Master Tools

275Call Toll Free in the U.S. & Canada 800-932-8371 (800-WEAVER-1)

Master Tools Machinery & Equipment

Exclusive

Master Tools Leather SplitterThis leather splitter will split almost any thickness of leather down to your desired thickness with ease. With a convenient hand crank design, this splitter has an 8" hollow ground blade for precise, even splitting. Features an adjustment lever to accommodate almost any leather thickness (3 oz. - 14 oz.). Roller bearings provide long life and dependability. Ready to mount on your workbench. Specially-designed by Weaver to provide you with years of dependable service. Instruction sheet and blade positioning device come with each machine. Hollow ground replacement blade available for your convenience. 65-3080 65-3081 Replacement Blade65-3082 Replacement Gauge

See our full line of Master Tools on pages 231 - 237.

Satisfaction Guaranteed We are deeply commited to the excellence of our work and the quality of our service and will go to great lenghts to keep you a happy, satisfied Weaver customer. At Weaver, we’re not satisfied unless you are. For this reason, Weaver provides both a warranty and a hassle free returns policy.

Over 30 years of manufacturing experience went into our line of Master Tools machinery. Designed with the professional leatherworker in mind, these machines offer superb performance at great pric-es. You’ll find our line of Master Tools machinery provides some of the best values you’ll find on the market today.

Each machine is designed to save you both time and money. We have personally used these machines and have utilized input from customers to make these machines meet and exceed your expectations. We encourage your feedback and suggestions. These American-made machines are con-structed by Weaver Leather and local craftspeople.

Jim WeaverSupply Sales Manager

Easy-to-use splitter features roller bearings for years of dependable service

Hollow ground blade for precise splitting

A Hard-to-FindItem

Easily splits leather to the thickness you want

Made in USA

b y W e a v e r

65-3082 Replacement Gauge 65-3081

Replacement Blade

276 www.weaverleather.com

®

®

®

®

Master Tools Machinery & EquipmentYou Can Interchange Three Rolls on One Machine!

Exclusive

Available in flat single edge and hard-to-find flat double edge and domed double edge styles!

Easily creases leather straps in a variety of widths and thicknesses (from 2/3 oz. to 18/20 oz.)

Flat Single Edge

Domed Double Edge

Flat Double Edge

65-3095 Top Roll, Flat Single Edge

65-3098Bottom Roll

65-3095 Shown with Flat Single Edge Roll Set

Master Tools Hand Operated ClickerAre you still cutting patterns by hand? If so, this hand operated clicker will save you a lot of time. You’ll also get professional results and products that you can sell at a higher profit margin. Just with your time savings alone, this clicker will pay for itself in a very short time Made in the USA by Weaver Leather, this clicker features a swivel-away clicker head that allows you to see where you’re setting the die and offers easier clicking. A 29" long handle gives you added leverage, making clicking easier. The knurled adjustment knob makes it easy to adjust machine for using 3/4" to 1-1/4" dies. An aluminum plate that’s attached to the head allows you to use double-edged dies. A large 3" cam increases your leverage. A great way to use up scrap leather for key fobs, coasters, spur straps and other small leather goods. Heavy-duty machine is reinforced at all stress points for years of dependable service. Features holes and mounting hardware for easy attachment to your workbench. Machine is shipped in two boxes because of shipping regulations, however, only minimal assembly is required. Clicker board measures 8-3/8" x 11-7/8". Replacement clicker board also available. Machine is 43" high (with handle extended), 15" wide and 10" deep. Machine weighs 100 lbs. Instruction sheet included. 65-3075 65-3076 Replacement Clicker Board, 8-3/8" x 11-7/8"

Swivel-away clicker head offers added visibilityMade in USA

Master Tools machinery is American-made by Weaver Leather and local craftspeople.

