Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 1 of 5
1. Identification of the substance/mixture and of the company 1.1 Product identifiers
Product name : Steroids Test A
Product number : STERA0110
Brand : MMC International
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : M.M.C. International B.V.
Frankenthalerstraat 16-18
4816KA Breda
The Netherlands
Telephone : +31 76-5711140
Fax : +31 76-5719300
E-mail address : [email protected]
1.4 Emergency telephone number
Emergency Phone # : 112
2. Hazards identification 2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1A), H314
Acute toxicity, Inhalation (Category 4)
Acute toxicity, Oral (Category 4)
Acute aquatic toxicity (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C Corrosive R35
Very toxic to aquatic organisms. Harmful by inhalation and if swallowed.
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Hazard statement(s)
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H332 Harmful if inhaled.
H400 Very toxic to aquatic life.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 2 of 5
Precautionary statement(s)
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard Statements
R-phrase(s)
R20/22 Harmful by inhalation and if swallowed.
R50 Very toxic to aquatic organisms.
S-phrase(s)
S24/25 Avoid contact with skin and eyes.
S61 Avoid release to the environment. Refer to special instructions/ Safety
data sheets.
2.3 Other hazards - none
3. Composition/information on ingredients 3.1 Mixture:
Component CAS-No. Concentration
Sulfuric acid 7664939 90-97%
4. First aid measures 4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a
physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth
with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2)
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 3 of 5
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5. Firefighting measures 5.1 Extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Sulphur oxides, Carbon oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers
6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures
Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls
after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form
explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or
vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a
non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal
according to local regulations.
7. Handling and storage 7.1 Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated
areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or
repeated exposure. Wash thoroughly after handling.
7.2 Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers
should be completely drained and bunged and then disposed of according to local, state, and
federal regulations.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 4 of 5
8. Exposure controls/personal protection 8.1 Ventilation Requirements:
Use only in well-ventilated areas.
8.2 Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing.
9. Physical and chemical properties 9.1 Information on basic physical and chemical properties
Boiling Point: NE
Melting Point: 3 °C
Evaporation Rate NE
Vapor Pressure (mm Hg.): 1,33 hPa at 145,8 °C
Specific Gravity (H20 = 1): 1,80 - 1,84 g/cm3
Vapor Density (AIR = 1): 3,39
Solubility In Water: Miscible
Other Information:
Appearance and Odor: colourless, Acidic odour
10. Stability and reactivity 10.1 Stability:
Stable at room temperature in closed containers under normal storage and handling conditions .
10.2 Incompatibility (Materials to Avoid):
(Strong) Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides,
Chlorates, alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen
peroxide, Azides, Perchlorates., Nitromethane, phosphorous, Strong oxidizing agents. Reacts
violently with:, cyclopentadiene, cyclopentanone oxime, nitroaryl amines, hexalithium disilicide,
phosphorous(III) oxide, Powdered metals
10.3 Decomposition/By Products:
No data available
10.4 Hazardous Polymerization:
Does not occur.
11. Toxicological information 11.1 Information on toxicological effects
May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the
skin. May cause central nervous system depression. May cause liver and kidney damage. May
cause adverse reproductive and fetal effects based on animal testing.
12. Ecological information 12.1 Adverse effects
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 5 of 5
13. Disposal considerations 13.1 Information on disposal
Dispose according to local, state, and federal regulations.
14. Transport information 14.1 Information on transport
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid
contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly
after handling.
15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or
mixture
No data available
16. Other information 16.1 Risks
Using this product under normal, properly instructed procedures should not be hazardous.
16.2 Further Information
The information above is believed to be accurate and represents the best information currently
available to us but does not purport to be all inclusive and shall be used only as a guide. We
make no warranty of merchantability or any other warranty, expressed or implied, with respect
to such information, and we assume no liability resulting from its use. Users should make their
own investigation to determine the suitability of the information for their particular purposes.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 1 of 5
1. Identification of the substance/mixture and of the company 1.1 Product identifiers
Product name : Steroids B Test
Product number : STERB0110
Brand : MMC International
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : M.M.C. International B.V.
Frankenthalerstraat 16-18
4816KA Breda
The Netherlands
Telephone : +31 76-5711140
Fax : +31 76-5719300
E-mail address : [email protected]
1.4 Emergency telephone number
Emergency Phone # : 112
2. Hazards identification 2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1A), H314
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C Corrosive R35
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Hazard statement(s)
H314 Causes severe skin burns and eye damage.
