Matsuura Kikai Seisakusho Co., Ltd.

Company OverviewCorporate PhilosophyCompany HistoryThe Main EquipmentBusinessPerformance & Products

Company Overview

NameAddressTelFaxFoundationEstablishmentThe CapitalEmployees

CEOMain Customer

Matsuura Kikai Seisakusho Co., Ltd.Headquarters 　 2-5-62 Minami-Tamiya 088-632-1056 Tokushima City Japan088-632-576419611981\10,000,00030

YOSHIHIKO MATSUURA JTEKT Corporation/NHK(Nihon Housou Kyoukai)

Matsuura Kikai Seisakusho Co., Ltd. works on conforming of the quality control system for International Organization for Standardization (ISO). In September, 2000 the International Standard of the quality management system (ISO9001: 2000) is acquired to our company. The system has been operated as the main quality control system since then.

Corporate Philosophy

All the machines are supporting our daily life. They are the tools that are needed for everyone to spend vividly daily life. All the staffs are doing their business with the universal idea in their mind every day. 　 Our company works on the metal mold design & process, equipment design & process, FA (Factory Automation) system development, and also develops the broadcasting support system. Today, the technical improvement is very fast developed; every member of us is learning the new technology every day in order to correspond with the developing ages. For customer of the ordering and using of our products, also the families of our staffs always feel richness of the life. That is the wish of our company.

Company History

It was established as personal business 　 that works in metal fitting to tools, precise processing by Mr. Shinyichi. Matsuurasince 1961 at North Tamiya Tokushima city. The name of the company was Touhou Kikai Seisakusho Co. In July 1981, the company was moved to 2-5-62 Minami-Tamiya Tokushima City 770-0004 。 As a corporate business the name was changed to Matsuura Kikai Seisakusho Co. And the CEO is Mr. Yoshihiko Matsuura. In the May 1991, one more factory （ OujingFactory ） was established at 63-5 Oujing-Cyo Tokushima City.And the design and the assembly department are established. In October, 1992, It changed the name to Matsuura Kikai SeisakushoCo. Ltd. In September, 1997, The DNC communication software which is made by our company Is certificated by creation law. In September, 1999, the moving relay system is certificated by creation low. In September, 2000, "ISO9001" Certification is certificated for our company. In October 2000, the Tokushima new business grand prize; CommunicationTechnology Prize is received by our company. In June, 2003, Industrial Prize was receivedby our company from Tokushima Newspaper. In May, 2006, "Thesis prize" was received fromJapan Design Society.

Main EquipmentName Qt’y MakerNC turning machine 3 Okuma MC　　　　　 3 ToyodaCylinder grinding M/C 1 ToyodaWire cutting machine 1 Mitsubishi Cylinder grind machine 2 Toyoda Sucyoda Inner grinding machine 3 Ymada.Forming grind machine 1 OkamotoFlat surface grinding 3 Okamoto Drilling machine 1 Yoshida Milling cutter 1 YmazakiCircularity Measuring 1 Tokoyo Seimitsu

instrument Shape measuring instrument 13D /CAD/ Instrument 1 Mitsutoyo Co., Ltd.3 D measuring machine1 Mitsutoyo Co., Ltd.Jig grinding machine 1 Waida Co., Ltd.

Business content　

In the Matsuura Kikai Seisakusho Co., Ltd., from the technology section to each project, design, and manufacture section, the accumulation of the technology practice and experience are done repeatedly every day. We hope that all the products are made by our company for the customer with the high quality and safety performance. We consider that the equipment is the same as food. For the customer's various requests, we do the best design with flexible and wide view consideration.　

Mechanical design, Manufacture, Part processing

Business　content

In order to pursue the advanced technology is easy to be used, our company executes all the flow procedures of machine manufacture that is dealt with to processing of parts, the design of the main body of a machine and construction of a producing system. 　 In the part processing technology which influences the performance of the machine, the precision and correctness are always noticed. Since the machine assembly is related with the productivity we are continuing to improve the tact time shorter in 0.1 second unit.　 Moreover, the laborsaving machines have been offered not only in Japan but alsoto overseas. Some of them are exported to North America, China, France, Czechoslovakia, Thailand, and Malaysia etc..

Mechanical design, Manufacture, Part processing

Performance & Products

News car one-touch transmitter control system

Delivery place :NHK Tokushima, Kitakyusyu, Hiroshima, Okayama, Matsue, Yonago, Shimonoseki, Saga, Fukuyama, Tottori, Maebashi

　 Altitude data is added to a Japanese map and a transmission point is discovered quickly. The antenna angle can be rectified smoothly with an inclination sensor according to the calculation of the theoretical electric field intensity and the received electric field intensity. The optimal transmission point of the car can be registered with the GPS, speed sensor, and a gyroscope.

Performance & Products

Transmission-via-satellite navigator

Delivery place: NHK Technological bureau

The azimuth and elevation angle of communications satellite can be displayed on the monitor in real time from the present relay vehicle. The most optimal position and direction of the relay vehicle can be understood. Moreover, the place of the relay vehicle can be shown on the displaying map with the prospect map function according to the skyscraper or geographical feature data.

Performance & Products

Urgent image sending-out equipment

Delivery place: NHK Oita

This is sending-out equipment that can transmit the static picture and movie that are taken by mobile phone with HDSDI. The exclusive software is requested for the past format memory since the difference form of portable career. But this sending-equipment is different from the past portable career, the picture of the data list in memory can be red and shown on the monitor directly by easy operation. The Hi-Vision can be attained with HDSDI output.

Performance & ProductsInputOutput-4ch A/D board

The DC motor system is controlled with the microcomputer and A/D board that is developed by our company. The processing speed and control are improved by compact size and precision measurement sensor.

The azimuth of the antenna platform is controlled independently and automatically without the outside PC.

Performance & ProductsHelicopter auto- trailing antenna platform

FPU antenna direction automatic adjustment system

Delivery place: Private sector television

Performance & Products

2. Heavens top camera control support system

3. Relay navigation system

In addition, many communication facility control software have beendeveloped.

Delivery place: NHK Kitakyusyu, Fukuoka, Oita, Maebashi

The control system is used not only by sensor and PC control but also by A/D board in order to make it easy to use and become more compact.

1. Moveable satellite capture support system