Master Tools Leather CreasersCreaser’s design allows you to interchange rolls, giving you the ability to get different creasing styles with one base model machine Easily creases leather straps in a variety of widths and thicknesses. Choose from three base model machines – flat single edge, flat double edge and domed double edge – and add extra rolls for added creasing versatility. The flat double edge is reminiscent of the creasing from older creasers and the domed double edge is ideal for belts and tack. Double edge styles allow you to sew in one crease and still have an additional crease showing. Crease straps 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4" and 2" wide that are 2/3 oz. to 18/20 oz. (approxi mately 1/16" to 3/8") thick. Gears are set in roller bearings to ensure trouble-free operation. Feature a pedal that lifts the top roller – great for starting a heavy strap. Adjustable spring pressure adjusts the amount of pressure on rolls for heavy or light creases. Ready to mount on your workbench. Made to our demanding specs to give you years of dependable service. Creaser with Rolls 65-3095 Flat Single Edge65-3096 Flat Double Edge65-3097 Domed Double EdgeReplacement Rolls, Top and Bottom, Sold in Sets 65-3095-R Flat Single Edge65-3096-R Flat Double Edge65-3097-R Domed Double EdgeReplacement Top Rolls Only 65-3095-T Flat Single Edge65-3096-T Flat Double EdgeReplacement Bottom Rolls Only 65-3098 Flat Single Edge and Flat Double Edge, This Roll Works for Both

Perfect for making small leather goods out of scrap leather

Weaver is your source for quality, custom-made pre-

sharpened steel clicker dies. Call our die maker, Steve Sindlinger, at

800-932-8371, ext. 236 for a custom quote.

Made in USA

b y W e a v e r

b y W e a v e r

Buy this clicker and get $50.00 off your next order of clicker

dies. Simply ask our die shop personnel for your discount when placing your order.

The 29" long handle provides extra leverage

277

Master Tools Machinery & EquipmentMaster Tools Hand Operated Strap CutterPerfect for smaller cutting projects, this hand operated strap cutter will save you a tremendous amount of time. It cuts practically any type of leather with ease and will give all your straps, from belt blanks to strap goods, a uniform, professional look. With the time you save on each project, this machine will pay for itself in no time! Designed and manufactured in the USA by Weaver Leather, this 8" strap cutter features a table and roll that adjust together. The handle on this hand operated machine can be mounted in two

positions – one for higher torque, lower speed applications and one for lower torque, higher speed applications.

Thoughtfully-designed for easy access and maintenance. Designed with roller bearings to ensure trouble-free operation. Machine can be portable or mounted to a workbench. Ends remove easily for quick change of blades and spacers. Features holes and mounting hardware for easy attachment to your workbench. This machine has the capability to cut 1/8" laces with the use of the 1/16" spacers between the blades. Comes set up for 1" straps with eight 1" spacers and eight blades. Easily cuts through any kind of leather. This efficient machine is an economical alternative to cutting by hand. Replacement bottom roll and additional spacers and blades sold separately. Blades feature an overall depth of 2.75" and an inside depth of 1.395". They are the same blades that are used on the R-12. Instruction sheet included. 65-3085 65-3086 Replacement Plastic Bottom Roll 65-3087 Spacers, 1/16", 1/4", 1/2", 5/8", 3/4" or 1"* 65-3088 Blades*1/16" measures 1/16" even, the rest are 1/16" under size so you get the proper measurement after the addition of the blades.

Blades and spacers change quickly and easily

Fax Toll Free in the U.S. & Canada 800-693-2837 (800-6-WEAVER)

Master Tools Power Edge SlickerIf you’re tired of the tedious task of smoothing edges by hand, try our Master Tools Power Edge Slicker. This machine will smooth the edges on your strap goods to that hand rubbed finish you desire in a fraction of the time spent doing it by hand. Conveniently designed to be mounted on the edge of your workbench, this machine has a 45 degree angled arm for the rolls so they come out past your bench for easier use. Gives a smooth finish on all sides of leather straps. Motorized machine features a wooden roller, a sanding

roller, a belt guard, an on/off switch and a base that can be mounted to a workbench.

The shaft is 3/4" wide with a 19" overall length. Wooden roller is great for final touches and can be used dry. Sanding roller is 4-1/2" wide and ideal for sanding applications. The Cordura® roller and the sanding sleeve are interchangeable. Replacement rollers available.65-6025 65-6026 Replacement Cordura® Roller65-6027 Replacement Wooden Roller65-6030 Replacement Rubber Roll with Sanding Sleeve65-6031 Replacement Sanding Sleeve

We’re your belt manufacturing headquarters with a large variety of shoulders and double

bends in a great selection of weights and colors. See pages 33-37 for details.

The Cordura® Roller and the

Sanding Sleeve are Interchangeable

Made in USA

Designed with roller bearings for trouble-free operation

Hand operated design is ideal for smaller projects

Made in USA

Get that hand rubbed look in a fraction of the time with this power edge slicker

Mounts to the edge of your bench for easy access

b y W e a v e r

b y W e a v e r

Machinery Demonstrations Whenever You Want!Our Machinery Demonstrations DVD gives you a look at some of our

most popular machines and their capabilities. Featuring over two hours of demonstrations including the made in the USA Master Tools Nylon Hot Cutter, Hand Operated Clicker, Hand Operated Strap Cutter,

plus many more! See page 272 for more information.


