MATLAB and Simulink Total Academic Headcount License ... · PDF filemodification, reproduction, release, ... Install Product Files” on page 1-10) To create an account at The MathWorks

MATLAB® and Simulink®

Total Academic Headcount LicenseAdministration Guide

How to Contact The MathWorks

www.mathworks.com Webcomp.soft-sys.matlab Newsgroupwww.mathworks.com/contact_TS.html Technical Support

[email protected] Product enhancement [email protected] Bug [email protected] Documentation error [email protected] Order status, license renewals, [email protected] Sales, pricing, and general information

508-647-7000 (Phone)

508-647-7001 (Fax)

The MathWorks, Inc.3 Apple Hill DriveNatick, MA 01760-2098For contact information about worldwide offices, see the MathWorks Web site.

Total Academic Headcount License Administration Guide

© COPYRIGHT 2008 by The MathWorks, Inc.The software described in this document is furnished under a license agreement. The software may be usedor copied only under the terms of the license agreement. No part of this manual may be photocopied orreproduced in any form without prior written consent from The MathWorks, Inc.

FEDERAL ACQUISITION: This provision applies to all acquisitions of the Program and Documentationby, for, or through the federal government of the United States. By accepting delivery of the Program orDocumentation, the government hereby agrees that this software or documentation qualifies as commercialcomputer software or commercial computer software documentation as such terms are used or definedin FAR 12.212, DFARS Part 227.72, and DFARS 252.227-7014. Accordingly, the terms and conditions ofthis Agreement and only those rights specified in this Agreement, shall pertain to and govern the use,modification, reproduction, release, performance, display, and disclosure of the Program and Documentationby the federal government (or other entity acquiring for or through the federal government) and shallsupersede any conflicting contractual terms or conditions. If this License fails to meet the government’sneeds or is inconsistent in any respect with federal procurement law, the government agrees to return theProgram and Documentation, unused, to The MathWorks, Inc.

Trademarks

MATLAB and Simulink are registered trademarks of The MathWorks, Inc. Seewww.mathworks.com/trademarks for a list of additional trademarks. Other product or brandnames may be trademarks or registered trademarks of their respective holders.

Patents

The MathWorks products are protected by one or more U.S. patents. Please seewww.mathworks.com/patents for more information.

Revision HistoryJune 2008 First publication Online only

http://www.mathworks.com/trademarks

http://www.mathworks.com/patents

Contents

Administering a Total Academic HeadcountLicense

1Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

TAH License Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Deploying a TAH Campus License: DesignatedComputer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Summary of Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Steps Performed by Administrator . . . . . . . . . . . . . . . . . . . 1-5Steps Performed by End-User . . . . . . . . . . . . . . . . . . . . . . . 1-8

Deploying a TAH Campus License: Network ConcurrentUser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20Stage 1: Activating the License Server . . . . . . . . . . . . . . . . 1-20Stage 2: Installing the License Manager on the License

Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23Stage 3: Setting Up Client Computers . . . . . . . . . . . . . . . . 1-27

Deploying a TAH Student License . . . . . . . . . . . . . . . . . . . 1-29Summary of Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29Steps Performed by Administrator . . . . . . . . . . . . . . . . . . . 1-31Steps Performed by Student . . . . . . . . . . . . . . . . . . . . . . . . . 1-34

Installing Child Licenses in a TAH Campus License . . . 1-44

Index

iii

iv Contents

1

Administering a TotalAcademic HeadcountLicense

• “Overview” on page 1-2

• “Deploying a TAH Campus License: Designated Computer” on page 1-3

• “Deploying a TAH Campus License: Network Concurrent User” on page1-20

• “Deploying a TAH Student License” on page 1-29

• “Installing Child Licenses in a TAH Campus License” on page 1-44

1 Administering a Total Academic Headcount License

OverviewThis document describes how to install and activate a Total AcademicHeadcount (TAH) license on a university campus. The TAH license is availablefor colleges and universities who wish to provide access to MathWorks™products to the faculty, staff, and students on campus.

