Upload
vonhi
View
293
Download
7
Embed Size (px)
Citation preview
Release 2
Maximo User’s Guide Addendum
IBM Maximo for Utilities
First Edition (November 2006) This edition applies to Release 2 of IBM Maximo for Utilities and to all subsequent releases and modifications until otherwise indicated in new editions.
Third-Party Technology: Certain Maximo products contain technology provided under license from third parties, as noted in the following table:
Open Source: Maximo contains computer software obtained from the public domain, known as "Open Source" ownership of which is attributed as follows: Portions © 2002, Steve Souza ([email protected]). Portions © 2000-2004, Jason Hunter & Brett McLaughlin. Portions © 2004-2005, The Apache Software Foundation (http://www.apache.org/).
© Copyright International Business Machines Corporation 2006. All rights reserved.
US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
IBM Product Third-Party Information
All Products Portions © 1996-2003 Visual Mining, Inc. Visual Mining™ NetCharts Server provided by Visual Mining, Inc. © 1998-2005 Centennial Software Limited.
IBM Maximo Portions © 1995-2004 Actuate Corporation. Portions © 2005 BEA Systems, Inc. BEA WebLogic Server® provided by BEA Systems, Inc.
Portions © 1996-2005, i-net software GmbH. J-Integra for COM® v2.4. © 2004 Intrinsyc Software International, Inc.
Maximo Discovery MSDE Copyright © Microsoft® Corporation.
IBM Maximo Enterprise Asset Navigator Portions © 1993-2002 Snowbound™ Software Corporation. RasterMaster™ Raster imaging technology provided by Snowbound Software Corporation.
Portions © 1991 Pegasus Imaging Corp.
IBM Maximo Mobile Portions © 2005 DataMirror, Inc.
Portions © 2000-2005 Zaval Creative Engineering Group.
IBM Maximo Mobile SE Portions © 1996-2005 Syclo, LLC.
Note Before using this information and the product it supports, read the information in “Notices” on page Notices-1.
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vAudience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vRelated Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vSupport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Chapter 1: Administration Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Organizations Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Organizations Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1T&D Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Account Code Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Account Override Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Asset Code Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Assign Labor to Work Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Assignment Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4Configure Classifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4Configure Crafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5Configure Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6Configure Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6Configure Work Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7CU Library Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7CU Estimating Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8CU Acceptance Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8Labor Adder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9Loading Type Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9Work Type Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10Work Zone Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10General Value List Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
Chapter 2: Contracts Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Purchase Contracts (T&D) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Contract Lines Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Chapter 3: Planning Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1CU Library (T&D) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Compatible Unit Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Specifications Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3Contractor Unit Prices Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3Where Used Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
CU Library (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4Job Plans (T&D) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Job Plan Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Job Plans (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Chapter 4: Resources Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Crew Management (T&D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
© Copyright IBM Corp. 2006 iii
Crew Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Crew History Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Labor Assignments Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Tool Assignments Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Crew Management (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4Crew Types (T&D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Crew Type Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Crew Types (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Chapter 5: Work Orders Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Assignment Manager (T&D) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Table Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Crew List Table Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Assignment Manager (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3For information about these actions, refer to the Assignment Manager (T&D) help. . . . . . . . . . . . . . . . 5-3Labor Reporting (T&D) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Table Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Transactions Table Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Labor Reporting (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Quick Reporting (T&D) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Quick Reporting Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Quick Reporting (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Work Order Tracking (T&D) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Work Order Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Plans Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Actuals Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Work Order Tracking (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5CU Estimating (T&D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5Estimate Request Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5Versions Subtab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Contractors Subtab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7Costs Subtab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7Stations Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Stations Subtab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9Compatible Units Subtab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
CU Estimating (T&D) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
Chapter 6: Utilities Database Tables and Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notices-1
iv IBM Maximo for Utilities: Maximo User’s Guide Addendum
About This Guide
This section explains how this guide can help you to use IBM® Maximo® for Utilities. It also provides information about other IBM Corporation resources available to you, such as additional documentation and support.
Audience
This addendum to the IBM Maximo User’s Guide is for people who use Maximo Utilities to create and use compatible unit records for estimation scenarios, and who use crew types and crews to plan, manage, and report labor resources.
Related Documentation
You can find more information regarding Maximo Utilities in the following document:
IBM Maximo for Utilities Installation Guide
The IBM Maximo for Utilities Installation Guide is a separate document delivered in Adobe® Systems’ Portable Document Format (PDF) with the product software. The guide should be used in conjunction with the standard Maximo documentation set.
For more information about Maximo, refer to the following documentation:
Document Description
IBM Maximo Finance Manager’s Guide
Describes how IBM Maximo completes financial transactions and how to set up general ledger accounts.
IBM Maximo Installation Guide Describes how to install and configure the following software:
Application serverIBM MaximoActuate®
IBM Maximo Multisite Administrator’s Guide
Describes how to configure IBM Maximo for a Multisite implementation.
IBM Maximo Online Help Provides step-by-step procedures for Maximo applications.
© Copyright IBM Corp. 2006 v
Support
Support
IBM Corporation users with a valid Annual Customer Support Plan (ACSP) can obtain product support online at Support Online: support.mro.com.
Support Online includes information about product releases, software patches, and documentation updates. To find the most current version of a document, refer to the Knowledge Base on this site.
IBM Maximo Reconciliation Module Implementation Guide
Describes how to use the IBM Maximo Reconciliation module to reconcile the two types of information that IBM Maximo maintains about information technology (IT) assets: IT asset data and deployed asset data.
IBM Maximo Report Administration and Development Guide
Describes how to use Actuate to design and administer IBM Maximo reports.
IBM Maximo System Administrator’s Guide
Describes database configuration, security, and other administrative level applications and tasks.
IBM Maximo User’s Guide Provides an overview of the Maximo end user applications. It also describes how the IBM Maximo applications interact with each other.
IBM Maximo Workflow Implementation Guide
Provides information about how to use IBM Maximo to plan, design, build, test, implement, and manage Workflow processes.
IBM Maximo Enterprise Adapter (MEA) System Administrator's Guide
Describes how to configure and use the IBM MEA.
Document Description
vi IBM Maximo for Utilities: Maximo User’s Guide Addendum
Overview The Administration module has one application enhanced for Utilities. This chapter provides an overview of new actions added to the Organizations application. For more information, refer to the application’s help. You also can refer to the IBM Maximo User’s Guide for more information on any standard Maximo application.
The Administration module contains the following enhanced application:
Organizations Application
Overview You use the Organizations application to configure numerous settings for Utilities applications. When you configure settings, you select the organization and the site to which the settings apply. Among the settings that you choose in this application are: selecting crafts, items, and tools to use in the CU Estimating (T&D) and CU Library (T&D) applications; defining actions you want Maximo to perform when the user selects certain actions in Utilities applications; and defining account codes.
Organizations Actions
T&D Options
Organizations has the following T&D-specific actions:
Account Code OptionsAccount Override OptionsAsset Code OptionsAssign Labor to Work GroupsConfigure ClassificationsConfigure CraftsConfigure ItemsConfigure ToolsConfigure Work Groups
Administration Module 1Application T&D Function
Organizations Configure various settings for T&D specific applications; indicate crafts, items, etc. that can be used in Utilities applications; determine actions for Maximo to take upon selecting certain actions in compatible unit applications.
© Copyright IBM Corp. 2006 1-1
CU Library OptionsCU Estimating OptionsCU Acceptance OptionsLabor Adder OptionsLoading Type OptionsWork Type OptionsWork Zone OptionsGeneral Value List Options
For information about these actions, see the Organizations help.
Account Code Options
You use the Account Code Options action to define and edit account codes used in the Utilities applications. These codes specify how to account for charges based on the Federal Energy Regulatory Commission (FERC) system of accounts.
Account Code Options Dialog Box
Account Override Options
You use the Account Override Options action to define options to override the accounting code specified on the CU record in the CU Library (T&D) application or the corresponding GL account.
Organizations Application
1-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
ations Application
Account Override Options Dialog Box
Asset Code Options
You use the Asset Code Options action to enter financial codes for asset. The asset code and the accounting code together make up the unique identifier for the asset and how it is to be charged within the organization. If you do not associate an asset code with an accounting code, the asset code is valid with any accounting code.
Asset Code Options Dialog Box
Assign Labor to Work Groups
You use the Assign Labor to Work Groups action to select a work group for a labor code.
Organiz
Administration Module 1-3
Organizations Application
Assign Labor to Work Groups Dialog Box
Assignment Options
You use the Assignment Options action to configure how long resources are available and how crew duration will be calculated.
Assignment Options Dialog Box
Configure Classifications
You use the Configure Classifications action to specify which classifications in the Maximo database are valid for use in the Utilities applications.
1-4 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Organizations Application
Configure Classifications Dialog Box
Configure Crafts
You use the Configure Crafts action to specify which crafts in the Maximo database are valid for use in the Utilities applications.
Configure Crafts Dialog Box
Administration Module 1-5
Organizations Application
Configure Items
You use the Configure Items action to specify how Maximo will determine costs associated with items on compatible unit records that are used on estimate requests in the CU Estimating (T&D) application.
Configure Items Dialog Box
Configure Tools
You use the Configure Tools action to specify which tools in the Maximo database are valid for use in the Utilities applications.
Configure Tools Dialog Box
1-6 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Organizations Application
Configure Work Groups
You use the Configure Work Groups action to specify which work groups in the Maximo database are valid for use in the Utilities applications.
Configure Work Groups Dialog Box
CU Library Options
You use the CU Library Options action to define the level of version control for compatible unit records in the CU Library (T&D) application. The version control level determines what can and cannot be changed on a CU for all the records in the library.
