Marketed and Distributed by: Absolute Distribution, Inc. AS&D™ … · 2020-03-09 · Please contact ADI customer service. 149 Marketed and Distributed by: Absolute Distribution,

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™

*Asterisk denotes NON STOCK special order. Please contact ADI customer service.142

Marketed and Distributed by: Absolute Distribution, Inc.Ph: 1-800-335-5909 • Fax 1-800-203-4495 • www.absolutedist.com

142


ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS

AS&D™ Aluminum Rail with Cable

Rail Guidelines To comply with engineering and testing posts must be spaced no more than 50” on center. Cables are spaced

a 90 degree corner and/or a 45 degree turn. Cable can either terminate at the corner or run continuously through

PostsAS&D™ posts for level and stair railings are all predrilled and ready for cable installation. Stairs posts do not come with base plates attached so posts can be placed and mounted where desired for maximizing installation

Top RailsThere are 3 styles of top rail that AS&D™ railing utilizes: Series 200addition of a secondary handrail system.Series 100

Series 400

Available Colors:

Double Posts for Corners Over-the-Post

Top Rail

Pre-Drilled End Post

Pre-Drilled Intermediate Post

3-3/16”Cable

Spacing

48” Maximum Between Posts

Rail OverviewManufactured in the USA using aircraft grade aluminum, AS&D™ Aluminum Rail and Cable System has been

framework and stainless steel cable allows for railings to be lightweight, while still retaining exceptional durability.

Anodized (Silver) Black Bronze White

Colors shown are approximate representation

AS&D™ Railing System Overview

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™

*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 143


143


ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERSAS&D™ - Aluminum Rail System for Cable Railing

Cable Railing Kits for Aluminum RailOutside of Post to Outside of Post Rail Kit - AluminumRail System for 2-3/8” Posts

Sold in kits.Cable railing kit, made in USA from 1/8” high quality 316 grade stainless steel. Includes 1 strand of cable with one swedged end, applicable washers, Invisiware® receiver, Pull-Lock™ end fitting and end cap. Minimum 3” clearance between end post and structure is required.

Item #: 22405Item #: 22410Item #: 22415Item #: 22420Item #: 22425Item #: 22430Item #: 22440Item #: 22450Cable Kits Over 50’ - Contact Customer Service

224 SERIES

INVISIWARE® RECEIVER

PULL-LOCK™ END FITTING

AS&D™ Aluminum Rail and Cable - Anodized - Series 200 Top Rail

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



144



AS&D Series 200 Top Rail

8’ - Series 200 Top Rail - Walnut WoodgrainSold in any quantity.

Join multiple rails together with splices to achieve any length required.

clean look. End plate sold separately.

Item #: ASTR200WAL8KIT

WalnutWoodgrain

Available in:

Series 200 Top Rail End PlateSold in any quantity.

Aluminum end plate required to cap series 200 top rail ends for a

Item #: ASEP200ANO - AnodizedItem #: ASEP200BLK - BlackItem #: ASEP200BRN - BronzeItem #: ASEP200WHT - WhiteItem #: ASEP200WAL - Walnut Woodgrain

Anodized

Black

Bronze

White

WalnutWoodgrain

Available in:

Series 200 Top RailSold in any quantity.

together with splices to achieve any length required. Field trimmable

End plate sold separately.

8’ Top Rail (3-1/2” x 1-7/8” x 8’)Item #: ASTR200ANOKIT8 - AnodizedItem #: ASTR200BLKKIT8 - BlackItem #: ASTR200BRNKIT8 - BronzeItem #: ASTR200WHTKIT8 - White

Anodized

Black

Bronze

White

Available in:

←

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



145



AS&D Series 200 Rail SplicesStraight Splice

Sold in any quantity.

9” long splice joins straight sections of series 200 top rail to make any length run. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)

Item #: ASSPL200 - Straight Splice

Aluminum

Available in:

90 Degree SpliceSold in any quantity.

Splices top rails to make a 90 degree angle for series 200 top rail. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)

Item #: ASSPL20090 - 90 Degree Splice

Aluminum

Available in:

135 Degree SpliceSold in any quantity.

Splices top rails to make a 135 degree angle for series 200 top rail. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)

Item #: ASSPL200135 - 135 Degree Splice

Aluminum

Available in:

Notched Splice for StairsSold in any quantity.

