Upload
dangdien
View
217
Download
3
Embed Size (px)
Citation preview
Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems
Master Catalogue I August 2011
41
Chemical & Solvent
NDP-15FVT1/2”CHEMICALDIAPHRAGM PUMP
• Suitableforthetransferofhydrochloricacid up to 20% concentration, phosphoric acid, methanol, paint thinners and water
• Maximumflowratesofupto45LPM• 1/2”BSP(f)inletandoutletports• KynarbodyandTeflondiaphragms• TheballvalvemodelNDP-15BVTissuitable for use with solids up to 1mm OD
NDP-40BPT11/2”CHEMICALDIAPHRAGM PUMP
• Suitableforthetransferofpotassiumsulphate,tannic acid, sodium chloride and hydrochloric acid up to 37%
• Maximumflowrateofupto190LPM• Suitableforusewithsolidsupto7mmOD• 11/2”BSP(f)inletandoutletports• PolypropylenebodyandTeflondiaphragms
NDP-20BST3/4”CHEMICALDIAPHRAGM PUMP
• SuitableforthetransferofMEK(methylethylketone),phosphoricacid,methanol,paintthinners and water
• Maximumflowratesofupto100LPM• 3/4”BSP(f)inletandoutletports• StainlesssteelbodyandTeflondiaphragms• Suitableforusewithsolidsupto2mmOD
The PE-038 3/8” air operated
diaphragm pump is supplied inclusive
of the new Max-Pass valving system.
The new valving system makes the
pump suitable for the transfer of high
viscosity and coagulating inks and
adhesives inclusive of solids up to
9mm od. Wetted parts of polypropylene,
santoprene and EPDM make the PE-038
suitable for use with a wide range of
pumpable fluids. The Max-Pass valving
system increases suction lift capacity
by25%andthePE-038has360º
mounting capability.
Other larger models are available for
use with solids up to 19mm OD.
PE-0383/8”AIROPERATEDDIAPHRAGM PUMP
• Maximumflowratesofupto34LPM• 3/8”BSP(f)inletandoutletports• Patentedairvalvewillnotstallatslowspeeds• NewMax-Passvalvingmakesthepumpidealfor
the transfer of high viscosity, coagulating & abrasive fluids inclusive of solids up to 9mm OD
• Wettedpartsofpolypropylene,santopreneandEPDM
• Minimumandmaximumairpressureof20psiand 120psi respectively
• Airsupplyinletportof1/4”NPT(f)• Totaldryliftofupto5.2metres• Maximumoperatingtemperatureof66OC
42
ALEMITE AIR OPERATED5:1RATIOCHEMICALDRUM PUMPS
• 5:1ratiofluidmaterialtransferdrumpumpssuits 205 litre drums
• Flowratesofupto19litresperminute• 1/4”NPT(f)airinlet• 3/4”NPT(f)fluidoutlet• Heavydutyconstruction• Idealforrepetitious,highperformance
manufacturing applications• 7835-DTRsuitableforthetransferofhigh
viscosity inks, glues, adhesives, epoxies, sealants and sound deadeners
• 7835-SDTRsuitableforthetransferofhigherviscosity fluids including detergents, anti-corrosion fluids, wood varnish and adhesives
Part No. Product Description
7835-SDTR 5:1 ratio chemical and solvent drum pump
7835-DTR 5:1 ratio chemical drum pump
Component Materials
7835-SDTR Stainless steel and teflon
7835-DTR Steel and teflon
333120STAINLESS STEEL DRUM PUMP
• 3:1ratiopumpsuits205litredrumsand bulk tanks• Flowratesofupto45LPM• Compatiblewithslightlycorrosive,lowviscosityfluidssuchaspaintsolvents,anti-freeze(glycol),grease removers, alcohols,
petrochemical products and anti-corrosion products• Includesaheightadjustablebungadaptor• 3/8”BSP(f)airinlet• 3/4”BSP(f)fluidoutlet
7216-4ALEMITE AIR OPERATEDCHEMICAL DRUM PUMP
• 1:1ratiopumpsuits205litredrums• Flowratesofupto53LPM• Steel,teflonandnylonIIconstruction• 1/4”NPT(f)airinlet• 1”NPT(f)materialoutlet• Sparepartsreadilyavailable• Adjustablebungadaptorincluded• Suitableforthetransferoflowviscosityfluids
including cosmetics, synthetic resins, solvents, shortenings and low viscosity inks
7216-SS Stainless steel model also available• Flowratesofupto53LPM
Alemite USA’s 7835-DTR is the ideal
drum pump for challenging industrial,
repetitious and highly demanding
applications. The fully divorced air motor
design ensures that aggressive fluids
being transferred cannot contaminate
the air motor when air motor gland
seals wear and the heavy duty 3” air
motor maximises production up time
and minimises costly component
replacement. The 7835-DTR can be
used to transfer, extrude or spray a wide
variety of fluids, chemicals and solvents.
Contact your local Alemlube distributor
now for further information on the
7835-DTR5:1ratiomildsteelpumptube
and teflon sealed drum pump.