The intended audience for this document is the person responsible foradministering the license—the administrator contact on the license. Theadministrator can also share this responsibility with others by identifyingadditional contacts on the license, called Asset Managers. Contact theMathWorks if you want to set up Asset Managers on your TAH license.

TAH License OptionsThe TAH license has these options:

• TAH Campus — Allows campus-wide access on university-ownedcomputers to all faculty, staff and students. TAH Campus licenses supporttwo activation types:

- TAH Designated Computer—see “Deploying a TAH Campus License:Designated Computer” on page 1-3.

- TAH Network Concurrent User—see “Deploying a TAH Campus License:Network Concurrent User” on page 1-20.

Faculty and staff are also entitled to install MathWorks software on theirpersonally owned computers and purchase additional products for theirown use (see “Installing Child Licenses in a TAH Campus License” onpage 1-44).

• TAH Student — Allows student access on their personally owned or leasedcomputers. This option can be useful when a university wants to providestudents with MathWorks products. TAH Student licenses support onlyone activation type: Standalone Named User—see “Deploying a TAHStudent License” on page 1-29.

The two TAH license options are independent of one another. One universitycan have both types. Each license maintains its own products, dependencies,and right to use.

1-2

Deploying a TAH Campus License: Designated Computer


In this section...

“Summary of Steps” on page 1-3

“Steps Performed by Administrator” on page 1-5

“Steps Performed by End-User” on page 1-8

Summary of StepsTo deploy a TAH Campus license using the TAH-Designated Computeractivation type at your institution, you must install the software on computersacross your campus and then activate each installation. There are severalways to perform these installations and activations, depending on how muchcontrol you want to retain over product usage at your site.

For example, you can perform all the installations and activations yourself.While this provides tight control over usage, it can be impractical at largesites.

The recommended approach, which balances the need to control usage withease of administration, is to allow end-users to install and activate thesoftware across the campus. In this scenario, you give each user the ActivationKey for the TAH Campus license. With this key, users can associate theirMathWorks™ Accounts with the TAH Campus license, install the software,and activate their installations. (To activate, users must have MathWorksAccounts.)

The following lists the steps in this process, highlighting the steps that mustbe performed by the administrator and those that can be performed by anend-user. See the sections that follow for detailed instructions on each step.

1-3


Steps that must be performed by the administrator:

“Step 1: Retrieve the Activation Key” on page 1-5

“Step 2: Set Permissions on the License” on page 1-7

“Step 3: Distribute Activation Key to End-users” on page 1-7

“Step 4: Provide Access to Product Files” on page 1-7

Steps that can be performed by the end-user :

“Step 1: Create a MathWorks Account” on page 1-8

“Step 2: Associate Your Account with the License” on page 1-9

“Step 3: Install Product Files” on page 1-10

“Step 4: Activate the Software” on page 1-17

1-4


Steps Performed by Administrator

Step 1: Retrieve the Activation Key

Administrator

- Retrieve the Activation Key.

- Distribute the Activation Key to end-users.

- Set permissions on the license.

- Provide access to product files.

1 Go to the License Center at the MathWorks Web site. Log in to youraccount and, on the My Account page, click Manage Licenses to get tothe License Center.

2 Select the TAH Campus license from the list of licenses displayed on the MyLicenses page. The License Center expands the entry for the TAH Campuslicense, displaying the two activation types, TAH Designated Computer andTAH Network Concurrent User. Note that the two activation types for theTAH Campus license each have separate Activation Keys.

3 Select the TAH Designated Computer entry. The License Center displaysinformation about the license in the License Details pane below the listof licenses.

Select the TAH Designated Computer activation type for this license.

4 Click the Activation and Installation tab and, on the Activation andInstallation page, click Advanced Options.

1-5


Click Advanced Options.

5 In the Advanced Options dialog box, copy the Activation Key and clickDone.

Copy this keyand save it.

1-6


Step 2: Set Permissions on the License

Administrator





The MathWorks recommends that you turn off Permission to Activate on theTAH Campus license because this limits who can get the Activation Key forthe license. In addition, by turning off this permission, you require end-usersto specify the Activation Key during the activation process.