CU Library Options Dialog Box
Administration Module 1-7
Organizations Application
CU Estimating Options
You use the CU Estimating Options to set many options that are used during the estimate generation process.
CU Estimating Options Dialog Box
CU Acceptance Options
You use the CU Acceptance Options action to define actions that Maximo will take when an estimate request is accepted.
CU Acceptance Options Dialog Box
1-8 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Organizations Application
Labor Adder Options
You use the Labor Adder Options action to set up percentage values to be used in the estimation generation process to apply to labor hours defined on a compatible unit record.
Labor Adder Options Dialog Box
Loading Type Options
You use the Loading Type Options action to define the loading/overheads that apply to each cost type. Loading types can include Company Labor, Contracted Labor, Stocked Material, Direct Purchase Material, Inside Tools, Outside Tools and Support Activities. Maximo applies the rate automatically during the estimate generation process if you have set up the estimating options to apply loading during estimate generation.
Loading Type Options Dialog Box
Administration Module 1-9
Organizations Application
Work Type Options
You use the Work Type Options action to define resource substitutions for the sub-craft on the CU record during the estimation process. Sub-crafts can vary by work group. A subcraft is a special type of resource that may exist in some locations or sites and not in others. By setting up Work Types, including sub-crafts, work groups, crafts and crew types, Maximo translates the sub-craft on the CU record to its corresponding craft or crew type within the work group specified on the estimate. Cost information is stored on craft and crew type records.
Work Type Options Dialog Box
Work Zone Options
You use the Work Zone Options action to set up codes which define geographic areas where work can take place and a Travel Factor for calculating off-site hours. The Travel Factor is applied automatically by the estimate generation process when the you select a work zone for the estimate version in the CU Estimating (T&D) application.
Work Zone Options Dialog Box
1-10 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Organizations Application
General Value List Options
You use the General Value List Options action to insert records into the general value list table and to create values which will be used against the main value in T&D processes.
General Value List Options Dialog Box
Administration Module 1-11
Organizations Application
1-12 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Overview The Contracts module has one cloned application. This chapter provides an overview of new tabs and/or fields added to the cloned application. For more information on any application, refer to the application help. You also can refer to the IBM Maximo User’s Guide for more information on any standard Maximo application.
The Contracts module contains the following T&D-specific applications:
Purchase Contracts (T&D) Application
Overview The Purchase Contracts (T&D) application has been enhanced to support purchase contracts to use on estimate requests that involve outside labor. On the contract, you identify the bid code unit, compatible unit record, and work function. Whenever the identified CU record is used on an estimate with that vendor, Maximo uses the prices defined on the contract to calculate costs. Labor hours are not defined for contracted labor, so Maximo uses internal labor/craft hours to estimate the time it will take for the contracted labor to complete the work.
Only those CU records that have their CU Bid Unit? check box selected can be used on Purchase Contracts.
Tabs
The Purchase Contracts (T&D) application has the following enhanced tab:
Contract Lines
Contracts Module 2Application T&D Function
Purchase Contracts (T&D) Create contracts to use for CU estimating involving contracted labor.
© Copyright IBM Corp. 2006 2-1
Purchase Contracts (T&D) Application
Contract Lines Tab
The Contract Lines tab has the following industry-specific fields:
CUE Bid Unit CodeSub CraftCU NameWork Function
For information about these fields, place the cursor in the field and press Alt + F1.
2-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Overview The Planning module has one Utilities-specific application and one cloned application. This chapter describes the Utilities-specific application and provides an overview of new tabs and/or fields added to the cloned application. For more information on any application, refer to the application help. You also can refer to the IBM Maximo User’s Guide for more information on any standard Maximo application.
The Planning module contains the following Utilities-specific applications:
CU Library (T&D) Application
Overview You use the CU Library (T&D) application to create, view, and edit compatible unit (CU) records and their attributes. A compatible unit contains details on the effort, materials, and tools required to perform a particular task, such as installing a cross-arm pole. The CU's details and the filters you specify on the CU record are used to create an estimate in the CU Estimating (T&D) application.
Each compatible unit corresponds with an element of construction work as specified in each utility's construction standards manual.
You can create CU hierarchies, with as many as nine levels, creating parent-child relationships among the compatible units.
Planning Module 3Application T&D Function
CU Library (T&D) Create compatible unit records, build hierarchies, specify the items, labor, and tools to use in specific work site conditions.
Job Plans (T&D) Supports the use of crew types, crews, and work groups.
© Copyright IBM Corp. 2006 3-1
Tabs
The CU Library (T&D) application has the following tabs:
ListCompatible UnitSpecificationsContractor Unit PricesWhere Used
The List tab is found throughout Maximo applications. For more information about this tab, refer to the IBM Maximo User’s Guide and the help.
For information about fields, place the cursor in the field and press Alt + F1.
Compatible Unit Tab
You use the Compatible Unit tab to create, modify, and delete compatible units. Each compatible unit defines effort, tools, or materials required to perform a particular construction task. For each detail on the record, you can use the filters to specify the conditions for which the labor, materials, and tools are appropriate.
You use the check boxes in the Control Flags section to set specific attributes of the compatible unit. These flags are used throughout the Utilities applications. Refer to the field help for information about each control.
Compatible Unit Tab
CU Library (T&D) Application
3-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
(T&D) Application
Specifications Tab
You use the Specifications tab to classify CU records. When you classify a CU, Maximo displays the classification's details in the Specifications table window.
Specifications Tab
Contractor Unit Prices Tab
You use the Contractor Unit Prices tab to view data from Blanket and Price Agreement Contracts on which the selected CU is referenced on a contract line. The fields on this tab are read-only.
Contractor Unit Prices Tab
CU Library
Planning Module 3-3
CU Library (T&D) Application
Where Used Tab
You use the Where Used tab to view a list of CU records that are parents of the selected CU record. In the Parent CUs table window, you can click View Details to see more information about the parent record. You also can delete the parent-child relationship by deleting the parent in the table window.
Where Used Tab
CU Library (T&D) Actions
CU Library (T&D) application has the following actions:
Change StatusActivate CU SetView Status HistoryCreate New CU VersionDuplicate CU VersionDuplicate CUDelete CU VersionDelete CU
For information about these actions, refer to the CU Library (T&D) help.
3-4 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Job Plans (T&D) Application
Job Plans (T&D) Application
Overview New fields have been added to Job Plans (T&D) to support the use of crews. You set up crew types in the Crew Types (T&D) application and you create crews in the Crew Management (T&D) application.
When you create a job plan in the Job Plans (T&D) application, you can now plan for crew types or specific crews on the job plan.
Tabs
The Job Plans (T&D) application has the following enhanced tab:
Job Plan
Job Plan Tab
The Job Plan tab has the following industry-specific field:
Work Group
Labor Subtab The Labor subtab has the following industry-specific fields:
Work GroupCrew TypeCrew
For information about these fields, place the cursor in the field and press Alt + F1.
Job Plans (T&D) Actions
There are no Utilities-specific actions in Job Plans (T&D).
Planning Module 3-5
Job Plans (T&D) Application
3-6 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Overview The Resources module has two Utilities-specific applications. This chapter describes the Utilities-specific applications. For more information on any application, refer to the application help. You also can refer to the IBM Maximo User’s Guide for more information on any standard Maximo application.
The Resources module contains the following Utilities-specific applications:
Crew Management (T&D)
Overview You use the Crew Management (T&D) application to define, plan and schedule labor resources to a crew. A crew is comprised of labor and tools or assets that are required to perform a specific type of job. When you use a crew type to build your crew, the required crafts, qualifications, and tools needed for the crew are displayed on the Crew tab. Using the crew type requirements, you can be sure that you assign all of the necessary resources to the crew.
When you create a crew, you can associate the crew with a calendar and shift, and specify the time period that each member is assigned to the crew.
You assign crews to work orders using Work Order Tracking (T&D) or Assignment Manager (T&D) applications; you can report the hours a crew worked using the Labor Reporting (T&D), Work Order Tracking (T&D), and Quick Reporting (T&D) applications.
You also use the Crew Management (T&D) application to view reported actuals for members of a crew, and to see who has held or will hold positions on the crew, historically, currently, and in the future.
Resources Module 4Application T&D Function
Crew Management (T&D) Define, plan, and schedule labor resources to a crew; view actuals for work completed by crew members, and view historical information about the crew.
Crew Types (T&D) Create crew types, including the required qualifications that members of the crew must have to be on the crew.
© Copyright IBM Corp. 2006 4-1
Tabs
The Crew Management (T&D) application has the following tabs:
ListCrewCrew HistoryLabor AssignmentsTool Assignments
The List tab is found throughout Maximo applications. For more information about this tab, refer to the IBM Maximo User’s Guide and the help.
For information about fields, place the cursor in the field and press Alt + F1.
Crew Tab
You use the Crew tab to create a crew, defining the labor positions, tool resources, and qualifications that the crew requires to perform its work. You can use a crew type to build the crew. When you specify a crew type, Maximo copies the crew type's positions and crafts, qualifications, and tool resources to the Required Crafts, Required Qualifications, and Required Tools table windows.
You can add positions, qualifications and tools to the crew. You also can assign labor and tools to the crew that do not meet the requirements of the crew. Maximo displays a warning message when you do so. You can only delete positions and tools if they do not have any labor or tool assets assigned to them.
Crew Tab
Crew Management (T&D)
4-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
anagement (T&D)
Crew History Tab
You use the Crew History tab to view the labor and tools that were reported for work performed by the selected crew. You report work in the Labor Reporting (T&D), Work Order Tracking (T&D), and Quick Reporting (T&D) applications.