331120STAINLESS STEEL DRUM PUMP
• 1:1ratiopumpsuits205litredrumsand bulk tanks• Flowratesupto38LPM• 1/4”BSP(f)airinlet• 3/4”BSP(f)fluidoutlet• Stainlesssteelandvitonconstruction• Suitableforthetransferoflowviscosityfluids
including light inks, lacquer, paint, alcohol and solvents
43
401ARYTON ROTARY DRUM PUMP
• Flowratesofupto20LPM• Rytonandstainlesssteelconstructionprovides
excellent chemical compatibility• Rotaryactionfacilitatesquickandeffortless
fluid transfer• Unique,rotating2piecedischargespout
assists fluid transfer• Suitablefor60or205litredrums• Suitableforthetransferoflowviscosity
chemicals, lacquers and mild acids
733STAINLESS STEEL PUSHPULL DRUM PUMP
• Delivers500mlontheupstroke• 316stainlesssteelbody,outletspoutandpick
up tube and piston with adjustable PTFE seals• Alsofeaturesanadjustableoutletspout• Suitableforthetransferofammonia,ethyl
acetate, methyl acetate and nitric acid up to a 50% concentration
301APOLYPROPYLENE ROTARYDRUM PUMP
• Flowratesofupto20LPM• Polypropylene,teflonandstainlesssteel
construction offer excellent chemical resistance• Unique,rotating2piecedischargespout
assists fluid transfer• Suitablefor60or205litredrums• Suitableforthetransferofherbicides,
pesticides, chemicals and mild detergents
225POLYPROPYLENE SYPHONDRUM PUMP
• Plungeractionsyphonpumpcandeliverup to 20LPM
• Constructedwithapolypropylenepumpheadand a PTE pick up tube
• Includesa875mmpickuptubeanda1.2metredelivery hose
• Adjustmentknobonthetopofthepumpcanbeused to stop the pump from siphoning
925PUSH PULL POLY DRUM PUMP
• Delivers250mlonthedownstroke• Telescopicpickuptubemakesthe925suitable
for 60 or 205 litre drums• Suppliedinclusiveofanon-dripswivelling
delivery nozzle• Suitableforthetransferofpesticides,herbicides,
mild acids, alkalis and detergents
925V With viton seals also available
ALEMLUBELEVER ACTION POLY DRUM PUMPS
• Delivers330mlonthedownstroke• Polyethylenebody,pistonandvalveswithnitrile
seals• Robust-testedtoover2millionstrokes• Telescopicpickuptubemakesthepump
suitable for 60 or 205 litre drums• Suitableforthetransferofpesticides,herbicides,
mild acids and detergents• 950Vwithvitonsealsalsoavailableforthe
transfer of more aggressive fluids
Part No. Product Description
950 Poly pump with nitrile seals
950V Poly pump with viton seals
44
410000 CHEMICAL PULSE METER
•Turbinetypepulsemeterinclusiveofdisplay• Stainlesssteelbodyandpolypropyleneturbine
makes the meter suitable for a wide range of chemicals and solvents
•Accurateto±1%•Accuratebetweenflowratesof4to40LPM•Maximumworkingpressureof420psi• Operatingtemperaturerangebetween-10ºCto+50ºC
• Ruggedstainlesssteelhousingandsealed circuit baord ensure dependable operation in almost all operating conditions
FM530GPI MECHANICAL HIGH VOLUME 11/2”FUELMETER• Flowratesofupto114LPM• 11/2”BSP(f)inletandoutletports• Suitableforusewithdieselfuel.petroland
kerosene• Fieldcalibrationpossibletomeasureavariety
of fluids or to adjust for differences in viscosity and flow rates
•Largeeasytoreaddisplay• Builtinfilterhelpsprotectagainstforeign
particle contamination
630010MANUAL PLASTIC NOZZLE
• Moldedbodyandsealsmakethenozzle suitable for use with water and some food grade fluids
•Flowratesofupto80LPM• Inlethosetailconnectionfor3/4”ODhose• Equippedwithleverprotectionanda
removable trigger lock•Externalspoutdiameterof34mm•Weightof0.2kg• Alsosuitableforthetransferofdieselfuel,
unleaded petrol, oil and AdBlue®
45
www.alemlube.com.au [email protected]
Specifications subject to change without prior notice. ©2011 Alemlube Pty Ltd MC-0811Formerly Alemite Lubrequip
Head Office22 Green StreetBrookvale NSW 2100Phone: 02 9938 2999Fax: 02 9938 6605
Queensland/PNGUnit 1 / 19 Hinkler CourtBrendale QLD 4500Phone: 07 3889 8480Fax: 07 3889 8490
New South Wales15 Green StreetBrookvale NSW 2100Phone: 02 9939 0711Fax: 02 9939 0411
Western Australia31 Resource WayMalaga WA 6090Phone: 08 9209 3066Fax: 08 9209 3933
New ZealandUnit 2/43 William Pickering DriveAlbany Auckland NZ Phone: 09 447 1007Fax: 09 447 1008
Victoria/Tasmania31-33 Cyber LoopDandenong VIC 3175Phone: 03 8787 8288Fax: 03 8787 8266
South Australia/Northern TerritoryUnit 2/91 Harrison RoadDudley Park SA 5008Phone: 08 8241 7111Fax: 08 8241 7011