Marina Frapa Service

YACHT SERVICEQUALITY AND CONFIDENCE WITHIN YOUR REACH

LAGUNA TRADE d.o.o.Marina FrapaUvala Soline 1, 22 203 ROGOZNICATelefon: +385 (0) 22 55 99 48Telefon: +385 (0) 22 55 99 98Fax: +385 (0) 22 55 99 [email protected]/MarinaFrapaCroatia

The marina Frapa is certainly one of the most beautiful and best equipped marinas of the Mediterranean. It is located in the central part of the Croatian coast between Šibenik and Split, in the very heart of Dalmatia in Rogoznica, in the lovely bay of Soline, protected from all directions.

Dalmatia is geographically the largest and most developed tourist region with a variety of facilites for vacancy, recreation and fun. Due to the seadily improving traffic connections Dalmatia is becoming a very popular tourist destination. This is a region that exudes with the Mediterranean and cherishes the old culture and history of the Croatian people.For the upcoming winter season we recommend from our wide range our service. We will point out all necessary works on boats that have to be organized in time to preserve the boats and keep them in a good condition during the winter period and lower temepratures.The offer of the marina Frapa service offers various solutions, which depend on the type and needs of the particular boat.

The recommendations for boats that are on the sea are a monthly engine and generator starting, doing this the batteries of the boat are also charged, while the recommendation for boats that hibernate on land is the conservation of the engine and charging of the batteries. The boat batteries can be charged in the marina Frapa service and/or directly on board.

The marina Frapa service will assign a responsible person – employee of the marina Frapa service for the works of engine starting or charging the boat batteries, who will take care of your boat for the entire duration of the works. The responsible person will also have the responsibility to control the bilge, check the winter awnings and ventilate the boat and all this with no extra charge.

Manufactureres of engines with a high power require a regular and provided maintenance and controlling, cleaning and/or replacement of certain devices, depending on the number of working hours or after a certain period of time. A detailed inspection of the engine bay and other devices is usually done during the winter period. It is very important to make a list of all necessary winter works, to start and organize in time, which gives a guarantee for the further functioning of the boat engine and other and the boat is prepared for the summer season in time.

If there is a malfunction of the engine or some other device in the engine bay of your boat from the past, the winter period is the right time to rectify all defects and faults and prepare the boat in time for the next season.

The marina Frapa service has 30 permanent employees with long-time experience in the maintenance of boats and they guarantee a high quality for the services. The ordered service works are performed by authorized employees of the marina Frapa service in specialized areas, taking care of the environment and meeting all requirements in the disposal of waste water, oils, lubricats, batteries and fuel.

It is difficult to describe in a few words the works which are recommended for one of the boats, because of the difference in the engines, the drive systems and devices of the boat. The expert team of the marina Frapa service is always on your disposal for any recommendations, works or additional questions and will be pleased to take care of your boat and make it possible for you to use it already on the first day of your vacations.

Please find attached a brief overview of our services with a check list for the ordering of service works.Service works can be arranged or ordered by filling out the form „Boat data“ and checking the list of selected service works.

If you fill out this form in digital format, please tick on the required services and if the check list is printed please checkmark the required services and we will send you an offer for this required services. We especially would like to mention that we are giving a 100% guarantee for all performed work.


Lubricate and protect the stern winches

Control and storage of the passerelles

Polishing and conservating the stainless steel

Deck polishing

Protecting with wax

Replacing the ropes

Painting and polishing the wooden balustrades and wooden beams

Reparing the fiberglass

SAILS, MASTS AND ROPESDemontage and montage of the sails

Servicing and reparing the sails

Washing the sailes

Storing the sails

Visual inspection of the mast

Demontage and montage of the mast

Cleaning and checking the sheets and halyard

Replacing the ropes

Checking and lubricating the winches and stoppers

Checking the shroud tensioner, roll genoa and the mainsail

Checking the instruments for wind direction and speed

Checking the stern hydraulic tensioner

Checking the terminal (fixing points of the shrouds and other)

WORKS ON THE FLY-BRIDGEExternal cleaning

Cushion washing and storaging them in a closed space

Washing and desalting the storage

Washing and polishing the sink

Washing the awnings - bimini

Washing the fridge and protecting the rubber seal with Vaseline grease

Lubricating and spraying the contacts of the control panel

Crane service

Controling the hydraulic of the rudder

Polishing and conservating the stainless steel for the winter

Washing the teak

Service of the navigation and communication equipment

WORKS ON DECKDeck washing

Washing and coating teak

Montage of the winter awnings and demontage of the summer awnings, bimini and sprayhood