If you want end-users to download the products on the TAH Campus license,turn on Permission to Download on the license, as well.

If you want to set either of these permissions on the license, contact CustomerService (http://www.mathworks.com/support/contact_us/index.html).

Step 3: Distribute Activation Key to End-users

Administrator





To install and activate, end-users need the Activation Key. After you retrieveit from the License Center, distribute it to faculty, staff, and students thatare part of the TAH Campus license.

Step 4: Provide Access to Product Files

Administrator





To install and activate, end-users need access to product files. There areseveral ways to provide end-users with access:

1-7

http://www.mathworks.com/support/contact_us/index.html


• Place product files on a central server available to all users

• Allow users to download the files from The MathWorks Web site

• Use a deployment tool to distribute the product files to end-user computers

• Share the DVD with end-users.

Steps Performed by End-User

Step 1: Create a MathWorks Account

End-user

- Create a MathWorks Account.

- Install product files.

- Associate account with TAH license.

- Activate installation.

To activate the software, you must have a MathWorks Account. You can use anexisting account, but the e-mail address used for the account must include theuniversity’s e-mail domain and the account must be set up for academic use.

You can create an account at the MathWorks Web site or during theinstallation process (see “Step 3: Install Product Files” on page 1-10)

To create an account at The MathWorks Web site, click the Create Accountlink. When you create the account, make sure to set it up for academic use, asshown in the following figure.

Select this option.

1-8


Step 2: Associate Your Account with the License

End-user





To activate the software, you must associate your MathWorks Account withthe TAH Campus license, using the Activation Key.

You can associate with a license using the License Center at the MathWorksWeb site or during installation using the MathWorks installer (see “Step 3:Install Product Files” on page 1-10).

To associate with a license at the License Center, follow these instructions:

1 Go to the MathWorks Web site and log in to your MathWorks Account.

2 On the My Account page, click Manage Licenses.

3 On the My Licenses page, click .

1-9


4 In the Associate dialog box, enter the Activation Key of the TAH Campuslicense.

Click Continue.

Enter Activation Key.

Step 3: Install Product Files

End-user





1 Get the Activation Key for the TAH Campus license and any instructionsyour administrator has prepared.

2 Get access to the product files. For example, the administrator at your sitemight give you the location on a server on your internal network whereyou can get the files.

1-10


If your administrator wants you to download product files from theMathWorks, you must go to the License Center at the MathWorks Website and log in to your MathWorks Account. (If you need to create anaccount, see “Step 1: Create a MathWorks Account” on page 1-8.) On theMy Account page, click Manage Licenses to get to the License Center. Todownload, you must associate your account with the TAH Campus license(see “Step 2: Associate Your Account with the License” on page 1-9). On theMy Licenses page, click Download Product Updates.

3 Start the MathWorks installer specific to your platform.

• Windows: Double-click the setup.exe file. If you have access to theproduct DVD, the installer starts automatically when you insert theDVD into the DVD drive connected to your computer.

• Macintosh: Double-click the InstallForMacOSX file.

• Linux/Unix: Run the install.sh script.

Note The following details the installation steps on a Windows platform,but the process is similar on Macintosh, Linux, and UNIX platforms.

1-11


4 Choose to install automatically using the Internet in the Installer Welcomedialog box.

5 Review the software license agreement and click Next.

1-12


6 Log in to your MathWorks Account, specifying your university e-mailaddress and password, and click Next. If you need to create an account,select the I need to create a MathWorks Account option and click Next.

Enter your university e-mail address and password.

Select this option ifyou need to createan account.

Click Next.

1-13


If you are creating a new account, enter your university e-mail address,first name, and last name in the Account Creation dialog box. When youcreate an account you must also specify the Activation Key of the TAHCampus license. Click Next.

Click Next.

Enter your university e-mail address, first name, and last name.


7 Specify the license you want to install in the License Selection dialog box.

• If you have already associated your account with the TAH Campuslicense at the License Center, select the license from the list of licenses.

• If you have the Activation Key for the TAH Campus license, select theEnter an Activation Key for a license not listed option and enterthe Activation Key.

