Embed Size (px)
Citation preview
MATACRYL® PARK DECK SYSTEMCoating and waterproofing systems for multi-storey and underground car parks.
MATACRYL® PDSHIGH PERFORMANCE PARK DECK SYSTEMS
Multi-storey and underground car parks are exposed to unusually high and diverse stresses. This applies in particular to stresses on the reinforced concrete structure.
Without sufficient protection, thermal, chemical and mechanical stresses can lead to considerable structural damage. Vehicles carry water and de-icing salt into the car park. Exhaust gasses also increase the CO2 burden.
Vehicle traffic on the concrete decks generates vibrations that may cause the formation of fine cracks in the structure. This makes it easy for harmful substances to penetrate and cause substantial damage to the concrete and the steel reinforcement.
Coating and waterproofing systems
for multi-storey and underground Car parks
appliCation areas █ Coatings and membranes for top decks █ Coatings and membranes for intermediate decks █ Ramps █ Walkways / stairs █ Coatings and membranes for underground car parks █ Systems with and without fabric reinforcement █ Road markings
MATACRYL® PDSHIGH PERFORMANCE PARK DECK SYSTEMS
our unique PUMA TECHNOLOGY Combines the properties of polyurethane (pur) and methyl methaCrylates (mmas).
█ Extreme weather immunity █ High tolerance to humidity during application. █ All layers resistant to rain after 1 hour,
irrespective of ambient temperature. █ Can be applied to many types of substrates,
including asphalt, concrete and metal. █ Application temperature range
from -10°C to + 35°C. █ Several layers can be applied on the same
day, depending on crew size and scheduling. █ Very short downtime for users and/
or owners, which considerably reduces costs.
… the unique low-temperature application characteristics of MMAs… the rapid setting and drying times of MMAs… the elasticity of PUR… the crack-bridging properties of PUR… the rapid curing of MMAs… the superior wear resistance of MMAs… the longevity of MMAs… the UV-resistance of MMAs… the ease of repair of MMAs
a variety of membrane and Coating systems offer a seleCtion of potential solutions.A large number of visual design options can also be implemented. Colour coding of different parking levels, markings for pedestrians and parking bays, colour differentiation of pedestrian paths, etc. can clarify designated usage and increase safety.
Bright decorative colours also enhance the sense of well-being of car park users.
solutions for details
MATACRYL® PDSHIGH PERFORMANCE PARK DECK SYSTEMS
MATACRYL® PDSHIGH PERFORMANCE PARK DECK SYSTEMS
In the case of intermediate decks, it is necessary to prevent water and chloride penetration into the structure.
Depending on the type of construction, a relatively rigid coating may be sufficient or additional crack bridging may be necessary.
Systems with or without a supplementary membrane layer, depending on requirements, are available.
The membrane layer can be formed with or without a nonwoven fabric inlay depending on operating circumstances.
Our MATACRYL® OS 8 Parking Deck System, which is tested in accordance with DIN EN 1504-2, is suitable as a rigid coating for intermediate decks.
Coatings and membranes for intermediate deCks
Coatings for rampsRamp coatings can be installed using either rigid systems or flexible membrane systems.
In the case of ramp renovation, the ramps must be blocked off which typically results in a high loss of use. These closure times are greatly reduced with the MMA and PUMA systems.
Depending on the size and the site conditions, ramps can be renovated in just one day and re-opened to traffic just two hours after completion.
top deCksExternal decks and other parking surfaces exposed to the weather need solutions with specific technical properties.In particular, water and chloride penetration into the concrete of exposed decks must be prevented by suitable coating systems.
Crack bridging, UV-resistance, total impermeability to water and resistance to freeze/thaw cycles must also be assured on a longterm basis.
Our unique PUMA Technology perfectly fulfils all of these requirements. All systems also feature rapid curing.
speCifiC solutions for all requirements
MATACRYL® PDSHIGH PERFORMANCE PARK DECK SYSTEMS
MATACRYL® PDSHIGH PERFORMANCE PARK DECK SYSTEMS
intermediate deCks external deCks
1. Primer2. Broadcast wearing layer3. Topcoat
1. Primer2. Waterproofing membrane3. Broadcasted wearing layer4. Topcoat
1 1
22
33
4
RPM/Belgium N.V.Industriepark NoordH. Dunantstraat 11B · B-8700 TieltT +32 (0) 51 40 38 [email protected]
Alteco Technik GmbHRaiffeisenstraße 16D-27239 TwistringenT +49 (0) 42 43 92 95 [email protected]
Hermeta GmbHKanalstraße 11D-12357 BerlinT +49 (0) 30 661 70 [email protected]
No part of this brochure may be copied without written authorisation of RPM/Belgium N.V. - © RPM/Belgium N.V.
