Upload
vocong
View
220
Download
0
Embed Size (px)
Citation preview
Air Permeability as per EN 1026
PRESSUREin Pascals
FLOW TIME100 lt. of air in sec.
Hermetic sliding door for clean rooms
50
100
150
200
250
300
1,2
3,0
4,2
4,8
6,0
6,6
0,44
1,09
1,53
1,75
2,19
2,40
300,00
120,00
85,71
75,00
60,00
54,55
0,17
0,44
0,61
0,70
0,87
0,96
Classification as per EN12207is: CLASS 4
Air Permeability
Pressure in Pascals
No classification
Class 1
Class 2
Class 4
m3 / h x m2 of surface m3 / (h x m) of joint
1
2
4
6
8
10
20
40
60
80
100
0,5
1
2
5
10
15
10 50 100 150 300
surface unitjoint length
Class 3
Hermetic sliding door for clean rooms
Dimensions Technical specifications
AIR FLOW LOST Total m3/h Surface unit m3/h x m2 Joint length m3/h x linear mt. MECHANICAL FEATURES BRAVO OPERATOR
Bi-partBRAVO OPERATORSingle slide
PERFORMANCE
SAFETY
ELECTRICAL FEATURES
Opening speed per leaf. Adjustable
Relative opening speed (bi-part). Adjustable
Closing speed per leaf. Adjustable
Closing force. Adjustable
Acceleration
Independent adjustment of speed and force
Low voltage 73/23/CEE
Electromagnetic Compatibility (EMC) 89/336/CEE (AS 4251.1)
Construction products 89/106/CEE
Safety of machinery 89/392/CEE - 91/368/CEE - 93/44/CEE
Air Permeability Class 4 (EN12207)
Operator standard dimensions
Maximum operator length
Maximum clear width
Minimum clear width
Maximum recommended clear height
Maximum leaf weight
Standard power supply
Optional power supply
No. and type of motors
Inverter technology (exclusive of manusa)
Direct drive transmission
Power consumption during operation
Fuse protection
Environment temperature during operation
Rechargeable fail-safe batteries
Safety stop/reverse
Infrared barriers
YES – Adjustable
1 or 2
YES – Adjustable
1 or 2
224x180 mm
6000 mm
2950 mm
1300 mm
2300 mm
2x85 Kg
224x180 mm
4100 mm
1800 mm
650 mm
2300 mm
1x85 Kg
50 - 100 cm/s
100 – 200 cm/s
15 - 40 cm/s
40 N - 140 N
2 m/s2
YES
50 - 100 cm/s
- -
15 - 40 cm/s
40 N - 140 N
2 m/s2
YES
230v 50-60Hz±15%
110v 50-60Hz±20%
2xAC Three-phase
VV-VF
Without reduction gear
265 W
4A
-20ºC to 65ºC
YES
230v 50-60Hz±15%
110v 50-60Hz±20%
2xAC Three-phase
VV-VF
Without reduction gear
265 W
4A
-20ºC - 65ºC
YES
BRAVO OPERATORBi-part
BRAVO OPERATORSingle slide
BRAVO OPERATORSingle slide
BRAVO OPERATORBi-part
BRAVO OPERATORSingle slide
APPLICABLE EUROPEAN STANDARD prEN 12650
Distributor:
All pictures, texts and graphics are property of Manusa.
Manusa reserves the right to modify in any moment and without previous advise the information and
technical data displayed in this brochure. All information in this brochure must be used as a reference
only and do not represent any contractual obligation.
Vía augusta, 17-19, 2º 2ª08006 Barcelona - SpainPhone. +34 93 218 37 37Fax +34 93 218 56 10
manusaAutomatic doors
Polígono Industrial Km. 1,243800 Valls - Tarragona (Spain)Tel. +34 97 760 96 01Fax +34 97 760 51 54
www.manusa.com
OFFICE (EXPORT) FACTORY
Hermetic sliding door for clean rooms
manusa
Specifically designed for use in clean rooms, the Manusa automatic door
combines high volumes of traffic whilst ensuring the maximum levels of hermetic
sealing. The range of doors offer the optimum choice for rooms where positive
pressure is needed to ensure a clean environment, meeting the most demanding
of requirements. The hermetic doors keep operating theatres or clean rooms
hygienic and thermally efficient in order to comply with regulations, whilst
providing maximum safety for the end user.
The hermetic doors are appropriate for operating theatres, hospitals, laboratories,
the chemical industry, food processing plants and any clean room environment.
AUTOMATIC SLIDING DOOR FOR CLEAN ROOMSWhen hygiene is so important as safety.
