Upload
manuel-ortega
View
113
Download
3
Embed Size (px)
Citation preview
MANUEL ORTEGA
CUBAN AMERICAN EXPERIENCED MOTOR WINDER
CELL:305 989 7110 E MAIL:[email protected]
AC or DC motor and generators of any size.Stator and DC armatures;from datas to last test;including lamination work;core losses (Actually I work with a PHENIX) coils,insulation,winding,conection,soldering,analyzer test.I have worked with different analyzers;BAKER,and SKF (see in my pics).Can work also mechanic,such as tear motor in parts,inspect housing and shafts,remove ,and replace bearings and put it togheter;connect leads and test it.Also Balancing(I use a DYNA BAL).Can weld and make some electrical works too.
Motor winder, since 1974 to 1980 in Havana, Cuba for Sugar industries. Used to Rewind ,work mechanic,and make lamination repair. And for “AGUAS DE LA HABANA”(acueduct,) where used to rewind high and low voltage stators;and worked from 1992 to July of 2004;coming to Miami,fl in 08/04.
MOTOR WINDER POSITIONS IN USA:
-ELECTRIC MOTOR WORK:LARGO FL.Small shop where used to rewind stator of pumps(Myer,Hydromatic,Godwin,flygt…)Compressors(Copeland,Carrier…
-WESTIDE ELECTRIC,JACKSONVILLE,FL,rewinding large motors,random and formed coils,. From 10/10 to 07/12.
-DON ABNEY INC.PATTERSON,LA where basically used to repair and rewind AC generators,and motors,From 07/12 to 05/13 for
-PRESISION NEUMATICS,in Freeport,tx since 15/07/13.Actual job.
References:
Don Delaney,owner of ELECTRIC MOTOR WORK.1701 Belcher rd.Largo fl 33771
727 538 4778
JEREMY CHESTEEN, former Shop manager of ABNEY DON INC. ( 985) 714 3547.
ANDREW BALLART;owner,at PPI,Freport,tx.(979) 864 9370
Stator ,before and after tie
generator KATO
rotor of an AC CATERPILLAR generator GE 3600 rpm 2300v September 5 2014
DC motor SIEMEN,20 HP,ARMATURE AND STATOR armature GE 150 hp
ONAN generator 300 kva PMM INSEROLL RAND 400 HP re lead
stator HITACHI 200 hp concentric winding balancing a rotor
Above one, just finished core losses(phenix) SKF analyzer