Upload
phamdan
View
222
Download
0
Embed Size (px)
Citation preview
PRODUCT DATA SHEET
MODEL: TMB 4000
MANUAL PARTS WASHER LINE - TMB SERIES
Parts Washer and Cleaning Solutions Since 1996
Renegade Model TMB 4000 Heavy Duty Parts Washer
PRODUCT OVERVIEW
The Renegade TMB SERIES Manual Parts Washers for general repair cleaning are the practical alternative to washing parts with solvents. The Renegade TMB 4000 Manual Parts Washer for heavy duty applications is the low maintenance, cost effective solution for a variety of industrial and grease-busting operations.
The Renegade TMB 4000 Manual Parts Washer includes adjustable fountain nozzle, 1/2" polyethylene construction, heavy-duty casters, 20 gallon holding tank, low water alarm and shut down system, and adjustable thermostat. High heat and high pressure production applications.
KEY FEATURES• 70Z Heavy Duty High Volume Centrifugal Wash Pump - 11.4 GPM• 1.1KW Heater for Max Solution Temperature of 150 °F• Sump Capacity - 20 Gallons• Heavy Duty Polyethylene Construction• Automatic Low Water Level Shut Down• Heavy Duty Casters for Portability
TMB 4000 ACCESSORY PACKAGE• Flow Thru Scrub Brush• Flow Thru Detail Brush• Parts Magnet• Power Gun with Splash Guard• Brush Kit• Sink Insert Sediment Tray w/Foam• Oil Absorbent Towel Holder
Fountain Control Panel
Interior Pump Motor
Service Line, Inc. | 2320 Zinga Drive Reedsburg, WI 53959 | Phone: 608-524-0204 | Toll Free: 800-774-7900 | FAX: 608-524-1446 | www.renegadepartswashers.com
WASH ZONE SPECS 500 LB. LOAD CAPACITY
CALL: 800-774-7900EMAIL: [email protected]
TMB 4000 Outside Dimensions Height: 40-1/2"; Width: 40-1/2"; Depth: 31"; Machine Weight: 189 lbs.
TMB 4000 Manual Parts Washer Rev. 10-2016 Subject to change without notice.
34" WIDTH
26" DEPTH
18" HEIGHT
Sink Wash Zone
Sink Bottom
INDUSTRIAL APPLICATIONS
Automobile Repair Facilities
Bicycle Repair
Machine Shops
Small Engine Repair
MANUAL
R E P A I R
GENERAL
Renegade Parts Washers are designed to work with Renegade detergents for maximum cleaning without residue buildup.
TMB 4000 Manual Parts Washer Rev. 10-2016 Subject to change without notice.
CALL: 800-774-7900EMAIL: [email protected]
PRODUCT DATA SHEET
MODEL: TMB 4000
• Splash Shield• 7 Day Timer• Work Light• Foot Switch • Triple Cartridge Filtration System
ABOUT RENEGADE PARTS WASHERS RENEGADE PARTS WASHER DETERGENT
Renegade’s history of providing parts washers solutions also includes a wide variety of specially formulated soaps and detergents for use in parts washer systems. Renegade’s experience in the industry led to the development of special non-solvent based surfactants that are both environ-mentally safe and health conscious for your employees. Use Renegade low-foaming detergents to remove grease, soil, paint, corrosion, oil, and other contamination from parts’ surfaces. Choose from manual or automatic detergents, degreasers, additives and hand cleaners. Learn more and order now, call 800-774-7900 or go to Renegade at www.partwasher.net.
Manufactured by Service Line, Inc., Renegade Parts Washers and Renegade I-Series Industrial Parts Washers are designed to efficiently clean parts and components in a wide variety of industrial applications in both general cleaning and industrial high volume operations.
Since 1996, our industry experience has led to innovations in automatic and manual top load, front load and turntable parts washers, along with exclusive developments in parts washer detergents. Renegade Parts Washers offers fast lead times, quality service, support and custom design parts washer configurations with our Clean Spec Consulting Services. Renegade customers include small manufacturers and prominent Fortune 500 companies.
As a full service parts washer solution provider, Renegade supports the maintenance and performance of your parts washer with a wide range of parts and supplies such as filter cartridges, baskets, brushes, and hoses. Learn more and order now, call 800-774-7900 or go to Renegade at www.partwasher.net.
RENEGADE PARTS WASHER HARDWARE AND SUPPLIES
Parts Washer and Cleaning Solutions Since 1996
Service Line, Inc. | 2320 Zinga Drive Reedsburg, WI 53959 | Phone: 608-524-0204 | Toll Free: 800-774-7900 | FAX: 608-524-1446 | www.renegadepartswashers.com
RENEGADE MANUAL PARTS WASHERS - TMB SERIES CONFIGURATIONS FOR GENERAL REPAIR APPLICATIONS
MODELSINK
DIMENSIONSLOAD
CAPACITYSUMP
CAPACITYPUMP INFO
HEATER SIZE
MAX SOLUTION TEMPERATURE
CONSTRUCTION DIMENSIONS
TMB 200018" H x 34" W
x 26" D500 lbs. 20 gal.
Submersible Pump
2.2 GPM1.1 KW 130 °F
1/2" polyethylene construction
40.5" H x 40.5" W x 31" D
TMB 300018" H x 34" W
x 26" D500 lbs. 20 gal.
30Z High Volume Centrifugal
4.5 GPM1.1 KW 150 °F
1/2" polyethylene construction
40.5" H x 40.5" W x 31" D
TMB 400018" H x 34" W
x 26" D500 lbs. 20 gal.
70Z High Volume Centrifugal 11.4 GPM
1.1 KW 150 °F1/2" polyethylene
construction40.5" H x 40.5" W x 31" D
TMB 500012" H x 40.5" W x 29.5" D
500 lbs. 60 gal.70Z High Volume
Centrifugal 11.4 GPM
1.65 KW 150 °F 11 Gauge Steel 54-1/2" H x 43" W x 31" D
OPTIONS FOR THE RENEGADE TMB 4000