Materiaal Metingen Testgroep BV Afdeling N.D.O. · PDF fileISO 17020 I019 - Raad van Accreditatie - Type A inspection body, in a competent, consistent and independent way Keywords:

The Dutch Accreditation Council RvA, by law appointed as the national accreditation body for The Netherlands,

hereby declares that accreditation has been granted to:

Materiaal Metingen Testgroep BV Afdeling N.D.O.

Ridderkerk

The organisation has demonstrated to be able to perform inspections, as type A inspection body, in a competent, consistent and independent way.

This accreditation is based on an assessment against the requirements as laid down in ISO/IEC 17020:2012.

The accreditation covers the activities as specified in the authorized annex bearing the registration number.

The accreditation is valid provided that the organisation continues to meet the requirements.

The accreditation with registration number:

I 019

is granted on 31 March 2016

This declaration is valid until

1 April 2020

The accreditation has been granted for the first time on

26 February 1993

' ~

lr. J.C. vanderPoel

Annex to ISO/IEC 17020:2012 declaration of accreditation for registration number: I 019, type A

of Materiaal Metingen Testgroep BV N.D.T.

This annex is valid from: 31-03-2016 to 01 -04-2020 Replaces annex dated: 21 -05-2015

Locations where activities are performed under accreditation

Location Abbreviation/ location code

MME Group - Headoffice Rid Rietdekkerstraat 16 2984 BM Ridderkerk The Netherlands

MME- Beverwijk Bev Biesland 2 1948 RJ Beverwijk The Netherlands

MME - Hengelo Hen Aquamarynstraat 114 7554 NT Hengelo The Netherlands

MME- Heerenveen Hee Siebengaweg 2 8444 DO Heerenveen The Netherlands

MME Dintelmond Din 1 Februariweg 3 4794 SM Heijningen The Netherlands

MME - Eindhoven Ein Boven Zijde 2 5626 EB Eindhoven The Netherlands

Dutch Accreditation Council RvA Page 1 of 7



This annex is valid from: 31-03-2016 to 01-04-2020 Replaces annex dated: 21-05-2015

No. Field of inspection Type and Range of Methods and Procedures Location Inspection

1 Metal, metal Radiographic testing MM 11100 (E) Rid , Bev, Hen,

constructions and plastics

in accordance with ASME V Hee, Din, Ein

2 MM 11400 (E)

Rid, Bev, Hen, Hee, Din, Ein

in accordance with ASTM E 186 en 446

3 MM 11700 E

Rid , Bev, Hen,

in accordance with ASME B31 .3 Hee, Din, Ein

4 MM 11900 (E)


in accordance with ASME B 16.34

5 MM 13100 (E)


in accordance with ANSI AWS D1-1

6 MM 14101 (E)

Rid , Bev, Hen, Hee, Din, Ein

in accordance with Merkbliitter 2000 HP 5/3

7 MM 15100 (E)

Rid, Bev, Hen,

in accordance with Regels voor toestellen Hee, Din, Ein

onder druk T011 0, T0111, T0201

8 MM 17100 (E)


in accordance with PD 5500

9 MM18100(E)


in accordance with EN-ISO 17636(EN 1435)