• If you created an account in the previous step, you already specified theActivation Key, so the installer skips this step.

1-14


After specifying the TAH Campus license, click Next.

If you are already associated with the TAH license, select it in the list.

If you are not associated with the TAH license, select this option and enter theActivation Key.

8 Select the Typical option in the Installation Type dialog box. This ensuresthat all products on the TAH Campus license get installed.

9 Specify the folder in which you want to install the software in theInstallation Folder dialog box and click Next.

1-15


10 Confirm your choices and click Install.

Confirm settings and click Install.

11 When the MathWorks installer finishes, it displays the InstallationComplete dialog box. In this dialog box, you can choose to activate thesoftware you just installed. You cannot use the software until you activateit. The MathWorks recommends activating immediately after installation.If you want to activate later in a separate process, clear the option and clickNext. To proceed with activation, leave the option selected and click Next.

1-16


Step 4: Activate the Software

End-user





If you chose to let the installer launch the activation application, theapplication can skip several of the steps outlined below because the installerpasses the information to the activation application.

1 In the Activation Welcome dialog box, click Next.

Note If you started the activation application, rather than letting theinstaller start it, you must choose whether to activate automatically ormanually. The MathWorks recommends activating automatically.

Click Next.

1-17


2 Log in to your MathWorks Account and click Next.

Note If you let the installer start the activation application and you werelogged in to your account, the activation application skips this step.

3 Select the license you want to activate and click Next.


4 Specify the Activation Key in the Activation Key dialog box and click Next.

Enter Activation Key for TAH license.

Click Next.

1-18


5 Confirm your activation information in the Confirmation dialog box andclick Activate to activate the software.

6 Complete the activation process by clicking Finish in the ActivationComplete dialog box.

1-19


Deploying a TAH Campus License: Network ConcurrentUser

Administrator

- Activate the license server at License Center.

- Set up client computers.

- Install the license manager on the license server.

Only the Administrator (or Asset Manager) contact on the TAH Campuslicense can perform the installation and activation of software on a licenseserver with the TAH Network Concurrent User activation type. Clientcomputers in network configurations do not need to be activated.

Note A single TAH Campus license can have multiple license servers.

Installing and activating TAH Campus license using the a TAH NetworkConcurrent User activation type is a three-stage process:

• Stage 1: Go to the License Center at the MathWorks Web site and activatethe license for a particular license server. You must have the Host ID ofthe computer you want to be your license server.

• Stage 2: Install the license manager and other products on the licenseserver.

• Stage 3: Set up client computers. This can involve installing softwareon these computers or just setting up a shortcut that runs the softwareon a server. Client computers in network installations do not have to beactivated.

Stage 1: Activating the License ServerThis section describes how to activate the license server.


1-20

Deploying a TAH Campus License: Network Concurrent User

2 Select the TAH Campus license from the list of licenses displayed on the MyLicenses page. The License Center expands the entry for the TAH Campuslicense, displaying the two activation types, TAH Designated Computer andTAH Network Concurrent User. Note that the two activation types for theTAH Campus license each have separate Activation Keys.

3 Select the TAH Network Concurrent User entry. The License Centerdisplays information about the license in the License Details pane belowthe list of licenses.

Select the TAH Network Concurrent User activation type for this license.



5 Click Activate on the Activation and Installation page.

In the Activate dialog box, provide the Host ID of the computer on whichyou intend to run the license manager, along with the operating systemtype. You can optionally assign a descriptive label to the activation as well.

1-21


Labels can help identify concurrent activations, since you can have multiplelicense servers on a single TAH Campus license. Enter the informationand click Continue.

6 Retrieve the File Installation Key and License File. In the License Filedialog box, you can download the License File and File Installation Key oryou can choose to have The MathWorks e-mail them to you.

1-22


Stage 2: Installing the License Manager on theLicense ServerThis section describes how to install the license manager and other softwareon the license server.

1 Start the MathWorks installer specific to your platform on the licenseserver.

• Windows: Double-click the setup.exe file. If you have access to theproduct DVD, the installer starts automatically when you insert theDVD into the DVD drive connected to your computer.




