Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Manual Hihome Smart WiFi Bulb
items: WAL-CCT1/WAL-RGBW1
Versie 1.01
Safety information
This product is designed for indoor use. Keep away from moist and damp environment
Read the manual carefully Hihome (At Home Technologies BV) is not liable and responsible when used incorrectly. Do not connect to devices without a fuse. Do not connect devices with a power usage than indicated on the plug.
Visit https://www.hihome.eu/manuals for more details manuals and update manuals. For questions you can send an email to [email protected]
Step 1
Download the Hihome App for iOS of Android
Hihome Smart
Visit https://www.hihome.eu/manuals for more details manuals and update manuals. For questions you can send an email to [email protected]
Step 2
Register and log in
Step 3
Add device and choose Lighting Devices
Step 4
Mount Smart WiFi lamp in de socket (E27)
• When powered on, the bulb starts to blink rapidly
• When the bulb is not blinking, start the Connetion mode
• Activate the pairing mode by switching off and on the bulb for 3 times
• After 3 times switching off and on, the bulb starts to blink rapidly
• The bulb is ready to connect…
Step 5
Connect to your home WiFi (Smart WiFi)
Step 6
Connect the Smart Plug to the Hihome App
Step 7
Operate and setup the bulb using the Hihome App
Attention!
The Hihome Smart WiFi bulbs are dimmable via de Hihome App or Google Assistant or Alexa. Do not use a conventional dimmer because it lowers the power and possibly deactivates the WiFi module. The bulb will then not respond until the power is set to the maximum again.
Connecting with Google Home or Alexa
Find a specific manual for connecting the Hihome Smart Plug with Google Home.
Go to: https://hihome.eu/manuals/
Find a specific manual for connecting the Hihome Smart Plug with Amazon Alexa.
Go to: https://hihome.eu/manuals/