4
NOW AVAILABLE news MAR 2019 RANGE EXPANSION See our website for more part numbers. goss.com.au PETROL DIRECT INJECTION - FUEL RAIL PRESSURE SENSORS PART NO. APPLICATION RPS117 Holden Caprice, Captiva, Commodore VE / VF RPS118 Holden Commodore VE RPS119 Hyundai i45, ix35, Santa Fe, Sonata / Kia Sportage RPS120 Audi / Porsche / Skoda / Volkswagen The Fuel Rail Pressure Sensor (RPS) is used on Common Rail Diesel and Direct Injection Petrol applications to provide the pressure reading in the fuel rail to the vehicles Powertrain Control Module (PCM) and is mounted in the fuel rail close to the injectors. Goss have a extended their range of Fuel Rail Pressure Sensors to include Petrol Direct injection fuel rail pressure sensors, demonstrating our commitment to continually expanding our ranges with the latest in vehicle technology. All Goss ranges are subjected to a stringent validation process, are engineered and sourced from leading OES manufacturers. PART NO. APPLICATION RPS121 Mercedes Benz 2006 onward RPS122 BMW RPS123 Holden Rodeo RA / Nissan Navara D40, Pathfinder R51

MAR 2019 TECHNICAL news NOW BULLETIN AVAILABLE · 2019. 3. 22. · Mercedes Benz W168 GE503 Volkswagen Beetle 9C 2000-2011 902-964 Coolant Water Outlet 917-064 PCV Diaphragm Repair

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND

    MECHATRONIC PRODUCTSim-group.com.au

    TECHNICALBULLETIN NOWAVAILABLE

    FOLD

    newsMAR 2019

    RANGE EXPANSION

    See our website for more part numbers.

    goss.com.au

    TECHNICALBULLETIN

    BMW: 3, 5 & 7 SERIES – NO START FAULT

    BMW E30, E32, E34 and E36 series vehicles all run using an 88 pin Bosch Motronic system. Injectronics have seen these units on numerous occasions presenting with a common no start situation.

    When working with these vehicles, if you happen to experience a no start fault Injectronics suggest you check for ignition, injection and fuel pump operation. Once these operations have been checked without success the supplies and earths as well as the crankshaft trigger inputs should also be tested.

    Given that the E36 3 series BMW electronic control module is mounted inside the plenum chamber behind the firewall it is a common occurrence for the unit to become water damaged, due to the plenum chamber drain pipes becoming blocked resulting in the water overflow entering the ECM.

    Injectronics strongly suggest checking these drain pipes for blockages whenever you are replacing an ECM. The ECM can be accessed in the E36 Series by simply removing the plate on the firewall situated behind the left-hand shocker tower.

    Testing:1. When the ignition key is turned on, power is supplied to pin 56. The ECM will then provide an earth at pin 27 for the DME main relay to pull in.

    When this relay pulls in, power is then supplied to pin 54 via the contacts of the relay.2. When the engine is running, and the key is turned off, injection and fuel pump stop immediately. After the engine has finally stopped rotating the

    ECM will then stop supplying an earth for the main relay on pin 27, therefore the relay will open and stop supplying power to pin 54.

    Power Feed Circuit:• Pin 26 – Constant 12v feed from battery• Pin 54 – Power in from DME main relay• Pin 56 – Ignition key power, only has power when key on

    Injectronics are the experts in bench testing and repairing customers own electronic control modules and have been doing so for many years with great success for the fault mentioned above. We also carry a wide range of exchange electronic control modules in stock, which are supplied in an unlocked state allowing our customers to plug and play.

    For a complete list of OEM part numbers available please visit the Injectronics web page at www.injectronics.com.au

    The actual location of the other ECM’s we’ve mentioned are listed below:• E30 3 series (late) – below steering column• E36 3 series – left hand fire wall / plenum

    • E34 5 series – right hand rear corner engine bay• E32 7 series – right hand rear corner engine bay

    *Repair service

    PETROL DIRECT INJECTION - FUEL RAIL PRESSURE SENSORS

    PART NO. APPLICATION

    RPS117 Holden Caprice, Captiva, Commodore VE / VF

    RPS118 Holden Commodore VE

    RPS119 Hyundai i45, ix35, Santa Fe, Sonata / Kia Sportage

    RPS120 Audi / Porsche / Skoda / Volkswagen

    The Fuel Rail Pressure Sensor (RPS) is used on Common Rail Diesel and Direct Injection Petrol applications to provide the pressure reading in the fuel rail to the vehicles Powertrain Control Module (PCM) and is mounted in the fuel rail close to the injectors.

