SERVICE MANUAL

DVD DECK RECEIVER

E ModelAustralian Model

SPECIFICATIONS

HCD-ZX10DVer. 1.1 2005.06

9-879-053-022005F05-1© 2005.06

Sony CorporationAudio GroupPublished by Sony Engineering Corporation

HCD-ZX10D is the amplifier, disc player, tapedeck and tuner section in LBT-ZX10D.

Model Name Using Similar Mechanism NEWDVD

DVD Mechanism Type CDM79B-DVBU64Section

Optical Traverse Unit Name DBU-3

Tape deck Model Name Using Similar Mechanism HCD-GN100D

Section Tape Transport Mechanism Type CWM43RR35

This system incorporates Dolby* Digital, Dolby ProLogic (II) adaptive matrix surround decoder, and theDTS** Digital Surround System.

* Manufactured under license from DolbyLaboratories.“Dolby”, “Pro Logic”, and the double-D symbol aretrademarks of Dolby Laboratories.

** Manufactured under license from Digital Theater Systems, Inc. “DTS” and “DTS Digital Surround” are registeredtrademarks of Digital Theater Systems. Inc.

Amplifier sectionThe following measured at AC 120, 220, 240 V, 50/60 HzDIN power output (rated)Front speakers: 140 + 140 watts

(6 ohms at 1 kHz, DIN)Center speaker: 55 watts

(24 ohms at 1 kHz, DIN)Surround speakers: 140 + 140 watts

(6 ohms at 1 kHz, DIN)Continuous RMS power ouput (reference)Front speakers: 180 + 180 watts

(6 ohms at 1 kHz, 10% THD)

Center speaker: 70 watts (24 ohms at 1 kHz, 10% THD)

Surround speakers: 180 + 180 watts (6 ohms at 1 kHz, 10% THD)

InputsPHONO IN (phono jacks):

sensitivity 3 mV, impedance 47 kOhms

MIC (phone jack): sensitivity 1 mV, impedance 10 kOhms

GAME INPUT AUDIO L/R (phono jacks):sensitivity 250 mV, impedance 47 kOhms

GAME INPUT VIDEO (phono jack):1 Vp-p, 75 ohms

VIDEO/SAT IN L/R (phono jacks):sensitivity 250 mV/ 450 mV, impedance 47 kOhms

OutputsPHONES (stereo phone jack):

accepts headphones of 8 ohms or more

VIDEO/SAT OUT L/R (phono jacks):voltage 250 mV,impedance 1 kOhm

VIDEO OUT (phono jack):max. output level 1 Vp-p, load impedance 75 ohms

COMPONENT VIDEO OUT: Y: 1 Vp-p, 75 ohmsPB/CB: 0.7 Vp-p, 75 ohmsPR/CR: 0.7 Vp-p, 75 ohms

S VIDEO OUT (4-pin/mini-DIN jack): Y: 1 Vp-p, unbalanced, Sync negativeC: 0.286 Vp-p load impedance 75 ohms

SUBWOOFER OUT (phono jack): voltage 250 mV, impedance 1 kOhm

SPEAKERS:FRONT L/R, SURROUND L/R:

Use only the suppliedspeaker SS-ZX10D

CENTER: Use only the suppliedspeaker SS-CT381

Disc player sectionSystem Compact disc and digital

audio and video systemLaser Semiconductor laser

(DVD: λ=650 nm,CD: λ=780 nm)Emission duration: continuous

Frequency response DVD (PCM 48 kHz):2 Hz – 22 kHz (±1 dB)CD: 2 Hz – 20 kHz (±0.5 dB)

Video color system formatNTSC, PAL

– Continued on next page –

2

HCD-ZX10D

Notes on chip component replacement• Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may be

damaged by heat.

Flexible Circuit Board Repairing• Keep the temperature of the soldering iron around 270 ˚C

during repairing.• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).• Be careful not to apply force on the conductor when soldering

or unsoldering.

CAUTIONUse of controls or adjustments or performance of proceduresother than those specified herein may result in hazardous radiationexposure.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINEWITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND INTHE PARTS LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTS WHOSEPART NUMBERS APPEAR AS SHOWN IN THIS MANUAL ORIN SUPPLEMENTS PUBLISHED BY SONY.

GeneralPower requirementsAustralian model: 230 – 240 V AC,

50/60 Hz

Other models: 1Mexican model: 127 V AC, 60 Hz

20 V, 220 V or 230 – 240 V AC, 50/60 HzAdjustable with voltage selector

Power consumption 370 wattsDimensions (w/h/d) (Unit)

Approx. 362 × 437 ×465 mm

Mass (Unit) Approx. 20.0 kg

Design and specifications are subject to change without notice.

Tape deck sectionRecording system 4-track 2-channel, stereoFrequency response 50 – 13,000 Hz (±3 dB),

using Sony TYPE I tapes

Tuner sectionFM stereo, FM/AM superheterodyne tuner

FM tuner sectionTuning range 87.5 – 108.0 MHz

(50 kHz step)Antenna FM lead antennaAntenna terminals 75 ohms unbalancedIntermediate frequency 10.7 MHz

AM tuner sectionTuning range 531 – 1, 602 kHz

(with the tuning interval set at 9 kHz)530 – 1, 710 kHz (with the tuning interval set at 10 kHz)

Antenna AM loop antennaAntenna terminals External antenna terminalIntermediate frequency 450 kHz

This appliance isclassified as a CLASS 1LASER product. Thislabel is located on therear exterior.

The following caution label is located inside theapparatus.

Ver. 1.1

3

HCD-ZX10D

Region code of DVDs you can playback on this system

Your system has a region code printed on the back of the unit and will only playback DVDs labeled with identical region code.DVDs labeled will also be played back on this system.If you try to playback any other DVD, the message “Playback prohibited by area limitations.” will appear on the TV screen. Depending on the DVD, no region code indication may be labeled even though playing the DVD is prohibited by area restrictions.

Discs that this system cannot playback

• CD-ROMs other than those with extension “.MP3”, “.JPG” or “.JPEG”.

• CD-Rs/CD-RWs other than those recorded in the following formats:

– Audio CD format.

– VIDEO CD format.

– MP3 (MPEG 1 Audio Layer 3)/JPEG format that conforms to ISO 96601) Level 1/Level 2 or Joliet.

• Data part of CD-Extras2).• Data part of Mixed CDs3).• Super Audio CDs.• DVD-RWs in VR (Video Recording) mode.• DVD-ROMs.• DVD-RAMs.

• DVD Audio discs.• DVDs with a different region code.• Progressive JPEG format files.• Disc with non-standard shapes (e.g., heart,

square, star).• Discs with adhesive, cellophane tape or

sticker still left on them.1) ISO 9660 Format

The most common international standard for the logical format of files and folders on a CD-ROM. There are several specification levels. In Level 1, file names must be in the 8.3 format (no more than eight characters in the name, no more than three characters in the extension and in capital letters). Folder names can be no longer than eight characters. There can be no more than eight nested folder levels. Level 2 specifications allow file names and folder names up to 31 characters long. Each folder can have up to eight nested folder levels.

2) CD-ExtraThis format records audio (audio CD data) on the tracks in session 1 and data on the tracks in session 2.

3) Mixed CDThis format records data on the first track and audio (audio CD data) on the second and subsequent tracks of a session.

Notes about CD-R/CD-RW/DVD-R/DVD-RW (Video mode)/DVD+R/DVD+RW

• In some cases, CD-Rs, CD-RWs, DVD-Rs, DVD-RWs (Video mode) (DVD-RWs created in video mode have the same format as DVD VIDEO), DVD+Rs or DVD+RWs cannot be played back on this system depending upon the recording quality or physical condition of the disc, or the characteristics of the recording device. Furthermore, the disc will not playback if it has not been correctly finalized. For more information, see the operation instructions for the recording device.

• A disc recorded in packet write format cannot be played back.

ALL

x

Region code

You can playback the following discs on this system. Other discs cannot be played back.

List of playable discs

The “DVD VIDEO” logo is a trademark.

Playable discs

Format of discs Disc logo

DVD VIDEOs

VIDEO CDs

Audio CDs

CD-R/CD-RW (Audio CDs/Discs with MP3 audio tracks/Discs with JPEG image files)

Note on playback operations of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this system playback DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

Music discs encoded with copyright protection technologies

This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Cautions when playing a disc that is recorded in Multi Session

• This system can playback Multi Session discs when an MP3 audio track is contained in the first session. Any subsequent MP3 audio tracks recorded in later sessions can also be played back.

• This system can playback Multi Session discs when a JPEG image file is contained in the first session. Any subsequent JPEG image files recorded in later sessions can also be played back.

• If audio tracks and images in audio CD format or VIDEO CD format are recorded in the first session, only the first session will be played back.

• When you playback Multi Session discs with different formats in each session, the format of the first session is recognized as the disc type. Tracks in the second and subsequent sessions are played back if they are the same formats as the first session except for audio CD and VIDEO CD format.

• CD-Rs and CD-RWs recorded in Multi Session that have not ended by “closing the session” are not supported.

Copyrights

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

4

HCD-ZX10D

TABLE OF CONTENTS

1. SERVICING NOTES ............................................ 5

2. GENERAL .............................................................. 7

3. DISASSEMBLY3-1. FLOW CHART .................................................................. 93-2. COVER (TOP) ................................................................. 103-3. CASE ................................................................................ 103-4. LOADING PANEL .......................................................... 113-5. FRONT PANEL SECTION ............................................ 113-6. BACK PANEL SECTION .............................................. 123-7. MAIN BOARD ............................................................... 123-8. BRACKET (TR) BLOCK ................................................ 133-9. DVD MECHANISM DECK ............................................ 133-10. OPTICAL TRAVERSE UNIT ......................................... 143-11. RF BOARD ...................................................................... 143-12. TAPE MECHANISM DECK ........................................... 15

4. TEST MODE ............................................................... 16

5. MECHANICAL ADJUSTMENTS ........................ 27

6. ELECTRICAL ADJUSTMENTS .......................... 27

7. DIAGRAMS7-1. BLOCK DIAGRAM – RF SERVO SECTION – ........... 297-2. BLOCK DIAGRAM

– VIDEO/CHANGER SECTION – ................................. 307-3. BLOCK DIAGRAM

– TUNER/TAPE SECTION – .......................................... 317-4. BLOCK DIAGRAM – AUDIO SECTION – ................. 327-5. BLOCK DIAGRAM – AMP SECTION – ..................... 337-6. BLOCK DIAGRAM

– PANEL/POWER SUPPLY SECTION – ....................... 347-7. PRINTED WIRING BOARD – RF BOARD – ............. 367-8. SCHEMATIC DIAGRAM – RF BOARD – ................... 377-9. PRINTED WIRING BOARD

– DMB07 BOARD (Component Side) – .......................... 387-10. PRINTED WIRING BOARD

– DMB07 BOARD (Conductor Side) – .......................... 397-11. SCHEMATIC DIAGRAM

– DMB07 BOARD (1/8) – ............................................... 407-12. SCHEMATIC DIAGRAM

– DMB07 BOARD (2/8) – ............................................... 417-13. SCHEMATIC DIAGRAM

– DMB07 BOARD (3/8) – ............................................... 427-14. SCHEMATIC DIAGRAM

– DMB07 BOARD (4/8) – ............................................... 437-15. SCHEMATIC DIAGRAM

– DMB07 BOARD (5/8) – ............................................... 447-16. SCHEMATIC DIAGRAM

– DMB07 BOARD (6/8) – ............................................... 457-17. SCHEMATIC DIAGRAM

– DMB07 BOARD (7/8) – ............................................... 467-18. SCHEMATIC DIAGRAM

– DMB07 BOARD (8/8) – ............................................... 477-19. PRINTED WIRING BOARD

– VIDEO BOARD – ......................................................... 487-20. SCHEMATIC DIAGRAM

– VIDEO BOARD – ......................................................... 497-21. PRINTED WIRING BOARDS

– CHANGER SECTION – ............................................... 50

7-23. PRINTED WIRING BOARD– MAIN BOARD – .......................................................... 51

7-24. SCHEMATIC DIAGRAM– MAIN BOARD (1/5) – .................................................. 52

7-25. SCHEMATIC DIAGRAM– MAIN BOARD (2/5) – .................................................. 53

7-26. SCHEMATIC DIAGRAM– MAIN BOARD (3/5) – .................................................. 54

7-27. SCHEMATIC DIAGRAM– MAIN BOARD (4/5) – .................................................. 55

7-28. SCHEMATIC DIAGRAM– MAIN BOARD (5/5) – .................................................. 56

7-29. PRINTED WIRING BOARDS– FRONT AMP SECTION – ............................................ 57

7-30. SCHEMATIC DIAGRAM– FRONT AMP SECTION (1/2) – ................................... 58

7-31. SCHEMATIC DIAGRAM– FRONT AMP SECTION (2/2) – ................................... 59

7-32. PRINTED WIRING BOARD– SURROUND BOARD – ............................................... 60

7-33. SCHEMATIC DIAGRAM– SURROUND BOARD – ............................................... 61

7-34. PRINTED WIRING BOARDS– PANEL SECTION (1/5) – ............................................. 62

7-35. SCHEMATIC DIAGRAM– PANEL SECTION (1/5) – ............................................. 63

7-36. PRINTED WIRING BOARD– PANEL SECTION (2/5) – ............................................. 64

7-37. SCHEMATIC DIAGRAM– PANEL SECTION (2/5) – ............................................. 65

7-38. PRINTED WIRING BOARDS– PANEL SECTION (3/5) – ............................................. 66

7-39. SCHEMATIC DIAGRAM– PANEL SECTION (3/5) – ............................................. 67

7-40. PRINTED WIRING BOARDS– PANEL SECTION (4/5) – ............................................. 68

7-41. SCHEMATIC DIAGRAM– PANEL SECTION (4/5) – ............................................. 69

7-42. PRINTED WIRING BOARDS– PANEL SECTION (5/5) – ............................................. 70

7-43. SCHEMATIC DIAGRAM– PANEL SECTION (5/5) – ............................................. 71

7-44. PRINTED WIRING BOARDS– POWER SUPPLY SECTION – ..................................... 72

7-45. SCHEMATIC DIAGRAM– POWER SUPPLY SECTION – ..................................... 73

8. EXPLODED VIEWS8-1. CASE SECTION ............................................................. 938-2. PANEL BOARD SECTION ............................................ 948-3. FRONT PANEL SECTION .............................................. 958-4. BACK PANEL SECTION ................................................ 968-5. HEAT SINK SECTION.................................................... 978-6. CHASSIS SECTION ........................................................ 988-7. DVD MECHANISM DECK SECTION-1

(CDM79B-DVBU64) ....................................................... 998-8. DVD MECHANISM DECK SECTION-2

(CDM79B-DVBU64) ..................................................... 1008-9. OPTICAL BLOCK SECTION ....................................... 101

9. ELECTRICAL PARTS LIST ............................... 102

5

HCD-ZX10DSECTION 1

SERVICING NOTES

NOTES ON HANDLING THE OPTICAL PICK-UPBLOCK OR BASE UNIT

The laser diode in the optical pick-up block may suffer electrostaticbreak-down because of the potential difference generated by thecharged electrostatic load, etc. on clothing and the human body.During repair, pay attention to electrostatic break-down and alsouse the procedure in the printed matter which is included in therepair parts.The flexible board is easily damaged and should be handled withcare.

NOTES ON LASER DIODE EMISSION CHECKThe laser beam on this model is concentrated so as to be focused onthe disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emission,observe from more than 30 cm away from the objective lens.

UNLEADED SOLDERBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

: LEAD FREE MARKUnleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40 °C higherthan ordinary solder.Ordinary soldering irons can be used but the iron tip has to beapplied to the solder joint for a slightly longer time.Soldering irons using a temperature regulator should be set toabout 350 °C.Caution: The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful!• Strong viscosity

Unleaded solder is more viscou-s (sticky, less prone to flow)than ordinary solder so use caution not to let solder bridgesoccur such as on IC pins, etc.

• Usable with ordinary solderIt is best to use only unleaded solder but unleaded solder mayalso be added to ordinary solder.

RELEASING THE DISC TRAY LOCKThe disc tray lock function for the antitheft of an demonstrationdisc in the store is equipped.

Releasing Procedure :1. Press ?/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press two buttons of x (DVD) and Z OPEN/CLOSE

simultaneously and hold down until “UNLOCKED” displayedon the fluorescent indicator tube (around 5 seconds).

Note: When “LOCKED” is displayed, the tray lock is not released byturning power on/off with the ?/1 button.

Model Name Part No.

Singapore and Malaysia models 4-252-689-6[]

Iranian model 4-252-689-7[]

Australian model 4-252-689-8[]

Mexican model 4-252-689-9[]

NOTE OF REPLACING THE DMB07 BOARDWhen replacing the DMB07 board, since the adjustment value isnot set up correctly, “Drive Auto Adjustment” can’t be performed.In this case, initialize memory in the following procedures.

Procedure:1. Set the test mode. (See page 18)2. Press the [2] key on the remote commander, and set the

“DRIVE MANUAL OPERATION”. (See page 21)3. Press the [6] key on the remote commander, and set the “2-6,

Memory Check”. (See page 23)4. Press the [CLEAR] key on the remote commander, and initialize

Memory.

• MODEL IDENTIFICATION–Back Panel–

PART No.

Ver. 1.1

6

HCD-ZX10D

DECISION TO PASS OR FAIL OF THE OPTICAL PICK-UPBLOCK

Connection:

Procedure:1. Connect an oscilloscope to test point 1 pin and 3 pin of

CN901 on the DMB07 board.2. Press the ?/1 button to turn the power on.3. Put the disc (LUV-P01) (Part No. 4-999-032-01) (CD) in to

playback.4. Confirm that oscilloscope waveform is clear and check RF

signal level is correrect or not.5. Put the disc (TDV-520CSO) (Part No. J-2501-236-A) (DVD)

in to playback.6. Perform Comfirmation in the same manner as step 4.

Note: A clear RF signal waveform means that the shape “◊” can be clearlydistinguished at the center of the waveform.

Checking Location:– DMB07 BOARD (Component Side) –

HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF

2 Pull-out the disc tray.

1 Turn the gear (chuck) in the direction of arrow A.

A

+–

oscilloscope

DMB07 board

CN901 1 pinCN901 3 pin

RF signal waveformVOLT/DIV: 200 mVTIME/DIV: 500 ns

CD: 1.05 ± 0.2 Vp-pDVD: 1.09 ± 0.2 Vp-p

1 7

CN901

7

HCD-ZX10DSECTION 2GENERAL

This section is extracted frominstruction manual.

• LOCATION OF CONTROLS

Main unit

ALBUM +/– rlAMP MENU qkCD SYNC w;CLOCK/TIMER SELECT 2 CLOCK/TIMER SET 5Deck A eaDeck B whDIRECTION ehDISC 1 ~ 5 rhDISC SKIP tdDisc tray esDISPLAY 3Display 6DOLBY PL II tfDVD MENU qjDVD TOP MENU qg

ECHO LEVEL egEFFECT ON/OFF ejENTER qhEX-CHANGE tsFLASH rgFM MODE 8FUNCTION qsGAME wsGAME INPUT AUDIO L/R

(jacks) wdGAME INPUT VIDEO (jack) wd GAME MIXING wa

ILLUMINATION rsIR (receptor) raJOG rkMEMORY 9MIC 1/MIC 2 (jacks) edMIC LEVEL efMODE t;P FILE ekPHONES (jack) wfPLAY MODE rdPower illuminator wlPreset Effect buttons 7

SALSA/REGGAE/POP/SAMBA/TANGO/ROCK/JAZZ/DANCE/MOVIE/GAME

REC PAUSE/START wgREPEAT rfSLEEP 4SPEAKERS t;SOUND FIELD r;TUNER/BAND q;TUNER ENTER qdTUNING –/+ qaTUNING MODE qfVOLUME +/– wkX-GROOVE elX-ROUND ON/OFF rj

?/1 (power) 1A Z e;Z B wjV/v/B/b qhDVD Function:Z OPEN/CLOSE taNX (play/pause) rlx (stop) rlm/M (rewind/fast forward) rl

./> (go backward/go forward) rl

TAPE A function:h/H (play) ehx (stop) eh.m/M> ehTAPE B function:h/H (play) qlx (stop) ql.m/M> ql

ALPHABETICAL ORDER

A – D

E – H

I – Q

R – Z

SYMBOLS

HS s

PLAYMODE

R

wgwhwjwke; wlea

qh

qfqg

qjqkqlw;wa

wdws

wf

qd

rlrkrjrhrgrfrd

tdtf ts ta t;

rs

1

rar;

ekel

ef

ed

es

ehej

23456 7 89q; qa qs

eg

8

HCD-ZX10D

Remote control

ALBUM + 7ALBUM – qaANGLE qkAUDIO qkBAND wgCLEAR wlCLOCK/TIMER SELECT e; CLOCK/TIMER SET e;DISC SKIP wfDISPLAY waDVD DISPLAY whDVD MENU 7DVD SETUP wsDVD TOP MENU qaENTER wj

FM MODE 5FUNCTION +/– q;KARAOKE/MPX qfKEY CONTROL #/2 9Numeric buttons qdPLAY MODE 4REPEAT 5SLEEP qhSLOW / w;

SOUND FIELD +/– wdSUBTITLE qkTUNER MEMORY 3TUNING MODE 4TUNING +/– wkTV CH +/– qgTV/VIDEO eaTV VOL +/– 2TV ?/1 qjVOLUME +/– 8

?/1 (power) 1nN (play) 6X (pause) 6x (stop) 6>10 qsO RETURN ql

m (rewind) w;M (fast forward) w;V/v/B/b wj. (go backward) wk> (go forward) wk

ALPHABETICAL ORDER

A – E F – Z

SYMBOLS

O

bB

V

v

+

+

–

– +–

+–

+

–

+

–

+

–

+

–

XbB

yy +– yy

x

m M. >

O

bB

V

v

+

–

+

–

+

–

+

–

+

–

XbB x

m M. >

ws

1

wk

qa

wd

2qg

qh

qf

qs

qd

3

4

5

6

7

8

90

qj

qk

w;

wa

ql

e;

ea

wl

wf

wgwhwj

1 Press ?/1 to turn on the system.

2 Press CLOCK/TIMER SET.

“CLOCK” appears in the display. Then, the hour indication flashes in the display.

3 Press V or v repeatedly to set the hour.

4 Press ENTER.

The minute indication flashes in the display.

5 Press V or v repeatedly to set the minute.

6 Press ENTER.

The clock starts functioning.

To adjust the clock

1 Press CLOCK/TIMER SET.“SET” appears in the display, then “PLAY SET?” flashes in the display.

2 Press V or v repeatedly to select “CLOCK SET?”, then press ENTER.The hour indication flashes in the display.

3 Do the same procedures as step 3 to 6 above.

Notes• The clock settings are canceled when you disconnect

the power cord or if a power failure occurs.

• You cannot set the clock in Power Saving Mode.

Setting the clock

9

HCD-ZX10D

• This set can be disassembled in the order shown below.

3-1. FLOW CHART

SECTION 3DISASSEMBLY

3-2. COVER (TOP)(Page 10)

3-3. CASE(Page 10)

3-4. LOADING PANEL(Page 11)

3-5. FRONT PANEL SECTION(Page 11)

3-6. BACK PANEL SECTION(Page 12)

3-7. MAIN BOARD(Page 12)

3-8. BRACKET (TR) BLOCK(Page 13)

3-9. DVD MECHANISM DECK(Page 13)

3-10. OPTICAL TRAVERSE UNIT(Page 14)

3-11. RF BOARD(Page 14)

3-12. TAPE MECHANISM DECK(Page 15)

SET

10

HCD-ZX10D

Note: Follow the disassembly procedure in the numerical order given.

3-2. COVER (TOP)

3-3. CASE

1 three screws(BVTP3 × 8)

3 cover (top)

2 Push the cover (top) in the direction of arrow A, and release six claws.

A

2 three screws(case 3 TP2)

4 case

3 four screws(BVTP3 × 8)

1 three screws(case 3 TP2)

11

HCD-ZX10D

3-4. LOADING PANEL

3-5. FRONT PANEL SECTION

1 Rotate the gear (chuck) in the direction of arrow A.

A

B

2 Pull-out the tray in the direction of arrow B.

3 loading panel

2 connector (CN920)

4 lead wire

6 front panel section

5 eight screws(BVTP3 × 8)

3 screw(BVTP3 × 8)

2 three connectors(CN801, 802, 803)

1 two wires (flat type)(CN104: 13 core, CN507: 21 core)

2 two connectors

12

HCD-ZX10D

3-6. BACK PANEL SECTION

3-7. MAIN BOARD

2 connector(CN1200)

1 wire (flat type)(17 core) (CN1202)

4 VIDEO board

1 wire (flat type)(11 core) (CN504)

3 four screws(BVTP3 × 8)

5 two screws(BVTP3 × 8)

6 three screws(BVTP3 × 8)

7 ten screws(BVTP3 × 8)

8 four screws(BVTP3 × 8)

qa back panel section

0 connector(CN513)

2 three connectors(CN1000, 1002, 1004)

9

6 connector(CN506)

5 wire (flat type)(21 core) (CN503)

1 wire (flat type)(7 core) (CN404)

2 connector(CN502)

7 MAIN board

3 two screws(BVTP3 × 8)

4 two connectors(CN601, 602)

13

HCD-ZX10D

3-8. BRACKET (TR) BLOCK

3-9. DVD MECHANISM DECK

4 connector

6 two screws(BVTP3 × 8)

7 bracket (TR) block

1 wire (flat type)(29 core) (CN501)

5 three screws(BVTP3 × 8)

2 Rotate the gear (chuck) in the direction of arrow A.

3

A

3 two screws(BV3)

4 two screws(BV3)

5 DVD mechanism deck

1 Rotate the gear (chuck) in the direction of arrow A.

A

2

14

HCD-ZX10D

3-10. OPTICAL TRAVERSE UNIT

3-11. RF BOARD

5 optical traverse unit

3 three step screws (M)

2 chuck assy

1 two screws(BVTP3 × 8)

4 flexible flat cable(24 core)

3 flexible flat cable(24 core) (CN001)

2 flexible board(CN003)

1 two screws(BTP2.6 × 10)

5 RF board

4 wire (flat type)(29 core) (CN002)

15

HCD-ZX10D

3-12. TAPE MECHANISM DECK

3 tape mechanism deck

1 five screws(BVTP2.6 × 8)

2 lead wire

16

HCD-ZX10DSECTION 4TEST MODE

GC TEST MODEThis mode is used to check the fluorescent indicator tube, LED,model, destination, software version, volume, key, jog and VACSlevel.Procedure:

1. Press three buttons of x (TAPE B), [TUNER ENTER] , and[DISC 2] simultaneously.

2. All LEDs and segments in fluorescent indicator tube are lightedup.

3. When you want to enter the software version display mode,press the [DISC 1] button. The model and destination are dis-played.

4. Each time [DISC 1] button is pressed, the display changes fromMC version, GC version, CD version, ST version, TC version,TA version, TM version in this order, and returns to the MCversion display.

5. When [DISC 3] button is pressed while the version numbers arebeing displayed except model and destination, the date of thesoftware creation appear. When [DISC 3] button is pressed again,the display returns to the software version display. When[DISC 1] button is pressed while the date of the software creationis being displayed, the date of the software creation is displayedin the same order of software version display.

6. Press the [DISC 2] button, the key check mode is activated.7. In the key check mode, the fluorescent indicator tube displays

“K 0 J0 V0”. Each time a button is pressed, “K” valueincreases. However, once a button has been pressed, it is nolonger taken into account.

8. When [DISC 3] button is pressed after all LEDs and segmentsin fluorescent indicator tube light up, the fluorescent indicatortube displays “VACS A APBB”. A is VACS level which istrigger by signal level while BB is VACS level which is triggerby APVACS (Abuse Protection VACS).

9. When [EX-CHANGE] button is pressed after all LEDs andsegments in fluorescent indicator tube light up, alternatesegments in fluorescent indicator tube would light up. If youpress [EX-CHANGE] button again, another half of alternatesegments in fluorescent indicator tube would light up. Pressing[EX-CHANGE] button again would cause all segments lights up.

10. To release from this mode, press three buttons in the samemanner as step 1, or disconnect the power cord.

MC TEST MODEThis mode is used to check operations of the respective sections ofamplifier, tuner, and tape.Procedure:• To enter MC test mode

1. Press three buttons of x (TAPE B), [TUNER ENTER] , and[DISC 3] simultaneously.

2. The 4 speaker symbols and CD ring indicators flash on thefluorescent indicator tube. The function is changed to“VIDEO”.

• Check of amplifier1. When [ENTER] button is pushed with the up side, GEQ

increases to its maximum and a message “GEQ MAX” appearson the fluorescent indicator tube.

2. When [ENTER] button is pushed with the down side, GEQdecreases to its minimum and a message “GEQ MIN” appearson the fluorescent indicator tube.

3. When [ENTER] button is pushed with the left side or ENTER

button is pushed with the right side, GEQ is set to flat and amessage “GEQ FLAT” appears on the fluorescent indicatortube.

4. When the [VOLUME] knob is turned clockwise even slightly,the sound volume increases to its maximum and a message“VOLUME MAX” appears on the fluorescent indicator tube.

5. When the [VOLUME] knob is turned counterclockwise evenslightly, the sound volume decreases to its minimum and amessage “VOLUME MIN” appears on the fluorescentindicator tube.

• Tape function1. When a tape is inserted in deck-B and recording is started, the

function is changed to “VIDEO” automatically. When[CD SYNC] button is pressed during recording in function, ALC(Automatic Logic Control) is turned on.

2. During recording, press the . m (TAPE B) button willstop the recording and the function is changed to “TAPE B”and rewind the tape in deck-B until the recording start positionand playback of the tape is started. If the [REC PAUSE/START]

button is pressed for a pause and pressed again to resumerecording during recording time, when the tape is rewind, thetape will be rewind until the position where the pause is applied.

• AMS test mode1. Press the [FUNCTION] button to select the “TAPE A” or “TAPE

B”.2. Press the [DIRECTION] button to select loop or relay mode.

Insert a test tape AMS-110A or AMS-120 to selected tapedeck.

3. Press the [AMP MENU] button to enter the AMS test mode.4. After the test tape is rewind to the beginning of the tape, the

AMS+ is checked, and the mechanism is shut off after detectingthe AMS signal twice.

5. Then the AMS– is checked and the mechanism is shut offafter detecting the AMS signal twice.

6. When the check is complete, a message of either “OK” or“NG” appears on the fluorescent indicator tube.

• To release MC test mode1. To release from this mode, press the I/1 button.2. The cold reset is enforced at the same time.

COLD RESETThe cold reset clears all data including preset data stored in theRAM to initial conditions. Execute this mode when returning theset to the customer.Procedure:

1. Press three buttons of x (TAPE B), [TUNER ENTER] , and I/1 simultaneously.

2. The fluorescent indicator tube becomes blank for a while, andthe set is reset.

VACS ON/OFFThis mode is used to switch on and off the VACS (VariableAttenuation Control System).Procedure:

1. Press the I/1 button to turn the power on.2. Press two buttons of [PLAY MODE] and I/1 simultaneously.

The message “VACS OFF” or “VACS ON” appears on thefluorescent indicator tube.

AM STEP CHANGEThe step interval of AM channels can be toggled between 9 kHzand 10 kHz.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [TUNER/BAND] button to select the “AM”.3. Press the I/1 button to turn the power off.4. Press two buttons of [TUNER ENTER] and I/1 simultaneously.

The system will turn on automatically. The message “AM 9kSTEP” or AM 10k STEP” appears on the fluorescent indicatortube and thus the channel step is changed.

17

HCD-ZX10D

CD TRAY LOCK MODEThis mode let you lock the disc tray. When this mode is activated,the disc tray will not open when Z OPEN/CLOSE button or[EX-CHANGE] button is pressed. The message “LOCKED” will bedisplayed in on the fluorescent indicator tube.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press two buttons of x (DVD) and Z OPEN/CLOSE simul-

taneously and hold down until “LOCKED” or “UNLOCKED”displayed on the fluorescent indicator tube (around 5 seconds).

VIDEO/SAT SWITCHINGThis mode let you switch from VIDEO to SAT and vice-versa.Procedure:

1. Set to the power off state.2. Press two buttons of [FUNCTION] and I/1 simultaneously.

The set power on automatically and the function will changedto SAT. Do the same procedures again to change from SAT toVIDEO.

DVD COLOR SYSTEM SWITCHINGThis mode let you change the color system of the video output fromPAL to NTSC or vice-versa.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press the I/1 button to turn the power off.4. Press two buttons of x (TAPE B) and I/1 simultaneously.

The set will power on automatically.5. The message “COLOR SYSTEM PAL” or “COLOR

SYSTEM NTSC” will be displayed on the fluorescentindicator tube

DVD PROGRESSIVEThis mode let you change the video signal format from progressiveformat to interlace format if you accidentally change theCOMPONENT OUT settings in DVD SETUP MENU to progressiveand your TV cannot accept progressive signal.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press two buttons of x (DVD) and [DVD MENU] simul-

taneously.

REPEAT 5 LIMIT OFF MODEThe number of repeat for disc playback is 5 times when the repeatmode is “REPEAT ALL”. This mode enables the disc to repeatplayback for limitless times.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press three buttons of x (TAPE B), [TUNER ENTER] , and

[REPEAT] simultaneously to enter the repeat 5 limit off modeand the fluorescent indicator tube displays “LIMIT OFF”.

4. To release from this mode, operate the cold reset.

DVD SHIP MODE (WITH MEMORY CLEAR)This mode moves the optical pick-up to the position durable tovibration and clears all data including preset data stored in the RAMto initial conditions. Use this mode when returning the set to thecustomer after repair.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press two buttons of [EX-CHANGE] and I/1 simultaneously.

The set will power off automatically.4. After the “STANDBY” blinking display finish, a message

“LOCK” is displayed on the fluorescent indicator tube andthe DVD ship mode is set.

DVD SHIP MODE (WITHOUT MEMORY CLEAR)This mode moves the optical pick-up to the position durable tovibration. Use this mode when returning the set to the customerafter repair.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press two buttons of [REPEAT] and I/1 simultaneously. The

set will power off automatically.4. After the “STANDBY” blinking display finish, a message

“LOCK” is displayed on the fluorescent indicator tube andthe DVD ship mode is set.

DVD POWER MANAGEThis mode let you switch on or off power supply to the ZIVA duringtuner function.When DVD power is set to off, the power supply to the ZIVA is cutoff during tuner function. It will increase the time taken to accessdisc when function change from tuner to DVD but it will improvetuner reception performance.When DVD power is set to off, the power supply to the ZIVA is notcut off during tuner function. It will reduce the time taken to accessdisc when function change from tuner to DVD but it will decreasetuner reception performance.Procedure:

1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press the I/1 button to turn the power off.4. Press two buttons of x (DVD) and I/1 simultaneously. The

set will power on automatically.5. The message “DVD POWER ON” or “DVD POWER OFF”

will be displayed on the fluorescent indicator tube.

18

HCD-ZX10D

DVD SECTION

DVD TEST MODE GENERAL DESCRIPTIONThis mode let you make diagnosis and adjustment easily by usingthe remote commander and monitor TV. The instructions, diagnosticresults, etc. are given on the on-screen display (OSD).

• Test Disc ListUse the following test disc on test mode.TDV-520CSO (DVD-SL): Part No. J-2501-236-ALUV-P01 (CD) : Part No. 4-999-032-01TDV-540C (DVD-DL) : Part No. J-2501-235-ANote: Do not use existing test disc for DVD.

STARTING DVD TEST MODE1. Press the I/1 button to turn the power on.2. Press the [FUNCTION] button to select the “DVD”.3. Press two buttons of x (DVD) and Z OPEN/CLOSE

simultaneously, and then turn the [VOLUME] knob clockwise.4. The message “SERVICE IN” will be displayed on the

fluorescent indicator tube and the Test Mode Menu is displayedon the on-screen display on the monitor TV as follows. Themodel name and revision number is displayed at the bottomof the on-screen display

Test Mode Menu

0. Syscon Diagnosis1. Drive Auto Adjustment2. Drive Manual Operation3. Mecha Aging4. Emergency History5. Mecha Error History6. Version Information7. Video Level Adjustment Exit: POWER KeyModel :LBT-ZX10D xxRevision :x.xx

5. To execute each function, press its number by using numericbutton on the remote commander (RM-SD5).

6. To release from this mode, press the I/1 button to turn thepower off.

OPERATING DVD TEST MODE

0. Syscon DiagnosisThe same contents as board detail check by serial interface can bechecked from the remote commander operation.On the Test Mode Menu screen, press [10/0] key on the remotecommander, and the following Check Menu will be displayed.

### Syscon Diagnosis ###

Check Menu0. Quit1. All2. Version3. EEPROM4. GPIO5. SD Bus6. Video

0-0. QuitQuit the Syscon Diagnosis and return to the Test Mode Menu.

0-1. All (All items continuous check)This menu checks all diagnostic items continuously. Normally, allitems are checked successively one after another automaticallyunless an error is found, but at a certain item that requires judgmentthrough a visual check to the result, the following screen is displayedfor the key entry.

Example display

### Syscon Diagnosis ###

Diag All Check No.2 Version

2-2. VersionROM Reversion = X.XX

Press NEXT Key to ContinuePress PREV Key to Repeat

For the ROM check, the check sum calculated by the syscon isoutput, and therefore you must compare it with the specified valuefor confirmation.Following the message, press the > button to go to the next item,or press the . button to repeat the same operation again.To quit the diagnosis and return to Check Menu screen, press the[RETURN] key on the remote commander to display Check Menu.

• Error occurredIf an error occurred, the diagnosis is suspended and error is displayed.Press the [RETURN] key on the remote commander to quit thediagnosis, or press the . button to repeat the same check wherean error occurred, or press the > button to continue the checkfrom the item next to faulty item.

19

HCD-ZX10D

General Description of Checking MethodSelecting 2 and subsequent items call the submenu screen of eachitem. And selecting 2 and subsequent items execute respective menusand outputs the results.For the contents of each submenu, see “Check Items List” as below.

Check Items List:0-2. Version

0-2-1. All0-2-2. Revision0-2-3. ROM Check Sum0-2-4. Model Type0-2-5. Region

0-3. EEPROM Check0-3-1. Sampling Check0-3-2. Detail Check

0-4. GP I/O Check0-5. SD Bus Check0-6. Video Check

0-2. Version0-2-2. Revision

The revision number of ROM IC205 that the program forthe DVD system processor (IC207) is stored.

0-2-3. ROM Check SumCheck sum is calculated. (4 digits hexadecimal number)

0-2-4. Model TypeModel name is displayed. (LBT-ZX10D)

0-2-5. RegionModel destination code is displayed. (2 digits number)

0-3. EEPROM Check0-3-1. Sampling Check

EEPROM check at every 64 words.It compares read data with write data of each address. Whenthere are discrepancies between two data, it displays error.

0-3-2. Detail CheckEEPROM check at every 1 word.It compares read data with write data of each address. Whenthere are discrepancies between two data, it displays error.

0-4. GP I/O CheckPull up/down setting check of the DVD system processor (IC207)pin 150, 151 and 154 (for clock setting port).

0-5. SD Bus CheckSD bus data check between DVD decoder (IC701) and D-RAM(IC706).

0-6. Video CheckOutput the color bars for video level adjustment.

1. Drive Auto AdjustmentOn the Test Mode Menu screen, press the [1] key on the remotecommander, the Adjustment Menu will be displayed.

## Drive Auto Adjustment ## Adjustment Menu

0. ALL1. DVD-SL2. CD3. DVD-DL

Exit: RETURN

Normally, [10/0] is selected to adjust DVD (single layer), CD andDVD (dual layer) in this order. But, individual items can be adjustedfor the case where adjustment is suspended due to an error. In thismode, the adjustment can be made easily through the operationfollowing the message displayed on the screen. The disc used foradjustment must be the one specified for adjustment.

1-0. ALLPress the 10/0 key on the remote commander, and the servo set datain EEPROM will be initialized. Then, DVD-SL disc, CD disc, andDVD-DL disc are adjusted in this order. Each time one disc wasadjusted, it is ejected. Replace it with the specified disc followingthe message. You can finish the adjustment by pressing the [RETURN]key on the remote commander.

Note: During adjustment of each disc, the measurement for disc typejudgment is made. As automatic adjustment does not judge the disctype unlike conventional models, take care not to insert wrong typediscs. Also, do not give a shock during adjustment.