You can use the filter in the Date column in the Required Crafts table window to specify a reporting date.
Crew History Tab
Labor Assignments Tab
You use the Labor Assignments tab to assign labor to a crew, or to modify a current labor assignment. For each position in a crew, the tab displays a list of all labors assigned to that position on the selected crew in the past, currently, and in the future.
Once you assign labor to a crew, that labor is not available to be assigned to a work order. You can assign internal or outside labor (contractor) to a crew. When you select labor to assign to a crew, if its craft, skill level, qualification, certification, or availability do not match the specified requirements of the crew, Maximo displays a notification message. You can, however, still assign labor whose details do not match the crew requirements.
Crew M
Resources Module 4-3
Labor Assignments Tab
Tool Assignments Tab
You use the Tool Assignments tab to assign specific tool assets to a crew, or to modify a current tool assignment. For each tool you assign, you can specify the time period for which the tool is assigned to that crew.
You can assign a tool to only one crew at a time.
Tool Assignments Tab
Crew Management (T&D) Actions
Crew Management (T&D) has the following actions:
Change StatusView Labor AssignmentsView Status HistoryView Work OrdersDuplicate Crew Delete Crew
For information about these actions, see and the Crew Management (T&D) help.
Crew Management (T&D)
4-4 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Crew Types (T&D)
Crew Types (T&D)
Overview You use the Crew Types (T&D) application to define the crafts, qualifications, and tools that compose a crew that will perform a certain type of work.
For example, an overhead line crew type (OHLINE) consists of one lineman and two helpers, a bucket truck and a utility trailer. When you assign the OHLINE crew type to a compatible unit (CU) record or a work order, those resources will be used to calculate the estimated cost. You also can use crew types to build a job plan in the Job Plans (T&D) application, and to define crews in Crew Management (T&D).
A crew type can have one of two statuses, Active or Inactive. When you set a crew type’s status to Inactive, you cannot use that crew type in other Utilities applications.
Tabs
The Crew Types (T&D) application has the following tabs:
ListCrew Type
The List tab is found throughout Maximo applications. For more information about this tab, refer to the IBM Maximo User’s Guide and the help.
For information about fields, place the cursor in the field and press Alt + F1.
Crew Type Tab
You use the Crew Type tab to create, modify, and view crew type records. A crew type consists of the required crafts, qualifications, and tools or assets needed to perform a specific type of work.
In the Required Crafts table window, you identify unique positions for each craft on the crew.
In the Required Qualifications table window, you add qualifications either specific to a position on the crew or that can be held by any crew member. You also view qualifications that are associated with any of the tools assigned to the crew type.
In the Required Tools table window, you add tools that are needed to perform the work. If a tool requires the person using that tool to hold certain qualifications, Maximo displays those qualifications in the Required Qualifications table window.
For information about fields, place the cursor in the field and press Alt + F1.
Resources Module 4-5
Crew Type Tab
Crew Types (T&D) Actions
Crew Types (T&D) has the following actions:
Update Crew Hourly RatesChange StatusView Status HistoryOverride Average Hourly RateDelete Crew TypeDuplicate Crew Type
For information about these actions, see and the Crew Types (T&D) help.
Crew Types (T&D)
4-6 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Overview The Work Orders module has one Utilities specific application and four cloned applications. This chapter describes the new application, and provides an overview of new tabs and/or fields added to the cloned applications. For more information on any application, refer to the application help. You also can refer to the IBM Maximo User’s Guide for more information on any standard Maximo application.
The Work Orders module contains the following Utilities-specific applications:
Work Orders Module 5Application T&D Function
Assignment Manager (T&D) Assign work to crews based on requirements and availability; filter work to match the available crews; filter crews to match the work requirements.
Labor Reporting (T&D) Report hours worked by crew; change the labor codes as needed on the crew when reporting their time.
Quick Reporting (T&D) Report hours worked by crew.
Work Order Tracking (T&D) Create work plans using crew types or crews; report actuals by crews.
CU Estimating (T&D) Create design and construction scenarios; perform and accept estimates.
© Copyright IBM Corp. 2006 5-1
Assignment Manager (T&D) Application
Assignment Manager (T&D) Application
Overview You use the Assignment Manager (T&D) application to dispatch labor or crews and schedule their work. You can filter the work list to match the available crews, and you can filter the crew list to match the requirements of the work.
Table Window
The Assignment Manager (T&D) application contains three table windows.
The application has one new T&D table window:
Crew List
For information about this table window, refer to the Assignment Manager (T&D) help.
For information about fields, place the cursor in the field and press Alt + F1. You can access field information for the fields in the Work List table window only.
Crew List Table Window
The Crew List table window has the following fields:
CrewDescriptionCrew TypeWork GroupShift% Allocation
Crew List Table Window
5-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
For information about these actions, refer to the Assignment Manager (T&D) help.
Assignment Manager (T&D) Actions
Assignment Manager (T&D) has the following industry-specific actions:
Filter Work to Match CrewFilter Crew to Match WorkAssign CrewSelect Crew QueryShow All CrewRefresh the Crew List
For information about these actions, refer to the Assignment Manager (T&D) help.
Labor Reporting (T&D) Application
Overview Labor Reporting (T&D) supports reporting time by crews.
Table Window
The Labor Reporting (T&D) application contains a single table window.
Transactions Table Window
The transactions table window in Labor Reporting (T&D) has the following new fields:
Work GroupCrewPosition
For information about these fields, place the cursor in the field and press Alt + F1.
Labor Reporting (T&D) Actions
Labor Reporting (T&D) has the following industry-specific action:
Enter by Crew
For information about this action, see the Labor Reporting (T&D) help.
Quick Reporting (T&D) Application
Overview Quick Reporting (T&D) supports reporting time by crews.
Tabs
The Quick Reporting (T&D) application has the following enhanced tab:
Work Orders Module 5-3
Work Order Tracking (T&D) Application
Quick Reporting
For information about fields, place the cursor in the field and press Alt + F1.
Quick Reporting Tab
The Quick Reporting tab has the following new field:
Crew
Quick Reporting (T&D) Actions
Quick Reporting (T&D) has the following industry-specific action:
Enter Time by Crew
For information about this actions, see the Quick Reporting (T&D) help.
Work Order Tracking (T&D) Application
Overview Work Order Tracking (T&D) supports creating work plans with crew types or crews, and reporting actuals for crews.
Tabs
The Work Order Tracking (T&D) application has the following enhanced tabs:
Work OrderPlansActuals
For information about fields, place the cursor in the field and press Alt + F1.
Work Order Tab
The Work Order tab has the following new field:
Work Group
Plans Tab
Labor Subtab The Labor subtab has the following new fields:
Work GroupCrew TypeCrew
Actuals Tab
Labor Subtab The Labor subtab has the following new field:
Crew
5-4 IBM Maximo for Utilities: Maximo User’s Guide Addendum
CU Estimating (T&D)
Work Order Tracking (T&D) Actions
Work Order Tracking (T&D) has the following industry-specific action:
Enter Time by Crew
CU Estimating (T&D)
Overview You use the CU Estimating (T&D) application to create design and construction scenarios and estimate their appropriate costs. You use the compatible unit (CU) records that you create in the CU Library (T&D) application as building blocks to create the scenarios. For each estimate, you select the CUs and apply the various filters to specify the conditions for each scenario.
The estimation process calculates and stores job version details for analysis using Actuate reports. The reports show summarized information of costs against the version. When you accept an estimated version, Maximo generates a work order based on the estimate.
Tabs
The CU Estimating (T&D) application has the following tabs:
Estimate RequestVersions subtabContractors subtabCosts subtabStationsStations subtabCompatible Units subtab
The List tab is found throughout Maximo applications. For more information about this tab, refer to the IBM Maximo User’s Guide and the help.
For information about fields, place the cursor in the field and press Alt + F1.
Estimate Request Tab
You use the Estimate Request tab to create, modify, or view estimate scenarios. For each request, you specify its request type, and you can select a target work order for the request.
The Estimate Request tab contains attributes related to an estimate as well as some additional control information.
Work Orders Module 5-5
CU Estimating (T&D)
Estimate Request Tab
Versions Subtab
You use the Versions subtab to specify the details of the estimate. You can create multiple versions of an estimate, each with different parameters.
Maximo copies the values you set in the default parameter and Filters fields to the Stations subtab on the Stations tab for all stations on this estimate. You can modify the filter selections on each station's record on the subtab.
You should select Material, Labor, and/or Accounting Filters on the Versions subtab to apply to the compatible units. If you leave a filter NULL, Maximo will select only CU details (Child CUs, Material details, Labor details, and/or Tool details) where the corresponding filter is NULL. For example, if the Labor details for a CU specify one Labor detail for Hot work and another for Cold work, neither one will be selected by the estimation process if the Hot/Cold field is NULL on the Version sub tab and the Stations subtab on the estimate request.
5-6 IBM Maximo for Utilities: Maximo User’s Guide Addendum
CU Estimating (T&D)
Versions Subtab
Contractors Subtab
You use the Contractors subtab to enter information about contract labor if any part of the work to be estimated is going to be completed by outside labor rather than company crews.
Contractors Subtab
Costs Subtab
You use the Costs subtab to view the costs for the estimate. When you perform a quote or an estimate, Maximo displays the calculated costs here.
Work Orders Module 5-7
CU Estimating (T&D)
Costs Subtab
Stations Tab
You use the Stations tab's subtabs to specify details about the work to be performed at specific locations for each version of the estimate.
5-8 IBM Maximo for Utilities: Maximo User’s Guide Addendum
CU Estimating (T&D)
On the Estimate Request tab, you select the version from the Version subtab for which you want to create station records before displaying the Stations tab. The version you selected will be displayed in the Version field on the Station tab.