Washing the awnings

Washing the tender boat and fenders

Storaging the rubber boat and jet ski in the workshop

Cushion washing and storaging

Cleaning and desalting the storage and everthing in it

Washing the bow sprocket, the chain store, the chain, conservation of the winch – checking the hydraulics

Side door, door of the crew and door of the stern storage – lubircate and protect the keders with Vaseline

CHECK

LIST

FOR

THE

ORDER

OF

SERVICE

WORKS

SERVICE WORKS ON THE BOAT


RESCUE EQUIPMENTChecking the liferaft, maintenance if required

Checking the lifejackets, maintenance if required

Checking the equipment for danger signals

WORKS IN THE CREW CABINWashing cabins, storage under the beds and bilge

Cleaning the air-conditioner – filter and antibacterial treatment

Cleaning the toilets

Checking and repairing the furniture

Washing the bedclothes and make the beds

Washing the carpets

Dry wash of the upholstered furniture

Checking the electrical installation and lighting

WORKS IN THE SALOON AND KITCHENWashing the saloon and kitchen


Cleaning the filter of the hood in the kitchen


Cleaning and washing the fridge and ice maker

Cleaning the cooker and sink

Checking and servicing the dishwasher

Checking and servicing the taps and drain

Checking and servicing the hydrophor of the water pumps

Washing the carpets



Purchase groceries

WORKS IN THE OWNER´S CABIN AND GUESTS CABINSWashing cabins, storage under the beds and bilge


Cleaning the toilets


Washing the bedclothes and make the beds

Washing the carpets



Arranging flowers and fruit

CHECK

LIST

FOR

THE

ORDER

OF

SERVICE

WORKS


Control of the alarm and the unit for the automatic shutdown of the engine

Control and charging of all bateries on board

Washing and desalting the bilge

Painting the bilge

Disinfection of the water tank, disinfection of the sewage tank

Cleaning and emptying the fuel tank

Cleaning and emptying the sewage tanks and disinfection of them

Servicing the anti-fire system

WORKS IN THE ENGINE BAYService, conservation and deconservation of the engine and clasps, the S drive, Z drive

Service, conservation and deconservation of the generator, replacement of zinc

Service, conservation and deconservation of the outboard motor

Service, conservation and deconservation of the jet ski

Service and repair of the desalinator

Service and repair of the air-conditioner, the unit for heating and preparing of hot water

Cleaning the inlet marine

Checking the bilge pump

Cleaning the inlet marine valves boxes (engine, generator, air-conditioner)

Checking the toilet pumps, macerator pumps

Checking the propeller shaft on leakage

Checking the hydraulic system for steering, clasps, passerelles and cranes

Checking the instruments for engine and generator monitoring

Checking and lubricating the commands for handling with the engines and clasps

View and control of the main electrical switchboardPregled i kontrola glavne elektro razvodne ploče

Control of the electrical switches, the alternator, the rectifier and inverter

Checking the exhaust pipe


UPIT

ZA

PONUDU

ZA

RADNI

NALOG

CHECK

LIST

FOR

THE

ORDER

OF

SERVICE

WORKS


UPIT

ZA

PONUDU

ZA

RADNI

NALOG

CHECK

LIST

FOR

THE

ORDER

OF

SERVICE

WORKS

WORKS AT THE END OF THE SEASONConservation of the engine

Conservation of the generator

Conservation of the outboard motor

Conservation of the jet ski

Conservation of the fore

Conservation of the waren maker

Cleaning, reparation, storage of the rubber boat

Cleaning and storage of the jet ski

Demontage and storage of the sails

Servicing, washing and repairing the sails

External cleaning

Internal cleaning


Washing the awnings

Checking the autmatic bilge pump

Emptying the tank of the service water and the boiler

Turning off the heating of hot water

Setting a desiccant (in the saloon and all cabins)

Lifting the mattresses

Conservation of all stainless steel parts

Closing all sea ventils

Checking the oil level in the passerelles

Turning off all electrical switches

Turning off the electricity supply from the pier

Controling and recharging the batteries during the winter

Starting the engine and generator during the winter

WORKS FOR THE START OF THE SEASONLifting and launching the boat

Cleaning with high pressure pump

Washing the upper part of the hull, washing the sides of the boat

Polishing the upper part of the hull

Washing the deck and superstructure

Polishing the deck and superstructure

Protecting the deck and superstructure with wax

Cleaning and polishing the stainless steel

Washing the teak deck, protective coating (teak treatment)

Washing the tender boat and fenders

Internal cleaning of the cabin

Cleaning and disinfecting the toilets

Cleaning the kitchen and frige


Montage of the sails

Sanding and painting

Renewal of the anti-fouling

Num. layer : Type anti.

