Embed Size (px)
Citation preview
Page 1 of 3 (Sanox ) Date Revised: May 2013
MATERIAL SAFETY DATA SHEET
COMPANY DETAILS
Name CHEMCAPE Emergency Phone Number +27 82- 566 4136
Address UNIT 1, ELECT PARK Tel +27 21-982 7162
TEE JAY ROAD Fax +27 21-982 1544
BRACKENFELL
1. PRODUCT IDENTIFICATION
Trade Name SANOX
Product Description Surface Sanitiser
2. COMPOSITION
Chemical Components CAS No. EC No.
Hydrogen Peroxide 7722-84-1 231-765-0 Acetic Acid 64-19-7 200-580-7
3. HAZARDS IDENTIFICATION
MAIN HAZARD Corrosive to skin and eyes FLAMMABILITY Non flammable CHEMICAL HAZARD Reactive to bases, Corrosive BIOLOGICAL HAZARD No data available REPRODUCTION HAZARD No data available EYE EFFECTS (EYES) Burning and Redness HEALTH EFFECTS (SKIN) Irritant, burning HEALTH EFFECTS (INGESTION) Nausea, vomiting, irritant HEALTH EFFECTS (INHALATION) Irritation / Coughing CARCINOGENICITY None MUTAGENICITY No data available NEUROTOXICITY No data available
4. FIRST AID MEASURES FIRST AID SKIN Wash off with water Remove clothing Shower thoroughly FIRST AID EYES Flush with water for 15 minutes Hold eyelids open while washing FIRST AID INGESTED Do not induce vomiting FIRST AID INHALED Remove from contaminated area Give oxygen
Page 2 of 3 (Sanox ) Date Revised: May 2013
MATERIAL SAFETY DATA SHEET
5. FIRE FIGHTING MEASURES EXTINGUISHING MEDIA Foam or dry chemical SPECIAL HAZARDS Chemical reaction can cause fire PROTECTIVE CLOTHING Full chemical suit with breathing apparatus
6. ACCIDENTAL RELEASE MEASURES
Dilute (Substance may be washed to drain with a lot of water) SPILL OR LEAK: Stop leak if you can without risk. SMALL SPILL: Wash away with large amounts of water LARGE SPILL: Dyke liquid spill for later disposal
7. HANDLING AND STORAGE
SUITABLE MATERIAL Plastic Drums HANDLING/ STORAGE PRECAUTIONS Store in cool dry place
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
OCCUPATIONAL EXPOSURE LIMITS None ENGINEERING CONTROL MEASURES Safety showers, Adequate Ventilation PERSONAL PROTECTION – RESPIRATORY Work in places with adequate ventilation PERSONAL PROTECTION – HANDS Rubber gloves PERSONAL PROTECTION – EYES Wear goggles or face shield PERSONAL PROTECTION – SKIN Overall, Plastic apron, Gumboots, Gloves
9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE Colourless liquid ODOUR pungent PH ±3.0 BOILING POINT 1040C DENSITY 1.07 MELTING POINT N/A FLASH POINT None AUTOFLAMMABILITY None EXPLOSIVE PROPERTIES None OXIDISING PROPERTIES Yes VAPOUR PRESSURE N/A SOLUBILITY – WATER Soluble SOLUBILITY – SOLVENT Insoluble NEUROTOXITY None
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID Heat INCOMPATIBLE MATERIALS Acids HAZARDOUS DECOMPOSITION PRODUCTS Oxygen
Page 3 of 3 (Sanox ) Date Revised: May 2013
MATERIAL SAFETY DATA SHEET
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY Refer Section 3 SKIN AND EYE CONTACT Refer Section 3 CHRONIC TOXICITY Refer Section 3 CARCINOGENICITY Not listed in any OSHA standard, section 1910.1200 MUTAGENICITY No data available REPRODUCTIVE HAZARDS No data available
12. ECOLOGICAL INFORMATION
AQUATIC TOXICITY – FISH Dangerous to Aquatic Life at high concentrations AQUATIC TOXICITY – DAPHNIA Dangerous to Aquatic Life at high concentrations AQUATIC TOXICITY – ALGAE Dangerous to Aquatic Life at high concentrations BIODEGRADEABILITY Yes BIO-ACCUMULATION No MOBILITY Very mobile in water
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHODS The product is not a hazardous waste DISPOSAL OF PACKAGING Dispose of drums through a registered drum re-conditioning
company
14. TRANSPORT INFORMATION
UN NO 3109 CLASS 5.2 Packing Group II Hazchem Code 2W
15. REGULATORY INFORMATION
RISK PHASES R35 Causes severe burns R22 Harmful if swallowed SAFETY PHASES S26 In case of contact with eyes, rinse immediately with water, seek medical advice S36 S37 Wear suitable protective clothing, gloves and eye/face protection S39
16. OTHER INFORMATION
This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformance with any legal regulation. The information contained herein is based on the present state of our knowledge and is intended to describe our product from the point of view of safety requirements. It should not therefore be construed as guaranteeing specific properties.
