Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Master core technology
PRECISE CNC BRASS WIRE-CUT EDM AG/AE SERIES
Puge number01-02
AG
AE
Build perfect team Create world brand
AG machine perfectly show the high precision,high efficiency and high stability.It also reflects NOVICK's spirit of craftsman.It is the quality choice of the brass wire-cut EDM.
AE machine perfectly show high energy saving,high cost performance and easy operation.It also reflects the convenience of human-computer interface.It is the cost-effective brass wire-cut EDM.
Puge number03-04
AE650
AE400 AE1100
AG560-SA
AG360-SA
AG560-SA
Brass wire-cut EDM
AE SERIEScost-effective
AG SERIEShigh precision
Puge number05-06
Convenient operation to achieve higher processing efficiency
· Automatic wire alignment systemWith special algorithm software,it can automatically calculate the movement distance of the upper guide.The operating is simple and practical.Automatically modify upper and lower guide position ensures the hign accuracy taper machining.
· Constant wire tension system
Patented technology. The electrode wire running is controlled by the high accuracy magnetic power clutch.The tension is stable and can be controlled by programming.
· Automatic wire threading system (optional)Automatic cut.Automatic threading.Repeat threading.Move to the next hole and automatic threading.
· Centralized automatic lubrication systemCentralized automatic lubrication system enables proper lubrication for ball screw and guide way regularly.
High efficiency
· Machining preparationThe machine can realize axes move,edge find,corner find, center find,wire alignment,spark alignment automatically,the control of wire running,wire speed,wire tension,machining contact movement,water flushing pressure,feeding and drawing off water of water tank,conductivity.
· Machining optimization Realtimely display the machining status,machining voltage,electro-discharge rate,machining speed.Changing the machining parameters realtimely.Checking the machining time realtimely.
· Erosion monitoring Flexible view operation,with two and three dimensional simulation.Support the zoom and shift of the machining status realtimely.Monitor the machining tracing realtimely.
Intelligent Technology
Puge number07-08
Perfect intelligent technology is only for your convenience
Energy regulationWith the energy regulation module, the current processing energy can be adjusted on time.
Intelligent short circuit treatmentIn case of short circuit, move the electrode wire to the open position and use the function of "machining to M00 or pause point" to make the hole machining easier.
Collision avoidanceSet the positive and negative limits of X/Y axes to achieve the collision protection of software,hardware and mechanical.
Power off memory In the case of accidental power off, the coordinate can be memorized automatically ,start processing automatically at the processing point when the power is restored.
Wire broken processing When the wire broken, it can return to the broken point and continue processing after threading.
Puge number09-10
01 02 03 04
01Consumables: Monitor the status of consumables realtimely.
03File editing: File edit, character edit, including storage, delete, save and butt joint of up and down two shaped NC files.
02Processing database: Powerful database makes it easier to choose processing parameter for the workpiece with the same material and shape.
04Query: You can query the machine operation and maintenance information at any time. Using the help button, query operation and processing application manual, maintenance manual, processing conditions and code manual, etc.
NovickCAD
With corner strategy Without corner strategy
Multifunctional choice, only for easier operation
Completedatabase
Powerful software
Consistent with AutoCAD operation.Using DEG as working document, fully compatible with
AutoCAD 2005-2013 file format.
Automatic programming NC program is generated directly according to the workpiece
material, thickness, diameter, machining times and type,etc.NC program include open-circuit cutting, special-shaped hole, round
hole, coreless cutting, function curve, etc. It has the selection of single and integral machining conditions in porous site machining.
Remote controlConnected to the network through Teamviewerl, users can remotely monitor the machine’s processing status and files
interact. Machining parameters of NC program can be modified during machining.
Corner controlThe system has rich and intelligent corner
strategy.the system will automatically adjust the corner strategy without user's intervention.
The more complex the workpiece shape is and the more corners it has, the more obvious
advantage it has.