Precautionary statement(s)
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard Statements
None
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 2 of 5
2.3 Other hazards - none
3. Composition/information on ingredients 3.1 Mixture:
Component CAS-No. Concentration
Sulfuric acid 7664939 90-97%
4. First aid measures 4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a
physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth
with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2)
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5. Firefighting measures 5.1 Extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment.
5.2 Special hazards arising from the substance or mixture
Sulphur oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 3 of 5
5.4 Further information
Use water spray to cool unopened containers
6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures
Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls
after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form
explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or
vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a
non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal
according to local regulations.
7. Handling and storage 7.1 Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated
areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or
repeated exposure. Wash thoroughly after handling.
7.2 Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers
should be completely drained and bunged and then disposed of according to local, state, and
federal regulations.
8. Exposure controls/personal protection 8.1 Ventilation Requirements:
Use only in well-ventilated areas.
8.2 Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing.
9. Physical and chemical properties 9.1 Information on basic physical and chemical properties
Boiling Point: NE
Melting Point: 3 °C
Evaporation Rate NE
Vapor Pressure (mm Hg.): 1,33 hPa at 145,8 °C
Specific Gravity (H20 = 1): 1,80 - 1,84 g/cm3
Vapor Density (AIR = 1): 3,39
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 4 of 5
Solubility In Water: Miscible
Other Information:
Appearance and Odor: colourless, Acidic odour
10. Stability and reactivity 10.1 Stability:
Stable at room temperature in closed containers under normal storage and handling conditions .
10.2 Incompatibility (Materials to Avoid):
Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates,
alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide,
Azides, Perchlorates., Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene,
cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(III) oxide,
Powdered metals
10.3 Decomposition/By Products:
No data available
10.4 Hazardous Polymerization:
Does not occur.
11. Toxicological information 11.1 Information on toxicological effects
May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the
skin. May cause central nervous system depression. May cause liver and kidney damage. May
cause adverse reproductive and fetal effects based on animal testing.
12. Ecological information 12.1 Adverse effects
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
13. Disposal considerations 13.1 Information on disposal
Dispose according to local, state, and federal regulations.
14. Transport information 14.1 Information on transport
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid
contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly
after handling.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 5 of 5
15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or
mixture
No data available
16. Other information 16.1 Risks
Using this product under normal, properly instructed procedures should not be hazardous.
16.2 Further Information
The information above is believed to be accurate and represents the best information currently
available to us but does not purport to be all inclusive and shall be used only as a guide. We
make no warranty of merchantability or any other warranty, expressed or implied, with respect
to such information, and we assume no liability resulting from its use. Users should make their
own investigation to determine the suitability of the information for their particular purposes.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 1 of 5
1. Identification of the substance/mixture and of the company 1.1 Product identifiers
Product name : Ephedrine HCl Test
Product number : EPH0110
Brand : MMC International
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : M.M.C. International B.V.
Frankenthalerstraat 16-18
4816KA Breda
The Netherlands
Telephone : +31 76-5711140
Fax : +31 76-5719300
E-mail address : [email protected]
1.4 Emergency telephone number
Emergency Phone # : 112
2. Hazards identification 2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1A), H314
Chronic aquatic toxicity (Category 3), H412
Oxidizing solids (Category 3), H272
Acute toxicity, Oral (Category 3), H301
Eye irritation (Category 2), H319
Acute aquatic toxicity (Category 1), H400
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C Corrosive R35
O Oxidising R8
T Toxic R25
N Dangerous for the environment R50
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Hazard statement(s)
H272 May intensify fire; oxidiser.
H301 Toxic if swallowed.
H314 Causes severe skin burns and eye damage.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 2 of 5
H319 Causes serious eye irritation.
H400 Very toxic to aquatic life.
H412 Harmful to aquatic life with long lasting effects.
Precautionary statement(s)
P220 Keep/Store away from clothing/ combustible materials.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P301 + P310 Immediately call a POISON CENTER or doctor/ physician.
2.3 Other hazards - none
3. Composition/information on ingredients 3.1 Mixture:
Component CAS-No. Concentration
Filmerine 7632000 10-20%
Oil of vitriol 7664939 80-90%
4. First aid measures 4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a
physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth
with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2)
4.3 Indication of any immediate medical attention and special treatment needed
No data available
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 3 of 5
5. Firefighting measures 5.1 Extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers
6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures
Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls
after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form
explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or
vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a
non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal
according to local regulations.