Stations Tab
Stations Subtab
You use the Stations subtab to specify details about where the work is to be done. A station is a point at a location. A station can, but does not have to be, a Maximo location.
Each version of an estimate can have its own stations. On the Estimate Request tab, you select the version from the Version subtab for which you want to create station records before displaying the Stations subtab. The version you selected will be displayed in the Version field on the Station subtab.
Stations Subtab
Work Orders Module 5-9
CU Estimating (T&D)
Compatible Units Subtab
You use the Compatible Units subtab to enter CU records to identify the work that needs to be done at each station.
The filters and parameters established at the version, station, and/or work set level control which details get selected by the estimation generation process for a particular CU record.
The Compatible Units table window shows the compatible units associated with a station/work set. The records display based on the station you select in the Station/Work Set table window.
The Quantities fields in the Compatible Units detail window indicates how many of the entered CUs are required to be installed, removed, transferred, and/or abandoned at the specified station and whether the site is hot or cold. This is the only filter carried to the CU level.
Compatible Units Subtab
CU Estimating (T&D) Actions
CU Estimating (T&D) has the following industry-specific actions:
Rename a StationChange StatusView Status HistoryPerform EstimationPerform QuotePerform AcceptanceDuplicate EstimateDuplicate VersionDuplicate Station
5-10 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Overview This chapter lists new, utilities-specific database tables and their columns, and also lists new columns added to existing Maximo database tables.
ASSET Table
ASSIGNMENT Table
CLASSSPEC Table
CLASSSTRUCTURE Table
CONTRACTLINE Table
Utilities Database Tables and Columns 6
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCUREQVALUE N UPPER 22
PLUSDCUSEQUENCE Y NUMBER 22
PLUSDUSEINCUDESC N NUMBER 22
PLUSDUSEINCUSPEC N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
PLUSDUSEWITHTND N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
© Copyright IBM Corp. 2006 6-1
CRAFT Table
ITEM Table
JOBLABOR Table
JOBPLAN Table
PLUSDCUEBIDUNIT Y VARCHAR2 1
PLUSDCUEWORKTYPE Y VARCHAR2 4
PLUSDCUNAME Y VARCHAR2 25
PLUSDLOADUNITCST Y NUMBER 22
PLUSDTAXPERUNIT Y NUMBER 22
PLUSDWORKFUNCTION Y VARCHAR2 1
COLUMN NULLS MAXTYPE LENGTH
PLUSDISVALIDCRAFT N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
PLUSDCUESALVAGEPCT Y NUMBER 22
PLUSDCUEUNITCOST Y NUMBER 22
PLUSDCUEUOM Y VARCHAR2 8
PLUSDTOOL N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDWORKGROUP Y VARCHAR2 8
6-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
JOBTASK Table
LABOR Table
LABTRANS Table
MAXUSER Table
MODAVAIL Table
PERSONGROUP Table
COLUMN NULLS MAXTYPE LENGTH
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDPOSITION Y VARCHAR2 8
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDDEFSTORERM Y VARCHAR2 8
PLUSDDEFWORKGRP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDWORKGROUP N NUMBER 22
Utilities Database Tables and Columns 6-3
PLUSDACGDETAIL Table
COLUMN NULLS MAXTYPE LENGTH
ACGDETAILKEY N VARCHAR2 20
APPLIEDCONTRIBAMT N NUMBER 22
ASSETCODE Y VARCHAR2 8
ASSETQTY Y NUMBER 22
BACKTOSTN Y VARCHAR2 3
BACKTOSTNKEY Y NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CPRLOCATION Y VARCHAR2 4
ERRORFLAG N NUMBER 22
ERRORMESSAGE Y VARCHAR2 254
ESTVERSION N NUMBER 22
FINANCIALWO Y VARCHAR2 10
GLACCOUNT Y VARCHAR2 23
LBRCOSTIN N NUMBER 22
LBRCOSTOUT N NUMBER 22
LDGCOST N NUMBER 22
MASTERWONUM Y VARCHAR2 10
MATLCOSTIN N NUMBER 22
MATLCOSTOUT N NUMBER 22
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PLANTACCT Y VARCHAR2 4
PLUSDACGDETAILID N NUMBER 22
PLUSDACGDETAILID N NUMBER 22
RECORDTYPE Y VARCHAR2 3
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SALVAGEAMT N NUMBER 22
SERVICECOST N NUMBER 22
SITEID Y VARCHAR2 8
STATION Y VARCHAR2 3
6-4 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCREW Table
STATIONKEY Y NUMBER 22
TASKID Y NUMBER 22
TOOLCOSTIN N NUMBER 22
TOOLCOSTOUT N NUMBER 22
UNITCOST Y NUMBER 22
UOM Y VARCHAR2 8
VINTAGEYEAR Y VARCHAR2 4
WONUM Y VARCHAR2 10
COLUMN NULLS MAXTYPE LENGTH
CALNUM Y VARCHAR2 8
CREW N VARCHAR2 8
CREWTYPE N VARCHAR2 8
DESCRIPTION Y VARCHAR2 50
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
ORGID N VARCHAR2 8
PLUSDCREWID N NUMBER 22
PLUSDCREWID N NUMBER 22
ROWSTAMP N VARCHAR2 40
SHIFTNUM Y VARCHAR2 8
STATUS N VARCHAR2 8
VENDOR Y VARCHAR2 12
WORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-5
PLUSDCREWLABOR Table
COLUMN NULLS MAXTYPE LENGTH
CALNUM Y VARCHAR2 8
CONTRACTNUM Y VARCHAR2 8
CRAFT Y VARCHAR2 8
CREW N VARCHAR2 8
EFFECTIVEDATE N DATE 7
ENDDATE Y DATE 7
HASLD N NUMBER 22
LABORCODE N VARCHAR2 8
ORGID N VARCHAR2 8
PLUSDCREWLABORID N NUMBER 22
PLUSDCREWLABORID N NUMBER 22
POSITION N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SHIFTNUM Y VARCHAR2 8
SKILLLEVEL Y VARCHAR2 12
VENDOR Y VARCHAR2 12
6-6 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCREWLABPOS Table
PLUSDCREWQUAL Table
COLUMN NULLS MAXTYPE LENGTH
CONTRACTNUM Y VARCHAR2 8
CRAFT N VARCHAR2 8
CREW N VARCHAR2 8
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
ORGID N VARCHAR2 8
PLUSDCREWLABPOSID N NUMBER 22
PLUSDCREWLABPOSID N NUMBER 22
POSITION N VARCHAR2 8
REMARKS Y VARCHAR2 50
ROWSTAMP N VARCHAR2 40
SKILLLEVEL Y VARCHAR2 12
VENDOR Y VARCHAR2 12
COLUMN NULLS MAXTYPE LENGTH
CREW N VARCHAR2 8
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
ORGID N VARCHAR2 8
PLUSDCREWQUALID N NUMBER 22
PLUSDCREWQUALID N NUMBER 22
POSITION Y VARCHAR2 8
QUALIFICATIONID N VARCHAR2 8
QUANTITY Y NUMBER 22
REMARKS Y VARCHAR2 50
ROWSTAMP N VARCHAR2 40
TOOL N NUMBER 22
Utilities Database Tables and Columns 6-7
PLUSDCREWSTATHIS Table
PLUSDCREWT Table
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 30
CHANGEDATE N DATE 7
CREW N VARCHAR2 8
MEMO Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDCREWSTATHISID N NUMBER 22
PLUSDCREWSTATHISID N NUMBER 22
ROWSTAMP N VARCHAR2 40
STATUS N VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
AVGHOURLYRATE Y NUMBER 22
CREWTYPE N VARCHAR2 8
DESCRIPTION Y VARCHAR2 100
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
LDKEY Y NUMBER 22
ORGID N VARCHAR2 8
PLUSDCREWTID N NUMBER 22
PLUSDCREWTID N NUMBER 22
ROWSTAMP N VARCHAR2 40
STATUS Y VARCHAR2 8
6-8 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCREWTOOL Table
PLUSDCREWTOOLSQ Table
COLUMN NULLS MAXTYPE LENGTH
ASSETNUM N VARCHAR2 12
CALNUM Y VARCHAR2 8