For continuos level to stair transition. Bends to accommodate any angle from 0o - 38o. Requires miter cutting of top rail. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)

Item #: ASSPLST - Notched Splice

Aluminum

Available in:

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



146



AS&D Series 100 Graspable Top Rail for Stair & Level Applications

AS&D™ Aluminum Rail and Cable - Black - Series 200 (Level) Series 100 (Graspable Stair)

Series 100 Top Rail for StairsSold in any quantity.

for mounting over the post. End plate sold separately.

8’ Top Rail (96”)Item #: ASTR100ANO8KIT - AnodizedItem #: ASTR100BLK8KIT - BlackItem #: ASTR100BRN8KIT - BronzeItem #: ASTR100WHT8KIT - White

Anodized

Black

Bronze

White

Available in:

←

Series 100 Top Rail End PlateSold in any quantity.

Aluminum end plate required to cap series 100 top rail ends for a

Item #: ASEP100ANO - AnodizedItem #: ASEP100BLK - BlackItem #: ASEP100BRN - BronzeItem #: ASEP100WHT - White

Anodized

Black

Bronze

White

Available in:

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



147



Intermediate Post Fitting (IPF)Sold in any quantity.

Used on stair posts for over the post mounting style of series 100 top rail. Fitting attaches to the top of post and allows for top rail to be installed at any angle. Measures 3/4”W x 1-1/2”L x 2”H. Includes 2 ea. screwsfor post attachment.

Item #: ASIPFSETANO - AnodizedItem #: ASIPFSETBLK - BlackItem #: ASIPFSETBRN - BronzeItem #: ASIPFSETWHT - White

Anodized

Black

Bronze

White

Available in:

AS&D™ Aluminum Rail and Cable - Anodized - Series 200 (Level) Series 100 (Graspable Stair)

Rail Connector BlockSold in any quantity.

Used to terminate series 100 top rail into post. 12” connector block can be cut into smaller blocks at angle of the stair. It can also be used to splice series 100 top rail together. When splicing, use 8 color matched screws to secure in place (sold separately). Can be used for level and stair applications. Screws included.

Item #: ASRCB1 - 1” Connector Block - Level (2 Screws)

Item #: ASRCB12 - 12” Connector Block / Splice (6 Screws)

Aluminum

Available in:

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



148



AS&D Series 400 Top Rail

AS&D™ Aluminum Rail and Cable - Anodized - Series 400 w/ Wood Cap Rail

Anodized

Black

Bronze

White

Available in: Series 400 Top Rail for Wood Cap RailSold in any quantity.

Series 400 aluminum rail cap for attaching wood/composite top rail.

Top rail is NOTto allow for the attachment of a wood or composite cap rail with the intent that the wood or composite rail will add structural integrity. Cap rail MUST add 1” to overall rail height to reach required rail heights for both 36” and 42” rails.

8’ Top Rail (2” x 1-5/8” x 8’)Item #: ASTR400ANO8KIT - AnodizedItem #: ASTR400BLK8KIT - BlackItem #: ASTR400BRN8KIT - BronzeItem #: ASTR400WHT8KIT - White

←

*Wood cap rail not included

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



149



Internal Post Brace (IPB)Sold in any quantity.

Internal post brace can be used as a splice for Series 400 top rail. Simply cut IPB to desired length and install from underneath to create a strengthened connection.

Item # ASEPIF36 - 32” length Item # ASEPIF42 - 40” length

TR400 - 90o Splice

Underside

•• • •

• •

TR400 - 45o Splice.

•• • •

Underside

• •

TR400 - Straight Splice

• • • •

Underside

• • • •

• •

AS&D™ Aluminum Rail and Cable - Anodized - Series 400 w/ Cap Rail

Color Matched ScrewsSold in 100 Pack.

#10 - 3/4” phillips head screw attach top rail to posts, attach cap rail to series 400 top rail and can be used for splices.

Item #: ASSCREWBLKW805 - BlackItem #: ASSCREWBRNW805 - BronzeItem #: ASSCREWWHTW805 - WhiteItem #: ASSCREWSSW805 - Stainless Steel

Black

Bronze

White

Stainless Steel

Available in:

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



150



AS&D Surface Mount PostsSurface Mount End Post - Pre-Drilled


2-3/8” Square surface mount post with 5” base plate. Base plate holes for fasteners are 3/8”. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fasteners and caps for mounting base plate to deck sold separately.

36” Rail Height (2-3/8” x 35”)Item #: ASCEP200ANO35 - AnodizedItem #: ASCEP200BLK35 - BlackItem #: ASCEP200BRN35 - BronzeItem #: ASCEP200BWHT35 - White

42” Rail Height (2-3/8” x 41”)Item #: ASCEP200ANO41 - AnodizedItem #: ASCEP200BLK41 - BlackItem #: ASCEP200BRN41 - BronzeItem #: ASCEP200WHT41 - White

Anodized

Black

Bronze

White

Available in:

Surface Mount Intermediate Post - Pre-DrilledSold in any quantity.

2-3/8” Square surface mount post with 5” base plate. Base plate holes for fasteners are 3/8”. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fasteners and caps for mounting base plate to deck sold separately.

36” Rail Height (2-3/8” x 35”)Item #: ASCIP200ANO35 - AnodizedItem #: ASCIP200BLK35 - BlackItem #: ASCIP200BRN35 - BronzeItem #: ASCIP200WHT35 - White

42” Rail Height (2-3/8” x 41”)Item #: ASCIP200ANO41 - AnodizedItem #: ASCIP200BLK41 - BlackItem #: ASCIP200BRN41 - BronzeItem #: ASCIP200WHT41 - White

Anodized

Black

Bronze

White

Available in:

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



151



AS&D Mounting Brackets and Hardware

RED item numbers denote NON STOCK special order. Please allow for 2 - 3 week lead time.

Base Plate with ScrewsSold in any quantity.

5” x 5” x 3/8” Aluminum base plate used for custom post applications. Base plate holes for fasteners are 3/8”. Can be used to convert fascia posts to surface mount post for stair applications. Includes 4 ea. 5/16” x 2” stainless steel screws - Use T25 torx head for installation.

Item #: ASBPANOKIT - AnodizedItem #: ASBPBLKKIT - BlackItem #: ASBPBRNKIT - BronzeItem #: ASBPWHTKIT - White

Item # ASDINSTKIT - Post Base Install Kit

Anodized

Black

Bronze

White

Available in:

Angle / Knee Wall Base Plate with ScrewsSold in any quantity.

5” x 5” x 3/8” Slotted, adjustable aluminum base plate used for knee wall applications with an angle of 32o - 38o. Base plate holes for fasteners are 3/8”.Includes 4 ea. stainless steel bolts. Use T25 torx head 5/16” x 2”

Item #: ASBPKWANOKIT - AnodizedItem #: ASBPKWBLKKIT - BlackItem #: ASBPKWBRNKIT - BronzeItem #: ASBPKWWHTKIT - White

Item # ASDINSTKIT - Post Base Install Kit

Anodized

Black

Bronze

White

Available in:

Pre-Drilled Post for Stair ApplicationsSold in any quantity.

2-3/8” Square Pre-drilled stair post for cable system. Due to many variables in stairs, these posts do not come with base plate attached. This allows post to be placed, adjusted and mounted where desired. Stair post holes are slotted and drilled at 3-3/16” on center and offset to allow cables to pass through at the angle of the stair. 46” length allows post to be cut to appropriate height.

36” Rail Height (2-3/8” x 46”)Item #: ASFMSCIP200ANO46 - AnodizedItem #: ASFMSCIP200BLK46 - BlackItem #: ASFMSCIP200BRZ46 - BronzeItem #: ASFMSCIP200WHT46 - White

Requires Base Plate for Surface Mounting

Anodized

Black

Bronze

White

Available in:

Screw bosses allow forbase plate attachment

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



152



AS&D Fascia Mount Posts and Brackets

RED item numbers denote NON STOCK special order. Please allow for 2 - 3 week lead time.

Fascia Mount Intermediate Post - Pre-DrilledSold in any quantity.

2-3/8” Square fascia mount post for cable system. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fascia brackets sold separately.

36” Rail Height (2-3/8” x 46”)Item #: ASFMCIP200ANO46 - 46” AnodizedItem #: ASFMCIP200BLK46 - 46” BlackItem #: ASFMCIP200BRN46 - 46” BronzeItem #: ASFMCIP200WHT46 - 46” White

42” Rail Height (2-3/8” x 52”)Item #: ASFMCIP200ANO52 - 52” AnodizedItem #: ASFMCIP200BLK52 - 52” BlackItem #: ASFMCIP200BRN52 - 52” BronzeItem #: ASFMCIP200WHT52 - 52” White

Anodized

Black

Bronze

White

Available in:

Fascia Mount End Post - Pre-DrilledSold in any quantity.

2-3/8” Square fascia mount post for cable system. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fascia brackets sold separately.

36” Rail Height (2-3/8” x 46”)Item #: ASFMCEP200ANO46 - 46” AnodizedItem #: ASFMCEP200BLK46 - 46” BlackItem #: ASFMCEP200BRN46 - 46” BronzeItem #: ASFMCEP200WHT46 - 46” White

42” Rail Height (2-3/8” x 52”)Item #: ASFMCEP200ANO52 - 52” AnodizedItem #: ASFMCEP200BLK52 - 52” BlackItem #: ASFMCEP200BRN52 - 52” BronzeItem #: ASFMCEP200WHT52 - 52” White

Anodized

Black

Bronze

White

Available in:

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



153



Fascia Bracket - Outside CornerSold in any quantity.

For mounting 2-3/8” posts to deck fascia. This bracket is required to maintain 4” spacing on outside corners. Bracket offsets post 1” out from fascia. Mounting hardware is not included. Use 4 fascia screws to secure post in bracket and 4 lags or carriage bolts to secure bracket to fascia.

Item #: ASFMOCB200ANO6 - AnodizedItem #: ASFMOCB200BLK6 - BlackItem #: ASFMOCB200BRN6 - BronzeItem #: ASFMOCB200WHT6 - White

Item # ASSSFS - 1” Fascia Screw

Anodized

Black

Bronze

White

Available in:

6” Fascia BracketSold in any quantity.

For mounting 2-3/8” post to deck fascia. Bracket offsets post 1” out from fascia. Mounting hardware is not included. Use 4 fascia screws to secure post in bracket and 4 lags or carriage bolts to secure bracket to fascia.

Item # ASFMIPB200ANO6 - AnodizedItem # ASFMIPB200BLK6 - BlackItem # ASFMIPB200BRN6 - BronzeItem # ASFMIPB200WHT6 - White

Item # ASSSFS - 1” Fascia Screw

Anodized

Black

Bronze

White

Available in:

Pre-Drilled - Fascia Mount Stair PostSold in any quantity.

2-3/8” Square fascia mount post for use as an intermediate stair post. Stair post holes are slotted and drilled at 3-3/16” on center and offset to allow cables to pass through at the angle of the stair. Fascia brackets sold separately.

36” Rail Height (2-3/8” x 46”)Item #: ASFMSCIP200ANO46 - AnodizedItem #: ASFMSCIP200BLK46 - BlackItem #: ASFMSCIP200BRZ46 - BronzeItem #: ASFMSCIP200WHT46 - White

Undrilled Post (2-3/8” x 52”)Item #: ASFMP200ANO52 - AnodizedItem #: ASFMP200BLK52 - BlackItem #: ASFMP200BRZ52 - BronzeItem #: ASFMP200WHT52 - White

Undrilled posts allow custom drill holeplacement for unique installations

Anodized

Black

Bronze

White

Available in:

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



154



AS&D Accessories

Color Matched ScrewsSold in 100 Pack.

#10 - 3/4” phillips head screw attaches top rail to posts, and also used for splices.

