MATERIAL SAFETY DATA SHEET · Appearance & Odor: Amber paste, petroleum odor Part Number(s): 10-1207 Page 1 of 3 JOHNSON MANUFACTURING COMPANY Material Safety Data Sheet to comply

Part Number(s): 10-1207

Product Type: Solder FluxProduct Name: SOLDERING PASTEPart Number(s): 10-1207

Emergency Contact: ChemtrecPhone: (800) 424-9300

MATERIAL SAFETY DATA SHEETComplies with OSHA Hazard Communication Standard 29 CFR 1910.1200

Product Name: SOLDERING PASTE

1801 Morgan StreetRockford, IL 61102Phone: (815) 968-9661 Fax: (815) 968-9731 www.gcelectronics.com

MSDS Number: 123Revision Date: 8/27/2012

Supersedes Date: 9/16/2009

Page 1 of 4

JOHNSON MANUFACTURING COMPANY Material Safety Data Sheet

to comply with 29 CFR 1910.1200, OSHA's Hazard Communication Standard

Johnson's Soldering Paste, 05-00

Section 1: Product and Company InformationJohnson Manufacturing Company Emergency Telephone (563)-289-5123 114 Lost Grove Road CHEMTREC after hours 1-(800)-424-9300 Princeton IA 52768 Revised 1/1/2006

Section 2: Hazardous Ingredients

Hazardous Component CAS # OSHA TWA ACGIH TWA Other limits WT% + Zinc Chloride 7646-85-7 1mg/M3 1mg/M3 NE 25 % Ammonium Chloride 12125-02-9 10mg/M3 10mg/M3 NE (As Zinc Ammonium Chloride) Petrolatum 8009-03-8 5mg/M3 mist 5mg/M3 mist NE

Only those ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. An ingredient marked with an asterisk(*) is also listed in 29CFR 1910.1200(D) #4 as a known or suspected cancer hazard. None+ denotes a chemical regulated as toxic by the Environmental Protection Agency (EPA) as outlined in

40CFR Part 372 (section 313)

Section 3: Physical/C hemical Characteristics

Boiling Point: NE

Speci�c Gravity: 1.02 Vapor Pressure (mm Hg): NE Melting Point: 82 F Vapor Density: NE

Evaporation Rate (butyl acetate=1): < 1 Solubility in water: 20 % Appearance and odor: Amber paste, petroleum odor

Section 4: Fire and Explosion Hazard Data

Flash Point: 490 F TOC Flammable Limits: LEL: NA UEL: NA Extinguishing Media: AllSpecial Fire Fighting Procedures: NONE Unusual Fire and Explosion Hazards: May release hydrochloric acid, zinc chloride, zinc oxide, hydrocarbons.

Section 5: Reactivity Data

Stability : STABLE Conditions to avoid : None Incompatibility (materials to avoid):O xidizers, strong acids & bases, sul�des. Hazardous Decomposition or Byproducts (incomplete combustion): Hydrochloric acid, zinc oxide, ammonia,

zinc chloride, hydrocarbons. Hazardous Polymerization: WILL NOT OCCUR Conditions to avoid: None

p j g p j p









Page 1 of 4










Boiling Point: NE








p j g p j p









Page 1 of 4









Section 3: Physical/Chemical Characteristics

Boiling Point: NE Specific Gravity: 1.02 Vapor Pressure (mm Hg): NE Melting Point: 82 F Vapor Density: NE Evaporation Rate (butyl acetate=1): < 1 Solubility in water: 20 % Appearance and odor: Amber paste, petroleum odor


Flash Point: 490 F TOC Flammable Limits LEL: NA UEL: NA Extinguishing Media: AllSpecial Fire Fighting Procedures: NONE Unusual Fire and Explosion Hazards: May release hydrochloric acid, zinc chloride, zinc oxide, hydrocarbons.


Stability : STABLE Conditions to avoid : none Incompatibility (materials to avoid):oxidizers, strong acids & bases, sulfides. Hazardous Decomposition or Byproducts (incomplete combustion): Hydrochloric acid, zinc oxide, ammonia, zinc chloride, hydrocarbons. Hazardous Polymerization: WILL NOT OCCUR Conditions to avoid: none

Page 1 of 2Soldering Paste 05-00

p j g p j p

GC Electronics Product Name: Soldering Paste 1801 Morgan Street MSDS Number: 123 Rockford, IL 61102 Revision Date: 9/16/09 Phone: (815) 968-9661 Supersedes Date: 7/11/06 Fax: (815) 968-9731 www.gcelectronics.com

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200

Product Type: Solder Flux Product Name: Soldering PastePart Number(s): 10-1207 Emergency Contact: Chemtrec Phone: (800) 424-9300

Section 1 – Identification of Product

HMIS Ratings: NFPA Classifications: Least 0 Slight 1 Health 2 Health 2 Moderate 2 Flammability 1 Flammability 1 High 3 Reactivity 0 Reactivity 0 Extreme 4 Personal Protection B Gloves, Safety Glasses B

Section 2 – Hazardous Ingredients

Hazardous Component CAS # WT% OSHA TWA ACGIH TWA Other Limits + Zinc Chloride 7646-85-7 25 1 mg/M3 1 mg/M3 NE Ammonium Chloride (as Zinc Ammonium Chloride)