®

®

®

®

Master Tools Machinery & Equipment

Shown with Cutting Blade Heating Block

Shown with 5-Hole Tube Punch Heating Block

Shown with Cutting Blade, Poly Rope End Sealer Heating Block and Cooling Block

Master Tools Nylon Hot CutterEasily and effortlessly cut or punch nylon, polyester and polypropylene with this handy machine Base unit comes with catch tray and self-centering guide. The holder can be adjusted at any angle to align cutter blade, giving you miter capability. Uses 110 volts of electricity. Always unplug cord when not in use. Electrical coupler located on the variable heat control allows you to quickly and easily plug the cutting, hole punch and poly rope sealer attachments in and out. Features a catch tray that neatly catches the slugs to keep your work area clean and tidy. Cuts and seals the webbing in one easy step. An easy-to-remove self-centering guide makes it easy to center the webbing. Blocks for cutting, hole punching and poly rope end sealer sold separately. Round tubes in two sizes sold separately. The cutting surface is protected with Teflon® tape. Additional Teflon®

tape is sold in 5 yard rolls. Instruction manual included.65-6905 Base Unit65-6906 Replacement Variable Heat Control Box with Cord65-6910 Cutting Blade Heating Block65-6911 5-Hole Tube Punch Heating Block (Spaced 1" Apart)65-6912 Round Tubes, 3/16" or 1/4"65-6913 Poly Rope End Sealer Block and Cooling Block65-6915 Teflon® Tape, 5 Yard Roll

Actual Size of Round Tubes

3⁄16" 1⁄4"

4" Cutting Blade Heating Block – 500 Watt

5-Hole Tube Punch Heating Block – 750 Watt

Teflon® Tape

Easily Cuts Straight or Angled Edges

2 Tube Sizes Available, Sold Separately

Cut and Seal Poly Ropes with One Machine

Base Unit with Self Centering Guide and Catch Tray

Heating block holder swivels for your convenience

Made in USA

Poly Rope End Sealer Heating Block and Cooling Block – 125 Watt

Attachments plug in and

out easily for your convenience

Designed to attach to your workbench beside the base unit

Cooling Block

b y W e a v e r

233

Master Tools PunchesThese punches are designed to cut all kinds of leather and coated webbing. Always use a leather mallet or the Maul Master© on page 235 when striking these punches. To prevent damage to these punches, never use a steel hammer.

2"

1-3/4"

1-1/2"

1-1/4"

1-1/8"

1"

7/8"

3/4"

5/8"

1/2"

2"

1-3/4"

1-1/2"

1-1/4"

1-1/8"

1"

7/8"

3/4"

5/8"

1/2"

3/8"

2"

1-3/4"

1-1/2"

1-1/4"

1-1/8"

1"

7/8"

3/4"

5/8"

1/2"

3/8"

00078 3/8", 1/2", 5/8", 3/4"00078 7/8", 1", 1-1/8"00078 1-1/4", 1-1/2", 1-3/4", 2"Please specify size when ordering.Diagrams represent actual punch sizes.

Features 11 punches

Oblong Punches

00072 1/2", 5/8"00072 3/4"00072 7/8"00072 1"00072 1-1/8", 1-1/4"00072 1-1/2"00072 1-3/4"00072 2"Please specify size when ordering.Diagrams represent actual punch sizes.

00076 3/8", 1/2", 5/8", 3/4"00076 7/8", 1", 1-1/8"00076 1-1/4", 1-1/2", 1-3/4", 2"Please specify size when ordering.Diagrams represent actual punch sizes.

Features 10 punches

Features 11 punches

Master Tools Punch SetsBuy a complete set of oblong, round strap end or English point strap end punches and get a FREE display board! Each set includes one punch of each size – a complete listing

of sizes is above. FREE wood display board hooks over two nails on your bench. Basketweave stamped leather strap and wood ledge keep

punches in place. Display boards also available separately. Item numbers and pricing listed above.

Sharpened

and Ready-to-Use

Right Out of the Box

English Point Strap End Punches

Very Balanced!