1-23


2 Choose the Install manually without using the Internet option in theInstaller Welcome dialog box and click Next. You choose the off-networkoption because you already activated the license for the license server andhave the activated License File.


1-24


4 Specify the File Installation Key in the File Installation Key dialog boxand click Next.

��

��

��

5 Choose a Custom installation in the Installation Type dialog box and clickNext. You must perform a Custom installation so that you can select thelicense manager for installation. By default, the license manager is notpreselected for installation.

6 Specify the folder into which you want to install the software and clickNext.

1-25


7 Select the products you want to install and click Next. For a license serverinstallation, make sure to select the license manager for installation.

��

��

1-26


8 Specify the location of the License File and click Next.

��

��!��

9 Specify whether to configure the license manager as a service and clickNext.

10 Specify installation options and click Next.

11 Confirm your choices and click Next.

12 Click Finish in the Installation Complete dialog box.

Stage 3: Setting Up Client ComputersThe tasks you perform to set-up client computers in a TAH Campus licensewith the TAH Network Concurrent User activation type depends on how youhave designed the network configuration.

If you want end-users to run the software locally on their own computers, youmust install the software on each computer, or let the end-users perform the

1-27


installations themselves. Client installations do not need to be activated.End-users need the File Installation Key to install the software and needthe location of the License File processed during installation on the licenseserver. (This is a License File that contains SERVER and DAEMON lines.) Forinstructions, see the installation guide for your platform.

If you want end-users to run the software on the server over the network, youdo not need to perform an installation. You can just give end-users a desktopshortcut to the network location of the software.

1-28

Deploying a TAH Student License


In this section...

“Summary of Steps” on page 1-29

“Steps Performed by Administrator” on page 1-31

“Steps Performed by Student” on page 1-34

Summary of StepsTo deploy a TAH Student license at your institution, students must install thesoftware on their computers and then activate their installations.

The easiest way to deploy a TAH Student license at your site is to give eachstudent the Activation Key for the license and let them do the installation andactivation themselves. With this key, they can associate their MathWorks™Accounts with the TAH Student license, install the software, and activatetheir installations. (To activate, students must have MathWorks Accounts.)

The only activation type available for a TAH Student license is the StandaloneNamed User activation type. In this activation type, the software gets lockedto a particular computer and a particular user. During activation, the studentsmust specify their operating system user names, also known as login names.

The following provides a high-level summary of the steps involved in lettingstudents install and activate the software themselves. See the sections thatfollow for detailed instructions on each step.

Steps performed by the administrator :

“Step 1: Retrieve the Activation Key” on page 1-31

“Step 2: Set Permissions on the License” on page 1-32

“Step 3: Distribute Activation Key to End-users” on page 1-33

“Step 4: Provide Access to Product Files” on page 1-33

1-29


Steps performed by the student :

“Step 1: Create a MathWorks Account” on page 1-34

“Step 2: Associate Your Account with the License” on page 1-34

“Step 3: Install Product Files” on page 1-36

“Step 4: Activate the Software” on page 1-41

1-30


Steps Performed by Administrator

Step 1: Retrieve the Activation Key

Administrator






2 Select the TAH Student license from the list of licenses displayed on the MyLicenses page. The License Center displays information about the licensein the License Details pane below the list of licenses.

Select the TAH Student license.



1-31


4 In the Advanced Options dialog box, copy the Activation Key and clickDone.

Copy this keyand save it.

Step 2: Set Permissions on the License

Administrator





The MathWorks recommends that you turn off Permission to Activate on theTAH Student license because this limits who can get the Activation Key forthe license. In addition, by turning off this permission, you require studentsto specify the Activation Key during the activation process.

If you want students to download the products on the TAH Student license,turn on Permission to Download on the license.

1-32


If you want to set either of these permissions on the license, contact CustomerService (http://www.mathworks.com/support/contact_us/index.html).

Step 3: Distribute Activation Key to End-users

Administrator





To install and activate, students need the Activation Key. After you retrieve itfrom the License Center, distribute it to students that are part of the TAHStudent license.