20

HCD-ZX10D

1-1. DVD-SL (single layer)Press the [1] key on the remote commander and insert a DVD singlelayer disc following the message. Then the adjustment will be madethrough the steps below, then adjusted values will be written to theEEPROM.

DVD Single Layer Disc Adjustment Steps:1. Sled tilt reset2. Disc check memory SL3. Wait 300 msec4. Set disc type SL5. LD on6. Spindle start7. Wait 1 sec8. Focus servo on 09. Auto track offset adjust10. CLVA on11. Wait 500 msec12. Tracking on13. Wait 1 sec14. Sled on15. Check CLV on16. Auto LFO adjust17. Auto focus offset adjust18. Auto tilt position adjust19. Auto focus gain adjust20. Auto focus offset adjust21. EQ boost adjust22. Auto loop filter offset adjust23. Auto track gain adjustSearch check

24. 32 track jump forward25. 32 track jump reverse26. 500 track jump forward27. 500 track jump reverse

28. All servo stop29. EEP copy loop

1-2. CDPress the [2] key on the remote commander and insert a CD discfollowing the message. Then the adjustment will be made throughthe steps below, then adjusted values will be written to the EEPROM.

CD Adjustment Steps:1. Sled tilt rest2. Disc check memory CD3. Wait 500 msec4. Set disc type CD5. LD on6. Spindle start7. Wait 500 msec8. Focus servo on 09. Auto track offset adjust10. CLVA on11. Wait 500 msec12. Tracking on13. (TC display start)14. Wait 1 sec15. Jitter display start16. Sled ON17. Check CLV on18. Auto loop filter offset adjust19. Auto focus offset adjust20. Auto focus gain adjust21. Auto focus offset adjust22. EQ boost adjust23. Auto LFO adjust24. Auto track gain adjustSearch check

25. 32 track jump forward26. 32 track jump reverse27. 500 track jump forward28. 500 track jump reverse

29. All servo stop

21

HCD-ZX10D

1-3. DVD-DL (dual layer)Press the 3 key on the remote commander and insert a DVD duallayer disc following the message. Then the adjustment will be madethrough the steps below, then adjusted values will be written to theEEPROM.

DVD Dual Layer Disc Adjustment Steps:1. Sled tilt reset2. Disc check memory DL3. Wait 500 msec4. Set disc type DL5. LD on6. Spindle start7. Wait 1 sec

Layer 1 Adjust8. Focus servo on 09. Auto track offset adjust10. CLVA on11. Wait 500 msec12. Tracking on13. Wait 500 msec14. Sled on15. Check CLV lock16. Auto loop filter offset adjust, Auto focus adjust17. Auto focus gain adjust18. Auto focus offset adjust19. EQ boost adjust20. Auto loop filter offset adjust21. Auto Track Gain AdjustSearch check

22. 32 track jump forward23. 32 track jump reverse24. 500 track jump forward25. 500 track jump reverse

Layer 0 Adjust26. Focus jump (L1 → L0)27. Auto track offset adjust L028. CLVA on29. Wait 500 msec30. Tracking on31. Wait 500 msec32. Sled on33. Check CLV lock34. Auto focus filter offset Adjust35. Auto Focus Adjust36. Auto focus gain adjust37. Auto focus offset adjust38. EQ boost adjust39. Auto Loop Filter Offset40. Auto track gain adjustSearch check

41. 32 track jump forward42. 32 track jump reverse43. 500 track jump forward44. 500 track jump reverse

Layer Jump check45. Layer jump (L0 → L1)46. Layer jump (L1 → L0)

47. All servo stop

2. Drive Manual OperationNote: This mode is used for design, and not used in service fundamentally.

On the Test Mode Menu screen, press the [2] key on the remotecommander, and the Operation Menu will be displayed. For themanual operation, each servo on/off control and adjustment can beexecuted manually.

## Drive Manual Operation ## Operation Menu1. Disc Type2. Servo Control3. Track/Layer Jump4. Non EEPROM Write Adjust5. EEPROM Write Adjust6. Memory Check7. Disc Check Memory8. Error Rate Display9. SACD Water Mark

Exit: RETURN

In using the manual operation menu, take care of the followingpoints. These commands do not provide protection, thus requiringcorrect operation. The sector address or time code field is displayedwhen a disc is loaded.

Note:1. Set correctly the disc type to be used on the Disc Type screen.2. In case of an alarm, immediately press the x button to stop the

servo operation, and press the I/1 button to turn the power off.

Basic operation:(controllable from front panel or remote commander)I/1 : Power off (release the test mode)x : Servo stopZ OPEN/CLOSE : Stop and eject/loading[RETURN] : Return to Operation Menu or Test Mode Menu. , > : Transition between sub modes of menu

[1] to [9] , [10/0] : Selection of menu itemsCursor v / V : Increase/Decrease in manually adjusted value

22

HCD-ZX10D

2-1-3. Disc Type CDIt sets up so that it may judge as a disc type of specification of thedisc with which the set was inserted.

[1]: CD disc (normal speed, 12 cm)[2]: CD disc (double speed, 12 cm)[3]: CD disc (normal speed, 8 cm)[4]: CD disc (double speed, 8 cm)[5]: CD-RW disc (normal speed, 12 cm)[6]: CD-RW disc (double speed, 12 cm)[7]: CD-RW disc (normal speed, 8 cm)[8]: CD-RW disc (double speed, 8 cm)

2-1-4. Disc Type HybridIt sets up so that it may judge as a disc type of specification of thedisc with which the set was inserted.

[1]: SACD Hybrid disc (SACD layer, 12 cm)[2]: SACD Hybrid disc (CD layer, normal speed, 12 cm)[3]: SACD Hybrid disc (CD layer, double speed, 12 cm)[4]: SACD Hybrid disc (SACD layer, 8 cm)[5]: SACD Hybrid disc (CD layer, normal speed, 8 cm)[6]: SACD Hybrid disc (CD layer, double speed, 8 cm)

2-2. Servo ControlNote: Be sure to perform the disc type setup before performing this item.

Servo Control1. LD off R.Sled FWD2. Focus off L.Sled REV3. SPDL off U.Sled Reset4. CLVA off D.Sled Limit5. Trk. off6. Sled off7. Fcs.Srch off

0. All Servo Off

Exit: RETURN

On this screen, the servo on/off control necessary for replay isexecuted. Normally, turn on each servo from 1 sequentially andwhen CLVA is turned on, the usual trace mode becomes active. Inthe trace mode, DVD sector address or CD time code is displayed.This is not displayed where the spindle is not locked. The spindlecould run overriding the control if the spindle system is faulty orRF is not present. In such a case, do not operate CLVA.

[1] LD : Turn on/off the laser.[2] Focus : Search the focus and turn on the focus.[3] SPDL : Turn on/off the spindle.[4] CLVA : Turn on/off normal servo of spindle servo.[5] Trk. : Turn on/off the tracking servo.[6] Sled : Turn on/off the sled servo.[7] FCS. Srch : Turn on/off the focus search.[10/0] : All servo off.b Sled FWD (right cursor) : Move the sled forward.B Sled REV (left cursor) : Move the sled reverse.V Sled FWD (up cursor) : Reset the sled.v Sled REV (down cursor) : Limit in the sled.

2-1. Disc Type

Disc Type

Disc Type Select

1. Disc Type Auto Check2. Set Disc Type DVD3. Set Disc Type CD4. Set Disc Type Hybrid

Exit: RETURN

2-1-1. Disc Type Auto Check1. Press the [1] key on the remote commander to display the Disc

Type Auto Check screen.2. Insert a disc and press the [ENTER] key on the remote

commander.3. It judges the type of inserted disc automatically and displays

the disc type and so on as below.

Disc Type Auto Check

Disc Type xxLayer xxMirr Time xxMirr Count xxFZC Count xxPI Reference xxPI Peak xx

ENTER.Execute

Exit: RETURN

Disc Type : CD, DVD or Hybrid (SACD)Layer : SINGLE, DUAL or HYBRIDMirr Time : Mirror time of between disc surface and record

surface when disc type judgment. (hexadecimalnumber)

Mirr Count : The number of times which mirror counts betweendisc surface and record surface when disc typejudging.

FZC Count : The number of times which focus zero cross pointsof each layer when lens down.

PI Reference : The average of PI reference voltage. (hexadecimalnumber)

PI Peak : PI peak level voltage. It performs only when disctype judgment is successful. (hexadecimal number)

2-1-2. Disc Type DVDIt sets up so that it may judge as a disc type of specification of thedisc with which the set was inserted.

[1]: DVD single layer disc (12 cm)[2]: DVD dual layer disc (0 layer, 12 cm)[3]: DVD dual layer disc (1 layer, 12 cm)[4]: DVD-RW disc (12 cm)[5]: DVD single layer disc (8 cm)[6]: DVD dual layer disc (0 layer, 8 cm)[7]: DVD dual layer disc (1 layer, 8 cm)[8]: DVD-RW disc (8 cm)

23

HCD-ZX10D

2-5. EEPROM Write Adjust

EEPROM Write Adjust

1. Focus Offset2. Focus Gain3. Trk. Offset Coarse4. ------------5. Trk. Gain6. EQ Boost

0. All Servo Off

Exit: RETURN

On this screen, each item can be adjusted automatically. Select thedesired number [1] to [10/0] from the remote commander, andselected item is adjusted automatically.

[1] Focus Offset : Adjusts focus offset.[2] Focus Gain : Adjusts focus gain.[3] TRK. Offset Coarse : Adjusts tracking offset of the RF

amplifier (IC001) side.[5] TRK. Gain : Adjusts track gain.[6] EQ Boost : Adjusts amount of boost of

equalizer.[10/0] : All servo off.

2-6. Memory CheckDisplay images are shown as follows, and all two screens are ableto switch by the V key (UP) or v key (DW).

EEPROM Data 1/2 CD SL L0 L1Focus Gain xx xx xx xxTrk. Gain xx xx xx xxFocus Offset xx xx xx xxTrk. Offset xx xx xx xxEQ. Boost xx xx xx xxPI Level xx xx -- --Fcs. Balance -- xx -- --Jitter xx xx xx xxMirror Time xx xx xx --FE Level -- xx -- --Traverse Lv1. -- xx -- --Next:DW Default:CLR Exit:RET

EEPROM Data 2/2 CDRW DVDRWFocus Gain xx xxTrk. Gain xx xxFocus Offset xx xxTrk. Offset xx xxEQ. Boost xx xx

Prev:UP Default:CLR Exit:RET

On this screen, current servo adjusted data stored in the EEPROMare displayed. The adjusted data are initialized by pressing the[CLEAR] key, but be careful that they are not recoverable afterinitialization.Before clearing the adjusted data, make a note of the set data. Thisscreen will also appear if “0. ALL” is selected in the Drive AutoAdjustment. In this case, default setting cannot be made.

2-3. Track/Layer Jump

Track/Layer Jump1. 1Tj FWD2. 1Tj REV3.500Tj Fine FWD4.500Tj Fine REV5.10kTj Dirc FWD6.10kTj Dirc REV7.20kTj Dirc FWD8.20kTj Dirc REV

0.All Servo Off

Exit: RETURN

On this screen, track jump, etc. can be performed. Only for the DVDdual layer disc, the focus jump and layer jump are displayed in theright field

[1] 1Tj FWD : 1 track jump forward.[2] 1Tj REV : 1 track jump reverse.[3] 500Tj FWD : 500 track jump (fine search)forward.[4] 500Tj REV : 500 track jump (fine search) reverse.[5] 10kTj FWD : 10k track jump (direct search) forward.[6] 10kTj REV : 10k track jump (direct search) reverse.[7] 20kTj FWD : 20k track jump (direct search) forward.[8] 20kTj REV : 20k track jump (direct search) reverse.[10/0] : All servo off.

2-4. Non EEPROM Write Adjust

Non EEPROM Write Adjust

1. Focus Offset2. Focus Gain3. Trk. Offset Coarse4. Trk. Offset Fine5. Trk. Gain6. EQ Boost

0. All Servo Off

Exit: RETURN

On this screen, each item can be adjusted automatically. Select thedesired number [1] to [10/0] from the remote commander, and currentsetting for the selected item will be displayed, then increase ordecrease numeric value with the V key or v key. This value isstored in the EEPROM. If CLV has been applied, the jitter isdisplayed for reference for the adjustment.

[1] Focus Offset : Adjusts focus offset.[2] Focus Gain : Adjusts focus gain.[3] TRK. Offset Coarse : Adjusts tracking offset of the RF

amplifier (IC001) side.[4] TRK. Offset Fine : Adjusts tracking offset of the DSP

(IC401) side.[5] TRK. Gain : Adjusts track gain.[6] EQ Boost : Adjusts amount of boost of

equalizer.[10/0] : All servo off.

24

HCD-ZX10D

3. Mecha AgingOn the Test Mode Menu screen, selecting [3] executes the aging ofthe mechanism deck.

### Aging Test MENU ### ** Pls use over 40min.CD ** Operation Menu

1. Open/Close Test

Exit: RETURN

1. On the Aging Test MENU screen, press the [1] key on theremote commander to display the Open/Close Test screen.

2. Insert discs and press the [ENTER] key on the remotecommander.

3. Is starts the aging.During aging, the disc number, operating status and repeatcycle are displayed. Aging can be aborted at any time bypressing the [RETURN] key. After the operation is stopped,press the [RETURN] key to return to the Aging Test MENU.

2-7. Disc Check Memory

Disc Check Memory

1. SL Disc check2. CD Disc check3. DL Disc check

Exit: RETURN

On this screen, measure the mirror time of chucked disc, and writeto the EEPROM.

2-8. Error Rate Display

Error Rate Display UC CR AddressPI1 Err Now xx xxxx xxxxxxxx Max xx xxxx xxxxxxxx Avg xx xxxx xxxxxxxxPI2 Err Now xx xxxx xxxxxxxx Max xx xxxx xxxxxxxx Avg xx xxxx xxxxxxxxPO Err Now xx xxxx xxxxxxxx Max xx xxxx xxxxxxxx Avg xx xxxx xxxxxxxx

Exit: RETURN

On this screen, measure and display the error rate.

UC : Incorrect valueCR : Correct value

2-9. SACD Water Mark Check

SACD Water Mark Check

PSP AMP PSN

Adjust Error Failed Start: ENTER Stop: RETURN

On this screen, measure the PSP AMP value and PSN value of SACDwater mark.

25

HCD-ZX10D

5. Mecha Error HistoryOn the Test Mode Menu screen, selecting [5] displays theinformation of mechanism deck error history.The history information from last 1 up to 8 can be scrolled withthe V key or v key. Also, specific information can be displayedby directly entering that number with ten keys.

### Mecha Error History ###

1. aa bb cc xx xx xx xx xx 2. aa bb cc xx xx xx xx xx 3. aa bb cc xx xx xx xx xx 4. aa bb cc xx xx xx xx xx 5. aa bb cc xx xx xx xx xx 6. aa bb cc xx xx xx xx xx 7. aa bb cc xx xx xx xx xx 8. aa bb cc xx xx xx xx xx

Scroll:UP/DOWN(1.Latest Err.) Exit: RETURN

aa : Initialization is completed or not.FF : Complete.other number : Not complete.

bb : Operating status of mechanism deck at an error occurred.(lod sq jcp)00 : Initializing.10 to 15 : Open operating.16 to 19 : Kicking cause open failed.1A to 1F : Open operating.20 to 27 : Complete the open operation.28 : No disc and complete the open operation.29 to 2F : Complete the open operation.30 to 3F : Close requesting.40 to 4F : Open requesting.50 to 5F : Close operating.60 to 6F : Complete the chucking operation.80 to 8F : Complete the release operation.

(BU is home position)90 to 9F : BU down operating.A0 to AF : Opening/closing the shutter. Or stationary state

in open/close the shutter is enablement.B0 to BF : BU up requesting.C0 to CF : BU down requesting.D0 to DF : BU upping.E0 to EF : No disc checking in disc loading.

cc : Operating status of mechanism deck at an error occurred.(lod op jcp)00 : Complete the operation.10 to 1F : Open operating.20 to 2F : Close operating.30 to 3F : Release operating.60 to 6F : Chucking operating.70 to 7F : Kicking operating.80 to 8F : Returning the BU to home position. (after

kicking)

4. Emergency HistoryOn the Test Mode Menu screen, selecting [4] displays theinformation such as servo emergency history. The historyinformation from last 1 up to 10 can be scrolled with the V keyor v key. Also, specific information can be displayed by directlyentering that number with ten keys.

### EMG. History ###

Laser Hours CD xxxxhxxm DVD xxxxhxxm

a. bb xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

a. bb xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

Select:1-9 Scroll:UP/DOWN (1.Latest EMG.) Exit: RETURN

xxxxhxxm : The laser on total hours. Data below minutes areomitted.

a. : Error number.bb : Error code.xx : Not used.

• Clearing History InformationClearing laser hours:

Press the [DVD DISPLAY] and [CLEAR] keys in this order.Then both CD and DVD data are cleared.

Clearing emergency history:Press the [DVD TOP MENU] and [CLEAR] keys in this order.

Initializing set up data:Press the [DVD MENU] and [CLEAR] keys in this order.The data have been initialized when “Set Up Initialize” messageis displayed, the EMG. History screen will be restored soon.

• Code list of Emergency History10: Communication to RF amplifier (IC001) failed.11: Each servo for focus, tracking, and spindle is unlocked.12: Check sum error of EEPROM (IC204).14: Communication to servo DSP (IC509) failed, or servo DSP

(IC509) is faulty.15: Communication to DVD decoder (IC701) failed, or DVD

decoder (IC701) is faulty.16: Communication to DSD decoder (not used) failed, or DSD

decoder (not used) is faulty.20: Initialization of sled servo failed. It is not placed in the initial

position.23: Sled servo operation error.24: Made a request to move the sled servo to wrong position.30: Tracking balance adjustment error.31: Tracking gain adjustment error.33: Focus bias adjustment error.34: Focus gain adjustment error.35: Equalizer adjustment error.40: Focus servo does not operate.41: With a DVD dual layer disc, focus jump failed.50: CLV (spindle) servo does not operate.51: Spindle does not stop.60: Made a request to seek nonexistent address.61: Seek error of retry more than regulated times.70: Control data could not be read.80: Disc reading failed.

26

HCD-ZX10D

6. Version InformationOn the Test Mode Menu screen, selecting [6] displays the ROMversion and region code.The parenthesized hexadecimal number in version field is checksumvalue of ROM.

## Version Information ##

IF con. Ver.x. xxx

SYScon. Ver.x. xx (xxxx) Model LBT-ZX10D Region 0x Config xxxxxxxx

Front End Ver.x.xx

Exit: RETURN

IF con. : The version of master controller (IC401).SYScon. : The version of DVD system processor (IC207).Front End : The version of mechanism controller (IC901).

7. Video Level AdjustmentOn the Test Mode Menu screen, selecting [7] displays color bars forvideo level adjustment. During display of color bars, OSD disappearsbut the menu screen will be restored if pressing the [RETURN] key.

27

HCD-ZX10DSECTION 5

MECHANICAL ADJUSTMENTSSECTION 6

ELECTRICAL ADJUSTMENTS

0 dB=0.775 VDECK SECTION

1. Demagnetize the record/playback head with a headdemagnetizer.

2. Do not use a magnetized screwdriver for the adjustments.3. After the adjustments, apply suitable locking compound to the

parts adjust.4. The adjustments should be performed with the rated power

supply voltage unless otherwise noted.5. The adjustments should be performed in the order given in this

service manual. (As a general rule, playback circuit adjustmentshould be completed before performing recording circuitadjustment.)

6. The adjustments should be performed for both L-CH and R-CH.

7. Switches and controls should be set as follows unless otherwisespecified.

• Test Tape

RECORD/PLAYBACK HEAD AZIMUTH ADJUST-MENT

DECK A DECK B

Note: Perform this adjustments for both decksProcedure:1. Mode: Playback

Tape Signal Used forP-4-A063 6.3 kHz, –10 dB Azimuth Adjustment

PRECAUTION1. Clean the following parts with a denatured alcohol-moistened

swab:record/playback heads pinch rollerserase head rubber beltscapstan idlers

2. Demagnetize the record/playback head with the a headdemagnetizer.

3. Do not use a magnetized screwdriver for the adjustments.4. After the adjustments, apply suitable locking compound to the

parts adjusted.5. The adjustments should be performed with the rated power

supply voltage unless otherwise noted.

TORQUE MEASUREMENT

3.06 N • m to 6.96 N • m31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.19 N • m to 0.58 N • m2 to 6 g • cm

(0.02 – 0.08 oz • inch)

3.06 N • m to 6.96 N • m31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.19 N • m to 0.58 N • m2 to 6 g • cm

(0.02 – 0.08 oz • inch)

6.96 N • m to 14.02 N • m71 to 143 g • cm

(0.98 – 1.99 oz • inch)

9.80 N • m100 g or more

(3.53 oz or more)

9.80 N • m100 g or more

(3.53 oz or more)

Mode Torque meter

CQ-102C

CQ-102C

CQ-102RC

CQ-102RC

CQ-201B

CQ-403A

CQ-403R

Meter reading

FWD

FWD

back tension

REV

REV

back tension

FF/REW

FWD tension

REV tensionset

MAIN boardIC101Pin wk (L-CH)Pin ej (R-CH)

MAIN boardIC101Pin eh (GND)

+–

level meter

test tapeP-4-A063(6.3 kHz, –10 dB)

28

HCD-ZX10D

Screwposition

L-CHpeak

within1dB

Outputlevel

L-CHpeak

R-CHpeak

within1dB

Screwposition

R-CHpeak

2. Turn the adjustment screw and check output peaks. If the peaksdo not match for L-CH and R-CH, turn the adjustment screwso that outputs match within 1dB of peak.

3. Mode: Playback

4. After the adjustments, apply suitable locking compound to thepats adjusted.

Adjustment Location: Playback Head (Deck A).Record/Playback/Erase Head (Deck B).

MAINboardIC101

test tapeP-4-A063(6.3 kHz, –10 dB)

pin ej

oscilloscope

L-CH

R-CH

V H

waveform of oscilloscope

in phase 45° 90° 135° 180°

good wrong

pin eh

pin wk

L

R

forward reverse

DVD SECTION

About the dicision to pass or fail of the optical pick-up block, referto “DICISION TO PASS OR FAIL OF THE OPTICAL PICK-UPBLOCK” (Refer to page 6 in SERVICING NOTES)

• Precaution1. DVD block is basically designed to operate without

adjustment. Therefore, check each item in order given.2. Use DVD reference disc unless othermise indicated.

[DVD reference disc]TDV-520CSO (DVD-SL) : PART No. J-2501-236-ALUV-P01 (CD) : PART No. 4-999-032-01TDV-540C (DVD-DL) : PART No. J-2501-235-A

Note: Do not use exiting test disc for DVD.3. Use an oscilloscope with more than 10MW impedance.4. Clean the object lens by an applicator with neutral detergent

when the signal level is low than specified value with thefollowing checks.

AUTO SERVO ADJUSTMENTAfter parts related to the servo circuit (RF amplifier (IC001), DSP(IC509), motor driver (IC501), EEPROM (IC903) so on) arereplaced, re-adjusting the servo circuit is necessary. Select “ALL”at “1. Drive Auto Adjustment” (Refer to page 19 in TEST MODE)and adjust DVD-SL (single layer), CD and DVD-DL (dual layer).

VIDEO LEVEL CHECKPurpose:This adjustment is made to satisfy the NTSC standard, and if notadjusted correctly, the brightness will be too large or small.

VIDEO boardVIDEO OUT jack (J1201)

75 Ω

Oscilloscope

set

Procedure:1. Connect an oscilloscope to VIDOE OUT jack (J1201) on the

VIDEO board.2. Load a DVD reference disc playback.3. Check the video signal level is 1.00 ± 0.05 Vp-p.

1.00 ± 0.05 Vp-p

(WHITE 100%)

HCD-ZX10D

2929HCD-ZX10D

SECTION 7DIAGRAMS

7-1. BLOCK DIAGRAM – RF SERVO SECTION –

DETECTOR

1

63 61

DVDRFP

RFSIN

B

ATON

62ATOP

CD/DVD RF AMP,FOCUS/TRACKING ERROR AMP

IC001OPTICAL TRAVERSE

UNIT(DBU-3)

2AXISDEVICEFOCUS/

TRACKINGCOIL

LASERDIODE

(FOR CD)

FOCUS/TRACKING COIL DRIVER,SPINDLE/SLED MOTOR DRIVER

IC501

MSPINDLE

AMPIC503

CD DECODER,DIGITAL SERVO PROCESSOR

IC509

FFFR

RF

FCS+

D C B A

TE

• SIGNAL PATH

: AUDIO

: VIDEO

: CD PLAY

: DVD PLAY

60 AIN

59 AIP

52FNN

53FNP 57RFAC

55 DIN

54 DIP

23 DVDPD

3 A24 B25 C26 D2

18 CD_E17 CD_F

12 AA

11 BD

10 CC

9 D

B16 CD_A

A15 CD_B

D14 CD_C

C13 CD_D

22 CDLD

24 CDPD

ABCD

FE

CD LD

INLIM

PD

DVD LD

MMSLED

36FCS–

37

TRK+

SLEDA+SLEDA–SLEDB+SLEDB–

SPDL+

SPDL–

34TRK–

35

481

34

32313029

2728

4746

MUTE_2D60

SLED_A43

SLED_B44

SFDR29

SSTP26

FG62

FCS_JMP_28FCS_JMP_17

SP_ON63TDS-M73

MECHANISM CONTROLLERIC901 (1/2)

LDSE

L

76

EXCKSCOR

109

APE0

SDCL

K_RF

82

SDAT

A_RF

83

AVC(1.65V)

SRDR30

MIRR

MIRR

DATA

RF

CLKR

F

SDEN

2

SDEN

TE

65

TE

FE

67

FE

PI

66

PI/C

E

LDON

28

INLI

M

31

92

MNT

1

WEOERAS

DVD DECODERIC701

16MbitD-RAMIC706

HDB0

– H

DB7

MDB

0 –

MDB

9,M

DBA

– M

DBF

I/O0

– I/O

15A0

– A

9

SCOR

BUFFERIC703 (2/2)

COMPARATORIC703 (1/2)

CLOCKGENERATOR

IC906

66 –

69,

71,

73

– 75

, 96,

97,

99, 1

01, 1

02, 1

04 –

106

2 –

5, 7

– 1

0,41

– 4

4, 4

6 –

49

44, 4

1, 3

9, 3

5,32

, 30,

27,

24

21 –

24,

27 –

32

MA0

– M

A9

79, 8

0, 8

2 –

87,

89, 9

1

LCAS

TFTR FF

FR

FRFF

7 8

XTI

XTO

D0 –

D7

D0 –

D7

10

SO2

13 3

SO3

MO1

X90227MHz

14 –

21

172

– 17

6, 1

, 2, 4

A0 –

A7

A0 –

A7

89 –

96

5, 7

, 9 –

14

SD0 – SD7A

C

SDEF, XSAK,XDCK, XSRQ

BXSAKSDEF

EEPROMIC903

AUTOMATIC POWERCONTROL (FOR CD)

Q002

LASERDIODE

(FOR DVD)21 DVDLD

SW

VC38CE42

MIRR29FOK_CD74SCLK_CD72COUT_CD30

TE41

RFAC50

FE FE39PI/CE RFDC43

SE40

FFDR33FRDR34

TFTFDR31

TRTRDR32

AUTOMATIC POWERCONTROL (FOR DVD)

Q001

LASER DIODESELECT SWITCH

Q901

FOCUS COILDRIVE

TRACKING COILDRIVE

SLED MOTORDRIVE

SLED MOTORDRIVE

SPINDLE MOTORDRIVE

BUFFER

19MUTE1220MUTE3421MUTE522TSD-M

DSAVE9739POWER SAVE

45

10

7

26LDON

27MIRR

PI/CE38PI

FE40FE

TE39TE

SDEN48SDEN

CLK RF46SCLK

DATA RF47SDATA

31MIN

36V125

32MEVO

20VC VC

61SLED

8SCLK

MUTE_CD593MUTE

19COUT

22FOK20MIRR

GFS_CD71LOCK_CD7524LOCK

13GFS

SQCK5477SQCK

DOCTRL/ISBTEST363MD2

CDSP21069XTSL

XDRST982XRST

71XTAI

80EXCK

25MDP

LAT_CD275XLATCLOK_CD506CLOKDATA_CD494DATA

SQSO52SENS_CD97SENS

76SQSO

SCOR2615SCOR

5SDA_EEP

6MNT1

64JIT

25XRST_1882

45SCK_DSD

SDA5100SCL_EEP SCL699WP_EEP WP7

XRST164

12XCS_DVD XCS1984XWR XWR1885XRD XRD17

SPO135MDIN2137

XTL1170

SCOR150

EXCKEXCK147

SBSOSBIN148

WFCKWFCK151

GSCORGSCOR146

C2POC2PO155

LRCKLRCK163

BCKBCLK158

MDAT160

RFIN117

XTL2169XTAL167

58GFS_DVD GFS107

23INT1_DVD XINT12122INT0_DVD XINT020

SBSO79SBSO

WFCK10WFCK

DFCT DFCTDFCT145

GSCOR

11DFCT17WDCK

C2PO14C2PO

LRCK65LRCK

BCK67BCK

66PCMD

26HDB846HDRQ

XDCKXSRQ

48XHWR53XHAC

95XCAS35

UCAS3478XRAS 1894XOE 3376XMWR 17

27M

13

40 41

XTAL

EXTA

L

X90120MHz

COMPARATORIC003

8

(Page 30)

(Page 30)

(Page 30)

HCD-ZX10D

3030HCD-ZX10D

7-2. BLOCK DIAGRAM – VIDEO/CHANGER SECTION –

VIDEO OUTJ1201

S VIDEO OUTJ1202

• SIGNAL PATH

: Y

: CHROMA

: COMPONENT VIDEO

DVD SYSTEM PROCESSORIC207

131VDAC_0

150DATA0 (DM)

151DATA1 (FLR)

182 SDERROR183 SDCLK179 SDEN

192 INT/EXT178 SDREQ

139 XIN

110 MREQ

SDDA

TA0

– SD

DATA

7

177

–174

, 171

–16

8

SD0 – SD7A

27MC

SDEF, XSAK,XDCK, XSRQ

B

ADC_DATA, BCK, LRCK, XCK

D

128VDAC_1

125VDAC_2

VIDEO SWITCH, 75Ω DRIVERIC1200

2

SW1

EEPROMIC204

MECHANISM CONTROLLERIC901 (2/2)

5 DI6 DO

3

CS

4 SK

J1200

SWITCHINGIC902

SWITCHINGIC904

CE WEOE

ADDRESS LATCHIC231 – 233

PROGRAM ROMIC205

57 – 60, 64 – 71, 75 – 78,81 – 84, 88 – 95, 99 – 102

25 – 27,60 – 66, 24, 21

HA1 – HA3HAD0 – HAD15

DATA & ADDRESS BUS

DATA & ADDRESS BUSAD

DRES

S BU

SHA

4 –

HA22

22, 19 – 14, 11 – 3 2, 207, 206

HAD0 – HAD15 HA1 – HA3

HAD0 – HAD15 HA1 – HA2

HAD0 – HAD15 HA1 – HA3

26CE W

E

28

OE

11

A3 – A21

195

HCS0

WEH

.UDS

27

HREA

D

25

A0 – A2

25 – 23

DQ0 – DQ15

29 – 36, 38 – 45 22 – 18, 8 – 1,48,17, 16, 9, 10, 13

WE

128Mbit SD-RAMIC203

DQ0 – DQ31A0 – A9,

A10/AP, NC

MD0 – MD31

CS WE

RAS

52

MCA

S

18

CAS

51

MRA

S

19

53

MW

E

17

49

MCS

0

20

56

MCL

K

68

CLK

47

BA1

23

BS1

48

BA0

190

ALE

191RS

T_SP

C162

CS (Z

IVA_

E2P)

165

WRI

TE_C

TRL

(ZIV

A_E2

P)

116

HIRQ

2

22

BS0

37

DRVR

DY

38

RST

32

CS_Z

IVA

81

188

DRVR

DY

36

DRVI

RQ

184

HIRQ

1

35

SCK_

ZIVA

185

DRVC

LK

33

SI_Z

IVA

187

DRVR

X

34

SO_Z

IVA

186

DRVT

X

79

I2C_

SCL

160

I2C_

CL

78

I2C_

SIO

161

I2C_

DA

OECE

COMPONENTVIDEO OUT

Y

PB/CB

PR/CR

122VDAC_3

119VDAC_4

VIDEO AMP, 75Ω DRIVERIC1201

4 CVBSIN

D/A CONVERTERIC302

1 VIN1

3 VIN2

2 CIN

6 YIN

10 CYIN

12 CBIN

14 CRIN

23CVBSOUT

20VOUT8

16VOUT7

7VOUT

26C OUT

21YOUT

20CYOUT

18CBOUT

16CROUT

27S-DCOUT

3

MUT

E1

13

MUT

E2

25

S1

9

I/P

107

VS

108

I/P S

W

MDQM0 – MDQM3

DQM0 – DQM3

62, 73, 86, 97

16, 71, 28, 59

MA0 – MA11

42 – 33, 45, 46

BUFFERQ202

WC

R/B

DISC INDETECT SENSOR

PH101

2,4,5,7,8,10,11,13,74,76,77,79,82,83,85,31,33,34,36,37,39,40,

42,45,47,48,50,51,53,54,56

38MREQ

202 RESET37SYS RST

36VMUTE35VMUTE2

D+3.3V

70VIDEO OUT

LOADING MOTOR DRIVEIC515

M001(LOADING)

7FIN 50 LOD-POS4 OUT12 OUT2 9FIN 49 LOD-NEG

TABLE MOTOR DRIVEIC514

M002(TABLE)

7FIN 48 TBL-POS4 OUT12 OUT2 9FIN 47 TBL-NEG

43 DSENSLEVEL SHIFTQ870

TABLE SENSORPH102 42 TSENS

S002ROTARY ENCODER

45 CHK-SW

46 OC-SW2

44 OC-SW1

M

M

MASTER CONTROLLERIC401 (1/5)

DML, DMR, FL, FR, SL, SR, C, SWF

154DATA (SLR)

155DATA (CSW)

147XCK149BCK148LRCK

LRCK

113MDI114MC115ML

: VIDEO

: AUDIO

: GAME INPUT (VIDEO)

8 8

SD1SD2SD3

SD0

SD5SD6SD7

SD4LATCHIC256

XDCKXSAK

XSRQ

SDEF

BCK

BCK

LRCK

XCK

ADC_DATA

I2C DATA, I2C CLKE I2C CLK

I2C DATA

LATCHIC258

D3V

LATCHIC259

Q201

LRCK

CHUCKING DETECT,TRAY OPEN/CLOSE DETECT

S001(TRAY OPEN/CLOSE DETECT)

OPEN

CLOSE

J850 (1/2)GAME INPUT

VIDEO

C Y

INTERLACE/PROGRESSIVESELECT SWITCH

Q1200

SWITCHIC111

31 DATA4

BCK

XCK

45 DATA1

46 DATA2

47 DATA3

38 SCKI40 BCK41 LRCK

34 MDI35 MC36 ML

DML

DMR

14VOUT1FL

13VOUT2FR

12VOUT3SL

11VOUT4SR

10VOUT5C

9VOUT6SW

(Page 29)

(Page 29)

(Page 32)

(Page 29)

(Page 34)

(Page 32)

HCD-ZX10D

3131HCD-ZX10D

7-3. BLOCK DIAGRAM – TUNER/TAPE SECTION –

T101BIAS OSC

BIAS OSCQ101

REC BIASSWITCH

Q104, 105+9V

R-CH

TUNER UNIT

AM

FM ANT

AM ANT

ST-LST-R

ST-DOUT/MC-DIN

TUNEDSTEREO

ST-MUTE

ST-DIN/MC-DOUTST-CLK

ST-CE

FM75Ω(COAXIAL)

ANTENNA

HRPE101(REC/PB/ERASE)

(DECK-B)

HP101(PB)

(DECK-A)

L-CH

L-CH

R-CH

R-CH

R-CH

R-CH

ERASE

R-CH

MUTINGQ103

MUTING CONTROLSWITCH

Q106, 107

R-CH

MUTINGQ112, 114

R-CH

MUTING CONTROLSWITCH

Q108 – 110

MUTING CONTROLSWITCH

Q539, 540

MUTINGQ116

75

76

17 15EQ

78

111098

79 80

DECK A/B SELECT SWITCH,REC/PB EQ AMP

IC101 (1/2)

AMS

AMS DETECTQ190, 198, 199

AMS MUTINGQ528 –530

CAPM+M

TAPE MECHANISMDECK BLOCK

APLAY

ATRGM+

BPLAYAHALFBHALFASHUTBSHUT

REC (FWD)REC (REV)

(DECK-A)

BTRGM+

(DECK-B)

(CAPSTAN/REEL)

85 ST-CE82 ST-CLK84 ST-DOUT83 ST-DIN

86 TUNED87 STEREO

61 AMS-IN

63 TC-MUTE

39 AMS MUTE

51 A-PLAY

59 TC-RELAY

32 REC MUTE

60 BIAS

56 B-PLAY53 A-HALF91 B-HALF89 A-SHUT90 B-SHUT55 REC-A58 REC-B

52 A-TRG

57 B-TRG

54 CPM-CNT2

88 ST-MUTE

GST-L

JREC-L

HPB-L

MUTINGQ180

R-CH

MUTING CONTROLSWITCH

Q537, 538

TRIGGER PLUNGERDRIVE (DECK-A)

Q191, 192

TRIGGER PLUNGERDRIVE (DECK-B)

Q195, 196

CAPSTAN/REELMOTOR DRIVE

Q193, 194

MASTER CONTROLLERIC401 (2/5)

• SIGNAL PATH

: TAPE PLAY (DECK-B)

: REC

: TAPE PLAY (DECK-A)

: TUNER (FM/AM)

• R-ch is omitted due to same as L-ch.

(Page 32)

(Page 32)

(Page 32)

HCD-ZX10D

3232HCD-ZX10D

7-4. BLOCK DIAGRAM – AUDIO SECTION –

32

FDML, DMR, FL, FR,SL, SR, C, SW

MUTINGQ205

MUTINGQ206

MUTINGQ207

MUTINGQ208

HPB-L

DMR

FL

FR

DML

SR

C

SW

SL

MUTINGQ209

MUTINGQ210

MUTINGQ211

MUTINGQ212

37

40

41

2

6

33

34

5

10 9 8

7

4

2314 24 22

39

38

R-CH

R-CH

+

15

AUTO GAINCONTROL

R-CH 27

33130

51

GST-L

R-CH

J701 (1/2)

R-CH

VIDEO/SATIN

L

R

PHONO INL

R

PHONO AMPIC519

43

J801MIC 1

J802MIC 2

MIC AMPIC850 (1/2)

MIC AMPIC850 (1/2)

RV801MIC LEVEL

+

DIGITAL ECHOIC851

RV802ECHO LEVEL

J850 (2/2)

R-CH

GAME INPUTAUDIO

L

R

SELE

CTOR

TONE

2 23 24 28+

6

59 56 53

13 14

+R-CH +R-CH

BASSBOOST

31 30 29

272625

MUTING CONTROLSWITCH

Q535, 536

41 CD-A-MUTE

95 MIC DET

AUDI

O2-D

ATA

I/F

17

67

AUDI

O2-C

LK

18

68

AUDI

O1-D

ATA

65

AUDI

O1-C

LK

ANALOG_IN_MUTE

66

FEED BACKSWITCH

Q200

R-CH

28FEED BACK

SWITCHQ201

MUTINGQ290

FEED BACKSWITCH

Q145

R-CH

I/FMCU

3435

69

LINE MUTE 34

SW MUTE 31

MUTING CONTROLSWITCH

Q292, 293

MUTINGQ523, 524

MUTING CONTROLSWITCH

Q533, 534

MUTINGQ203

MUTINGQ204

MUTINGQ202

MUTINGQ270

MUTING CONTROLSWITCH

Q532

A+9V

MUTING CONTROLSWITCH

Q531

J202SUBWOFFER OUT

R-CH

FL, FR, RL, RR, CM

SPEANAL

REC-LJ

FEED BACKK

ADC_DATA, BCK,LRCK, XCK D

FL

FR

RL

RR

C

29

26

25

13

11

12

ADC_DATA

A/D CONVERTERIC352

VINL

R-CH

BCKLRCK

XCK

1

VINR5

15DOUT14BCK13LRCK16SYSCLK

J701 (2/2)

R-CH

VIDEO/SAT OUT

L

R

MASTER CONTROLLERIC401 (3/5)

INPUT SELECT SWITCH,TONE CONTROL,ELECTRICAL VOLUME, BASS BOOST AMP

IC101 (2/2)

ELECTRICAL VOLUMEIC501

• SIGNAL PATH

: REC

: VIDEO/SAT OUT

: VIDEO/SAT IN

: PHONO IN

: MIC INPUT

: GAME INPUT (AUDIO)

: TAPE PLAY

: TUNER (FM/AM)

: AUDIO

• R-ch is omitted due to same as L-ch.

