 240

kgs 165

380x700x1130

mm

Spindle face to Work Table

T Slot on Work Table

(Size x Qty)

Spindle face to Base Plate

Base Plate Working

Area (Std)

Base Plate Working

Area (Coolant)

T Slot on Base

(Size x Qty)

Main Motor Power**

mm

x mm

mm

x mm

mm

x Nos

HP

mm

mm

x Nos

mm

308/600

12 x 2

600/660-1150

250 x 250

250 x 280

14 x 2

1/1Delta make PLC with HMI

Program for drilling single & continuous cycle

Stepper motor - 870 kg-cm

Helical gear box

Ÿ

Ÿ

Ÿ

Ÿ

Sensitive precision drilling machine with veryhigh concentricity, especially for electronic &precision engineering

Spindle run out accuracy maintained within 10microns at spindle nose.

Column adjustable via rack & pinionarrangement.

Dual speed motor

Mode of spindle feed for drilling - Manual

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Note : These models are available in column type conguration

AMT PRECISION DRILLING & TAPPING MACHINES

Range of spindle speed rpm 112 -2800

Dimensions 380x700x1130

mm

Machine Features :

TDB/TDC-23TDB/TDC-23 EQ-16TDDB/DC-28

High precision spindle made from alloy steel, hardened & precision ground.

Graded casting (Stress relieved).

Alloy steel gears.

Spindle auto reversal for tapping cycle.

Robust construction.

Motor with electrical fitments is a standard feature.

Machine lamp - a standard feature.

Stringent quality checks at every level.

Test chart is provided with every machine.

Spindle run-out accuracy is within 10 microns.

Easy belt changing through rack and pinion mechanism.

Dynamically balanced v-belt pulleys guarantee of secure power

transmission even in the lower rotation speeds.

Machine is recommended for Thermal Drilling Operation.

AMT PRECISION DRILLING &TAPPING MACHINES

Unit

mm

mm

MT

Metric

mm

mm

Nos

rpm

Mode

Mode

mm

mm

mm

mm x mm

mm x Nos

mm

mm x mm

mm x mm

mm x Nos

HP

Kg

mm

DB/DC-23

Ø 23

- -

MT2

M32 x 1.5P

125

- -

8

112-2800

Manual

- -

80

240

308/600

240 x 240

12 x 2

600/660-1150

250 x 250

250 x 280

14 x 2

165/180

380x700x1130/

480x740x1700

TDB/TDC-23

Ø 23

M14

MT2

M32 x 1.5P

125

100

8

56-1400

Manual

Manual

80

240

308/600

240 x 240

12 x 2

600/660-1150

250 x 250

250 x 280

14 x 2

1

167/182

380x700x1130/

480x740x1700

DB/DC-28

Ø 28

- -

MT3

M35 x 1.5P

125

- -

8

112-2800

Manual

- -

80

240

308/600

240 x 240

12 x 2

600/660-1150

250 x 250

250 x 280

14 x 2

2

165/180

380x700x1130/

480x740x1700

Description

Drilling Capacity in Steel (MS)

Tapping Capacity in Steel (MS)

Spindle Nose Taper

Threading on Spindle OD

Spindle Stroke Max. for Drilling

Spindle Stroke Max. for Tapping

No. of Spindle Speed

Range of Spindle Speed

Mode of Spindle feed for Drilling

Mode of Spindle feed for Tapping

Column Diameter

Spindle to Column Face

Spindle face to Work Table

Clamping area on Work Table

T Slot on Work Table (Size x Qty)

Spindle face to Base Plate

Base Plate Working Area (Std)

Base Plate Working Area (Coolant)

T Slot on Base (Size x Qty)

Main Motor Power

Net Weight (Approx)

Dimensions (WxDxH)

TDB/TDC-28

Ø 28

M16

MT3

M35 x 1.5P

125

8

56-1400

Manual

Manual

80

240

308/600

240 x 240

600/660-1150

250 x 280

14 x 2

2

167/182

380x700x1130/

480x740x1700

Spindle auto-reversal facility to enable tapping operation.

Motor power can be increased upto 3 HP to enable Thermal Drilling Operations.

Available Accessories : Anti-vibration mounts, External coolant attachment, Albrecht key-less drill chuck, Clamping vice,

Reducer sleeve, Cabinet are available at extra cost.

EQ-16TD

M8 / 10

MT-2

M32 x 1.5P

125

4

355-2000

Manual

Manual

80

240

308/600

12 x 2

600

250 x 250 250 x 280

--

--

0.51

150

308x700x1130

100 100

Ø 16 / 18

Ø 300

--

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

Ÿ

ACCESSORIES

Add : D1/18, MIDC, Ambad,Nashik, Maharashtra, India. 422010Contact No. : +91 9922448079, +91 9922413270 , +91 9130099422

Email : sales@amtplindia.com Web : www.amtplindia.com

Manufacturing Marketing Sourcing

ahire machine tools pvt. ltd.

Manufactured by

Keyless Drill Chuck

Reducer Sleeve MT3 to MT2Clamping Vice

External Coolant System

Cabinet Box

Anti vibration Mounts