Master Index - IBMpublib.boulder.ibm.com/tividd/td/opc/SH19-4375-02/... · 1 extended status code PSW:346 2 extended status code PSW:346 A A extended status code PSW:346, CMW:116

Tivoli Operations Planning and Control IBM

Master IndexVersion 2 Release 3

SH19-4375-02

Note

Before using this information and the product it supports, be sure to read the general information under “Notices” on page v.

ISO 9001 Certification

This product was developed using an ISO 9001 certified quality system.

Certification has been awarded by the Italian quality system certification group, CSQ (Certification No. CISQ/CSQ 9150.IBM7).

CSQ is a member of the mutually recognized organization of European assessors, ITQS, which assesses and certifies qualitysystems in the field of information technology enterprises.

Third Edition (December 1999)

This is a major revision of, and obsoletes, SH19-4375-01.

This edition applies to Version 2 Release 3 Modification Level 0 of Tivoli Operations Planning and Control, Program Number5697-OPC, and to all subsequent releases and modifications until otherwise indicated in new editions or technical newsletters.Technical changes or additions to the text to describe the Tivoli Job Scheduling Console Support are indicated by a vertical line tothe left of the change. Make sure you are using the correct edition for the level of the product.

Order publications through your IBM representative or the IBM branch office serving your locality. Publications are not stocked at theaddress below.

IBM welcomes your comments. A form for readers' comments appears at the back of this publication. If the form has beenremoved, address your comments to:

Tivoli OPC Information DevelopmentRome Tivoli LaboratoryIBM Italy S.p.A.Via Sciangai, 5300144 RomeItaly Fax Number (+39) 06 5966 2077 Internet ID: ROMERCF at VNET.IBM.COM

When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way it believesappropriate without incurring any obligation to you.

Copyright International Business Machines Corporation 1991, 1999. All rights reserved.Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject torestrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Contents

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vTrademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Master Index of Tivoli OPC Publications . . . . . . . . . . . . . . . . . . . . . . 1

Copyright IBM Corp. 1991, 1999 iii

iv Tivoli OPC Master Index

Notices

References in this publication to IBM products, programs, or services do not implythat IBM intends to make these available in all countries in which IBM operates.Any reference to an IBM product, program, or service is not intended to state orimply that only IBM’s product, program, or service may be used. Subject to IBM'svalid intellectual property or other legally protectable rights, any functionallyequivalent product, program, or service may be used instead of the IBM product,program, or service. The evaluation and verification of operation in conjunction withother products, except those expressly designated by IBM, is the user’sresponsibility.

IBM may have patents or pending patent applications covering subject matter inthis document. The furnishing of this document does not give you any license tothese patents. You can send license inquiries, in writing, to:

IBM Director of LicensingIBM CorporationNorth Castle DriveArmonk, NY 10504-1785U.S.A.

Licensees of this program who wish to have information about it for the purpose ofenabling: (i) the exchange of information between independently created programsand other programs (including this one) and (ii) the mutual use of the informationwhich has been exchanged, should contact:

IBM CorporationP.O. Box 121953039 CornwallisResearch Triangle Park, NC 27709-2195U.S.A.

Such information may be available, subject to appropriate terms and conditions,including in some cases, payment of a fee.

Copyright IBM Corp. 1991, 1999 v

TrademarksThe following terms are trademarks of Tivoli Systems or IBM Corporation in theUnited States or other countries or both:

In Denmark, Tivoli is a trademark licensed from Kjøbenhavns Sommer - Tivoli A/S

Microsoft, Windows, Windows NT, and the Windows logo are trademarks orregistered trademarks of Microsoft Corporation.

UNIX is a registered trademark in the United States and other countries licensedexclusively through X/Open Company Limited.

C-bus is a trademark of Corollary, Inc.

| Java and all Java-based trademarks or logos are trademarks of Sun Microsystems,Inc.

PC Direct is a trademark of Ziff Communications Company and is used by IBMCorporation under license.

ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks or registeredtrademarks of Intel Corporation in the United States and other countries.

Other company, product, and service names which may be denoted by a doubleasterisk (**), may be trademarks or service marks of others.

DEC Digital Equipment CorporationHewlett-Packard Hewlett-Packard Corp.HP-UX Hewlett-Packard Corp.Solaris Sun Microsystems, Inc.SPARC SPARC International, Inc.SPARCstation SPARC International, Inc.Sun Sun Microsystems, Inc.SunOS Sun Microsystems, Inc.VMS Digital Equipment Corporation

ACF/VTAM AIX AIX/6000AS/400 BookManager CICSDATABASE 2 DB2 DFSMS/MVSDFSMShsm DFSORT Extended Services for OS/2GDDM Hiperbatch HiperspaceIBM IBMLink IMSLoadLeveler MVS/DFP MVS/ESAMVS/SP MVS/XA NetViewOPC Operating System/2 OS/2OS/390 OS/400 Personal System/2PS/2 RACF RISC System/6000RS/6000 SAA Sysplex TimerSystems ApplicationArchitecture

Tivoli TME

TME 10 VM/ESA VTAMWorkplace Shell

vi Tivoli OPC Master Index

Preface

This book contains the Tivoli Operations Planning and Control (Tivoli OPC) masterindex. The master index consists of the combined indexes of the following TivoliOperations Planning and Control publications:

General Information, GH19-4372-02

Getting Started, SH19-4481-02

Installation Guide, SH19-4379-02

Customization and Tuning, SH19-4380-02

Planning and Scheduling the Workload, SH19-4376-02

Controlling and Monitoring the Workload, SH19-4377-02

Programming Interfaces, SH19-4378-02

Workload Monitor/2 User's Guide, SH19-4482-02

Tracker Agent for OS/400 Installation and Operation, SH19-4485-02

Tracker Agents for AIX, UNIX, VMS, and OS/390 Open Edition PlatformsInstallation and Operation, SH19-4484-02

Tracker Agents for OS/2 and Windows NT Platforms Installation and Operation,SH19-4483-02

Diagnosis Guide and Reference, LY19-6405-02

The entries in this index contain the following abbreviations that identify the book inwhich the entry can be found:

Abbr. Book

GI General Information

GS Getting Started

IG Installation Guide

CT Customization and Tuning

PSW Planning and Scheduling the Workload

CMW Controlling and Monitoring the Workload

PI Programming Interfaces

WMUG Workload Monitor/2 User's Guide

T4 Tracker Agent for OS/400 Installation and Operation

UX Tracker Agents for AIX, UNIX, VMS, and OS/390 Open EditionPlatforms Installation and Operation

OW Tracker Agents for OS/2 and Windows NT Platforms Installation andOperation

DGR Diagnosis Guide and Reference

Copyright IBM Corp. 1991, 1999 vii

viii Tivoli OPC Master Index

Master Index of Tivoli OPC Publications

Special Characters? (question mark) variables PSW:279* (asterisk) global search character PSW:307* (asterisk) operation status code PSW:345, CMW:115* (asterisk) Ready, status for operations WMUG:40* (asterisk) use in generic search arguments CMW:16*, use in generic search arguments GS:9& (ampersand) variables PSW:277% (percent) global search character PSW:307% (percent) use in generic search arguments CMW:16% (percent) variables PSW:278%, use in generic search arguments GS:9= (equals) ISPF quick return command CMW:14=, ISPF quick return command GS:7

Numerics1 extended status code PSW:3462 extended status code PSW:346

AA extended status code PSW:346, CMW:116A operation status code PSW:345, CMW:115A4 (APPC tracker router) subtask DGR:43abend codes DGR:229

grouping together PSW:264ABEND keyword DGR:11ABENDU keyword DGR:12ACCEPT processing IG:160access authorization PI:114access code, IBM DGR:5ACCESS keyword of AUDIT CT:13access method

specifying for workstation PSW:39access to Tivoli OPC dialogs CT:125ACTION keyword PSW:139, PSW:147, PSW:153ACTIVATE parameter of SETROPTS, RACF CT:114activate/deactivate event (EXM) layout DGR:144activating

API (application programming interface) IG:96NCF IG:93server IG:100, IG:104subtasks IG:6

activating automatic recovery PSW:265activating event-triggered tracking (ETT) PSW:207,

PSW:268activating JCL variable substitution PSW:276activating job submission PSW:205active

application status PSW:78

actual quantity CMW:92actual start date and time WMUG:4actual workstation resource report in DP DGR:76AD (application description) database PSW:128,

DGR:28AD NOT FOUND ON AD FILE message PSW:181AD record

deleting PI:17format PI:171high date considerations PI:13inserting PI:26replacing PI:48selecting PI:54

AD segmentreplacing PI:49

AD/OI checkssetting options CMW:12

ADCOM segmentlisting PI:34record format PI:171selecting PI:54

ADD OCL instruction PI:130ADDEP PSW:152ADDEP batch-loader control statement PSW:152ADDEP segment

record format PI:175Adding an Application to the Current Plan

panel CMW:48Adding an Occurrence Group to the CP panel CMW:54adding and deleting operations CMW:62adding applications to the current plan GS:57Adding Applications to the Current Plan panel CMW:47adding dependencies CMW:51adding users to a group UX:12ADDPOP OCL instruction PI:131ADDPRED OCL instruction PI:133ADDR keyword of APPCROUT CT:9, T4:9ADDRES OCL instruction PI:136ADGROUPID keyword PSW:137ADID keyword PSW:137, PSW:155adjusted quantity CMW:92ADKEY segment

listing PI:34record format PI:172

administrator user ID UX:12ADOP batch-loader control statement PSW:145ADOP segment

record format PI:174ADOPPWTO keyword PSW:149ADR (application description) layout DGR:71ADRROUT PI:13

Copyright IBM Corp. 1991, 1999 1

ADRULE batch-loader control statement PSW:141ADRUN batch-loader control statement PSW:138ADRUN segment

ADRVALT field PI:13record format PI:172

ADSR batch-loader control statement PSW:132,PSW:150

ADSR segmentrecord format PI:175

ADSTART batch-loader control statement PSW:136ADTYPE keyword PSW:137ADVALFROM keyword PSW:137advanced program-to-program communication

(APPC) GI:27, PI:63, DGR:27, DGR:41AEC keyword PSW:147AIX

sample tracker CT:314AIX requirements, hardware and software UX:111AIX/6000

software requirements for controlled system GI:51,IG:201

AIX/6000 workloadmanaging GI:11

alert messageOperation List object

saving WMUG:56Plan object WMUG:16

alert when deadline passes PSW:105alerts

general description WMUG:5monitoring WMUG:51NetView generic alert vectors CT:299Operations List object WMUG:52

receiving WMUG:55selecting statuses WMUG:52stopping WMUG:55

Plan object WMUG:11receiving WMUG:15specifying settings WMUG:14specifying several WMUG:17

threshold WMUG:14ALERTS initialization statement CT:6

example of CT:8GENALERT keyword CT:6MLOG keyword CT:7RECEIVERID keyword CT:7WTO keyword CT:7

Alerts pageOperations List object WMUG:52Plan object WMUG:14

alerts, passing to NetView GI:24all dependencies of an operation GS:49All Dependencies of an Operation panel CMW:40All Open Time Intervals panel PSW:35all workstations closed PSW:394

all-days cyclic periods PSW:62allocated special resources CMW:95allocation status of special resources GS:20, PSW:50ALPHA value in variable validation PSW:290altering dependencies CMW:61altering resources CMW:97alternate current plan (CP2) DGR:29alternate current plan dataset (EQQCP2DS) PSW:199,

DGR:29alternate workstations PSW:24, CMW:68, WMUG:2

automatic recovery PSW:246automatic rerouting to PSW:103recovery with catalog management PSW:240

AMOUNT keyword of AUDIT CT:13ampersand (&) variables PSW:277AOC/MVS PSW:53APAR (authorized program analysis report) DGR:7

closing DGR:9collecting documentation for DGR:7mailing DGR:8, DGR:9process DGR:7tape function PSW:207

API (application programming interface) GI:27,PI:63—79, DGR:41

activating support for IG:59, IG:96APPC PI:63application transaction program (ATP) PI:63buffer layouts PI:65