Item #: ASSCREWBLKW805 - BlackItem #: ASSCREWBRNW805 - BronzeItem #: ASSCREWWHTW805 - WhiteItem #: ASSCREWSSW805 - Stainless SteelItem #: ASSCREWWALW805-1 - Walnut Woodgrain (sold as eaches)

Black

Bronze

White

Stainless Steel

WalnutWoodgrain

Available in:

Bolt Cap w/ Stainless Steel Cup WasherSold in any quantity.

Item #: ASBOLTCAPANOKIT - AnodizedItem #: ASBOLTCAPBLKKIT - BlackItem #: ASBOLTCAPBRNKIT - BronzeItem #: ASBOLTCAPWHTKIT - White

Anodized

Black

Bronze

White

Available in:

5” Stainless Steel Lag Screw for Post BaseSold in any quantity.

5” x 3/8” Lag used to attach post base to deck or for mounting fascia bracket.

Item #: ASSCREWLAG5

Stainless Steel

Available in:

Stainless Steel

Available in: Fascia Bracket ScrewsSold in any quantity.

#14 x 1” Hex head stainless steel fascia bracket screw. Use for securing post to fascia bracket. Requires 4 per bracket.

Item #: ASSSFS - Fascia Screw

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



155



Internal Post Brace (IPB)Sold in any quantity.

Internal post brace is used to strengthen AS&D end posts where cable tensioning is being applied. Can also be used as a splice for unique angles in the Series 200 top rail or as a splice for Series 400 top rail

Item # ASEPIF36 - 32” length Item # ASEPIF42 - 40” length

Touch-Up PaintSold in any quantity.

Touch up paint available to cover up scratches and cuts from installation.

Spray Can

Item #: ASPAINTBLK - BlackItem #: ASPAINTBRN - Bronze Item #: ASPAINTWHT - White

Paint Pen

Item # 660368 - BlackItem # 300734 - White

Black

Bronze

White

Available in:

Fascia Mount Post CapSold in any quantity.

to post.

Item #: ASPCANO - AnodizedItem #: ASPCBLK - BlackItem #: ASPCBRN - BronzeItem #: ASPCWHT - White

Anodized

Black

Bronze

White

Available in:

EFFEX LED Vertical Post Light is great for illuminating decks or walkways. Includes 2 ea. 2.8 wattsMeasures 3-1/2”H x 1-3/4”W x 7/8”T. Light color - 3500.

Item # DPPLABT - Absolute Black (Textured)Item # DPPLCBT - Cocoa Bronze (Textured)Item # DPPLDWT - Dream White (Textured)Item # DPPLSIL - Silver


DekPro EFFEX Vertical Post Light for AS&D PostAbsolute Black

Cocoa Bronze

Dream White

Silver

Available in:

See pages 242-243 for power and wiring options

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



156



1-1/2” Round Aluminum Handrail - Textured

secondary handrail system. Installs with screws or adhesive.

Item # PR1596SHRABT - Textured BlackItem # PR1596SHRCBT - Textured BronzeItem # PR1596SHRDWT - Textured WhiteItem # PR1596SHRSILVER - Silver


8’ - Straight Round HandrailBlack

Bronze

White

Silver

Available in:

Returns 1-1/2” round handrail into post or wall. Works for any surface 2” or wider. Includes a handrail splice kit to connect to rail and color matched screws. Installs with screws or adhesive.

Item # PRSHRQRABTKIT - Textured BlackItem # PRSHRQRCBTKIT - Textured BronzeItem # PRSHRQRDWTKIT - Textured WhiteItem # PRSHRQRSILVERKIT - Silver


Universal Quick Return Bracket KitBlack

Bronze

White

Silver

Available in:

Attaches 1-1/2” round handrail to post or wall. Includes color matched

Item # PRSHRMRBKTABT - Textured BlackItem # PRSHRMRBKTCBT - Textured BronzeItem # PRSHRMRBKTDWT - Textured WhiteItem # PRSHRMRBKTSILVER - Silver

Sold in any quantity.Universal Mid-Rail Bracket

Black

Bronze

White

Silver

Available in:

When Series 200 or 400 top rails are used on stairs that require secondary/graspable handrail

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



157



Attaches 1-1/2” round 90o elbow inside corner rail to corner of post. Includes color matched screws.

