Embed Size (px)
Citation preview
MarCablo
Cable printing
®
Manufacturer of speciality inks and coatingsfor the cable industry and the plastic processing industry
For more than 50 years herkula has been supplying the cable
industry with MarCablo inks for printing and lettering on plastic-
insulated wires and cables. In the MarCablo product line, there
are inks available for all types of materials used as cable insulation.
We supply specially adapted products according to process con-
trol and speed.
For labelling via gravure and pad printing or ringmarking suitable
inks can be supplied as aqueous or solvent-based preparations.
The usual colours in the cable industry are available for all
series. Special shades can be created from a sample or by ar-
rangement.
®
MarCablo-S – Solvent-based cable marking inks
MarCablo-W – water-based cable marking inks
MarCablo
Green...and other colours too
ISO 9001ISO 14001
Ring marking Remarks
17 101, 17 102 Special ink for marking PVC-insulated wires
17 200, 17 201, 17 202 Ink for marking on PVC and PE. The curing of each series is optimised for different line speeds.
17 211 All-purpose marking ink suitable for all common substrates
18 210 Special ink for marking on silicone rubber, with additional crosslinker also suited for enhanced requirementsregarding mechanical and chemical durability in conventional coatings
Direct gravure printing Remarks
17 115 Gravure printing ink especially for the use on PVC
17 214 All-purpose ink that is suited for all common substrates. Curing is specially adapted to high line speeds.
17 217 Like series 17 214, but with a drying speed that is specially adapted to medium line speeds.
17 227 Virtually all-purpose gravure ink that is also suited for difficult substrates such as PTFE and PE blends.
18 215 Special ink for marking on silicone rubber. With additional cross linker also suited for enhanced requirementsregarding mechanical and chemical resistance on the coatings
Remarks
17 220 Drying is specially adapted to low line speeds
17 228 Completely all-purpose offset printing ink suitable for all common substrates
18 220 Special ink for marking on silicone rubber. With additional cross linker also suited for enhanced requirements regarding mechanical and chemical resistance on the coatings
Indirect gravure /pad printing
herkula has more than 20 years of experience with solvent-free, water-based cable inks.Series 07235 is particularly suitable for marking FEP, PTFE and PI.Our experts in application technology will be happy to advise you with respect to a possible change to aqueous systems.
mad
e by
med
ia-p
lann
ing.
be P1
3083
2
®
www.herkula.com
Friedensstraße 21B - 4780 Sankt Vith
Tel.: +32 (0)80 22 87 63
Farbwerke herkula SA/AG
herkula Farben GmbH
Siemensring 44 KD - 47877 Willich
Tel.: +49 (0)2154 95 41 90
