Marlite FRP - The mostspecified brand in the world.

StainResistant

ImpactResistant

WaterResistant

ScratchResistant

FireRated

The Industry Standard for FRP!

What is Fiberglass Reinforced Plastic (FRP)?

Panel Information

FRP Panel Sizes

Class C Fire-rated:Standard Panel Sizes – 4’x8’

Panel Thickness – 3/32” or .090” (nominal)

FRP Ceiling PanelsFRP P100CP White

Size - 2’x4’x.090” (Class C)

2’x2’x.090” (Class C, Class A)

FRP P100CP w/Gypsum

Size - 2’x4’x23/32” (Class A).090“ FRP laminated to 5/8”fire rated Gypsum

4’x9’* (select finishes)4’x10’4’x12’ (P100 White Only)

FRP is a homogeneous mixture of fiberglass, calcium carbonate, and resin. Available in pebble textured and smooth surfaces, FRP provides great durability for high wear and even moist environments. It’s economical to install, easy to maintain and a breeze to sanitize over and over again.

(class C fire rating)

Class A Fire-rated:Standard Panel Sizes – 4’x8’

Panel Thickness – 3/32” or .090” (nominal)

4’x9’* (P100 White Only)4’x10’

(class C fire rating)

Marlite Standard FRP is GREENGUARD Children & Schools

Certi�ed for low chemical emissions

Pebbled (*available in 4’ x’9’ x3/32”)

Smooth

Finishes

P 100 WhiteClass C*Class A*

P199 Bright White*Class C*Class A

P 118 Natural AlmondClass C*Class A

P 145 SilverClass C*Class A

P 106 BeigeClass CClass A

P 140 IvoryClass C*Class A

P 807 BlackClass C

S 100 S/2/S WhiteClass C

S 100G WhiteClass C

S 118G AlmondClass C

S 870N Smooth BlackClass C

S 490N Light GreyClass C

P 440N BiscuitClass C

P 151 Light GreyClass C*Class A

P 430N Medium GreyClass C

P 470N Dark GreyClass C

SERVICEWALL

PANELS

Trim Options

LIT-FRP-202101e�ective date: 01/31/21copywrite 2021

www.marlite.com(800) 377-1221

Installation

Base Moldings & Corner Guards

Follow us on:

Anodized Aluminum Trim PVC Trim

Inside CornerA550

Outside CornerA560

DivisionA565

EdgeA570

Outside CornerM360

Inside CornerV177 135°

End CapsM625 RHM620 LH

Outside CornerV179 135°

Inside CornerM350

EdgeM370

DivisionM365

Base CoveV65 3”

PVC Base Molding4” wide x 10’ long

Outside CornerM660

Inside CornerM651

Butt Joint ConnectorIncluded with Base

Molding Strips

Stainless CornerGuard

F560SS

PVC OutsideCorner Guard

M961

Apply Marlite BrandAdhesive to the back ofpanels and apply them

to a subwall.

FRP Panels can beeasily cut with a

table saw.Adhesives(3.5 gallon cans) C-915 AdhesiveAdv Polymer AdhesiveC-551 Adhesive

Sealants(10oz. Cartridge) MS-250 ClearMS-251 WhiteColor MatchedAdhere panel to

subwall.Slide division molding

under edge of firstpanel.

Staple division moldingto subwall alongresealed edge.

Adhere second panelin place and repeat.

Installation with Seam Joint