12125-02-9 10 mg/M3 10 mg/M3 NE

Petrolatum 8009-03-8 5 mg/M3 mist 5 mg/M3 mist NE

Only those ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200.+ denotes a chemical regulated as toxic by the Environmental Protection Agency (EPA) as outlined in 40CFR Part 372 (section 313)

This product contains components known to the State of California to cause cancer or reproductive harm: None

Section 3 – Physical Data

Boiling Point: NE Specific Gravity: 1.02 Vapor Pressure (mm Hg): NE Melting Point: 82FVapor Density: NEEvaporation Rate: (butyl acetate=1): <1 Solubility in Water: 20%Appearance & Odor: Amber paste, petroleum odor

Part Number(s): 10-1207 Page 1 of 3
















p j g p j p
















p j g p j p










Boiling Point: NE








p j g p j p

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

SECTION 2: HAZARDOUS INGREDIENTS

SECTION 3: PHYSICAL/CHEMICAL CHARACTERISTICS










Boiling Point: NE








p j g p j p

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

SECTION 2: HAZARDOUS INGREDIENTS

SECTION 3: PHYSICAL/CHEMICAL CHARACTERISTICS

MATERIAL SAFETY DATA SHEET





Page 2 of 4










Boiling Point: NE








p j g p j p










Boiling Point: NE








p j g p j p



Section 6: Health Hazard Data Routes of entry: Inhalation? yes Skin? no Ingestion? yesHealth Hazards (acute and chronic): Contact with material or fumes may cause skin, eye and respiratory tract irritation or burns. Severe inhalation can cause pulmonary edema, which may not manifest for several hoursafter exposure. Ingestion may result in irritation or burning of the digestive tract. Gross inhalation or ingestioncan result in death. LD50 (ZnCl2)(rat)=350 mg/kg. May be mutagenic in lab animals. May cause sensitization.Chronic exposures can result in permanent liver, kidney and . Studies show that health risks vary by individual. Minimize exposure as a precaution. Carcinogenicity: not determined NPT? no IARC Monographs? no Signs and symptoms of exposure:

Inhalation-Nose & throat irritation, headache, dizziness

Ingestion-nausea, vomiting, cramps.

Skin-redness, burning, rash, dryness. Eye-redness, burning, tearing, blurred vision. Medical conditions aggravated by exposure: Skin, kidney and respiratory conditions.

Section 6: Health Hazard Data (Continued)

Emergency rst aid procedures: Skin: Flush with water immediately - Seek medical attention if necessary Eyes: Flush with water for 15 minutes - Seek medical attention Ingestion: DO NOT induce vomiting, drink large amounts of water - seek medical attention. Never give anything by mouth to an unconscious person Inhalation: Remove to fresh air. Support respiration if required - Seek medical attention. Section 7: Precautions for Safe Handling and Use

Steps to be taken if material is released or spilled: Flush into a chemical sewer or soak up with a suitable absorbent.

Waste Disposal Method: Dispose of in accordance with all local state and federal regulations Other Precautions: Avoid skin & eye contact, inhalation & ingestion of fumes and material. Wash contaminated clothing before reuse. Keep away from children. Do not reuse container.

Section 8: Control Measures

Respiratory Protection (type): Organics/Acid type respirator for fumes and mist. Ventilation Local Exhaust preferred Special: NE Mechanical: OK Other: NE Protective Gloves: plastic or rubber Eye Protection: Goggles or face shield Other Protective Clothing or Equipment: As required to avoid contact. Work/Hygenic Practices: Wash after use. Follow good industrial hygienic practices.

Section 9: Additional Information DOT Classi cation: Non-Hazardous NFPA Classi cation (NFPA 325M,8th edition)(Health, Flammability, Reactivity): 2-1-0

This product contains components known to the state of California to cause cancer or reproductive harm: None

NE- not established NA = not applicable

GC DISCLAIMER


SECTION 4: FIRE AND EXPLOSION HAZARD DATA

SECTION 5: REACTIVITY DATA

SECTION 6: HEALTH HAZARD DATA




Page 3 of 4


















GC DISCLAIMER















GC DISCLAIMER















GC DISCLAIMER


SECTION 6: HEALTH HAZARD DATA (CONTINUED)

SECTION 7: PRECAUTIONS FOR SAFE HADLING AND USE

SECTION 8: CONTROL MEASURES


Page 4 of 4



GC Electronics believes that the information contained herein is accurate and reliable as of the date of this material safety data sheet, but no representation guarantee or warranty, express or implied, is made as to the accuracy, reliability or completeness of the information. Persons receiving information are encouraged to maketheir own determination as to the information’s suitability and completeness for their particular application. NO INFORMATION CONTAINED HEREIN CONSTITUTES A PRODUCT WARRANTY OF ANY KIND, WHETHEREXPRESS OR IMPLIED; AND ALL IMPLIED WARRANTIES OF MERCHANT ABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY GC ELECTRONICS.





SECTION 9: ADDITIONAL INFORMATION

DOT Classification: Non-HazardousHazard Class: NoneUN#: NoneLabel: None

NFPA Classification (NFPA 325M 8th edition) (Health, Flammability, Reactivity): 2-1-0


NE-Not Established NA-Not Applicable

Documents

MATERIAL SAFETY DATA SHEET · Appearance & Odor: Amber paste, petroleum odor Part Number(s): 10-1207 Page 1 of 3 JOHNSON MANUFACTURING COMPANY Material Safety Data Sheet to comply