Step 4: Provide Access to Product Files

Administrator





To install and activate, students need access to product files. There areseveral ways to provide students with access:

• Place product files on a central server available to all students.

• Allow students to download the files from The MathWorks Web site.

• Use a deployment tool to distribute the product files to student computers.

• Share the DVD with students.

1-33

http://www.mathworks.com/support/contact_us/index.html


Steps Performed by Student

Step 1: Create a MathWorks Account

Student





To activate the software, you must have a MathWorks Account. You can use anexisting account, but the e-mail address used for the account must include theuniversity’s e-mail domain and the account must be set up for academic use.

You can create an account at the MathWorks Web site or during theinstallation process (see “Step 3: Install Product Files” on page 1-36)

To create an account at The MathWorks Web site, click the Create Accountlink. When you create the account, make sure to set it up for academic use, asshown in the following figure.

Select this option.

Step 2: Associate Your Account with the License

Student





To activate the software, you must associate your MathWorks Account withthe TAH Student license using the Activation Key.

1-34


You can associate with a license using the License Center at the MathWorksWeb site or during installation using the MathWorks installer (see “Step 3:Install Product Files” on page 1-36).

To associate with a license at the License Center, follow these instructions:

1 Go to the MathWorks Web site and log in to your MathWorks Account.

2 On the My Account page, click Manage Licenses.

3 On the My Licenses page, click .

4 In the Associate dialog box, enter the Activation Key of the TAH Campuslicense.

Click Continue.


1-35


Step 3: Install Product Files

Student





1 Get the Activation Key for the TAH Student license and any instructionsyour administrator has prepared.

2 Get access to the product files. For example, the administrator at your sitemight give you the location on a server on your internal network whereyou can get the files.

If your administrator wants you to download product files from theMathWorks, you must go to the License Center at the MathWorks Web siteand log in to your MathWorks Account. (If you need to create an account,see “Step 1: Create a MathWorks Account” on page 1-34.) On the MyAccount page, click Manage Licenses to get to the License Center. Todownload, you must associate your account with the TAH Student license(see “Step 2: Associate Your Account with the License” on page 1-34). Onthe My Licenses page, click Download Product Updates.

3 Start the MathWorks installer specific to your platform.

• Windows: Double-click thesetup.exe file. If you have access to theproduct DVD, the installer starts automatically when you insert theDVD into the DVD drive connected to your computer.




1-36


4 Choose to install automatically using the Internet in the Installer Welcomedialog box.


1-37


6 Log in to your MathWorks Account, specifying your e-mail address andpassword, and click Next. If you need to create an account, select the Ineed to create a MathWorks Account option and click Next.

Enter your university e-mail address and password.

Select this option ifyou need to createan account.

Click Next.

1-38


If you are creating a new account, enter your e-mail address, first name,and last name in the Account Creation dialog box. When you create anaccount you must associate it with a license. Specify the Activation Key toassociate with the TAH Student license and click Next.

Click Next.

Enter your university e-mail address, first name, and last name.


7 Specify the license you want to install in the License Selection dialog box.

• If you have the Activation Key for the TAH Student license, select theEnter an Activation Key for a license not listed option and enterthe Activation Key.

• If you have already associated your account with the TAH Studentlicense at the License Center, select the license from the list of licenses.

• If you created an account in the previous step, you already specified theActivation Key, so the installer skips this step.

1-39


After specifying the license, click Next.

Select your TAH Student license.

Click Next. Select this option andenter Activation Key.

8 Select the Typical option in the Installation Type dialog box. This ensuresthat all products on the TAH Student license get installed.

9 Specify the folder in which you want to install the software and click Next.

10 Confirm your choices and click Next.

11 When the MathWorks installer finishes, it displays the InstallationComplete dialog box. In this dialog box, you can choose to activate thesoftware you just installed. You cannot use the software you installed untilyou activate it. The MathWorks recommends activating immediately afterinstallation. If you want to activate later in a separate process, clear theoption and click Next. To proceed with activation, leave the option selectedand click Next.