Very Sharp!Large Flared Striking Surface

Punch Set with FREE Display Board

65-2561 Round Strap End Punch SetDisplay Board Only

65-2560 Round Strap End Punch Display Board


65-2562 English Point Strap End Punch SetDisplay Board Only

65-2560 English Point Strap End Punch Display Board


65-2556 Oblong Punch SetDisplay Board Only

65-2555 Oblong Punch Display Board

Round Strap End Punches

Hand-Forged,

One-Piece Construction

Made in USA

Shapes areconsistent on

every tool

Shapes areconsistent on

every tool

These oblong, round strap end and English point strap end punches are the only hand-forged, one-piece constructed leatherworking tools made in the United States. Hand-forged so their cutting edges stay sharper longer, these punches offer a lifetime of dependable service. Plus, each punch features a large flared striking surface to help you strike the punch squarely. Once you try these punches, you’ll settle for nothing less!

Look for the Weaver symbol that indicatesthe quality products we recommend anduse in our own manufacturing facility.



®

®

®

®

Master Tools Punches

Self-Centering Guide for PunchesDesigned for use with our Master Tools Belt and Oval Drive Punches above, this guide allows you to center holes and maintain a consistent space between holes This guide will accommodate straps 1/2" wide to 3" wide. Features a 7/16" hole and a 1/2" hole for different size punches. The 7/16" hole will accommodate Belt Punch sizes 2, 4 and 5. The 1/2" hole will accommodate Belt Punch sizes 6, 7, 8 and 9 and Oval Drive Punch sizes 5, 6, 7 and 8. Metal measuring rod makes it quick and easy to get equal

space between holes.

65-6185

53/16"

67/32"

71/4"

89/32"

95/16"

103/8"

00082 2, 4, 500082 6, 7, 800082 9, 10, 11, 12, 13Please specify size when ordering.Diagrams represent actual punch sizes.

Oval Drive Punches

00084 5, 6, 7, 800084 9, 10Please specify size when ordering.Diagrams represent actual punch sizes.


Weaver nameplate is positioned to help you line up oval perfectly!

Sizes 9 and 10 cannot be used with the Self-Centering Guide below.

Belt Punches

The belt and oval drive punches have handles that are welded directly above the punch for more strength and durability. Ready to use immediately, these punches feature hardened, sharpened and polished cutting edges and flattened striking surfaces.

137/16"

1213/32"

113/8"

105/16"

99/32"

81/4"

77/32"

63/16"

511/64"

45/32"

21/8"

Belt Punch SetIncludes belt punches in all 11 sizes listed above65-2565

Oval Drive Punch SetIncludes oval drive punches in all 6 sizes listed above65-2566

Exclusive

Punch Handle Size Diameter2, 4, 5 . . . . . . . . . . 7/16"6, 7, 8, 9 . . . . . . . . . 1/2"10, 11, 12, 13* . . . . 5/8"

Punch Handle Size Diameter5, 6, 7, 8 . . . . . . . . . 1/2"9, 10* . . . . . . . . . . . 5/8"

*Sizes 10, 11, 12 or 13 cannot be used with the Self-Centering Guide below.

*Sizes 9 or 10 cannot be used with the Self-Centering Guide below.

LOOKING FOR SOMETHING and not finding it?

Call us!800-WEAVER-1

235

Master Tools Punches

Availablein 1-1/4",

1-1/2", 1-3/4"and 2"

2"

1-3/4"

1-1/2"

1-1/4"

Concho CuttersSave money – cut your own conchos out of scrap leather with these quality concho cutters! Made of hardened steel with polished edges, these premium quality concho cutters have tapered inner and outer walls that clear easily and give you clean, precise cuts. Available in clicker or maul styles. We recommend using the Maul Master ©

with these concho cutters. Use of steel hammers may result in breakage.65-5000 Clicker Style, 1-1/4", 1-1/2", 1-3/4", 2"65-5001 Maul Style, 1-1/4", 1-1/2", 1-3/4", 2"Please specify size when ordering.Diagrams represent actual punch sizes.

Clicker Style

BESTSELLER!

BESTSELLER!

Maul Style

Master Tools Warranty

Warranty is valid only on tools that withstand

normal use, following all applicable instructions. The warranty does not

include normal maintenance such as resharpening.

Weaver Leather reserves the right to determine if a claim falls under

the warranty.

Trace PunchThis premium quality punch is designedto effortlessly cut slots in leather traces Handles are welded directly above the punch for added strength and durability. No sharpening needed - they’re ready-to- use immediately. Feature hardened, sharpened and polished cutting edges and a flattened striking surface.