Puge number11-12
Bit by bit is just to ensure excellent product quality
Processing applications
Processing control
Machine: AE650
Workpiece material: SKD11
Workpiece dimension: 115mm
Cutting times: 1 main cut+2 trim cuts
Machining accuracy: 0.007mm
Machining time: 400min
Machining taper: 10°
Roughness: Ra0.5μm
Machine: AE400
Workpiece material: SKD11
Workpiece dimension: 55mm
Cutting times: 1 main cut+2 trim cuts
Machining accuracy: 0.004mm
Machining time: 150min
Roughness: Ra0.46μm
Machine: AG360-SA
Workpiece material: SKD11
Workpiece dimension: 24.7mm
Cutting times: 1 main cut+4 trim cuts
Machining accuracy: 0.003mm
Machining time: 180min
Roughness: Ra0.3μm
Machine: AG360-SA
Workpiece material: YG8
Workpiece dimension: 25mm
Cutting times: 1 main cut+6 trim cuts
Machining accuracy: 0.005mm
Machining time: 120min
Roughness: Ra0.2μm
Machine: AG360-SA
Workpiece material: SKD11
Workpiece dimension: 19.2mm
Cutting times: 1 main cut+2 trim cuts
Machining accuracy: 0.005mm
Machining time: 480min
Roughness: Ra0.44μm
Machine: AG560-SA
Workpiece material: Cr12
Workpiece dimension: 19.6mm
Cutting times: 1 main cut+3 trim cuts
Machining accuracy: 0.002mm
Machining time: 78 min
Roughness: Ra0.35μm
Machine: AE650
Workpiece material: SKD11
Workpiece dimension: 50mm
Cutting times: 1 main cut +2 trim cuts
Cooperate clearance: 0.005mm
Machining accuracy: 0.005mm
Machining time: 188min
Roughness: Ra0.413μm
Machine: AG360-SA
Workpiece material: Cr12
Workpiece dimension: 24.7mm
Cutting times: 1 main cut+2 trim cuts
Machining accuracy: 0.003mm
Machining time: 188min
Roughness: Ra0.427μm
Full completion of high-precised detecting instruments at each link during the whole processing secure excellent quality of all NOVICK products !
1 CutRa2.4μm
2 CutRa1.4μm
3 CutRa0.5μm
4 CutRa0.4μm
5 CutRa0.25μm
Puge number13-14
High-quality parts to create greater value
·Imported lead screw and guide railXYUVZ five axis adopts imported high specification φ32mm ball screw and linear guide rail, with imported AC servo drive system, which enables each axis to move sensitive and enables the accuracy to be durable.
· Electrical componentsUsing internationally renowned electrical components makes the machine performance more stable.
·Imported linear scales
(optional)High level of anti-interference, stable and reliable.
· Lower arm water coolsThe lower arm with water-cooled circulating and temperature control device ensures that the thermal balance of the machine is always in the best state, also ensures the machining accuracy.
AC MOSFET high speed non-electrolytic pulse power
Machine: AG360-SA
Workpiece material: YG8
Thickness: 30mm
Brass wire diameter: 0.25mm
High-quality configuration
· High speed non-electrolytic pulse power with alternating polarity is adopted to make the positive and negative ions generated in the processing basically remain in situ, inhibit the occurrence of electrolytic corrosion, prevent the formation of softening layer, and improve the service life of the mold.
· With unique leading finishing module, the 30mm thickness workpiece’s surface roughness can be quickly machined to Ra0.4μm or less.
· Dedicated mirror finishing power supply, the best surface roughness Ra≤0.25μm.
Item Unit AG360-SA AG560-SASize of machine mm 2700×2300×2250 2850×2400×2250
Weight of machine kg 3000 3300
Travels X/Y/Z mm 360×250×210 500×350×300
Travels U/V mm 100×100( with optional AWF:90×90)
Max.cutting taper ±30°/50mm
Size of work tank mm 910×680×260 1120×800×350
Size of worktable mm 650×485 800×585
Max.size of workpiece mm 900×600×210 1000×600×295
Max.weight of workpiece kg 400 500
Type of machining Submerged/Flushing
Diameter of closed wire guide mm φ0.15~φ0.30
Diameter of electrode wire mm 0.15/0.20/0.25/0.30
Dimensions of wire reel mm Max. outside diameter φ160
Wire tension Automatic constant tension
Wire speed mm/s Up to 200
Threading device Optional automatic wire threading device(AWF)
Generator
Max.cutting speed mm²/min 160(φ0.25 brass wire)/250(optional)
Best roughness μm Ra≤0.45(0.25 optional)
Work type AC MOSFET non-electrolytic power
Standard technics Steel,carbide,copper,graphite
CNC control system
Control system CPU
Operation system Windows
Hardware configuration 64G ssd,17″LCD
Input/output interface Keyboard,USB,LAN
Axes controlled XYUVZ axes(4 axes controlled simultaneously)
Memory function With memory function
Power supply system
Standard power supply 3x380V 50/60Hz
Max.machining current A 25
Power input KVA 7
Enviroment requirement
Dampness Avoid the high dampness,the best is 30%~80%.
Temperature The temperature requirement:insure accuracy20℃ ±3℃ ;insure working15-30℃
Personalized customization
1.Machine configuration; 2.machine performance; 3.special functions; 4.personalized color.