APP section PI:66APPDAT section PI:72APPFLD section PI:72APPOBJ section PI:68APPSEL section PI:70APPVAL section PI:71

communication, establishing PI:63CPI-C verbs PI:64

CMACCP PI:64CMALLC PI:64CMCFMD PI:64CMINIT PI:64CMRCV PI:64CMSED PI:64CMSERR PI:64CMSLD PI:64CMSTPN PI:65

EBCDIC to ASCII code conversion PI:64objects PI:73

BACKUP_EVENT fields PI:219CP_OPEN_INTERVAL fields PI:214CP_OPER_EVENT fields PI:215CP_OPERATION fields PI:207CP_OPINFO_EVENT fields PI:217CP_RESOURCE fields PI:211CP_SR_EVENT fields PI:218CP_STATUS fields PI:206CP_WORK_STATION fields PI:212CP_WS_EVENT fields PI:220

2 Tivoli OPC Master Index

API (application programming interface) (continued)objects (continued)

selecting instances PI:74selection field types PI:75

partner transaction program PI:64reason codes PI:76return codes PI:76samples PI:222security CT:116, PI:78

APPC/MVS and RACF CT:116Tivoli OPC and RACF CT:117

selection criteria, specifying PI:75send/receive buffer formats PI:65transaction program (TP) names PI:63, PI:65, PI:78

APP (fixed section)description PI:66record format PI:66

APP buffer section, EQQUSINdescription CT:178record format CT:178

APPCcontrolling access from CT:116

APPC (advanced program-to-programcommunication) GI:27, PI:63, DGR:27, DGR:41

APPC controller description, creating T4:27APPC device description, verifying T4:37APPC keyword of ROUTOPTS CT:89, T4:8APPC line description, displaying T4:26APPC tracker router (A4) subtask DGR:43APPC/MVS

options, updating in SYS1.PARMLIB IG:59, IG:99,IG:103, T4:14

APPC/MVS (PP) subtask DGR:41APPCPMnn member of SYS1.PARMLIB IG:59, IG:99,

IG:103APPCROUT initialization statement CT:9, T4:9

ADDR keyword CT:9, T4:9example of CT:9WORKSTATIONS keyword CT:9, T4:9

APPCTASK keyword of OPCOPTS CT:72APPDAT (data section)

description PI:72record format PI:72

APPDAT buffer section, EQQUSINdescription CT:183record format CT:183updating objects

CP_OPER_EVENT CT:187CP_OPINFO_EVENT CT:189CP_SR_EVENT CT:188CP_WS_EVENT CT:189

APPFLD (field section)description PI:72record format PI:72

APPFLD buffer section, EQQUSINdescription CT:182

APPFLD buffer section, EQQUSIN (continued)record format CT:182updating objects

CP_OPER_EVENT CT:187CP_OPINFO_EVENT CT:189CP_SR_EVENT CT:188CP_WS_EVENT CT:189

APPLresource class IG:63statements

API (application programming interface) IG:97local LU for the server, defining IG:101local LU, defining IG:97NCF IG:93, IG:95

APPL statementsdefining local LU T4:13defining SNA resources T4:12

applicationbatch loading of GI:44definition of GI:12

application description WMUG:3dataset (EQQADDS) recovery CT:237feedback algorithms CT:55feedback exit (EQQUX003) CT:144

application description (ADR) layout DGR:71application description database DGR:28

input to current plan PSW:187application description dataset (EQQADDS) IG:68

considerations when allocating IG:71Application Description dialog PSW:73application groups

adding to the current plan CMW:46guidelines PSW:72specifying PSW:75

application node definitions, NCF IG:93application programmer GI:36application programming interface (API) GI:27,

PI:63—79, DGR:41activating support for IG:59, IG:96APPC PI:63application transaction program (ATP) PI:63buffer layouts PI:65


communication, establishing PI:63CPI-C verbs PI:64

CMACCP PI:64CMALLC PI:64CMCFMD PI:64CMINIT PI:64CMRCV PI:64CMSED PI:64CMSERR PI:64

Master Index of Tivoli OPC Publications 3

application programming interface (API) (continued)CPI-C verbs (continued)

CMSLD PI:64CMSTPN PI:65

EBCDIC to ASCII code conversion PI:64objects PI:73

BACKUP_EVENT fields PI:219CP_OPEN_INTERVAL fields PI:214CP_OPER_EVENT fields PI:215CP_OPERATION fields PI:207CP_OPINFO_EVENT fields PI:217CP_RESOURCE fields PI:211CP_SR_EVENT fields PI:218CP_STATUS fields PI:206CP_WORK_STATION fields PI:212CP_WS_EVENT fields PI:220selecting instances PI:74selection field types PI:75

partner transaction program PI:64reason codes PI:76return codes PI:76samples PI:222security CT:116, PI:78

APPC/MVS and RACF CT:116Tivoli OPC and RACF CT:117

selection criteria, specifying PI:75send/receive buffer formats PI:65transaction program (TP) names PI:63, PI:65, PI:78

application transaction program (ATP) PI:63, DGR:41applications PSW:69—121

adding to the current plan GS:57, CMW:46application description GS:23

defining GS:24priority, specifying GS:24

common data PSW:397considerations PSW:69creating GS:24, PSW:13cross-reference list PSW:400cross-references of job names and active

applications PSW:395excluding CMW:55group definition GS:23ID PSW:71, PSW:77, WMUG:3in the long-term plan PSW:184internal operation logic report PSW:398JCL variable tables PSW:274job description GS:23mass update report PSW:402naming standards PSW:71operation data PSW:398operations GS:28operations using particular workstations

report PSW:399run cycles GS:26scheduling PSW:78specifying PSW:75

applications (continued)status GS:24, PSW:78types GS:23updating in batch PSW:123valid-from date GS:24, PSW:77valid-to date PSW:77

APPLID keyword of DBCSOPTS CT:25APPLY processing IG:160applying the fix DGR:9APPN configuration list

changing T4:25checking T4:24

APPOBJ (object section)description PI:68record format PI:68

APPOBJ buffer section, EQQUSINdescription CT:179record format CT:180specifying an object name CT:180

APPQ DGR:42APPSEL (selection section)

description PI:70record format PI:70

APPSEL buffer section, EQQUSINdescription CT:181record format CT:181selecting objects CT:183

BACKUP_EVENT CT:186CP_OPER_EVENT CT:183CP_OPINFO_EVENT CT:185CP_SR_EVENT CT:185CP_WS_EVENT CT:186

APPVAL (selection value section)description PI:71record format PI:71

APPVAL buffer section, EQQUSINdescription CT:182record format CT:182selecting objects


APRIL keyword PSW:143AR (automatic recovery) subtask DGR:44, DGR:47ARC row command PSW:262, CMW:85arithmetic operators (OCL) PI:122ARM keyword of OPCOPTS CT:72ARM keyword of SERVOPTS CT:94AROPTS initialization statement CT:10, PSW:206

AUTHUSER keyword CT:10, PSW:262ENDTIME keyword CT:10, PSW:252example of CT:12EXCLUDECC keyword CT:11EXCLUDERC keyword CT:11


AROPTS initialization statement (continued)PREDWS keyword CT:11, PSW:260STARTTIME keyword CT:11, PSW:252USERREQ keyword CT:11, PSW:262

ARPARM keyword of OPCOPTS CT:72arrival time

specifying GS:32, PSW:108Arriving, status for operation alerts WMUG:52Arriving, status for operations WMUG:40AS/400


AS/400 workloadmanaging GI:11, GI:39

ASCII PI:64associating variable tables with applications PSW:274asterisk (*) global search character PSW:307asterisk (*) operation status code PSW:345, CMW:115ATP (application transaction program) PI:63, DGR:41ATTR command CMW:17attributes

reporting, for workstations PSW:29AUDIT initialization statement CT:12

ACCESS keyword CT:13AMOUNT keyword CT:13example of CT:14FILE keyword CT:13

audit trail of failed jobs PSW:263audit trail of recovery actions PSW:263audit trails

report PSW:195audit-trail facility GI:34auditing

sample audit package CT:315statements relating to CT:102

AUGUST keyword PSW:143AUTHCMD statement, updating for Tivoli OPC TSO

commands IG:58AUTHDEF initialization statement CT:15

CLASS keyword CT:15example of CT:16LISTLOGGING keyword CT:16security PSW:262SUBRESOURCES keyword CT:16TRACE keyword CT:16

authority checking GI:34authority group ID PSW:76authority requirements T4:15, T4:32, T4:36authority to use dialogs CT:125authority, problem determination procedures IG:114authorization

and batch programs PSW:352authorized program analysis report (APAR) DGR:7

closing DGR:9collecting documentation for DGR:7mailing DGR:8

authorized program analysis report (APAR) (continued)process DGR:7tape function PSW:207

AUTHTSF statement, updating for EQQMINOR IG:57AUTHUSER keyword of AROPTS CT:10, PSW:262automatic

job submission GI:23, PSW:102reporting attribute PSW:31restart CMW:85status checking GI:26status reporting GI:27

automatic job and started-task recovery GI:24—26,PSW:243—266

activating PSW:206deactivating PSW:206examples PSW:20

automatic job recoveryexit CT:170statements relating to CT:105

automatic recoveryconsiderations PSW:223

automatic recovery (AR) subtask DGR:44, DGR:47automatic recovery case code list DGR:81automatic startup UX:62, OW:36automatic-recovery-procedure library

(EQQPRLIB) IG:73considerations when allocating IG:80

automation GI:4automation options PSW:101automation using ETT PSW:272availability GI:7, CMW:87

controlling with NetView PSW:53controlling with RODM PSW:53intervals CMW:92special resources PSW:41, PSW:331

and LOOKAHEAD PSW:53workstation PSW:34

Availability of a Workstation panel PSW:34avoiding loops in variable substitution PSW:311AWSCL record

deleting PI:18AWSCL segment

listing PI:34record format PI:176selecting PI:54

BB extended status code PSW:346backup and recovery of datasets CT:231—244BACKUP command IG:58, CT:52, CT:56

description PSW:318backup event (EXE) layout DGR:136backup event (EXH) layout DGR:139BACKUP keyword of JTOPTS CT:52, PSW:202,

PSW:318


backup system GI:25backup workstation PSW:24, PSW:246BACKUP_EVENT object

field names PI:219BACKUP_EVENT object, EQQUSIN CT:186backward references in JCL PSW:266batch command interface

description PI:83Batch Command Interface Tool

BUIT output PI:84description PI:83GROUPDEF support PI:107instructions

COPY PI:105COPY AD PI:105COPY JCLV PI:106COPY OI PI:106DELETE PI:99DELETE AD PI:99DELETE CPOC PI:99DELETE CPOP PI:100DELETE CPPRE PI:101DELETE CPSR PI:102DELETE JS PI:100DELETE JSCOM PI:100DELETE LTOC PI:102DELETE LTPRE PI:102DELETE OI PI:99description PI:85EXPORT PI:106IMPORT PI:106IMPORT AD PI:106IMPORT OI PI:107INSERT PI:95INSERT CPOC PI:96INSERT CPOP PI:96INSERT CPPRE PI:97INSERT CPSR PI:98INSERT LTOC PI:98INSERT LTPRE PI:98LIST PI:86LIST ADCOM PI:87LIST ADKEY PI:87LIST CLCOM PI:88LIST CPOC PI:88LIST CPOPCOM PI:88LIST CPWSCOM PI:89LIST JCLVCOM PI:89LIST JSCOM PI:89LIST LTOCCOM PI:89LIST OICOM PI:89LIST PRCOM PI:90LIST WSCOM PI:90LISTSTAT PI:94LISTSTAT CPOC PI:94LISTSTAT CPOPCOM PI:94MODIFY PI:103

Batch Command Interface Tool (continued)instructions (continued)