00079 1-3/4"

Availablein 1-3/4"

These concho cutters feature handles that are welded directly above the punch for added strength and durability. No sharpening needed – they’re ready-to-use immediately! With hardened, sharpened and polished cutting edges and flattened striking surfaces, these concho cutters will give you a lifetime of dependable service.

Maul Master© Designed by legendary holstermaker, John Bianchi, the revolutionary Maul-Master is designed to improve productivity with less effort Special shock-absorbing, non-slip rubber grip handle and Poly-More© nylon compound striking surface will

greatly reduce stress and fatigue. Industrial grade. Unique design directs striking force to point of impact and neutralizes the shock effect absorbed by wrist, arm, neck, shoulder and elbow of user. Nicely balanced for superb handling. Reduced bouncing and skipping. Make uniform stamping and die cutting a breeze. Overall length for 1 lb. model is 7-1/2", for 22 oz. model is 8", for 2 lb. model is 8-1/2", for 3 lb. model is 9" and for 4-1/2 lb. model is 10".

65-2323 1 lb. (1-5/8" striking surface)65-2320 22 oz. (1-7/8" striking surface)65-2321 2 lb. (2" striking surface)65-2324 3 lb. (2-3/8" striking surface)65-2322 4-1/2 lb. (2-5/8" striking surface)

Replacement Faces65-2423 1 lb.65-2420 22 oz.65-2421 2 lb.65-2424 3 lb.65-2422 4-1/2 lb.

Recommended for use with our Master Tools Punches – use of steel hammers damage punches and voids the warranty.


We are deeply committed to the excellence of our work andthe quality of our service and will go to great lengths to

keep you a happy, satisfied customer. At Weaver, we're notsatisfied unless you are. For this reason, Weaver provides

both a Warranty and a Hassle Free Returns Policy.

Satisfaction Guaranteed

We are deeply committedto the excellence of our workand the quality of our serviceand will go to great lengths to

keep you a happy, satisfiedcustomer. At Weaver, we'renot satisfied unless you are.

For this reason, Weaverprovides both a Warranty and a Hassle Free Returns Policy.

SatisfactionGuaranteed

Call Toll Free in the U.S. & Canada 800-932-8371 (800-WEAVER-1)


®

®

®

®

Master Tools Knives

Swivel KnivesBest swivel knives on the market for the money! Solidbrassknivesfeaturea free-spinningbearingdesign.Availablewith3/8",1/2"or5/8" barreltofityourhandperfectly. Please specify size when ordering.Bladessoldseparatelybelow.65-2480 3/8",1/2",5/8"

Draw GaugeComfortable, handcrafted handle is balanced and angled so you can make cuts at any setting with ease, power and confidence!Cutsstrapsupto4"wide.Gaugeisclearlymarkedin 1/8"increments.Constructedofhardenedtoolsteel.Qualitysteelbladetakesandholds acuttingedgewell.Bladesarenotpresharpened.00070-R Right-Handed

00070-L Left-Handed

CSO51-B Replacement Blades

Round KnifeHand-forged steel knife will stay very sharp for long periodsComfortablehandle.Blademeasures4-7/8"frompointtopoint.00068

Swivel BladesHollow-ground, heat-treated tool steelblades hold their edges for a long timeHollowgroundforeasysharpeningand heat-treatedformaximumhardness.Straightandanglebladesavailablein avarietyofsizestomeetyourneeds. Please specify size when ordering.Straight

65-2490 1/4",3/8",1/2"Angle

65-2495 1/4",3/8"

This great knife was designed andmadetoourspecificationsbyourtalentedtoolmaker.Incraftingthisroundknife,weusedextrahighqualitysteeltoensureasharpedgeforlongperiodsoftime.Thissteelrunsthefulllengthofthetoolforoptimumstrength.Foraddedcomfort,we’vehandmadeaspecially-designed handlefrombeautifulhardwood.AnotherMasterToolexclusive! Tryoneforyourselfandfeelthedifference.

Extra smooth blade is so sharp you can cut for hours and never tire!

Cut All Day Long Effortlessly!

Made in USA

Easilyadjuststokeephandleproperlypositioned Ergonomichandle

twistsforeasywidthadjustment

Nice Balance

Polished,smoothsteelbladeeasilycutsthroughleather

Angledhandlekeepsdrawgaugeflushagainstleatherforprecisecuts!

Sharpened and Ready-to-Use

BESTSELLER!