7. Handling and storage 7.1 Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated
areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or
repeated exposure. Wash thoroughly after handling.
7.2 Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers
should be completely drained and bunged and then disposed of according to local, state, and
federal regulations.
8. Exposure controls/personal protection 8.1 Ventilation Requirements:
Use only in well-ventilated areas.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 4 of 5
8.2 Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing.
9. Physical and chemical properties 9.1 Information on basic physical and chemical properties
Boiling Point: 290 °C*
Melting Point: 3 °C*
Evaporation Rate (Butyl Acetate = 1): NE
Vapor Pressure (mm Hg.): 1,33 hPa at 145,8 °C *
Specific Gravity (H20 = 1):1,84 g/cm3 at 25 °C *
Vapor Density (AIR = 1): 3,39 - (Air = 1.0) *
Solubility In Water: Miscible*
Other Information: * Info for oil of vitriol.
Appearance and Odor: Transparent
10. Stability and reactivity 10.1 Stability:
Stable at room temperature in closed containers under normal storage and handling conditions .
10.2 Incompatibility (Materials to Avoid):
Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates,
alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide,
Azides, Perchlorates., Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene,
cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(III) oxide,
Powdered metals, Acids, Ammonia, Cyanides, Amines, Activated carbon
10.3 Decomposition/By Products:
Other decomposition products - no data available
10.4 Hazardous Polymerization:
Does not occur.
11. Toxicological information 11.1 Information on toxicological effects
Headache, Nausea, Incoordination., Absorption into the body leads to the formation of
methemoglobin which in sufficient concentration causes cyanosis. Onset may be delayed 2 to 4
hours or longer.
Liver - Irregularities - Based on Human Evidence
12. Ecological information 12.1 Adverse effects
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
Creation date: Friday December 20, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 5 of 5
13. Disposal considerations 13.1 Information on disposal
Dispose according to local, state, and federal regulations.
14. Transport information 14.1 Information on transport
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid
contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly
after handling.
15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or
mixture
No data available
16. Other information 16.1 Risks
Using this product under normal, properly instructed procedures should not be hazardous.
16.2 Further Information
The information above is believed to be accurate and represents the best information currently
available to us but does not purport to be all inclusive and shall be used only as a guide. We
make no warranty of merchantability or any other warranty, expressed or implied, with respect
to such information, and we assume no liability resulting from its use. Users should make their
own investigation to determine the suitability of the information for their particular purposes.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 1 of 5
1. Identification of the substance/mixture and of the company 1.1 Product identifiers
Product name : Clenbuterol test
Product number : CLEN0110
Brand : MMC International
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : M.M.C. International B.V.
Frankenthalerstraat 16-18
4816KA Breda
The Netherlands
Telephone : +31 76-5711140
Fax : +31 76-5719300
E-mail address : [email protected]
1.4 Emergency telephone number
Emergency Phone # : 112
2. Hazards identification 2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 2, 4), H300, H302
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Skin corrosion (Category 1A, 1B), H314
Germ cell mutagenicity (Category 2), H341
Reproductive toxicity (Category 2), H361f
Specific target organ toxicity - repeated exposure (Category 1), H372
Acute aquatic toxicity (Category 1), H400
Chronic aquatic toxicity (Category 1), H410
Flammable liquids (Category 3), H226
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22
Xi Irritant R36/38
T+ Very toxic R28
T Toxic R48/24/25
C Corrosive R34/R35
N Dangerous for the R50/53
environment
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 2 of 5
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Hazard statement(s)
H226 Flammable liquid and vapour.
H300 Fatal if swallowed.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H341 Suspected of causing genetic defects.
H361f Suspected of damaging fertility.
H372 Causes damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard Statements
None
2.3 Other hazards - none
3. Composition/information on ingredients 3.1 Mixture:
Component CAS-No. Concentration
Distilled water 7732-18-5 50-75%
Acetic acid 64-19-7 25-50
4. First aid measures 4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 3 of 5
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a
physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth
with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2)
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5. Firefighting measures 5.1 Extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen chloride gas, harmful metal oxides.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers
6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures
Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls
after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form
explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or
vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a
non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal
according to local regulations.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 4 of 5
7. Handling and storage 7.1 Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated
areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or
repeated exposure. Wash thoroughly after handling.