Puge number15-16
Item Unit AE400 AE650 AE1100
Size of machine mm 1700×2550×2165 2750×2800×2265 3200×3000×2450
Weight of machine kg 2500 3800 7000
Acreage mm 2200×3100 2900×3500 4300×3100×2500
Travels X/Y/Z mm 400x300x220 650x450x300 1100×700×350
Travels U/V mm 36×36 100x100 120x120
Max.cutting taper ±6°/36mm ±25°/80mm ±25°/50mm
Size of work tank mm 990X910x270 1386X1010x370 1650X1180x350
Size of worktable mm 645X490 920X690 1430X1000
Max.size of workpiece mm 850x700x215 1100x850x295 1300x1000x345
Max.weight of workpiece kg 250 600 2000
Type of machining Flushing
Diameter of closed wire guide mm φ0.15~φ0.30
Diameter of electrode wire mm 0.15/0.20/0.25/0.30
Dimensions of wire reel mm Max. outside diameter φ160
Wire tension Automatic constant tension
Wire speed mm/s Up to 200
Threading device Manual Automatic(optional)
Wire alignment Automatic vertical alignment device
Generator
Max.cutting speed mm²/min 160(φ0.25 brass wire)/210(optional)
Best roughness μm Ra≤0.6
CNC control system
Control system CPU
Operation system Windows
Hardware configuration 64G ssd,17″LCD
Input/output interface Keyboard,USB,LAN
Axes controlled XYUVZ axes(4 axes controlled simultaneously)
Memory function With memory function
Power supply system
Standard power supply 3×380V 50/60Hz
Max.machining current A 25
Power input KVA 7
Enviroment requirement
Dampness Avoid the high dampness,the best is 30%~80%.
Temperature The temperature requirement:insure accuracy20℃ ±3℃ ;insure working15-30℃
Personalized customization
1.Machine configuration; 2.machine performance; 3.special functions; 4.personalized color.
Technical specifications
AG series AE series
About NOVICK
NOVICK(BEIJING) research and development
NOVICK(LANGFANG) production base
2002 Beijing Novick Digital Equipment Co.,Ltd. is established.
2003 Launched "Precise CNC Die-sinking EDM AF series" machines and
"Precise CNC reciprocal wire-cut EDM AR series " machines.
2004 Passed ISO-9000 quality control system.
Launched the internal first set of "Precise CNC Diamond Tools EDM
AT100 machine",and got two patents of invention.
2005 Got the honor of "Beijing high and new tech enterprises".
2007 Build production plant at Gu'an industrial development zone,set up
Langfang Novick Digital Equipment Co.,Ltd.
Launched "Precise CNC Brass wire-cut EDM AW series" machines.
2009 "Precise CNC Brass wire-cut EDM AW series" machines are selected
as the "major national science and technology" project.
"NOVICK" brand is authorized and registered by Chinese SAIC
Trademark Office.
2010 "NOVICK" trademark obtained the registration approved by
intellectual property office in Korea, Thailand, Malaysia, Vietnam,
India,Argentina .
Novick group became the largest export domestic funded enterprise.
2012 Precise CNC Brass wire-cut EDM machine type AW310T gain the "the
second prize of the progress of science and technology of Beijing".
2013 Precise CNC Brass wire-cut EDM machine type AE1100 gain the project
of "precision machine project".
Precise CNC Brass wire-cut EDM machine type AW310T gain the
certificate of the national key new product.
2014 Kunshan Novick Digital Equipment Co.,Ltd.
was set up.Get more than twenty national patents.
2015 Launched "Precise CNC Brass wire-cut EDM AG series" machines.
2016 Launched "Precise CNC reciprocal wire-cut EDM AR-MA series"
machines.
Beijing Novick Digital Equipment Co.,Ltd. Was listed on the New OTC
Market,stock code is 838209.
2018 Precise CNC Brass wire-cut EDM machine type AG360T won
the CHUNYAN award in the 10th China CNC machine tool exhibition
(CCMT2018) .
Puge number17-18
Perfect sales and service network
Adhering to the concept of high-end and efficient,we design high-precision and high-efficiency EDM equipment for you.
· We are professional designers
Adhering to the spirit of craftsmanship,we create high-quality EDM equipment for you.
· We are professional manufacturer
We are professional technical consultants·Adhering to the concept of customer first,we provide you with comprehensive solutions.
We are a professional service team·Adhering to the concept of customer's interests first,we give maintenance services in 24 hours.
Quality service guarantee
Strict quality management system, effective process control, advanced testing methods, sales and service network around the world, with
thoughtful and comprehensive technical services,our machine can create greater benefits for you.
AR-2019-03-14
Novick Intelligent Equipment Manufacturing Co., Ltd.
HQ add : A206, 4#, The kingdee software park, No.3 building, Renaissance 4th street, Mapo, Shunyi, Beijing 101300
FTY add : The South District of Gu'an Development Zone, Langfang,Hebei,China.065500
Tel. : +(86)-316-5922666 +(86)-177 3165 1382Fax : +(86)-316-5922112Email : [email protected] : http://novickglobal.com/
(The catalog is subject to change without announcement in advance.)