BESTSELLER!

Thisroundknifecuts10/11oz.skirtingleatherwithease!

All Master Tools are

b y W e a v e r

Feels Great in Your Hand!

Exotic Wood Handle

Availableinrightorleft-handedstyle

Performsaswellasknivesthatarethreetimestheprice!

65-2490 65-2495

The best draw gauge on the market – hands down!

Tryitforyourselfandyou’llseeandfeelthedifference!

237

Tips are angled to cut clean on tight corners and turns

Master Tools Edgers

0 Bridle Leather 4-6 oz. Natural Strap

1 Bridle Leather 4-10 oz. Natural Strap

Latigo Leather

2 Harness Leather 8-12 oz. Skirting Leather

Latigo Leather 3 Harness Leather 12 oz.+ Skirting Leather

Size LeatherType Thickness IdealUses

Work that requires a very fine edge

Use on show tack with a very fine edge

Use on show tack liners & reins

Underside of tack for animal comfort

Edger Uses

EdgersAngledtipsforcleanedgingontightcornersandturns Wooden handles fit comfortably in hand for power when making long cuts and cutting heavy leather. Precision sharpened tips are ready-to-use. Sizes include 0 (1/32"), 1 (3/64"), 2 (1/16") and 3 (7/64"). Pleasespecify sizewhenordering.00080

French Edger UsesThese edgers are used to mitre fine corners, skive hard-to-reach areas and make grooves for cornering and folds. Ideal for saddle work and trimming.

French EdgersGauge,channelandskiveedgesquickly,easilyandprofessionally Wooden handles fit comfortably in hand for ease and power when making long cuts and

cutting heavy leather. Precision sharpened tips are ready-to-use. Sizes include 4 (1/4"), 6 (3/8") and 8 (1/2"). Pleasespecify sizewhenordering.00081 4, 6, 8

– 9 – Leather SlickersQuicklyandeasilyslicksleatheredges Available in an exotic wood or a plastic style, these slickers can be used by hand or chucked in a drill for power slicking. Exotic wood style features a natural oil that aids in slicking. Plastic style can be used with our Gum Tragacanth on page 227 for

beautiful, smoothed edges. Wood style weighs 2-1/4 oz. and measures 7" long; plastic style weighs 2-1/2 oz. and measures 7-1/4" long. Features grooves that accommodate 4-8 oz., 8-10 oz. or 10-14 oz. leather. Tapered design allows you to slick buckle tongue slots, flank billet slots, trigger cut-outs on holsters, saddle skirts, fenders and seat jockeys, belts,

straps and more.65-2961 Exotic Wood65-2962Plastic

Slicker design developed by a custom saddlemaker!

Weaver Strop BoardEasilysharpensedgerssoyoucanedgefasterandwithmoreprecision! Features narrow and wide leather strips on both sharpening and polishing sides to accommodate

different edger sizes. Use the narrow strips for size 2 edgers and smaller and the wide strips for size 3 edgers and larger. Wooden base measures 5-1/4" x 14" and features an acrylic plastic divider to keep sharpening and polishing strips separate. You’ll need one of each of the following: beeswax (adheres aluminum oxide to strip), aluminum oxide (sharpens the edger), and jeweler’s rouge

(polishes the edger). Full instructions come with each strop board.65-2935 Strop Board65-2936 Aluminum Oxide, 6 oz.65-2937 Jeweler’s Rouge, 4 oz.

50-1990 Beeswax, 1 oz.

KeepYourEdge!A must-have for all leatherworkers!

BESTSELLER!

BESTSELLER!


10 - 14 oz. leather

4 - 8 oz. leather8 - 10 oz. leather

Perfect for flank billet slots, trigger cut-out on holsters or any inside curves/corners

Designed for buckle tongue slots

These grooves are designed to slick edges of:

Ideal for skirts/fenders, seat jockeys, heavy belts/straps and holsters

SuggestedUsesforthe–9–Slicker

Polished, Sharpened Edges for the Most Precise Cuts!

Hardwoodmaplehand-turnedhandlesforaddedcomfortandextralongwear

Great for Sharpening and Polishing Edgers!

Check this out – Master Tools Edgers cut 10/11 oz. skirting leather bellies with ease and precision!

FantasticPrice!

SPEEDY SHIPPING!Most catalog orders ship

out within 24 hours.That’s Fast!

BESTSELLER!

BESTSELLER!

Wow! Great Deal!


Documents

Master Tools