1-40


Step 4: Activate the Software

Student





1 In the Activation Welcome dialog box, click Next.

Note If you started the activation application, rather than letting theinstaller start it, you must choose whether to activate automatically ormanually. The MathWorks recommends activating automatically.

Click Next.

2 Log in to your MathWorks Account and click Next.

1-41



3 Select the license you want to activate and click Next.


4 Specify the Activation Key in the Activation Key dialog box and click Next.

��

��

5 Specify the operating system user name of the person who will use thesoftware. The operating system user name is the ID under which you gainaccess to your computer. It is also known as computer login name. The

1-42


Standalone Named User activation type locks the software to the username and to the computer host ID. To use the MathWorks software, youmust be logged into the computer as the user name you specify.

Enter your operating system user name.

Click Next.

6 Confirm your activation information in the Confirmation dialog box andclick Activate to activate the software.

7 Complete the activation process by clicking Finish in the ActivationComplete dialog box.

1-43


Installing Child Licenses in a TAH Campus LicenseTo add a product to a TAH license that you only want to be available to aselect group on campus, you must purchase a child license. A child licenseis affiliated with the TAH Campus license but it is a separate license with aseparate license number. To have a Child license, you must be a member ofthe faculty or staff of the institution and must be part of the TAH license.

To install and activate a child license, you must first install and activate theTAH Campus license. Follow this procedure:

1 Install the TAH Campus license on your computer and activate theinstallation, following the standard procedure, described in Chapter 1,“Administering a Total Academic Headcount License”.

2 Install the additional products, as a separate installation, and activatethe software. Follow this procedure:

a Download the product files and run the MathWorks installer.

b During installation, log in to your MathWorks Account, select the childlicense, and select the products you want to install.

c When specifying the installation folder, specify the name of your existingTAH Campus installation folder.

d Activate the child license.

1-44

Index

IndexAactivate permission

turning off on TAH Campus licenses 1-7turning off on TAH Student licenses 1-32

activating TAH Campus licensessteps performed by end-users 1-17

activating TAH Student licensessteps performed by students 1-41

Activation Keyproviding to end-users 1-7providing to students 1-33retrieving at the License Center 1-5

TAH Student license 1-31Activation types

TAH licenses 1-2adding products to TAH licenses 1-44associating a MathWorks Account with the TAH

Campus license 1-9associating a MathWorks Account with the TAH

Student license 1-34

Cchild licenses

with TAH Campus licenses 1-44

Ddeployment

TAH Campus licenses with DesignatedComputer activation type 1-3

TAH Campus licenses with TAH NetworkConcurrent User activation type 1-20

download permissionsetting on TAH Campus licenses 1-7setting on TAH Student licenses 1-32

Iinstalling TAH Campus licenses

steps performed by end-users 1-10TAH Designated Computer activation

type 1-3TAH Network Concurrent User activation

type 1-20installing TAH Student licenses

steps performed by end-users 1-36

LLicense Center

retrieving Activation Key 1-5TAH Student license 1-31

MMathWorks Account

associating with the TAH Campus license 1-9associating with the TAH Student

license 1-34creating 1-8

TAH Student licenses 1-34

Ppermissions

setting on TAH Campus licenses 1-7setting on TAH Student licenses 1-32

product filesproviding to end-users 1-7providing to students 1-33

TTAH Campus licenses

activation types 1-2adding products to 1-44deploying using Designated Computer

activation type 1-3deploying using TAH Network Concurrent

User activation type 1-20

Index-1

Index

overview 1-2TAH Designated Computer activation type

with TAH Campus licenses 1-3TAH licenses

activation types 1-2options 1-2overview 1-2

TAH Network Concurrent User activation type

with TAH Campus licenses 1-20TAH Student licenses

activation types 1-2installing 1-36overview 1-2

Total Academic Headcount (TAH) licensessee TAH licenses 1-2

Index-2

Documents

MATLAB and Simulink Total Academic Headcount License ... · PDF filemodification, reproduction, release, ... Install Product Files” on page 1-10) To create an account at The MathWorks