(Page 31)

(Page 31)

(Page 30)

(Page 31)

(Page 30)

(Page 33)

(Page 34)

(Page 33)

HCD-ZX10D

3333HCD-ZX10D

7-5. BLOCK DIAGRAM – AMP SECTION –

MFL, FR, RL, RR, C

KFEED BACK

FR

FL

SL

SR

C

POWER AMPIC600

18 11

14 8

12

POWER AMPIC701

18 11

14 8

19 21

12

STANDBYSWITCH

Q604, 606, 610

STANDBYSWITCH

Q720 – 722

+

+

+

+

DC DET 2

1

4

3 OVERLOAD

OVER CURRENT PROTECTORIC627

OVER LOADDETECT

Q618, 668

OVER LOADDETECT

Q730, 780

OVER LOADDETECT

Q770

THERMALDETECT

Q628, 630

FAN MOTORSWITCH

Q629

TH630

D624

MUTINGQ640, 641

MUTING CONTROLSWITCH

Q634, 635

D627

D760

RY646 RELAY DRIVEQ644

PROTECTSWITCH

Q647

OVER LOADDETECT

Q648

–1

–2

RY760 RELAY DRIVEQ762

PROTECTSWITCH

Q765

RY761 RELAY DRIVEQ763

PROTECTSWITCH

Q764

–1

–2

J851PHONES

TM608 (1/2)

+––+

L

R

+––+

+–

D654

D655

AC CUT DETECTN

FAN MOTOR DRIVEQ553, 555, 557

M501(FAN)

M

FRONT

TM608 (2/2)

L

R

SURR

CENTER

MASTER CONTROLLERIC401 (4/5)PR

OTEC

T

81

STK

MUT

E

80

C-RE

LAY

71

REAR

REL

AY

72

FR R

ELAY

78

AC C

UT M

AIN

33

HP D

ET

77

HP M

UTE

79

• SIGNAL PATH

: AUDIO

AC CUTDETECT

Q402

Iranian,Singapore,Malaysia

(Page 32)

(Page 32)

(Page 34)

HCD-ZX10D

3434HCD-ZX10D

7-6. BLOCK DIAGRAM – PANEL/POWER SUPPLY SECTION –

(AC IN)

(Mexican, Australian)

(Iranian, Singapore, Malaysia)

VOLTAGESELECTOR

S1000

VOLTAGEDETECTIC402

RESETSWITCH

Q401

VFVF

VLVL

VP

STBY LED 76D920

(STANDBY)

SIRCSREMOTE CONTROL

RECEIVERIC902

4

15

X40216MHz

X-IN

13

X-OU

T

10

X40132.768kHz

XC-IN

11

XC-O

UT

83

X6014MHz

XIN

82

XOUT

POWER ON/OFFRELAY DRIVE

Q1000

SWITCHINGPOWER

D1192–33VREGULATOR

Q664

F1161

F1171

RECTD658

+VL–VL

VHVH

F1141

F1151

RECTD656

+VH–VH

AC4AC4

F1191RECTD502

AC3AC3

F1181RECTD501

VF1VF2

VP(–33V)

D661

D660

TO FLUORESCENTINDICATOR TUBE

FL901

+5VREGULATOR

IC513

+12VREGULATOR

IC516

+9VREGULATOR

IC510

+9VREGULATOR

IC511

AUDIO+5V,ZIVA+5V

B+ SWITCHQ552, 554

+5VREGULATOR

IC517D+5V

M+9V,LED+9V

M+12V

+4.5V

A+3.3V-2

A+9V

+3.3VREGULATOR

IC518

+4.5VREGULATOR

Q563

+3.3VREGULATOR

IC907

A+3.3V-1+3.3V

REGULATORIC502

D+1.8V+1.8V

REGULATORIC211

DAC+3.3V+3.3V

REGULATORIC392

D+3.3V

CD/DVD POWERON/OFF SWITCH

Q506, 509

OVER VOLTAGEDETECT

Q590

FAN VCC

D329

40CD-POWER/DVD POWER

94I-HOLD

20AC-CUT

28STBY RELAY

12RESET

EVER+4V

D406

LED DRIVEQ90074 POWER-KEY

S929I / 1

73 DISPLAY-KEY

2961 IIC-CLK

S928DISPLAY

I2C-CLK3060 IIC-DATA

97 BPM-DET-LO

I2C-DAT

59LED SELECT

7577 GC RESETRESET

I2C DATA, I2C CLKE

SPEANAL

I2C CLKI2C DATA

ROTARYENCODER

S975

VOL A80VOL B79

VOLUME

ROTARYENCODER

S957

JOG A75JOG B76

JOG

FL901FLUORESCENT

INDICATOR TUBE

G1 –

G13

, G15

,G1

6, G

18, G

19

4 –

1, 1

00 –

92,

90, 8

9, 8

7 86

S1EG

1 –

SEG3

6

5 –

10, 1

2– 2

2,24

– 4

1, 4

391

, 88

G14,

G17

GRID DRIVEQ901, 902

KEY

0 –

KEY

5

S900 – 927, S931 – 945,S947 – 956, S958 – 967, S970

(FRONT PANEL KEY) 64 –

69

MASTER CONTROLLERIC401 (5/5)

44 –

47,

52

– 58

TAPE A LED,SPK MODE LED,

CD LED,GAME, REC LED,

VOL 1, 2,VOL 3, 4,VOL 5, 6,VOL 7, 8,

VOL 9, 10,VOL 11, TUNER BAND,

TAPE B LED

D906 –919,D921 – 924,D926, 929

LED DRIVEQ907 – 917

LED POWERSELECT SWITCH

Q903

LED POWERSELECT SWITCH

Q905

B+ SWITCHQ909

B+ SWITCHQ906

VH+9V

VL+9V LED+9V

DISPLAY CONTROLLERIC901

IN11

IN22

BPF2IN14BPF2IN25

3BUF1OUT15BPF2OUT

14BPF3OUT

13BPF4OUT

16BPF1OUT

17RECOUT

74ALL BAND

BPF1IN1BPF1IN2

1918

20BUF2OUT

BPF3IN16BPF3IN27BPF4IN18BPF4IN29

REC

73BPF4-F04BPF4

72BPF3-F03BPF3

71BPF2-F02BPF2

70BPF1-F01BPF1

REC

BPF4

BPF3

BPF2

BPF1

BAND-PASS FILTERIC903

AC CUT DETECTN

RY1000

T1100POWER

TRANSFORMER

(Page 32)

(Page 30)

(Page 33)

(Iranian, Singapore, Malaysia)

Ver. 1.1

HCD-ZX10D

3535HCD-ZX10D

• Circuit Boards Location• Note for Printed Wiring Boards and Schematic Diagrams

Note on Printed Wiring Board:• X : parts extracted from the component side.• Y : parts extracted from the conductor side.• f : internal component.• : Pattern from the side which enables seeing.

(The other layers' patterns are not indicated.)

C

B

These are omitted.

E

Q

B

These are omitted.

C E

Q

Note on Schematic Diagram.• All capacitors are in µF unless otherwise noted. (p: pF)

50 WV or less are not indicated except for electrolytics andtantalums.

• All resistors are in Ω and 1/4 W or less unless otherwise

specified.• f : internal component.• 2 : nonflammable resistor.• 5 : fusible resistor.• C : panel designation.

• A : B+ Line.• B : B– Line.• Voltages and waveforms are dc with respect to ground un-

der no-signal (detuned) conditions.– RF/DMB07/VIDEO Boards –

no mark : DVD PLAY

* : Impossible to measure– Other Boards –

no mark : TUNER (FM/AM)( ) : DVD PLAY⟨⟨ ⟩⟩ : TAPE PLAY (DECK-A) : TAPE PLAY (DECK-B)[ ] : REC

* : Impossible to measure• Voltages are taken with a VOM (Input impedance 10 MΩ).

Voltage variations may be noted due to normal productiontolerances.

• Waveforms are taken with a oscilloscope.Voltage variations may be noted due to normal productiontolerances.

• Circled numbers refer to waveforms.• Signal path.F : AUDIOL : VIDEOE : Ya : CHROMAr : COMPONENT VIDEOJ : CD PLAYc : DVD PLAYf : TUNER (FM/AM)j : TAPE PLAY (DECK-A)d : TAPE PLAY (DECK-B)G : RECh : TV/SAT OUTk : TV/SAT INq : PHONO INN : MIC INPUTg : GAME INPUT (AUDIO)p : GAME INPUT (VIDEO)

• AbbreviationAUS : Australian modelE15 : Iranian modelMX : Mexican modelMY : Malaysia modelSP : Singapore model

Caution:Pattern face side: Parts on the pattern face side seen from(Conductor Side) the pattern face are indicated.Parts face side: Parts on the parts face side seen from(Component Side) the parts face are indicated.

Note: The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

• DMB07 board is multi-layer printed board.However, the patterns of intermediate-layer have not beenincluded in diagram.

• Indication of transistor.

VOLTAGE SELECTOR board

VIDEO board

MAIN board

DMB07 board

POWER board

SURROUND board

TRANS board

SENSOR board

SWITCHING POWER

TUNER UNIT

CURSOR board

FUNCTION SW board

RF board

TC-B board

SE-130 board

MD-94 board

GAME/HP board

CD-R board

JOG board

CD-L board

VOL board

MIC board

TC-A board

POWER SW board

PANEL board

Ver. 1.1

HCD-ZX10D

3636HCD-ZX10D

7-7. PRINTED WIRING BOARD – RF BOARD – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

C023

C028

C040

C037

R004

R005

C038C022

C020

R016

R003

R018

R014R012

C027

C041

C010

Q002

Q001

R007

C039R001

C021C013

R009R008

C008

C017

C015

C011

C009

R021

CN003

CN001

CN002

C049 IC003R033

R034R047R046

C050

C052

R091

R024

R025

R023 C029

C026

R026

C024R027

R017R015

C042

R013

R019

L002

L001

C003

D002

D001

R022

R020

C031

R011

C006

C005

C034

R006

R028R029

C036

C032

C035

C033

C004

C012

C025 R0

10C002

C030

C018C016

C014

C019

R035

C001

R041

R031

C051

IC001

1

3

5

4

(COMPONENT SIDE)RF BOARD

1-684-822-

12

(12) 1-684-822-

12

(12)

(CONDUCTOR SIDE)RF BOARD

B

EC

B

EC

ADMB07 BOARD

CN501(Page 38)

OPTICALTRAVERSE

UNIT(DBU-3)

1 2 3 4 5 6 7 8 9 10 11 12 13

A

B

C

D

E

F

1

16

48

33

17 32

64 49

D001 C-10D002 B-10

IC001 D-11IC003 D-3

Q001 B-3Q002 B-3

• SemiconductorLocation

Ref. No. Location

HCD-ZX10D

3737HCD-ZX10D

7-8. SCHEMATIC DIAGRAM – RF BOARD – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams.

JL005

C011

C039

C038

C040

JL007

C003 R010R008R007

IOP1

C004

R006C001

C010

R004R003

IOP2

C002

R022

R025

R023

C016

C015

C014

R014

R013

R012

R011

R018

R017

R016

R015

C042

C020

C021

C022

C023

R024

R026C027C028

C029

C018

C024

C033 C012 C005

R029

R028

R027

JL002

JL001

C032

C034

C049

C009

C035

CN003

CN001

CN002

C025

C006 C013

R005 R009

R035

R019 R020

C041

R001

Q001 Q002

C008

R041

JL004

C030

C019

C017

IC001

JL003

JL006

R031

C037

R021

C052

C051

C050

R034

C036R033

R047

R046

IC003

R091

C031

C026

D001 D002

1000p

0.0

33

0.0

33

0.1

1006.3V 4703333

1016V

4701006.3V

1000p

L00147µH

L00247µH

3333

1016V

220

100

820

2200p

2200p

2200p

0

0

0

0

0

0

0

0

180p

22p

22p

22p

22p

0

12k0.10.1

0.01

5600p

0.01

0.1 0.1 2210V

0

0

0

0.047

0.1

0.1

0.1

0.1

9P

24P

29P

0.1

2210V 0.1

47k 47k

0

0 0

0.1

100

2SB1132-T100-QR 2SB1132-T100-QR

0.1

1k

0.01

5600p

2200p

SP3723CAF0PM 100

680p

0

0.1

0.4

7

3300p

470

0.47100k

33k

10k

TL343IDBVR

560k

1000p

0.1

1SS355TE 1SS355TE

MIRR

CD_LD

DVD_LD

SDEN

DATA_RF

CLK_RF

SDEN

DATA_RF

CLK_RF

LDONA

B

E

F

TE

FE

TE

FE

PD

RFMON

RFMON

F

D

C

RFP

E

CD_LD

DVD_LD

PD FD-

FD+

TD-

TD+

FD+

FD-

TD+

TD-

SLB-

SLB+

SLA-

SLA+

PI/CE

PI/CE

LD

ON

MIR

R

SLA+

SLB+

SLB-

SLA-

RFP

D

C

A

BB

A

F

RF

GND

VC

VCC

C

D

E

PD

VR

SW

LD GND

DVD LD

CD LD

N.C

FCS+

FCS-

TRK+

TRK-

AGND

RFAC

AGND

AVC

AVC

MIRR

TE

FE

A5V

A5V

SDEN

DATA_RF

CLK_RF

LDON

A3V

RFMON

INLIM

LDSEL

VCC

SPDL+

SPDL-

SLEDA+

SLEDA-

SLEDB+

SLEDB-

TD+

TD-

FD+

FD-

SLEDA+

SLEDB+

SLEDA-

SLEDB-

LED

GND

INLIM

SPDL-

SPDL+

INLIM

INLIM_3V

LIMIT-SW(A)

LIMIT-SW(B)

LIMIT-SW(B)

PI

FOCUS/TRACKING ERROR AMP

AUTOMATIC POWER

CONTROL

(FOR DVD)

AUTOMATIC POWER

CONTROL

(FOR CD)

VCC

VEE

COMPARATOR

CD/DVD RF AMP,

(Page 40)

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

HCD-ZX10D

3838HCD-ZX10D

7-9. PRINTED WIRING BOARD – DMB07 BOARD (Component Side) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

FL703

CN101

R718

R769

C717

R767

C777

C778 C779

C780

R975

CN901

FL702

R908

C733

R765

R764

R763

R762

C702

C705

IC906IC904

IC90

2

C706

C708

C711

FL204

C712

R927

R931

C917C916

C915C914

C907

C715

C716

C533

C556C561

R751

JW801

C588

X902

C771

C773

C774

C701

FL701

IC701

C259

C258

R601

R788

R707R708

R217

R916

R219

R709

R710

R984

IC232IC231

R284

R283

R277

R276

R275

R274

R273

R269

R917

R15

R505

R267R266R265R264

R14

R988

R254

R13

R994R995

R997R998

R571

R711

R234

R712

R231

R230

C781

R552

R548

C213

C215

C325

C321

C306

R714

C305

C304

C303

C302

D1303

D1304

R130

2

C1302

R978

R716

IC207

FL20

5

D202

CN105

R717

R719

FL206

C502R964

R907

R906

R905

C552

C201

C517

C518

R921

R922

R923

C522

JW806

L501

R928 R929

JW805

JW802JW804

JW803

C526

C528C101

C151

JW392

C531

C534

C535

C543

C544

C545

C548 C551

IC211

C558

C559

C560 C563

C553

C565

C567

C568

C573

C590

FL101

C901

C902

C924

C903

C904

C905

C926 C927

R962

R958

C592

R747

FB105 C202

R748

CN501

D901

FL501

FL502

FL901

IC503

IC509

IC901

L103

R760

R504

C266

C265

R805

C263

R506

R510

R511

R523

C261

R599

R593

C253

C252

R588

R586

R584

R314

C925

C394

C393C392

C248

R940

R942

R572

R943

R568

R567

C246

R566

R565

R564R563

R562

IC302

CN102

R561

R560

R559

R558

FL303

FL302

C245

C242

C241

C239

CN107

R970

C227

R551R550

C214

R545

R536

R938

R936

C547

R213

C283

C279

C278

C277

C291

R299

R263

R268

X901

FL352

C366C352

C355

C356 C357

C364

C532

C530

C569R758

R629

R215 R250

R226

R225

R296

IC259

IC258

IC256

C287

R998

5R9

984

R998

3 R998

2

R327 R197

R198

Q201

R202

110

2011

110

2011

1 44

132

133

176

88

45

89

1

1

1

8

16

9

4

8 53

54

1 52

156 105

104157

53208

1

(FOR CHECK)

7

1

1

3

2

20

21

40

80

61

6041

1716

1

25

76

76 100

50 26

51

1

4

8

5

1

12

36

25

12 24

58 37

12

(COMPONENT SIDE)DMB07 BOARD

1-861-848- 12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

A

B

C

D

E

F

G

H

I

J

EMAIN

BOARDCN503

(Page 51)

B MAIN BOARDCN508

(Page 51)A RF BOARD

CN002(Page 36)

D VIDEO BOARDCN1202

(Page 48)C MAIN BOARD

CN404(Page 51)

12

12

76

2120

E

1

1

10

1

10

20

11

11

10

2011

D202 F-9D901 H-4D1303 D-2D1304 D-2

IC207 D-13IC211 F-9IC231 I-14IC232 I-14IC256 D-11IC258 E-11IC259 C-11IC302 E-3IC503 G-8IC509 G-9IC701 H-12IC901 G-5IC902 F-12IC904 F-12IC906 F-11

Q201 B-11

• SemiconductorLocation

Ref. No. Location

HCD-ZX10D

3939HCD-ZX10D

7-10. PRINTED WIRING BOARD – DMB07 BOARD (Conductor Side) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

IC205

IC111

R369

R368

IC703

C727C767

C769

R789

C776

FL706

R799

R777

R776

R778

C703

R271

FL903

C709

FB903

FB902R932

R933

C713

C714

R301

C516

C524

C718

C720

C721

C722C723

C724

C725

C726

C728

C730

C740

C741

C742

C743

C744

C745

C752

C760 C761 C762 C763C764

C765

C766

C768

C770C772

C775

C782

C783

FL705

R785

R786

IC706

C734

R700

L704

C275

C264

C205

R787

R270

R222R221

R100

0

R220

C540

R282R281

R280 R279R278

R261

R260

R514R515

R259

R257

R255

R522

R253

R251

R527

R248

R247

R246

R245

R244

R990

R241

R240

R996

R12R1

1R1

0

R232

R227

C326

R713

Q202

C324

C323

C322

R534

R915

C309C308

C307

R918

R715

C274

IC204

FL203

R720

R721

R724

R725

C501

R726 R727

R974

R728

C928

R730

R731

R732

R733R734R735R736R737R738

R913

R912

R911

C508

R904

R902

R901

C509

C510

C511

C507

C512

C514

C515

C276

R741

R920

C519

R925R926R930

C506

C504

C503

C525

C527

IC203

C529

D392

R742

C570

R743

C589

C513

R744

R745

C906

C908

C909

C910

C913

C918

R746

IC907

C203

FL908

IC501

IC903

IC392

R750

Q901

D393

D394

R699

R698

R694

R503

C272

C271

C270

C269 C268C267

R935

C262

R512

R513

R516

R517

R519

R520

R521

R524

R525

C260

C257C256

C255

C254

R591

R589

R587

R581

R580

R313

R312

R311

R310

R579

R309

R308

R307R306

R573

C251

C250C249

C247

R305

R304

R303

R302

R9980

C244

C243

R9981C240

C238

C237 C236

C235

C234

C233

R9998R9999

C232

C231

C230

C229

C226

C220

C218 C216

C204

R537

R533

R530

R529

IC233

R272

R290

R292

R291 C290

C280

C281

C282

L901

C729

C527

R293

R294 R228R328

R555

R576R583

D500

C521IC502

C523

R392

C367C368

R362

R353

R352

IC352

C365

C363R335R329

1

3

2

1

3

2

E

14

85

13

64

112

3625

24

13

37

48

E

8

5

1

4

1

4

8

5

150

2526

4344

1

1

22

44

23

86

1

10

20

11

1-861-848- 12

(CONDUCTOR SIDE)DMB07 BOARD

1 2 3 4 5 6 7 8 9 10 11 12 13 14

A

B

C

D

E

F

G

H

I

J

1

3

2

1

12

24

13

D392 J-13D393 I-14D394 I-14D500 J-10

IC111 C-10IC203 D-2IC204 D-4IC205 G-2IC233 I-2IC352 C-13IC392 I-14IC501 H-8IC502 J-11IC703 G-6IC706 H-3IC903 G-10IC907 H-13

Q202 D-4Q901 H-11

• SemiconductorLocation

Ref. No. Location

HCD-ZX10D

4040HCD-ZX10D

7-11. SCHEMATIC DIAGRAM – DMB07 BOARD (1/8) – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams.

C522

C570

R698

R699

R573

C569

R694

FL502

C568C567C545 C543

C588

R537

R536

C501

R503

C502

R504

R506

R505

R561

R562

R558

C5

33

C5

31

C5

35

C589

C590

R548

R545

R559

R552

R551

R550

R563

R564

C544

R560

R599

R591

C516

C507

C511

C513

L501

C515

C540

R584

R588

R593

C551

FL501

C558 C556C561

C518

C517

CN501

C534

C553

C547

C560

C573

R567

C559

R5

65

R601

C5

63

R5

68

R572

C532

C548

R5

66

IC509

R571 C565

C552

R583

R576

D500

C523 C521

C592

C530

R629

IC503

0.1

10

0

0

10k

0.1

10k

100.0110 0.01

0.0022

68k

10k

0.01

47k

0.01

47k

47k

47k

1k

1k

47k

0.0

02

2

0.0

47

0.0

02

2

0.0022

0.0022

10k

10k

1k

1k

1k

1k

1k

1k

0.1

1k

1k

0

0.0022

10

220p

10

0

220p

10

33k

10k

100k

0.47

1004V 100.1

0.01

10

29P

0.022

0.0033

0.1

0.0015

100p

3.3k

0.1

1k

0

10

0p

1M

470k

10

0.01

10

k

CXD3068Q

IC502µPC2933T-E2

1M 0.1

0

0

0

1SS355TE

0.1 0.1

1016V

10

0

NJM12904V(TE2)

B1

B2

B3

B6

B8

B9

B10

B11

C2

C3

C4

C5

C7

C8

C9

C1

0

D1

D2

D3

D4

D5

C1

PI

TE

FE

FE

TE

RFAC

RFAC

MIRR

DATA_RF

WFC

K

GS

CO

R

XR

ST

_C

D

DA

TA

XL

AT

CL

OK

SE

NS

SC

LK

CO

UT

MIR

R

SC

OR

RF_AC

MDP

MU

TE

_C

D

C2

PO

LDON

FE

TE

SDEN

CLK_RF

SLEDA-

SLEDA+

SPDL+

SPDL-

PISLEDB+

SLEDB-

TFDR

TRDR

FFDR

FRDR

PI

INLIM

RFMON

SLEDCTRL

GFS

_C

D

LD

SE

L

FCS+

FCS-

TRK+

TRK-

WAVRB

CDSP2

LOCK

FOK

DFCT

MD2

SQCK

SQSO

BCLK

MDAT

LRCK

768FS

EXCK

SBSO

AGND

RFAC

AGND

AVC

AVC

MIRR

PI

TE

FE

A5V

A5V

SDEN

DATA_RF

CLK_RF

LDON

A3V

RFMON

INLIM

LDSEL

FD-

FD+

TD-

TD+

SLEDB-

SLEDB+

SLEDA-

SLEDA+

SPDL-

SPDL+

CD DECODER,

DIGITAL SERVO PROCESSOR

AMP

VDD

GND

OG

I

+3.3V REGULATOR

(1/8)

(Page 37)

(Page 42) (Page 43)

(Page 41)

Ver. 1.1

HCD-ZX10D

4141HCD-ZX10D

7-12. SCHEMATIC DIAGRAM – DMB07 BOARD (2/8) – • See page 79 for IC Pin Function Description.

R726

R745R746C763C764 C762 C761 C760

R735

R736

R737

R738

R734

R733

R742

R741

R743

R732

R731

R730 C740

C741

C742

C743

C744

C745

C724 C725C727 C726

C709

C711

R711R709

R715

C716

C722

C723

C730

C718

C717

R718

C752

R714

R727

R728 C728 C721C720

R724

R721

R748

C715R700

R720IC703(1/2)

C733C705 C703

C783 R789

R788

R786 R785R787

FL706

C706 C702

C779

C778

C780 C777

C734

FL703

C776 C772

C775

R762

R763C771

C773 R769

R767

R765

R764

R760

R758

C767C768C769 C770C765

R776

R750

R777

C766R799

R778

FL701

FL702

FL705

C774

C729

IC703(2/2)C782

R710

R751

R725

R708

C708

R719

R716

R744

R707

C714

C713

R713

C712

R712

R747

IC706

IC701

C701

R717

C781

100k

47k47k0.010.01 0.01 0.01 0.01

10k

10k

10k

10k

10k

10k

22

22

22

10k

22

22

0.01

0.01

0.01

0.01

0.01

0.01

0.01 0.0110 0.01

0.1

0.047

2.2k150k

10k

0.47

0.01

0.01

0.01

0.01

0.01

10k

0.1

10k

3.3k

10k 0.1 0.10.1

1k

33k

33k

0.00158.2k

1kNJM12904V(TE2)

100.01 0.1

0.0015 100k

100k

100k 10k100k

0.01 10

10

0.01

10 0.01

10

L70447µH

0.01 0.01

0.01

22k

8.2k0.047

0.47 2.2k

47k

22k

1M

0

0

0.010.010.01 0.010.01

0

10k

0

100p0

100k

0.0047

10

NJM12904V(TE2)0.0015

10k

0

1.8k

470k

0.01

1k

100

22

100

0.1

0.1

10k

100p

10k

33k

MSM51V18165F-60TSKR1

TMC57929PGF-RDP

1004V

100k

2204V

B1

B2

B3

B6

B8

B9

B10

B11

E1

E2

E3

SIGNAL_BUS

SD

7

SD

EF

SD

6

SD

5

SD

4

SD

3

SD

2

SD

1

SD

0

BD0

BD1

BD2

BD3

BD4

BD5

BD6

BD7

WE

RAS

MA0

MA1

MA2

MA3

MA

8

XM

OE

XC

AS

BD

8

BD

9

BD

A

BD

B

BD

C

BD

D

BD

E

BD

F

LRCK

BD

0

BD

1

BD

2

BD

3

BD

4

BD

5

BD

6

BD

7B

D8

BD

9

BD

A

BD

B

BD

C

BD

D

BD

E

BD

F

MA

0

MA

1

MA

2

MA

3M

A4

MA

5

MA

6

MA

7

MA

8

XC

AS

WE

XM

OE

RA

S

MA4

MA5

MA6

MA7

XSAK

XDCK

XSHD

D4

D3

D2

D1

D0

JIT

SPIN

DFCT

SCOR

GSCOR

EXCK

SBSO

WFCK

C2PO

BCLK

MDAT

MA

9

MA

9

MDP

MDIN

MDIN

JIT

OFF

XSRQ

RF_

AC

MNT1

GFS_DVD

XC

S1

88

2

XH

WR

XH

RD

A7

A6

A5

A4

A3

A2

A1

A0

D7

D6

D5

XIN

IT0

XIN

IT1

GN

D

I/O

15

I/O

14

I/O

13

I/O

12

GN

D

I/O

11

I/O

10

I/O

9

I/O

8

N.C

.

N.C

.

LC

AS

UC

AS

OE

A9

A8

A7

A6

A5

A4

GN

D

VD

D

I/O

0

I/O

1

I/O

2

I/O

3

VD

D

I/O

4

I/O

5

I/O

6

I/O

7

N.C

.

N.C

.

N.C

.

WE

RA

S

A0

A1

A2

A3

VD

D

A1

1

A1

0

16Mbit D-RAM

(1/2)

COMPARATOR

1

82

3

4

BUFFER

(2/2)

76

5

DVD DECODER

(2/8)

(Page 40)

(Page 43)

(Page 44)

Ver. 1.1

HCD-ZX10D

4242HCD-ZX10D

7-13. SCHEMATIC DIAGRAM – DMB07 BOARD (3/8) –

R587

C526

R589

R580

C527

C504

R513

C503

R512

C525

R555

R515

R516

C506

R586

R517

C508

C524R514

C528C529

C509 R522

C510 R527

R529C512

C514 R533

R510

R511

R524

R525

R523

R521

R519

R520

R530

R534

C925 C927

C926

C928

C151

L103

C101

CN102

FL101

R581

C519

R579

IC501

FB105

R368

D901

0

2216V

10k

33k

0.01

33000p

56k

33000p

56k

0.01

0

10k

4.7

k

330p

200k

2.2

k

0.0

01

0.0110k

2216V0.01

330p 4.7k

0.001 2.2k

33k0.01

0.01 33k

150k

150k

10k

10k

10k

100k

100k

10k

56k

56k

2216V 0.01

220

4V

10100

6.3

V

0

2204V

13P

12k

0.01

8.2k

FAN8035L

IC907µPC2933T-E2

0

1SS355TE

C2

C3

C4

C5

C7

C8

C9

C10

C1

VGND

DGND

D5V

AUDIO_DGND

AUDIO_AGND

AUDIO_5V

V5V

A3V-2

DGND

D3V

D3V

MU

TE

_2

D

TFDR

TRDR

FFDR

FRDR

TS

D-M

SP

_O

N

SP

IN

FJM

P2

FJM

P1

SLEDA+

SLEDA-

SLEDB+

SLEDB-

SPDL+

SPDL-

TRK+

TRK-

FCS+

FCS-

DS

AV

E

SL

ED

CT

RL

SL

ED

A

SL

ED

B

SL

ED

SP

FG

M+12V

MGND

D+5V

V+5V

D+3.3V

D+3.3V

AUDIO_GND

AUDIO_5V

GOI

+3.3V REGULATOR

FOCUS/TRACKING COIL DRIVER,

SPINDLE/SLED MOTOR DRIVER

DGND

VGND

DGND

DGND

DGND

(3/8)

(Page 40)

(Page 44)

(Page 45)

(Page 45)

(Page 47)

(Page 55)

HCD-ZX10D

4343HCD-ZX10D

7-14. SCHEMATIC DIAGRAM – DMB07 BOARD (4/8) – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams. • See page 79 for IC Pin Function Description.

R911 R912

R9

05

R9

06

R9

07

R9

78

R9

02

R9

01

C902 C906C901

FL901

C918

R913

R958

R918

C924

R923

C910R935

R970

R9

62

C905 X901

R9

43

R9

42

R9

21

R9

40

R9

30

R9

29

R9

28

R9

26

R9

25

R9

31

R9

32

R9

33

FB9

03

FB9

02

C917 C916

R927X902

C915

R915

R974

R916

R917

C904 C903

FL908

C908 C909

R988

R994

R995

R996

R997

R998

R920

R922

R990

R975 R908

FL903 L901

C907

CN901

IC902

CN101

R964

IC903

C913

IC906

R938

R936

R984

R9

04

IC904

C914

Q901

IC901

10k 10k

22

22

2210

k

22

22

0.01 0.011004V0.01

10k

22

22

0.01

220

0.014.7k

0

10

k

0.01 20MHz

10

0

10

0

10

0

10

0 10

0

10

0

10

0

10

0

10

0

22

22

22

0.01 1004V

1M27MHz

7p

100

0

1k

1k

0.01 1004V100p 100p

0

0

0

0

0

0

100

22

0

10k 10k

0.01

7P

SN74AHC1G32DCKR

5P

10k

BR24L16F-WE2

33000p

SM8707GV-G-E2

10k

100

10k

10

k

SN74AHC2G74HDCU3

9p

DTC114TE-TL

CXP973064-245R

IC111UM6K1N-TN

D1

D2

D3E

1

D4

E2

E3

D5

ZIVA_CTRL_BUS

VIDEO_SW

VIDEO_MUTE

A0

A1

A2

A3

A4

A5

A6

A7

XINIT0

XINIT1

D0

D1

D2

D3

D4

D5

D6

D7

XCS1882

XH

RD

XH

WR

CLK

_R

F

DA

TA

_R

F

SENS

XLA

T

TX

D

RX

D

MD2

PI

JIT

TE

FJMP1

FJMP2

SLED

A

SLED

B

LOCK

FOK

SCLK

GFS_CD

SP_ON

SPFG

SLED

MUTE_2D

MUTE_CD

GFS_DVD

TSD-M

LD

ON

RST_SPC

SD

EN

FE

SC

OR

DR

VR

X

DR

VTX

DR

VC

LK

DR

VIR

Q

DA

TA

CLO

K

SQSO

SQCK

XR

ST_C

D

CO

UT

MIR

R

INLIM

JIT

OFF

DS

AV

E

27M

SY

S_R

ST

DR

VR

DY

DR

VC

LK

CS

_S

PC

CS

_S

PC

LDSEL

WP

SC

L

SC

L

WP

SD

A

MNT1

RXD

TXD

RF_AC

RFMON

I2C

_S

CL

I2C

_S

IO

CDSP2

CDSP4

MR

EQ

I2C

_S

CL

I2C

_S

IO

SDA

JIG_MOD

768FS

DGND

RXD

TXD

RF

GND

3V-D

GN

D

VDD1

VSS1

MO1

NC

VDD2

VSS2

XTI

XTO

NC

NC

NC

SO3

VDD3

VSS3

SO2

SO1

RF_AC

A0

A2

A1

SD

A

SC

L

VC

C

WP

1G 2G

1S 1D

2S2D

G

V

I2C DATA

I2C CLK

MUTE REQ

DGND

SYS RESET

MECHANISM CONTROLLER

EEPROM

LASER DIODE

SWITCHING

CLOCK GENERATOR

(FOR CHECK)

SWITCHING

SELECT SWITCH

SWITCH

(4/8)

VIDEO SW

VIDEO MUTE

(Page 41)

(Page 40)

(Page 53)

(Page 45)

(Page 45)

Ver. 1.1

HCD-ZX10D

4444HCD-ZX10D

7-15. SCHEMATIC DIAGRAM – DMB07 BOARD (5/8) – • See page 75 for IC Block Diagrams.

R9998

R9999

R9980

R9981

IC256

IC258

IC259

C287C286C284

R198

R197R296

R294 R293

R202

Q201

R270

R9882

R9883

R9884

R9885

0

0

0

0

SN74LV573APWR

SN74LV573APWR

SN74LV573APWR

0.010.010.01

4.7k

4.7k0

0 0

47k

DTC114TE-TL

0

0

0

0

0

F2

F4

F5

F6

SIGNAL_BUS

EXT_SIGNAL_BUS

D3V

SD7

SD6

SD5

SD4

SD3

SD2

SD1

SD0

XSAK

SDEF

XDCK

XSHD

ADC_DATA

AV7

AV6

AV5

AV4

AV3

AV2

AV1

AV0

XSAK#

SDEF#

XSRQ

BC

K

LR

CK

XSRQ_SAMBA

XDCK#

INVERTER

LATCH

LATCH

(5/8)

LATCH

(Page 41)

(Page 47)

(Page 42)

(Page 45)

HCD-ZX10D

4545HCD-ZX10D

7-16. SCHEMATIC DIAGRAM – DMB07 BOARD (6/8) – • See page 74 for Waveforms. • See page 79 for IC Pin Function Description.

CN202

C241

C279

C242

C248

C253

C278

C277

C263

C252

R14

R13

R12

R213

R15

R280 R281 R282R279R278

R263 R264 R265 R266 R267C233 C232 C231 C230

R251

C236

C274

C276

C237

C238

C229

R283

C226R261

R1000R259

R260

IC204R240

R10

R11

C272

C281

C261

C271

C280

C270

C269

C268

C282

C267

R257

R245

R232

R284

C265 C266 C283

FL205

C262 C247

C256

R230

R231

R241

R227

C257

R234 R253 R254

C291

FL206

C213C215C214

C204

R277R276R275R274R273

R268

R217

R269

R220

R272

R271

R221

R222

R219

R291

R292

R805

R244

R247

C260

R248

C244C251C290

R246

C234

CN105

R290

IC207

R225 R226

R228

Q202

C216

R299

R255

D202

4P

0.01

100p

0.01

0.01

0.01

100p

100p

0.01

0.01

22

22

22

68

22

75 75 757575

75 75 75 75 750.01 0.01 0.01 0.01

0

0.01

0.01

0.01

0.01

0.01

0.01

1k

0.1

4.7k

4.7k4.7k

4.7k

BR9040F-WE247k

22

22 0.01

100p

0.01

0.01

100p

0.01

0.01

0.01

100p

0.01

4.7k

4.7k

33

180

10 0.01 100p

0.01 0.01

0.01

33

33

0

4.7k

0.01

10k 4.7k 4.7k

100p

1004V0.010.01

0.01

00000

0

0

00

100

100

00 0

100

100

0

1k

1k

0.01

4.7k

0.010.01100p

10k

0.01

17P

100

ZIVA5X-C2F-B

IC211µPC2918T-E1

0 0

0

DTC114TE-TL

0.0

1

820

0

1SS355TE

F4

G2

G3

G4

G5

G6

G7

G8

G9

F3

F2

F6

DAC_CTRL_BUS

A3V-2

DGND

D5V

D3V

VGND

V5V

ZIVA_5.1CH_BUS

ZIVA_CTR_BUS

VMUTE

VIDEO_SW

MWE

DRVCLK

DRVTX

DRVRX

DRVRDY

DRVIRQ

RST_SPC

MCLK

I2C_SIO

I2C_SCL

MDQM0

MDQM1

SYS_RST

CS

_S

PC

AV7

AV6

AV5

AV4

AV3

AV2

AV1

AV0

XSRQ_ZIVA

XSAK#

SDEF#

XDCK#

ML

MC

MD

I

MR

EQ

MREQ

MREQ

MA

0

MA

1

MA

2

MA

3

MA

4

MA

5

MA

6

MA

7

MA

8

MA

9

MA

10

MA

11

MC

AS

MR

AS

MC

SO

BA

0

BA

1

JIG_MOD

MDQM3

MDQM2

MD28

MD29

MD30

MD31

MD20

MD21

MD22

MD23

MD24

MD25

MD26

MD27

MD16

MD17

MD18

MD19

WIDE

WID

E

I/PSW

I/P

SW

CR/R

CR/R

CB/B

CB/B

Y/G

Y/G

C

C

V

V

MD15

MD14

MD13

MD12

MD11

MD10

MD9

MD8

MD7

MD6

MD5

MD4

MD3

MD2

MD1

MD0

XC

K1

LR

CK

1

BC

K1

DA

TA

0

DA

TA

1

DA

TA

2

DA

TA

3

27M

SYS_RST

ALE

HA2

HA3

HA

D10

HA

D9

HA

D8

HA

D7

HA

D6

HA

D5

HA

D4

HA

D3

HA

D2

HA

D1

HA

D0

HA

D15

HA

D14

HA

D13

R/W

HA

D11

HA

D12

HA

1

XC

K

LR

CK

BC

K

R/B

VCC

CS

SK DI

DO

GND

WC

TXD

RXD

GND

D5V

WIDE

V

V_GND

C

C_GND

V_GND

DVD SYSTEM PROCESSOR

I G O +1.8V REGULATOR

EEPROM

(FOR CHECK)

(6/8)

VMUTE

Y

Y_GND

CB

CB_GND

CR

CR_GND

V_GND

V_5V

I/P_SW

BUFFER

VIDEO.SW

(Page 44)

(Page 43)

(Page 42)

(Page 46)

(Page 42)

(Page 49)

(Page 43)

(Page 47)

Ver. 1.1

HCD-ZX10D

4646HCD-ZX10D

7-17. SCHEMATIC DIAGRAM – DMB07 BOARD (7/8) – • See page 75 for IC Block Diagrams.

C239

C227

C245

C249

C218

C220

C235

C240

C243

C246

C250

IC203

C259C258

C255 C254

C205

C202 C203 C275C201

FL203

FL204

R301IC233

IC232

IC231

IC205

C264

R250

R215

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

0.01

HY57V283220T6

0.0110

10 0.01

0.01

0.01 0.01 0.010.01

1kSN74LV573APWR

SN74LV573APWR

SN74LV573APWR

MR27V3202F

0.01

0

0

G2

G3

G4

G5

G6

G7

G8

G9

MA0

MA1

MA2 MA3

MA4

MA5

MA6

MA7

MA8

MA9

MA10

MDQM0 MDQM1

MDQM2 MDQM3

BA0

BA1

MWE

MCLK

MCAS

MRAS

MCSO

HAD0

HAD1

HAD2

HAD3 HAD4

HAD5

HAD6

HAD7

HAD8

HAD9

HAD10

HAD11

HAD12

HAD13

HAD14

HAD15

HA1

HA2

HA3

HA4

HA5

HA6

HA7

HA8

HA9

HA10

HA11

HA12

HA13

HA14

HA15

HA16

HA17

HA18

HA19 HA20

MA11

HA21

MD0

MD1

MD2

MD3

MD4

MD5

MD6

MD7 MD8

MD9

MD10

MD11

MD12

MD13

MD14

MD15

MD16

MD17

MD18

MD19

MD20

MD21

MD22

MD23 MD24

MD25

MD26

MD27

MD28

MD29

MD30

MD31

HA

D0

HA

D1

HA

D2

HA

D3

HA

D4

HA

D5

HA

D6

HA

D7

HA

11

HA

10

HA

9

HA

8

HA

7

HA

6

HA

5

HA

4

HA

19

HA

18

HA

17

HA

16

HA

15

HA

14

HA

13

HA

12

HA

22

HA

21

HA

20

R/W

HA

2

HA

2

HA

1

HA

D1

5

HA

D1

4

HA

D1

3

HA

D1

2

HA

D1

1

HA

D1

0

HA

D9

HA

D8

SYS_RST

ALE

WE

A18

A17

A7

A6

A5

A4

A3

A2

A1

A0

CE

VSS

OE

DQ0

DQ8

DQ1

DQ9

DQ2

DQ10

DQ3

DQ11

A19

A8

A9

A10

A11

A12

A13

A14

A15

A16

BYTE

VSS

DQ15

DQ7

DQ14

DQ6

DQ13

DQ5

DQ12

DQ4

VCC

128Mbit SD-RAM

ADDRESS

LATCH

ADDRESS

LATCH

ADDRESS

LATCH

A20

(7/8)

PROGRAM ROM

(Page 45)

HCD-ZX10D

4747HCD-ZX10D

7-18. SCHEMATIC DIAGRAM – DMB07 BOARD (8/8) – • See page 75 for IC Block Diagrams.

C324 C323 C322

CN107

R369

R1302

C1302

D1304 D1303

R352R353

C357 C356

R362

C355C352

IC352

C365

C368

C367C363

R335

R327

R329

R328

C366

C364

FL303

D393 D394R392

C393 C394C392

IC392

IC302

C321

R309 C309

C308R308

R307 C307

C306R306

R305

C305

C304R304

R302

R303

C302

C303

R312

R311

R310

R313FL302

C326C325

JW803

JW802

JW801

R314

JW804

JW805

JW806

D392

JW392

FL352

0.1 0.1 0.1

21P

0

0

0.1

1SS355TE 1SS355TE

00

150V

150V

10k

1006.3V

1006.3V

PCM1800E/2K

0.1

470p

470p0.1

0

0

0

0

1006.3V

1006.3V

1SS355TE 1SS355TE10

0.01 2204V

2216V

µPC2933T-E1

PCM1609KPTR

1006.3V

220 100p

100p220

220 0.01

0.01220

220

0.01

0.01220

220

220

0.01

0.01

100

100

100

10k

0.011004V

0

0

0

22

0

0

0

1SS355TE

0

DAC_CTRL_BUS

EXT_SIGNAL_BUS

DGND

AUDIO_5V

AUDIO_AGND

AUDIO_DGND

ZIVA_5.1CH_BUS

MDI

MC

ML

LRCK

BCK

ADC_DATA

XCK

DA

TA

0

DATA1

DATA2

DATA3

BCK1

LRCK1

XCK1

CENTER

A-GND

SURROUND-L

SURROUND-R

FRONT-L

A-GND

FRONT-R

A-GND

A-GND

DOWNMIX-L

DOWNMIX-R

A-GND

A-GND

SW(LFE)

A-GND

A-GND

A-GND

AUDIO_5V

AUDIO_GND

(8/8)

ANALOG-IN-R

ANALOG-IN-L

A/D CONVERTER

+3.3V REGULATOR

GOI

D/A CONVERTERD/A CONVERTER

(Page 45)

(Page 42)

(Page 44)

(Page 56)

Ver. 1.1

HCD-ZX10D

4848HCD-ZX10D

7-19. PRINTED WIRING BOARD – VIDEO BOARD – • See page 35 for Circuit Boards Location.

JW1203

JW12

09

JW12

06

JW12

00

JW12

24

JW12

25

JW12

18

JW12

11

JW12

12

JW12

13

JW12

14

JW12

15

JW1226

JW12

01

JW12

02

JW12

28

JW12

08

JW12

29

JW12

30

JW12

31

JW12

32

JW12

34

JW12

36JW

1237

JW12

38

JW12

39

JW1241

JW12

17

JW12

35

JW12

05

C1202

C1204

C1205

C1206

C1207

C1208

C1209C1210

C1211

C1215

C1216

C1217

C1218

C1226

CN1201

J1200

J1201J1202

C1201

C1214

C1231

CN1200

C1213

CN1202

JW12

40

JW1242

JW12

27

JW12

33

JW12

43

C1200

C1203

C121

2

C1219

C1220

C1221C1222

C1223C1224

C1225

FB1200 FB1201

FB1202

FB1203

FB1204

FB12

05

IC1200JR1202

JR1203JR1204R1

210

R120

0

R120

1

R1202

R1203

R120

4

R1205

R1206

R120

7

R120

8

C122

8

JR1209

IC1201

JR1205

C123

0

R1231R1233

R1232

FB1206JR1208

Q1200R1223

JR1210

JR1211

E

14

1

15

28

1-862-130-

11

(11)

VIDEO BOARD

1

1

4

8

5

2

12

GAME/HPBOARDCN802

(Page 62)

H

MAINBOARDNO206

(Page 51)

G

(CHASSIS)(CHASSIS)

C YG

S VIDEO OUT

VIDEO OUT PR/CR PB/CB Y

COMPONENTVIDEO

DMB07 BOARDCN105

(Page 38)

D

A

B

C

D

1 2 3 4 5 6

HCD-ZX10D

4949HCD-ZX10D

7-20. SCHEMATIC DIAGRAM – VIDEO BOARD – • See page 74 for Waveforms.

C1215

C1216

C1217

C1218

R1205

R1204

R1203

R1202

C1214

R1207

C1213

R1210

C1222R1233

R1232

C1219

C1220

C1221

J1200

R1208

C1223C1224

C1203

C1204

C1231C1201

C1200

C1202

C1211 C1212

C1206

C1205

C1207

C1226

C1225

C1208

C1210

C1209

R1223

IC1200VIDEO SWITCH, 75Ω DRIVER

CN1202

R1200

CN1200

CN1201

J1201

J1202

JW1200

JW1202

JW1203

JW1206

JR1209

FB1205

JR1205JR1208

JR1202

JR1210 JW1208

Q1200

JW1205

JR1204

JR1203

FB1202

FB1201

FB1200

FB1204

R1201

FB1203

R1231

JW1201

R1206

FB1206

C1230

C1228

IC1201

VIDEO AMP, 75Ω DRIVER

JW1209

1000 6.3V

1000 6.3V

1000 6.3V

1000 6.3V

75

75

75

75

1000 6.3V

10k

1000 6.3V

100

22p100k

68

22p

22p

22p

3P

75

22p22p

0.01

10010V

10006.3V10 50V

100p

1050V

10010V 0.1

1 50V

1 50V

1 50V

2250V 0.1

1 50V

1 50V

1 50V

10k

NJM2244M

17P

10k

2P

2P

1P

0

0

0

0

0

DTC114EKA

0

0

0

0

0

0

10k

0

1M

75

0

0

MM1623BF

C

Y

CB

CR

(CHASSIS)

(CHASSIS)

V

WIDE

VMUTE

I/P_SW

VIDEO OUT CONTROL

PR/CR

PB/CB

Y

COMPONENT

VIDEO

VIDEO OUT

S VIDEO OUT

SELECT SWITCH

INTERLACE/PROGRESSIVE

VIDEO +9V

V_5V

V_GND

CR_GND

CB_GND

Y_GND

C_GND

V_GND

V_GND

VIDEO.SW

GM-SIG

GM-GND

(Page 45)

(Page 53)

(Page 63)

HCD-ZX10D

5050HCD-ZX10D

7-21. PRINTED WIRING BOARDS – CHANGER SECTION –• See page 35 for Circuit Boards Location.

MD-94 BOARD

(13)

13

TRAYOPEN/CLOSE

DETECT

SE-130 BOARD

1

6

2

34

2

5 1

(13)

13

2

1

4

3

OPEN CLOSE

S002ROTARY ENCODERCHUCKING DETECT,TRAY OPEN/CLOSE

DETECT

M001(LOADING)

MAIN BOARDCN509

(Page 51)F

MM

M002(TABLE)

MM

PH102

A

B

C

D

E

F

G

1 2 3 4 5 6 7

7-22. SCHEMATIC DIAGRAM – CHANGER SECTION –

0.1

1.2

1.2 2.3

0.1

1

A

B

C

D

E

F

G

H

I

J

2 876543

11PCN001

1

2

3

4

5

6

7

8

9

10

11

3PCN003

1

2

3

2PCN004

1

2

6PCN101

1

2

3

4

5

6

RPR-220C1NPH101

1

2

3

4

RPI-392PH102

43

2PCN102

1

2

OCSW2

OCSW1

CKSW1

SGND

SENSOR LED

TSENS

DSENS

LM-

LM+

TM+

TM-

OCSW1

CKSW1

SGND

LM-

LM+

SGND

TM-

TM+

TM-

SENSOR LED

TM+

TSENS

DSENS

MD-94 BOARD

SE-130 BOARD

DISC INDETECT SENSOR

TABLESENSOR

PH102

MAINBOARD

(4/5)CN509

(Page 55)

F

6PCN002

1

2

3

4

5

6

SENSORLED

TSENS

DSENS

SGND

TM+

TM-

S001TRAY

OPEN/CLOSEDETECT

OPEN

CLOSE

MM

S002ROTARY ENCODERCHUCKING DETECT,

TRAY OPEN/CLOSE DETECT

M001(LOADING)

MM M002(TABLE)

12

• : Uses unleaded solder.

HCD-ZX10D

5151HCD-ZX10D

7-23. PRINTED WIRING BOARD – MAIN BOARD – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

JW55

2

JW30

1

JW302

JW30

3

JW30

6

JW30

7

JW30

8

JW312

JW31

3

JW316

JW317

JW31

9

JW32

0

JW32

1

JW32

2

JW50

0

JW502

JW50

3

JW505

JW50

6

JW50

9

JW51

0

JW51

1

JW513

JW53

2

JW53

3

JW53

6

JW53

7

JW539

JW54

0

JW54

3

JW54

4

JW55

5

JW55

6

JW55

7

JW55

8

JW55

9

JW56

0

JW56

2

JW56

3

JW565

JW569

JW570

JW571

JW572

JW57

4

JW57

5

JW577

JW578

JW579

JW589

JW590

JW20

1

JW20

2

JW20

3

JW204

JW20

5

JW206

JW207

JW208

JW209

JW210

JW21

2

JW21

3

JW21

4

JW21

5

JW21

6

JW217

JW21

8

JW21

9

JW22

0

JW221

JW222

JW223

JW22

4

JW22

5

JW22

6JW22

7

JW228

JW229

JW23

0JW23

1

JW23

2

JW233

JW234

JW235

JW236

JW237

JW238

JW10

0

JW101

JW110

JW111

JW112

JW116

JW117

JW118

JW12

3

JW12

8

JW13

0

JW13

1

JW13

5

JW13

6

JW13

7

JW13

8 JW13

9 JW14

0

JW14

1

JW142

JW143

JW144

JW145

JW147

JW148

JW149

JW150

JW151

JW152

JW153

JW154

JW15

5

JW156

JW157

JW15

8

JW15

9

JW16

0JW

161

JW163

JW16

4JW

165

JW16

7

JW16

9

JW17

0

JW17

1

JW700

JW701

JW59

1

JW592

JW59

4JW

595JW

597

JW59

8

JW59

9

JW175

JW176

JW177

JW178

JW17

9JW

180

JW18

1

JW183

JW184

JW185

JW18

7

JW40

0

JW40

1

JW40

2

JW40

3

JW40

4

JW40

5

JW40

6

JW40

7

JW40

8 JW409

JW41

0

JW41

1

JW41

2

JW41

3

JW41

4

JW41

5

JW417

JW418

JW422

JW423

JW424

JW425

JW428

JW429

JW430

JW432

JW433

JW434

JW436 JW437

JW440

JW441

JW443

JW444

JW445

JW446

JW447

JW44

8

JW45

0

JW45

1

JW45

2

JW454JW455

JW456

JW457 JW458

JW459JW460

JW461

JW46

2

JW46

3

JW46

4

JW46

5

JW46

6

JW46

7

JW46

8

JW46

9

JW47

1JW

472

JW473

JW474

JW476

JW477

JW478

JW490

JW491

JW49

2

JW49

3

JW49

4JW49

5

JW49

6JW49

7

JW49

8JW

188

JW23

9

JW24

0

JW24

1

JW24

2

JW24

3

JW24

4

JW24

5

JW247

JW249

JW18

9

JW19

0

JW19

1

JW192

JW194

JW48

4

JW48

5

JW487

JW48

8

JW19

5

JW197

JW198

JW48

1

JW48

2

JW483

JW489

JW56

1

JW521

JW54

5

JW182

JW32

3

JW514

JW51

5

JW50

7

JW60

1

JW518

JW517

JW516

JW53

5

JW30

0

JW311JW

593

X402

X401

T101

NO401

NO103

NO102

L104

L103

CN507

CN504

CN104

C539C538

C535C534

C533 C532

C531

C530

C526

C525

C516

C515

C513

C517

C510

C509

C508

C507

C506

C504

C503

C502

C500

C462

C416

C404

C403

C402

C196

C195

C194

C191

C180

C177

C175

C174

C173

C172

C171

C169

C168

C166C165

C164

C163

C162

C160

C159

C158C155

C154

C153

C152

C148C145

C140 C138

C128

C127C125

C124

C120

C117

C116

C113

C112

C111

C110

C108

C106

C104

C103

C102

C101

Q553

IC515

IC514

IC511

IC510

EPT501

D501

CN513

CN506

CN505

C598

C597

C591

C590

C306

C302

IC513

CN502

C251C226

C233

C223

C222

C221

C220

C219

C205

C200

D502

CN404

C131

C130

C129

C592

L580

IC518

IC517

IC516

C599

C596

C583

C580

C541

C257

C255

C254

C253

C252

C249

C248

C247C246C245

C239

C237C235

C234C231

C230

C229

C225C224

C213

C211C210C209

C208

C207

C206C203

C202

C201

J202

NO206

JW119JW480

JW431

JW30

5

JW419

JW427

JW426

J701

JW479

JW442

C342

JW31

4

C178

C167

JW12

4

JW125

JW17

2

JW17

3

JW438

JW439

JW17

4

JW47

0

JW44

9

JW16

8

JW162

JW126

JW12

7

JW48

6

JW13

4

JW113

JW16

6

JW702

NO511

NO510

JW520

JW630

JW63

2

JW63

7

JW63

9

JW61

8

JW61

9

JW12

2

JW631

JW107

JW634

JW63

3

JW60

3

JW60

4

JW108

JW60

8

JW109

JW61

3

JW61

2

JW61

6

JW615C543

JW64

4

JW60

9

JW607

JW60

5

JW31

5

JW64

1

JW61

0

JW309

JW105

JW106

JW60

6

JW435

JW41

6

JW31

8

JW573

JW211

JW146

JW651

JW65

2

D408

JW80

0

JW20

0

JW58

7

JW24

8

L581

JW55

4

JW327

JW58

6

JW54

1

JW63

8

JW64

0

JW61

7

JW32

5

JW63

5JW

642

JW32

6

JW66

5

JW66

4

JW61

4

JW655

JW66

1

C293

C292

JW65

3

JW64

3

JW19

9

JW66

2

JW66

3

CN503

CN508

JW45

3

JW32

8

JW50

8

JW580

JW658

JW65

9

JW66

0

D581

D580

JW57

6

JW420

C132

C401

JW666

JW475

JW512

JW246

C582

C585

JW53

4 JW53

0

JW567

JW564

JW52

9

JW50

4

JW49

9

JW52

5

JW53

8

JW65

0

JW193

JW656

JW526

JW566

JW657

JWH500

JW250

JW58

3

JW611

JW550JW548

NO580

NO581

JW11

5

JW568

JW52

8

JW527

JW324

JW523

JW522

JW51

9

C498

C204

CN509

R279R278

Q270

JR206

JR20

7

JR21

2

R253

R252R245

R240

R234

R232

R231 R2

29 R228

R227

R226

R225

R215

R207

R206

R201

R200

Q204

Q203Q201

Q200 IC501

C243

C242

JR10

3R2

81

R280

R277

R276

R275

R274

R273

R272

R271

R270

R269

R268

R267

R266

R265

R264

R263

R262

R261

R260

R259

R258

R257

R256

R255

R254

R251R250

R248

R247

R246

R244

R243

R242

R241R239

R238

R237

R236

R235

R233

R230

R224

R223

R222

R221

R220

R219

R218

R217

R216

R213

R212

R211

R210

R209

R208

R205

R204

R203

R202

Q212 Q211

Q210

Q209 Q208

Q207

Q206

Q205

Q202

C259

C244 C240

C238

C236

C232

C228

C227

C241C218

C217 C216C215

C214

C212 R249

R588

R587

R586

R585

Q557Q555

D554

C587

C586

C528

JR214

JR11

8

R561

R560

R559R558

R557

R556R555

R554

R530

R529

R528

R527

R526

R525R5

24

R523

R522R521

R520

R519 R518

R517

R516

R515

R514

R513

R512

R511

R510

R509

R508

R507

R506

R505

R504

R503

R502

R501

R500

R341

R192

R188

R187

R186

R185

R184

R183

R182

R181

R179 R178

R172

R171

R170

R169 R1

68

R167

R166

R165

R164

R162

R161

R160

R159

R158

R157

R156

R155

R154 R152

R151

R150R148

R147

R145

R143

R142

R141

R140

R139R138

R137

R136

R135R134

R133

R132

R129

R128

R127

R126

R125

R124

R123

R122 R121

R120

R119

R118

R117

R115

R114

R113

R112

R111R110

R109

R108

R107

R106

R105

R104

R101

Q524

Q523

Q180

Q165

Q145

Q140

Q114 Q113

Q112

Q111

Q110

Q109

Q108

Q107

Q106

Q105

Q103

Q102

FB503

FB50

2

FB50

1

FB50

0

C529

C527

C524C5

23

C522

C521

C520C519

C518

C512

C514

C511

C505

C501

C192

C182

C176

C157

C156

C151

C149

C147

C146C144

C143

C142

C141

C139

C137

C135

C134

C133

C126

C122

C121

C119

C118

C107

Q563

R153

R149

R103

R102

JR104

JR102

R131

R130

IC51

9

R391

JR506

JR403

JR404

R404

R576

R575

R573

R572

R568

R567

R566

Q402

R487

R486

R482

R481

R477

R476

R475

R473

R466R465

R454

R453R452R451R450

R449R448

R447

R446

R445

R437R436

R434

R433

R432

R431

R430

R429R4

28

R427

R426

R425

R424R4

23

R422

R421

R420

R419R4

17

R413

R412

R411

R409

R401

R198

R197

R196

R194

R193

R191R190

R189 R180

R177R176

R175

R174

R173

Q537

Q538

Q536

Q533

Q535

Q534

Q401

Q199

Q198

Q195

Q194

Q192

Q190

FB46

2

FB41

6

D407

D406

D405

D404

D403 D402

D194

D193

D192

C499C497

C464

C414

C412

C411

C410

C387

C386

C186

R195

R571

R569

R468R467

R493

R492

R393

R574

R570

R565

Q532

R494

Q531

C584

R328

R318

R317

R316

R315

R314

R313R312

R311

R310

R309

R308

R307

R306

R305

R304

R302

R301

R300Q870

C595

C594

C341C307

C305

C304

C303

C301 C300

R583R582

R581

R580

R577

Q509

Q506

C542

C540

JR50

1

JR10

5

R303

L102

L300

C109

C115

C150

IC402

Q115Q116

R282 R283

Q540Q539

R578

R579

R584

Q530

R531

Q101

JR111

JR11

3

JR11

4

JR11

5

R395

JR40

8

R444

C187

D553

Q293 Q292 R297

R296

R298

R290

R291

R292

R293

R294

R295

R288

R289

Q291

Q290

R590 R591 D329

Q590

R284

R285

R286

R287

JR218

C170

C123

JR20

4

JR50

9

R439

JR514

JR515

JR517

JR51

8

JR519

JR13

1

JR11

2

JR441

JR21

6

JR512

JR510

C395

Q528Q529

JR40

2

C185

R199

R299

Q196

Q193

Q191

Q104

JR503

JR502

JR505

JR504

JR50

0

JR475

JR40

9

JR406

JR407

JR405

JR400

JR401

JR300

JR21

7

JR215

JR213

JR21

1

JR210 JR209

JR208

JR205

JR107

JR108

JR10

9

JR11

0JR

116

JR119

JR270

R397

R562R563

FB582

FB583

JR51

3 JR516

C183

C181

C188

C184

JR44

0

JR471

R214

C136

R474

Q554

Q552

IC401

IC101

JW310

C114

C179

JW620

JW553

E

E

E

FB58

5

FB584

C545

C544

C536

E

E

E

E

E

C

B

E

E

E

E

E

E

E

E

E

E

EE

EE

E

E

E

1

7

E

E

13

4 5

3 1

E

E

EE

E

EE

EE

E

E E

E

E

E

E

E

1

1 3

4E

E

E

14

85

1

31

3080

81

100

5051

1

80

40

41

24 25

65 64

E

EEE

E E

EE

E

E

E

EE

BIAS OSC

E

E

E

E

E

E

EE

EE

E

E

E

E

1-861-315-

11

(22)

MAIN BOARD

(CHASSIS)

DMB07BOARDCN107

(Page 38)

E

DMB07BOARDCN102

(Page 38)

B

POWERBOARDCN601

(Page 57)

Q

13

1

1

6

1

6

1

13

POWERBOARDCN602

(Page 57)

P

MD-94 BOARDCN001

(Page 50)F

VOLTAGE SELECTORBOARDCN1000

(Page 72)

KPANEL BOARDCN906

(Page 64)J

1

99 1

3

3

1

3

1

1

1

4

5

2

4

1

5

2

4

1

4

1

4

1

1

1 11

13

1 3

M501(FAN)

M

SUBWOOFER OUT

1 21

42 22

SURROUND BOARDNO702

(Page 60)N

MIC BOARDCN920

(Page 62)MGAME/HP BOARDCN801

(Page 62)L

(CHASSIS)

R L R L R L

VIDEO/SATOUT

VIDEO/SATIN

PHONOIN

8

1

1

3

HPRE101(REC/PB/ERASE)

(DECK-B)

HP101(PB)

(DECK-A)

TUNERUNIT

SUPPLIEDWITH THE

ASSEMBLEDBLOCK

FM75Ω(COAXIAL)

AM

(E15, SP,MY)

(E15, SP, MY) (MX,

AUS

)

(E15, MX, AUS)

DMB07BOARDCN101

(Page 38)

C

VIDEOBOARDCN1200

(Page 48)

G

1 2

A

B

C

D

E

F

G

H

I

J

1 2 3 4 5 6 7 8 9 10 11 12 13

TAPE MECHANISMBLOCK

SUPPLIED WITH THEASSEMBLED BLOCK

(AUS)

(AUS)

(E15

, SP,

MY)(E15, MX, SP, MY)

D192 G-3D193 G-3D194 H-3D329 H-13D402 I-6D403 I-5D404 I-5D405 J-5D406 I-6D407 J-5D408 J-10D501 H-12D502 H-11D553 B-11D554 B-11D580 G-9D581 G-9

IC101 E-5IC401 H-5IC402 I-5IC501 C-10IC510 G-10IC511 G-10IC513 I-11IC514 J-13IC515 I-12IC516 G-9IC517 F-9IC518 H-9IC519 B-6

Q101 B-3Q102 C-3Q103 C-3Q104 B-3Q105 B-3Q106 C-4Q107 C-4Q108 C-4Q109 C-4Q110 C-4Q111 C-3Q112 C-4Q113 C-4Q114 C-4Q115 C-4Q116 C-4Q140 D-6Q145 F-6Q165 C-4Q180 E-3Q190 H-4

• Semiconductor Location

Ref. No. Location Ref. No. Location

Q191 G-3Q192 G-4Q193 H-3Q194 H-4Q195 H-3Q196 H-3Q198 G-4Q199 G-4Q200 C-9Q201 B-9Q202 C-8Q203 B-8Q204 B-8Q205 D-12Q206 C-12Q207 C-12Q208 C-12Q209 C-11Q210 C-11Q211 B-12Q212 B-11Q270 B-10Q290 E-12Q291 D-12Q292 E-12Q293 E-12Q401 I-5Q402 H-6Q506 G-9Q509 H-9Q523 E-6Q524 D-6Q528 G-3Q529 F-4Q530 E-4Q531 I-7Q532 I-6Q533 H-7Q534 I-6Q535 H-7Q536 H-6Q537 H-6Q538 H-6Q539 G-7Q540 G-7Q552 I-11Q553 B-11Q554 I-11Q555 B-11Q557 B-11Q563 B-7Q590 H-13Q870 J-12

Ver. 1.1

HCD-ZX10D

5252HCD-ZX10D

7-24. SCHEMATIC DIAGRAM – MAIN BOARD (1/5) – • See page 74 for Waveforms.

R454

R453

R452

R451

R450

CN104

R192

R138 C139 R142 R170

R172R143C149R139

C154 L104C152 L103

R155C182

C196

R157

R164 R160

Q104

R158 R136 C157

C156 R137

R299R199

R284

R285C137

C142

C170

NO103

R449

R448

R447

CN504

R182

R183

R184

R185

R186

R187

C173

C172

R169R341

R179

C179

C180R171

C178

C168

R167

R178

C167

C165

R166

Q165

R104

C166

R165

C108

R110 C151

C109

R108

C106

R111C141

R286R117

C117

C119

C118

C121

C120

C124

R115

C103

C104

C102

R101

R129R128

C174

R126

C171

R134

R135

C107

C116

R106C138

C140

C128R133R125

C164

C163

C162

C159

C160

R159

C155

R154

C153

R152

R151

C150

R161

R145

C146

C147

C148

C144

C143

C110

R147

R188

C134

C133

R149

R153

R148

NO102

R189R180

R177

R176 Q193

R194R191

Q194

Q191

R175R174

Q192

R173

C186

R109 R127 R122 R124

R123

R119

Q110

Q108

Q109

Q106 Q107

R190

Q195

D194

R150

C145

C126C176

Q103

C175

HRPE101 HP101

C127

C113

C177

C101

IC101

R181

Q180 C169

C188

C185

C184

R168

C181

C125

C114

R107

R531

JR104

C158

R141

R140

Q140

C129

C131

R105

R131 C

132

JR102

D192

D193

Q101

T101

Q115 Q116

R283R282

Q114Q112

Q113Q111

C183

C111

C112

R162

R113

R132

R120

R118

C122

R114

C115

C130

R130

C135

R287

R121

R102

R103

C192

C191

Q102

C123

Q105

C187

Q196

Q145

C194

C136

R156

10k

10k

10k

10k

10k

13P

3.3k

4.7k 0.001 27k 0

027k0.0014.7k

120p 27mH120p 27mH

10k0.01

4716V

10

4.7k 47k

L102100µH

RT1P137P

33 5.6k 0.0022

0.0022 5.6k

100k100k

10k

10k0.01

0.01

330p

8P

10k

10k

10k

11P

100

100

100

100

100

100100

16V

100

16V

180180

12k

0.01

10 50V1k

150V

0.01

12k

330k

150V

1050V

1k

2SC5938

10k

1050V

47k

4716V

15k

0.01

220p

27k150V

15k0.01

47k2.2k

2.250V

0.022

0.022

0.03310

50V

1050V

1k

10 50V

10 50V

1050V

47k

2.2k2.2k

47016V

470

0.27

470

470

0.1

10016V

4700.47

0.27

0.4750V1M47k

10 50V

10 50V

10 50V

10 50V

1 50V

0

0.068

10k

10 50V

100

10k

0.1 6.8k

10k

0.022

0.022

2.2 50V

0.033

0.0047

1050V

2.2k

100

680p

680p

0

0

2.2k

3P

6803.3k

3.3k

3.3k 2SB1132

6802.2k

DTC114EKA

2SB1132

6802.2k

DTC114EKA

2.2k

0.0047

2.2k 2.2k 2.2k 2.2k

10k

10k

2SA812

DTC114EKA

DTC114EKA

DTC114EKA DTA124EKA

2.2k

DTC114EKA

1SS355

1k

1050V

680p680p

2SC3661

0.47

10 50V

1050V

M61537FP-RFOG

10k

2SC5938 1050V

0.1

22p

22p

330k

100p

1k

1.2k

0

0.47

47k

10k

2SC1623

2.2 50V

0.22

10k

1k

150V

0

1SS355

1SS355

2SD596

2SC5938 2SC5938

10k10k

2SC36612SC3661

2SC36612SC3661

100p

0.4750V

10 50V

1M

100

6.8k

10k

2.2k

0.0047

10k

0.1

0.1

2.2

k

220p

47k

10k

0

0

0.0

0470.01

100V

2SC3661

330p

DTC114EKA

0.0047

2SB1132

2SC1623

0.0068

220p

47

A1

A2

A3

A4

A5

A6

A7

B1

B2

B3

B5

B6

B7

C1

C2

C3

C4

51

53

55

56

58

89

90

91

59

FR

FL

LINK-R

60

4PIN

13PIN

62PIN

52PIN

LCH

RCH

MICIN

63PIN

3PIN

LIN

K-L

A1

A2

A4

A5

A6

A7

DM

L-O

UT

DMR-OUT

A9

52

57

54

14PIN

51PIN31PIN

82

83

84

85

86

87

88

ST-CLK

TUNED

ST-CE

STEREO

ST-L

ST-R

ST-MUTE

ST-DOUT/MC-DIN

ST+9V

STGND

CAPM+

AHALF

APLAY

ASHUT

BSHUT

BPLAY

ATRGM+

BTRGM+

BHALF

REC(FWD)

REC(REV)

TC DGND

TCM MGND

L-PB

L-REC

R-PB

E-HOT

R-REC

GND

GND

GND L-PB

R-PB

GND

(1/5)

L-CH

R-CH

(PB)

(DECK-A)

L-CH

ERASE

R-CH

(REC/PB/ERASE)

(DECK-B)

THE ASSEMBLED

BLOCK

SUPPLIED WITH

TAPE MECHANISM

BLOCK

AM

ANTENNA

COAXIAL

FM75Ω

SUPPLIED WITH

THE ASSEMBLED

BLOCK

TUNER UNIT

ST-DIN/MC-DOUT

TONE CONTROL,

DECK A/B SELECT SWITCH,

REC/PB EQ AMP,

INPUT SELECT SWITCH,

ELECTRICAL VOLUME,

BASS BOOST AMP

MUTING

MUTING MUTING

MUTING

SWITCH

FEED BACKSWITCH

FEED BACK

TRIGGER PLUNGER DRIVE

Q195,196

(DECK-B)TRIGGER PLUNGER DRIVE

Q191,192

(DECK-A)

CAPSTAN/REEL MOTOR DRIVE

Q193,194

Q104,105

REC BIAS

SWITCH

BIAS OSC

BIAS OSC

MUTING MUTING

Q106-110

MUTING CONTROL

SWITCH

MUTING MUTING

MUTINGMUTING

(Page 53) (Page 56) (Page 54)

Ver. 1.1

HCD-ZX10D

5353HCD-ZX10D

7-25. SCHEMATIC DIAGRAM – MAIN BOARD (2/5) – • See page 74 for Waveforms. • See page 79 for IC Pin Function Description.

D402

CN507

NO401

C395

R395

C403

R428

D403

R426

C404

D407

R427

VOUT

VDD

GND

NC

NC

D405

C412

R409

D404

R401

C416

C410

C411

X402

R412FB416

R413

R411

R417

R419

R420

R421

R422

R423

R424

R425

R431

R429

R430

C414C499

C497

R437R436D406

C387

C386

R481

R482R486R487

R393

R193 R494

R445

R446

R444

R434

R439

R432

R584

R578

C535

C534

Q536

R568

Q198

Q190

R197

Q199

C195R195

R112

R198

Q533

C462C464

Q528

C533

C532

R566Q530

Q529

R475

R474

R473

R476

R196

R466

R465

Q534

C402

Q535

R477

X401

NO206

FB462

C498

R433Q402

C401

JR402

D408

JR103R571

IC402

IC401

Q401

R467

R468

Q532Q531

R570 R574

R562

R563 R565

R569

R573

JW122

R391

R492

R493

R397

CN404

R575

R579

Q539

Q540

R404

C543

1SS355

21P

3P

0.1

100

0.1

220

1S

S355

22k

0.1

1S

S355

1k

1SS355

0.1

10k

1SS355

22k

22006.3V

22p

15p

16MHz

10k

0

330k

10k

100

1k

100

100

100

100

100

10k 100

100

0.10.1

0.1

10k10k1SS355

0.0

22

0.0

22

100

10k10k10k 10k 10k

10k

10k

10k

10k

10k

100

22k

100k

150V

150V

DTC114EKA

68k

DTC114EKA

DTC114EKA

22k

2SC5938

2250V10k

4.7k

10k

DTA124EKA

10010V0.01

DTC114EKA

150V

150V

68kDTC114EKA

DTA124EKA

10k

10k

10k

10k

10k

100

100

DTC114EKA

1050V

DTA124EKA

100

32.768KHz

2P

10006.3V

10kDTC114EKA

1050V

0

10EDB40

01k

BD4929G

M30620MCN-A42FPU0

2SC1623

100

100

DTA124EKADTA124EKA

470 47k

5.6k

3.3k 10k

6.8k

470k

4.7

k

0

∗

10k

7P

470k

10k

DTC114EKA

DTA124EKA

100

1016V

A1

A2

A3

A4

A5

A6

A7

D1

D2

D3

D4

E3

E4

E6

E7

E8

E9

E10

E11

E12

E13

E14

F1

F2

51

52

53

54

55

56

57

58

59

60

82

83

84

85

86

87

88

89

90

91

61

61

42

43

44

45

46

47

48

49

A2

A5

A6

A7

SIRCS

SIRCS

GCRST

GCRST

BPM

BP

M

DSPL

DSPL

POWKEY

POWKEY

LED

LED

-VG

VF1

VF2

CLK

CLK

CLK

DATA

DATA

DATA

RLY

RLY

MUTE1

MUTE2

MU

TE

1

MU

TE

2

SYS-R

SY

S-R

M-REQ

M-R

EQ

MIC

MIC

50

A4

A9

ALOG

CLK2

DATA2

I-HOLD

PROTECT

S-MUTE

H-MUTE

FR-RY

REAR-RY

C-RY

CD

-PO

WE

R

∗

DISPLAY

POWER KEY

STBY LED

LED GND

LED+9V

SPEANA

SIRCS

I2C DATA

I2C CLK

-VG

-VG

GC RESET

D+4V

EVER+4V

STBY RLY

D-GND

VIDEO +9V

(2/5)

MO

DEL-I

N

AV

SS

VR

EF

AV

CC

A-S

HU

T

B-S

HU

T

B-H

ALF

DES

T-I

N PROTECT

ST-C

LK

ST-D

OU

T

ST-D

IN

ST-C

E

TU

NED

STER

EO

ST-M

UTE

I-H

OLD

BP

M-D

ET-L

O

MIC

DET

REQ

MP3

RESET

X-OUT

VSS

X-IN

VCC

NMI

SCOR

IIC-CLK

IIC-DATA

CD-DATA

CD-CLK

XRST

XC-IN

XC-OUT

SIRCS

SENS

AC-CUT

XLAT

BYTE

MP3 ACK

MP3 DATA OUT

MP3 DATA IN

XTCN

MP3RST

STBY RELAY

FAN CTRL

MP3 LP

MP3 CS

MP3 CLK

/SW RELAY

CD

-A-M

UTE

LIN

E M

UTE

DS

EN

S

TS

EN

S

SY

S R

ST

VM

UTE

VM

UTE2

MR

EQ

OC

-SW

1

CH

K-S

W

OC

-SW

2

TB

L-N

EG

TB

L-P

OS

LO

D-N

EG

LOD-POSREC

MU

TE

AM

S M

UTE

CD

-PO

WER

/DV

D P

OW

ER

DISPLAY-KEY

POWER-KEY

VCC

VSS

STK MUTE

A-PLAY

A-TRG

A-HALF

REC-A

B-PLAY

B-TRG

REC-B

TC-RELAY

BIAS

AMS-IN

AUDIO1-DATA

AUDIO1-CLK

AUDIO2-DATA

AUDIO2-CLK

VIDEO OUT

FR RELAY

REAR RELAY

GC RESET

HP DET

C-RELAY

CPM-CNT2

TC-MUTE

STBY LED

ANALOG_IN _MUTE

VIDEO OUT CONTROL

DETECT

AC CUT

(MX, AUS)

Q535,536

MUTING CONTROL

SWITCH

VOLTAGE DETECT

MASTER CONTROLLER

CNVSS

SWITCH

RESET

HP MUTE

SWITCH

MUTING

CONTROL

Q531,532

MUTING CONTROL

SWITCH

Q539,540

Q528-530

AMS MUTINGSWITCH

MUTING

CONTROL

Q533,534

AMS DETECT

Q190,198,199

∗ R493

1K

4.7K

(MX)

(E15, AUS)

(E15, MX, AUS)

(E15,SP, MY)

(E15,SP, MY)

∗ R393

0

330

1.5k

(SP, MY)

(E15)

(AUS)

4.7k (MX)

VF

VF

MIC DETECT

EVER 4V

D GND

D GND

A GND

BPM LOW

VIDEO MUTE2

VIDEO SW

SYS RESET

DGND

MUTE REQ

I2C-CLK

I2C-DATA

SW MUTE AC

CU

T M

AIN

(Page 65)

(Page 73)

(Page 43)

(Page 55)

(Page 56)

(Page 54)

(Page 49)

(Page 52)

Ver. 1.1

HCD-ZX10D

5454HCD-ZX10D

7-26. SCHEMATIC DIAGRAM – MAIN BOARD (3/5) –

R529

C524

C523 R524

R525 R530

R517C516

R516

C529

C527

R528R522

R521 R527

C520

C519

FB503

FB502

FB501

FB500

R518

C518 C522

C521C517R514

R519

R520

R511

C510 R513

R509

C508

IC519(1/2)

C503 R507

R505 C505 C506 C513 R515

C512

R512C509

R504

C507

R508 R510

C504 R506

IC519(2/2)

C511

C514

R503 C501 C502C500

R501

R500

R502

R526

R523 C525

C530

R558

R559 R561

R556R557

Q523 Q524

R554 R555

R560

C531

NO511

NO510

JW520

JR131

JR270

JR118

C528

C526

R280R278

R276

R277

R279

C259CN502

R281

J202

Q270

Q563

R221 R222 R225 R226 R229 R231

R224 R228 R234

R232R227R223

J701

C257

C515

Q202 Q203 Q204

1k

220p

220p 100k

100k 1k

2.2k1050V

2.2k

0.1

0.1

1k100k

100k 1k

220p

220p

0

0

0

0100

100p 330p

330p100p47k

1k

1k

560k

0.0047 1k

47k

0.0015

NJM4565M

0.033 1k

100k 0.01 10016V

2.250V 47k

2.250V

1k0.0047

100k

0.0015

47k 560k

0.033 1k

NJM4565M

100p

100p

1k 0.01 4716V

4716V

1k

330

1k

1k

1k 1050V

4.750V

1k

10k 10k

47k47k

2SC5938 2SC5938

10k 10k

1k

4.750V

3P

4P

0

0

0

0.1

1050V

1k1k

10k

10k

47k

0.17P

100k

1P

2SC5938

2SC3052

1k 47k 1k 47k 1k 47k

10k 10k 10k

10k10k10k

6P

1050V

1050V

2SC5938 2SC5938 2SC5938

B1

B2

B3

B5

B6

B7

D1

D2

D3

D4

G1

G2

H1

H2

4PIN

13PIN

62PIN

52PIN

LCH

RCH

MICIN

63PIN

3PIN

REAR-RY

C-RY

IC-1IC-2

IC-3

IC-4

CENTER

REAR-L

REAR-R

REAR-RY

A.GND

GM R-CH

GM L-CH

HP DETECT

MIC_GND

A+9V

CENTER GND

(3/5)

MIC

(CHASSIS)

SUBWOOFER OUT

MUTING

CENTER-RY

REAR GND

R

L

R

L

R

L

PHONO IN

VIDEO/SAT

IN

VIDEO/SAT

OUT

PHONO AMP

1

8 3

2

5

67

4+4.5V REGULATOR

MUTINGMUTING

MUTING MUTING MUTING

(Page 53)

(Page 55)

(Page 56)

(Page 61)

(Page 63)

(Page 63)

(Page 52)

HCD-ZX10D

5555HCD-ZX10D

7-27. SCHEMATIC DIAGRAM – MAIN BOARD (4/5) – • See page 75 for IC Block Diagrams.

C598C597

CN509

R302

C301

C303

C302

C305

R308 C304

R317

C307

C306

R303

R300

R301

C300

R314

R315

R304

R313

R312

R311

R307 R328

R318

C341C342

CN506

C595

C590C594

D501

IC510

R306

CN505

C538 R567 R572

Q538

R305

R316

C539

R576

Q554

IC516

IC513

Q552

Q509

C542C540 C541

D502

C599 C596

JW552

JW587

R590

R591

IC515IC514

R309

R310

Q870

JW526

R582

R583

D581

C583

C584

C592JR471

C585

C580

D580

R581

R580

FB580

IC517 IC518

CN508

NO581

NO580

FB582

FB583

FB582

FB583

FB585

FB584

C582

R577

C591

IC511

Q506

Q537

C536

C544

C545

Q590

D329

0.010.01

11P

1k

0.1

0.1

47

25V

0.1

33k 0.01

1k

0.1

47

25V

100k

100k

47k

0.01

10

10

75

100

100

100

15k 0

100

L30010µH

0.110006.3V

13P

0.1

470025V0.1

D3SBA20-4101

TA7809LS

56k

13P

150V 68k 15k

DTC114EKA

47k

100

150V

470k

DTC114EKA

PQ12RF21

TA7805LS

RT1P137P

DTC114EKA

0.10.1 220016V

D5SBA20

0.01 0.01

56k

1.8k

BA6956ANBA6956AN

1k

47k

2SC1623

47

820

RK36

4750V

0.1

680025V

0

33006.3V

4750V

RK36

820

47L580

100µHL581

100µH

SI-8050JF SI-8033JF

13P

6P

6P

0

0

0 0

10006.3V

10k

10010V

TA7809LS

DTC114EKA

DTA124EKA

0.1

0.1

0.1

FA1L3Z

1SS355

E3

E4

E6

E7

E8

E9

E10

E11

E12

E13

E14

G1

G2

I2

I3

I4

I5

I6

I7

A1

-VG

VF1

VF2

PROTECT

H-MUTE

CD-POWER47

48

49

50

S-MUTE

FR-RY

43

45

44

46

I-HOLD

42

FAN DET

L-IN

R-IN

HP MUTE

POWER GND

POWER GND

STK MUTE

FRONT RELAY

AC3

AC3

AC4

AC4

-VG

TSENS

DSENS

SENSOR LED

SGND

TM-

TM+

LM+

LM-

A+9V

M+12V

MGND

D+5V

D+3.3V

D+3.3V

DGND

DGND

VGND

V+5V

DGND

PROTECT

FAN ON

DGND

NC

DGND

(4/5)

+12V REGULATOR

+5V REGULATOR

OG

I

B+ SWITCH

B+ SWITCH

Q506,509

CD/DVD POWER

SELECT SWITCH

Q537,538

MUTING CONTROL

SWITCH

GOI

+9V REGULATOR

GOI

+9V REGULATOR

2 3

4

1

2 3

4

1

LOADING

MOTOR DRIVEMOTOR DRIVE

TABLE

LEVEL SHIFT

+3.3V REGULATOR+5V REGULATOR

ON/OFF

VOS

GND

SW OUT

VIN

ON/OFF

VOS

GND

SW OUT

VIN

OCSW2

OCSW1

CKSW1

AUDIO_GND

AUDIO_5V

VF

VF

AC CUT DETECT

-B(-VL)

-B(-VL)

A-GND

(AUS)

(E15, MX, SP, MY)

(E15, MX, SP, MY)

(AUS)

(AUS)

(AUS)

DETECT

VOLTAGE

OVER

UNREG-V

DBFB FEEDBACK

(E15,SP, MY)

(E15, MX, SP, MY)

(Page 50)

(Page 42)

(Page 58)

(Page 58)

(Page 53)

(Page 56)

(Page 54)

Ver. 1.1

HCD-ZX10D

5656HCD-ZX10D

7-28. SCHEMATIC DIAGRAM – MAIN BOARD (5/5) –

C587

Q553

C586CN513

R587

R588Q557

EPT501

JW5

30

CN503

M501

C251

Q293

Q292

R296 R297

IC501

R288

R289

R294 R290

C292R293

C293R291

R295

R292

R298

R274R271R268R265R262R254R237R233

R275R273R272R269R266R263R255R238R235

D554

R270R267R264R261R246R236R230

C224 C225 C234 C249 C252 C253 C254C255

R586

R585

C231

C242

R252

R253

C243

R243

R251R259R242

C227

C247C240

C229

C230

C228

R250R258R241

R249 R240C241

C246

C237

C238

C239

R239

R257R248

C233R245R247

C235

C236 C245

R260

R256R244

C244C232C226 C248

C213

C201

R217

C211

R218

C223

C222

R215

R207Q201

C204

R214

R206

C221

C220Q200

R200

R212

R213C210

C205

R210

R211

C209

C200

C219

R209

R205

R208 C214

R220

R216

R219

C208

R204

C207

C203

R202

C202

C206

R203

C212

C215

C216

C217

C218

R201

D553

Q555

Q291

Q290

Q212Q211Q210Q209Q208Q207Q206Q205

0.1

2SD2525

0.13P

100k

4.7k2SC1623

21P

22010V

DTC114EKA

DTA124EKA

68k 15k

M61530

10k

10k

47k 10k

4.750V1k

4.750V

10k

47k

1k

470k

1k1k1k1k1k1k1k1k

10k1k10k10k10k10k10k10k10k

UDZS-7.5B

2.2k2.2k2.2k2.2k2.2k2.2k2.2k

150V

150V

150V

150V

150V

150V

150V

150V

4.7k

4.7k

150V

220p

470

470

220p

47k

2.2k10k4.7k

0.001

1050V

0.001

10 50V

10 50V

0.001

2.2k10k4.7k

47k 47k10

50V

1050V

1050V

0.001

1050V

4.7k

10k2.2k

1050V47k47k

1050V

0.001 1050V

47k

47010k

220p220p0.001 1050V

0.22

10 50V

1k

0.1

2.2k

0.39

0.18

620

10k2SC1623

1050V

620

10k

0.39

0.182SC1623

47k

1M

010 50V

10 50V

0

1M

10 50V

10010V

100 10V

2.2k

2.2k

470 220p

2.2k

2.2k

10k

10 50V

47k

10 50V

10 50V

47k

10 50V

10 50V

47k

0.0022

0.0022

220p

0.001

0.001

47k

UDZS-6.8B

2SC1623

2SC5938

2SC5938

2SC59382SC59382SC59382SC59382SC59382SC59382SC59382SC5938

C1

C2

C3

C4

F1F2 H1

H2

I2

I3

I4

I5

I6

I7

DM

-L

DM

-R

DMR-OUT

ZIVA-FR

ZIV

A-F

R

LINK-L

ZIVA-SL

LINK-R

ZIV

A-S

R

ZIV

A-S

L

ZIVA-SR

ZIV

A-C

TR

ZIVA-CTR

ZIVA-LFE

ZIV

A-L

FE

ZIV

A-F

L

ZIVA-FL

FR

FL

DM-R

DM-L

DML-OUT

AL

OG

DATA2

CLK2

LFE-IN

SR-IN

SL-IN

C-IN

FR-IN

FL-IN

DM-R

DM-L

DM

-R

FL

-IN

FR

-IN

C-I

N

SL

-IN

SR

-IN

LFE

-IN

DM

-L

14PIN

51PIN

31PIN

IC-2

IC-3

IC-4

IC-1

FRONT-L

FRONT-R

DOWNMIX-L

DOWNMIX-R

ANALOG-IN-L

ANALOG-IN-R

A-GND

A-GND

A-GND

A-GND

A-GND

A-GND

CENTER

A-GND

SURROUND-L

A-GND

SURROUND-R

A-GND

SW(LFE)

(CHASSIS)

FAN-

FAN+

(FAN)

AUDIO_GND

AUDIO_5V

Q292,293

SWITCH

MUTING CONTROL

(5/5)

ELECTRICAL VOLUME

MUTING

MUTING

MUTINGMUTINGMUTINGMUTINGMUTINGMUTINGMUTINGMUTING

FAN MOTOR DRIVE

Q553,555,557

SWITCH

FEED BACK

SWITCH

FEED BACK

(Page 53) (Page 52) (Page 54)

(Page 55)

(Page 47)

Ver. 1.1

HCD-ZX10D

5757HCD-ZX10D

7-29. PRINTED WIRING BOARDS – FRONT AMP SECTION – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

NO603

NO607

NO609

NO604

JW697

JW60

1

JW60

2

JW60

3

JW60

4

JW60

5

JW60

6

JW60

7

JW60

8

JW610

JW611

JW612

JW61

3

JW614

JW61

5

JW61

6

JW61

7

JW61

8

JW61

9JW

620

JW62

1

JW62

2

JW62

3

JW62

4

JW62

5

JW62

6

JW62

7

JW628

JW63

0

JW63

1

JW63

2

JW63

4

JW63

6

JW63

7

JW63

8

JW639

JW640

JW641

JW642

JW643

JW644

JW645

JW646

JW64

8

JW64

9

JW65

0

JW65

1

JW65

2

JW653

JW654

JW655

JW656

JW657JW

658

JW65

9

JW66

0

JW66

1

JW66

4

JW66

5JW666

JW667

JW669

JW67

0

JW67

1

JW672

JW67

3

JW67

4

JW67

5

JW67

6

JW67

7

JW67

8JW

679

JW68

1

JW68

3

JW685

JW703

JW704

JW70

5

JW70

8

JW709

JW71

0

JW71

1

JW71

2

JW71

3

JW71

4

JW71

5

JW71

6

JW71

7

JW718

JW719

JW72

3

JW72

5

JW63

3

JW63

5

JW702

JW706

JW62

9

JW707

JW724JW727

JW726

JW68

7

JW696

JW72

1

JW72

2

JW60

0

JW609

JW728

JW701

JW700

CN601

CN602

C600

C650

R615

C602

C652

R616

C609

C610

Q664

R612

C663

C662

C657

C677

C679

C659EP605

C628

C608

Q606

C627

R622 R672

C637

C636

C634

C635

R636

R637

C655

RY646

C648

C649

EP608

IC600

R618R668

L680

L682

L684

L686

L688

C658

C676

C656

CN600

D656

D658

JW720

C678

R613

R614

JW66

2

C616

C617

C666C616

R680

R646

JW68

9

JW69

9

R682

R684

R686

R688

JW68

0

JW682

JW68

4

JW68

6

JW68

8

CN606

JW69

8

JW72

9

JW730

JW647

JW668

JW731

JW732

R600

C601

R650

R617

C651

D664

Q640

R676

R677

R656

R657

R658

R659

R678

R679

Q618 Q668

R619

Q641

D670D620

D609

Q610

C605

R611R610

R609

R608

Q604

R606 R607

R604

R605

R662

IC627

C629

D627 R663

R664

Q634

R634

R635

R638R639

R640R641

R642

R643

Q628 Q629Q630

R629

R630

R631

R632

R633

R624

R674

D624

R623R673

R654

R655

D654

D655

Q648

R649

R660

R661

D660D661

D646

Q644

Q647R647

R644

Q635

R691

C691 C6

95

R692

R693

R601R602

R603

R651 R6

52

R653

C604

C654

D611D612

R620

R621

R670 R671

R628

R625

R626

C690

C694

C692

C693

R694

R665

R698

R699

R669

JR647

R690

TH630CN605

E

E

E

EEE

221

1

13

31

E

E

E

E

E

E

EE

3 1

1

4

4 6

E

POWER BOARD

1-861-387-

11

(12)

– + – + – + – +– +

FRONT R

(CHASSIS)

SURR R FRONT L

SPEAKERTM608

SURR LCENTER

(AUS)

(AUS)

(AUS)

(AUS)

(AUS)

-1

1

10

1

2

-2

SURROUNDBOARDNO700

(Page 60)

V

B

E

1

6

1

1

7

4

C

TRANS BOARDCN1113

(Page 72)

TTRANS BOARDCN1112

(Page 72)

USURROUND BOARDNO701

(Page 60)

R

GAME/HP BOARDCN803

(Page 62)

S

MAINBOARDCN505

(Page 51)

Q

1

13

MAINBOARDCN506

(Page 51)

P

(CHASSIS)

1 5

SENSOR BOARD

1-861-388-11

(12)

1 2

A

B

C

D

E

F

G

H

I

J

1 2 3 4 5 6 7 8 9 10 11

D609 G-4D611 E-7D612 E-6D620 G-5D624 C-6D627 H-4D646 D-9D654 D-8D655 D-8D656 H-9D658 H-5D660 G-10D661 G-10D664 H-10D670 G-5

IC600 E-6IC627 H-4

Q604 H-4Q606 H-4Q610 G-5Q618 G-5Q628 D-6Q629 D-6Q630 D-6Q634 B-5Q635 B-5Q640 B-5Q641 B-5Q644 E-9Q647 E-9Q648 G-10Q664 H-10Q668 G-5

• SemiconductorLocation

Ref. No. Location

HCD-ZX10D

5858HCD-ZX10D

7-30. SCHEMATIC DIAGRAM – FRONT AMP SECTION (1/2) –

C652

D646

R604

R629

Q634

C605

R619

R622

Q618R615

R616

R612

C602

Q610

C608

R611

C610

R692

R617

R699

C609

D620

R610

R609

C628C629 C627

D627

C637

R640

R641

C636R638

R634

R693

C634

R635C635

R672

Q668

D670

R669

R623

R674

R624

R673

R639

Q635

Q640

Q641

R643

R642

NO609

C601

C651

R600

C600

Q630

Q629

R632R633

R631R630

R663R662

C662 D664 C663

R664

C655

CN602

NO603

Q647

Q644

R644

R654 R655

D655D654

Q648

C648C649

R647

R650

C650

R607

R690

R606 R608 R691 R698

Q606

Q604

R605

D609

CN605 NO604

TH630

CN601

JW662

R628

Q664

Q628

D624R626

IC627

CN600

EP605

JW647

R649

R625

R665

R646

JR647

R636

R637

RY646

IC600

R618

D61

2

D611

R613R614

R620

R621

C617

C616

R671

R670

C667

C666

R668

R653

R652

C654R651

R602

R603

C604

R601

R69410010V

1SS355TE

10k

100

DTA124EKA

0.01

1k

101/2W

2SC3906K100

1

100

10010V

2SC3906K

2250V

33k

22100V

100k

100k

100k

22100V

1S

S3

55TE

68k

68k

10016V0.1 2.2

50V

1SS355TE

4.7100V

10k

10k

4.7100V

100k

2.2k

2.2k

10025V

10k10025V

101/2W

2SC3906K

1SS355TE

1k

56k

22k

22k

68k

100k

DTC114EKA

2SC3661

2SC3661

56

56

3P

0.0

022

0.0

022

1k

4.750V

2SC2412K-T-146-R

2SC2412K-T-146-R

560k47k

100k100k

8.2k8.2k

1050V UDZS-TE17-33B 100

50V

1k

1050V

13P

7P

2SC2412K-T-146-R

2SC2412K-T-146-R

2.2k

47k 47k

1SS355TE1SS355TE

2SC2412K-T-146-R

10010V

1050V

1.5k

1k

4.750V

2.2k

47k

47k 100k 100k 100k

2SA1207

2SC2412K-T-146-R

10k

1SS355TE

2P 2P

13P

33k

B1565E

2SC2412K-T-146-R

1SS355TE100k

RT8H015C-TH12-1

5P

12k

1.5k

1.5k

1001W

0

6802W

6802W

STK412-230

0.225W

UD

ZS

TE-1

8B

UD

ZS

TE-1

8B

1k1W

1k1W

15k

150k

0.0

68

0.0

68

150k

15k

0.0

68

0.0

68

0.225W

47k

220

100p

47k

220

47k

100p

47k

68k

Z1

Z2

Z3

Z4

Z6

Z7

Z8

Z9

VF1

VF2

VF1

VF2

AC1

AC2

AC3

AC4

AC1

AC2

AC3

AC4

R-IN

A-GND

L-IN

DBFB FEEDBACK

FAN DET

FRONT RELAY

AC3

AC4

AC4

VF

VF

AC3

PROTECT

DC DETECT

OVERLOAD DETECT

VP

HP MUTE

POWER GND

POWER GND

-B(-VL)

STK MUTE

AC CUT DETECT

HP-R

HP-L

AC3

AC3

AC4

AC4

DGND

-VG

VF

VF

A+9V

UNREG-V

-B(-VL)

STK MUTE

NC

FAN ON

(CHASSIS)

(1/2)

HP-GND

SWITCH

FAN MOTOR

Q628,630

THERMAL

DETECT

OVER CURRENT

PROTECTOR

UNREG-V

PROTECT

DETECT

OVER LOAD

SWITCH

PROTECT

RELAY

DRIVE

-1

-2

MUTING

MUTING

MUTING

Q634,635

CONTROL

SWITCH

POWER AMP

DETECT

OVER LOAD

Q618,668

Q604,606,610

STANDBY

SWITCH

-33V REGULATOR

(Page 61)

(Page 55)

(Page 63)

(Page 59)

(Page 55)

(Page 73)

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

HCD-ZX10D

5959HCD-ZX10D

7-31. SCHEMATIC DIAGRAM – FRONT AMP SECTION (2/2) –

C659

C679

NO607

C691

C695

R659R658C657

C677 R678 R679

R657R656

R676 R677

D660 D661

CN606

JW699

JW720

JW689

JW726

JW688

JW698

JW684

JW680

JW682

JW686

EP608

C694

C693

C692

C690

TM608

R686

L686

L688

R688

R684

L684

R680

L680

L682

R682

C678

C658

R661R660

C656

C676

D656 D658

0.1

0.1

6P

0.0

1

0.0

1

220k220k0.1100V

0.1100V 220k 220k

220k220k

220k 220k

1SS355TE 1SS355TE

10P

0.0

1

0.0

1

0.0

1

0.1

10

10

10

10

10

330063V

330063V

12k12k

3300100V

3300100V

RBV-2506 RBV-2506

Z1

Z2

Z3

Z4

Z6

Z7

Z8

Z9

GND

GND

+VL

-VL

+VH

-VH

SURR GND

VH(AC)

VH(AC)

VL(AC)

VL(AC)

REAR GND

C-GND

CENTER

REAR L-CH

REAR R-CH

(CHASSIS)

(2/2)

SURR L

FRONT L

CENTER

SURR R

FRONT R

SPEAKER

(AUS)

(AUS)

(AUS)

2

3

41

2

3

41

(Page 58)

(Page 73)

(Page 61)

HCD-ZX10D

6060HCD-ZX10D

7-32. PRINTED WIRING BOARD – SURROUND BOARD – • See page 35 for Circuit Boards Location.

NO702

C740

C770C771

R765

JW70

0

JW702

JW703JW704

JW707

JW708

JW710

JW711

JW715

JW716

JW717

JW718

JW71

9

JW721

JW722

JW724JW725

JW727

JW729

JW731

JW732

JW733

JW735

JW736

JW737

JW739

JW740

JW742

JW74

7

JW734

NO700

JW74

1

JW756

JW758

JW759

JW76

0

JW76

1

R796

R730R780

R770

C781

C780

R797

RY761

R775

R764

IC701

JW791

C721

NO701

C702

C700

C752

EP790

R793

R785

RY760

R794

R795

C796

C795

Q721

C742

JW70

6

JW70

5

R735

C730

C731

JW709

JW714

JW712

JW728

C750

JW762

JW73

8

JW74

4

JW751

JW752

JW74

6

JW754

JW745

JW755

JW749

JW748

JW753

JW743

JW750

C741

R712C743

R751

R701

D790

R740

R742

R752

C703

R741

R702

C792

R710

R711

C753D791

Q730

Q780

Q770

R783

R782

R732

R733

R771

R772

R773

R774

D770

D762

Q763

Q764

R768

R790

C701

R750

C791

R700

C751

R731

Q720

R720

R721

R723

R725

R781

D780

R734

D730

D760

R784

D761

Q762

R766

R788

Q765

Q722

R722

R724

R726

R727

D720R7

29

R736

R728

R737

R798

R792

R799

E

E

E

E

E

17

E

E

E

E

E

1-861-383-

11

(14)

SURROUND BOARD

-1

-2

1

15

10

POWER BOARDCN606

(Page 57)V

POWER BOARDCN600

(Page 57)R

MAIN BOARDCN502

(Page 51)N

(CHASSIS)

-1

-2

A

B

C

D

E

1 2 3 4 5 6 7

D720 B-6D730 D-6D760 D-3D761 D-4D762 D-3D770 B-2D780 C-3D790 A-5D791 A-5

IC701 A-4

Q720 C-6Q721 C-6Q722 B-6Q730 A-6Q762 C-3Q763 C-3Q764 C-3Q765 C-3Q770 B-2Q780 C-4

• SemiconductorLocation

Ref. No. Location

HCD-ZX10D

6161HCD-ZX10D

7-33. SCHEMATIC DIAGRAM – SURROUND BOARD –

R710

R735

R751

C751

R701

C701

R711

R799

R798

R792

Q722

R727 C721

C795 C796

R795

R794

R793

C752

C702

C750

C791

R750

R726R736

R737 R724 R729

R712

R721R720

Q720

R722

R728

Q721

R723

R741C741

R781

R784

R734

Q765

Q762

R785

NO701

C700R700

D760

NO700

IC701

D791

D790

R730

R796 R797

R732

D780

D730

R782

R731

R733

C731

C730

JW791

R780

R783

Q780

Q730

C780

C781

R774

R768

R790

D762

R764

D761

RY761

RY760

R765

R788 R766

Q764

Q763

R773

R772

R771

Q770

R775

C771

C770

R770

D770

R725

D720

C703

R702

R752

C753

C743

C792 R742

C742

R740C740

NO702

EP790

101/2W

0.0

022

0.0

022

100k

100k

100k

2SC3906K

33k 22 50V

22100V

22100V

100

100

1

10010V

10010V

4.7

50V

0.0

1

1k

68k68k

100k 100k 100k

10k10k

2SC2412

47k

47k

2SA1207

2.2k

1k

68k

56k

2SC2412

2SC2412

101/2W

5P

4.750V 1k

1SS355TE-17

10P

STK413-430

UDZ-TE-17-18B

UD

Z-T

E-1

7-1

8B

0.225W

1k1W

1k1W

15k

1SS355TE

1S

S355TE

15k

1k

150k

0.068

0.068

0.225W

150k

2SC3906K

2SC3906K

0.0

68

0.0

68

47k

2.2k

1.5k

1SS355TE

1001W

1SS355TE

1001W

1.5k 2.2k

2SC2412

2SC2412

150k

15k

1k

2SC3906K

101/2W

0.068

0.068

0.225W

1SS355TE

68k

1SS355TE

100p

220

220

100p

100p

0.01 220

10010V

1k4.750V

7P

47k

47k

47k

47k

47k

47k0.0022

REAR GND

CENTER GND

+VL

-VL

+VH

-VH

SURR GND

REAR GND

C-GND

CENTER

REAR L-CH

REAR R-CH

PROTECT

DC DETECT

OVERLOAD DETECT

UNREG-V

STK MUTE

(CHASSIS)

POWER AMP

DETECT

OVER LOAD

DETECT

OVER LOAD

-1

-2

-1

-2

SWITCH

PROTECT

RELAY

DRIVE

RELAY

DRIVE

SWITCH

PROTECT

DETECT

OVER LOAD

STANDBY

SWITCH

Q720-722

CENTER

CENTER-RY

REAR-R

REAR-L

REAR-RY

(Page 54)

(Page 59)

(Page 58)

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

HCD-ZX10D

6262HCD-ZX10D

7-34. PRINTED WIRING BOARDS – PANEL SECTION (1/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

C819RV802

C828

C831

C832

C825

C822

C821

JW822

C826

C833

C827

C801

C805

C802

C807

C812

C814

RV801

J801

J802

C809

JW827

JW83

0

JW823

JW821

JW91

9

JW820 CN920

EPT808

EPT801

CN930

JW82

8

IC851D801

R815

R818

C823

C829

C830

C820

R816

R821

R822

R823

R824

R817

R819

R820

C824

R825

C834

C811

R800

R811

R804

R802

R803

R813

R812

C815

R801

R810

R805

R806

R808

C804

C806

R809

R814

C810

C813

C817

IC850

R1344

C808

C818R807

CN802

J851

CN803

EPT804

CN801

JW811

EPT803

JW810

JW81

2

C840

C841

C842

R826

R827

R828

R829

R830

C843

1

1

12

3

4

8

5

1-861-391-

11

(13)

MIC BOARD

16

9

1

8

MAIN BOARDNO511

(Page 51)

M

VIDEO BOARDCN1201

(Page 48)

H

PANEL BOARDNO931

(Page 64)W(CHASSIS)

MIC 1

MIC LEVEL

MIC 2

ECHO LEVEL

(CHASSIS)

1-861-386-

11

(14)

GAME/HP BOARD

PHONES

VIDEO

AUDIO

L

R

GAMEINPUT

J850

1

1

4

2

(CHASSIS)

MAIN BOARDNO510

(Page 51)

L

3

1POWER BOARDNO609

(Page 57)

S

(CHASSIS)

A

B

C

D

1 2 3 4 5 6 7 8

Ver. 1.1

HCD-ZX10D

6363HCD-ZX10D

7-35. SCHEMATIC DIAGRAM – PANEL SECTION (1/5) – • See page 75 for IC Block Diagrams.

R807

C818

C817R814

C81

3 R812

C811

R808

C810 R809

C812

C807R806

C808

C804

R805

R804C802

R803

R802 C801

C805

R801R800

CN920

C814R813

C815R811

IC850(2/2)

IC850(1/2)C809

CN802

CN801

J850

R828

R827

CN803

C840

R830

R829

R826

EPT803

EPT804C843

C841

JW811

JW810

C842

JW812J851

J801

J802

EPT801

EPT808

RV801

CN930

C833

R825C826

R820R819

R817

R815

C819

R1344

R816

R818

C830

R823

C834

R824

C827

C825C822C820

R8

22

R821 C832

C829

C828 C831

C823

C824C821

RV802

IC851

C806

R810

D8

01

100

0.1

0.0110k

0.0

01

1k

47p

47k

470p 1k

150V

2.250V10k

0.1

150p

150k

1002.250V

10k

10k 22016V

1050V

100k0

3P

2.250V 1k

0.0110k

NJM4565M

NJM4565M2.250V

2P

4P

3P

100k

100k

3P

0.1

1k

1k

100

0.1

0.1

0.1

50k

2P

0.15

47k0.068

22k22k

22k

15k

2.250V

330

330

120k

0.001

22k

0.022

15k

0.068

4710V

4710V0.1

22

k

22k 150V

0.0068

0.4750V

0.4750V

0.001

0.0068150V

50k

M65850FP

47p

100k

UD

ZS

-TE-1

7-5

.1B

MIC_GND

A+9V

MIC DETECT

MIC_GND

GN

D

CC2

CC1

OP1

IN

OP1

OU

T

LPF1

OU

T

LPF1

INNC

OP2

OU

T

VCC

CLO

CK

REF

OP2

IN

LPF2

IN

LPF2

OU

T

NC

(CHASSIS)

(CHASSIS)

A.GND

HP DETECT

(CHASSIS)

(CHASSIS)

GM L-CH

GM R-CH

GM-SIG

GM-GND

HP-R

HP-GND

HP-L

PHONES

R

L

AUDIO

VIDEO

GAME

INPUT

MIC 1

13

2

4

8

76

5MIC LEVEL

MIC AMP

MIC

ECHO LEVEL

DIGITAL ECHO

MIC 2

(Page 54)

(Page 65)

(Page 49)

(Page 54)

(Page 58)

Ver. 1.1

HCD-ZX10D

6464HCD-ZX10D

7-36. PRINTED WIRING BOARD – PANEL SECTION (2/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

JW90

5

JW94

1

JW94

2

JW943

JW944

JW94

5

JW94

6

JW94

7

JW94

8

JW949

JW951

JW95

2

JW95

3

JW95

4

JW95

5

JW95

8

JW96

2

JW96

3

JW96

6

JW96

7JW

969

JW97

0

JW97

1

JW97

2

JW97

3

JW97

4

JW97

5

JW97

6

JW97

7

JW97

8

JW97

9

JW98

0

JW98

1

JW98

2

JW98

3

JW98

4

JW98

5

JW98

6

JW98

7

JW98

8

JW98

9

JW99

0

JW99

1

JW99

2

JW99

3

JW99

4

JW99

5

JW99

6

JW99

7

JW99

8

JW999

JW83

1

JW83

2JW83

3

JW83

4

JW83

5

JW83

6

JW83

7

JW83

8JW

839

JW84

1

JW84

2

JW84

3

JW84

5

JW84

6

JW84

8

JW84

9

JW850

JW851JW852

JW853

JW854

JW855

JW856

JW857

JW858

JW85

9

JW861

JW862

JW87

0

JW87

4

JW87

5

JW87

6

JW87

7

JW87

8

JW87

9

JW88

1

JW886JW887

JW888

JW889

JW890

JW891

JW90

0C9

05

R902

JW90

1JW

902

JW90

3

JW10

00

JW10

01JW

1002

JW10

03

JW1004JW1005

JW1006JW1007

JW10

08

S903 S928

S902S901

S900

S921

S922S923

S925S924

S926

S927

IC902

CN906

NO917

D906

NO910

NO909

C944

X601

C900

C920

JW1014

JW89

6

JW10

16JW

897

JW89

8

JW895

C960

JW915

JW968

JW950

JW892

JW86

8

JW88

4

CN908

C961

JW96

1

JW96

4

JW95

9

JW96

0JW95

6

JW95

7

JW93

9

JW916

JW917

JW918

FL901

JW84

4

JW885

JW10

12

JW10

13

JW10

09

JW1011

JW1010

CN913

C922

JW84

0

JW893JW860

JW86

3

JW86

4

JW86

5

JW86

6

JW86

7

JW88

0

JW84

7

C918

C973

NO931

JW82

4

C927

C926C924

C925

C928

C929

C930

C931

C932

C933

C934

C935

C936

C937

C938

C939

C940

C941C942

R940

D905

Q906

R956

R957

R918

R984

R985

R986

R987

R988

R989

Q901

Q902

C923

R942

R922

C917C919

FB901

D901D900 D902

R901C904

R900

C903

C910

Q903

Q908

R903R904

R905

R906

R907

R908

R909

R910

R959R983

R911

R912R913

R914

R915

C916

R916

R917 R919

D903

R899

R898

R997

R998Q904

R993

R994

Q905

R941

C921

R944

R938

R939

R990

R958

C945C947

C950

C952 R948

C954C956

R951

C959

C958R954

R945

C951

R953

C957

R952

R950

C953

R949

R947

C949

C946

C948

R946

C955

R999

IC903

R1350

R135

2

R1351

JR921

D927

D904

JR918JR916

FB931

IC901

JW89

9

E

E

1 10

20 11

EEEE

E

PANEL BOARD

1-861-397-

11

(13)

POWER SWBOARDNO912

(Page 66)

X

TC-ABOARDCN915

(Page 68)

Z

JOGBOARDNO922

(Page 68)

Y

DISPLAYSLEEP

SET SELECTCLOCK TIMER

ILLUMINATION

3

4

1

1

1

1

12

5

7

MIC BOARDCN930

(Page 62)WVOL BOARD

NO924(Page 66)

AAMAIN BOARDCN507

(Page 51)JTC-B BOARD

CN916(Page 70)

BB

70

FLUORESCENT INDICATOR TUBE 63

62

9

8

1

100

151

50

31 30

80 81

1

9

S900 – 903,S921 – 928

TUNER/BAND

TUNING

MEMORY

FM MODE

TUNING MODE

+ –

D906, S921

TUNERENTER

A

B

C

D

E

F

1 2 3 4 5 6 7 8 9 10

D900 B-4D901 B-3D902 B-4D903 B-3D904 D-4D905 A-3D906 A-2D927 D-4

IC901 C-5

• Semiconductor Location

Ref. No. Location Ref. No. Location

IC902 C-9IC903 D-7

Q901 C-8Q902 B-8Q903 E-3Q904 E-2Q905 E-3Q906 E-2Q908 B-1

Ver. 1.1

HCD-ZX10D

6565HCD-ZX10D

7-37. SCHEMATIC DIAGRAM – PANEL SECTION (2/5) – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams. • See page 79 for IC Pin Function Description.

R986 R987R984 R989R988R985

NO910

D903

D901

D900

D902

C900 R938 R939

C904

C903

R901 R900

FL901

C944

C922

X601

C917

R922

R9

10

R9

09

R9

08

R9

07

R9

06

R9

05

R902C905

C923 C910

R9

03

R9

04

R916 R918R915

R919

R917

C916

R9

13

R9

11

R912 R914R959

R957 R958R956

R994

Q903

R998

Q906

Q904R983

R942

D927

D904

R990

C918 C919 C973

R944

C920

R941

D905

R1

35

0

R9

40

CN906

NO917

Q908

NO909

CN913

IC901

Q902

Q901

CN908

S900 S903S901 S902

JR921

Q905

R993

R1351

R1352

JW905

C949C961

C951 C957C955

R9

53

R9

47

R9

49

R9

50

R9

52

C9

48

C9

46

C9

45

C9

47

R948 R951 R954

R999

C9

59

C9

58

C9

56

C9

54

C9

52

C9

50

JR916

C953

C9

24

C9

25

C9

26

C9

27

C9

28

C9

29

C9

30

C9

31

C9

32

C9

33

C9

34

C9

35

C9

36

C9

37

C9

38

C9

39

C9

40

C9

42

C9

41

NO931

FB931

JW915

IC903

IC902

FB901

C9

21

FB901

R898R899

D906

S922S921 S923 S924 S925 S926 S927 S928

C960

R9

46

R9

45

R997

JR918

FB9

31

1.5k 1.5k680 3.3k2.2k1k

4P

1SS355

1SS355

1SS355

1SS355

4.750V 100k 100k

0.1

0.1

10k 10k

1050V

1050V

4MHz

0.01

1M

15

k

15

k

15

k

15

k

15

k

15

k

10k0.1

0.01 0.01

10

0

10

0

1k 1k100

10k

10k

0.1

00

10k 10k470

1k 6801.5k

1k

DTC114EKA-T146

1k

2SB1132-T100-QR

2SB1132-T100-QR470

100

RR263M-400FTR

RR263M-400FTR

470

4704V 0.01 1000

6.3V

47

4710V

100

UDZS-TE-17-5.1B

22

k

22

k

21P

9P

DTC114EKA-T146

7P

15P

MB90M407PF-G-142-BNDE1

DTC143TKA-T146

DTC143TKA-T146

5P

0

DTC114EKA-T146

470

1k

4.7k

14.750V 1 11

1k

1k

1k

1k

1k

47

0p

47

0p

1 1

6.8k 5.6k 10k

0

0.0

47

0.0

47

0.0

22

0.0

22

0.0

04

7

0.0

04

7

0

1

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

33

0p

2P

0

NJM2760

RPM7240-H4

0

0.0

01

680680

SLR-325MCT31

150V

68

k

47

k

470

0

24

25

26

27

28

29

30

32

33

34

35

36

37

38

39

40

41

43

57

56

60

61

16

14

13

12

10 9 7 6 5 4 3 2

22

21

20

19

18

55 71

72

73

74

70

65

66

67

68

69

64

59

58

52

53

54

86

87

88

89

90

91

92

93

94

95

96

97

98

99

10031

17

15 8

45

46

79

80

77

80

79

767

5

86

90

93

94

95

96

97

98

99

100

1234 92

87

1

44

5678910

12

13

14

15

17

18

19

20

21

22

24

25

26

27

28

29

30

31

32

33

34

35

36

38

39

40

41

43

37

16

91

58

89

47

75

76

44

45

64

68

67

66

52

53

54

55

56

57

46

47

69

65

88

59

KEY-P

KEY-P

LED-S

LED-S

60

61

77

73

72

71

70

74

VCC-CPU

VSS-CPU

AV

SS

AV

CC

MD

2

VSS-IO

VKK

MD0

VS

S-I

O

VD

D-F

IP

RE

SE

T

KE

Y 0

KE

Y 1

KE

Y 2

XIN

XOUT

KE

Y 3

KE

Y 4

VOL AVO

L B

D GND

VF

VF

SPEANA

SIRCS

I2C

-DA

T

I2C

-CL

K

AL

L B

AN

D

SO

FT

TE

ST

KE

Y 5

BP

F1

-F0

2

BP

F2

-F0

3

BP

F3

-F0

4

I2C CLK

SEG-25

SEG-24

SE

G-2

3

SE

G-2

2

SE

G-2

1

SE

G-2

0

SE

G-1

9

SE

G-1

8

SE

G-1

7

SE

G-1

6

SE

G-1

5

SE

G-1

4

SE

G-1

3

SE

G-1

2

SE

G-1

1

SE

G-1

0

SE

G-9

SE

G-8

SE

G-7

SE

G-6

SE

G-5

SE

G-4

SE

G-3

SE

G-2

SE

G-1

D GND

DISPLAY

I2C DATA

BP

F1

-F0

1

VC

CG

ND

LE

D S

EL

EC

T

A GND

LED GND

LED+9V

LED GND

VL +9V

VH +9V

JO

G A

JO

G B

VO

L 1

,2

VO

L 3

,4

VO

L 5

,6

VO

L 7

,8

VO

L 9

,10

G17

G18

G19

G16

G15

G14

G13

G12

G11

G10

G9

G8

G7

G6

G5

G4

G3

G2

G1

SEG-26

SEG-27

SEG-28

SEG-29

SEG-30

SEG-31

SEG-32

SEG-33

SEG-34

SEG-35

SEG-36

TAPE A LED

VO

L 1

1,

TU

NE

R B

AN

D

TA

PE

B L

ED

TAPE A LED

GC RESET

EVER 4V

D+4V

VG

VG

TAPE B LED

GAME , REC LED

NO USE

NC

LED STBY

KEY POWER

D GND

EVER 4V

VOL A

VOL B

GC DGND

LED GND

VOL 11 LED

VOL 9, 10 LED

VOL 7,8 LED

VOL 5, 6 LED

VOL 3,4 LED

VOL 1, 2 LED

JOG A

JOG B

DGND

SPK MODE LED

CD LED

+VL 9V

+VH 9V

SPK MODE LED

KEY0

CD LED

VH +9V

VL +9V

D GND

KEY 4

GAME,REC LED

KEY2

KEY3

KEY TC-B

KEY TC-B

KEY5

+VL 9V

MIC DETECT

BPM LOW

LED GND

LED GND

FLUORESCENT INDICATOR TUBE

BP

F4

IN2

BP

F4

IN1

BP

F3

IN2

BP

F3

IN1

BP

F2

IN2

BP

F2

IN1

BU

F1

OU

T

IN2

IN1

BP

F4

OU

T

BP

F3

OU

T

BP

F2

OU

T

BP

F1

OU

T

RE

CO

UT

BP

F1

IN2

BP

F1

IN1

BU

F2

OU

T

DISPLAY CONTROLLER

GRID DRIVE

GRID DRIVE

ILLUMINATION

SET SELECT

CLOCK TIMER

SLEEPB+ SWITCH

LED POWER

SELECT SWITCH

LED POWER

SELECT SWITCH

B+ SWITCH

LED DRIVE

POWER KEY

STBY LED

MIC DETECT

MIC_GND

(E15, MX, SP, MY)

(AUS)

FILTER

BAND-PASS

REMOTE CONTROL

RECEIVER

(AUS)

(E15, MX, SP, MY)

TUNER/BAND

TUNER/BAND +-

TUNING

TUNER

ENTER

MEMORY FM MODE TUNING MODE DISPLAY

MD1

(Page 67)

(Page 69)

(Page 69)

(Page 67)

(Page 63)

(Page 53)

(Page 71)

Ver. 1.1

HCD-ZX10D

6666HCD-ZX10D

7-38. PRINTED WIRING BOARDS – PANEL SECTION (3/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

S920

S912

JW92

1

JW92

2

JW92

4

JW92

8

JW94

0

EPT927S975

NO924

S913

D913

D914

D915

D916

D917 D907

D909

D908

D910

D911

D912

S914

S918

S915S919

S916

S917

S911

S910

S908

S907

S906

S909S905

S904

JW92

5

JW92

6

JW929

JW92

7

JW91

3

JW912

JW92

3

JW90

8

CN928

JW909

JW91

4

JW829

C969

C971

R960

Q912

R1329

C968 C967

JR913

JR91

2

JR910

JR909

R133

7R1

336

R133

5R1

331

R133

0R1

327

R132

4R1

323

R1322

R132

0

R131

7R1

316

R1315

R131

3

R1310R1309

R1308

R1306

R1303

R1302

R1301

R1300

Q915

Q914

Q913

JR91

1

Q911R976

R975R974

R961

R962

R963

R964

R965

R966

R967

R968

R969

R970

R971

R972

R973

S970

NO929

R978

R982

R979R980

R981

NO912

D920

S929

R1338

R1342 R1341

Q900

E E E E

13

ROTARYENCODER

E

VOL BOARD

1-861-394-

11

(13)

CURSOR BOARD

1-863-006-

11

(14)

E

1-861-396-

11

(13)

POWER SW BOARD

SALSA

POP

REGGAE

SAMBA

TANGO

P FILE

X-GROOVE

SOUNDFIELD

JAZZ

ROCK

GAME

DANCE

MOVIE

DVD TOPMENU

DVDMENU

AMPMENU

EFFECTON/OFF

S904 – 920, 929

VOLUMELEVEL 4

VOLUMELEVEL 3

VOLUMELEVEL 2

VOLUMELEVEL 1

VOLUMELEVEL 5

VOLUMELEVEL 6

VOLUMELEVEL 7

VOLUMELEVEL 8

VOLUMELEVEL 9

VOLUMELEVEL 10

VOLUMELEVEL 11

(CHASSIS)

VOLUME

15

1

12

PANEL BOARDCN913

(Page 64)

AA

ENTER

1

13

64

2

(STANDBY)

1

14

PANEL BOARDNO910

(Page 64)

X

A

B

C

D

E

F

1 2 3 4 5 6 7 8

D907 D-6D908 C-6D909 C-6D910 B-6D911 B-6D912 A-5D913 B-4D914 B-4D915 C-4D916 C-4D917 D-4D920 E-3

Q900 F-3Q911 B-6Q912 B-5Q913 B-5Q914 B-5Q915 B-5

• SemiconductorLocation

Ref. No. Location

Ver. 1.1

HCD-ZX10D

6767HCD-ZX10D

7-39. SCHEMATIC DIAGRAM – PANEL SECTION (3/5) –

C971

C969

R969

R970

R971

R972

R973

R974

R975

R976

S919

S918

S917

S916

S915

S914

S913

R1

33

6

R1

33

5

R1

33

7

R1

33

1

R1

33

0

R1

32

7

R1

32

4

R1

32

3

R1

32

0

R1

31

7

R1

31

6

R1

31

3

R1

31

0

R1

30

9

R1

30

6

R1

30

3

R1

30

2

R1

30

0

Q915Q914Q913Q912

R1301 R1308 R1315 R1322 R1329

C968

C967

S907

S908

S909

S910

S911

R960

R961

R962

R963

R964

R965

R966

R967

R968

CN928

NO924

NO929

R978 R979 R980 R981 R982

S970

Q900

NO912

R1341 R1342R1338

D920

S929

EPT927

S920

S975

JR913JR912JR911JR910JR909

Q911

D907 D917D915D913D911D909

D908 D910 D912 D914 D916

S904

S905

S906

S912

0.1

0.1

470

680

1k

1.5k

1.5k

2.2k

3.3k

4.7k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

1k

DTC114EKA-T146DTC114EKA-T146DTC114EKA-T146DTC114EKA-T146

100 100 100 100 100

0.1

0.1

6.8k

4.7k

3.3k

2.2k

1.5k

1.5k

1k

680

470

2P

15P

2P

10k 15k 22k 33k 68k

DTC114EKA-T146

4P

100 470680

SLR-325VCT31

00000

DTC114EKA-T146

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

SELS5823C-TP15

VOL A

VOL B

GC DGND

LED GND

VOL 11 LED

VOL 9, 10 LED

VOL 7,8 LED

VOL 5, 6 LED

VOL 3,4 LED

VOL 1, 2 LED

KEY TC-B

KEY3

KEY2CURSOR KEY

CURSOR KEY

DGND

DGND

(CHASSIS)

ENTER LED STBY

KEY POWER

D GND

EVER 4V

(STANDBY)

LED DRIVE

VH +9V

VL +9V

ROCK

JAZZ

DANCE

MOVIE

GAME

DVD TOP

MENU

DVD

MENU

AMP

MENU

ROTARY ENCODER

VOLUME

LED DRIVE LED DRIVE LED DRIVE LED DRIVE LED DRIVE

VOLUME

LEVEL 1

VOLUME VOLUME VOLUME VOLUME

VOLUME VOLUME VOLUME VOLUME VOLUME

LEVEL 10

VOLUME

LEVEL 11

LEVEL 2

LEVEL 3

LEVEL 4

LEVEL 5

LEVEL 6

LEVEL 7

LEVEL 8

LEVEL 9

SALSA

REGGAE

POP

SAMBA

TANGO

FIELD

SOUND

P FILE

X-GROOVE

EFECT

ON/OFF

(Page 65)

(Page 65)

Ver. 1.1

HCD-ZX10D

6868HCD-ZX10D

7-40. PRINTED WIRING BOARDS – PANEL SECTION (4/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

S957

S965

S967

D925

NO922

S961

S962

S960 S959

S963

S958 S956

S964

JW10

17

JW10

18

S966

C964 C965

R871Q916

R888R890

R893 R894

R895

R883

R884R885R886R889 R891

R887 R882

NO900

S939

S938

CN911

S937

R896

R866

R834

S935

S933

CN914

D919 D918

S932 S931

S934

S936

JW920

JW910

CN915

JW911

JR903

Q907

R846R845

R844R843

R842

R840 R837

R833R835

JOG BOARD

1-861-392-

11

(13)

CD-L BOARD

1-861-393-

11

(13)

E

TC-A BOARD

1-861-395-

11

(13)PANEL BOARD

CN908(Page 64)

Y

1

7E

FLASH

FLASH

DISC 1DISC 2

DISC SKIPEX-CHANGE OPEN/CLOSE

DISC 3DISC 4DISC 5

DIRECTION

JOGROTARY ENCODER

MODESPEAKERS

PLAYMODE

X-ROUNDON/OFF

D925, S966

13

S931 – 939,S956, 958 – 967

13

DOLBY PL

REPEAT

12

PANELBOARDNO909

(Page 64)

Z

D916, S936

D918, S935

A

B

C

D

E

1 2 3 4 5 6 7 8 9

Ver. 1.1

HCD-ZX10D

6969HCD-ZX10D

7-41. SCHEMATIC DIAGRAM – PANEL SECTION (4/5) –

R834R896R866

S939S938S937

CN911

R842

Q907

S931 S932 S933 S934 S935 S936

R845R844R843R840R837

R846

CN914NO900

CN915

S962S963 S960S961 S956S958S959

R883

R882R884R887 R886 R885R889R891

S964

NO922

R880 R890

R871

C965

C964

R893R894

S965S966S967

R895

Q916

D925

S957

R833 R835

JR903

D918 D919

15k22k33k

2P

100

DTC114EKA-T146

2.2k3.3k4.7k6.8k10k

1.5k

3P3P

7P

470

6801k2.2k 1.5k 1.5k3.3k4.7k

7P

680 680

100

0.01

0.01

6.8k10k15k

DTC114EKA

SLR-325DCT31

680 680

0

SLR-325MCT31 SLR-325MCT31

KEY0

DGNDDGND

TAPE A LED

DGND

+VL 9V

+VH 9V

KEY0

KEY5

KEY5

KEY5

LED GND

JOG A

JOG B

SPK MODE LED

LED GND

DGND

KEY5

+VL 9V

DISC 1DISC 5 DISC 4 DISC 3 DISC 2

OPEN/CLOSE

FLASH EX-CHANGEMODE

SPEAKERS

X-ROUND

ON/OFF

LED DRIVE

X-ROUND

ON/OFF

ROTARY ENCODER

JOG

DOLBY PL REPEAT PLAY

MODE

DIRECTION

LED DRIVE

DISC SKIP

(Page 65)

(Page 65)

Ver. 1.1

HCD-ZX10D

7070HCD-ZX10D

7-42. PRINTED WIRING BOARDS – PANEL SECTION (5/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.

S952

NO925

D926

S950 S951

S953

S955S954

R881

R879 R878

R877R876

R875R874R873

R872

Q917

JW93

1

JW932

JW933

JW934

JW93

6

JW938

JW935

S945

CN905

NO919

D924

D923

D922

D921

S948

S947

S941

S940

S944

S943

S942

JW93

0S949

JW937

CN916

R864

JR907

R850

R849

R847

R858

R855

R852

R848

Q909

R868

JR908

Q910

R860R859

R857

R870R869

R861

NO901

S930

R832

E

D926, S955u

1-861-398-

11

(13)

CD-R BOARD

E

E

1 2

D924, S949

1-861-390-

11

(13)

TC-B BOARD

FUNCTION SW BOARD

1-861-389-

11

(13)

D923, S948

REC PAUSE/START

GAMEMIXING

D922, S940

CD SYNC

GAMED921, S941

PANELBOARDNO917

(Page 64)

BB

S930, 940 – 945,S947 – 955

1 5

+

ALBUM

–

FUNCTION

1 2

A

B

C

D

E

1 2 3 4 5

D921 D-2D922 C-2D923 B-2D924 B-1D926 C-5

Q909 C-1Q910 B-1Q917 C-4

• SemiconductorLocation

Ref. No. Location

Ver. 1.1

HCD-ZX10D

7171HCD-ZX10D

7-43. SCHEMATIC DIAGRAM – PANEL SECTION (5/5) –

R832NO901

CN905

CN916

R860R850

R870

R869R868

S940 S941 S942 S943 S944 S945 S947 S949 S948

NO919

R873 R874 R875 R876 R877R872

S950 S951 S952 S953 S954 S955

NO925

Q910Q909

R881

Q917

R847 R849 R857 R859 JR908JR907

D923 D924D921

R864R861R858R855R852R848

S930

D926

R878 R879

D922

22k2P

5P

9P

100100

6.8k

10k15k

2P

4.7k 6.8k 10k 15k 22k3.3k

5P

DTC114EKA-T146DTC114EKA-T146

100

DTC114EKA-T146

680 680 680 680 00

SLR-325MCT31 SLR-325MCT31SLR-325MCT31

4706801k1.5k1.5k2.2k

SLR-325MCT31

680 680

SLR-325VCT31

GND

KEY 4

LED GND

VL +9V

VH +9V

DGND

+VL 9V

LED GND

GAME, REC LED

TAPE B LED

KEY 3

GND

CD LED

CD LED

DGND

+VL 9V

LED GND

CD LED

KEY4

KEY4

DGND

KEY TC-B

KEY3

STARTGAME

LED DRIVE LED DRIVE

START

GAME GAME

MIXING

CD SYNC

FUNCTION

LED DRIVE

+- ALBUM

REC PAUSE/

REC PAUSE/

(Page 65)

Ver. 1.1

HCD-ZX10D

7272HCD-ZX10D

7-44. PRINTED WIRING BOARDS – POWER SUPPLY SECTION – • See page 35 for Circuit Boards Location.

NO1111

JW11

82

JW11

83

JW11

86

JW11

87

JW11

42

JW11

43

JW11

44

JW11

45

JW11

94

JW11

84

JW11

85

JW11

88

JW11

89

CN1112

JW11

93

JW11

92

JW1131

JW1111

JW1121

R1192

CN1113

F1141

F1171

F1161

F1151

D1192

FH1152 FH1151

FH1171FH1172

FH1161FH1162 FH1141FH1142

FH1181FH1182

FH1191FH1192

C1192

F1181

F1191

NO1001

NO1003

EP1004

CN1002

CN1000

S1000

CN1004

EP1003

L100

1

JW1004

RY1000

JW10

09JW

1010

JW10

08

JW10

06

JW10

07

JW10

05

C1006

JW1001

Q1000

R1000

R100

1

D1000

JR1002

C1004

C1002

C1001

1-861-385-

11

(14)

TRANS BOARD 6

1

7

1

POWERBOARDNO607

(Page 57)

U

POWERBOARDNO603

(Page 57)

T1

4

(E15, SP, MY)

NOT REPLACEABLE:BUILT IN TRANSFORMER

T1100POWER

TRANSFORMER

E

1-861-384-

11

(14)

VOLTAGE SELECTOR BOARD(CHASSIS) (CHASSIS)

VOLTAGE SELECTOR

230 – 240V 220V 120V

(MX, AUS)

(E15, SP, MY)

2

(AC IN)

1

2

1

1

2

SWITCHINGPOWER

1

14

3

(E15, SP, MY)

MAIN BOARDNO401

(Page 51)K

A

B

C

D

E

F

G

H

I

J

1 2 3 4 5 6 7 8 9

Ver. 1.1

HCD-ZX10D

7373HCD-ZX10D

7-45. SCHEMATIC DIAGRAM – POWER SUPPLY SECTION –

C1006

R1001

NO1003

NO1001

CN1000R1000

D1192

C1192

F1141

F1151

F1161

F1171

F1181

F1191

CN1112

CN1113

JW1192

JW1193

R1192

JW1111

JW1121

JW1131

T1100

NO1111

CN1004

JW1004

C1004

EP1003

JR1002

D1000

RY1000

S1000

C1001 C1002

Q1000

CN1002

10006.3V

100k

2P

2P

3P4.7k

10EDB40

10063V

T8AL250V

T8AL250V

T8AL250V

T8AL250V

T4AL250V

T4AL250V

6P

7P

0.68

0.1

0

1SS355TE

0.1 0.1L100118µH

2SC2412KT-146-R

2P

230-240 (E15, SP, MY, AUS)127 (MX)

220

120

D-GND

N

L

AC3

AC4

AC4

VF

VF

AC3

VP

L

GND

GND

VH(AC)

VH(AC)

VL(AC)

VL(AC)

EVER+4VEVER+4V

STBY RLY

D-GND

(CHASSIS)

5

3

1

7

8

12

9

10

11

13

14

15

16

17

18

19

POWER TRANSFORMER 2P

4P (E15, SP, MY)

(MX, AUS)(E15, SP, MY)

BUILT IN TRANSFORMER

NOT REPLACEABLE:∗

2P

4P (E15, SP, MY)

(MX, AUS)

(E15, SP, MY)

L

230-240 (E15, SP, MY, AUS)127 (MX)

220

120

120V

220V

230-240V

VOLTAGE SELECTOR

(E15, SP, MY)

(MX, AUS)

POWER ON/OFF

RELAY DRIVE

(AC IN)

SWITCHING

POWER

(Page 59)

(Page 58)

(Page 53)

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

HCD-ZX10D

7474HCD-ZX10D

400 mVp-p

Approx.100 mVp-p

Approx. 50 mVp-p

1.09 Vp-p

Approx.0.1 Vp-p

Approx.0.2 Vp-p

1.09 Vp-p

50 ns

3.4 Vp-p

37 ns

4 Vp-p

H

0.7 Vp-p

1Vp-p

1.2 Vp-p

H

0.7 Vp-p

H

2.2 Vp-p

– RF Board – – DMB07 Board –

qa IC001 1 (DVDRFP)

500 mV/DIV, 100 ns/DIV

qs IC001 el (TE)

100 mV/DIV, 5 ms/DIV

qd IC001 r; (FE)

200 mV/DIV, 5 ms/DIV

qf IC001 tj (RFAC)

500 mV/DIV, 100 ns/DIV

7 IC207 <zxx (VDAC_3)(DVD play (color bar) mode)

1 V/DIV, 20 ns/DIV

8 IC207 <zxb (VDAC_2)(DVD play (color bar) mode)

1 V/DIV, 20 ns/DIV

9 IC207 <zx, (VDAC_1)(DVD play (color bar) mode)

1 V/DIV, 10 ns/DIV

q; IC207 <zcz (VDAC_0)(DVD play (color bar) mode)

1 V/DIV, 10 ns/DIV

1 IC509 el (FE)(DVD play mode)

100 mV/DIV, 5 ms/DIV

2 IC509 ra (TE)(DVD play mode)

200 mV/DIV, 5 ms/DIV

3 IC509 t; (RFAC)(DVD play mode)

1 V/DIV, 100 ns/DIV

4 IC901 r; (XTAL)

1 V/DIV, 20 ns/DIV

5 IC906 8 (XTO)

1 V/DIV, 20 ns/DIV

6 IC207 <zz. (VDAC_4)(DVD play (color bar) mode)

1 V/DIV, 20 ns/DIV

H

1.5 Vp-p

H

1.5 Vp-p

H

2.2 Vp-p

2.5 Vp-p

1.9 Vp-p

0.4 Vp-p

11.4 µs

4.3 Vp-p

11.4 µs

15.4 Vp-p

30.5 µs

2.8 Vp-p

62.5 ns

1.6 Vp-p

250 ns

3.2 Vp-p

– VIDEO Board – – MAIN Board – – PANEL Board –

wa IC1201 qh (CROUT)(DVD play (color bar) mode)

2 V/DIV, 20 µs/DIV

ws IC1201 qk (CBOUT)(DVD play (color bar) mode)

2 V/DIV, 20 µs/DIV

wd IC1201 w; (CYOUT), wa (YOUT)(DVD play (color bar) mode)

2 V/DIV, 20 µs/DIV

wf IC1201 wd (CVBSOUT)(DVD play (color bar) mode)

2 V/DIV, 10 µs/DIV

ra IC901 is (X-OUT)

1 V/DIV, 100 ns/DIV

ea Q101 (Base) (REC mode)

2 V/DIV, 5 µs/DIV

es Q101 (Collector) (REC mode)

5 V/DIV, 5 µs/DIV

ed IC401 qa (XC-OUT)

1 V/DIV, 10 µs/DIV

ef IC401 qd (X-OUT)

1 V/DIV, 20 ns/DIV

wg IC1201 wh (C OUT)(DVD play (color bar) mode)

2 V/DIV, 10 µs/DIV

wh IC1201 wj (S-DCOUT)(DVD play (color bar) mode)

500 mV/DIV, 10 µs/DIV

• Waveforms

75

HCD-ZX10D

MUX ATT INPUTBIAS AGC

GCA

PROGRAMMABLEEQUALIZER

FILTERDIFFERENTIATOR

64 63 62 61 60 59 58 57 5156

12

FULL WAVERECTIFER

AGC CHARGEPUMP

+–

+–

++

+++

+

++

++

––

+–

+–

INPUTSEL ATT

2

4

2

2

INPUTIMPEDANCE

SEL

OFFSETCANSEL

MNTRCONTROL

SERIALPORT

REGISTER

4FROM

S-PORT

4FROM

S-PORT

INPUTIMPEDANCE

SEL

3FROM

S-PORT

CLAMP &ENVELOPE

LEVELDACSIGDET

AGCO

BUFFER

55 54 53 52 50 49

OUTPUTINHIBIT

FROM S-PORT

3

4

5

6

78

9

10

11

12

13

14

15

16

17

GCA

CD/DVD

4FROM

S-PORT

3FROM

S-PORT

MUX

3FROM

S-PORT

GCA

3FROM

S-PORT

3FROM

S-PORT

EQ

VC

COMPARATOR

PHASEDETECTOR

PHASEDETECTOR

A+D

B+D

++

A+C

B+C

GCAW/LPF

SUMAMP

18 19 20 21 22 24 2523 26 27 28 29 31 3230

GCAGCA

VCI FOR SERVO INPUT

VC = VPB/2

DUAL APC

LD H/LFROM S-PORT

APC SELDVD/CD

TOPHOLDGCA

TOPHOLD

GCA

41

48474645

GCAOFFSETCANSEL

5FROM

S-PORT

GCA 40

GCAOFFSETCANSEL

6FROM

S-PORT

3FROM

S-PORT

GCAGCA

CEFDBCP/CNLOW

IMPEDANCE

CD/DVD

SUBGCAMUX GCALPF

GCALPF

39

38

3736

OFFSETCANSEL

PEAK/BOTTOMHOLD

BOTTOMENVELOPE

INPUTBUFFER

5FROM

S-PORT

GCALPF

V25/2

TERST

35

34

33

FOR SERVOOUTPUT

PH

TOPHOLD

GCASEL

LINKEN

MUX

HOLDEN

+–

+–

COMPA-RATOR

INTERNALFDGHG

HYSTERESISTER& OFFSET

FROM S-PORT

MIRRCOMPARATOR

INPUT GAINFROM S-PORT

SEL

DAC

SINK CURRENTFROM S-PORT

2

AGCO

FAST ATTACK

AGCHOLD

BCADET

2FROMS-PORT

PH

2

2

INPUTIMPEDANCE

FROM S-PORT

4443

42

V33 FOROUTPUTBUFFER

PIFETECE

V25V125

V25/3

LPF ATTPOL SELBUFFER

CONTROLSIGNALSTO EACHBLOCK

3CE ATTCEPOL

D

C

B

A

CD F

CD E

VPB VC

DVDL

DCD

LD

CDPD

DVDP

D

LDONVN

B

MIR

R

MP

MB

MIN

MEV

O

MLP

F

CE

SDENSDATASCLKV33

FE

TE

PI

V25V125

TPH

DFT

LINK

LCPLCN

MNTR

DVDRFPDVDRFN

A2

B2

C2

D2

CPCN

D

C

B

A

CD D

CD C

CD B

CD A

RFDC

RFSI

N

ATOP

ATON

AIN

AIP

VPA

RFAC

VNA

BYP

DIN

DIP

FNP

FNN

MEV

RX

• IC Block Diagrams– RF Board –

IC001 SP3723CAF0PM

76

HCD-ZX10D

1OE

21DC11D

19 1Q

20 VCC

32DC11D

18 2Q

43DC11D

17 3Q

54DC11D

16 4Q

65DC11D

15 5Q

76DC11D

14 6Q

87DC11D

13 7Q

98D

10GND

C11D

12 8Q

11 LE

– DMB07 Board –

IC231 – 233, 256, 258, 259SN74LV573APWR

SYSTEMCLOCK

MANAGER

FUNCTIONCONTROL

INTERFACE

SERIALINPUT

INTERFACE

4X/8XOVER SAMPLING

DIGITALFILTERWITH

FUNCTIONCONTROLLER

ENHANCEDMULTI-LEVELDELTA-SIGMA

MOJULE

ZERO DETECT

DAC LPF

DAC LPF

DAC LPF

DAC LPF

DAC LPF

DAC LPF

DAC LPF

DAC LPF

RST

SCKISCKO

BCK

TEST

VDD

DGND

DATA1DATA2DATA3

ZEROA

LRCK

37

3839

40

42

43

44

454647

48

41

ZERO

1/GP

O1

ZERO

2/GP

O2

ZERO

3/GP

O3

ZERO

4/GP

O4

ZERO

5/GP

O5

ZERO

6/GP

O6 NC NC

VOUT

6

VOUT

5

VOUT

4

VOUT

3

1 2 3 4 5 6 7 8 9 10 11 12

VOUT2

VOUT1

VCOM

VOUT7

AGND5VCC5AGND6

VOUT8

AGND4VCC4AGND3VCC3

13

14

15

16

171819

20

21222324

ML

MC

MDI

MDO

ZERO

8DA

TA4

ZERO

7

NC VCC1

AGND

1

VCC2

AGND

2

36 35 34 33 3132 30 29 28 27 26 25

IC302 PCM1609KPTR

SINGLE-ENDDEFERENTIALCONVERTER

REFERENCESINGLE-END

DEFERENTIALCONVERTER

DIGITAL ∑MODULATOR

DIGITAL ∑MODULATOR 1/64

DECIMATIONFILTER

&LOW-CUT

FILTER

CLOCK/TIMING CONTROL RESET/

POWER CONTROL

SERIAL I/OINTERFACE

&MODE/FORMAT

CONTROL

LIN

V RE

F 1

REFC

OM

V RE

F 2

RIN

RSTB

FMT0

BYPA

SS

FMT1

MOD

E1M

ODE0

FSYN

C

1 2 3 4 5 6 87 9 1110 12

AGND

VCC

C PR

C NR

C PR

C NR

DGND

SYSC

LK

DOUT

BCK

LRCK

VDD

24 23 22 21 20 19 17 16 15 14 1318

IC352 PCM1800E/2K

77

HCD-ZX10D

1VDD1

2VSS1

3MO1

4MO2

5VDD2

6VSS2

7XTI

8XTO

16 NC

15 SO2

14 FSEL

13 SO1

12 VDD3

11 VSS3

10 AO2

9 AO1X'TALOSC

REF.DIV. 0

PHASEDETECTOR0

LOOPDIV. 0

CHARGEPUMP 0 LPF 0 VCO 0

REF.DIV. 1

PHASEDETECTOR1

LOOPDIV. 1

CHARGEPUMP 1 LPF 1 VCO 1

CONTROLLOGIC

IC906 SM8707GV-G-E2

DOUT

LRCKPCMD

BCK

DVDD2ASYEMD2

EMPHXTSL

DVSS2XTAI

XTAO

SQSOSQCKSCSYSBSOEXCK

SOUTSOCKXOLT

SETEVCTES1TEST1DVSS1FRDR

FFDR

TRDR

TFDR

SRDR

SFDR

DVDD1FSTOSSTP

MDPLOCKPWMI

FOKDFCT

DIGITALCLV

PROCESSOR

OSC

DIGITALOUT

EFMDEMODULATOR

32KRAM

ERRORCORRECTOR

D/A DIGITALINTERFACE

MIRR, DFCT,FOK

DETECTORCPU

INTERFACE

SUBCODEPROCESSOR

SERVOAUTO

SEQUENCER

SERVO INTERFACE

DVDD

0

XRST

MUT

E

DATA

XLAT

CLOK

SENS

SCLK

ATSK

WFC

KXU

GFXP

CK GFS

C2PO

SCOR C4M

WDC

KDV

SS0

COUT

MIR

R

AVDD

0IG

ENAV

SS0

ADIO

RFDC

CE TEAVSS

1RF

ACAS

YIAS

YO

BIAS

AVDD

1PC

OFI

LIFI

LOCL

TV

V16M

VCTL

VPCO

59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

2122

232425

262728

29

30

31

32

33

34353637383940

8079787776

757473

7271706968

676665

64

636261

OPER

ATIO

NAL

AMPL

IFIE

R &

ANAL

OG S

WIT

CH

A/D

CONV

ERTE

R

FOCUSPWM

GENERATORTRACKING

PWMGENERATOR

SLEDPWM

GENERATOR

FOCUSSERVO

DSPTRACKING

SERVODSPSLED

SERVODSP

ASYMMETRYCORRECTOR

DIGITALPLL

CLOCKGENERATOR

60

IC509 CXD3068Q

78

HCD-ZX10D

– PANEL Board –

IC903 NJM2760V-TE2

IN1 1

BPF2OUT15

BPF1OUT16

RECOUT17

BPF2OUT20

IN2 2

BUF1OUT 3

BPF2IN1 4BPF2IN2 5

BAND-PASSFILTER

BPF3IN1 6BPF3IN2 7

BAND-PASSFILTER

BPF4IN1 8BPF4IN2 9

GND 10

BAND-PASSFILTER

DET

DET

BPF1IN219BPF1IN118

BAND-PASSFILTERDET

BPF3OUT14DET

BPF4OUT13

N.C.12V+11

DET

– MAIN Board –

IC514, 515 BA6956AN

1 2 3 4 5 6 7 8 9

CONTROL LOGIC

TSD

VREF

OUT2

OUT1

RNF

VM VCC

FIN

GND

RIN

1 2 3 4

ASOPROTECTION

CIRCUIT

REFERENCEVOLTAGE

GENERATIONCIRCUIT

OVERHEATPROTECTION

CIRCUIT

OUTPUTON/OFF

CONTROLCIRCUIT

DC IN

PUT

DC O

UTPU

T

GND

ON/O

FFCO

NTRO

L

IC516 PQ12RF21J00H

OVERCURRENT

PROTECTOR

LATCH&

DRIVER

OVER HEATPROTECTOR

REGULATOR

ON/OFFSOFT

START+–

+–

RESET

VREF

COMPARATOR

ERROR AMP

OSC

1

VIN

2

SW O

UT

3

GND

4

VOS

5

ON/O

FF

IC517 SI-8050JFIC518 SI-8033JF

– MIC Board –

IC851 M65850FP-E1

OSCILLATOR

1/2 VCC

AUTORESET

LPF1

MAINCONTROL

A/D

20KBITSRAM

LPF2D/A

1 2 3 4 5 6 7

891014 13 12 11

CLOCK

RESETMO

MID1 DO0

DO1

VCC

CLOC

K

REF

OP2I

N

OP2O

UT

LPF2

IN

LPF2

OUT

LPF1

IN

LPF1

OUT

OP1O

UT

OP1I

N

CC1

CC2

GND

Ver. 1.1

79

HCD-ZX10D

• IC Pin Function DescriptionDMB07 BOARD IC207 ZIVA5X-C2F-B (DVD SYSTEM PROCESSOR)

Pin No. Pin Name I/O Description

1 VDDP – Power supply terminal (+3.3V)

2 HA1 O Address signal output to the program ROM and address latch

3 to 11 HD15 to HD7 I/OTwo-way data bus (address signal multiplexed) with the program ROM and

address latch

12 VDDP – Power supply terminal (+3.3V)

13 GNDP – Ground terminal

14 to 19 HD6 to HD1 I/OTwo-way data bus (address signal multiplexed) with the program ROM and

address latch

20 VDDP – Power supply terminal (+3.3V)

21 GNDP – Ground terminal

22 HD0 I/OTwo-way data bus (address signal multiplexed) with the program ROM and

address latch

23 HDTACK I Acknowledge signal input terminal for host data transfer Not used

24 HIRQ0 I Interrupt signal input terminal Not used

25 WEH.UDS O Write enable host upper data strobe signal output to the program ROM

26 WEL.LDS O Write enable host lower data strobe signal output terminal Not used

27 HREAD O Output enable signal output to the program ROM

28 GPIO0 I Check jig detection signal input terminal

29 GND – Ground terminal

30 VDD – Power supply terminal (+1.8V)

31 GND25 – Ground terminal

32 VDD25 – Power supply terminal (+3.3V)

33 to 42 MA9 to MA0 O Address signal output to the SD-RAM

43 GND25 – Ground terminal

44 VDD25 – Power supply terminal (+3.3V)

45, 46 MA10,MA11 O Address signal output to the SD-RAM

47, 48 BA1, BA0 O Bank select signal output to the SD-RAM

49 MCS0 O Chip select signal output to the SD-RAM

50 MCS1 O Chip select signal output terminal Not used

51 MRAS O Row address strobe signal output to the SD-RAM

52 MCAS O Column address strobe signal output to the SD-RAM

53 MWE O Write enable signal output to the SD-RAM

54 GND25 – Ground terminal

55 VDD25 – Power supply terminal (+3.3V)

56 MCLK O Master clock signal output to the SD-RAM

57 to 60 MD0 to MD3 I/O Two-way data bus with the SD-RAM

61 GND25 – Ground terminal

62 MDQM0 O Write mask signal output to the SD-RAM

63 VDD25 – Power supply terminal (+3.3V)

64 to 71 MD6 to MD11 I/O Two-way data bus with the SD-RAM

72 GND25 – Ground terminal

73 MDQM1 O Write mask signal output to the SD-RAM

74 VDD25 – Power supply terminal (+3.3V)

75 to 78 MD12 to MD15 I/O Two-way data bus with the SD-RAM

79 GND – Ground terminal

80 VDD – Power supply terminal (+1.8V)

81 to 84 MD16 to MD19 I/O Two-way data bus with the SD-RAM

85 GND25 – Ground terminal

Ver. 1.1

80

HCD-ZX10D

Pin No. Pin Name I/O Description

86 MDQM2 O Write mask signal output to the SD-RAM

87 VDD25 – Power supply terminal (+3.3V)

88 to 95 MD20 to MD27 I/O Two-way data bus with the SD-RAM

96 GND25 – Ground terminal

97 MDQM3 O Write mask signal output to the SD-RAM

98 VDD25 – Power supply terminal (+3.3V)

99 to 102 MD28 to MD31 I/O Two-way data bus with the SD-RAM

103 GND25 – Ground terminal

104 VDD25 – Power supply terminal (+3.3V)

105 VCLK O Not used

106 XCK_I/O_SEL O Not used

107 VS O Wide control signal output to the video amplifier

108 I/P SW OInterlace/progressive selection signal output terminal

"L": interlace, "H": progressive

109 CDSEL O Digital out signal selection signal output terminal Not used

110 MREQ O Muting request signal output to the master controller

111 VDDP – Power supply terminal (+3.3V)

112 GNDP – Ground terminal

113 MDI O Serial data output to the D/A converter

114 MC O Serial data transfer clock signal output to the D/A converter

115 ML O Serial data latch pulse signal output to the D/A converter

116 HIRQ2 I Busy signal input from the EEPROM

117 VDAC_4B – Ground terminal

118 VDAC_VDD4 – Power supply terminal (+3.3V)

119 VDAC_4 O Component video signal output to the video amplifier

120 VDAC_3B – Ground terminal

121 VDAC_VDD3 – Power supply terminal (+3.3V)

122 VDAC_3 O Component video signal output to the video amplifier

123 VDAC_2B – Ground terminal

124 VDAC_VDD2 – Power supply terminal (+3.3V)

125 VDAC_2 O Y signal output to the video amplifier

126 VDAC_1B – Ground terminal

127 VDAC_VDD1 – Power supply terminal (+3.3V)

128 VDAC_1 O Chroma signal output to the video amplifier

129 VDAC_0B – Ground terminal

130 VDAC_VDD0 – Power supply terminal (+3.3V)

131 VDAC_0 O Video signal output to the video amplifier

132 VDAC_DVSS – Ground terminal

133 VDAC_DVDD – Power supply terminal (+3.3V)

134 VDAC_REFVDD – Power supply terminal (+3.3V)

135 VDAC_REF I Reference voltage input terminal

136 VDAC_REFVSS – Ground terminal

137 XVSS – Ground terminal

138 XOUT O Clock signal output terminal Not used

139 XIN I System clock signal (27 MHz) input from the clock generator

140 XVDD – Power supply terminal (+3.3V)

141 AVSS2 – Ground terminal

142 AVDD2 – Power supply terminal (+3.3V)

143 AVDD1 – Power supply terminal (+3.3V)

144 AVSS1 – Ground terminal

81

HCD-ZX10D

Pin No. Pin Name I/O Description

145 VDD – Power supply terminal (+1.8V)

146 GND – Ground terminal

147 XCK O Audio system clock output to the D/A converter and A/D converter

148 LRCK O L/R sampling clock signal (44.1 kHz) output to the D/A converter

149 BCK O Bit clock signal (2.8224 MHz) output to the D/A converter

150 DATA0 (DM) O Audio data (for down mix) output to the D/A converter

151 DATA1 (FLR) O Audio data (for front) output to the D/A converter

152 VDDP – Power supply terminal (+3.3V)

153 GNDP – Ground terminal

154 DATA2 (SLR) O Audio data (for surround (rear)) output to the D/A converter

155 DATA3 (CSW) O Audio data (for center and sub woofer) output to the D/A converter

156 IEC958 O S/PDIF signal output terminal Not used

157 DAI_DATA I Data input terminal Not used

158 DAI_BCK I Bit clock signal input terminal Not used

159 DAI_LRCK I L/R sampling clock signal input terminal Not used

160 I2C_CL I/OTwo-way I2C clock bus with the master controller, mechanism controller and

display controller

161 I2C_DA I/OTwo-way I2C data bus with the master controller, mechanism controller and

display controller

162 CS (ZIVA_E2P) O Chip select signal output to the EEPROM

163 RXD1 I Serial data input terminal for check jig

164 TXD1 O Serial data output terminal for check jig

165WRITE_CTRL

(ZIVA_E2P)O Write control signal output to the EEPROM

166 GNDP – Ground terminal

167 VDDP – Power supply terminal (+3.3V)

168 to 171SDDATA7 to

SDDATA4I Stream data signal input from the DVD decoder

172 GND – Ground terminal

173 VDD – Power supply terminal (+1.8V)

174 to 177SDDATA3 to

SDDATA0I Stream data signal input from the DVD decoder

178 SDREQ O Serial data request signal output to the DVD decoder

179 SDEN ISerial data enable signal input from the DVD decoder and L/R sampling clock

signal input from the A/D converter

180 GNDP – Ground terminal

181 VDDP – Power supply terminal

182 SDERROR IStream data signal input from the DVD decoder and digital audio data input from

the A/D converter

183 SDCLK ISerial data transfer clock signal input from the DVD decoder and bit clock signal

input from the A/D converter

184 HIRQ1 I Interrupt request signal input from the mechanism controller

185 DRVCLK I Serial data transfer clock signal input from the mechanism controller

186 DRVTX I Serial data input from the EEPROM and mechanism controller

187 DRVRX O Serial data output to the EEPROM and mechanism controller

188 DRVRDY I Ready signal input from the mechanism controller

189 VNW – Power supply terminal (+5V)

190 ALE O Latch enable signal output to the address latch

191 RST_SPC O Reset signal output to the mechanism controller "L": reset

192 INT/EXT O Internal/external selection signal output terminal

82

HCD-ZX10D

Pin No. Pin Name I/O Description

193, 194 HCS2, HCS1 O Chip select signal output terminal Not used

195 HCS0 O Chip select signal output to the program ROM

196 VDDP – Power supply terminal (+3.3V)

197 TRST I Reset signal input terminal (for JTAG)

198 TDO O Data output terminal (for JTAG)

199 TDI I Data input terminal (for JTAG) Not used

200 TMS I Mode selection signal input terminal (for JTAG)

201 TCK I Clock signal input terminal (for JTAG)

202 RESET I System reset signal input from the master controller "L": reset

203 BUS CLK O Not used

204 GND – Ground terminal

205 VDD – Power supply terminal (+1.8V)

206 HA3 O Address signal output to the program ROM

207 HA2 O Address signal output to the program ROM and address latch

208 GNDP – Ground terminal

83

HCD-ZX10D

DMB07 BOARD IC701 TMC57929PGF-RDP (DVD DECODER)

Pin No. Pin Name I/O Description

1, 2 D5, D6 I/O Two-way data bus with the mechanism controller

3 VSS – Ground terminal

4 D7 I/O Two-way data bus with the mechanism controller

5 A0 I Address signal input from the mechanism controller

6 VDD – Power supply terminal (+3.3V)

7 A1 I Address signal input from the mechanism controller

8 VDD5V – Power supply terminal (+5V)

9 to 14 A2 to A7 I Address signal input from the mechanism controller

15 VSS – Ground terminal

16 XWAIT O Wait signal output terminal Not used

17 XRD I Read strobe signal input from the mechanism controller

18 XWR I Write strobe signal input from the mechanism controller

19 XCS I Chip select signal input from the mechanism controller

20, 21 XINT0, XINT1 O Interrupt signal output to the mechanism controller

22 VDD – Power supply terminal (+3.3V)

23 XHRS I Not used

24 HDB7 O Stream data signal output to the DVD system processor

25 VSS – Ground terminal

26 HDB8 O Stream data signal output to the DVD system processor

27 HDB6 O Stream data signal output to the DVD system processor

28 VDDS – Power supply terminal (+5V)

29 HDB9 O Not used

30 HDB5 O Stream data signal output to the DVD system processor

31 HDBA O Not used

32 HDB4 O Stream data signal output to the DVD system processor

33 VSS – Ground terminal

34 HDBB O Not used

35 HDB3 O Stream data signal output to the DVD system processor

36 VDD – Power supply terminal (+3.3V)

37 HDBC O Not used

38 VDDS – Power supply terminal (+5V)

39 HDB2 O Stream data signal output to the DVD system processor

40 HDBD O Not used

41 HDB1 O Stream data signal output to the DVD system processor

42 VSS – Ground terminal

43 HDBE O Not used

44 HDB0 O Stream data signal output to the DVD system processor

45 HDBF O Not used

46 HDRQ O Serial data effect flag signal output to the DVD system processor

47 VDDS – Power supply terminal (+5V)

48 XHWR O Serial data transfer clock signal output to the DVD system processor

49 XHRD O Header flag signal output terminal Not used

50 VDD – Power supply terminal (+3.3V)

51 REDY O Not used

52 VSS – Ground terminal

53 XHAC I Serial data request signal input from the DVD system processor

54 HINT O Not used

55 XS16 O Not used

56 HA1 I Not used

84

HCD-ZX10D

Pin No. Pin Name I/O Description

57 XPDI I/O Not used

58 VDDS – Power supply terminal (+5V)

59, 60 HA0, HA2 I Not used

61 VSS – Ground terminal

62, 63 HCS0, HCS1 I Not used

64 VDD – Power supply terminal (+3.3V)

65 DASP I/O Not used

66 to 69 MDB0 to MDB3 I/O Two-way data bus with the D-RAM

70 VSS – Ground terminal

71 MDB4 I/O Two-way data bus with the D-RAM

72 VDD5V – Power supply terminal (+5V)

73 to 75 MDB5 to MDB7 I/O Two-way data bus with the D-RAM

76 XMWR O Write enable signal output to the D-RAM

77 VDD – Power supply terminal (+3.3V)

78 XRAS O Row address strobe signal output to the D-RAM

79, 80 MA0, MA1 O Address signal output to the D-RAM

81 VSS – Ground terminal

82 to 87 MA2 to MA7 O Address signal output to the D-RAM

88 VDD – Power supply terminal (+3.3V)

89 MA8 O Address signal output to the D-RAM

90 VSS – Ground terminal

91 MA9 O Address signal output to the D-RAM

92 MNT1 O EEPROM ready signal output to the mechanism controller

93 MNT2 O Not used

94 XOE O Output enable signal output to the D-RAM

95 XCAS O Column address strobe signal output to the D-RAM

96, 97 MDB8, MDB9 I/O Two-way data bus with the D-RAM

98 VSS – Ground terminal

99 MDBA I/O Two-way data bus with the D-RAM

100 VDD – Power supply terminal (+3.3V)

101, 102 MDBB, MDBC I/O Two-way data bus with the D-RAM

103 VDD5V – Power supply terminal (+5V)

104 to 106 MDBD to MDBF I/O Two-way data bus with the D-RAM

107 GFS O Guard frame sync signal output to the mechanism controller

108 VSS – Ground terminal

109 APE0 O Absolute phase error signal output terminal

110 VDD – Power supply terminal (+3.3V)

111 DASYO O RF binary signal output terminal

112 GNDA5 – Ground terminal

113, 114 ASF1, AFS2 – Filter connected terminal for selection the constant asymmetry compensation

115 DASYI I Analog signal input after integrated from the RF binary signal

116 RFDCC I Input terminal for adjusting DC cut high-pass filter for RF signal Not used

117 RFIN I RF signal input from the CD/DVD RF amplifier

118, 119 VCCA5, VCCA4 – Power supply terminal (+3.3V)

120 VCOR1 – VCO oscillating range setting resistor connected terminal

121 VCOIN I VCO input terminal

122, 123 GNDA4, GNDA3 – Ground terminal

124 LPF5 O Signal output from the operation amplifier from PLL loop filter

125 VC1 I Middle point voltage (+1.65V) input terminal

126, 127 LPF2, LPF1 I Inverted signal input to the operation amplifier from PLL loop filter

85

HCD-ZX10D

Pin No. Pin Name I/O Description

128, 129 VCCA3, VCCA2 – Power supply terminal (+3.3V)

130 PDO O Signal output from the charge pump for phase comparator

131 PDHVCC I Middle point voltage input terminal for RF PLL

132 FDO O Signal output from the charge pump for frequency comparator

133, 134 GNDA2, GNDA1 – Ground terminal

135 SPO O Spindle motor control signal output terminal

136 VC2 I Middle point voltage (+1.65V) input terminal

137 MDIN2 I Spindle motor servo drive signal input terminal

138 MDIN1 I MDP input terminal

139 VCCA1 – Power supply terminal (+3.3V)

140 CLVS O Control signal output for selection the spindle control filter constant at CLVS

141 VSS – Ground terminal

142 MDSOUT O Frequency error output terminal of internal CLV circuit

143 VDD – Power supply terminal (+3.3V)

144 MDPOUT O Phase error output of internal CLV circuit

145 DFCT I Defect signal input from the DSP

146 GSCOR I Guard subcode sync (S0+S1) detection signal input from the DSP

147 EXCK O Subcode serial data reading clock signal output to the DSP

148 SBIN I Subcode serial data input from the DSP

149 VSS – Ground terminal

150 SCOR I Subcode sync (S0+S1) detection signal input from the DSP

151 WFCK I Write frame clock signal input from the DSP

152 VDD5V – Power supply terminal (+5V)

153 XRCI I RAM overflow signal input terminal Not used

154 VDDS – Power supply terminal (+5V)

155 C2PO I C2 pointer signal input from the DSP

156 VDD – Power supply terminal (+3.3V)

157 DBCK O Bit clock signal output terminal Not used

158 BCLK I Bit clock signal input from the DSP

159 DDAT O PCM data output terminal Not used

160 MDAT I Serial data input from the DSP

161 VSS – Ground terminal

162 DLRC O L/R sampling clock signal output terminal Not used

163 LRCK I L/R sampling clock signal input from the DSP

164 XRST I Reset signal input from the mechanism controller "L": reset

165 IFS0 I Interface selection signal input terminal Fixed at "L" in this set

166 IFS1 I Interface selection signal input terminal Fixed at "H" in this set

167 XTAL I System clock (33.8688 MHz) input terminal

168 VSS – Ground terminal

169 XTL2 O System clock (33.8688 MHz) output terminal

170 XTL1 I System clock (33.8688 MHz) input from the clock generator

171 VDD – Power supply terminal (+3.3V)

172 to 176 D0 to D4 I/O Two-way data bus with the mechanism controller

86

HCD-ZX10D

DMB07 BOARD IC901 CXP973064-245R (MECHANISM CONTROLLER)

Pin No. Pin Name I/O Description

1 NO_USE O Not used

2 SDEN O Serial data enable signal output to the CD/DVD RF amplifier

3DOCTRL/ Digital out on/off control signal output to the DSP

ISBTESTO

"L": digital out off, "H": digital out on

4 XRST_2753 O Reset signal output terminal Not used

5 SDA_EEP I/O Data bus with the EEPROM

6 MNT1 I EEPROM ready signal input from the DVD decoder

7 FCS_JMP_1 O Focus jump 1 signal output to the motor/coil driver

8 FCS_JMP_2 O Focus jump 2 signal output to the motor/coil driver

9 SENS_CD I Internal status (SENSE) signal input from the DSP

10 CDSP2 OSystem clock frequency selection signal output to the DSP

"L": 16.9344 MHz, "H": 33.8688MHz

11 CDSP4 O Not used

12 XCS_DVD O Chip select signal output to the DVD decoder

13 VSS – Ground terminal

14 to 21 D0 to D7 I/O Two-way data bus with the DVD decoder

22, 23INIT0_DVD,

INIT1_DVDI Interrupt signal input from the DVD decoder

24 MSCK_SAMBA O Serial data transfer clock signal output terminal Not used

25 XRST_1882 O Reset signal output to the DVD decoder "L": reset

26 SCOR I Subcode sync (S0+S1) detection signal input from the DSP

27 LAT_CD O Serial data latch pulse signal output to the DSP

28 LDON O Laser diode on/off control signal output to the CD/DVD RF amplifier

29 MIRR I Mirror signal input from the CD/DVD RF amplifier and DSP

30 COUT_CD I Numbers of track counted signal input from the DSP

31 INLIM IDetection signal input from limit in switch

The optical pick-up is inner position when "H"

32 CS_ZIVA O Chip select signal output terminal

33 SI_ZIVA I Serial data input from the DVD system processor

34 SO_ZIVA O Serial data output to the DVD system processor

35 SCK_ZIVA O Serial data transfer clock signal output to the EEPROM and DVD system

36 DRVIRQ O Interrupt request signal output to the DVD system processor

37 DRVRDY O Ready signal output to the DVD system processor

38 RST I Reset signal input from the DVD system processor "L": reset

39 VSS – Ground terminal

40 XTAL I System clock input terminal (20 MHz)

41 EXTAL O System clock output terminal (20 MHz)

42 VDD – Power supply terminal (+3.3V)

43, 44 SLED_A, SLED_B O Sled motor drive signal output terminal

45 SCK_DSD O Output terminal for offset adjustment of APE0 (<z/. pin of DVD decoder)

46 SDOUT_DSD O Serial data output terminal Not used

47 SDIN_DSD I Serial data input terminal Not used

48 READY_DSD I Ready signal input terminal Not used

49 DATA_CD O Serial data output to the DSP

50 CLOK_CD O Serial data transfer clock signal output to the DSP

51 XMSLAT O Serial data latch pulse signal output terminal Not used

52 SQSO I Subcode Q data input from the DSP

53 MUTE_DSD O Soft muting on/off control signal output terminal Not used

87

HCD-ZX10D

Pin No. Pin Name I/O Description

54 SQCK O Subcode Q data reading clock signal output to the DSP

55 VSS – Ground terminal

56, 57CONTROL_2,

CONTROL_1I Not used

58 GFS_DVD I Guard frame sync signal input from the DVD decoder

59 MUTE_CD O Muting on/off control signal output to the DSP

60 MUTE_2D O Muting on/off control signal output to the motor/coil driver

61 SLED I Sled servo drive PWM signal input from the DSP

62 FG I Spindle motor control signal input from the motor/coil driver

63 SP_ON O Muting on/off control signal output to the motor/coil driver

64 JIT I Jitter signal input terminal

65 TE I Tracking error signal input from the CD/DVD RF amplifier

66 PI I Pull in signal input from the CD/DVD RF amplifier

67 FE I Focus error signal input from the CD/DVD RF amplifier

68 AVSS – Ground terminal

69 AVREF I Reference voltage (+3.3V) input terminal

70 AVDD – Power supply terminal (+3.3V)

71 GFS_CD I Guard frame sync signal input from the DSP

72 SCLK_CD O SENSE serial data reading clock signal output to the DSP

73 TSD-M O Thermal shut down signal output to the motor/coil driver

74 FOK_CD I Focus OK signal input from the DSP

75 LOCK_CD I GFS is sampled by 460 Hz "H" input when GFS is "H"

76 LDSEL O Laser diode selection signal output terminal

77 SACD/DVD O SACD/DVD selection signal output terminal Not used

78 I2C_SIO I/OTwo-way I2C data bus with the DVD system processor, system controller and

display controller

79 I2C_SCL I/OTwo-way I2C clock bus with the DVD system processor, system controller and

display controller

80 RXD I Serial data input from the RS-232C (for check)

81 TXD O Serial data output to the RS-232C (for check)

82 SDCLK_RF O Serial data transfer clock signal output to the CD/DVD RF amplifier

83 SDATA_RF I/O Two-way data bus with the CD/DVD RF amplifier

84 XWR O Write strobe signal output to the DVD decoder

85 XRD O Read strobe signal output to the DVD decoder

86 (PWE) – Not used

87 VDD – Power supply terminal (+3.3V)

88 VSS – Ground terminal

89 to 96 A0 to A7 O Address signal output to the DVD decoder

97 DSAVE O Power save control signal output to the motor/coil driver

98 XDRST O Reset signal output to the DSP "L": reset

99 WP_EEP O Write protect signal output to the EEPROM

100 SCL_EEP O Clock signal output to the EEPROM

88

HCD-ZX10D

MAIN BOARD IC401 M30620MCN-A42FPU0 (MASTER CONTROLLER)

Pin No. Pin Name I/O Description

1 MP3 ACK O Not used

2 MP3 O Not used

3 MP3 CS O Not used

4 SIRCS I Remote control signal input from the remote control receiver

5 MP3 DATA OUT O Not used

6 MP3 DATA IN O Not used

7 MP3 CLK O Not used

8 BYTE IExternal data bus line byte selection signal input terminal

Fixed at "L" in this set

9 CNVSS – Ground terminal

10 XC-IN I Sub system clock input terminal (32.768 kHz)

11 XC-OUT O Sub system clock output terminal (32.768 kHz)

12 RESET I

System reset signal input terminal "L": reset

For several hundreds msec. after the power supply rises, "L" is input, then it

change to "H"

13 X-OUT O Main system clock output terminal (16MHz)

14 VSS – Ground terminal

15 X-IN I Main system clock input terminal (16MHz)

16 VCC – Power supply terminal (+3.3V)

17 NMI I Non-maskable interrupt input terminal Fixed at "H" in this set

18 MP3RST O Not used

19 SCOR O Not used

20 AC-CUT I AC cut on/off detection signal input terminal "L": AC cut on

21 SENS O Not used

22 CD-CLK O Not used

23 XLAT O Not used

24 CD-DATA O Not used

25 XRST/SW RELAY O Not used

26 XTCN O Not used

27 FAN CTRL O Not used

28 STBY RELAY O Relay drive signal output for the main power "H": power on

29 IIC-CLK I/OTwo-way I2C clock bus with the DVD system processor, mechanism controller

and display controller

30 IIC-DATA I/OTwo-way I2C data bus with the DVD system processor, mechanism controller

and display controller

31 SW MUTE O Muting on/off control signal output for sub woofer out "H": muting on

32 REC MUTE O Recording muting on/off control signal output terminal "H": muting on

33 AC CUT MAIN IUnder voltage detection signal input terminal

(Iraninan, Singapore and Malaysia models only)

34 LINE MUTE O Line muting on/off control signal output for front amplifier circuit "H": muting on

35, 36 VMUTE2, VMUTE O Video muting on/off control signal output to the video amplifier "H": muting on

37 SYS RST O System reset signal output to the DVD system processor "L": reset

38 MREQ I Muting request signal input from the DVD system processor

39 AMS MUTE OAutomatic music sensor muting on/off control signal output terminal

"H": muting on

40CD-POWER/

DVD POWERO Power on/off control signal output for the CD/DVD sections "H": power on

41 CD-A-MUTE O CD/DVD analog muting on/off control signal output terminal "H": muting on

42 TSENS I Disc table status detection signal input from the disc table sensor

89

HCD-ZX10D

Pin No. Pin Name I/O Description

43 DSENS I Disc in detection signal input from the disc in detect sensor

44 OC-SW1 I Disc tray open/close detection signal input terminal

45 CHK-SW I Disc chucking detection signal input terminal

46 OC-SW2 I Disc tray open/close detection signal input terminal

47 TBL-NEG O Table motor drive signal output terminal (counterclockwise direction)

48 TBL-POS O Table motor drive signal output terminal (clockwise direction)

49 LOD-NEG O Loading motor drive signal output terminal (load-in direction)

50 LOD-POS O Loading motor drive signal output terminal (load-out direction)

51 A-PLAY IDeck-A playback detection signal input from the tape mechanism deck block

"L": playback

52 A-TRG O Deck-A side trigger plunger drive signal output terminal "H": plunger on

53 A-HALF IDeck-A cassette detection signal input from the tape mechanism deck block

"L": cassette in

54 CPM-CNT2 O Capstan/reel motor drive signal output terminal "L": FWD/stop, "H": REV

55 REC-A IRecording-proof (forward direction) detection signal input from the tape mecha-

nism deck block "L": recording possible

56 B-PLAY IDeck-B playback detection signal input from the tape mechanism deck block

"L": playback

57 B-TRG O Deck-B side trigger plunger drive signal output terminal "H": plunger on

58 REC-B IRecording-proof (reverse direction) detection signal input from the tape mecha-

nism deck block "L": recording possible

59 TC-RELAY ORecording/playback selection signal output terminal

"L": recording, "H": playback

60 BIAS O Recording bias on/off control signal output terminal "H": bias on

61 AMS-IN IAutomatic music sensor detection signal input terminal

"L": music is present, "H": music is not present

62 VCC – Power supply terminal (+3.3V)

63 TC-MUTE O Playback muting on/off control signal output terminal "H": muting on

64 VSS – Ground terminal

65 AUDIO1-DATA O Serial data output to the audio control

66 AUDIO1-CLK O Serial data transfer clock signal output to the audio control

67 AUDIO1-DATA O Serial data output to the electrical volume

68 AUDIO1-CLK O Serial data transfer clock signal output to the electrical volume

69 ANALOG-IN-MUTE O Analog in muting on/off control signal output terminal "H": muting on

70 VIDEO OUT O Video out selection signal output to the video switch "L": CD/DVD, "H": game

71 C-RELAY O Relay drive signal output for the center speaker protect "H": relay on

72 REAR RELAY O Relay drive signal output for the surround (rear) speaker protect "H": relay on

73 DISPLAY-KEY I DISPLAY key input terminal (A/D input)

74 POWER-KEY I POWER key input terminal (A/D input)

75 GC RESET O Reset signal output to the display controller "L": reset

76 STBY LED O LED drive signal output of the standby indicator "H": LED on

77 HP DET I Headphone detection signal input terminal "H": headphone in

78 FR RELAY O Relay drive signal output for the front speaker protect "H": relay on

79 HP MUTE O Headphone muting on/off control signal output terminal "H": muting on

80 STK MUTE O System muting on/off control signal output terminal "L": muting on

81 PROTECT I Protect on/off signal input terminal "L": protect on

82 ST-CLK O PLL serial data transfer clock signal output to the tuner unit

83 ST-DIN I PLL serial data input from the tuner unit

84 ST-DOUT O PLL serial data output to the tuner unit

90

HCD-ZX10D

Pin No. Pin Name I/O Description

85 ST-CE O PLL serial chip enable signal output to the tuner unit

86 TUNED I Tuning detection signal input from the tuner unit "L": tuned

87 STEREO I FM stereo detection signal input from the tuner unit "L": stereo

88 ST-MUTE O Tuner muting on/off control signal output to the tuner unit "H": muting on

89 A-SHUT IDeck-B tape reel rotating detection signal input from the tape mechanism deck

block

90 B-SHUT IDeck-A tape reel rotating detection signal input from the tape mechanism deck

block

91 B-HALF IDeck-B cassette detection signal input from the tape mechanism deck block

"L": cassette in

92 MODEL-IN I Model setting input terminal (A/D input)

93 DEST-IN I Destination setting input terminal (A/D input)

94 I-HOLD IOver voltage detection signal input terminal

(Iraninan, Singapore and Malaysia models only)

95 MIC-DET I Microphone detection signal input terminal "H": microphone in

96 AVSS – Ground terminal (analog system)

97 BPM-DET-LO I Low BPM detection signal input from the band-pass filter

98 VREF I Reference voltage (+3.3V) input terminal (analog system)

99 AVCC – Power supply terminal (+3.3V) (analog system)

100 MP3 O Not used

91

HCD-ZX10D

PANEL BOARD IC901 MB90M407PF-G-142-BNDE1 (DISPLAY CONTROLLER)

Pin No. Pin Name I/O Description

1 to 4 G4 to G1 O Grid drive signal output to the fluorescent indicator tube

5 to 10 SEG-1 to SEG-6 O Segment drive signal output to the fluorescent indicator tube

11 VSS-IO – Ground terminal (for I/O port)

12 to 22 SEG-7 to SEG-17 O Segment drive signal output to the fluorescent indicator tube

23 VDD-FIP – Power supply terminal (+3.3V) (for fluorescent indicator tube)

24 to 41 SEG-18 to SEG-35 O Segment drive signal output to the fluorescent indicator tube

42 VSS-IO – Ground terminal

43 SEG-36 O Segment drive signal output to the fluorescent indicator tube

44 TAPE A LED O LED drive signal output of the tape playback (deck-A) indicator "H": LED on

45 SPK MODE LED O LED drive signal output of the X-ROUND ON/OFF indicator "H": LED on

46 CD LED O LED drive signal output of the CD playback/pause indicator "H": LED on

47 GAME, REC LED OLED drive signal output of the GAME and REC PAUSE/START indicator

"H": LED on

48 VKK – Power supply terminal (–33V) (for fluorescent indicator tube)

49 MD0 I CPU operation mode setting signal input terminal

50 MD1 I Setting terminal for the CPU operation mode Fixed at "H" in this set

51 MD2 I CPU operation mode setting signal input terminal

52 VOL 1, 2 O LED drive signal output of the volume level 1 and 2 indicator "H": LED on

53 VOL 3, 4 O LED drive signal output of the volume level 3 and 4 indicator "H": LED on

54 VOL 5, 6 O LED drive signal output of the volume level 5 and 6 indicator "H": LED on

55 VOL 7, 8 O LED drive signal output of the volume level 7 and 8 indicator "H": LED on

56 VOL9, 10 O LED drive signal output of the volume level 9 and 10 indicator "H": LED on

57 VOL 11, TUNER BAND OLED drive signal output of the volume level 11 and TUNER/BAND indicator

"H": LED on

58 TAPE B LED O LED drive signal output of the tape playback (deck-B) indicator "H": LED on

59 LED SELECT O LED power selection signal output terminal "L": VH+9V, "H": VL+9V

60 I2C-DAT I/OTwo-way I2C data bus with the DVD system processor, system controller and

mechanism controller

61 I2C-CLK I/OTwo-way I2C clock bus with the DVD system processor, system controller and

mechanism controller

62 AVCC – Power supply terminal (+3.3V) (for A/D converter)

63 AVSS – Ground terminal (for A/D converter)

64 to 69 KEY 0 to KEY 5 I Front panel key input terminal (A/D input)

70 BPF1-F01 I Spectrum analyzer drive signal input from the band-pass filter (for 8 kHz)

71 BPF2-F02 I Spectrum analyzer drive signal input from the band-pass filter (for 1.2 kHz)

72 BPF3-F03 I Spectrum analyzer drive signal input from the band-pass filter (for 300 Hz)

73 BPF4-F04 I Spectrum analyzer drive signal input from the band-pass filter (for 80 Hz)

74 ALL BAND I Spectrum analyzer drive signal input from the band-pass filter

75 JOG A I Jog dial pulse input from the rotary encoder (JOG) (A phase input)

76 JOG B I Jog dial pulse input from the rotary encoder (JOG) (B phase input)

77 RESET I Reset signal input from the master controller "L": reset

78 SOFT TEST O Output terminal for the software test

79 VOL B I Jog dial pulse input from the rotary encoder (VOLUME) (B phase input)

80 VOL A I Jog dial pulse input from the rotary encoder (VOLUME) (A phase input)

81 VSS-CPU – Ground terminal (for CPU)

82 XOUT O System clock output terminal (4 MHz)

83 XIN I System clock input terminal (4 MHz)

84 VCC-CPU – Power supply terminal (+3.3V) (for CPU)

92

HCD-ZX10D

Pin No. Pin Name I/O Description

85 NO USE I Not used

86 to 100 G19 to G5 O Grid drive signal output to the fluorescent indicator tube

93

HCD-ZX10D

8-1. CASE SECTION

SECTION 8EXPLODED VIEWS

The components identified by mark0 or dotted line with mark 0 arecritical for safety.Replace only with part numberspecified.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

• Items marked “*” are not stocked since they areseldom required for routine service. Some delayshould be anticipated when ordering these items.

• Accessories are given in the last of the electricalparts list.

1

2

2 7

3

4

5

6

7

back panel section

#1

#1

#1

#1

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

panel board section

NOTE:• -XX and -X mean standardized parts, so they may

have some difference from the original one.• Color Indication of Appearance Parts

Example:KNOB, BALANCE (WHITE) . . . (RED)

• AbbreviationAUS : Australian modelE15 : Iranian modelMX : Mexican modelMY : Malaysia modelSP : Singapore model

Ver. 1.1

1 4-252-686-11 LOADING PANEL2 3-363-099-32 SCREW (CASE 3 TP2)3 4-237-661-31 CASE4 4-252-685-01 COVER (TOP)

5 1-769-992-11 WIRE (FLAT TYPE) (13 CORE)6 1-796-487-51 DECK, MECHANICAL (CWM43RR35)7 3-087-053-01 +BVTP 2.6 (3CR)#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3

94

HCD-ZX10D

8-2. PANEL BOARD SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

51

52

5353

53

53

53

53

53

53

53

53

53

53

53

5455

56

57

58

59

60

not supplied(TC-A board)

not supplied(POWER SW board)

not supplied

not supplied

#1

not supplied

not supplied

not supplied

front panel section

not supplied

not supplied

not supplied(FUNCTION SW board)

not supplied(CURSOR board)

Ver. 1.1

51 4-252-682-01 KNOB (ENTER)52 4-252-684-01 KNOB (VOLUME)53 3-087-053-01 +BVTP 2.6 (3CR)54 4-237-635-11 KNOB (MIC)55 A-4752-629-A MIC BOARD, COMPLETE (E15, MX, SP, MY)

55 A-4753-359-A MIC BOARD, COMPLETE (AUS)56 A-4752-625-A PANEL BOARD, COMPLETE (E15, MX, SP, MY)56 A-4753-357-A PANEL BOARD, COMPLETE (AUS)

57 1-773-163-11 WIRE (FLAT TYPE) (21 CORE)58 A-4752-627-A VOL BOARD, COMPLETE59 A-4751-063-A TC-B BOARD, COMPLETE60 A-4752-641-A GAME/HP BOARD, COMPLETE

(E15, MX, SP, MY)60 A-4753-347-A GAME/HP BOARD, COMPLETE (AUS)

#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3

95

HCD-ZX10D

8-3. FRONT PANEL SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied(CD-L board)

not supplied(CD-R board)

110

108

108

108108

108

108

108

108

108

108

108

108

111

112

112

113

114

115

116

not supplied

101

102

103

104 105

106

107

107

108

109

Ver. 1.1

101 4-252-650-01 WINDOW (TC)102 4-252-649-21 LID (TC)103 4-252-677-01 SPRING (LID)104 4-252-651-01 HOLDER (TC-L)105 4-252-678-01 SPRING (L)

106 4-252-679-01 SPRING (R)107 4-224-104-11 DAMPER108 3-087-053-01 +BVTP 2.6 (3CR)

109 4-252-652-01 HOLDER (TC-R)110 X-4956-392-2 FRONT PANEL ASSY111 4-252-653-02 BUTTON (EJECT-A) (A Z)112 4-254-779-01 SPRING (EJECT)113 4-252-654-02 BUTTON (EJECT-B) (Z B)

114 X-4956-237-1 BRACKET CD ASSY115 4-252-683-01 KNOB (JOG)116 A-4752-631-A JOG BOARD, COMPLETE

96

HCD-ZX10D

8-4. BACK PANEL SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

Ver. 1.1

201 A-1066-611-A VIDEO BOARD, COMPLETE202 1-693-603-31 TUNER (FM/AM)203 1-769-939-11 WIRE (FLAT TYPE) (11 CORE)204 A-1126-833-A MAIN BOARD, COMPLETE (MX)204 A-4752-616-A MAIN BOARD, COMPLETE (SP, MY)

204 A-4753-446-A MAIN BOARD, COMPLETE (AUS)204 A-4753-470-A MAIN BOARD, COMPLETE (E15)205 4-965-822-01 FOOT

* 206 4-988-533-01 HOLDER, PWB

207 1-468-737-21 POWER, SWITCHING208 3-077-331-01 +BV3 (3-CR)

* 209 3-378-433-01 CUSHION, SARANET210 1-861-384-11 VOLTAGE SELECTOR BOARD211 3-559-407-21 CUSHION, STOPPER

212 1-500-497-11 FILTER, CLAMP (FERRITE CORE) (AUS)213 1-500-657-11 CORE, FERRITEM501 1-787-099-21 FAN, DC#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3

M501

DVD mechanism deck section-1

heat sink section

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

#1

not supplied

not supplied

not supplied

not supplied

not supplied

201

213208

207212

209

211

202

206

203

210

204205

(AUS)

97

HCD-ZX10D

8-5. HEAT SINK SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

252 1-861-385-11 TRANS BOARD253 A-4752-634-A SURROUND BOARD, COMPLETE

(E15, MX, SP, MY)253 A-4753-341-A SURROUND BOARD, COMPLETE (AUS)254 A-1126-858-A POWER BOARD, COMPLETE (MX)254 A-4752-643-A POWER BOARD, COMPLETE (E15, SP, MY)

254 A-4753-338-A POWER BOARD, COMPLETE (AUS)255 3-905-609-41 SCREW (TRANSISTOR)

0F1141 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)

0F1151 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)0F1161 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)0F1171 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)0F1181 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4.0AL/250V)0F1191 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4.0AL/250V)

0T1100 1-443-270-11 POWER TRANSFORMER (E15, SP, MY, AUS)0T1100 1-443-790-11 POWER TRANSFORMER (MX)

#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3#2 7-685-881-09 SCREW +BVTT 4X8 (S)

T1100

F1181

F1191

#2

F1141

F1171

chassis section

not supplied

not supplied

not supplied

not supplied(SENSOR board)

#1#1

#1#1

#1

#1

F1161

F1151

252

253

254 255

255

98

HCD-ZX10D

8-6. CHASSIS SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

301 1-500-497-11 FILTER, CLAMP (FERRITE CORE)* 302 3-703-244-00 BUSHING (2104), CORD (SP, MY, AUS)

302 3-703-571-11 BUSHING (S) (4516), CORD (E15, MX)0303 1-777-071-53 CORD, POWER (SP, MY)0303 1-829-627-11 CORD, POWER (E15)

0303 1-829-627-31 CORD, POWER (MX)0303 1-827-295-22 CORD, POWER (AUS)

* 304 4-954-051-41 HOLDER, PC BOARD305 A-1062-666-A DMB07 BOARD, COMPLETE306 1-469-854-11 CORE, FERRITE (AUS)307 1-469-829-11 CORE, FERRITE (AUS)308 1-500-657-11 CORE, FERRITE

#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3

not supplied

not supplied

#1

#1

#1 #1

#1

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not suppliednot supplied

not supplied

not supplied

301

302

303

304

305

308

307

306

306

(AUS)

(AUS)

(AUS)

(AUS)

99

HCD-ZX10D

8-7. DVD MECHANISM DECK SECTION-1 (CDM79B-DVBU64)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

401 3-074-717-21 TRAY402 3-325-697-21 WASHER403 3-074-725-01 BELT, TD404 A-6060-640-A UNIT ASSY, TD405 A-6060-642-A SE-130 BOARD, COMPLETE

406 3-074-737-01 PLATE (GUIDE)407 1-823-921-11 FMS-18 (6 Pin)408 4-218-252-52 SCREW (+PTPWH M2.6), FLOATING#3 7-685-534-19 SCREW +BTP 2.6X8 TYPE2 N-S#4 7-682-544-04 +B 3X3

402

403

404

405 407

401

408

406

DVD mechanism deck section-2

notsupplied

notsupplied

not supplied

#3

#3

#3

#4

not supplied

#3

100

HCD-ZX10D

8-8. DVD MECHANISM DECK SECTION-2 (CDM79B-DVBU64)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

451 3-074-742-01 GEAR (SHAFT)452 4-218-252-52 SCREW (+PTPWH M2.6), FLOATING453 3-074-745-01 BELT (LOADING)454 3-074-744-01 GEAR (LOADING A)455 4-951-619-01 CUSHION (A)

457 3-074-735-01 GEAR (IDOLER)458 3-074-738-01 GEAR (SWING)459 3-074-741-01 GEAR (LOADING B)460 3-016-533-01 WASHER (FR), STOPPER461 3-074-740-01 GEAR (LOADING C)

462 3-074-739-01 COLLAR (SWING)463 3-074-736-01 GEAR (CHUCK)464 A-4736-882-A CHUCK ASSYM001 X-3952-411-1 MOTOR ASSY, LOADINGS002 1-418-746-11 ENCODER, ROTARY

(CHUCKING DETECT, TRAY OPEN/CLOSE DETECT)

#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3#3 7-685-534-19 SCREW +BTP 2.6X8 TYPE2 N-S#5 7-621-259-25 SCREW +P 2.6X4

451

452

457

452

454

453

455

460

462

461

452

464

463

459458

452

not supplied

not supplied(MD-94 board)

optical block section

#3

#5

#1

M001

S002

101

HCD-ZX10D

8-9. OPTICAL BLOCK SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

501 A-4728-690-A RF BOARD, COMPLETE503 3-053-847-31 INSULATOR504 4-981-923-01 SCREW (M), STEP

0505 A-1067-676-A OPTICAL TRAVERSE UNIT (DBU-3)

506 1-824-106-12 CABLE, FLEXIBLE FLAT (24 CORE)507 X-4955-252-3 HOLDER (BU) ASSY#6 7-685-535-19 SCREW +BTP 2.6X10 TYPE2 N-S

504

503

501

503

503

504505

504

506

507

#6

not supplied

102

HCD-ZX10DSECTION 9

ELECTRICAL PARTS LIST

The components identified by mark0 or dotted line with mark 0 arecritical for safety.Replace only with part numberspecified.

• Items marked “*” are not stocked since they areseldom required for routine service. Some delayshould be anticipated when ordering these items.

• SEMICONDUCTORSIn each case, u: µ, for example:uA... : µA... uPA... : µPA... ,uPB... : µPB... uPC... : µPC... ,uPD... : µPD...

• CAPACITORS:uF: µF

• COILSuH: µH

NOTE:• Due to standardization, replacements in the parts

list may be different from the parts specified inthe diagrams or the components used on the set.

• -XX and -X mean standardized parts, so they mayhave some difference from the original one.

• RESISTORSAll resistors are in ohms.METAL: metal-film resistorMETAL OXIDE: Metal Oxide-film resistorF: nonflammable

When indicating parts by referencenumber, please include the board.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

CD-L BOARD***********

< CONNECTOR >

CN911 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2P

< RESISTOR >

R834 1-216-835-11 METAL CHIP 15K 5% 1/10WR866 1-216-839-11 METAL CHIP 33K 5% 1/10WR896 1-216-837-11 METAL CHIP 22K 5% 1/10W

< SWITCH >

S937 1-771-410-21 SWITCH, TACTILE (DOLBY PLII)S938 1-771-410-21 SWITCH, TACTILE (REPEAT)S939 1-771-410-21 SWITCH, TACTILE (PLAY MODE)

************************************************************

CD-R BOARD***********

< LED >

D926 8-719-060-07 LED SLR-325MCT31 (u)

< TRANSISTOR >

Q917 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R872 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR873 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR874 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR875 1-216-833-11 METAL CHIP 10K 5% 1/10WR876 1-216-835-11 METAL CHIP 15K 5% 1/10W

R877 1-216-837-11 METAL CHIP 22K 5% 1/10WR878 1-216-819-11 METAL CHIP 680 5% 1/10WR879 1-216-81911 METAL CHIP 680 5% 1/10WR881 1-216-809-11 METAL CHIP 100 5% 1/10W

< SWITCH >

S950 1-771-410-21 SWITCH, TACTILE (ALBUM –, M)S951 1-771-410-21 SWITCH, TACTILE (ALBUM +, m)S952 1-771-410-21 SWITCH, TACTILE (>)S953 1-771-410-21 SWITCH, TACTILE (.)S954 1-771-410-21 SWITCH, TACTILE (x)

S955 1-771-410-21 SWITCH, TACTILE (u)************************************************************

CURSOR BOARD**************

< RESISTOR >

R978 1-216-833-11 METAL CHIP 10K 5% 1/10WR979 1-216-835-11 METAL CHIP 15K 5% 1/10WR980 1-216-837-11 METAL CHIP 22K 5% 1/10WR981 1-216-839-11 METAL CHIP 33K 5% 1/10WR982 1-216-843-11 METAL CHIP 68K 5% 1/10W

< SWITCH >

S970 1-771-879-11 SWITCH, TACTILE (ENTER)************************************************************

A-1062-666-A DMB07 BOARD, COMPLETE***********************

< CAPACITOR >

C101 1-126-246-11 ELECT CHIP 220uF 20% 4VC151 1-126-206-11 ELECT CHIP 100uF 20% 6.3VC201 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC202 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC203 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C204 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC205 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC213 1-126-209-11 ELECT CHIP 100uF 20% 4VC214 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC215 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C216 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC218 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC220 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC226 1-107-820-11 CERAMIC CHIP 0.1uF 16VC227 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C229 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC230 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC231 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC232 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC233 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C234 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC235 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC236 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC237 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC238 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

CD-L CD-R

CURSOR DMB07

• AbbreviationAUS : Australian modelE15 : Iranian modelMX : Mexican modelMY : Malaysia modelSP : Singapore model

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

103

HCD-ZX10D

C239 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC240 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC241 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC242 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC243 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C244 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC245 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC246 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC247 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC248 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C249 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC250 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC251 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC252 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC253 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C254 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC255 1-117-370-11 CERAMIC CHIP 10uF 10VC256 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC257 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC258 1-117-370-11 CERAMIC CHIP 10uF 10V

C259 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC260 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC261 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC262 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC263 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C264 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC265 1-117-370-11 CERAMIC CHIP 10uF 10VC266 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC267 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC268 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C269 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC270 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC271 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC272 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC274 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C275 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC276 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC277 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC278 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC279 1-164-874-11 CERAMIC CHIP 100PF 5% 50V

C280 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC281 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC282 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC283 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC284 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C286 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC287 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC290 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC291 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC302 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C303 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC304 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC305 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC306 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC307 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C308 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC309 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC321 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C322 1-107-820-11 CERAMIC CHIP 0.1uF 16VC323 1-107-820-11 CERAMIC CHIP 0.1uF 16V

C324 1-107-820-11 CERAMIC CHIP 0.1uF 16VC325 1-126-209-11 ELECT CHIP 100uF 20% 4VC326 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC352 1-126-206-11 ELECT CHIP 100uF 20% 6.3VC355 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C356 1-126-193-11 ELECT CHIP 1uF 20% 50VC357 1-126-193-11 ELECT CHIP 1uF 20% 50VC363 1-107-820-11 CERAMIC CHIP 0.1uF 16VC364 1-126-206-11 ELECT CHIP 100uF 20% 6.3VC365 1-107-820-11 CERAMIC CHIP 0.1uF 16V

C366 1-126-206-11 ELECT CHIP 100uF 20% 6.3VC367 1-164-935-11 CERAMIC CHIP 470PF 10% 50VC368 1-164-935-11 CERAMIC CHIP 470PF 10% 50VC392 1-126-395-11 ELECT CHIP 22uF 20% 16VC393 1-164-947-11 CERAMIC CHIP 0.01uF 50V

C394 1-126-246-11 ELECT CHIP 220uF 20% 4VC501 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC502 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC503 1-127-772-11 CERAMIC CHIP 33000PF 10% 10VC504 1-127-772-11 CERAMIC CHIP 33000PF 10% 10V

C506 1-164-934-11 CERAMIC CHIP 330PF 10% 50VC507 1-117-370-11 CERAMIC CHIP 10uF 10VC508 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50VC509 1-164-934-11 CERAMIC CHIP 330PF 10% 50VC510 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V

C511 1-164-933-11 CERAMIC CHIP 220PF 10% 50VC512 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC513 1-117-370-11 CERAMIC CHIP 10uF 10VC514 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC515 1-164-933-11 CERAMIC CHIP 220PF 10% 50V

C516 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50VC517 1-117-370-11 CERAMIC CHIP 10uF 10VC518 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC519 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC521 1-107-820-11 CERAMIC CHIP 0.1uF 16V

C522 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC523 1-107-820-11 CERAMIC CHIP 0.1uF 16VC524 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC525 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC526 1-126-395-11 ELECT CHIP 22uF 20% 16V

C527 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC528 1-126-395-11 ELECT CHIP 22uF 20% 16VC529 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC530 1-117-370-11 CERAMIC CHIP 10uF 10VC531 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V

C532 1-117-370-11 CERAMIC CHIP 10uF 10VC533 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50VC534 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16VC535 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50VC540 1-117-370-11 CERAMIC CHIP 10uF 10V

C543 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC544 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC545 1-117-370-11 CERAMIC CHIP 10uF 10VC547 1-107-725-11 CERAMIC CHIP 0.1uF 10% 16VC548 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

DMB07

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

104

HCD-ZX10D

C551 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10VC552 1-216-295-00 SHORT CHIP 0C553 1-164-940-11 CERAMIC CHIP 0.0033uF 10% 16VC556 1-117-370-11 CERAMIC CHIP 10uF 10VC558 1-126-209-11 ELECT CHIP 100uF 20% 4V

C559 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC560 1-164-938-11 CERAMIC CHIP 0.0015uF 10% 50VC561 1-107-820-11 CERAMIC CHIP 0.1uF 16VC563 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC565 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V