MODIFY CPOC PI:103MODIFY CPOP PI:103MODIFY LTOC PI:105REPLACE PI:107SELECT PI:90SELECT AD PI:91SELECT CL PI:91SELECT CPOC PI:91SELECT CPOP PI:92SELECT CPST PI:92SELECT CPWS PI:92SELECT JCLPREP PI:92SELECT JCLPREPA PI:93SELECT JCLV PI:93SELECT JS PI:93SELECT LTOC PI:93SELECT OI PI:93SELECT PR PI:94SELECT WS PI:94

options PI:86program example PI:84return codes PI:108

batch jobssecurity IG:61to update the LTP PSW:176user ID of Tivoli OPC submitted jobs IG:61

batch loader GI:44, PSW:73, PSW:127control statements PSW:129

syntax and construction PSW:133error messages PSW:159reasons for using PSW:123

batch programs CMW:20, DGR:32EQQADCOP PSW:354EQQADDEP PSW:355EQQADMUP PSW:356EQQADPRT PSW:357EQQADXRF PSW:359EQQAXR00 PSW:360EQQBATCH PSW:351EQQCLPRC PSW:361EQQCLPRP PSW:362EQQDNTOP PSW:363EQQDOTOP PSW:366EQQDRTOP PSW:368EQQDTTOP PSW:370EQQEVPGM PSW:372EQQJVPRT PSW:373EQQLTCRE PSW:374EQQLTMOA PSW:375EQQLTMOO PSW:377EQQLTPRT PSW:378EQQLTTRY PSW:380EQQOIBAT PSW:382EQQOIBLK PSW:383


batch programs (continued)EQQPURGE PSW:386EQQRCSIM PSW:389EQQWSPRT PSW:390EQQYLTOP PSW:390

batch-jobsgenerating skeleton JCL IG:45

BATCHOPT initialization statement CT:17CALENDAR keyword CT:17CHECKSUBSYS keyword CT:18CONTROLLERTOKEN keyword CT:18DATEFORM keyword CT:18DB2AVAIL keyword CT:18DB2SYSTEM keyword CT:19DPALG keyword CT:19DPROUT keyword CT:19DYNAMICADD keyword CT:19, PSW:54DYNAMICDEL keyword CT:20, PSW:54example of CT:24HDRS keyword CT:20LOGID keyword CT:20LTPDEPRES keyword CT:20MAXOCCNUM keyword CT:21NCPTROUT keyword CT:21OCPTROUT keyword CT:21OPERDALL keyword CT:21OPERHISTORY keyword CT:21OPERIALL keyword CT:22PAGESIZE keyword CT:22PLANHOUR keyword CT:22, PSW:193PREDWS keyword CT:22PREVRES keyword CT:22, PSW:193RETAINOPER keyword CT:22SUBSYS keyword CT:23SUCCWS keyword CT:23VALEACTION keyword CT:23

beep alert WMUG:15BEGIN JCL directive PSW:303benefits of GUI GI:6benefits of Tivoli OPC GI:1—9BIB block DGR:17BIT value in variable validation PSW:290blank, extended status code PSW:346, CMW:116boot startup UX:62, OW:36branching (OCL GOTO instruction) PI:125branching target (OCL LABEL instruction) PI:126broadcasting events CT:183—198, PI:75, PI:216browsing an occurrence GS:41browsing application occurrences GS:46browsing dependencies GS:41Browsing General Current Plan Information

panel CMW:42browsing most critical occurrences GS:50Browsing Most Critical Occurrences panel CMW:39browsing operation data GS:42

Browsing Operation Input/Output Streampanel CMW:80

Browsing Summary of Activities at a Workstationpanel CMW:41

browsing system information CMW:41, CMW:71browsing the job log CMW:77buffer layouts (API) PI:65


BUILDSSX keyword of OPCOPTS CT:72built-in functions (OCL) PI:123business processing cycle GI:18buttons, mouse settings WMUG:9

CC extended status code PSW:346, CMW:116C occurrence status code PSW:345, CMW:115C operation status code PSW:345, CMW:115C row command CMW:60, CMW:76C32 subdirectory WMUG:87

updating the CONFIG.SYS file WMUG:88calendar CMW:10

creating GS:18, PSW:10default in dialog GS:7defining PSW:59—62definition of GI:17extra PSW:62for variable substitution PSW:312free days GS:18general description GS:18general information report PSW:392period characteristics report PSW:393search order PSW:59specific dates report PSW:392specifying PSW:76status of days report PSW:392work days GS:18work-day end time GS:18, PSW:10

calendar and workstation dataset (EQQWSDS) IG:68calendar database DGR:28CALENDAR keyword PSW:137CALENDAR keyword of BATCHOPT CT:17CALENDAR keyword of INIT CT:39calendar layout DGR:77CALL OCL instruction PI:126CALLnn keyword of EXITS CT:36CAN error code PSW:347, CMW:117CANCEL command GS:5, PSW:25CANCEL command, MVS PSW:338, CMW:108case code list layout DGR:81


case code macro (EQQCASEC) DGR:44case codes PSW:264case-code-definition module (EQQCASEM) CT:11,

CT:226case-code-list definition macro (EQQCASEC) CT:11,

CT:226, CT:305CAT row command CMW:77CATACT keyword of OPCOPTS CT:73, PSW:237catalog management GI:25, PSW:235—242, CMW:77,

CMW:84considerations PSW:222delete datasets PSW:235ECSA (extended common service area), use

of IG:53keywords, used by

CATACT CT:73CATMCLAS CT:47CATMDISP CT:47CATMGT CT:73CHSMWAIT CT:48DESTID CT:90JOBLOGDEST CT:76JOBLOGRETRIEVAL CT:48MAXNUMUSYS CT:50STORELOG CT:78SYSID CT:91

on a Tivoli OPC tracker subsystem PSW:240pre-catalog-management exit (EQQUX008) CT:155rerunning occurrences CMW:58sample configurations, description IG:183, IG:186specifying for an operation PSW:102statements relating to CT:103status codes PSW:348, CMW:118uncatalog datasets PSW:235

catalog management (DC) subtask DGR:45catalog management event (EXC) layout DGR:133CATMCLAS keyword of JOBOPTS CT:47, PSW:221CATMDISP keyword of JOBOPTS CT:47CATMGT keyword of OPCOPTS CT:73CB (network communication function) subtask DGR:46,

DGR:56CCUN error code PSW:347, CMW:117CDATE, JCL variable PSW:283CDAY, JCL variable PSW:283CDD, JCL variable PSW:283CDDD, JCL variable PSW:283CDDMMYY, JCL variable PSW:283CDRSC statements

API IG:99NCF IG:93

CFREEDAY, JCL variable PSW:283change team DGR:4CHANGED MANUALLY (ONLINE) message PSW:181changing application descriptions in batch PSW:124changing color in graphic views WMUG:69

changing dependencies in the current plan CMW:61changing dependencies in the LTP PSW:185changing error-list layouts CMW:76changing fonts in graphic views WMUG:70changing group definitions PSW:124changing occurrences added to the current

plan CMW:56changing operation status PSW:40, WMUG:44changing operations in the current plan GS:59,

CMW:61changing operator instructions PSW:124changing resource availability CMW:66, CMW:93changing resources CMW:97changing startup options T4:34changing system values T4:36changing the current plan PSW:191, CMW:45, CMW:47changing the schedule PSW:173changing the scope of restart PSW:242changing views of Workstations List object WMUG:66changing workstation availability CMW:67changing workstation details CMW:68CHECK keyword PSW:135checking current plan status CMW:42checking dependencies GS:49, CMW:40checking if a job has failed PSW:227checking JCL variable substitution PSW:290checking occurrences GS:46, CMW:38checking operations GS:48, CMW:40checking the APPN configuration list T4:24checking the configuration parameter file UX:73checking the job name PSW:111checking workstation status CMW:41checklist for installing IG:26checkpoint dataset (EQQCKPT) IG:73, PSW:199,

DGR:29, DGR:57considerations when allocating IG:75error recovery PSW:253recovery CT:241

checkpoint file T4:47, UX:54, UX:72, UX:96, OW:24,OW:28, OW:64

CHECKSUBSYS keyword of BATCHOPT CT:18CHGJOB OCL instruction PI:145CHGNETA command T4:27CHGOPC command T4:34CHH, JCL variable PSW:283CHHMM, JCL variable PSW:283CHHMMSSX, JCL variable PSW:283CHKAPPL OCL instruction PI:128CHKCLASS keyword of JCCOPTS CT:44CHKDATE OCL instruction PI:156CHSMWAIT keyword of JOBOPTS CT:48, PSW:239CICS GI:3

tracking jobs submitted by PSW:269CINTERVAL keyword of DSTOPTS CT:26CL record

deleting PI:18


CL record (continued)format PI:177selecting PI:54

CL-job streams T4:53class descriptor table IG:63CLASS keyword of AUTHDEF CT:15class of service table IG:96CLCOM segment

listing PI:34record format PI:177selecting PI:54

cleaning up log files T4:48CLEAR command PSW:124clipboard, used to copy graphic views WMUG:73CLIST library IG:73, IG:87CLNPARM keyword of DSTOPTS CT:26CLNUPOPC command T4:47, T4:48closing down online systems PSW:113closing workstations PSW:36CLSD segment

record format PI:177CLWD segment

record format PI:178CMM, JCL variable PSW:283CMMYY, JCL variable PSW:283CODEPAGE keyword of ROUTOPTS CT:89, UX:9,

OW:6codepage tables UX:109codes PSW:345

catalog management PSW:348, CMW:118error PSW:347, CMW:117extended status codes PSW:346, CMW:116job log retrieval PSW:349, CMW:119status codes for occurrences PSW:345, CMW:115status codes for operations PSW:345, CMW:115

coding JCL variables PSW:276COFDLFnn member of SYS1.PARMLIB IG:59color and highlight attributes for panels CMW:10color, changing in graphic views WMUG:69command delimiter, specifying CMW:11command input streams T4:47commands

CANCEL GS:5CHGNETA T4:27CHGOPC T4:34CLNUPOPC T4:47, T4:48CPYFRMTAP T4:20CRTCTLAPPC T4:28CRTCTLHOST T4:27CRTDEVAPPC T4:25CRTMODD T4:28CRTPF T4:17, T4:20CRTSAVF T4:16CRTUSRPRF T4:30DLTF T4:22DLTLIB T4:39

commands (continued)DSPLIB T4:22DSPLIND T4:26DSPNETA T4:27DSPOBJAUT T4:36DSPSAVF T4:23ENDOPC T4:46LOCATE GS:11MVS IG:216

CANCEL PSW:338, CMW:108MODIFY PSW:338, CMW:108START PSW:337, CMW:107STOP PSW:337, CMW:107

RSTLIB T4:17, T4:19, T4:22SNDNETF T4:18, T4:21SORT GS:10STROPC T4:31STRSBS T4:45TSAVE GS:17TSO PSW:317

BACKUP IG:58event reporting CT:175OPINFO IG:58OPSTAT IG:58SRSTAT IG:58WSSTAT IG:58

utility OW:61WRKACTJOBS T4:49WRKCFGL T4:24WRKCFGSTS T4:49WRKDIR T4:16WRKJOBD T4:35WRKLIND T4:26WRKNETF T4:16, T4:18, T4:21WRKOPC T4:43WRKSYSVAL T4:36

commands, concatenating GS:7, CMW:13commands, ISPF in dialog CMW:14comments in LTP reports PSW:181COMMNDnn member of SYS1.PARMLIB IG:59Common Programming Interface for Communications

(CPI-C) GI:27, PI:63, PI:64, DGR:41common version and level requirement WMUG:83Communicating with Workstations menu CMW:21communication, checking WMUG:97communication, configuring WMUG:92communications

checking UX:19checking on OS/2 OW:12checking on Windows NT OW:15

Communications Manager password WMUG:100communications side information object T4:38COMP keyword on JCL directives PSW:307comparison operations (OCL) PI:121compatibility with OPC/ESA Release 3 GI:45


compatibility, software GI:54, IG:204COMPL OCL instruction PI:144COMPLETE status PSW:171Complete, status for operation alerts WMUG:52Complete, status for operations WMUG:40, WMUG:42completed applications

daily planning report PSW:193, PSW:415error statistics (daily planning report) PSW:416summary of, daily planning report PSW:414

completed/deleted application report record inDP DGR:78

completing an ended-in-error operation CMW:76completing an occurrence CMW:60completion codes PSW:225completion-only reporting attribute PSW:31compound variables PSW:278computer workstations WMUG:2

alternate PSW:23, PSW:24job statements PSW:110job type PSW:23, PSW:24started task (STC) type PSW:24using PSW:23

concatenating commands CMW:13concatenation operations (OCL) PI:121CONFIG.SYS file, updating WMUG:88configuration file

creating UX:48, OW:25configuration parameters

controller UX:9, OW:6configuration status

viewing T4:49configuration, statements relating to CT:100configurations GI:39

catalog management, description IG:183, IG:186connecting Tivoli OPC systems IG:12cross-system coupling facility (XCF) IG:13description IG:5event dataset IG:11examples

introduction IG:15, IG:167NCF connection IG:177, IG:179OPC/A Release 2 system IG:181, IG:185shared DASD connection IG:16, IG:168, IG:170single address space IG:20sysplex IG:173Tivoli OPC PLEX IG:175VTAM connection IG:17, IG:177, IG:179XCF connection IG:18, IG:173

