Note: Crown position "A" "B" &"C" Note: Pusher "A" ( Top Right), Pusher 'B" ( Bottom Right) Note: 3 o'clock eye - 24 hour hand / diskNote: 6 o'clock eye - second handNote : 9 o'clock eye - stopwatch minute hand / disk

This Chronograph watch has three functions : TIME, CALENDAR, STOPWATCH

TIME To set the time: 1. Pull crown to position "C" 2. Turn crown clockwise / counter clockwise to correct time

A B C

Crown PosITIon

PUsHEr “B”

PUsHEr “A”

OS20 DATE

sToPwATCH MInUTE HAnD

sEConD HAnD

24 HoUr HAnD

sToPwATCH sEConD HAnD

A B C

Crown PosITIon

PUsHEr “B”

PUsHEr “A”

OS2B DATE

sToPwATCH MInUTE DIsk

sEConD HAnD

24 HoUr DIsk

sToPwATCH sEConD HAnD

3. Push crown to position "A"Remarks: When crown is pushed back to position "A," small second

hand begins to run.

CALEnDAr To set the calendar 1. Pull crown to position "B" 2. Turn crown counter-clockwise to set calendar 3. Push crown to position "A"

sToPwATCH The stopwatch is capable to measure and display time in 1/1 second united up to maximum of 59 minutes 59 seconds.

1. Press pusher "A" to start timing 2. Press pusher "A" again to stop timing 3. Press pusher "B" to reset

CorrECTInG sToPwATCH HAnD If after resetting the stopwatch second hand it is found that they are not at the '12' or '0' position, correct it as follows:

1. Pull crown to "C" position 2. Press pusher "A" continuously, the stopwatch second hand will be

advanced rapidly until it gets closely to the "12" position. Then, press pusher "A" repeatedly, the stopwatch second hand will be moved by interval until it returns to "12" position.

3. Push crown to position 'A"