7.2 Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers
should be completely drained and bunged and then disposed of according to local, state, and
federal regulations.
8. Exposure controls/personal protection 8.1 Ventilation Requirements:
Use only in well-ventilated areas.
8.2 Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing.
9. Physical and chemical properties 9.1 Information on basic physical and chemical properties
Boiling Point: NE
Melting Point: >100 °C
Evaporation Rate NE
Vapor Pressure (mm Hg.): NE
Specific Gravity (H20 = 1): 1 g/cm3
Vapor Density (AIR = 1): NE
Solubility In Water: Miscible
Other Information:
Appearance and Odor: Yellow colour, Acidic odour
10. Stability and reactivity 10.1 Stability:
Stable at room temperature in closed containers under normal storage and handling conditions .
10.2 Incompatibility (Materials to Avoid):
Oxidizing agents, Soluble carbonates and phosphates, Hydroxides, Metals, Peroxides,
permanganates, e.g. potassium permanganate, Amines, Alcohols, Nitric acid, Strong oxidizing
agents, Strong bases, Strong reducing agents, Nickel, Strong acids, and its alloys, Steel (all types
and surface treatments), Aluminum, Alkali metals, Brass, Magnesium, Zinc, cadmium, Copper
10.3 Decomposition/By Products:
No data available
10.4 Hazardous Polymerization:
Does not occur.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 5 of 5
11. Toxicological information 11.1 Information on toxicological effects
May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the
skin. May cause central nervous system depression. May cause liver and kidney damage. May
cause adverse reproductive and fetal effects based on animal testing.
12. Ecological information 12.1 Adverse effects
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
13. Disposal considerations 13.1 Information on disposal
Dispose according to local, state, and federal regulations.
14. Transport information 14.1 Information on transport
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid
contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly
after handling.
15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or
mixture
No data available
16. Other information 16.1 Risks
Using this product under normal, properly instructed procedures should not be hazardous.
16.2 Further Information
The information above is believed to be accurate and represents the best information currently
available to us but does not purport to be all inclusive and shall be used only as a guide. We
make no warranty of merchantability or any other warranty, expressed or implied, with respect
to such information, and we assume no liability resulting from its use. Users should make their
own investigation to determine the suitability of the information for their particular purposes.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 1 of 5
1. Identification of the substance/mixture and of the company 1.1 Product identifiers
Product name : Stanozolol Oxandrolone test
Product number : STOX0110
Brand : MMC International
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : M.M.C. International B.V.
Frankenthalerstraat 16-18
4816KA Breda
The Netherlands
Telephone : +31 76-5711140
Fax : +31 76-5719300
E-mail address : [email protected]
1.4 Emergency telephone number
Emergency Phone # : 112
2. Hazards identification 2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1A), H314
Acute toxicity, Oral (Category 3)
Acute toxicity, Inhalation (Category 1)
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C Corrosive R35
Toxic if swallowed. Very toxic by inhalation. Irritating to eyes, respiratory system and skin.
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Hazard statement(s)
H301 Toxic if swallowed
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H330 Fatal if inhaled.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 2 of 5
H335 May cause respiratory irritation.
Precautionary statement(s)
P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P284 Wear respiratory protection
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard Statements
None
2.3 Other hazards
R-phrase(s)
R25 Toxic if swallowed.
R26 Very toxic by inhalation.
R36/37/38 Irritating to eyes, respiratory system and skin.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
3. Composition/information on ingredients 3.1 Mixture:
Component CAS-No. Concentration
Sulfuric acid 7664939 90-97%
4. First aid measures 4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a
physician.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 3 of 5
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth
with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
Headache, Tremors, To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated. The most important known symptoms and
effects are described in the labelling (see section 2.2)
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5. Firefighting measures 5.1 Extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment.
5.2 Special hazards arising from the substance or mixture
Dangerous oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers
6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures
Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls
after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or
vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a
non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal
according to local regulations.
7. Handling and storage 7.1 Precautions to be Taken:
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 4 of 5
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated
areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or
repeated exposure. Wash thoroughly after handling.
7.2 Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers
should be completely drained and bunged and then disposed of according to local, state, and
federal regulations.
8. Exposure controls/personal protection 8.1 Ventilation Requirements:
Use only in well-ventilated areas.
8.2 Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing.
9. Physical and chemical properties 9.1 Information on basic physical and chemical properties
Boiling Point: NE
Melting Point: 3 °C
Evaporation Rate NE
Vapor Pressure (mm Hg.): 1,33 hPa at 145,8 °C
Specific Gravity (H20 = 1): 1,80 - 1,84 g/cm3
Vapor Density (AIR = 1): 3,39
Solubility In Water: Miscible
Other Information:
Appearance and Odor: colourless, Acidic odour
10. Stability and reactivity 10.1 Stability:
Stable at room temperature in closed containers under normal storage and handling conditions .
10.2 Incompatibility (Materials to Avoid):
Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates,
alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide,
Azides, Perchlorates., Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene,
cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(III) oxide,
Powdered metals, Strong acids and oxidizing agents
10.3 Decomposition/By Products:
No data available
10.4 Hazardous Polymerization:
Does not occur.
Creation date: Friday, December 20th, 2013
M.M.C. International B.V. MSDS – Material Safety Data Sheet
Page 5 of 5
11. Toxicological information 11.1 Information on toxicological effects
May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the
skin. May cause central nervous system depression. May cause liver and kidney damage. May
cause adverse reproductive and fetal effects based on animal testing.
12. Ecological information 12.1 Adverse effects
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
13. Disposal considerations 13.1 Information on disposal
Dispose according to local, state, and federal regulations.
14. Transport information 14.1 Information on transport
Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition
sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid
contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly
after handling.
15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or
mixture
No data available
16. Other information 16.1 Risks
Using this product under normal, properly instructed procedures should not be hazardous.
16.2 Further Information
The information above is believed to be accurate and represents the best information currently
available to us but does not purport to be all inclusive and shall be used only as a guide. We
make no warranty of merchantability or any other warranty, expressed or implied, with respect
to such information, and we assume no liability resulting from its use. Users should make their
own investigation to determine the suitability of the information for their particular purposes.
Steroid Substances Steroid Test A Colour Steroid Test B Colour Steroid Test B Colour with UV Light Stanozolol/ Oxandrolone TestClenbuterol/ Oxymetholone
TestEphedrine Test
Alfadolone Orange Yellow Nil - - -
Androsterone Orange Yellow White - - -
Beclometasone Brown–yellow Orange Nil - - -
Betamethasone Orange–brown Pink–Orange Nil - - -
Boldenone Base (Equipoise, Ganabol) (pure powder) Warm red after 2 min. Dark Orange after 2 min. Bright Light Orange - - -
Boldenone Undecanoate (oil) Dark brownish-red Dark Red Bright Light Orange - - -
Boldenone Undecylenate (oil) Orange - Light Brown Dark Orange → Brown Bright Light Orange-Yellow - - -
Carbenoxolone (CBX) Orange Yellow Yellow - - -
Cholesterol Violet Orange White - - -
Clenbuterol (Spiropent, Ventipulmin) - - - - Purple -
Clomiphene (Androxal, Clomid, Omifin)Dark brown with yellow-green on
the sides of the ampoule
Dark brown with yellow-green on the
sides of the ampouleNil Dark brown to black No reaction Dark brown to black
Cortisone Orange Yellow Green - - -
Desoxycortone Blue–black Yellow Yellow - - -
Dexamethasone Yellow Orange–pink Nil - - -
Dienestrol Yellow Orange–red Nil - - -
Diethylstilbestrol (DES) Orange (→yellow–green) Nil - - -
Dimethisterone Brown–green Orange–red Yellow - - -
Drostanolone Propionate (Masteron) (oil) Bright green Yellow-Orange Orange - - -
Dydrogesterone (Duphaston) - Orange Green-Yellow - - -
Enoxolone Orange Yellow Green-Yellow - - -
Ephedrine (also for Pseudo- and Nor-Ephedrine) - - - - - Orange
Estradiol (Oestradiol) Orange Yellow Green - - -
Estriol Orange No colour Orange in daylight - - -
Estrone (Oestrone) Orange Green–yellow Green–yellow - - -