Changing the Zn trunk protector, bouthhurter

Cleaning and painting the propellers of the S and Z drive, the intakes, rudders, flaps and valves

Cleaning and controling the bow and stern thrusters

Removing the old anti-fouling

Osmosis protection

Repairs on the fiberglass

Replacement and print of the boat name (label)


UPIT

ZA

PONUDU

ZA

RADNI

NALOG

CHECK

LIST

FOR

THE

ORDER

OF

SERVICE

WORKS

Folding propeller (maintenance, lubrication and visual inspection)

Marine valve (check of corrosion and ease of operation)

Folding propeller (maintenance, lubrication and visual inspection)

Control system (checking the abrasion of the rudder blade bearing, the rope tension, lubrication and checking the anchoring of the autopilot)

Checking the plotters and software update

Checking the electrical devices

Polishing the plexiglass (hatches and windows)

Changing the oil on the side propeller and montage of the battery

Checking the gas tanks and gas installations

Checking the marine valves and rubber tubes

Deconservation of the engine

Deconservation of the generator

Deconservation of the outboard motor

Deconservation of the jet ski

Cleaning the rubber boat and releasing from storage

Cleaning the jet ski and releasing from storage

Shaft seal (checks bearing shafts)


BOAT DATABoat name:

Name and surname of the authorized person:

Name and surname of the boat owner:

Tel./Mob.:

Fax.:

Pier:

Pier No:

Date and time of the expected completion of the work:

The work will be paid by:

E-mail:

Terms of payment: 1. For special works of an estimated value above 1.000,00 EUR a payment in advance of 50% is necessary before starting with the work2. All outstandig debts to the marina Frapa have to be paid before starting with the works3. Obligatory payment immediately upon completionBoat status:

Annual contract

Winter berth

Monthly berth

Transit berth

The owner or the authorized person states that he knows and accepts the contents of the terms of payment and the Regulations of Order in the Nautical Tourism Port marina Frapa.

Date ________________________________ Signature __________________________

PLEASE SEND YOUR APPLICATION BY:Mail: Laguna Trade d.o.o., Uvala Soline 1, 22 203 Rogoznica, Fax: +385 (0) 22 55 99 32E-mail: [email protected]

... or if you fill out the form via computer you can send it automatically by clicking the following button:

We offer attractive prices for accommodation with breakfast in the hotel Marina Frapa during the service works and/or maintenance works on your boat located on land.Book the best accommodation on time and take advantage of the special offer of service and the hotel Marina Frapa

Discount up to 50%

Additional payment per day and per person for half board takes 20,- EUR.

Conditions:The offer is valid for all boats that are located on land in the marina Frapa and that have an open work order for the boat on land or that have open services of combined hibernation on land.

The offer can be used in the time period between October, 1st till April, 1st. (during the boat is located on land (combined berth) or during the ordered works on land)For reservations or more information concerning the attractive offer of service and the hotel marina Frapa, do not hasitate to contact us on the reception of the marina Frapa.

LAGUNA TRADE d.o.o.Marina Frapa

Uvala Soline 1, 22 203 ROGOZNICAFax: +385 (0) 22 55 99 32

Telefon: +385 (0) 22 55 99 00Telefon 2: +385 (0) 22 55 99 31

E-mail: [email protected]

www.facebook.com/MarinaFrapaCroatia

ADDITIONAL BENEFITS

The marina Frapa service performs maintenance works on engines of following manufacturers:» Caterpillar» Volvo pentu» Mercury» Mariner» Yamaha» Perkins» Yanmar» Lombardini» Man» Johnson» Tohatsau» Honda » Vetus» Masse generatori» Fisher Panda generatori» Kohler generatori» Onan generatori

As part of this business the marina Frapa performs also the following works:

» Emergency repairs on boats (engines,navigation equipment, equipment for sailing)

» Regular services of engines and boat equipment

» Contracted boat and equipment maintenance

» Boat repairs (removement of accident consequences and other damage on the boat and equipment,

painting and varnishing of the boats)

» Other works for preparing the boat for sailing

» Maintenance works of the infrastructure of the port of nautical tourism

» Boat towage in the port of Rogoznica

» Filling of gas bottles

GENERAL INFORMATION ABOUT THE MARINA FRAPA SERVICE

In the service area the following equipment is constantly available for you:

» 75 ton travel lift for lifting and launching of boats

» Disposal area/removal of old oil, filters, batteries

» Device for emptying sewage tanks

The works in the marina Frapa service can only be performed by the employees of the marina Frapa service, the boat owners and/or the registered crew, subsidiary companies or registered sub-contractors.Registered sub-contractors are only those individuals or companies that have a working permission in the marina Frapa service and have a confirmation in form of a signed and valid cooperation contract.


Your servis teamJanez Schildenfeld

Documents

Marina Frapa Service