CREW N VARCHAR2 8
EFFECTIVEDATE N DATE 7
ENDDATE Y DATE 7
ORGID N VARCHAR2 8
PLUSDCREWTOOLID N NUMBER 22
PLUSDCREWTOOLID N NUMBER 22
ROWSTAMP N VARCHAR2 40
SHIFTNUM Y VARCHAR2 8
TOOLSEQ N VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
CREW N VARCHAR2 8
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
ITEMNUM N VARCHAR2 30
ITEMSETID N VARCHAR2 8
ORGID N VARCHAR2 8
PLUSDCREWTOOLSQID N NUMBER 22
PLUSDCREWTOOLSQID N NUMBER 22
REMARKS Y VARCHAR2 50
ROWSTAMP N VARCHAR2 40
TOOLSEQ N VARCHAR2 8
Utilities Database Tables and Columns 6-9
PLUSDCREWWOLAB Table
PLUSDCREWWOTL Table
COLUMN NULLS MAXTYPE LENGTH
CONTRACTNUM Y VARCHAR2 8
CRAFT Y VARCHAR2 8
CREW Y VARCHAR2 8
LABORCODE N VARCHAR2 8
NAME Y VARCHAR2 62
ORGID N VARCHAR2 8
POSITION N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SKILLLEVEL Y VARCHAR2 12
TASKID Y NUMBER 22
VENDOR Y VARCHAR2 12
WONUM Y VARCHAR2 10
COLUMN NULLS MAXTYPE LENGTH
ASSET Y VARCHAR2 12
ASSETDESCRIPTION Y VARCHAR2 100
ASSETNUM Y VARCHAR2 12
CREW Y VARCHAR2 8
ORGID N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
TASKID Y NUMBER 22
TOOLNUM Y VARCHAR2 30
TOOLSEQ Y VARCHAR2 8
WONUM Y VARCHAR2 10
6-10 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCRWMODAVAIL Table
PLUSDCTCRAFT Table
COLUMN NULLS MAXTYPE LENGTH
ENDTIME Y DATE 7
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWID Y VARCHAR2 8
PLUSDCRWMODAVAILID N NUMBER 22
PLUSDCRWMODAVAILID N NUMBER 22
REASONCODE Y VARCHAR2 16
ROWSTAMP N VARCHAR2 40
STARTTIME Y DATE 7
WORKDATE Y DATE 7
WORKHOURS Y FLOAT 22
COLUMN NULLS MAXTYPE LENGTH
CONTRACTNUM Y VARCHAR2 8
CRAFT N VARCHAR2 8
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
LDKEY Y NUMBER 22
ORGID Y VARCHAR2 8
PLUSDCTCRAFTID N NUMBER 22
PLUSDCTCRAFTID N NUMBER 22
Utilities Database Tables and Columns 6-11
PLUSDCTQUAL Table
PLUSDCTSTATHIST Table
COLUMN NULLS MAXTYPE LENGTH
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
LDKEY Y NUMBER 22
ORGID Y VARCHAR2 8
PLUSDCTQUALID N NUMBER 22
PLUSDCTQUALID N NUMBER 22
POSITION Y VARCHAR2 8
QUALIFICATIONID N VARCHAR2 8
QUANTITY Y NUMBER 22
REMARKS Y VARCHAR2 50
ROWSTAMP N VARCHAR2 40
TOOL N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY Y VARCHAR2 18
CHANGEDATE Y DATE 7
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
MEMO Y VARCHAR2 50
ORGID Y VARCHAR2 8
PLUSDCTSTATHISTID N NUMBER 22
PLUSDCTSTATHISTID N NUMBER 22
ROWSTAMP N VARCHAR2 40
STATUS Y VARCHAR2 8
6-12 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCTTOOL Table
PLUSDCU Table
COLUMN NULLS MAXTYPE LENGTH
CREWTYPE Y VARCHAR2 8
HASLD N NUMBER 22
ITEMNUM Y VARCHAR2 30
ITEMSETID Y VARCHAR2 8
LANGCODE Y VARCHAR2 4
LDKEY Y NUMBER 22
ORGID Y VARCHAR2 8
PLUSDCTTOOLID N NUMBER 22
PLUSDCTTOOLID N NUMBER 22
REMARKS Y VARCHAR2 50
RESOURCEID N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
TOOLSEQ Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
ACCTCODE Y VARCHAR2 6
ASSETCODE Y VARCHAR2 8
AUTOEXPANDFLAG N NUMBER 22
BIDUNITFLAG N NUMBER 22
BUDGETFLAG N NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CLASSSTRUCTUREID Y VARCHAR2 20
CUDETAILFLAG N NUMBER 22
CULEVELNUM N NUMBER 22
CUNAME N VARCHAR2 25
CUUPDATESET Y VARCHAR2 8
CUVERSION N NUMBER 22
DESCRIPTION Y VARCHAR2 100
EXPANDABLEFLAG N NUMBER 22
Utilities Database Tables and Columns 6-13
FINANCIALWO Y VARCHAR2 10
HASLD N NUMBER 22
HISTORYFLAG N NUMBER 22
JOBINSTRUCTIONFLAG N NUMBER 22
LANGCODE Y VARCHAR2 4
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDCUID N NUMBER 22
PLUSDCUID N NUMBER 22
ROWSTAMP N VARCHAR2 40
SKETCHFEATUREFLAG N NUMBER 22
SPANFLAG N NUMBER 22
STANDARDSSHEET Y VARCHAR2 12
STATIONDETAILFLAG N NUMBER 22
STATISTICALCODE Y VARCHAR2 4
STATUS N VARCHAR2 8
STATUSDATE N DATE 7
SUPPORTFLAG N NUMBER 22
UOM Y VARCHAR2 8
WFACTIVE N NUMBER 22
WFID Y NUMBER 22
WORKTYPE Y VARCHAR2 4
YEARFLAG N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
6-14 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCUCONTROL Table
PLUSDCUDETAIL Table
COLUMN NULLS MAXTYPE LENGTH
ACTIVEVERSION Y NUMBER 22
CUNAME N VARCHAR2 25
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PENDINGVERSION Y NUMBER 22
PLUSDCUCONTROLID N NUMBER 22
PLUSDCUCONTROLID N NUMBER 22
ROWSTAMP N VARCHAR2 40
COLUMN NULLS MAXTYPE LENGTH
ABSOLUTEQTYFLAG N NUMBER 22
ACCTCODE Y VARCHAR2 6
ACGFILTER01 Y VARCHAR2 1
ACGFILTER02 Y VARCHAR2 1
ACGFILTER03 Y VARCHAR2 1
ACGFILTER04 Y VARCHAR2 1
ACGFILTER05 Y VARCHAR2 1
ACGFILTER06 Y VARCHAR2 1
ACGFILTER07 Y VARCHAR2 1
ACGFILTER08 Y VARCHAR2 1
ACGFILTER09 Y VARCHAR2 1
ACGFILTER10 Y VARCHAR2 1
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CHILDCUNAME N VARCHAR2 25
CHILDCUVERSION Y NUMBER 22
CUDETAILKEY Y NUMBER 22
LABORFILTER01 Y VARCHAR2 1
LABORFILTER02 Y VARCHAR2 1
LABORFILTER03 Y VARCHAR2 1
Utilities Database Tables and Columns 6-15
LABORFILTER04 Y VARCHAR2 4
LABORFILTER05 Y VARCHAR2 1
LABORFILTER06 Y VARCHAR2 1
LABORFILTER07 Y VARCHAR2 1
LABORFILTER08 Y VARCHAR2 1
LABORFILTER09 Y VARCHAR2 1
LABORFILTER10 Y VARCHAR2 1
MATERIALFILTER01 Y VARCHAR2 1
MATERIALFILTER02 Y VARCHAR2 4
MATERIALFILTER03 Y VARCHAR2 2
MATERIALFILTER04 Y VARCHAR2 1
MATERIALFILTER05 Y VARCHAR2 1
MATERIALFILTER06 Y VARCHAR2 1
MATERIALFILTER07 Y VARCHAR2 1
MATERIALFILTER08 Y VARCHAR2 1
MATERIALFILTER09 Y VARCHAR2 1
MATERIALFILTER10 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PARENTCUNAME N VARCHAR2 25
PARENTCUVERSION N NUMBER 22
PLUSDCUDETAILID N NUMBER 22
PLUSDCUDETAILID N NUMBER 22
QUANTITY N NUMBER 22
ROWSTAMP N VARCHAR2 40
WORKFUNCTION Y VARCHAR2 1
COLUMN NULLS MAXTYPE LENGTH
6-16 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCUEACTCODE Table
COLUMN NULLS MAXTYPE LENGTH
ACCTCODE N VARCHAR2 6
CAPCONTRIBGLACCT Y VARCHAR2 23
CAPITALFLAG N NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
INSTALLGLACCT Y VARCHAR2 23
LANGCODE Y VARCHAR2 4
OMCONTRIBGLACCT Y VARCHAR2 23
OMGLACCT Y VARCHAR2 23
ORGID N VARCHAR2 8
PLANTACCT Y VARCHAR2 4
PLUSDCUEACTCODEID N NUMBER 22
PLUSDCUEACTCODEID N NUMBER 22
REMOVEGLACCT Y VARCHAR2 23
ROWSTAMP N VARCHAR2 40
SALVAGEGLACCT Y VARCHAR2 23
Utilities Database Tables and Columns 6-17
PLUSDCUEACTOVRD Table
PLUSDCUEASSTCDE Table
COLUMN NULLS MAXTYPE LENGTH
ACCTCODE Y VARCHAR2 6
ACCTOVRD N VARCHAR2 2
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
ORGID N VARCHAR2 8
PLUSDCUEACTOVRDID N NUMBER 22
PLUSDCUEACTOVRDID N NUMBER 22
ROWSTAMP N VARCHAR2 40
RULECODE N VARCHAR2 2
COLUMN NULLS MAXTYPE LENGTH
ACCTCODE N VARCHAR2 6
ASSETCODE N VARCHAR2 8
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
ORGID N VARCHAR2 8
PLUSDCUEASSTCDEID N NUMBER 22
PLUSDCUEASSTCDEID N NUMBER 22
ROWSTAMP N VARCHAR2 40
6-18 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCUELBRADDR Table
PLUSDCUELOADTYP Table
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
FILTERVALUE N VARCHAR2 4
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
LBRFILTER N VARCHAR2 5
ORGID N VARCHAR2 8
PCTGADDER Y NUMBER 22
PLUSDCUELBRADDRID N NUMBER 22
PLUSDCUELBRADDRID N NUMBER 22
ROWSTAMP N VARCHAR2 40
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
COMPANYLBRFLAG N NUMBER 22
CONTRACTLBRFLAG N NUMBER 22
DESCRIPTION Y VARCHAR2 50
DIRECTPURCHMTLFLAG N NUMBER 22
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
INTOOLSFLAG N NUMBER 22
LANGCODE Y VARCHAR2 4
LOADINGRATE Y NUMBER 22
LOADINGTYPE N NUMBER 22
ORGID N VARCHAR2 8
OUTTOOLSFLAG N NUMBER 22
PLUSDCUELOADTYPID N NUMBER 22
Utilities Database Tables and Columns 6-19
PLUSDCUEWORKZNE Table
PLUSDCUEWRKTYPE Table
PLUSDCUELOADTYPID N NUMBER 22
ROWSTAMP N VARCHAR2 40
STORESMTLSFLAG N NUMBER 22
SUPPORTACTFLAG N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
ORGID N VARCHAR2 8
PLUSDCUEWORKZNEID N NUMBER 22
PLUSDCUEWORKZNEID N NUMBER 22
ROWSTAMP N VARCHAR2 40
TRAVELFCTR Y NUMBER 22
WORKZONE N VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CRAFT Y VARCHAR2 8
CREWTYPE Y VARCHAR2 8
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
ORGID N VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
6-20 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCUEWRKTYPEID N NUMBER 22
PLUSDCUEWRKTYPEID N NUMBER 22
ROWSTAMP N VARCHAR2 40
SUBCRAFT N VARCHAR2 4
WORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-21
PLUSDCULABOR Table
COLUMN NULLS MAXTYPE LENGTH
ABANDONHOURS N NUMBER 22
ABSOLUTEHOURSFLAG N NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CRAFT Y VARCHAR2 8
CREWTYPE Y VARCHAR2 8
CULABORKEY Y NUMBER 22
CUNAME N VARCHAR2 25
CUVERSION N NUMBER 22
HOURLYRATE Y NUMBER 22
INSTALLHOURS N NUMBER 22
LABORFILTER01 Y VARCHAR2 1
LABORFILTER02 Y VARCHAR2 1
LABORFILTER03 Y VARCHAR2 1
LABORFILTER04 Y VARCHAR2 4
LABORFILTER05 Y VARCHAR2 1
LABORFILTER06 Y VARCHAR2 1
LABORFILTER07 Y VARCHAR2 1
LABORFILTER08 Y VARCHAR2 1
LABORFILTER09 Y VARCHAR2 1
LABORFILTER10 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PCTADDERFLAG01 N NUMBER 22
PCTADDERFLAG02 N NUMBER 22
PCTADDERFLAG03 N NUMBER 22
PCTADDERFLAG04 N NUMBER 22
PCTADDERFLAG05 Y VARCHAR2 1
PCTADDERFLAG06 Y VARCHAR2 1
PCTADDERFLAG07 Y VARCHAR2 1
PCTADDERFLAG08 Y VARCHAR2 1
PCTADDERFLAG09 Y VARCHAR2 1
6-22 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PCTADDERFLAG10 Y VARCHAR2 1
PLUSDCULABORID N NUMBER 22
PLUSDCULABORID N NUMBER 22
RATEHASCHANGED N NUMBER 22
REMOVEHOURS N NUMBER 22
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
TRANSFERHOURS N NUMBER 22
WORKFUNCTION Y VARCHAR2 1
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-23
PLUSDCUMATERIAL Table
COLUMN NULLS MAXTYPE LENGTH
CATALOGCODE Y VARCHAR2 30
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CUMATERIALKEY Y NUMBER 22
CUNAME N VARCHAR2 25
CUVERSION N NUMBER 22
DESCRIPTION Y VARCHAR2 100
DIRECTPURCHASEFLAG N NUMBER 22
HASLD N NUMBER 22
ITEMNUM Y VARCHAR2 30
ITEMSETID Y VARCHAR2 8
LANGCODE Y VARCHAR2 4
LINECOST Y NUMBER 22
MANUFACTURER Y VARCHAR2 8
MATERIALFILTER01 Y VARCHAR2 1
MATERIALFILTER02 Y VARCHAR2 4
MATERIALFILTER03 Y VARCHAR2 2
MATERIALFILTER04 Y VARCHAR2 1
MATERIALFILTER05 Y VARCHAR2 1
MATERIALFILTER06 Y VARCHAR2 1
MATERIALFILTER07 Y VARCHAR2 1
MATERIALFILTER08 Y VARCHAR2 1
MATERIALFILTER09 Y VARCHAR2 1
MATERIALFILTER10 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
MODELNUM Y VARCHAR2 8
ORGID N VARCHAR2 8
OVERRIDESTORELOC Y VARCHAR2 8
PLUSDCUMATERIALID N NUMBER 22
PLUSDCUMATERIALID N NUMBER 22
QUANTITY N NUMBER 22
ROWSTAMP N VARCHAR2 40
6-24 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDCUSPEC Table
SITEID Y VARCHAR2 8
STORELOC Y VARCHAR2 8
UNITCOST Y NUMBER 22
UNITCOSTHASCHANGED N NUMBER 22
UOM N VARCHAR2 8
VENDOR Y VARCHAR2 8
WORKFUNCTION Y VARCHAR2 1
COLUMN NULLS MAXTYPE LENGTH
ALNVALUE Y VARCHAR2 16
ASSETATTRID Y VARCHAR2 8
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CLASSSTRUCTUREID Y VARCHAR2 20
CUNAME N VARCHAR2 25
CUS01 Y VARCHAR2 10
CUS02 Y VARCHAR2 10
CUS03 Y VARCHAR2 10
CUS04 Y DATE 7
CUS05 Y NUMBER 22
CUVERSION N NUMBER 22
DISPLAYSEQUENCE Y NUMBER 22
MEAINPUT Y VARCHAR2 50
MEASUREUNITID Y VARCHAR2 8
NUMVALUE Y NUMBER 22
ORGID N VARCHAR2 8
PLUSDCUSPECID N NUMBER 22
PLUSDCUSPECID N NUMBER 22
ROWSTAMP N VARCHAR2 40
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-25
PLUSDCUSTATUS Table
PLUSDCUTOOL Table
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CUNAME N VARCHAR2 25
CUVERSION N NUMBER 22
MEAINPUT Y VARCHAR2 50
MEMO Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDCUSTATUSID N NUMBER 22
PLUSDCUSTATUSID N NUMBER 22
ROWSTAMP N VARCHAR2 40
STATUS N VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
ABANDONFACTOR N NUMBER 22
ABSOLUTEFLAG N NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CONTRACTEDFLAG N NUMBER 22
CREWTYPE Y VARCHAR2 8
CUNAME N VARCHAR2 25
CUTOOLKEY Y NUMBER 22
CUVERSION N NUMBER 22
INSTALLFACTOR N NUMBER 22
LABORFILTER01 Y VARCHAR2 1
LABORFILTER02 Y VARCHAR2 1
LABORFILTER03 Y VARCHAR2 1
LABORFILTER04 Y VARCHAR2 4
LABORFILTER05 Y VARCHAR2 1
LABORFILTER06 Y VARCHAR2 1
LABORFILTER07 Y VARCHAR2 1
6-26 IBM Maximo for Utilities: Maximo User’s Guide Addendum
LABORFILTER08 Y VARCHAR2 1
LABORFILTER09 Y VARCHAR2 1
LABORFILTER10 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDCUTOOLID N NUMBER 22
PLUSDCUTOOLID N NUMBER 22
RATE Y NUMBER 22
RATEHASCHANGED N NUMBER 22
REMOVEFACTOR N NUMBER 22
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
TOOLESTMETHOD N VARCHAR2 1
TOOLNUM N VARCHAR2 8
TRANSFERFACTOR N NUMBER 22
WORKFUNCTION Y VARCHAR2 1
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-27
PLUSDCVALHEAD Table
PLUSDCVALLIST Table
COLUMN NULLS MAXTYPE LENGTH
DESCRIPTION Y VARCHAR2 50
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
LISTNAME N VARCHAR2 18
ORGID N VARCHAR2 8
PLUSDCVALHEADID N NUMBER 22
PLUSDCVALHEADID N NUMBER 22
ROWSTAMP N VARCHAR2 40
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CVALLISTKEY N VARCHAR2 20
DEFAULTFLAG N NUMBER 22
DESCRIPTION Y VARCHAR2 50
DISABLEDFLAG N NUMBER 22
HASLD N NUMBER 22
HEADERFLAG N NUMBER 22
KEY01 N VARCHAR2 18
KEY02 Y VARCHAR2 18
KEY03 Y VARCHAR2 18
KEY04 Y VARCHAR2 18
KEY05 Y VARCHAR2 18
LANGCODE Y VARCHAR2 4
LISTNAME N VARCHAR2 18
ORGID N VARCHAR2 8
PLUSDCVALLISTID N NUMBER 22
PLUSDCVALLISTID N NUMBER 22
ROWSTAMP N VARCHAR2 40
VALUE01 Y VARCHAR2 25
6-28 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDESTCONTRCT Table
VALUE02 Y VARCHAR2 25
VALUE03 Y VARCHAR2 25
VALUE04 Y VARCHAR2 25
VALUE05 Y VARCHAR2 25
VALUE06 Y VARCHAR2 25
VALUE07 Y VARCHAR2 25
VALUE08 Y VARCHAR2 25
VALUE09 Y VARCHAR2 25
VALUE10 Y VARCHAR2 25
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CONTRACTNUM N VARCHAR2 8
CONTRACTXREF N VARCHAR2 3
MEAINPUT Y VARCHAR2 50
MEMO Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDESTCONTRCTID N NUMBER 22
PLUSDESTCONTRCTID N NUMBER 22
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
VENDOR N VARCHAR2 12
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-29
PLUSDESTCONTROL Table
PLUSDESTDETAIL Table
COLUMN NULLS MAXTYPE LENGTH
ACCEPTEDVERSION Y NUMBER 22
ASBUILTVERSION Y NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGECHKDATE Y DATE 7
CHANGEDATE N DATE 7
CNSTTASKID Y NUMBER 22
CNSTWONUM Y VARCHAR2 10
DESCRIPTION Y VARCHAR2 254
ESTIMATEACTION Y VARCHAR2 8
HASLD N NUMBER 22
HISTORYFLAG N NUMBER 22
LANGCODE Y VARCHAR2 4
MASTERWONUM Y VARCHAR2 10
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDESTCONTROLID N NUMBER 22
PLUSDESTCONTROLID N NUMBER 22
REQUESTNUM N VARCHAR2 8
REQUESTTYPE Y VARCHAR2 18
ROWSTAMP N VARCHAR2 40
SITEID N VARCHAR2 8
STATUS N VARCHAR2 10
STATUSDATE N DATE 7
SUPPORTTASKID Y NUMBER 22
SUPPORTWONUM Y VARCHAR2 10
COLUMN NULLS MAXTYPE LENGTH
ACCTCODE Y VARCHAR2 6
ACCTOVERRIDE Y VARCHAR2 2
ACGFILTER01 Y VARCHAR2 1
6-30 IBM Maximo for Utilities: Maximo User’s Guide Addendum
ACGFILTER02 Y VARCHAR2 1
ACGFILTER03 Y VARCHAR2 1
ACGFILTER04 Y VARCHAR2 1
ACGFILTER05 Y VARCHAR2 1
ACGFILTER06 Y VARCHAR2 1
ACGFILTER07 Y VARCHAR2 1
ACGFILTER08 Y VARCHAR2 1
ACGFILTER09 Y VARCHAR2 1
ACGFILTER10 Y VARCHAR2 1
APPLYCONTRIBUTION N NUMBER 22
ASSETCODE Y VARCHAR2 8
ASSETQTY Y NUMBER 22
BACKTOSTN Y VARCHAR2 3
BACKTOSTNKEY Y NUMBER 22
CAPITAL N NUMBER 22
CATALOGCODE Y VARCHAR2 30
CHANGEBY Y VARCHAR2 30
CHANGEDATE Y DATE 7
COMMONSTN Y VARCHAR2 3
CONTRACTLINENUM Y NUMBER 22
CONTRACTNUM Y VARCHAR2 8
CONTRACTXREF Y VARCHAR2 3
CPRLOCATION Y VARCHAR2 4
CRAFT Y VARCHAR2 8
CREWTYPE Y VARCHAR2 8
CUNAME Y VARCHAR2 25
CUVERSION Y NUMBER 22
DEFERFLAG Y VARCHAR2 1
DESCRIPTION Y VARCHAR2 100
DIRECTPURCHASEFLAG N NUMBER 22
ERRORFLAG N NUMBER 22
ERRORMESSAGE Y VARCHAR2 254
ESTDETAILKEY N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-31
ESTVERSION N NUMBER 22
FINANCIALWO Y VARCHAR2 10
GLACCOUNT Y VARCHAR2 23
HOURLYRATE Y NUMBER 22
ISTOOLCOST N NUMBER 22
ITEMNUM Y VARCHAR2 30
JOBINSTRUCTIONFLAG N NUMBER 22
LABORFILTER01 Y VARCHAR2 1
LABORFILTER02 Y VARCHAR2 1
LABORFILTER03 Y VARCHAR2 1
LABORFILTER04 Y VARCHAR2 4
LABORFILTER05 Y VARCHAR2 1
LABORFILTER06 Y VARCHAR2 1
LABORFILTER07 Y VARCHAR2 1
LABORFILTER08 Y VARCHAR2 1
LABORFILTER09 Y VARCHAR2 1
LABORFILTER10 Y VARCHAR2 1
LINECOST Y NUMBER 22
LOADINGTYPE Y NUMBER 22
LOCATION Y VARCHAR2 12
MANUFACTURER Y VARCHAR2 12
MASTERWONUM Y VARCHAR2 10
MATERIALFILTER01 Y VARCHAR2 1
MATERIALFILTER02 Y VARCHAR2 4
MATERIALFILTER03 Y VARCHAR2 2
MATERIALFILTER04 Y VARCHAR2 1
MATERIALFILTER05 Y VARCHAR2 1
MATERIALFILTER06 Y VARCHAR2 1
MATERIALFILTER07 Y VARCHAR2 1
MATERIALFILTER08 Y VARCHAR2 1
MATERIALFILTER09 Y VARCHAR2 1
MATERIALFILTER10 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
COLUMN NULLS MAXTYPE LENGTH
6-32 IBM Maximo for Utilities: Maximo User’s Guide Addendum
MODELNUM Y VARCHAR2 8
OFFSITEHOURS Y NUMBER 22
ORGID N VARCHAR2 8
ORIGINALCUNAME Y VARCHAR2 25
ORIGINALCUVERSION Y NUMBER 22
OUTSIDE N NUMBER 22
PARAMETERSET Y NUMBER 22
PARENTCUNAME Y VARCHAR2 25
PARENTCUVERSION Y NUMBER 22
PARENTESTDTLKEY Y NUMBER 22
PLANTACCT Y VARCHAR2 4
PLUSDESTDETAILID N NUMBER 22
PLUSDESTDETAILID N NUMBER 22
PLUSDESTDETAILPL Y NUMBER 22
PLUSDESTDETAILPL Y NUMBER 22
PROCESSCODE Y NUMBER 22
QUANTITY Y NUMBER 22
RECORDTYPE N VARCHAR2 18
REQUESTNUM N VARCHAR2 8
REVISEDTASKID Y NUMBER 22
REVISEDWONUM Y VARCHAR2 10
ROWSTAMP N VARCHAR2 40
SALVAGEQTY Y NUMBER 22
SITEHOURS Y NUMBER 22
SITEID Y VARCHAR2 8
STATION Y VARCHAR2 3
STATIONKEY Y NUMBER 22
STATISTICALCODE Y VARCHAR2 4
STNDETAILKEY Y NUMBER 22
STORELOC Y VARCHAR2 12
SUPPORTFLAG Y VARCHAR2 1
TASKID Y NUMBER 22
TOOLESTMETHOD Y VARCHAR2 1
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-33
PLUSDESTSTATUS Table
TOOLNUM Y VARCHAR2 30
UNITCOST Y NUMBER 22
UOM Y VARCHAR2 8
VENDOR Y VARCHAR2 12
VINTAGEYEAR Y VARCHAR2 4
WONUM Y VARCHAR2 10
WORKFUNCTION N VARCHAR2 1
WORKGROUP Y VARCHAR2 8
WORKTYPE Y VARCHAR2 4
WORKZONE Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
ERRORFLAG N NUMBER 22
ERRORMESSAGE Y VARCHAR2 100
ESTVERSION Y NUMBER 22
MEAINPUT Y VARCHAR2 50
MEMO Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDESTSTATUSID N NUMBER 22
PLUSDESTSTATUSID N NUMBER 22
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
STATUS N VARCHAR2 10
COLUMN NULLS MAXTYPE LENGTH
6-34 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDESTVERSION Table
COLUMN NULLS MAXTYPE LENGTH
ACCTOVERRIDE Y VARCHAR2 2
ACGFILTER01 Y VARCHAR2 1
ACGFILTER02 Y VARCHAR2 1
ACGFILTER03 Y VARCHAR2 1
ACGFILTER04 Y VARCHAR2 1
ACGFILTER05 Y VARCHAR2 1
ACGFILTER06 Y VARCHAR2 1
ACGFILTER07 Y VARCHAR2 1
ACGFILTER08 Y VARCHAR2 1
ACGFILTER09 Y VARCHAR2 1
ACGFILTER10 Y VARCHAR2 1
APPLIEDCONTRIBAMT N NUMBER 22
APPLYCONTRIBUTION Y VARCHAR2 1
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CONTRACTXREF Y VARCHAR2 3
CONTRIBUTIONAMT Y NUMBER 22
CONTRIBUTIONMETHOD Y VARCHAR2 1
CONTRIBUTIONPCT Y NUMBER 22
DEFERFLAG N NUMBER 22
DESCRIPTION Y VARCHAR2 100
ESTIMATETYPE N VARCHAR2 8
ESTIMATOR N VARCHAR2 8
ESTVERSION N NUMBER 22
EXTERNALTOOL N NUMBER 22
FINANCIALWO Y VARCHAR2 10
HASLD N NUMBER 22
LABORFILTER01 Y VARCHAR2 1
LABORFILTER02 Y VARCHAR2 1
LABORFILTER03 Y VARCHAR2 1
LABORFILTER04 Y VARCHAR2 4
LABORFILTER05 Y VARCHAR2 1
Utilities Database Tables and Columns 6-35
LABORFILTER06 Y VARCHAR2 1
LABORFILTER07 Y VARCHAR2 1
LABORFILTER08 Y VARCHAR2 1
LABORFILTER09 Y VARCHAR2 1
LABORFILTER10 Y VARCHAR2 1
LANGCODE Y VARCHAR2 4
LBRCOSTIN N NUMBER 22
LBRCOSTOUT N NUMBER 22
LBRHRSITEIN N NUMBER 22
LBRHRSITEOUT N NUMBER 22
LBRHRSOFFSITEIN N NUMBER 22
LDGCOST Y NUMBER 22
MATERIALFILTER01 Y VARCHAR2 1
MATERIALFILTER02 Y VARCHAR2 4
MATERIALFILTER03 Y VARCHAR2 2
MATERIALFILTER04 Y VARCHAR2 1
MATERIALFILTER05 Y VARCHAR2 1
MATERIALFILTER06 Y VARCHAR2 1
MATERIALFILTER07 Y VARCHAR2 1
MATERIALFILTER08 Y VARCHAR2 1
MATERIALFILTER09 Y VARCHAR2 1
MATERIALFILTER10 Y VARCHAR2 1
MATLCOSTIN N NUMBER 22
MATLCOSTOUT N NUMBER 22
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PLUSDESTVERSIONID N NUMBER 22
PLUSDESTVERSIONID N NUMBER 22
PROCESSCODE N NUMBER 22
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SALVAGEAMT N NUMBER 22
SERVICECOST N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
6-36 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDSTATION Table
SITEID Y VARCHAR2 8
STATUS N VARCHAR2 10
STATUSDATE N DATE 7
STORELOC N VARCHAR2 12
TOOLCOSTIN N NUMBER 22
TOOLCOSTOUT N NUMBER 22
TOTALDEFERREDCOST N NUMBER 22
WORKGROUP N VARCHAR2 8
WORKZONE Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CPRLOCATION Y VARCHAR2 4
DESCRIPTION Y VARCHAR2 100
ESTVERSION N NUMBER 22
HASLD N NUMBER 22
LANGCODE Y VARCHAR2 4
LOCATION Y VARCHAR2 12
MEAINPUT Y VARCHAR2 50
NAMECHGFLAG N NUMBER 22
ORGID N VARCHAR2 8
PLUSDSTATIONID N NUMBER 22
PLUSDSTATIONID N NUMBER 22
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
STATION N VARCHAR2 3
STATIONKEY N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
Utilities Database Tables and Columns 6-37
PLUSDSTNDETAIL Table
COLUMN NULLS MAXTYPE LENGTH
ABANDONCUQTY Y NUMBER 22
ABANDONLABORFIL01 Y VARCHAR2 1
CHANGEBY N VARCHAR2 18
CHANGEDATE N DATE 7
CUNAME N VARCHAR2 25
CUSEQ N NUMBER 22
CUVERSION N NUMBER 22
ESTVERSION N NUMBER 22
EXPANDFLAG N NUMBER 22
INSTALLCUQTY Y NUMBER 22
INSTALLLABORFIL01 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PARAMETERSET N NUMBER 22
PARENTCUNAME Y VARCHAR2 25
PARENTCUVERSION Y NUMBER 22
PLUSDSTNDETAILID N NUMBER 22
PLUSDSTNDETAILID N NUMBER 22
REMOVECUQTY Y NUMBER 22
REMOVELABORFIL01 Y VARCHAR2 1
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
STATION N VARCHAR2 3
STATIONKEY N NUMBER 22
STNDETAILKEY N NUMBER 22
TRANSFERCUQTY Y NUMBER 22
TRANSFERLABORFIL01 Y VARCHAR2 1
6-38 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDSTNPARAM Table
COLUMN NULLS MAXTYPE LENGTH
ACCTOVERRIDE Y VARCHAR2 2
ACGFILTER01 Y VARCHAR2 1
ACGFILTER02 Y VARCHAR2 1
ACGFILTER03 Y VARCHAR2 1
ACGFILTER04 Y VARCHAR2 1
ACGFILTER05 Y VARCHAR2 1
ACGFILTER06 Y VARCHAR2 1
ACGFILTER07 Y VARCHAR2 1
ACGFILTER08 Y VARCHAR2 1
ACGFILTER09 Y VARCHAR2 1
ACGFILTER10 Y VARCHAR2 1
APPLYCONTRIBUTION Y VARCHAR2 1
BACKTOSTN Y VARCHAR2 3
BACKTOSTNKEY Y NUMBER 22
CHANGEBY N VARCHAR2 18
CHANGEDATE Y DATE 7
CONTRACTXREF Y VARCHAR2 3
DEFERFLAG Y VARCHAR2 1
DESCRIPTION Y VARCHAR2 50
ESTVERSION Y NUMBER 22
FINANCIALWO Y VARCHAR2 10
HASLD N NUMBER 22
LABORFILTER01 Y VARCHAR2 1
LABORFILTER02 Y VARCHAR2 1
LABORFILTER03 Y VARCHAR2 1
LABORFILTER04 Y VARCHAR2 4
LABORFILTER05 Y VARCHAR2 1
LABORFILTER06 Y VARCHAR2 1
LABORFILTER07 Y VARCHAR2 1
LABORFILTER08 Y VARCHAR2 1
LABORFILTER09 Y VARCHAR2 1
LABORFILTER10 Y VARCHAR2 1
Utilities Database Tables and Columns 6-39
LANGCODE Y VARCHAR2 4
MATERIALFILTER01 Y VARCHAR2 1
MATERIALFILTER02 Y VARCHAR2 4
MATERIALFILTER03 Y VARCHAR2 2
MATERIALFILTER04 Y VARCHAR2 1
MATERIALFILTER05 Y VARCHAR2 1
MATERIALFILTER06 Y VARCHAR2 1
MATERIALFILTER07 Y VARCHAR2 1
MATERIALFILTER08 Y VARCHAR2 1
MATERIALFILTER09 Y VARCHAR2 1
MATERIALFILTER10 Y VARCHAR2 1
MEAINPUT Y VARCHAR2 50
ORGID N VARCHAR2 8
PARAMETERSET N NUMBER 22
PLUSDSTNPARAMID N NUMBER 22
PLUSDSTNPARAMID N NUMBER 22
REQUESTNUM N VARCHAR2 8
ROWSTAMP N VARCHAR2 40
SITEID Y VARCHAR2 8
SPANDISTANCE Y NUMBER 22
STATION N VARCHAR2 3
STATIONKEY N NUMBER 22
STORELOC Y VARCHAR2 12
SUPPORTFLAG Y VARCHAR2 1
TASKID Y NUMBER 22
VINTAGEYEAR Y VARCHAR2 4
WONUM Y VARCHAR2 10
WORKGROUP Y VARCHAR2 8
WORKZONE Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
6-40 IBM Maximo for Utilities: Maximo User’s Guide Addendum
PLUSDWMASSIGNTMP Table
PLUSDWMMATCHCRW Table
SERVICEITEMS Table
COLUMN NULLS MAXTYPE LENGTH
DESCRIPTION Y VARCHAR2 100
ESTDUR Y FLOAT 22
ORGID N VARCHAR2 8
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWID Y VARCHAR2 8
PLUSDWMASSIGNTMPID N NUMBER 22
PLUSDWMASSIGNTMPID N NUMBER 22
ROWSTAMP N VARCHAR2 40
SCHEDULEDATE Y DATE 7
TASKID Y NUMBER 22
WONUM Y VARCHAR2 10
COLUMN NULLS MAXTYPE LENGTH
PLUSDWMMATCHCRWID N NUMBER 22
PLUSDWMMATCHCRWID N NUMBER 22
ROWSTAMP N VARCHAR2 40
COLUMN NULLS MAXTYPE LENGTH
PLUSDCUESALVAGEPCT Y NUMBER 22
PLUSDCUEUNITCOST Y NUMBER 22
PLUSDCUEUOM Y VARCHAR2 8
PLUSDTOOL N NUMBER 22
Utilities Database Tables and Columns 6-41
TOOLINV Table
TOOLITEM Table
TOOLTRANS Table
WMASSIGNMENT Table
COLUMN NULLS MAXTYPE LENGTH
PLUSDCUESALVAGEPCT Y NUMBER 22
PLUSDCUEUNITCOST Y NUMBER 22
PLUSDCUEUOM Y VARCHAR2 8
PLUSDTOOL N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
PLUSDCUESALVAGEPCT Y NUMBER 22
PLUSDCUEUNITCOST Y NUMBER 22
PLUSDCUEUOM Y VARCHAR2 8
PLUSDTOOL N NUMBER 22
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID N VARCHAR2 8
PLUSDTOOLSQ N VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDAWORKGROUP Y VARCHAR2 8
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDWORKGROUP Y VARCHAR2 8
6-42 IBM Maximo for Utilities: Maximo User’s Guide Addendum
WOACTIVITY Table
WORKORDER Table
WPITEM Table
WPLABOR Table
WPMATERIAL Table
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDESTCREWTOOL Y NUMBER 22
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDESTCREWTOOL Y NUMBER 22
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
PLUSDWORKGROUP Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
Utilities Database Tables and Columns 6-43
WPSERVICE Table
WPTOOL Table
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
COLUMN NULLS MAXTYPE LENGTH
PLUSDCREWID Y VARCHAR2 8
PLUSDCREWTYPE Y VARCHAR2 8
6-44 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:
IBM World Trade Asia Corporation Licensing 2-31 Roppongi 3-chome, Minato-ku Tokyo 106-0032, Japan
The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those
© Copyright IBM Corp. 2006 Notices-1
Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:
IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A.
Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.
The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.
Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.
All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only.
This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.
If you are viewing this information softcopy, the photographs and color illustrations may not appear.
Trademarks
AIX, IBM, IBM Corporation, the IBM logo, Tivoli, and WebSphere are registered trademarks of the International Business Machines Corporation in the United States, other countries, or both.
Intel, the Intel logo, and Pentium are registered trademarks of the Intel Corporation in the United States, other countries, or both.
Microsoft, Windows, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States, other countries, or both.
Notices-2 IBM Maximo for Utilities: Maximo User’s Guide Addendum
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.
Sun, Sun Microsystems, the Sun logo, and Solaris are trademarks of Sun Microsystems, Inc.
Linux is a trademark of Linus Torvalds in the United States, other countries, or both.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
Notices-3
Notices-4 IBM Maximo for Utilities: Maximo User’s Guide Addendum