MAS (Multi-Access Spool) restrictions IG:14Multi-Access Spool (MAS) restrictions IG:14NCF (network communication function) IG:13planning IG:11shared DASD IG:12VTAM IG:13workload restart

description IG:14examples IG:169, IG:171, IG:174, IG:178, IG:180,

IG:182, IG:186

configurations (continued)workstation destination IG:13XCF (cross-system coupling facility) IG:13

configuring for communication WMUG:92configuring for communication, common

mistakes WMUG:99Confirm Restart of an Operation panel CMW:77Confirm the Deletion of OI panel PSW:110confirming changes WMUG:48confirming rerun of an occurrence GS:64connected workstations CMW:87, CMW:99considerations for creating plans PSW:170console messages

routing CT:221console operator GI:36CONTENTIONTIME keyword of RESOPTS CT:81control option

for workstation fixed resources PSW:38control statements for batch loader PSW:129controlled AS/400 systems GI:11, GI:39controlled MVS systems

Tivoli OPC GI:39controlled shutdown PSW:36controlled systems

description IG:5software requirements GI:51, IG:201

controlled UNIX systems GI:11, GI:40controlled workstations GI:11, GI:40controller

case-code-definition module (EQQCASEM) CT:11,CT:226

checking the message log IG:112description IG:4, T4:1, UX:1, OW:1exits CT:135IBMOPC resource class IG:62introduction PSW:1loading national language support (NLS)

software IG:37loading software IG:36parameters UX:9, OW:6RACF IG:61, IG:62software requirements GI:49, IG:199started task datasets IG:83, IG:85tuning CT:289verifying installation IG:111

controller IP address parameter UX:52, OW:26controller port number parameter UX:52, OW:26controller subtasks DGR:38controller_ipaddr UX:52, OW:26controller_portnr UX:52, OW:26controller_type UX:52, OW:26CONTROLLERTOKEN keyword of BATCHOPT CT:18CONTROLLERTOKEN keyword of OPCOPTS CT:74controlling operations

special resourcesand LOOKAHEAD PSW:53


controlling systemdescription GI:39, IG:5recovery of GI:25

controlling workstations PSW:40conversion

from OPC/A GI:46from OPC/ESA Release 3 GI:46

copying graphic views WMUG:73copying objects WMUG:9COS table IG:96Country Settings WMUG:30COUPLEnn member of SYS1.PARMLIB IG:57CP (current plan) CMW:2

See also current planCP_OPEN_INTERVAL object

field names PI:214CP_OPER_EVENT object

field names PI:215CP_OPER_EVENT object, EQQUSIN CT:183, CT:187CP_OPERATION object

field names PI:207CP_OPINFO_EVENT object

field names PI:217CP_OPINFO_EVENT object, EQQUSIN CT:185,

CT:189CP_RESOURCE object

field names PI:211CP_SR_EVENT object

field names PI:218CP_SR_EVENT object, EQQUSIN CT:185, CT:188CP_STATUS object

field names PI:206CP_WORK_STATION object

field names PI:212CP_WS_EVENT object

field names PI:220CP_WS_EVENT object, EQQUSIN CT:186, CT:189CP1 (primary current plan) DGR:29CP2 (alternate current plan) DGR:29CPI-C (Common Programming Interface for

Communications) GI:27, PI:63, PI:64, DGR:41CPI-C information

updating T4:38CPICREXX command WMUG:97CPIVL

record format PI:188CPLREC01 (current plan record type 1) layout DGR:81CPLREC02 (current plan record type 2) layout DGR:83CPLREC04 (current plan record type 4) layout DGR:86CPLREC05 (current plan record type 5) layout DGR:89CPLREC06 (current plan record type 6) layout DGR:90CPLREC07 (current plan record type 7) layout DGR:91CPLREC08 (current plan record type 8) layout DGR:92CPLREC09 (current plan record type 9) layout DGR:93CPLREC10 (current plan record type 10)

layout DGR:95

CPLREC11 (current plan record type 11)layout DGR:95




CPLREC3C (current plan record type 3C)layout DGR:103

CPLREC3P (current plan record type 3P)layout DGR:106

CPOC recorddeleting PI:18format PI:178inserting PI:27listing PI:35modifying PI:39selecting PI:54

CPOP recorddeleting PI:18format PI:180inserting PI:27modifying PI:40selecting PI:55

CPOPCOM segmentlisting PI:35record format PI:180selecting PI:55

CPOPSRU segmentlisting PI:36record format PI:184

CPPRE segmentdeleting PI:18inserting PI:28record format PI:183

CPSR segmentdeleting PI:19inserting PI:28record format PI:184

CPST recordformat PI:185selecting PI:53

CPSUC segmentdeleting PI:18inserting PI:29record format PI:183

CPWS recordformat PI:186modifying PI:41selecting PI:55

CPWSCOM segmentlisting PI:36record format PI:186selecting PI:55


CPYFRMTAP command T4:20creating

administrator user ID UX:12directory UX:15group ID (GID) UX:12objects with templates WMUG:9Operations List object WMUG:22, WMUG:51Plan object WMUG:11user ID UX:12Workstations List object WMUG:60

Creating a Calendar panel PSW:60Creating a Calendar Period panel PSW:63Creating a Dependency in the Current Plan

panel CMW:53Creating a JCL Variable Table panel PSW:285Creating a Job panel PSW:118Creating a Ready List Layout panel CMW:24Creating a Special Resource panel PSW:49creating a user profile T4:30Creating an Application panel PSW:76Creating an Error List Layout panel CMW:75Creating an Operator Instruction panel PSW:109creating applications PSW:13, PSW:69, PSW:75creating calendars PSW:10, PSW:59creating dependencies GS:39, CMW:51creating error list layouts CMW:76Creating General Information about a Workstation

panel PSW:28creating intervals when resources are

available PSW:52creating job descriptions PSW:117, PSW:118creating occurrences GS:38creating operations PSW:92creating periods PSW:62creating plans PSW:19creating ready list layouts CMW:23creating resources dynamically PSW:53creating rules PSW:78creating run cycles PSW:78creating sample JCL IG:40creating special resources PSW:8, PSW:45creating temporary variables PSW:300creating the APPC controller description T4:27creating the current plan GS:43, DGR:29creating the long-term plan GS:35, GS:36, PSW:166,

DGR:31Creating the Long-Term Plan panel PSW:178creating the QEQQ Save file T4:16creating workstations PSW:5, PSW:23criteria for lists GS:8, CMW:15critical path CMW:39cross reference

application descriptions PSW:400job names and active applications PSW:395,

PSW:396

cross-domain resource definitionsAPI IG:99NCF IG:94

cross-system coupling facility (XCF) GI:24—26, GI:39,PSW:243

groups IG:91including IG:91initialization statements IG:92MVS initialization options IG:57run time options IG:92

CRTCTLAPPC command T4:28CRTCTLHOST command T4:27CRTDEVAPPC command T4:25CRTMODD command T4:28CRTPF command T4:17, T4:20CRTSAVF command T4:16CRTUSRPRF command T4:30CSI object T4:38CSR record

modifying PI:42selecting PI:55

CSR segmentselecting PI:55

CSRCOM recordselecting PI:55

CSRCOM segmentlisting PI:36selecting PI:55

CTIME, JCL variable PSW:283CTLLUNAM keyword of DSTOPTS CT:26CTLLUNAM keyword of FLOPTS CT:37CTLMEM keyword of DSTOPTS CT:26CTLMEM keyword of FLOPTS CT:37current plan GI:21, PSW:165, PSW:187—204, CMW:2

alerts WMUG:11alerts settings WMUG:14alternate (CP2) DGR:29analyzing problems PSW:196automatic backup process PSW:202backup record DGR:55catch up PSW:203changing GS:57, PSW:198, CMW:43checking occurrences GS:46, CMW:38checking status of WMUG:11—20creation date and time CMW:42description of DGR:29details WMUG:19end date and time CMW:42event-triggered tracking PSW:270execute (EX) function DGR:65extension (CX) DGR:29files currently in use CMW:42first logged event after last backup CMW:42general description GS:43, WMUG:1integrity PSW:199last backup CMW:42


current plan (continued)manual hold (MH) function DGR:64manual release (MR) function DGR:64NCP takeover PSW:203new (NCP) PSW:203, DGR:29, DGR:58new extension (NCX) DGR:29new plan in production CMW:42on-request BACKUP PSW:318on-request JSUACT PSW:320organization PSW:199primary (CP1) DGR:29receiving alerts WMUG:15record type 1 (CPLREC01) layout DGR:81record type 10 (CPLREC10) layout DGR:95record type 11 (CPLREC11) layout DGR:95record type 12 (CPLREC12) layout DGR:97record type 13 (CPLREC13) layout DGR:98record type 14 (CPLREC14) layout DGR:102record type 2 (CPLREC02) layout DGR:83record type 3C (CPLREC3C) layout DGR:103record type 3C (CPLREC3P) layout DGR:106record type 4 (CPLREC04) layout DGR:86record type 5 (CPLREC05) layout DGR:89record type 6 (CPLREC06) layout DGR:90record type 7 (CPLREC07) layout DGR:91record type 8 (CPLREC08) layout DGR:92record type 9 (CPLREC09) layout DGR:93recovery CT:232—236

from LTP CT:239from new current plan CT:240refresh function CT:239

recreating PSW:191replanning CMW:67reports PSW:193specifying several alerts WMUG:17statistics WMUG:18statistics settings WMUG:18status CMW:42trial PSW:192turnover PSW:203, DGR:29, DGR:57

current plan and status inquiry GS:45Current Plan and Status Inquiry menu PSW:198,

CMW:37current plan dataset (EQQCPnDS) IG:68

considerations when allocating IG:71current plan extension (CX) DGR:29current plan extension dataset (EQQCXDS) PSW:199,

DGR:29CURRPLAN keyword of JTOPTS CT:52Customer Engineering Program Support DGR:4—4customer number, IBM DGR:5customers, queries from GI:37customization

APPC/APPN T4:39customizing

case-code-definition module (EQQCASEM) CT:226

customizing (continued)dataset deletion utility (EQQDELDS) CT:227ended-in-error-list layout table CT:223Hiperbatch support CT:223messages CT:221miscellaneous CT:221—227panels CT:222ready-list layout table CT:223RODM (Resource Object Data Manager) CT:224

customizing for APPC communications T4:24cutover IG:146, IG:147CWBASE keyword of INIT CT:39CWW, JCL variable PSW:283CWWD, JCL variable PSW:283CX (current plan extension) DGR:29cycle specification

for rules GS:28, PSW:82cyclic periods PSW:62CYMD, JCL variable PSW:283CYY, JCL variable PSW:283CYYDDD, JCL variable PSW:283CYYMM, JCL variable PSW:283CYYMMDD, JCL variable PSW:283CYYYY, JCL variable PSW:283CYYYYMM, JCL variable PSW:283

DD extended status code PSW:346, CMW:116D occurrence status code PSW:345, CMW:115D operation status code PSW:345, CMW:115D row command CMW:60, CMW:62, CMW:96daily operating plan report record in DP

(DAIOP) DGR:112daily plan

report on completed applications PSW:193daily plan actual workstation resource report DGR:76daily plan completed/deleted application report

record DGR:78daily plan header report record (DPH) DGR:117daily plan report record DGR:119daily plan summary of completed/deleted applications

report DGR:111daily planning PSW:187

analyzing problems PSW:196completed applications report PSW:415error statistics on completed applications PSW:416missed feedback report PSW:417new current plan process PSW:203operation in error report PSW:417reports

actual resource utilization PSW:418general information report PSW:408operating plan PSW:409parallel operations, daily planning

report PSW:411plan for work station PSW:410


daily planning (continued)reports (continued)

planned resource utilization PSW:413resource 1, daily planning report PSW:412summary of completed applications

report PSW:414workstation resource utilization reports PSW:412workstation utilization reports PSW:411