    Goss have a extended their range of Fuel Rail Pressure Sensors to include Petrol Direct injection fuel rail pressure sensors, demonstrating our commitment to continually expanding our ranges with the latest in vehicle technology. All Goss ranges are subjected to a stringent validation process, are engineered and sourced from leading OES manufacturers.

    PART NO. APPLICATION

    RPS121 Mercedes Benz 2006 onward

    RPS122 BMW

    RPS123 Holden Rodeo RA / Nissan Navara D40, Pathfinder R51

  • news

    FOLD

    THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND MECHATRONIC PRODUCTS

    THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND MECHATRONIC PRODUCTS

    JUST A SAMPLE OF OUR CONTINUALLY INCREASING

    RANGE OF GENUINE OEM AND AFTERMARKET AUTOMOTIVE ELECTRONIC COMPONENTS.

    JUST A SAMPLE OF OUR CONTINUALLY INCREASING RANGE OF GENUINE OEM AND AFTERMARKET AUTOMOTIVE ELECTRONIC COMPONENTS.

    INSIDE RIGHTINSIDE LEFT

    Holden Astra TS, AH

    VS277Boost Pressure Solenoid Valve

    Mazda 3, 6, MPV, CX7

    VS278Boost Pressure Solenoid Valve

    VSC111GENSuction Control Valve

    Mitsubishi ASX, Outlander, Pajero, Triton

    Mercedes Benz W169, W245

    GE504Fuel Pump Module

    Ford Escape ZG, Kuga TF

    GE553Fuel Pump Module

    Ford Ranger PX / Mada BT50 UP, UR

    GE555Fuel Pump Module

    KF226Complete Remote

    Holden Captiva CG Chrysler / Dodge / Fiat / Jeep / Ram

    KF348Replacement Shell

    KF412Complete Key

    Toyota Kluger Toyota Camry ASV50

    KF416Complete Remote

    Nissan Maxima, Pathfinder, Patrol

    KF431Replacement Shell

    Audi A3 / VW Golf, Passat, Touareg

    VS205Solenoid Valve

    Saab 9-5

    GE501Fuel Pump Module

    Mercedes Benz W168

    GE503Fuel Pump Module

    Volkswagen Beetle 9C 2000-2011

    902-964Coolant Water Outlet

    917-064PCV Diaphragm Repair Kit

    VW Amarok 2H, Crafter 2E, 2F

    EV151EGR Valve

    Nissan Cube Z11, March K12

    GE500 Fuel Pump Module

    KF433Replacement Shell

    Mitsubishi Lancer CJ, CF, Outlander

    Lexus SXE10R / Toyota SXE10R

    SC586Crank Sensor

    Audi / Bentley / Skoda / Volkswagen

    SC587Cam Sensor

    SC585Cam Sensor

    Ford Focus LR

    13911 Brake Master Cylinder Bleeder Kit

    Nissan Pulsar C12

    VT145VVT Solenoid

  • news

    FOLD

    THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND MECHATRONIC PRODUCTS

    THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND MECHATRONIC PRODUCTS

    JUST A SAMPLE OF OUR CONTINUALLY INCREASING

    RANGE OF GENUINE OEM AND AFTERMARKET AUTOMOTIVE ELECTRONIC COMPONENTS.

    JUST A SAMPLE OF OUR CONTINUALLY INCREASING RANGE OF GENUINE OEM AND AFTERMARKET AUTOMOTIVE ELECTRONIC COMPONENTS.