10 MM 18900

Rid, Bev, Hen,

in accordance with EN 16407-1, EN 16407-2 Hee, Din, Ein

11 MM 19800

Rid, Bev, Hen,

in accordance with SEP 1914/1916 + Hee, Din, Ein

API spec.5L

12 Plastics Radiographic Testing MM19103E

Rid, Bev, Hen,

in accordance with ASME V, ASTM E1025 Hee, Din, Ein






13 Plastics Radiographic Testing MM19110

Rid, Bev, Hen,

in accordance with EN-ISO 17636, Hee, Din, Ein

NEN 7200

14 Ferro magnetic objects Magnetic Particle Testing MM 21000 (E) Rid, Bev, Hen, Hee, Din, Ein

and constructions in accordance with ASME V

15 MM 21700 E

Rid , Bev, Hen,

in accordance with ASME 831 .3 Hee, Din, Ein

16 MM 21900 (E)


in accordance with ASME 816.34

17 MM 23100 (E)


in accordance with ANSI

AWS D1-1

18 MM 24101 (E) Rid, Bev, Hen, Hee, Din, Ein

in accordance with AD Merkblatter 2000 HP

5/3

19 MM 25100 (E)


in accordance with Regels voor toestellen

onderdrukT0110, T0203


in accordance with PD 5500


in accordance with EN-ISO 17638

22 MM 28300 (E) Rid, Bev, Hen,

in accordance with EN 10228-1 Hee, Din, Ein


in accordance with EN 1369






24 Metal, metal Dye Penetrant Testing MM 31000 (E) Rid, Bev, Hen,

constructions and plastics in accordance with ASME V Hee, Din, Ein

25 MM 31700 E

Rid, Bev, Hen,

in accordance with ASME 831.3 Hee, Din, Ein

26 MM 31900 (E)


in accordance with ASME 816.34

27 MM 33100 E

Rid, Bev, Hen,

in accordance with ANSI Hee, Din, Ein

AWS 01-1

28 MM 34101 (E)


in accordance with AD Merkbliitter 2000 HP

5/3

29 MM 35100 (E)


in accordance with Regels voor toestellen

onder druk T0110, T0203

30 MM 37100 (E)


in accordance with PO 5500

31 MM 38100 (E)

Rid, Bev, Hen,

in accordance with EN-1503452-1 Hee, Din, Ein

32 MM 38300 (E)


in accordance with EN 10228-2

33 MM 38400 (E)


in accordance with EN 1371-1

34 MM 39600 (E)

Rid, Bev, Hen,

in accordance with ISO 4386-3 Hee, Din, Ein






35 Metal , metal Ultrasonic Testing MM41100(E) Rid , Bev, Hen, Hee, Din, Ein

constructions and plastics in accordance with ASME V

36 MM 41200 (E)


in accordance with ASTM A435, A577, A578

37 MM41300(E)


in accordance with ASTM A388, ASTM A745,

ASME 81 6.34, ASME Code Case 2155 +

2156

38 MM 41400 (E)


in accordance with ASME VIII div. 1 + 2,

ASTM A609

39 MM 41500 (E)


in accordance with ASME V, RToD regels, EN

141 27

40 MM 41600

Rid, Bev, Hen,

in accordance with ASME VIII div. 2, ASTM A Hee, Din, Ein

578

41 MM 41700 E

Rid, Bev, Hen,

in accordance with ASME 831 .3 Hee, Din, Ein

42 MM 43100 E

Rid, Bev, Hen,

in accordance with ANSI/AWS D1-1 Hee, Din, Ein

43 MM 44100

Rid , Bev, Hen,

in accordance with AD Merkblatter 2000 HP Hee, Din, Ein

5/3

44 MM 45100 (E)

Rid, Bev, Hen,

in accordance with Regels voor toestellen Hee, Din, Ein

onder druk T011 0, T0117, T0202

45 MM 46200 (E)

Rid , Bev, Hen,

in accordance with SEL 072 Hee, Din, Ein






46 Metal, metal Ultrasonic Testing MM 46300 (E)

Rid , Bev, Hen, constructions and plastics

in accordance with SEP 1921 Hee, Din, Ein

47 MM 46400

Rid, Bev, Hen,

in accordance with SEP 1922 Hee, Din, Ein

48 MM 47100 (E)

Rid , Bev, Hen,

in accordance with PD 5500 Hee, Din, Ein

49 MM 48100 (E)

Rid, Bev, Hen,

in accordance with EN-ISO 17640 Hee, Din, Ein

50 MM 48200 (E)



51 MM 48250 (E)



52 MM 48290 E



53 MM 48300 (E)

Rid , Bev, Hen,

in accordance with EN 1 0228-3, EN 10228-4 Hee, Din, Ein

54 MM 48400 E

Rid, Bev, Hen,

in accordance with EN 12680 Hee, Din, Ein

55 MM 48900 (E)

Rid , Bev, Hen,

in accordance with EN-ISO 10863 Hee, Din, Ein

56 MM 49600 (E)


in accordance with ISO 4386

57 MM 49800 (E)


in accordance with SEP 1914 t/m 1919, API

5L, ASTM E 213


Annex to ISO/I EC 17020:2012 declaration of accreditation for registration number: I 019, type A




58 Metal, metal Eddy Current Testing MM 78100 (E)

Rid, Bev, Hen, constructions and plastics

in accordance with EN-18017643 Hee, Din, Ein

59 Metal, metal Hardness Testing with MM 59000 (E)


constructions portable equipment own method

60 Welds in metal Visual Testing MM 88100 (E)

Rid, Bev, Hen,

constructions in accordance with EN-18017637 Hee, Din, Ein


Documents

Materiaal Metingen Testgroep BV Afdeling N.D.O. · PDF fileISO 17020 I019 - Raad van Accreditatie - Type A inspection body, in a competent, consistent and independent way Keywords: