Embed Size (px)
Citation preview
forGarden Shed
2,36x1,74x2,06m
Manual
11-06-2020
Metal Garden ShedOWNER'S MANUALInstructions for Assembly
Requires two people
Quick & Easy AssemblyRidge Reinforced WallsAvailable in Various Sizes
BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
It requires two people a full
day to complete installation
PLAN AHEADSite Selection
Avoid overhanging trees as much as possible as leaves will make regular cleaningnecessary and broken branches are a potential hazard.
Small trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checkingwith a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisturegetting into the shed.The shed is not designed to be built onto lawn directly.Also theground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to preventwater ingress.Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.The bricks or blocks should be cemented onto firm and level concrete footings and theshed frame drilled and screwed to the base.
IMPORTANT NOTES:
Find someone to help you:it is much easier with someone to hold parts,pass toolsect.Also some steps require two people to lift structures together.This is not veryheavy work so would suit most able-bodied people.
Allow plenty of time:rushing often causes errors and the re-doing of incorrectassemblies.If you have never built a shed before,it can take most of a day to carefullycomplete the construction.
Have the right tools to hand.
Safety clothing as recommended in the 'Tools' section.
Ideally lat out the parts and check that all are present before commencingconstruction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
Tighten all nuts carefully,being sure not to miss any.Check the frame is square andusing a spirit level to check that it is upright.
PARTNO. Qty.
1L
PARTNO. Qty.
2
2R
3L
848mm
1R
2L
923mm
4L
4R
5
6
7
8
9
10L
10R
11
13
14
15-1
15-2
16
3R
12
16-1
17L
17R
18
19
20
21L
21R
22L
22R
24-1
24-2
B1
B2
B3
B4
848mm
1169mm
1169mm
702mm
702mm
1720mm
1720mm
1032mm
1090mm
1105mm
1105mm
794mm
1118mm
1118mm
794mm
356mm
852mm
852mm
1090mm
1090mm
923mm
1207mm
1207mm
548mm
1090mm
662mm
797mm
797mm
662mm
662mm
139mm
139mm
286mm
286mm
2
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
1
1
1
1
2
2
6
1
1
2
2
2
2
1
1
1
2
1
1
2
2
2
23L
23R 1
1118mm
1118mm
1720mm
PARTNO. Qty.
G24
2
GF
GD
GB
GC
4
4
F1
F2
F3
S3
330
8
70
288
S2
210
PARTNO. Qty.
1710X552mm
D1
1
D2
1
4
P1
P3
P4
P5
P6
P7
1207mm
2
2
4
2
2
2
P2 4
GE2
1207mm
1207mm
1710X552mm
1720mm
1720mm
1720mm
13
14
16-1
16
13
14
21R
21L
21L
21R
12
B1
B3
B4
B2
12
B1
B3
B4
B2
11
9
1R
1R
1L
1L
2L
2R
3L
3R
5
10L
10R
22L
22R
23L
23R
7
8
P1
P1
P4
P4
P4
P4
P2
P2
P3
P3
P2
P2
D1
D2
18
6
4R
4L
22R
22L
11
9
P6
P5
24-1
15-1
GE
17L
17R
24-2
15-2
19
GC
GC
P7
P7
GE
P5
P6
17L
20
GC
GC
17R
2L
2R
1R
1L
F1
F1
-7-
1L
PARTNO. Qty.
2
F1
1L
1R
1R 2
2L
PARTNO. Qty.
1
F1
2R
2L
2R 1
1L
1R
x2
PARTNO. Qty.
1
1
3L
3R
3L
3R
F1
F1
PARTNO. Qty.
1
5
5
F1F1
1、When diagonal measurements areequal,the frame is square.
2、The Floor Frame must beBOTH square AND level or theholes will not line up properly.
-8-
PARTNO. Qty.
P1 1
F1
S3
PARTNO. Qty.
1
PARTNO. Qty.
22R1
S3
F1
5
-9-
P1
P4
Ⅰ
ⅡF1
Ⅱ
Ⅰ
S3
P4
F2
S3
22R
PARTNO. Qty.
P2 1
F1
S3
PARTNO. Qty.
1
-10-
P4
P2
P4
Ⅰ
Ⅱ
F1
Ⅱ
S3
Ⅰ
22L
F1
PARTNO. Qty.
22L1
S3
F1
F1
S3
PARTNO. Qty.
P3 1
F1
S3
PARTNO. Qty.
1P4
F1
S3
F1
Ⅱ
Ⅰ
S3
S3
F1
22R
23R
-11-
23R
PARTNO. Qty.
23R
1
P3
Ⅰ
F1
P4
F1
Ⅰ
Ⅱ
F1
-12-
PARTNO. Qty.
F1
S3
S3
F1
P1
23L
F1
23L
1
F1
22R
22R
23L
PARTNO. Qty.
1P1
PARTNO. Qty.
22R1
F1
S3
PARTNO. Qty.
1P4
F1
9
11
11
9
PARTNO. Qty.
29
211
-13-
P4
F2
F1
F1
F1
Ⅱ
Ⅰ
Ⅰ
Ⅱ
PARTNO. Qty.
22L1
22L
F1
S3
F1
S3
S3
F1
F1
S3
-14-
10L
10R
10L
10R
PARTNO. Qty.
110L
110R
x2
PARTNO. Qty.
GF4
PARTNO. Qty.PARTNO. Qty.
2
2
21L
21R
2
2
B3
B4
2
2
B1
B2
212
GFGF
x2
21L
21R
B4
B3
B1
B2
12
12
B3
21L
F2
S3
F2
S3
F1
S3
PARTNO. Qty.
P2
P3 1
3
7
8
PARTNO. Qty.
2
2
13
14
13
14
F2
PARTNO. Qty.
17
18
G24
8
7
G2
-15-
P2
P2
P2
P3
7&8
G2
x2
F1
S3
-16-
PARTNO. Qty.
116
1
16-1
F2
16
16-1
F2
12
F2
12
14
13
13
14
Ⅰ
Ⅱ
Ⅰ
Ⅱ
Ⅰ
F2
F2
Ⅱ
F1
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
16
1616
16-1
-17-
4L
4R
6
PARTNO. Qty.
1
4L
1
4R
1
6
4R
6
F1
S3
P6
P5
P7
P7
PARTNO.Qty.
1
P5
P6
1
PARTNO. Qty.
2
P7
F1
S3
F1
S3
F2
S3
-18-
PARTNO. Qty.
1
P5
P6
1
P5
P6
20
19
PARTNO. Qty.
191
201
F1
S3
F1
GE
17R
20
17L
PARTNO. Qty.
17L2
17R2
GE2
17L
17R
17L
17R
GE
GE
F1
S3
-19-
PARTNO. Qty.
618
D1&D2
18
18
18
S3
F1F2
x2
S3
F2
PARTNO. Qty.
D11
D21
2GB
x2
GB
F2
D1&D2
15-1
24-1
24-2
17L
ⅠⅠ
Ⅱ
Ⅱ
PARTNO. Qty.
2
15-1&15-2
28
GC
ⅠⅡ
F1 F1
4
GC
15-2
2
24-1&24-2
Ⅰ
Ⅰ
F3
7&8 G2
PARTNO. Qty.
GD4
D1 D2
GE
S3F2
-20-
Contact information
Head office:Dancover A/SNordre Strandvej 119 G3150 HellebækDenmark
For more informationplease visit:www.dancovershop.com
National contact
Denmark: 70 26 76 [email protected]
UK: 020 8099 [email protected]
Spain: 911 436 [email protected]
Italy: 02 479 21 [email protected]
Germany: 041 0266 [email protected]
Switzerland: 0840 [email protected]
France: 0975 181 [email protected]
Austria: 0662 [email protected]
Sweden: 040 233 [email protected]
Finland: 0 931 581 [email protected]
Nederland: 0 858 880 [email protected]
Poland: 22 300 [email protected]
Ireland: 0 151 33 [email protected]
Luxembourg: +49 041 0266 [email protected]
Portugal: 308 800 [email protected]
Belgium: 0 28 08 08 [email protected]
Norway: 231 00 [email protected]
![F T KuP · q - @ X Sr]s o | Wt o 4 < ) H ).G'3./ * y 675 3,D[M$21R"%6M/ c$2/ " !#DM$2/i0$2143./ 5 !#67,.$', ( )|C /a](https://img.pdfslide.us/doc/110x75/5ec408edda065c09a239b3aa/f-t-q-x-srs-o-wt-o-4-h-g3-y-675-3dm21r6m-c2-.jpg)
