Upload
hafizmahmud
View
220
Download
0
Embed Size (px)
Citation preview
8/12/2019 Material Science and Engineering - Project Report
http://slidepdf.com/reader/full/material-science-and-engineering-project-report 1/5
MATERIAL SCIENCE AND ENGINEERING (MME 2503)
SECTION 2, SEMESTER 2, 2013/2014
PROJECT REPORT: NECKTIE PHONE CASE
Lecturer: Madam Maizatulnisa Binti Othman
Group members: Muhammad Fahmi Bin Kamarudin 1115321
Muhammad Zulhairi Bin Zulkafli 1115359
'Arif Zuhairi Bin Yusof 1223673
Muhamad Hafiz Bin Mahmud 1223765
8/12/2019 Material Science and Engineering - Project Report
http://slidepdf.com/reader/full/material-science-and-engineering-project-report 2/5
Introduction
Necktie is one of the items that almost every man should have, especially if he is a working man
or a student. Hence, a man can have more than one piece of necktie in his collections, however,
not all are suitable to wear as some may get too old and worn out, or some may just be out of
fashion, especially for those broad and bulky neckties. Unfortunately, throwing old neckties away
are such a waste, but keeping them is just like keeping junks in the closet. Seeing this problem
and potential of neckties, we come up with a solution to reuse neckties and turn them into a
phone case which is something that everybody can benefit, especially those who always forgot
where they put their phones.
Methodology
1- Removing centre seam/stitches
This process requires careful cuttings to
ensure only the stitches are removed, this
is done to ‘open up’ the necktie for
measurement process later. The inner
fabric in the necktie is optional, but it is
better not to remove it so that the necktie
will have a better shape.
Removing center seam
8/12/2019 Material Science and Engineering - Project Report
http://slidepdf.com/reader/full/material-science-and-engineering-project-report 3/5
2- Taking dimensions
All dimensions depends on the size of the phone, it is encourage to include a few
centimeters extra so that the sewing process will not decrease the actual dimension needed
to fit the phone.
3- Sewing process + Decoration
Sewing can be done with a sewing machine or manually, some features can be added to
this product such as card holder or cash pockets. For our product, we added a pocket to
store cards.
8/12/2019 Material Science and Engineering - Project Report
http://slidepdf.com/reader/full/material-science-and-engineering-project-report 4/5
Result and Applications
This product follows the size of the phone, it is stylish since the necktie adds the elements of
classics and yet modern sense to the product. Added decorations will improve the added value
and make it look more attractive.
Phone Case
8/12/2019 Material Science and Engineering - Project Report
http://slidepdf.com/reader/full/material-science-and-engineering-project-report 5/5
Other Related Product Made From Used Neckties
Card Holder
Advantages and Disadvantages
Advantages Disadvantages
Protects the phone from scratches Does not protect the phone from impact
Cheaper than other phone cases in the market Material is easily torn
Stylish Difficult to make