8 – the third and fourth digits represent the maximum permitted carbon content in units of 0.01% (e.g., CF8 has a maximum of 0.08% carbon)www.castingquality.comM – it means the Molybdenum contained, if no M such as CF8 just means no Molybdenum contained.

As to the designation -www.castingquality.com

C (first letter) - means the service it is intended to be used in this case – corrosion resistant service , but Casting Quality think sometimes it means of CASTING usage because you will find F316 in ASTM A 350 ( F = FORGing)www.castingquality.com

F(second letter) -The second letter indicates the approximate location of the alloy on the iron-chromium-nickel (FeCrNi) ternary diagram. For users familiar with the diagram, the second letter does provide an indication of the nominal iron, nickel, and chromium content, but most people would have to obtain alloying information from a material specification. www.castingquality.com

8 – the third and fourth digits represent the maximum permitted carbon content in units of 0.01% (e.g., CF8 has a maximum of 0.08% carbon)

C (first letter) - means the service it is intended to be used in this case – corrosion resistant service , but Casting Quality think sometimes it means of CASTING usage because you will find F316 in ASTM A 350 ( F = FORGing)www.castingquality.com

F(second letter) -The second letter indicates the approximate location of the alloy on the iron-chromium-nickel (FeCrNi) ternary diagram. For users familiar with the diagram, the second letter does provide an indication of the nominal iron, nickel, and chromium content, but most people would have to obtain alloying information from a material specification. www.castingquality.com

C (first letter) - means the service it is intended to be used in this case – corrosion resistant service , but Casting Quality think sometimes it means of CASTING usage because you will find F316 in ASTM A 350 ( F = FORGing)www.castingquality.com

F(second letter) -The second letter indicates the approximate location of the alloy on the iron-chromium-nickel (FeCrNi) ternary diagram. For users familiar with the diagram, the second letter does provide an indication of the nominal iron, nickel, and chromium content, but most people would have to obtain alloying information from a material specification. www.castingquality.com

F(second letter) -The second letter indicates the approximate location of the alloy on the iron-chromium-nickel (FeCrNi) ternary diagram. For users familiar with the diagram, the second letter does provide an indication of the nominal iron, nickel, and chromium content, but most people would have to obtain alloying information from a material specification. www.castingquality.com

Cast Stainless Steel CD4MCu, ASTM A351Categories:

Material Notes:

Key Words:

Vendors:

Mechanical Properties

Tensile Strength, Ultimate

Tensile Strength, Yield

Elongation at Break

Component Elements Properties

Carbon, C

Chromium, Cr

Copper, Cu

Iron, Fe

Manganese, Mn

Molybdenum, Mo

Nickel, Ni

Phosphorous, P

Silicon, Si

Sulfur, S

Cast Stainless Steel CD4MCu, ASTM A351Metal; Ferrous Metal; ASTM Steel; Stainless Steel; Cast Stainless Steel

Pressure vessel

ASTM A351(94)

Metric

>= 16 %

Metric

<= 0.040 %

24.5 - 26.5 %

2.75 - 3.25 %

59.9 - 66.3 %

<= 1.0 %

1.75 - 2.25 %

4.75 - 6.0 %

<= 0.040 %

<= 1.0 %

<= 0.040 %

No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.

>= 690 MPa>= 485 MPa

English Comments

>= 16 %

English Comments

<= 0.040 %

24.5 - 26.5 %

2.75 - 3.25 %

59.9 - 66.3 % As remainder

<= 1.0 %

1.75 - 2.25 %

4.75 - 6.0 %

<= 0.040 %

<= 1.0 %

<= 0.040 %

>= 100000 psi>= 70300 psi

Cast Stainless Steel CA6NM, ASTM A352Categories:

Material Notes:

Key Words:

Vendors:

Mechanical Properties

Tensile Strength, Ultimate

Tensile Strength, Yield

Elongation at Break

Component Elements Properties

Carbon, C

Chromium, Cr

Iron, Fe

Manganese, Mn

Molybdenum, Mo

Nickel, Ni

Phosphorous, P

Silicon, Si

Sulfur, S

Cast Stainless Steel CA6NM, ASTM A352Metal; Ferrous Metal; ASTM Steel; Stainless Steel; Cast Stainless Steel

Martensitic, Pressure, Low Temperature

ASTM A352/A352M(98), UNS J91540

Metric

760 - 930 MPa

>= 15 %

Metric

<= 0.060 %

11.5 - 14 %

78.4 - 84.6 %

<= 1.0 %

0.40 - 1.0 %

3.5 - 4.5 %

<= 0.040 %

<= 1.0 %

<= 0.030 %

No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.

>= 550 MPa

English Comments

110000 - 135000 psi

>= 15 %

English Comments

<= 0.060 %

11.5 - 14 %

78.4 - 84.6 % As remainder

<= 1.0 %

0.40 - 1.0 %

3.5 - 4.5 %

<= 0.040 %

<= 1.0 %

<= 0.030 %

>= 79800 psi

Cast Stainless Steel CF8M, ASTM A351Categories:

Material Notes:

Key Words:

Vendors:

Mechanical Properties

Tensile Strength, Ultimate

Tensile Strength, Yield

Elongation at Break

Component Elements Properties

Carbon, C

Chromium, Cr

Iron, Fe

Manganese, Mn

Molybdenum, Mo

Nickel, Ni

Phosphorous, P

Silicon, Si

Sulfur, S

Cast Stainless Steel CF8M, ASTM A351Metal; Ferrous Metal; ASTM Steel; Stainless Steel; Cast Stainless Steel

Pressure vessel

ASTM A351(94)

Metric

>= 30 %

Metric

<= 0.080 %

18 - 21 %

60.8 - 71 %

<= 1.5 %

2.0 - 3.0 %

9.0 - 12 %

<= 0.040 %

<= 1.5 %

<= 0.040 %

No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.

>= 485 MPa>= 205 MPa

English Comments

>= 30 %

English Comments

<= 0.080 %

18 - 21 %

60.8 - 71 % As remainder

<= 1.5 %

2.0 - 3.0 %

9.0 - 12 %

<= 0.040 %

<= 1.5 %

<= 0.040 %

>= 70300 psi>= 29700 psi

MetalTek WCB UNS J13345 Cast Alloy SteelCategories:

Material Notes:

Key Words:

Vendors:

Mechanical Properties

Hardness, Brinell

Tensile Strength, Ultimate

Tensile Strength, Yield

Elongation at Break

Component Elements Properties

Carbon, C

Iron, Fe

Manganese, Mn

Silicon, Si

Descriptive Properties

Heat Treatment

MetalTek WCB UNS J13345 Cast Alloy SteelMetal; Ferrous Metal; Alloy Steel; AISI 4000 Series Steel

General structural use.

Applications: Cylinders, rolls, hollow shafts.

Information provided by MetalTek

Metric

255

480 - 655 MPa

>= 22 %

Metric

<= 0.30 %

>= 98.1 %

<= 1.0 %

<= 0.60 %

Descriptive Properties

Quench & Temper

Cast UNS J13345; Cast Grade 9B; Cast ASTM A216; Wrought UNS G41300; Wrought Grade AISI 4130No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.

>= 275 MPa

English Comments

255

69600 - 95000 psi

>= 22 %

English Comments

<= 0.30 %

>= 98.1 % As Balance

<= 1.0 %

<= 0.60 %

Descriptive Properties

Quench & Temper

>= 39900 psi