Daily Planning dialog WMUG:7daily planning job DGR:58daily planning report exit (EQQDPUE1) CT:172DASD keyword of ROUTOPTS CT:89data area (PIF), format of PI:10data areas

acutal workstation resource report in DP DGR:76ADR (application description) DGR:71calendar DGR:77case code list DGR:81completed/deleted application report record in

DP DGR:78CPLREC01 (current plan record type 1) DGR:81CPLREC02 (current plan record type 2) DGR:83CPLREC04 (current plan record type 4) DGR:86CPLREC05 (current plan record type 5) DGR:89CPLREC06 (current plan record type 6) DGR:90CPLREC07 (current plan record type 7) DGR:91CPLREC08 (current plan record type 8) DGR:92CPLREC09 (current plan record type 9) DGR:93CPLREC10 (current plan record type 10) DGR:95CPLREC11 (current plan record type 11) DGR:95CPLREC12 (current plan record type 12) DGR:97CPLREC13 (current plan record type 13) DGR:98CPLREC3C (current plan record type 3C) DGR:103CPLREC3P (current plan record type 3P) DGR:106CPLREV14 (current plan record type 14) DGR:102daily operating plan report record in DP

(DAIOP) DGR:112daily plan actual workstation resource

report DGR:76daily plan completed/deleted application report

record DGR:78daily plan summary of completed/deleted

applications report DGR:111DOA (dynamic operation area) DGR:114DPH (daily plan report header record) DGR:117DPIN or DPUT (report record in DP) DGR:119DQE (data queue element) DGR:120EMP (event manager parameter area) DGR:124EPR (event dataset positions) DGR:126EQE (event queue element) DGR:127error statistics report record in DP DGR:128ESP (event split record) DGR:129ETC (ETT criteria record) DGR:130EVT (event and SUBREL dataset record) DGR:131EXC (catalog management event) DGR:133EXE (backup event) DGR:136

data areas (continued)EXF (joblog retrieval event) DGR:137EXH (backup event) DGR:139EXI (initialization event) DGR:140EXJ (job-log-retrieval event) DGR:142EXM (activate/deactivate event) DGR:144EXO (on/off line event) DGR:144EXR (exit record) DGR:145EXS (resource event) DGR:148EXSA (resource event extension) DGR:149EXT (ready to receive event) DGR:150EXU (user event record) DGR:151EXW (workstation status event) DGR:152EXX (tracker agent event record) DGR:153ID (tracker identification record) DGR:154JCLREC (fixed part of JCL record) DGR:158JSLOG (job-log record in EQQXJSDS) DGR:159JV (JCL variable table) DGR:160LTP (long-term plan) DGR:162MCA (main communication area) DGR:165MFB (missed feedback record in DP) DGR:169MT0 track information entry DGR:174MTD track information DGR:170NJE (JES NJE record) DGR:179NMM (normal mode manager parameters) DGR:180NNN (node name record) DGR:183OPC (status record) DGR:184OPERR (Ops in error report record in DP) DGR:185OPI (operator instruction) DGR:187OPT (subsystem options) DGR:188PER (period layout) DGR:193REL (job release record) DGR:194RSR (special resource record) DGR:194RSRR (special resource report record) DGR:200SSX (subsystem communication vector table

extension) DGR:201summary of completed/deleted applications report in

dp DGR:111TOC (table of contents for DP report) DGR:205TRL (job-tracking and audit record) DGR:206WAP (workstation analyzer parameters) DGR:213WQA (workstation queue area) DGR:214WSD (workstation description record) DGR:217WSN (workstation resource report record in

DP) DGR:220WSP (workstation plan report record in

DP) DGR:221Data Facility Hierarchical Storage Manager

(DFSHM) GI:3data lookaside facility (DLF) IG:59, CT:223, PSW:56data queue element (DQE) DGR:120data router (DX) subtask DGR:47data security CT:122data store job log retrieval

statements relating to CT:104


data, things to check for if not receiving WMUG:105database

application description PSW:128, DGR:28calendar DGR:28job descriptions DGR:28operator instruction PSW:128, DGR:28period DGR:28side information DGR:28special resources DGR:28variable table DGR:28workstation DGR:28

Database dialog WMUG:7databases WMUG:2databases, migrating IG:141, IG:145, IG:146dataset backup and recovery CT:231—244dataset triggering PSW:56

implementing IG:59dataset triggering selection table macro (EQQLSENT)

invoking IG:193syntax IG:193

datasetsallocating IG:67—81

non-VSAM IG:72—81VSAM IG:68

considerations when allocatingapplication description (EQQADDS) IG:71automatic-recovery-procedure library

(EQQPRLIB) IG:80checkpoint (EQQCKPT) IG:75current plan (EQQCPnDS) IG:71diagnostic (EQQDUMP) IG:75diagnostic message and trace

(EQQDMSG) IG:75dual job-tracking log (EQQDLnn) IG:79dump (SYSMDUMP) IG:76event (EQQEVDS) IG:76general IG:67JCC incident log IG:78JCC incident work (EQQINCWK) IG:79JCC message table (EQQJCLIB) IG:78JCL repository (EQQJSnDS) IG:72job library (EQQJBLIB) IG:78job-tracking archive (EQQJTARC) IG:79job-tracking log (EQQJTnn) IG:79message log (EQQMLOG) IG:80parameter library (EQQPARM) IG:80PIF parameter dataset (EQQYPARM) IG:80started-task submit (EQQSTC) IG:81submit/release (EQQSUDS) IG:81

EQQAD2DS PSW:158EQQADDS PSW:158EQQDUMP PSW:158EQQJBLIB PSW:212EQQMLIB PSW:158EQQMLOG PSW:158EQQOIDS PSW:158

datasets (continued)EQQOIPDS PSW:158EQQSTC PSW:212EQQWSDS PSW:158for long-term plan PSW:176in Tivoli OPC procedure JCL

optional IG:85required IG:83

ISPF profile IG:87JCL repository (EQQJSnDS) PSW:212migrating IG:141, IG:145, IG:146security IG:62SYSUDUMP PSW:158Tivoli OPC dialog IG:89

datespecifying format GS:6, CMW:8

Date fields, influenced by Country Settings WMUG:30date formats in Tivoli OPC DGR:70date-related supplied variables PSW:282date, internal CT:42DATEFORM keyword of BATCHOPT CT:18DAY keyword PSW:143day specification

for rules GS:28, PSW:82day status PSW:60DB2 CMW:63DB2 database

creating IG:87using PSW:223

DB2 tablesEQQHI13 DGR:225EQQHI14 DGR:226EQQHI3C DGR:226EQQHI3P DGR:227EQQHIMN DGR:225

DB2AVAIL keyword of BATCHOPT CT:18DB2SYSTEM keyword of BATCHOPT CT:19DB2SYSTEM keyword of OPCOPTS CT:74DBCS (double-byte character set) CMW:16

and job descriptions PSW:70, PSW:118DBCSOPTS initialization statement CT:24

APPLID keyword CT:25example of CT:25OWNERID keyword CT:25SORTORDER keyword CT:25

DC (catalog management) subtask DGR:45ddnames being used CMW:42deactivating automatic recovery PSW:265deactivating event-triggered tracking (ETT) PSW:268deactivating job submission PSW:205deactivating variable substitution PSW:276, PSW:294deadline WMUG:3

specifying GS:26, PSW:80DEADLINE - START > 24 HRS message PSW:181deadline date CMW:48


DEADLINE WTO option PSW:105deallocating a resource CMW:93DECEMBER keyword PSW:143default calendar PSW:10, CMW:10default date PI:12default dialog–controller connection table IG:88default time for an operation PSW:33defining a subsystem T4:31defining applications PSW:13, PSW:69, PSW:75defining calendars PSW:10, PSW:59Defining Dependencies in the Current Plan

panel CMW:53defining ETT criteria PSW:268defining JCL variable tables PSW:64defining job descriptions PSW:117defining local LU T4:13defining operations PSW:92defining periods PSW:62defining predecessors PSW:94defining reporting attributes PSW:29defining resource usage PSW:97defining rules PSW:78defining run cycles PSW:78defining SNA resources T4:12defining special resources PSW:8, PSW:45defining subsystem name T4:32defining workstations PSW:5, PSW:23DEL OCL instruction PI:138delaying operations CMW:33delays CMW:36DELAYTIME keyword of DSTOPTS CT:26DELETE command WMUG:43DELETE request (PIF) PI:15Deleted, status for operations WMUG:40deleting a subsystem T4:39deleting completed occurrences from the

LTP PSW:166deleting datasets

for job recovery PSW:235deleting dependencies CMW:51deleting log files T4:48deleting occurrences CMW:60deleting operations CMW:62DELPRED OCL instruction PI:134DELRES OCL instruction PI:137DELUNSTR keyword of DSTUTIL CT:29DEP primary command CMW:61dependencies PSW:72, WMUG:3

adding CMW:51changing CMW:61changing in the LTP PSW:185checking GS:49, CMW:40defining GI:14displaying graphically

with GRAPH command CMW:15graphic display of GI:15

dependencies (continued)in AD database PSW:128in the long-term plan PSW:177long-term plan default PSW:183resolving PSW:96, PSW:195specifying PSW:94, CMW:50

DEPENDENCY CHANGED message PSW:181dependency loop PSW:196dependency resolution with ETT PSW:268dependent variable PSW:287DESCR keyword PSW:140, PSW:147, PSW:153deselecting WMUG:27DESTID keyword of ROUTOPTS CT:90DESTINATION keyword of RODMOPTS CT:85destination of workstations PSW:33DETAILS command PSW:118Details view

Operations List object WMUG:37Plan object WMUG:19

General page WMUG:15specifying settings WMUG:18using WMUG:18

Workstations List object WMUG:75determining the success or failure of a job PSW:227

statements relating to CT:102deviation CMW:94

changing CMW:97of special resources PSW:41, PSW:332

DFHSM PSW:239DFHSM (Data Facility Hierarchical Storage

Manager) GI:3diagnosing problems UX:69, OW:41diagnostic dataset

EQQDMSG IG:73, IG:75EQQDUMP IG:73, IG:75, IG:96, PI:5SYSMDUMP IG:56, IG:73, IG:76

dialogaccess to CT:125choosing Workload Monitor/2 or ISPF WMUG:7commands, ISPF in dialog CMW:14description IG:7entering IG:90EQQMINOR, authorizing IG:57initializing IG:87introduction GS:5, CMW:7ISPF DGR:25ISPF command table IG:88main menu, panel EQQOPCAP CMW:7modify current plan GS:57, CMW:43options, setting GS:5, CMW:8overview GS:5, CMW:7parameters, setting GS:5, CMW:8problem determination procedures IG:114query current plan GS:45, CMW:37Ready List CMW:21security IG:63, CT:125


dialog (continued)workload monitor/2 DGR:27

differences in translated versionsprinted page WMUG:78RECEIVE command WMUG:85screen display WMUG:9

Digital OpenVMSsoftware requirements for controlled system GI:52,

IG:202Digital OpenVMS requirements, hardware and

software UX:119Digital UNIX requirements, hardware and

software UX:123directives in JCL PSW:295directories UX:15directory structure UX:15, UX:55, OW:23disabling variable substitution PSW:276, PSW:294disaster recovery planning (DRP) CT:249—258

designing a plan CT:249—251environment considerations CT:250secondary-center options CT:249

implementing recovery CT:251—258point-of-failure CT:256predefined point CT:254start-of-day CT:252

discarding actions CMW:84dispatching priority IG:59displaying List view WMUG:33displaying object authority T4:36displaying the APPC line description T4:26displaying the trace log T4:52displaying the tracker files T4:46displaying workstations WMUG:63distribution media UX:3, OW:2distribution tape IG:8, T4:3DLDAY keyword PSW:140DLF (data lookaside facility) IG:59, CT:223, PSW:56DLTF command T4:22DLTIME keyword PSW:141DLTLIB command T4:39DNS server OW:9DOC (documentation) keyword DGR:12documentation