Maximum sealingand hygiene
for clean rooms
Sección Horizontal
40
CW (Clear Width)
Elevation (bi-part)Vertical section
Floo
r p
lan
AT(Min)=(2xPL)+200
HL
CW (Clear Width)
INTERIOR
EXTERIOR
20
23
AT(Min)=(2xPL)+200
ACM=500 AM=(AH/2)+40
Vertical Section
Door in open positionDoor in closed position
HT=
HL+
200
HM
=H
L+10HC
M=
400
HL
HM
=H
L+10HC
M=
400
5
20
225
180
225
manusa
180
T(Min)=(2xPL)+150INTERIOR
Floor Plan
EXTERIOR
20
23
CW (Clear Width)40
AM=AH+80
CW (Clear Width)
Vertical Section
Elevation (single slide with right side opening)
HL
T(Min)=(2xPL)+15
180
Floo
r p
lan
Vertical section
manusa
HPL SurfaceStainless SteelSurface AISI 316
Hermetic sliding door for clean rooms
RECTANGULAR VISION PANEL
TUBULAR DOOR HANDLE
Door Composition
TOUCH-LESS SWITCH ELBOW SWITCH
Hermetic sliding door for clean rooms
Automatic door with bi-part or single slide configuration,consisting of one or two door leaves that will automaticallyor manually slide to open position, leaving a wide clearopening to let people and trolleys pass through. The doorwill close firmly to seal the perimeter of the opening toinsulate the interior of the clean room.
The Bravo hermetic door operator is specially designed for use in cleanrooms. The operator will activate the door and open the hermetic leafwith a silent and smooth high-speed action whilst providing total safetyfor the end user. When closing, an incorporated guide track will directthe hermetic leaf down and against the wall, sealing the perimeter ofthe opening to keep positive pressure inside the room. This way we helpto keep a totally clean and hygienic environment inside the room. Therevolutionary design of the Bravo operator for clean rooms providesgreat flexibility and will adapt to any opening where a strong hermeticseal is required. Thick aluminium profiles frame a robust 40 mm hermeticleaf composed of:
a) Insulated core made of injected polyurethane with 50 Kg/m3 density (grade M1).b) Medium Density Fibreboard (MDF) on both sides (with stainless steel
surface).c) External surface made of stainless steel or High Pressure Laminate
(HPL).d) 6/28/6 double glaze vision panel flushed with the door surface.e) External or recessed door handles for manual operation.
You may personalise the door to any requirement, using any accessoryfrom our wide range of sensors, control and activation devices. Use ourinterface to build an interlocking gate, or the touch-less switch for extraprotection. Or connect all Manusa doors in your building to a laptop orPC for control and remote operation purposes.
Choose Manusa as your automatic door and you will benefit from theexperience and knowledge of an organization with more than 35 yearsproducing, selling and commissioning automatic doors. Our nationaland international distribution network, present in more than 40 countries,will help you find the best solution for your needs and will provide aquick and cost effective after sales service.
Air permeability Class 4 (EN 12207)
Smooth and silent operation
Robust and elegant design
Sophisticated sealing system
Different finish options available
Wide range of accessories
Can be interfaced with any BMSor alarm system
Type of leaves
Stainless steel AISI 316. Powder coated aluminium
Possibility to control from a remote PCvia ManuLink/Manutel
Standard elements Optional elements
PROGRAM SWITCHES
Optima selector (4 operating modes +
malfunction codes)
Remote control with rolling code
Interface (I/O module)
Airlock interface
"ManuLink" software: remote control
via PC
ACCESORIES
Fail-safe batteries
1 or 2 safety photocell barriers
Automatic lock
Outside key-switch
Emergency push button
External or recessed door handles
Round or rectangular vision panel
DETECTION DEVICES
Presence IR sensor
Touch-less sensor
Standard push button
Large-size push button
Push plate
Numeric access keypad
Magnetic card reader
PARAMETERS
Self-adjustment
Opening speed
Closing speed
Closing force
Malfunction alerts via display
Normal or bi-stable activation
Automatic close alter manual opening
STRUCTURAL
Perimetrical wall frame
Adjustable wall frame
Frame for operator mounting
WARRANTY
One year warranty
Five year’s warranty on motors
“ManuTel”: Remote maintenance via
GSM or landline modem
Consult factory for other colours.Green, blue or white High Pressure Laminate (HPL)
Certifications:
RECESSED DOOR HANDLE
ROUND VISION PANEL
32mm injected polyurethane 50kg/m3
4 mm HPL
4 mm HPL
4 mm MDF
1 mm stainless steel
30 mm injected polyurethane 50kg/m3
4mm MDF
1 mm stainless steel