Upload
ezra-taylor
View
220
Download
1
Tags:
Embed Size (px)
Citation preview
Master Keying
Virtually endless possibilitiesAll Products can be master keyedEasy design & planningSimple keying & pinningUser-friendly software
Get rid of the overloaded key ring, Replace it with a S I N G L E K E Y.
Master keying allows the customer to design which keys will or will not open which locks in the system.
Single Key Access
The variety of Mul-T-Lock products for use at home ,office, cars etc… can be Master keyed.
ONE KEY -
ENDLESS
“POSSIBILIT
IES””ONE KEY -
ENDLESS
“POSSIBILIT
IES””
The design methods
• The highest level is the Grand Master key (GM) which may open each cylinder in the system, Lowest levels are related to keys that may open only a single cylinder
•The Hierarchical method •The Matrix method
Using a Matrix chart, Each column represents a Cylinder and each row represents a Key
The customer, with the help of the locksmith, marks the cylinders that each key is allowed to open
Several levels of access authorization, higher levels are authorized to open lower levels
The Hierarchical Method
1 level below the General Master1 level below the General Master
GMGM||
4 MK4 MK||
2 differs2 differs
2 levels below the General Master2 levels below the General Master
GMGM||
7 differs7 differs
Entrance door - Common cylinderEntrance door - Common cylinder
ENTRANCEENTRANCEENTRANCEENTRANCE
Several possible solutions, The best one is to use two double sided key
The Hierarchical Method
X
Branch Common cylindersBranch Common cylinders
COMMONCOMMONCOMMONCOMMON COMMONCOMMONCOMMONCOMMON
• Supported in Tree mode• Recommended only for small systems
The Hierarchical method
We are using the following mechanical elements to create master keying:
• Master pins (disks)• Solid Plug pins• Side pins (not in MT5)• Master keying profile-set
Master Keying - How Does It Work?
Allowing more than one key combination to operate specific cylinders.
The “bottom line” of any Master-key system:
To do this:
The “Old” Concept
Toothed Key and pins – straight shear line
Key
Plug pins
Body pins
Shear linePlug
Body
The “Old” concept
Replacing plug pin with shorter pin and master pin disk
key
Plug pins
Body pins
Plug
Body
Master pin
Combination – None Mastered
It will be locked for any other
key combinations
Here- same cylinder is locked for ‘D5’ or other key combinations
Cylinder with ordinary pinning
is open by a single key
combinationHere- Cylinder with D3 pins is open for
‘D3’ key combination only!
3D
3D
Using Master Pins
Cylinder with master pins is
open by several key combinations
Here- same cylinder is open for
‘D5’ key combinations
2
Here- Cylinder with D3_2 pins
is open for ‘D3’ key combination
3D
2
3D
Conventions
A134
B32+
B31_
Internal master pin ‘4’
Internal plug pin ‘1’
External plug pin ‘A’
External master pin ‘3’
Internal plug pin ‘3’External plug pin ‘B’
External master pin ‘1’
Internal plug pin ‘3’
External plug pin ‘B’
Solid master pin ‘2’
Available master pins
Internal master pin 1 cancelled
GM Combinations PackageGM Combinations Package
MUL-T-LOCK provides special GM combination-card for each MUL-T-LOCK provides special GM combination-card for each Master Key systemMaster Key system..
Each Package contains 10 cards (for 10 systems) with 6 digits Each Package contains 10 cards (for 10 systems) with 6 digits number typed on each. An attached list refers a special GM number typed on each. An attached list refers a special GM combination for each card (system).combination for each card (system).
It is highly recommended to separate the master key products from the ordinary products by using different profilesWe recommend to use the left hand MKS profiles set
Security-convenience trade off
The new profiles set has a structure of 7 profiles open by one master key profile
Left Hand MKS Profiles
New master key-profile 99 replaces the existing master 11
Three new profiles: 33, 35, 37 are added
Solid Plug Pins
New revolution in master keying concept only available in telescopic pins tumblersWe took the “multiple shear line” away from the plug shear line and move it into the key side
12 pins divided into 3 different configurations
A-
B-
C-
D-
AA
BB
CC
DD
Z+
A+
B+
C+
ZZ Cancelled Y+ Cancelled Z- Cancelled
Solid Plug Pins
Pins that “ride” only on the external cut Pins are identified by letter and (-) sign A-, B-, C-, D-
EXAMPLE: Solid Plug Pin C- operated by C4, C3, C2 key cuts.
C2C3C4
C- C- C-
Shear line
D4 A1
Solid Plug Pins
Pins that “ride” on either the external cut, internal cut or both Pins are identified by double letters AA, BB, CC, DD
EXAMPLE: : Solid Plug Pin CC operated by C4 and C4 key cuts.
CC CC
C4 C3
Shear line
D4 C2 A1
Solid Plug Pins
Pins that “ride” only on the internal cut Pins are identified by letter double letter Z+, A+, B+, C+
EXAMPLE: Solid Plug Pin C+ operated by C4 and D4 key cuts.
C+ C+
C4D4 C3
Shear line
C2 A1
Solid Plug Pins - Advantages
1. Always External locking
2. Less parts inside cylinder - less probability for malfunctions
3. Easier to assembly
4. New combination possibilities
KC-5 to PC Interface
User-Friendly Interface
Easily Import Data from MASTERpiece™Engraving Option
Batch Design