APAR box DGR:8DOC keyword DGR:12for APAR DGR:7general DGR:8mailing DGR:8sending to change team DGR:8sending via a communications link DGR:8

double-byte character set (DBCS) CMW:16and job descriptions PSW:70, PSW:118

downloading the file from tape T4:19downloading the installation program WMUG:84downloading the OS/400 Tracker Agent

from tape T4:19

downloading the OS/400 Tracker Agent (continued)using FTP T4:17using NJE T4:16

DPALG keyword of BATCHOPT CT:19DPH (daily plan header) report record DGR:117DPIN (daily planner) report record in DP DGR:119DPROUT keyword of BATCHOPT CT:19DPUT (daily planner) report record in DP DGR:119DQE (data queue element) DGR:120DRP

See disaster recovery planning (DRP)DSNAME value in variable validation PSW:290DSPLIB command T4:22DSPLIND command T4:26DSPNETA command T4:27DSPOBJAUT command T4:36DSPSAVF command T4:23DSTGROUP keyword of DSTOPTS CT:27DSTGROUP keyword of FLOPTS CT:37DSTHIGHJOBID keyword of DSTOPTS CT:27DSTLOWJOBID keyword of DSTOPTS CT:27DSTLUNAME keyword of DSTOPTS CT:27DSTMEM keyword of DSTOPTS CT:27DSTOPTS initialization statement CT:25

CINTERVAL keyword CT:26CLNPARM keyword CT:26CTLLUNAM keyword CT:26CTLMEM keyword CT:26DELAYTIME keyword CT:26DSTGROUP keyword CT:27DSTHIGHJOBID keyword CT:27DSTLOWJOBID keyword CT:27DSTLUNAME keyword CT:27DSTMEM keyword CT:27DSTREQUEUE keyword CT:27DSTREQUEUEDEF keyword CT:27HOSTCON keyword CT:27MAXSTOL keyword CT:27MAXSYSL keyword CT:27NWRITER keyword CT:27QTIMEOUT keyword CT:28REQMETHOD keyword CT:28STOREMETHOD keyword CT:28SYSCLASS keyword CT:28WINTERVAL keyword CT:28

DSTREQUEUE keyword of DSTOPTS CT:27DSTREQUEUEDEF keyword of DSTOPTS CT:27DSTTASK keyword of OPCOPTS CT:74DSTUTIL initialization statement CT:28

DELUNSTR keyword CT:29EXPUNSTR keyword CT:30IMPORTSTR keyword CT:30RECOVER keyword CT:30

dual job-tracking-log dataset (EQQDLnn) PSW:199DUAL keyword of JTOPTS CT:53


dummy application CMW:46dummy operation PSW:27dummy workstation PSW:27dump content definitions IG:56dump dataset (SYSMDUMP) IG:56, IG:73, IG:76,

DGR:16duplicate occurrences PSW:177duration GS:17, PSW:33

feedback PSW:105DURATION keyword PSW:147duration per workstation report PSW:407DX (data router) subtask DGR:47dynamic dataset allocation PSW:240dynamic exits (PROGnn) IG:54, IG:55dynamic inclusion of JCL PSW:273dynamic operation area (DOA) DGR:114dynamic resource creation PSW:53dynamic-format supplied variables PSW:283, PSW:298DYNAMICADD keyword of BATCHOPT CT:19, PSW:54DYNAMICADD keyword of RESOPTS CT:81, PSW:54DYNAMICDEL keyword of BATCHOPT CT:20, PSW:54

EE extended status code PSW:346, CMW:116E occurrence status code PSW:345, CMW:115E operation status code PSW:345, CMW:115EBCDIC PI:64ECB list DGR:42ECSA (extended common service area) IG:51Editing JCL for an MVS Job panel PSW:233, CMW:83,

CMW:85editing JCL for an operation GS:55, CMW:30Editing JCL for an Operation panel CMW:30, CMW:32editing JCL variable tables PSW:285EIADAYS keyword PSW:140ELSE OCL clause PI:120EM (event manager) subtask DGR:48embedded blanks in JCL variables PSW:295

with COMP keyword PSW:308EMR (event manager parameter area) DGR:124enabler support

loading for the OS/400 Tracker Agent T4:7loading for the Tracker Agent UX:7, OW:4

enabling JCL variable substitution PSW:276END command PSW:25END JCL directive PSW:303end time

of a work day PSW:61end users, queries from GI:37ended-in-error list

layout CMW:74sample to view output CT:318

ended-in-error operations GS:61, PSW:227, CMW:73ended-in-error status CMW:29

ended-in-error-list layout table IG:89, CT:223ending the OS/400 Tracker Agent T4:46ENDNET file WMUG:94ENDNONET file WMUG:94ENDOPC command T4:46ENDSDLC file WMUG:94ENDTIME keyword of AROPTS CT:10, PSW:252ENTERED MANUALLY (ONLINE) message PSW:181entry-point tracker

description T4:11subsystem definition T4:32

ENUM value in variable validation PSW:290environment setup IG:158environment variable

EQQHOME UX:48, OW:25EQQINSTANCE UX:48, OW:25PATH UX:48, OW:25

EPR (event dataset positions) layout DGR:126EQE (event queue element) layout DGR:127EQQ4LOG T4:47, T4:58EQQA4TOP DGR:38EQQACGPP panel PSW:76EQQACMDS DGR:26EQQACRTE panel PSW:109EQQAD2DS dataset PSW:158EQQADCOP DGR:32EQQADCOP batch program PSW:354EQQADDEP DGR:32EQQADDEP batch program PSW:355EQQADDS DGR:27EQQADDS (application description dataset) IG:68,

PSW:158considerations when allocating IG:71recovery CT:237

EQQADMUP DGR:32EQQADMUP batch program PSW:356EQQADPRT DGR:32EQQADPRT batch program PSW:357EQQADXRF DGR:32EQQADXRF batch program PSW:359EQQALSML panel PSW:109EQQAMFBP panel PSW:106EQQAMJBP panel PSW:101EQQAMOPL panel PSW:92EQQAMOSL panel PSW:94EQQAMPDL panel PSW:96EQQAMRNL panel PSW:86EQQAMRPL panel PSW:80EQQAMSDP panel PSW:95, PSW:121EQQAMSRL panel PSW:98EQQAMTMP panel PSW:108EQQAMWRP panel PSW:100EQQAOIDP panel PSW:110EQQARTOP DGR:38EQQAUFIP panel PSW:126


EQQAUPDL panel PSW:124EQQAUUGL panel PSW:125EQQAXMDL DGR:26EQQAXR00 DGR:32EQQAXR00 batch program PSW:360EQQBATCH DGR:32EQQBATCH program PSW:351EQQBRDS (internal reader dataset) IG:75EQQCASEC (case-code-list definition macro) CT:11,

CT:226, CT:305, PSW:264, DGR:44EQQCASEM (case-code-definition module) CT:11,

CT:226EQQCBTOP DGR:38EQQCKPT T4:47EQQCKPT (checkpoint dataset) IG:73, PSW:199,

DGR:29considerations when allocating IG:75recovery CT:241

eqqclean script UX:66EQQCLPRC batch program PSW:361EQQCLPRP DGR:32EQQCLPRP batch program PSW:362EQQCLPRT DGR:32EQQCP1DS (primary current plan dataset) PSW:199,

DGR:29recovery CT:232—236

from LTP CT:239from new current plan CT:240

EQQCP2DS (alternate current plan dataset) PSW:199,DGR:29

recovery CT:232—236from LTP CT:239from new current plan CT:240

EQQCPnDS (current plan dataset) IG:68considerations when allocating IG:71

EQQCXDS (current plan extension dataset) PSW:199,DGR:29

recovery CT:232—236from new current plan CT:240

EQQDCTOP DGR:38EQQDELDS (deleting datasets)

sample CT:320eqqdelete script UX:65EQQDLFX exit sample PSW:56EQQDLnn (dual job-tracking-log dataset) IG:73,

PSW:199considerations when allocating IG:79recovery CT:241

EQQDMSG (diagnostic message and tracedataset) IG:73

considerations when allocating IG:75EQQDNTOP DGR:32EQQDNTOP batch program PSW:363EQQDOTOP DGR:32EQQDOTOP batch program PSW:366

EQQDPCOP DGR:32EQQDPLNP panel PSW:189EQQDPUE1 (daily planning report exit) CT:172eqqdr_retry UX:52, OW:26EQQDRTOP DGR:32EQQDRTOP batch program PSW:368EQQDTTOP DGR:32EQQDTTOP batch program PSW:370EQQDUMP (diagnostic dataset) IG:73, IG:96,

PSW:158, DGR:8, DGR:17, DGR:21considerations when allocating IG:75

EQQDUMP dataset PI:5EQQDXTOP DGR:38EQQELDEF DGR:26EQQELDEF member CMW:76EQQELOUT member CMW:76EQQELYCL panel CMW:75EQQELYLL panel CMW:75EQQEMTOP DGR:38EQQERTOP DGR:38EQQEVDnn (event dataset for an event reader) IG:73

calculating optimum LRECL IG:77considerations when allocating IG:76

EQQEVDS (event dataset) IG:73, DGR:29calculating optimum LRECL IG:77considerations when allocating IG:76recovery CT:242

EQQEVENT T4:47, T4:59EQQEVERT DGR:26EQQEVPGM DGR:32EQQEVPGM batch program PSW:317, PSW:372

changing operation status PSW:25, PSW:40in event-triggered tracking PSW:267

EQQEWTOP DGR:38EQQEXIT DGR:34EQQEXIT (event-tracking-code generation macro)

in JES exits IG:49, IG:189in SMF exits IG:49, IG:189invoking IG:189syntax IG:190

EQQEXTOP DGR:38eqqfilespace UX:52, OW:26EQQGJCCT (JCC general message table) CT:201EQQGSBEX DGR:38EQQGSTOP DGR:38EQQHI13 DB2 table DGR:225EQQHI14 DB2 table DGR:226EQQHI3C DB2 table DGR:226EQQHI3P DB2 table DGR:227EQQHIMN DB2 table DGR:225EQQHIPUP panel CMW:65EQQHISTL panel CMW:64EQQHOME variable UX:48, OW:25EQQICTOP DGR:32EQQINCWK (JCC incident work dataset) IG:73

considerations when allocating IG:79


eqqinit UX:97EQQINITD IG:51, DGR:33EQQINSTANCE variable UX:48, OW:25EQQJBLIB (job library dataset) IG:73, PSW:12,

PSW:110, PSW:212, PSW:262considerations when allocating IG:78

EQQJCCT (JCC message-table macro) CT:203,CT:305

creating a general message table, example CT:207examples of coding CT:204how to use CT:203

EQQJCGPP panel PSW:118EQQJCLIB (JCC message table dataset) IG:73,

CT:201considerations when allocating IG:78

EQQJCTOP DGR:38EQQJLTOP DGR:38EQQJMTCL panel PSW:268EQQJOBS installation aid

creating sample JCL IG:40description IG:38generating Tivoli OPC batch-job skeletons IG:45setting up IG:39

EQQJS1DS DGR:29, DGR:30EQQJS2DS DGR:29, DGR:30EQQJSnDS (JCL repository dataset) IG:68, PSW:12,

PSW:111, PSW:185considerations when allocating IG:72recovery CT:239

EQQJSUBP panel PSW:117EQQJTARC (job-tracking-archive dataset) IG:73,

PSW:199, DGR:29, DGR:30, DGR:55considerations when allocating IG:79recovery CT:241

EQQJTnn (job-tracking-log dataset) IG:73, PSW:199considerations when allocating IG:79recovery CT:240

EQQJVDVL panel PSW:287EQQJVMAP menu PSW:285EQQJVPRT DGR:33EQQJVPRT batch program PSW:373EQQJVTML panel PSW:285EQQJVVCL panel PSW:285EQQJVVEP panel PSW:290EQQJVVMP panel PSW:286EQQLBATP panel PSW:176EQQLBDWP panel PSW:183EQQLCDPL panel PSW:186EQQLCHGP panel PSW:185EQQLCREP panel PSW:178EQQLDDS (long-term plan work dataset) IG:68,

PSW:176EQQLEXTP panel PSW:179EQQLPRAP panel PSW:180EQQLSENT (dataset triggering selection table macro)

invoking IG:193

EQQLSENT (dataset triggering selection table macro)(continued)

syntax IG:193EQQLSTAP panel PSW:182EQQLSTOL panel PSW:185EQQLTBKP (long-term-plan backup dataset) IG:68,

PSW:176use in recovery CT:232, CT:238

EQQLTCRE DGR:33EQQLTCRE batch program PSW:374EQQLTDS (long-term plan dataset) IG:68, PSW:176

recovery CT:238EQQLTEXP panel PSW:182EQQLTMOA DGR:33EQQLTMOA batch program PSW:375EQQLTMOO DGR:33EQQLTMOO batch program PSW:377EQQLTOPP panel PSW:175EQQLTPRT DGR:33EQQLTPRT batch program PSW:378EQQLTTRY DGR:33EQQLTTRY batch program PSW:380EQQLUDEF DGR:26EQQMAADL panel CMW:48EQQMAAGL panel CMW:54EQQMADDP panel CMW:47EQQMAJOR DGR:35, DGR:38EQQMAMOL panel CMW:56EQQMAOCP panel CMW:48EQQMCMDL panel CMW:85EQQMEP1L panel CMW:73EQQMERRP panel CMW:74EQQMERSL panel PSW:229, CMW:79EQQMERTP panel CMW:77EQQMINOR, authorizing for TSO IG:57EQQMJCLE panel PSW:233, CMW:83, CMW:85EQQMLIB dataset PSW:158, PI:5EQQMLOG

checking at the controller IG:112checking at the server IG:113

EQQMLOG (message log dataset) IG:73, PSW:158,PI:5, DGR:8, DGR:21

considerations when allocating IG:80EQQMMADP panel CMW:53EQQMMDLL panel CMW:53EQQMMODP panel CMW:52EQQMMOPL panel CMW:52EQQMOCLL panel CMW:57EQQMOPRL panel CMW:62EQQMOSTL panel CMW:59EQQMROCL panel CMW:58eqqmsgq UX:52, OW:26EQQMTOPP menu CMW:45EQQMTOPP panel PSW:198EQQMWSOL panel CMW:70


EQQMWSRP panel CMW:68EQQMWSVP panel CMW:69EQQNCPDS (new current plan dataset) IG:68,

PSW:199, DGR:29recovery

from LTP CT:239use in recovery CT:232—236, CT:240

EQQNCXDS (new current plan extensiondataset) IG:68, PSW:199, DGR:29

recoveryfrom LTP CT:239

use in recovery CT:232—236, CT:240EQQNMTOP DGR:38EQQODBSP menu PSW:48EQQOIBAT DGR:33EQQOIBAT batch program PSW:382EQQOIBLK DGR:33EQQOIBLK batch program PSW:383EQQOIDS (operator instruction dataset) IG:68,

PSW:158recovery CT:237

EQQOIPDS dataset PSW:158EQQPARM (parameter library) IG:73

considerations when allocating IG:80creating the statements CT:3identifying related statements CT:99

auditing CT:102automatic job recovery CT:105catalog management CT:103configuration CT:100data store job log retrieval CT:104determining success or failure of a job CT:102output processing CT:108performance CT:106recovery CT:103reporting CT:107RODM CT:107security CT:101workload restart CT:105

overview CT:4selecting statements CT:4storing the statements CT:4

EQQPDLF DGR:33EQQPHAPP DGR:39EQQPHTOP DGR:39EQQPPTOP DGR:38EQQPRLIB (automatic-recovery-procedure

library) IG:73considerations when allocating IG:80

EQQPURGE DGR:33EQQPURGE batch program PSW:386EQQQ515W special resource contention

message CT:81EQQQDCRP panel PSW:49EQQQDIML panel PSW:51, CMW:98

EQQQDLSL panel PSW:49EQQQDTOP menu PSW:48EQQQDWML panel PSW:52, CMW:99EQQQMIML panel CMW:95EQQQMLSL panel CMW:94EQQQMMOP panel CMW:97EQQQMSEP panel CMW:93EQQQMWML panel CMW:96EQQRCSIM DGR:33EQQRCSIM batch program PSW:389EQQRCSIM procedure CMW:81EQQRDDS DGR:27EQQRDDS (resource description dataset) IG:68

recovery CT:238EQQRJCLE panel CMW:30, CMW:32EQQRLDEF DGR:26EQQRLOUT DGR:26EQQRLRLM panel CMW:27EQQRLVAL panel CMW:31EQQRLYCL panel CMW:24EQQRLYLL panel CMW:23EQQRMTOP DGR:38EQQROUTER (focal-point communications

router) T4:57EQQRSRLP panel CMW:22EQQRTOPP panel CMW:21EQQRULEP panel PSW:81EQQRULSL panel PSW:82EQQSAOSP panel CMW:38EQQSERVR DGR:39EQQSGCPP panel CMW:42eqqshell UX:52eqqshmkey UX:52, OW:26EQQSIDS (side information dataset) IG:68, PSW:199,

DGR:29recovery CT:238

EQQSJCLB panel CMW:80EQQSMC1P panel CMW:39EQQSOPSP panel CMW:36, CMW:40EQQSPG1L panel CMW:40EQQSSCMD DGR:33, DGR:34EQQSTC (started-task-submit dataset) IG:73, PSW:24,

PSW:212considerations when allocating IG:81

EQQSTOPP panel PSW:198, CMW:37EQQSUBMIT (submittor task) T4:58EQQSUDS (submit/release dataset) IG:13, IG:73

considerations when allocating IG:81recovery CT:243

EQQSUTOP DGR:38EQQSWAUP program CMW:81EQQSWSSP panel CMW:41EQQTCCAL panel PSW:60EQQTCRPL panel PSW:63EQQTPERL panel PSW:63


eqqtr_retry UX:52, OW:26EQQTRACE T4:47, T4:52EQQTROUT (tracklog dataset) IG:79, PSW:195,

DGR:30, DGR:55EQQTTTOP DGR:38eqqtw_retry UX:52, OW:26EQQUSIN subroutine CT:177—190, PSW:215,

PSW:267, CMW:67, DGR:52APP buffer section CT:178APPDAT buffer section CT:183APPFLD buffer section CT:182APPOBJ buffer section CT:179APPSEL buffer section CT:181APPVAL buffer section CT:182buffer sections CT:177changing operation status PSW:25, PSW:40reason codes CT:190return codes CT:190samples of CT:308selecting objects


updating objectsCP_OPER_EVENT CT:187CP_OPINFO_EVENT CT:189CP_SR_EVENT CT:188CP_WS_EVENT CT:189

EQQUSINB subroutine CT:191, PSW:215, DGR:52EQQUSINO subroutine CT:192, PSW:215, DGR:52EQQUSINS subroutine CT:193, PSW:215, DGR:52EQQUSINT subroutine CT:194, PSW:215, DGR:52

changing operation status PSW:326EQQUSINW subroutine CT:196, PSW:215, DGR:52EQQUTOPP menu PSW:205EQQUX000 (start/stop exit) CT:136

sample of CT:309EQQUX001 (job-submit exit) CT:137

sample of CT:309EQQUX002 (job library read exit) PSW:262EQQUX002 (job-library-read exit) CT:140

sample of CT:309EQQUX003 (application-description-feedback

exit) CT:144EQQUX004 (event filtering exit) PSW:236, DGR:47EQQUX004 (event-filtering exit) CT:145, CT:202

sample of CT:310EQQUX005 (SYSOUT archiving exit) CT:147

sample of CT:310EQQUX006 (incident-record-create exit) CT:149,

CT:202sample of CT:311

EQQUX007 (operation-status-change exit)interface to Information/Management CT:152

EQQUX007 (operation-status-change exit) (continued)interface to NetView CT:152sample of CT:311

EQQUX008 (pre-catalog-management exit) CT:155,PSW:236, DGR:47

EQQUX009 (Operation-initiation exit) CT:158heterogeneous systems, controlling CT:261sample of CT:311

EQQUX010 (Job-log-retrieval exit) CT:160, DGR:47sample of CT:312

eqqverify UX:73EQQWATOP DGR:38EQQWCGEP panel PSW:28EQQWMACL panel PSW:37EQQWMAMP panel PSW:39EQQWMATL panel PSW:35EQQWMAVL panel PSW:34EQQWMLSL panel PSW:28EQQWMOTL panel PSW:34EQQWMREP panel PSW:38EQQWRITER (event writer task) T4:59EQQWSDS DGR:27EQQWSDS (workstation and calendar dataset) IG:68,

PSW:158recovery CT:237

EQQWSPRT DGR:33EQQWSPRT batch program PSW:390EQQXSUBP panel PSW:127, CMW:20EQQXVART DGR:26EQQYCOM subroutine (PIF) PI:3, PI:4, PI:171EQQYLTOP DGR:33EQQYLTOP batch program PSW:390EQQYLTOP program PSW:157EQQYPARM PI:12EQQYPARM (parameter dataset) PI:5

considerations when allocating IG:80EQQYPARM (parameter library CT:4EQQYPARM (PIF parameter dataset) IG:73EQQYRJCL sample job PI:164EQQYRPRC sample procedure PI:165EQQYTOPX DGR:33ER (event reader) subtask DGR:49ERDROPTS initialization statement CT:30

ERSEQNO keyword CT:30ERWAIT keyword CT:31example of CT:31RELDDNAME keyword CT:31

ERDRPARM keyword of OPCOPTS CT:74ERDRTASK keyword of OPCOPTS CT:75ERROR CODE = xxxx message PSW:181error codes PSW:347, CMW:117

catalog management PSW:348, CMW:118from completion codes PSW:225job log retrieval PSW:349, CMW:119set by Tivoli OPC PSW:225specifying CMW:49


error codes (continued)treating as normal completion codes CT:38, CT:57,

CT:68error list GS:61, CMW:73error messages WMUG:49

application programming interface PI:76batch loader PSW:159generated in long-term plan reports PSW:181program interface PI:5

error statistics on completed applications PSW:193,PSW:416

error statistics report record in DP DGR:128ERROR TRACKING option PSW:101Error, status for operation alerts WMUG:52Error, status for operations WMUG:40, WMUG:43errors from jobs UX:61, OW:37errors in variable substitution PSW:293errors, debugging UX:69ERRRES keyword of JTOPTS CT:53, PSW:227ERSEQNO keyword of ERDROPTS CT:30ERWAIT keyword of ERDROPTS CT:31ESP (event split record) layout DGR:129estimated duration WMUG:3, WMUG:59

feedback PSW:105ETC (ETT criteria record) layout DGR:130ETT criteria record (ETC) layout DGR:130ETT dialog PSW:268ETT keyword of JTOPTS CT:53, PSW:207, PSW:268ETT record

deleting PI:19selecting PI:56

ETT segmentlisting PI:36selecting PI:56

ETTRCY1 period IG:143, IG:150ETTRCY1 period use by ETT PSW:271event and SUBREL dataset record (EVT)

layout DGR:131event control block (ECB) DGR:42event dataset

description IG:11for an event reader (EQQEVDnn) IG:73for an event writer (EQQEVDS) IG:73for submit checkpointing IG:11, IG:73recovery CT:242time zones PSW:217verify IG:108

event dataset positions (EPR) layout DGR:126event datasets DGR:30event log file T4:47, T4:59event logfile UX:52, UX:53, UX:72, UX:96, OW:24,

OW:42, OW:64event manager (EM) subtask DGR:48event manager parameter area (EMP) DGR:124event queue element (EQE) layout DGR:127

event reader (ER) subtask DGR:49event reporting CT:175—198

broadcasting CT:183—198description CT:175heterogeneous systems, controlling CT:262subroutines

EQQUSIN CT:177EQQUSINB CT:191EQQUSINO CT:192EQQUSINS CT:193EQQUSINT CT:194EQQUSINW CT:196general information CT:176

TSO commandsdescription CT:175

VM, controlling CT:263event split record (ESP) layout DGR:129event types IG:107event writer

using with event reader function IG:25event writer (EW) subtask DGR:50event writer task (EQQWRITER) T4:59event-filtering exit (EQQUX004) CT:145event-tracking-code generation macro (EQQEXIT)

in JES exits IG:49, IG:189in SMF exits IG:49, IG:189invoking IG:189syntax IG:190

event-triggered tracking (ETT) PSW:267—272activating PSW:207adding an occurrence to the current plan PSW:270and the SUBMIT option CT:64deactivating PSW:207period ETTRCY1 PSW:271

event_logsize UX:52, OW:26events DGR:48

how they are generated PSW:215triggered by availability changes PSW:56

events, broadcasting PI:75, PI:216EVERY

in rules GS:28, PSW:82EVERY keyword PSW:142EVT (event and SUBREL dataset record)

layout DGR:131EW (event writer) subtask DGR:50ew_check_file UX:52, OW:26EWSEQNO keyword of EWTROPTS CT:32EWTROPTS initialization statement CT:31

EWSEQNO keyword CT:32, DGR:50EWWAIT keyword CT:32example of CT:35HOLDJOB DGR:49HOLDJOB keyword CT:32PRINTEVENTS keyword CT:34RETCODE keyword CT:34, PSW:225, PSW:227SKIPDATE keyword CT:34


EWTROPTS initialization statement (continued)SKIPTIME keyword CT:34STEPEVENTS keyword CT:34, PSW:227SUREL keyword CT:35

EWTRPARM keyword of OPCOPTS CT:75EWTRTASK keyword of OPCOPTS CT:75EWWAIT keyword of EWTROPTS CT:32EX (external router) subtask DGR:53EX command CMW:62example of batch-loader statements PSW:130examples of job recovery PSW:256EXC (catalog management event) layout DGR:133EXCLUDECC keyword of AROPTS CT:11EXCLUDERC keyword of AROPTS CT:11excluding applications CMW:55excluding JCL PSW:295exclusion rule PSW:81EXE (backup event) layout DGR:136EXECUTE command PSW:210, CMW:35, WMUG:43EXECUTE request (PIF) PI:22

updating the current plan PI:10, PI:22EXF (joblog retrieval event) layout DGR:137EXH (backup event) layout DGR:139EXI (initialization event) layout DGR:140exit codes UX:70EXIT OCL instruction PI:126EXIT record (EXR) layout DGR:145EXIT01SZ keyword of OPCOPTS CT:75exits

application description feedback(EQQUX003) CT:144

automatic job recovery CT:170daily planning report CT:172event filtering (EQQUX004) CT:145, CT:202event tracking IG:49incident record create (EQQUX006) CT:149, CT:202JCL imbed CT:166JCL variable substitution CT:168job library read (EQQUX002) CT:140job submit (EQQUX001) CT:137Job-log-retrieval exit (EQQUX010) CT:160Job-Tracking log write CT:164operation status change (EQQUX007) CT:152Operation-initiation exit (EQQUX009) CT:158

heterogeneous systems, controlling CT:261pre-catalog-management (EQQUX008) CT:155sample CT:309start/stop (EQQUX000) CT:136SYSOUT archiving (EQQUX005) CT:147

exits for catalog management PSW:236EXITS initialization statement CT:35, DGR:66

CALLnn keyword CT:36example of CT:36LOADnn keyword CT:36

EXJ (job-log-retrieval event) DGR:142

EXM (activate/deactivate event) layout DGR:144EXO (on/off line event) layout DGR:144exporting graphic views WMUG:73EXPUNSTR keyword of DSTUTIL CT:30EXR (exit record) layout DGR:145EXS (resource event) layout DGR:148EXSA (resource event extension) layout DGR:149EXT (ready to receive event) layout DGR:150extended common service area (ECSA) IG:51extended status codes PSW:346, CMW:116extending plans CMW:2extending the current plan PSW:190extending the long-term plan PSW:179Extending the Long-Term Plan panel PSW:179external dependencies PSW:72, PSW:94, WMUG:3external dependencies in the LTP PSW:178external predecessors GS:32

resolving PSW:96external router (EX) subtask DGR:53EXU (user event record) layout DGR:151EXW (workstation status event) layout DGR:152EXX (tracker agent event record) layout DGR:153

Ffailed job recovery PSW:20failed jobs

planning PSW:219FAILED workstation status CMW:67failure or success of a job PSW:227failures and problems UX:69fallback IG:149fast path GS:7, GS:8, CMW:14, CMW:15, CMW:45FEBRUARY keyword PSW:143feedback algorithms

limit for feedback PSW:107smoothing factor CT:61, PSW:106

feedback options PSW:105Feedback Options panel PSW:106feedback report PSW:195feedback, missed (daily planning report) PSW:417FETCH JCL directive PSW:306fields

choosing for Operations List object WMUG:25choosing for Workstations List object WMUG:62limitations for graphic views of Workstations List

object WMUG:62ordering in Operations List object WMUG:26

fields in graphic views of Workstations Listobject WMUG:67

Fields pageOperations List object WMUG:24Workstations List object WMUG:62

FILE keyword of AUDIT CT:13files

planning UX:15


files (continued)Tracker Agent OW:23

files currently in use CMW:42filter characters GS:9, CMW:16FILTER keyword of RESOURCE CT:84filter panel PSW:126, CMW:15, CMW:45Find Window WMUG:35finding a workstation WMUG:66finding an item in the List view WMUG:35finding data in a list GS:11, CMW:17fixed part of JCL record (JCLREC) layout DGR:158fixed resources PSW:37, PSW:41, PSW:99fixed resources, security CT:114, CT:125fixing problems UX:69FLOPTS initialization statement CT:36

CTLLUNAM keyword CT:37CTLMEM keyword CT:37DSTGROUP keyword CT:37SNADEST keyword CT:37XCFDEST keyword CT:37

focal-point communications router(EQQROUTER) T4:57

focal-point trackerdescription T4:10subsystem definition T4:32

folders in Workload Monitor/2 WMUG:8fonts, changing in graphic views WMUG:70FORCE OCL instruction PI:142FORM NUMBER option PSW:104free days GS:18, PSW:36, PSW:60free-day rule GS:26

selecting PSW:86FREEDAY keyword PSW:143freeing a resource on error CMW:87frequency specification

for rules GS:28, PSW:82FRIDAY keyword PSW:143FTP, using to download the OS/400 Tracker

Agent T4:17function keys CMW:19functions of Tivoli OPC

security CT:122subtasks, activating IG:6

GGDDM IG:89, CMW:18

attributes, settingATTR command CMW:15

command CMW:15GDG recovery PSW:266GDGNONST keyword of OPCOPTS CT:75GEM GI:3

See also Tivoli Global Enterprise Manager (TivoliGEM)

GENALERT keyword of ALERTS CT:6GENDAYS command GS:28, PSW:83general information report

calendars PSW:392daily planning PSW:408long-term plan PSW:404

General page WMUG:14Plan object WMUG:15

general service (GS) subtask DGR:53general workstations WMUG:2

defining PSW:25job setup type PSW:25

preparing JCL PSW:112WTO type PSW:26

issuing operations PSW:112general-service executor tasks DGR:54generating events PSW:215Generating JCL for a Batch Job panel PSW:127,

CMW:20generating Tivoli OPC batch-job skeletons IG:45generation data group (GDG)

catalog management actions PSW:239recovery PSW:266

generic alert vectors CT:299generic search arguments GS:9, CMW:16global change to application definitions PSW:125global JCL variable table PSW:274, PSW:292global search characters PSW:307GMT (Greenwich Mean Time) PSW:217GMTOFFSET keyword of OPCOPTS CT:75GOTO OCL instruction PI:125grand total for period, long-term plan report PSW:407GRAPH command PSW:94, CMW:15, CMW:17Graph view

compared with Graphs view WMUG:77graphic display of dependencies GI:15graphic views of Workstations List object WMUG:6

changing color WMUG:69changing fonts WMUG:70considerations when using graphs WMUG:72copying WMUG:73exporting WMUG:73positioning labels WMUG:72positioning legends WMUG:72tailoring graphs WMUG:69

graphical attribute table IG:89Graphical Data Display Manager, see GDDMgraphical user interface (GUI) GI:6graphically displaying data in a list CMW:17graphs

fields for WMUG:62Graph view of a workstation object WMUG:77Graphs view of Workstations List object WMUG:67Merged graph of Workstations List object WMUG:74printing WMUG:80


group applicationsspecifying PSW:75

group definitionsadding an occurrence to a group CMW:54adding to the current plan CMW:46, CMW:54guidelines PSW:70, PSW:72in the long-term plan PSW:166, PSW:175introduction PSW:13

group ID (GID) UX:12GROUP keyword PSW:137GROUP keyword of XCFOPTS CT:97grouping return codes PSW:264GS (general service) queue DGR:42GS (general service) subtask DGR:53GSTASK keyword of OPCOPTS CT:75GTABLE keyword of OPCOPTS CT:76, PSW:292GUI GI:6

Hhandling operations ended in error GS:62Handling Operations Ended in Error panel CMW:73hardware requirements GI:47

Digital OpenVMS UX:119for AIX UX:111for Digital UNIX UX:123for HP-UX UX:113for OS/390 Open Edition UX:125for Silicon Graphics IRIX UX:121for Solaris UX:115for SunOS UX:117

hardware requirements for OS/2 OW:69hardware requirements for Windows NT OW:71HDRS keyword of BATCHOPT CT:20HELLO command WMUG:97HELP command GS:8helpdesk GI:37heterogeneous systems, controlling CT:262

introduction CT:261operation-initiation exit (EQQUX009) CT:261VM, event reporting CT:263

HEX value in variable validation PSW:290high date PI:12HIGHDATE keyword of INIT CT:40HIGHEST RETURNCODE option PSW:101, PSW:119highlight attributes, on panel CMW:10HIGHRC keyword of JTOPTS CT:54, PSW:147,

PSW:227Hiperbatch PSW:56

sample CT:319Hiperbatch support

COFDLFnn, updating IG:59installing CT:223

HIST command CMW:62histogram showing workstation utilization PSW:181

history database CMW:27, CMW:63history function CMW:63

installing IG:87using PSW:223

HOLD OCL instruction PI:150HOLD status PSW:210HOLD/RELEASE option PSW:104holding operations CMW:33HOLDJOB keyword of EWTROPTS CT:32home directory UX:15, OW:23

setting UX:48, OW:25host names UX:17, OW:9HOSTCON keyword of DSTOPTS CT:27HOSTCON keyword of TRROPTS CT:96hot standby GI:25, IG:25how to install fixes on a non-AIX tracker

machine UX:127HP-UX


HP-UX requirements, hardware and software UX:113

II extended status code PSW:346I operation status code PSW:345, CMW:115I row command CMW:62IADAYS keyword PSW:140IATIME keyword PSW:140IBM

access code DGR:5customer number DGR:5program support DGR:4support center DGR:4

IBMOPC resource class IG:62, IG:63ICHRFR01 IG:63ICHRIN03 IG:61ICHRRCDE IG:63icon

Operations List object WMUG:23Plan object WMUG:12Workstations List object WMUG:61

Icons viewOperations List object WMUG:53Workstations List object WMUG:59

ID (tracker identification record) layout DGR:154Identifying related initialization-statement

parameters CT:99IEFUJI DGR:46IF-THEN-ELSE OCL instruction PI:120IKJTSOnn member of SYS1.PARMLIB

AUTHCMD statement, updating for Tivoli OPC TSOcommands IG:58

AUTHTSF statement, updating forEQQMINOR IG:57


imbedded blanks in JCL variables PSW:295with COMP keyword PSW:308

implementation GI:44—44implementing Tivoli OPC PSW:1IMPORTSTR keyword of DSTUTIL CT:30IMS GI:3

tracking jobs submitted by PSW:269in-effect dates PSW:89in-progress operation PSW:322in-use list CMW:95inactive workstation

effect on operations PSW:103INCDSN keyword of JCCOPTS CT:44incident log (JCC)

considerations when allocating IG:78incident logging, function of JCC CT:202incident-record-create exit (EQQUX006) CT:149,

CT:202INCLUDE initialization statement CT:38

NOERROR keyword CT:38Include window

Operations List object WMUG:28, WMUG:29,WMUG:54

Workstations List object WMUG:64including dependencies CMW:50including JCL PSW:295, PSW:306including objects

effect of security access WMUG:28, WMUG:53,WMUG:64

operations in Operations List object WMUG:28,WMUG:53

specifying include criteria WMUG:29, WMUG:30,WMUG:54, WMUG:64

workstations in Workstations List object WMUG:63including operations

in Operations List object WMUG:28incorrect output (INCORROUT) keyword DGR:12INCORROUT (incorrect output) keyword DGR:12in

Documents

Master Index - IBMpublib.boulder.ibm.com/tividd/td/opc/SH19-4375-02/... · 1 extended status code PSW:346 2 extended status code PSW:346 A A extended status code PSW:346, CMW:116