Ethinylestradiol Pink Red–orange Orange - - -
Fludrocortisone (Florinef) Brown Orange -Brown Green - - -
Fludroxycortide (Haelan, Cordran) Yellow Yellow Quenched - - -
Fluocinolone (Flucort-N) Yellow Yellow Quenched - - -
Fluocortolone Red–brown Orange–yellow Weak - - -
Fluoxymesterone (Halotestin) Yellow Yellow Quenched - - -
Hydrocortisone (Cortisol) Yellow–brown Green, orange (dichroic) Green - - -
Hydroxyprogesterone Blue, violet (dichroic) Yellow Quenched - - -
Mestranol Red Orange–red Orange - - -
Metenolone Enanthate (Primobolan) (Oil) Dark Orange-Brown Dark Orange-Brown Yellow-Orange - - -
Methandrostenolone (Averbol, Dianabol, Danabol) (pill) Red Red Nil Red-Brown - -
Methasterone (Superdrol) (pill) Light green Light yellow Nil - - -
Nandrolone Decanoate (Deca-Durabolin) (oil) Red-Brown Orange-Brown Green - - -
Nandrolone Decanoate (Deca-Durabolin) (pure powder) Yellow Green Light Orange Green - - -
M.M.C. International
Steroid Substances Steroid Test A Colour Steroid Test B Colour Steroid Test B Colour with UV Light Stanozolol/ Oxandrolone TestClenbuterol/ Oxymetholone
TestEphedrine Test
Nandrolone Phenylpropionate (Durabolin) (oil) Nil Yellowish-Orange Green - - -
Norethandrolone Red–orange Orange -Brown Green - - -
Norethisterone Orange–brown Orange -Brown Orange - - -
Noretynodrel Brown–red Orange -Brown Orange - - -
Oxandrolone (Anavar, Oxandrin) (pill) No color change No color change Nil Yellow Green after 15 minutes - -
Oxymetholone (Anadrol, Anapolon) (pill) No color change Faint yellow Nil - Gray -
Prednisolone Brown Orange–pink Green - - -
Prednisone Orange Yellow Green - - -
Progesterone Yellow Yellow Quenched - - -
Spironolactone (Aldactone) - (→yellow–green) Green - - -
Stanozolol (Winstrol) (pill) No color change No color change Nil Olive Green after 15 minutes - -
Sustanon 250 (Oil mixture of 4 testosterone esters) Orange-Brown Orange-Brown Greenish-Yellow - - -
Tamoxifen Citrate (Nolvadex, Istubal, Valodex) (pill) Yellow → Dark Orange Bright yellow → Bright Orange Nil - - -
Testosterone Cypionate (oil) Orange-Red Orange-Red Greenish-Yellow - - -
Testosterone Enanthate (oil) Orange Orange Blue-Greenish - - -
Testosterone Enanthate (pure powder) No color change Very faint yellow Blue-Greenish - - -
Testosterone Propionate (oil) Olive green Yellow Blue-Greenish - - -
Testosterone Propionate (pure powder) No color change No colour Blue-Greenish - - -
Trenbolone Acetate (oil) Yellow > light orange Yellow > light orange Green - - -
Trenbolone Enanthate (powder) Yellow > light orange Yellow > light Orange Green - - -
Trenbolone Enanthate (oil) Light orange Light Orange Green - - -
Triamcinolone Yellow (→yellow–green) NIL > Green (Slow) - - -
M.M.C. International B.V. Phone: +31 (0) 765711140
4816KA Breda The Netherlands Frankenthalerstraat 16-18
www.steroidcheck.com www.narcotictests.com
Email: [email protected] shop.narcotictests.com
Other Steroid substances which are not mentioned on this list, may create another or a similar color. In such cases, please notify the Manufacturer, so we can analyze and update this chart.
For the most recent version of this chart please visit our website www.steroidcheck.com, www.narcotictests.com or shop.narcotictests.com
The Stanozolol/ Oxandrolone, Clenbuterol/ Oxymetholone and Ephedrine tests contain crystals this is part of the test.
Step 1: Step 2:
Tap the ampoule a few times on a table or other hard surface, making the crystals fall down. Hold the plastic cap between your thumb and index finger.
Break the ampoule’s top.
Step 3a: Step 3b:
Use the included spatula to put the material directly into the ampoule (1) or in
the cap (2).
For liquid materials (e.g. “Testosteron Enanthate”), use an included pipette
and put a drop into the ampoule.
Step 4:
Step 5:
Put the cap back on the open ampoule.
Check the colour against the colour indicated in the enclosed colour chart.
Step 6 (Group B only):
Hold the test ampoule under the UV light (included) Check the colour against the colour indicated in the enclosed colour chart.
Since MMC tests are fully neutralised as they are used, you can simply deposit the test into the glass recycling bin after use.