Item # PRSHRINSIDECBKTABT - Textured BlackItem # PRSHRINSIDECBKTCBT - Textured BronzeItem # PRSHRINSIDECBKTDWT - Textured WhiteItem # PRSHRINSIDECBKTSILVER - Silver

Sold in any quantity.Inside Corner Bracket

Black

Bronze

White

Silver

Available in:

90 degree rail used for inside and outside corner applications. Requires a straight handrail splice at each end. (Sold Separately). Each side has 12” of rail. Installs with screws or adhesive.

Item # PRSHRINSIDECABT - Textured BlackItem # PRSHRINSIDECCBT - Textured BronzeItem # PRSHRINSIDECDWT - Textured WhiteItem # PRSHRINSIDECSILVER - Silver

Sold in any quantity.90o Elbow - Inside / Outside Corner

Black

Bronze

White

Silver

Available in:

Splice kit joins straight 1-1/2” round handrail sections. Kit includes 1 splice and 1 splice ring. Splice ring is used to conceal the connection point. Installs with screws or adhesive.

Item # PRSHRSPLICEABTKIT - Textured BlackItem # PRSHRSPLICECBTKIT - Textured BronzeItem # PRSHRSPLICEDWTKIT - Textured WhiteItem # PRSHRSPLICESILVERKIT - Silver

Sold in any quantity.Handrail Splice Kit

Black

Bronze

White

Silver

Available in:

Connector kit joins 1-1/2” round handrail sections to allow for multi-angle connections to be made. Typically used for stair applications. Kit includes 1 multi-angle connector, 2 splices, and 2 splice rings. Installs with screws or adhesive.

Item # PRSHRUAABTKIT - Textured BlackItem # PRSHRUACBTKIT - Textured BronzeItem # PRSHRUADWTKIT - Textured WhiteItem # PRSHRUASILVERKIT - Silver

Sold in any quantity.Multi-Angle Handrail Connector Kit

Black

Bronze

White

Silver

Available in:

180 degree handrail end loop is used to extend beyond post and return back to post. Requires a handrail splice and 2 brackets to complete installation. Installs with screws or adhesive.

Item # PRSHRPLOOPABT - Textured BlackItem # PRSHRPLOOPCBT - Textured BronzeItem # PRSHRPLOOPDWT - Textured WhiteItem # PRSHRPLOOPSILVER - Silver

Sold in any quantity.P-Loop Return - ADA Compliant

Black

Bronze

White

Silver

Available in:

A

lum

inu

m R

aili

ng

an

d C

able

Sys

tem

AS&

D™



158



AS&D Rail w/ Secondary Handrail - Anodized

Finishes end of handrail if not attaching back to post. Installs with screws or adhesive.

Item # PRSHRENDCAPABT - Textured BlackItem # PRSHRENDCAPCBT - Textured BronzeItem # PRSHRENDCAPDWT - Textured WhiteItem # PRSHRENDCAPSILVER - Silver

Sold in any quantity.End Cap

Black

Bronze

White

Silver

Available in:

Sold in 11 oz. spray can or .3 oz paint pen to touch up rails.

Spray Can (11 oz):

Item # PRPAINT12ABT - BlackItem # PRPAINT12CBT - BronzeItem # PRPAINT12DWT - White

Sold in any quantity.Prestige Touch Up Paint

Paint Pen: Item # PRPAINTPENABT - BlackItem # PRPAINTPENCBT - BronzeItem # PRPAINTPENDWT - White

Black

Bronze

White

Available in:

Alu

min

um

Rai

lin

g a

nd

Cab

le S

yste

m

A

S&D

™



159



AS&D™ Fascia Mount Rail w/ Cable - Black

AS&D™ Rail & Cable w/ Existing Columns - Black

AS&D™ Rail & Cable w/ Series 200 Top Rail - Black

AS&D™ Aluminum Rail & Cable - Anodized

Documents

Marketed and Distributed by: Absolute Distribution, Inc. AS&D™ … · 2020-03-09 · Please contact ADI customer service. 149 Marketed and Distributed by: Absolute Distribution,