    INSIDE RIGHTINSIDE LEFT

    Holden Astra TS, AH

    VS277Boost Pressure Solenoid Valve

    Mazda 3, 6, MPV, CX7

    VS278Boost Pressure Solenoid Valve

    VSC111GENSuction Control Valve

    Mitsubishi ASX, Outlander, Pajero, Triton

    Mercedes Benz W169, W245

    GE504Fuel Pump Module

    Ford Escape ZG, Kuga TF

    GE553Fuel Pump Module

    Ford Ranger PX / Mada BT50 UP, UR

    GE555Fuel Pump Module

    KF226Complete Remote

    Holden Captiva CG Chrysler / Dodge / Fiat / Jeep / Ram

    KF348Replacement Shell

    KF412Complete Key

    Toyota Kluger Toyota Camry ASV50

    KF416Complete Remote

    Nissan Maxima, Pathfinder, Patrol

    KF431Replacement Shell

    Audi A3 / VW Golf, Passat, Touareg

    VS205Solenoid Valve

    Saab 9-5

    GE501Fuel Pump Module

    Mercedes Benz W168

    GE503Fuel Pump Module

    Volkswagen Beetle 9C 2000-2011

    902-964Coolant Water Outlet

    917-064PCV Diaphragm Repair Kit

    VW Amarok 2H, Crafter 2E, 2F

    EV151EGR Valve

    Nissan Cube Z11, March K12

    GE500 Fuel Pump Module

    KF433Replacement Shell

    Mitsubishi Lancer CJ, CF, Outlander

    Lexus SXE10R / Toyota SXE10R

    SC586Crank Sensor

    Audi / Bentley / Skoda / Volkswagen

    SC587Cam Sensor

    SC585Cam Sensor

    Ford Focus LR

    13911 Brake Master Cylinder Bleeder Kit

    Nissan Pulsar C12

    VT145VVT Solenoid

  • THE TRULY INDEPENDENT LEADER IN ENGINE MANAGEMENT AND

    MECHATRONIC PRODUCTSim-group.com.au

    TECHNICALBULLETIN NOWAVAILABLE

    FOLD

    newsMAR 2019

    RANGE EXPANSION

    See our website for more part numbers.

    goss.com.au

    TECHNICALBULLETIN

    BMW: 3, 5 & 7 SERIES – NO START FAULT

    BMW E30, E32, E34 and E36 series vehicles all run using an 88 pin Bosch Motronic system. Injectronics have seen these units on numerous occasions presenting with a common no start situation.

    When working with these vehicles, if you happen to experience a no start fault Injectronics suggest you check for ignition, injection and fuel pump operation. Once these operations have been checked without success the supplies and earths as well as the crankshaft trigger inputs should also be tested.

    Given that the E36 3 series BMW electronic control module is mounted inside the plenum chamber behind the firewall it is a common occurrence for the unit to become water damaged, due to the plenum chamber drain pipes becoming blocked resulting in the water overflow entering the ECM.

    Injectronics strongly suggest checking these drain pipes for blockages whenever you are replacing an ECM. The ECM can be accessed in the E36 Series by simply removing the plate on the firewall situated behind the left-hand shocker tower.

    Testing:1. When the ignition key is turned on, power is supplied to pin 56. The ECM will then provide an earth at pin 27 for the DME main relay to pull in.

    When this relay pulls in, power is then supplied to pin 54 via the contacts of the relay.2. When the engine is running, and the key is turned off, injection and fuel pump stop immediately. After the engine has finally stopped rotating the

    ECM will then stop supplying an earth for the main relay on pin 27, therefore the relay will open and stop supplying power to pin 54.

    Power Feed Circuit:• Pin 26 – Constant 12v feed from battery• Pin 54 – Power in from DME main relay• Pin 56 – Ignition key power, only has power when key on

    Injectronics are the experts in bench testing and repairing customers own electronic control modules and have been doing so for many years with great success for the fault mentioned above. We also carry a wide range of exchange electronic control modules in stock, which are supplied in an unlocked state allowing our customers to plug and play.

    For a complete list of OEM part numbers available please visit the Injectronics web page at www.injectronics.com.au

    The actual location of the other ECM’s we’ve mentioned are listed below:• E30 3 series (late) – below steering column• E36 3 series – left hand fire wall / plenum

    • E34 5 series – right hand rear corner engine bay• E32 7 series – right hand rear corner engine bay

    *Repair service

    PETROL DIRECT INJECTION - FUEL RAIL PRESSURE SENSORS

    PART NO. APPLICATION

    RPS117 Holden Caprice, Captiva, Commodore VE / VF

    RPS118 Holden Commodore VE

    RPS119 Hyundai i45, ix35, Santa Fe, Sonata / Kia Sportage

    RPS120 Audi / Porsche / Skoda / Volkswagen

    The Fuel Rail Pressure Sensor (RPS) is used on Common Rail Diesel and Direct Injection Petrol applications to provide the pressure reading in the fuel rail to the vehicles Powertrain Control Module (PCM) and is mounted in the fuel rail close to the injectors.

    Goss have a extended their range of Fuel Rail Pressure Sensors to include Petrol Direct injection fuel rail pressure sensors, demonstrating our commitment to continually expanding our ranges with the latest in vehicle technology. All Goss ranges are subjected to a stringent validation process, are engineered and sourced from leading OES manufacturers.

    PART NO. APPLICATION

    RPS121 Mercedes Benz 2006 onward

    RPS122 BMW

    RPS123 Holden Rodeo RA / Nissan Navara D40, Pathfinder R51