WarrantyThe RPM Belgium group warrants all goods to be free from defects and will replace materials proven to be defective. This brochure is not intended to establish product recommendations for any installation. To the best of our knowledge the information contained herein is true and accurate at the time of issue, but is subject to change without prior notice. It is the buyer’s responsibility to determine the suitability of the products in individual cases by conducting own tests.
RPM/Belgium N.V., Alteco Technik gmbH and Hermeta gmbH are subsidiaries of RPM International Inc., USA, a public owned American company and are Leading Manufacturers of Industrial Flooring Systems, Coatings, Sealants and Membranes. RPM/Belgium N.V. and Alteco Technik gmbH are certified by Lloyd’s to the ISO 9001 quality standard.
www.rpmbelgiumgroup.com
› CUSTOMER SUPPORT AND QUALITY
Products from the RPM Belgium group are based on many years
of experience.
Continual product research and development and application
testing combined with many successful installations by companies
with experienced and trained staff, ensure professional execution.
ISO 9001:2008 certification and many European and worldwide
approvals guarantee that our products fulfil stringent quality
standards.
Our sales team and our technical customer support staff are
always ready to advise and assist you.
TEST REPORTSKIWA POLYMER INSTITUT GMBH
OS 8 – DIN EN 1504-2
© RPM/Belgium N.V. - 09/2012
Authorized applicator:
Products from the RPM Belgium Group are based on many years of experience.
Continual product research and development and application testing combined with many successful installations by companies with experienced and trained staff, ensure professional execution.
ISO 9001:2008 certification and many European and worldwide approvals guarantee that our products fulfil stringent quality standards. Our sales team and our technical customer support staff are always ready to advise and assist you.
Customer support and quality
system build-up
rpm belgium n.v.H. Dunantstraat 11B • B-8700 Tielt • T.: +32 (0) 51 40 38 01
alteco technik gmbhRaiffeisenstraβe 16 • D-27239 Twistringen • T.: +49 (0) 42 43 92 95 0
hermeta gmbhKanalstraβe 11 • D-12357 Berlin • T.: +49 (0) 30 661 70 72
monile france sarl10, rue de la Lande • F-35430 St. Jouan des Guerets • T.: +33 (0) 608 86 96 56
alteco polymer systems901 North Newkirk Street • MD 21205 Baltimore • T.: +1 (0) 484 809 4795
vandex international ltdRötistrasse 6 • CH-4501 Solothurn • T.: +41 (0) 32 626 36 36
vandex isoliermittel gmbhIndustriestraβe 19-23 • D-21493 Schwarzenbek • T.: +49 (0) 41 51 89 15 0
vandex agRötistrasse 6 • CH-4501 Solothurn • T.: +41 (0) 32 626 36 37
worldwide referenCes
This brochure is not intended to establish product recommendations for any installation. To the best of our knowledge the information contained herein is true and accurate at the time of issue, but is subject to change without prior notice. No part of this brochure may be copied without written authorisation of RPM/Belgium N.V. - © RPM/Belgium N.V.
warrantyRPM/Belgium N.V. and Alteco Technik GmbH warrant all goods to be free from defects and will replace materials proven to be defective. The given information corresponds to our present standard of knowledge. However, it is the buyer’s responsibility to determine the suitability of the products in individual cases by conducting own tests.
RPM/Belgium N.V. and Alteco Technik GmbH are subsidiaries of RPM Inc., USA, a public owned American company. RPM/Belgium N.V. and Alteco Technik GmbH are leading manufacturers of industrial flooring systems, coatings, sealants and membranes. RPM/Belgium N.V. and Alteco Technik GmbH are certified by Lloyd’s as ISO 9001 companies and all products are controlled according to the ISO 9001 quality standard.
authorised appliCator:
