Material Safety Data Sheet

Material Safety Data Sheet Catalog Numbers:Becton Dickinson and Company 405609, 405619, 405621, 405637, 405638, 405639, 405643, 405644,

405645, 405650, 405651, 405652, 405668, 405671, 405672, 405673, 405674, 405675, 405676, 405689, 405690, 405698, 405699, 405701,

406701, 406704

RMS42 SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION

Product Name: Regional Anesthesia TraysChemical Family: NA

Chemical Formula: NAManufacturer: Becton Dickinson and Company

BD Medical Surgical Systems - AnesthesiaMSDS Number(s):

Address: 1 Becton DriveCity: Franklin Lakes

State: New JerseyZip Code: 07417-1884

Emergency Phone: Day: 201-847-4267;Chemtrec: 800-424-9300

Other Calls: 201-847-6800Effective Date: Nov 1, 2006; Supersedes: New

SECTION 2 - COMPOSITION INFORMATION INGREDIENTSIngredient Name NACommon Name This tray is composed of components and/or drugs. The components are

not hazardous per 29 CFR § 1910.1200.Any drug hazards are characterized below and in the attached MSDS sheet.

SECTION 3 - HAZARDS IDENTIFICATIONNPFA Ratings Health = 0, Fire = 0, Reactivity = 0

Hazards Identification Povidone Iodine is characterized as Xn Harmful and R22 Harmful if swallowed.

Other Information: Note the catalog numbers listed in this MSDS contain the following drugs:

Drugs contained in this Tray Lidocaine HCL (1%), 5mLEpinephrine (0.1%), 1 mLBupivacaine HCL (0.75%) with Dextrose (8.25%), 2 mL (Marcaine)Povidone-Iodine Topical Solution, 3/4 oz.

The Corresponding Suppliers' MSDS' for these drugs are attached to this Anesthesia Tray MSDS

1 of 4Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Material Safety Data Sheet Catalog Numbers:Becton Dickinson and Company 405609, 405619, 405621, 405637, 405638, 405639, 405643, 405644,

405645, 405650, 405651, 405652, 405668, 405671, 405672, 405673, 405674, 405675, 405676, 405689, 405690, 405698, 405699, 405701,

406701, 406704

RMS42 SECTION 4 - FIRST AID MEASURES See attached Supplier MSDS’ for additional details

Eye Contact: Remove from source of exposure Flush with copious amounts of water. If irritation persists or signs of toxicity occur, seek medical attention. Provide symptomatic/ supportive care as necessary.

Eye Contact: Remove from source of exposure Flush with copious amounts of water. If irritation persists or signs of toxicity occur, seek medical attention. Provide symptomatic/ supportive care as necessary.

Skin Contact: Remove from source of exposure. Flush with copious amounts of water. If irritation persists or signs of toxicity occur, seek medical attention. Provide symptomatic/ supportive care as necessary

Inhalation: Remove from source of exposure. If signs of toxicity occur, seek medical attention. Provide symptomatic/ supportive care as necessary

Ingestion: Remove from source of exposure. If signs of toxicity occur, seek medical attention. Provide symptomatic/ supportive care as necessary

SECTION 5 - FIRE FIGHTING PROCEDURESSuitable Extinguishing Agents Co2, ABC multipurpose dry chemical or water spray. Fight larger fires with

water spray or alcohol resistant.Protective equipment No special measures required.

See attached Supplier MSDS’ for additional details

SECTION 6 -ACCIDENTAL RELEASE MEASURESPerson-related safety precausions Not required.

Measures for environmental protoction

Wipe up with a damp sponge or mop

Measures for cleaning/collecting No special measures requiredAdditonal information No dangerouse substances released.

SECTION 7 - HANDLING AND STORAGEInformation for Safe Handling No special measures required

Information about protection against explosions and fires

No special measures required

Storage Requirements Store in a secured area away from temperature extremes. Follow manufacturer’s package insert.

Precautionary Label Statements: See attached Supplier MSDS’ for additional details

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTIONWork Hygienic Practices: The usual precautionary measures for handling chemicals should be

followed. See attached Supplier MSDS’ for additional details

2 of 4Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Material Safety Data Sheet Catalog Numbers:Becton Dickinson and Company 405609, 405619, 405621, 405637, 405638, 405639, 405643, 405644,

405645, 405650, 405651, 405652, 405668, 405671, 405672, 405673, 405674, 405675, 405676, 405689, 405690, 405698, 405699, 405701,

406701, 406704

RMS42 SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Tray components The components in these trays with the exception of the drugs are considered articles and do not require an MSDS

Drug Components Chemical and Physical properties of the drugs should be accessed via the attached Supplier's MSDS'.

SECTION 10 - STABILITY AND REACTIVITY See attached Supplier MSDS’ for additional details

Stability: Stable when used within expiration date.Conditions to Avoid: Freezing may cause the glass ampules to break

Incompatibility with Other Materials: NAHazardous Decomposition Products: Carbon dioxide and carbon monoxide.

Hazardous Polymerization: Will not occur

SECTION 11 - TOXICOLOGICAL INFOR See attached Supplier MSDS’ for additional details

No adverse health effects are known or anticipated from contact with these products.

SECTION 12 - ECOLOGICAL INFORMATIONEcological Information: The ecological effects have not been thoroughly investigated, but currently

none have been identified.

SECTION 13 - DISPOSAL CONSIDERATIONSDisposal Considerations: Contaminated materials must be disposed of according to the nature of

the contaminate. Check current local, state and federal regulations for proper disposal methods.

SECTION 14 - TRANSPORTATION INFORMATIONTransportation and Hazardous

Materials Description: None

Proper Shipping Name:DOT Label Information: No requirements

ADR/RID No requirementsIMDG No requirements

ICAO/IATA No requirements

Conditions to Avoid (Polymerization):

3 of 4Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Material Safety Data Sheet Catalog Numbers:Becton Dickinson and Company 405609, 405619, 405621, 405637, 405638, 405639, 405643, 405644,

405645, 405650, 405651, 405652, 405668, 405671, 405672, 405673, 405674, 405675, 405676, 405689, 405690, 405698, 405699, 405701,

406701, 406704

RMS42 SECTION 15 - REGULATORY INFORMATION

U.S. Federal RegulationState Regulations: California Prop 65: Chemicals Known to Cause Cancer/Reproductive

Toxiciy. The tray may contain trace amounts of Ethylene Oxide residuals from the sterilization process.

SARA 313/355 See attached Supplier MSDS’ for additional detailsTSCA See attached Supplier MSDS’ for additional detailsIARC See attached Supplier MSDS’ for additional detailsNTP See attached Supplier MSDS’ for additional details

TLV/ACGIH See attached Supplier MSDS’ for additional details

International Regulations:

SECTION 16 - OTHER INFORMATIONOther Information: Note the catalog numbers listed in this MSDS contain the following

drugs:Drugs contained in this Tray Lidocaine HCL (1%), 5mL

Epinephrine (0.1%), 1 mLBupivacaine HCL (0.75%) with Dextrose (8.25%), 2 mL (Marcaine)Povidone-Iodine Topical Solution, 3/4 oz.

The Corresponding Suppliers' MSDS' for these drugs are attached to this Anesthesia Tray MSDS

Definitions: U/K=UnknownN/A=Not Applicable

Revision History

Current Version Written by: K. Biehl

To the best of our knowledge, the information contained herein is accurate. However, neither Becton Dickinson and Company nor any of its subsidiaries assume any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Revision Details ECO No.

01 This is the first MSDS for BD Anesthesia Trays as listed in the header. ECO 53387

4 of 4Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387

MATERIAL SAFETY DATA SHEET SecilC;I1YReactIYltVDi;I , " '

Aplicare Iodophor PVP Pouches Stability Unstable Conditions to AvoidNone known.

IDENllTY(A.UoodonL"" "" u.) StableX

Section I .

Manufacture's Name Emergency Telephone Number Incompatibility (Materials to Avoid),Aplicare, Inc. Chemtrek (800) 424-9300 The elemental iodine is corrosive to some metals (I.e. iron), but is not corrosive to stainless steel.

I Address (Number, Street, City, and ZIP Code) Telephone Number for Information Hazardous Decomposition of Byproducts, 50 East Industrial Road (203) 481-0500 N/A

Date Prepared Hazardous May Occur Conditions to AvoidBranford, CT 06405 Juiy 1, 2003 Polymer- None known.

Signature of Preparer (optional) ization Will NotOccur X

sectldlfll,'H#;(J'I!()u$ IhgredientSildentity Informatlol1 ," "X Sect!onVI'"" HealUr H#arl!Pal<\ '('(ii X'!i, 'x '!X. ,Z{Other Limits Route(s) of Entry: Eyes? Inhalation? Skin? IngeStiOn?

;Hazardous Components (Specific Chemicalldentily; Common Namesls)) OSHA PEL ACGIH TLV Recommended % (ootionai) X N/A x Unlikely

Health Hazards (Acute/Chronic)Iodine (CAS #7553-56-2) 0.1 eem 1 May cause Irritation to eyes.

Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?N/A N/A N/A

Signs and Symptoms of ExposureMay cause Irritation of eyes but should not cause Irritation of respiratory tract or skin.May be harmful if swallowed.

Medical ConditionsGeneraliy Aggravated by Exposure: Unknown

Eyes: Flush with water for 15 minutes and seek physician if irritation eersists.Ingestion: Giye a suspension of starch or flour In water, induce emesis and call a physician.

.Sectldn'IIF"'Phys/caIiChemlt:31CharacterIstics', ,;,,@'(' "/" Section VII'-PrecajJtlonsJI)"SafeHal1dllngand,Use" "'/' ,;,.0 TV: Boiling Point Specific Gravity (Water. 1) Steps to Be taken in Case Materials is Released or Spilled

212'F 1.04 It is unlikely that this eroduct, when spilled, will cause a eroblem: packaged asVapor Pressure (mm Hg.) Meiting Point individual packets containing 28 -120 mL of solution.

Unknown N/A

Vapor Density (AIR 1) Evaporation RateUnknown (Butyl Acetate = 1) Unknown

Solubility in Water Waste Disposal MethodSoluble. Any solution that is spilled may be wiped up with towelling and disposed of with garbage.

Appearance and OdorA dark brown liquid solution with a faint characteristic odor.

SectldhJV";'FIJ'eandExetos/onHaZard Data,.,

x;;;V';(, "',(;i(;'!'(';,;".,; ,,! ';.. ',,;;

Flash Point (Method Used) Flammable LimitsILEL

IUEL Precautions to Be taken in Handlingand StoringUnknown Non-flammable N/A N/A Avoid storina in excessive heat (Greater than 104'F).

Extinguishing MediaWater, carbon dioxide, eowder.

Special Fire Fighting Procedures Other PrecautionsNone specified. None.

Unusual Fire and Explosion HazardsHarsh iodine fumes are emitted when eroduct is heated to greater than 176'F (80'C)

SECTiON VIII,-CONTRClIJME;SURES x (;( ";Respiratory Protection Seecily Tyee) No personal protective equipment needed.Ventilation ILocal Exhaust X ISeedal N/A

Mechanical (General) N/A IOther N/AProtective Gloves If desired Eye Protection: tf desired.Other Protective Clothing or Equipment None reaulredWork/Hygienic Practices Normal

Print Date: Version: Status: Release Date: Releasing ECO:

11/14/2006 1.0 Released09/22/2006 ECO53387