C567 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC568 1-117-370-11 CERAMIC CHIP 10uF 10VC569 1-107-820-11 CERAMIC CHIP 0.1uF 16VC570 1-117-370-11 CERAMIC CHIP 10uF 10VC573 1-164-874-11 CERAMIC CHIP 100PF 5% 50V

C588 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50VC589 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50VC590 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50VC592 1-124-779-00 ELECT CHIP 10uF 20% 16VC701 1-126-209-11 ELECT CHIP 100uF 20% 4V

C702 1-117-370-11 CERAMIC CHIP 10uF 10VC703 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC705 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC706 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC708 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C709 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC711 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10VC712 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC713 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC714 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V

C715 1-164-938-11 CERAMIC CHIP 0.0015uF 10% 50VC716 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10VC717 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC718 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC720 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V

C721 1-107-820-11 CERAMIC CHIP 0.1uF 16VC722 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC723 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC724 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC725 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C726 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC727 1-117-370-11 CERAMIC CHIP 10uF 10VC728 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC729 1-117-370-11 CERAMIC CHIP 10uF 10VC730 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C733 1-117-370-11 CERAMIC CHIP 10uF 10VC734 1-117-370-11 CERAMIC CHIP 10uF 10VC740 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC741 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC742 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C743 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC744 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC745 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC752 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10VC760 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C761 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC762 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC763 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C764 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC765 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C766 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC767 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC768 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC769 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC770 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C771 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10VC772 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC773 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10VC774 1-164-941-11 CERAMIC CHIP 0.0047uF 10% 16VC775 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C776 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC777 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC778 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC779 1-117-370-11 CERAMIC CHIP 10uF 10VC780 1-117-370-11 CERAMIC CHIP 10uF 10V

C781 1-126-246-11 ELECT CHIP 220uF 20% 4VC782 1-164-938-11 CERAMIC CHIP 0.0015uF 10% 50VC783 1-164-938-11 CERAMIC CHIP 0.0015uF 10% 50VC901 1-126-209-11 ELECT CHIP 100uF 20% 4VC902 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C903 1-126-209-11 ELECT CHIP 100uF 20% 4VC904 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC905 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC906 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC907 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C908 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC909 1-164-874-11 CERAMIC CHIP 100PF 5% 50VC910 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC913 1-127-772-11 CERAMIC CHIP 33000PF 10% 10VC914 1-164-849-11 CERAMIC CHIP 9PF 0.5PF 50V

C915 1-164-847-11 CERAMIC CHIP 7PF 0.5PF 50VC916 1-126-209-11 ELECT CHIP 100uF 20% 4VC917 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC918 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC924 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

C925 1-126-395-11 ELECT CHIP 22uF 20% 16VC926 1-126-246-11 ELECT CHIP 220uF 20% 4VC927 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16VC928 1-117-370-11 CERAMIC CHIP 10uF 10VC1302 1-107-820-11 CERAMIC CHIP 0.1uF 16V

< CONNECTOR >

CN101 1-784-366-21 CONNECTOR, FFC/FPC 7PCN102 1-815-954-21 PIN, CONNECTOR (PC BOARD) 13PCN105 1-784-376-11 CONNECTOR, FFC/FPC 17PCN107 1-778-692-11 CONNECTOR, FFC/FPC 21PCN501 1-778-957-11 CONNECTOR, FFC/FPC 29P

CN901 1-764-177-11 PIN, CONNECTOR (SMD) (1.5mm) 7P

< DIODE >

D202 8-719-988-61 DIODE 1SS355TE-17D392 8-719-988-61 DIODE 1SS355TE-17D393 8-719-988-61 DIODE 1SS355TE-17D394 8-719-988-61 DIODE 1SS355TE-17D500 8-719-988-61 DIODE 1SS355TE-17

DMB07

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

105

HCD-ZX10D

D901 8-719-988-61 DIODE 1SS355TE-17D1303 8-719-988-61 DIODE 1SS355TE-17D1304 8-719-988-61 DIODE 1SS355TE-17

< FERRITE BEAD >

FB105 1-469-324-21 FERRITE, EMI (SMD) (2012)FB902 1-500-284-21 INDUCTOR, FERRITE BEADFB903 1-500-284-21 INDUCTOR, FERRITE BEAD

< FILTER >

FL101 1-234-177-21 FILTER, CHIP EMIFL203 1-234-177-21 FILTER, CHIP EMIFL204 1-234-177-21 FILTER, CHIP EMIFL205 1-234-177-21 FILTER, CHIP EMIFL206 1-234-177-21 FILTER, CHIP EMI

FL302 1-234-177-21 FILTER, CHIP EMIFL303 1-234-177-21 FILTER, CHIP EMIFL352 1-234-177-21 FILTER, CHIP EMIFL501 1-234-177-21 FILTER, CHIP EMIFL502 1-234-177-21 FILTER, CHIP EMI

FL701 1-234-177-21 FILTER, CHIP EMIFL702 1-234-177-21 FILTER, CHIP EMIFL703 1-234-177-21 FILTER, CHIP EMIFL705 1-234-177-21 FILTER, CHIP EMIFL706 1-234-177-21 FILTER, CHIP EMI

FL901 1-234-177-21 FILTER, CHIP EMIFL903 1-234-177-21 FILTER, CHIP EMIFL908 1-234-177-21 FILTER, CHIP EMI

< TRANSISTOR/IC >

IC111 6-550-008-01 TRANSISTOR UM6K1N-TNIC203 6-704-069-01 IC MT48LC4M32B2P-6-Y15W

* IC204 6-703-671-01 IC BR9040F-WE2IC205 6-804-782-01 IC MR27V3202F-1BJTP03B7IC207 6-707-406-01 IC ZIVA5X-C2F-B

IC211 6-700-398-01 IC uPC2918T-E1IC231 8-759-549-21 IC SN74LV573APWRIC232 8-759-549-21 IC SN74LV573APWRIC233 8-759-549-21 IC SN74LV573APWRIC256 8-759-549-21 IC SN74LV573APWR

IC258 8-759-549-21 IC SN74LV573APWRIC259 8-759-549-21 IC SN74LV573APWRIC302 6-703-787-01 IC PCM1609KPTRIC352 8-759-560-56 IC PCM1800E/2KIC392 8-759-583-47 IC uPC2933T-E2

IC501 6-702-157-01 IC FAN8035LIC502 8-759-583-47 IC uPC2933T-E2IC503 8-759-693-13 IC NJM12904V (TE2)IC509 8-752-408-73 IC CXD3068QIC701 6-703-552-01 IC TMC57929PGF-RDP

IC703 8-759-693-13 IC NJM12904V (TE2)IC706 8-759-564-30 IC MSM51V18165B-60TSKR1IC901 8-753-228-87 IC CXP973064-245RIC902 8-759-649-48 IC SN74AHC1G32DCKRIC903 6-704-004-01 IC BR24L16F-WE2

IC904 6-704-753-01 IC SN74AHC2G74HDCU3IC906 6-700-407-01 IC SM8707GV-G-E2IC907 8-759-583-47 IC uPC2933T-E2

< SHORT >

JW392 1-216-864-11 SHORT CHIP 0JW801 1-218-990-11 SHORT CHIP 0JW802 1-218-990-11 SHORT CHIP 0JW803 1-218-990-11 SHORT CHIP 0JW804 1-218-990-11 SHORT CHIP 0

JW805 1-218-990-11 SHORT CHIP 0JW806 1-218-990-11 SHORT CHIP 0

< SHORT/COIL >

L103 1-216-295-00 SHORT CHIP 0L501 1-216-295-00 SHORT CHIP 0L704 1-412-031-11 INDUCTOR 47uHL901 1-412-031-11 INDUCTOR 47uH

< TRANSISTOR >

Q201 8-729-929-26 TRANSISTOR DTC114TEQ202 8-729-929-26 TRANSISTOR DTC114TEQ901 8-729-929-26 TRANSISTOR DTC114TE

< RESISTOR >

R10 1-216-801-11 METAL CHIP 22 5% 1/10WR11 1-216-801-11 METAL CHIP 22 5% 1/10WR12 1-216-801-11 METAL CHIP 22 5% 1/10WR13 1-216-801-11 METAL CHIP 22 5% 1/10WR14 1-216-801-11 METAL CHIP 22 5% 1/10W

R15 1-216-801-11 METAL CHIP 22 5% 1/10WR197 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR198 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR202 1-216-841-11 METAL CHIP 47K 5% 1/10WR213 1-218-939-11 RES-CHIP 68 5% 1/16W

R215 1-216-864-11 SHORT CHIP 0R217 1-216-864-11 SHORT CHIP 0R219 1-216-864-11 SHORT CHIP 0R220 1-216-864-11 SHORT CHIP 0R221 1-216-864-11 SHORT CHIP 0

R222 1-216-864-11 SHORT CHIP 0R225 1-216-864-11 SHORT CHIP 0R226 1-216-864-11 SHORT CHIP 0R227 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR228 1-216-864-11 SHORT CHIP 0

R230 1-216-803-11 METAL CHIP 33 5% 1/10WR231 1-216-803-11 METAL CHIP 33 5% 1/10WR232 1-216-803-11 METAL CHIP 33 5% 1/10WR234 1-216-833-11 METAL CHIP 10K 5% 1/10WR240 1-216-841-11 METAL CHIP 47K 5% 1/10W

R241 1-216-864-11 SHORT CHIP 0R244 1-216-821-11 METAL CHIP 1K 5% 1/10WR245 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR246 1-216-833-11 METAL CHIP 10K 5% 1/10WR247 1-216-821-11 METAL CHIP 1K 5% 1/10W

R248 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR250 1-216-864-11 SHORT CHIP 0R251 1-216-864-11 SHORT CHIP 0R253 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR254 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R255 1-216-864-11 SHORT CHIP 0

DMB07

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

106

HCD-ZX10D

R257 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR259 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR260 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR261 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R263 1-218-285-11 METAL CHIP 75 5% 1/10WR264 1-218-285-11 METAL CHIP 75 5% 1/10WR265 1-218-285-11 METAL CHIP 75 5% 1/10WR266 1-218-285-11 METAL CHIP 75 5% 1/10WR267 1-218-285-11 METAL CHIP 75 5% 1/10W

R268 1-216-864-11 SHORT CHIP 0R269 1-216-864-11 SHORT CHIP 0R270 1-216-864-11 SHORT CHIP 0R271 1-216-809-11 METAL CHIP 100 5% 1/10WR272 1-216-809-11 METAL CHIP 100 5% 1/10W

R273 1-216-864-11 SHORT CHIP 0R274 1-216-864-11 SHORT CHIP 0R275 1-216-864-11 SHORT CHIP 0R276 1-216-864-11 SHORT CHIP 0R277 1-216-864-11 SHORT CHIP 0

R278 1-218-285-11 METAL CHIP 75 5% 1/10WR279 1-218-285-11 METAL CHIP 75 5% 1/10WR280 1-218-285-11 METAL CHIP 75 5% 1/10WR281 1-218-285-11 METAL CHIP 75 5% 1/10WR282 1-218-285-11 METAL CHIP 75 5% 1/10W

R283 1-218-847-11 METAL CHIP 1K 0.5% 1/10WR284 1-218-829-11 METAL CHIP 180 0.5% 1/10WR290 1-216-809-11 METAL CHIP 100 5% 1/10WR291 1-216-809-11 METAL CHIP 100 5% 1/10WR292 1-216-809-11 METAL CHIP 100 5% 1/10W

R293 1-216-864-11 SHORT CHIP 0R294 1-216-864-11 SHORT CHIP 0R296 1-216-864-11 SHORT CHIP 0R299 1-216-820-11 METAL CHIP 820 5% 1/10WR301 1-216-821-11 METAL CHIP 1K 5% 1/10W

R302 1-216-813-11 METAL CHIP 220 5% 1/10WR303 1-216-813-11 METAL CHIP 220 5% 1/10WR304 1-216-813-11 METAL CHIP 220 5% 1/10WR305 1-216-813-11 METAL CHIP 220 5% 1/10WR306 1-216-813-11 METAL CHIP 220 5% 1/10W

R307 1-216-813-11 METAL CHIP 220 5% 1/10WR308 1-216-813-11 METAL CHIP 220 5% 1/10WR309 1-216-813-11 METAL CHIP 220 5% 1/10WR310 1-216-809-11 METAL CHIP 100 5% 1/10WR311 1-216-809-11 METAL CHIP 100 5% 1/10W

R312 1-216-809-11 METAL CHIP 100 5% 1/10WR313 1-216-833-11 METAL CHIP 10K 5% 1/10WR314 1-216-801-11 METAL CHIP 22 5% 1/10WR327 1-216-864-11 SHORT CHIP 0R328 1-216-864-11 SHORT CHIP 0

R329 1-216-864-11 SHORT CHIP 0R335 1-216-864-11 SHORT CHIP 0R352 1-216-864-11 SHORT CHIP 0R353 1-216-864-11 SHORT CHIP 0R362 1-216-833-11 METAL CHIP 10K 5% 1/10W

R368 1-216-864-11 SHORT CHIP 0R369 1-216-864-11 SHORT CHIP 0R392 1-216-797-11 METAL CHIP 10 5% 1/10WR503 1-216-841-11 METAL CHIP 47K 5% 1/10W

R504 1-216-841-11 METAL CHIP 47K 5% 1/10W

R505 1-216-841-11 METAL CHIP 47K 5% 1/10WR506 1-216-841-11 METAL CHIP 47K 5% 1/10WR510 1-216-847-11 METAL CHIP 150K 5% 1/10WR511 1-216-847-11 METAL CHIP 150K 5% 1/10WR512 1-216-842-11 METAL CHIP 56K 5% 1/10W

R513 1-216-842-11 METAL CHIP 56K 5% 1/10WR514 1-216-833-11 METAL CHIP 10K 5% 1/10WR515 1-216-833-11 METAL CHIP 10K 5% 1/10WR516 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR517 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R519 1-216-845-11 METAL CHIP 100K 5% 1/10WR520 1-216-833-11 METAL CHIP 10K 5% 1/10WR521 1-216-845-11 METAL CHIP 100K 5% 1/10WR522 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR523 1-216-833-11 METAL CHIP 10K 5% 1/10W

R524 1-216-833-11 METAL CHIP 10K 5% 1/10WR525 1-216-833-11 METAL CHIP 10K 5% 1/10WR527 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR529 1-216-839-11 METAL CHIP 33K 5% 1/10WR530 1-216-842-11 METAL CHIP 56K 5% 1/10W

R533 1-216-839-11 METAL CHIP 33K 5% 1/10WR534 1-216-842-11 METAL CHIP 56K 5% 1/10WR536 1-216-833-11 METAL CHIP 10K 5% 1/10WR537 1-216-843-11 METAL CHIP 68K 5% 1/10WR545 1-216-833-11 METAL CHIP 10K 5% 1/10W

R548 1-216-833-11 METAL CHIP 10K 5% 1/10WR550 1-216-821-11 METAL CHIP 1K 5% 1/10WR551 1-216-821-11 METAL CHIP 1K 5% 1/10WR552 1-216-821-11 METAL CHIP 1K 5% 1/10WR555 1-216-864-11 SHORT CHIP 0

R558 1-216-841-11 METAL CHIP 47K 5% 1/10WR559 1-216-821-11 METAL CHIP 1K 5% 1/10WR560 1-216-821-11 METAL CHIP 1K 5% 1/10WR561 1-216-821-11 METAL CHIP 1K 5% 1/10WR562 1-216-821-11 METAL CHIP 1K 5% 1/10W

R563 1-216-821-11 METAL CHIP 1K 5% 1/10WR564 1-216-821-11 METAL CHIP 1K 5% 1/10WR565 1-216-821-11 METAL CHIP 1K 5% 1/10WR566 1-216-833-11 METAL CHIP 10K 5% 1/10WR567 1-216-827-11 METAL CHIP 3.3K 5% 1/10W

R568 1-216-857-11 METAL CHIP 1M 5% 1/10WR571 1-216-857-11 METAL CHIP 1M 5% 1/10WR572 1-216-853-11 METAL CHIP 470K 5% 1/10WR573 1-216-833-11 METAL CHIP 10K 5% 1/10WR576 1-216-864-11 SHORT CHIP 0

R579 1-216-832-11 METAL CHIP 8.2K 5% 1/10WR580 1-216-839-11 METAL CHIP 33K 5% 1/10WR581 1-216-834-11 METAL CHIP 12K 5% 1/10WR583 1-216-864-11 SHORT CHIP 0R584 1-216-839-11 METAL CHIP 33K 5% 1/10W

R586 1-218-747-11 METAL CHIP 200K 0.5% 1/10WR587 1-216-864-11 SHORT CHIP 0R588 1-216-833-11 METAL CHIP 10K 5% 1/10WR589 1-216-833-11 METAL CHIP 10K 5% 1/10WR591 1-216-864-11 SHORT CHIP 0

R593 1-216-845-11 METAL CHIP 100K 5% 1/10W

DMB07

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

107

HCD-ZX10D

R599 1-216-821-11 METAL CHIP 1K 5% 1/10WR601 1-216-864-11 SHORT CHIP 0R629 1-216-864-11 SHORT CHIP 0R694 1-216-833-11 METAL CHIP 10K 5% 1/10W

R698 1-216-864-11 SHORT CHIP 0R699 1-216-864-11 SHORT CHIP 0R700 1-216-832-11 METAL CHIP 8.2K 5% 1/10WR707 1-216-809-11 METAL CHIP 100 5% 1/10WR708 1-216-853-11 METAL CHIP 470K 5% 1/10W

R709 1-216-847-11 METAL CHIP 150K 5% 1/10WR710 1-216-833-11 METAL CHIP 10K 5% 1/10WR711 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR712 1-216-833-11 METAL CHIP 10K 5% 1/10WR713 1-216-833-11 METAL CHIP 10K 5% 1/10W

R714 1-216-833-11 METAL CHIP 10K 5% 1/10WR715 1-216-833-11 METAL CHIP 10K 5% 1/10WR716 1-216-809-11 METAL CHIP 100 5% 1/10WR717 1-216-845-11 METAL CHIP 100K 5% 1/10WR718 1-216-833-11 METAL CHIP 10K 5% 1/10W

R719 1-216-821-11 METAL CHIP 1K 5% 1/10WR720 1-216-821-11 METAL CHIP 1K 5% 1/10WR721 1-216-839-11 METAL CHIP 33K 5% 1/10WR724 1-216-821-11 METAL CHIP 1K 5% 1/10WR725 1-216-824-11 METAL CHIP 1.8K 5% 1/10W

R726 1-216-845-11 METAL CHIP 100K 5% 1/10WR727 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR728 1-216-833-11 METAL CHIP 10K 5% 1/10WR730 1-216-801-11 METAL CHIP 22 5% 1/10WR731 1-216-801-11 METAL CHIP 22 5% 1/10W

R732 1-216-833-11 METAL CHIP 10K 5% 1/10WR733 1-216-833-11 METAL CHIP 10K 5% 1/10WR734 1-216-833-11 METAL CHIP 10K 5% 1/10WR735 1-216-833-11 METAL CHIP 10K 5% 1/10WR736 1-216-833-11 METAL CHIP 10K 5% 1/10W

R737 1-216-833-11 METAL CHIP 10K 5% 1/10WR738 1-216-833-11 METAL CHIP 10K 5% 1/10WR741 1-216-801-11 METAL CHIP 22 5% 1/10WR742 1-216-801-11 METAL CHIP 22 5% 1/10WR743 1-216-801-11 METAL CHIP 22 5% 1/10W

R744 1-216-801-11 METAL CHIP 22 5% 1/10WR745 1-216-841-11 METAL CHIP 47K 5% 1/10WR746 1-216-841-11 METAL CHIP 47K 5% 1/10WR747 1-216-839-11 METAL CHIP 33K 5% 1/10WR748 1-216-839-11 METAL CHIP 33K 5% 1/10W

R750 1-216-833-11 METAL CHIP 10K 5% 1/10WR751 1-216-864-11 SHORT CHIP 0R758 1-216-864-11 SHORT CHIP 0R760 1-216-864-11 SHORT CHIP 0R762 1-216-837-11 METAL CHIP 22K 5% 1/10W

R763 1-216-832-11 METAL CHIP 8.2K 5% 1/10WR764 1-216-857-11 METAL CHIP 1M 5% 1/10WR765 1-216-837-11 METAL CHIP 22K 5% 1/10WR767 1-216-841-11 METAL CHIP 47K 5% 1/10WR769 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R776 1-216-864-11 SHORT CHIP 0R777 1-216-864-11 SHORT CHIP 0R778 1-216-845-11 METAL CHIP 100K 5% 1/10WR785 1-216-833-11 METAL CHIP 10K 5% 1/10W

R786 1-216-845-11 METAL CHIP 100K 5% 1/10W

R787 1-216-845-11 METAL CHIP 100K 5% 1/10WR788 1-216-845-11 METAL CHIP 100K 5% 1/10WR789 1-216-845-11 METAL CHIP 100K 5% 1/10WR799 1-216-864-11 SHORT CHIP 0R805 1-216-864-11 SHORT CHIP 0

R901 1-216-801-11 METAL CHIP 22 5% 1/10WR902 1-216-801-11 METAL CHIP 22 5% 1/10WR904 1-216-833-11 METAL CHIP 10K 5% 1/10WR905 1-216-801-11 METAL CHIP 22 5% 1/10WR906 1-216-801-11 METAL CHIP 22 5% 1/10W

R907 1-216-801-11 METAL CHIP 22 5% 1/10WR908 1-216-833-11 METAL CHIP 10K 5% 1/10WR911 1-216-833-11 METAL CHIP 10K 5% 1/10WR912 1-216-833-11 METAL CHIP 10K 5% 1/10WR913 1-216-833-11 METAL CHIP 10K 5% 1/10W

R915 1-216-809-11 METAL CHIP 100 5% 1/10WR916 1-216-821-11 METAL CHIP 1K 5% 1/10WR917 1-216-821-11 METAL CHIP 1K 5% 1/10WR918 1-216-801-11 METAL CHIP 22 5% 1/10WR920 1-216-809-11 METAL CHIP 100 5% 1/10W

R921 1-216-809-11 METAL CHIP 100 5% 1/10WR922 1-216-801-11 METAL CHIP 22 5% 1/10WR923 1-216-813-11 METAL CHIP 220 5% 1/10WR925 1-216-809-11 METAL CHIP 100 5% 1/10WR926 1-216-809-11 METAL CHIP 100 5% 1/10W

R927 1-216-857-11 METAL CHIP 1M 5% 1/10WR928 1-216-809-11 METAL CHIP 100 5% 1/10WR929 1-216-809-11 METAL CHIP 100 5% 1/10WR930 1-216-809-11 METAL CHIP 100 5% 1/10WR931 1-216-801-11 METAL CHIP 22 5% 1/10W

R932 1-216-801-11 METAL CHIP 22 5% 1/10WR933 1-216-801-11 METAL CHIP 22 5% 1/10WR935 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR936 1-216-809-11 METAL CHIP 100 5% 1/10WR938 1-216-833-11 METAL CHIP 10K 5% 1/10W

R940 1-216-809-11 METAL CHIP 100 5% 1/10WR942 1-216-809-11 METAL CHIP 100 5% 1/10WR943 1-216-809-11 METAL CHIP 100 5% 1/10WR958 1-216-801-11 METAL CHIP 22 5% 1/10WR962 1-216-833-11 METAL CHIP 10K 5% 1/10W

R964 1-216-833-11 METAL CHIP 10K 5% 1/10WR970 1-216-864-11 SHORT CHIP 0R974 1-216-864-11 SHORT CHIP 0R975 1-216-833-11 METAL CHIP 10K 5% 1/10WR978 1-216-833-11 METAL CHIP 10K 5% 1/10W

R984 1-216-833-11 METAL CHIP 10K 5% 1/10WR988 1-216-864-11 SHORT CHIP 0R990 1-216-864-11 SHORT CHIP 0R994 1-216-864-11 SHORT CHIP 0R995 1-216-864-11 SHORT CHIP 0

R996 1-216-864-11 SHORT CHIP 0R997 1-216-864-11 SHORT CHIP 0R998 1-216-864-11 SHORT CHIP 0R1000 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR1302 1-216-864-11 SHORT CHIP 0

R9980 1-216-864-11 SHORT CHIP 0

DMB07

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

108

HCD-ZX10D

R9981 1-216-864-11 SHORT CHIP 0R9982 1-216-864-11 SHORT CHIP 0R9983 1-216-864-11 SHORT CHIP 0R9984 1-216-864-11 SHORT CHIP 0

R9985 1-216-864-11 SHORT CHIP 0R9998 1-216-864-11 SHORT CHIP 0R9999 1-216-864-11 SHORT CHIP 0

< VIBRATOR >

X901 1-781-945-21 VIBRATOR, CERAMIC (20MHz)X902 1-795-630-11 VIBRATOR, CRYSTAL (27MHz)

************************************************************

FUNCTION SW BOARD******************

< RESISTOR >

R832 1-216-837-11 METAL CHIP 22K 5% 1/10W

< SWITCH >

S930 1-771-410-21 SWITCH, TACTILE (FUNCTION)************************************************************

A-4752-641-A GAME/HP BOARD, COMPLETE(E15, MX, SP, MY)

A-4753-347-A GAME/HP BOARD, COMPLETE (AUS)************************

< CAPACITOR >

C840 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC841 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC842 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC843 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

< CONNECTOR >

* CN801 1-564-720-11 PIN, CONNECTOR (SMALL TYPE) 4PCN802 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P

* CN803 1-564-719-11 PIN, CONNECTOR (SMALL TYPE) 3P

< EARTH TERMINAL >

EPT803 1-537-738-21 TERMINAL, GROUND (E15, SP, MY)EPT804 1-537-738-21 TERMINAL, GROUND (E15, SP, MY)

< JACK >

J850 1-764-592-11 JACK 3P (GAME INPUT VIDEO/AUDIO)J851 1-770-226-11 JACK (LARGE TYPE) (PHONES)

< RESISTOR >

R826 1-216-809-11 METAL CHIP 100 5% 1/10WR827 1-216-845-11 METAL CHIP 100K 5% 1/10WR828 1-216-845-11 METAL CHIP 100K 5% 1/10WR829 1-216-821-11 METAL CHIP 1K 5% 1/10WR830 1-216-821-11 METAL CHIP 1K 5% 1/10W

************************************************************

A-4752-631-A JOG BOARD, COMPLETE********************

< CAPACITOR >

C964 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC965 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

< LED >

D925 8-719-061-96 LED SLR-325DCT31 (X-ROUND ON/OFF)

< TRANSISTOR >

Q916 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R871 1-216-809-11 METAL CHIP 100 5% 1/10WR882 1-216-819-11 METAL CHIP 680 5% 1/10WR883 1-216-817-11 METAL CHIP 470 5% 1/10WR884 1-216-821-11 METAL CHIP 1K 5% 1/10WR885 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

R886 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR887 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR888 1-216-819-11 METAL CHIP 680 5% 1/10WR889 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR890 1-216-819-11 METAL CHIP 680 5% 1/10W

R891 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR893 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR894 1-216-833-11 METAL CHIP 10K 5% 1/10WR895 1-216-835-11 METAL CHIP 15K 5% 1/10W

< SWITCH/ROTARY ENCODER >

S956 1-771-410-21 SWITCH, TACTILE (DISC 1)S957 1-478-133-11 ENCODER, ROTARY (JOG)S958 1-771-410-21 SWITCH, TACTILE (DISC 2)S959 1-771-410-21 SWITCH, TACTILE (DISC 3)S960 1-771-410-21 SWITCH, TACTILE (DISC 4)

S961 1-771-410-21 SWITCH, TACTILE (DISC 5)S962 1-771-410-21 SWITCH, TACTILE (Z OPEN/CLOSE)S963 1-771-410-21 SWITCH, TACTILE (EX-CHANGE)S964 1-771-410-21 SWITCH, TACTILE (DISC SKIP)S965 1-771-410-21 SWITCH, TACTILE (FLASH)

S966 1-771-410-21 SWITCH, TACTILE (X-ROUND ON/OFF)S967 1-771-410-21 SWITCH, TACTILE (MODE, SPEAKERS)

************************************************************

A-1126-833-A MAIN BOARD, COMPLETE (MX)A-4752-616-A MAIN BOARD, COMPLETE (SP, MY)A-4753-446-A MAIN BOARD, COMPLETE (AUS)A-4753-470-A MAIN BOARD, COMPLETE (E15)

*********************

7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3

< CAPACITOR >

C101 1-126-964-11 ELECT 10uF 20% 50VC102 1-126-964-11 ELECT 10uF 20% 50VC103 1-126-964-11 ELECT 10uF 20% 50VC104 1-126-964-11 ELECT 10uF 20% 50VC106 1-126-960-11 ELECT 1uF 20% 50V

DMB07 FUNCTION SW GAME/HP JOG MAIN

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

109

HCD-ZX10D

C107 1-164-156-11 CERAMIC CHIP 0.1uF 25VC108 1-126-947-11 ELECT 47uF 20% 35VC109 1-162-960-11 CERAMIC CHIP 220PF 10% 50VC110 1-126-964-11 ELECT 10uF 20% 50VC111 1-126-959-11 ELECT 0.47uF 20% 50V

C112 1-126-964-11 ELECT 10uF 20% 50VC115 1-164-156-11 CERAMIC CHIP 0.1uF 25VC116 1-126-933-11 ELECT 100uF 20% 16VC117 1-126-961-11 ELECT 2.2uF 20% 50VC118 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V

C119 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25VC120 1-126-964-11 ELECT 10uF 20% 50VC121 1-100-436-11 CERAMIC CHIP 0.033uF 10% 25VC122 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50VC123 1-162-961-11 CERAMIC CHIP 330PF 10% 50V

C124 1-126-964-11 ELECT 10uF 20% 50VC126 1-162-963-11 CERAMIC CHIP 680PF 10% 50VC128 1-126-959-11 ELECT 0.47uF 20% 50VC129 1-126-961-11 ELECT 2.2uF 20% 50VC130 1-136-497-81 FILM 0.1uF 5% 50V

C131 1-136-169-00 FILM 0.22uF 5% 50VC132 1-126-960-11 ELECT 1uF 20% 50VC133 1-162-963-11 CERAMIC CHIP 680PF 10% 50VC134 1-162-963-11 CERAMIC CHIP 680PF 10% 50VC135 1-162-960-11 CERAMIC CHIP 220PF 10% 50V

C136 1-162-960-11 CERAMIC CHIP 220PF 10% 50VC137 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC138 1-137-194-81 FILM 0.47uF 5% 50VC139 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC140 1-136-170-00 FILM 0.27uF 5% 50V

C141 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC142 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC143 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50VC144 1-100-436-11 CERAMIC CHIP 0.033uF 10% 25VC145 1-126-964-11 ELECT 10uF 20% 50V

C146 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25VC147 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25VC148 1-126-961-11 ELECT 2.2uF 20% 50VC149 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC150 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C151 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC152 1-137-427-11 MYLAR 120PF 5% 50VC153 1-126-964-11 ELECT 10uF 20% 50VC154 1-137-427-11 MYLAR 120PF 5% 50VC155 1-136-495-11 FILM 0.068uF 5% 50V

C156 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC157 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC158 1-137-194-81 FILM 0.47uF 5% 50VC159 1-126-964-11 ELECT 10uF 20% 50VC160 1-126-960-11 ELECT 1uF 20% 50V

C162 1-126-964-11 ELECT 10uF 20% 50VC163 1-126-964-11 ELECT 10uF 20% 50VC164 1-126-964-11 ELECT 10uF 20% 50VC165 1-126-964-11 ELECT 10uF 20% 50VC166 1-126-964-11 ELECT 10uF 20% 50V

C167 1-126-960-11 ELECT 1uF 20% 50VC168 1-130-483-00 MYLAR 0.01uF 5% 50VC169 1-126-964-11 ELECT 10uF 20% 50V

C170 1-162-961-11 CERAMIC CHIP 330PF 10% 50VC171 1-136-170-00 FILM 0.27uF 5% 50V

C172 1-126-933-11 ELECT 100uF 20% 16VC173 1-126-933-11 ELECT 100uF 20% 16VC174 1-126-935-11 ELECT 470uF 20% 16VC175 1-137-194-81 FILM 0.47uF 5% 50VC176 1-162-963-11 CERAMIC CHIP 680PF 10% 50V

C177 1-126-964-11 ELECT 10uF 20% 50VC178 1-126-960-11 ELECT 1uF 20% 50VC179 1-130-483-00 MYLAR 0.01uF 5% 50VC180 1-126-964-11 ELECT 10uF 20% 50VC181 1-162-927-11 CERAMIC CHIP 100PF 5% 50V

C182 1-162-974-11 CERAMIC CHIP 0.01uF 50VC183 1-162-927-11 CERAMIC CHIP 100PF 5% 50VC184 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC185 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC186 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V

C187 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50VC188 1-164-156-11 CERAMIC CHIP 0.1uF 25VC191 1-137-150-11 FILM 0.01uF 5% 100VC192 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50VC194 1-130-481-00 MYLAR 0.0068uF 5% 50V

C195 1-126-965-11 ELECT 22uF 20% 50VC196 1-126-947-11 ELECT 47uF 20% 35VC200 1-104-665-11 ELECT 100uF 20% 25VC201 1-126-964-11 ELECT 10uF 20% 50VC202 1-126-964-11 ELECT 10uF 20% 50V

C203 1-126-964-11 ELECT 10uF 20% 50VC204 1-126-964-11 ELECT 10uF 20% 50VC205 1-126-964-11 ELECT 10uF 20% 50VC206 1-126-964-11 ELECT 10uF 20% 50VC207 1-126-964-11 ELECT 10uF 20% 50V

C208 1-126-964-11 ELECT 10uF 20% 50VC209 1-126-964-11 ELECT 10uF 20% 50VC210 1-126-964-11 ELECT 10uF 20% 50VC211 1-136-497-81 FILM 0.1uF 5% 50VC212 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V

C213 1-136-169-00 FILM 0.22uF 5% 50VC214 1-162-960-11 CERAMIC CHIP 220PF 10% 50VC215 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC216 1-162-960-11 CERAMIC CHIP 220PF 10% 50VC217 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

C218 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC219 1-104-665-11 ELECT 100uF 20% 25VC220 1-137-189-11 FILM 0.18uF 5% 50VC221 1-137-193-11 FILM 0.39uF 5% 50VC222 1-137-189-11 FILM 0.18uF 5% 50V

C223 1-137-193-11 FILM 0.39uF 5% 50VC224 1-126-960-11 ELECT 1uF 20% 50VC225 1-126-960-11 ELECT 1uF 20% 50VC226 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC227 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

C228 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC229 1-126-964-11 ELECT 10uF 20% 50VC230 1-126-964-11 ELECT 10uF 20% 50VC231 1-126-960-11 ELECT 1uF 20% 50VC232 1-162-960-11 CERAMIC CHIP 220PF 10% 50V

MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

110

HCD-ZX10D

C233 1-126-964-11 ELECT 10uF 20% 50VC234 1-126-960-11 ELECT 1uF 20% 50VC235 1-126-964-11 ELECT 10uF 20% 50VC236 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC237 1-126-964-11 ELECT 10uF 20% 50V

C238 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC239 1-126-964-11 ELECT 10uF 20% 50VC240 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50VC241 1-126-964-11 ELECT 10uF 20% 50VC242 1-162-960-11 CERAMIC CHIP 220PF 10% 50V

C243 1-162-960-11 CERAMIC CHIP 220PF 10% 50VC244 1-162-960-11 CERAMIC CHIP 220PF 10% 50VC245 1-126-964-11 ELECT 10uF 20% 50VC246 1-126-964-11 ELECT 10uF 20% 50VC247 1-126-964-11 ELECT 10uF 20% 50V

C248 1-126-964-11 ELECT 10uF 20% 50VC249 1-126-960-11 ELECT 1uF 20% 50VC251 1-126-934-11 ELECT 220uF 20% 16VC252 1-126-960-11 ELECT 1uF 20% 50VC253 1-126-960-11 ELECT 1uF 20% 50V

C254 1-126-960-11 ELECT 1uF 20% 50VC255 1-126-960-11 ELECT 1uF 20% 50VC257 1-126-964-11 ELECT 10uF 20% 50VC259 1-164-360-11 CERAMIC CHIP 0.1uF 16VC292 1-126-963-11 ELECT 4.7uF 20% 50V

C293 1-126-963-11 ELECT 4.7uF 20% 50VC300 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC301 1-164-156-11 CERAMIC CHIP 0.1uF 25VC302 1-126-947-11 ELECT 47uF 20% 35VC303 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C304 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC305 1-164-156-11 CERAMIC CHIP 0.1uF 25VC306 1-126-947-11 ELECT 47uF 20% 35VC307 1-164-156-11 CERAMIC CHIP 0.1uF 25VC341 1-100-556-91 CERAMIC CHIP 0.1uF 10% 25V

C342 1-126-916-11 ELECT 1000uF 20% 6.3VC386 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25VC387 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25VC395 1-164-156-11 CERAMIC CHIP 0.1uF 25VC401 1-126-964-11 ELECT 10uF 20% 50V

(E15, SP, MY)

C402 1-126-964-11 ELECT 10uF 20% 50VC403 1-136-497-81 FILM 0.1uF 5% 50VC404 1-136-497-81 FILM 0.1uF 5% 50VC410 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC411 1-162-917-11 CERAMIC CHIP 15PF 5% 50V

C412 1-164-156-11 CERAMIC CHIP 0.1uF 25VC414 1-164-156-11 CERAMIC CHIP 0.1uF 25VC416 1-104-656-11 ELECT 2200uF 20% 6.3VC462 1-104-665-11 ELECT 100uF 20% 25VC464 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C497 1-164-156-11 CERAMIC CHIP 0.1uF 25VC498 1-126-916-11 ELECT 1000uF 20% 6.3VC499 1-164-156-11 CERAMIC CHIP 0.1uF 25VC500 1-126-947-11 ELECT 47uF 20% 35VC501 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C502 1-126-947-11 ELECT 47uF 20% 35VC503 1-136-159-00 FILM 0.033uF 5% 50V

C504 1-136-159-00 FILM 0.033uF 5% 50VC505 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC506 1-126-933-11 ELECT 100uF 20% 16V

C507 1-130-473-00 MYLAR 0.0015uF 5% 50VC508 1-130-473-00 MYLAR 0.0015uF 5% 50VC509 1-130-479-00 MYLAR 0.0047uF 5% 50VC510 1-130-479-00 MYLAR 0.0047uF 5% 50VC511 1-162-953-11 CERAMIC CHIP 100PF 5% 50V

C512 1-126-961-11 ELECT 2.2uF 20% 50VC513 1-126-961-11 ELECT 2.2uF 20% 50VC514 1-162-953-11 CERAMIC CHIP 100PF 5% 50VC515 1-126-964-11 ELECT 10uF 20% 50VC516 1-126-964-11 ELECT 10uF 20% 50V

C517 1-162-953-11 CERAMIC CHIP 100PF 5% 50VC518 1-162-953-11 CERAMIC CHIP 100PF 5% 50VC519 1-162-957-11 CERAMIC CHIP 220PF 5% 50VC520 1-162-957-11 CERAMIC CHIP 220PF 5% 50VC521 1-162-961-11 CERAMIC CHIP 330PF 10% 50V

C522 1-162-961-11 CERAMIC CHIP 330PF 10% 50VC523 1-162-957-11 CERAMIC CHIP 220PF 5% 50VC524 1-162-957-11 CERAMIC CHIP 220PF 5% 50VC525 1-126-964-11 ELECT 10uF 20% 50VC526 1-126-964-11 ELECT 10uF 20% 50V

C527 1-164-156-11 CERAMIC CHIP 0.1uF 25VC528 1-164-156-11 CERAMIC CHIP 0.1uF 25VC529 1-164-156-11 CERAMIC CHIP 0.1uF 25VC530 1-126-963-11 ELECT 4.7uF 20% 50VC531 1-126-963-11 ELECT 4.7uF 20% 50V

C532 1-126-960-11 ELECT 1uF 20% 50VC533 1-126-960-11 ELECT 1uF 20% 50VC534 1-126-960-11 ELECT 1uF 20% 50VC535 1-126-960-11 ELECT 1uF 20% 50VC536 1-164-156-11 CERAMIC CHIP 0.1uF 25V

(AUS)

C538 1-126-960-11 ELECT 1uF 20% 50VC539 1-126-960-11 ELECT 1uF 20% 50VC540 1-164-156-11 CERAMIC CHIP 0.1uF 25VC541 1-126-768-11 ELECT 2200uF 20% 16VC542 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C543 1-107-714-11 ELECT 10uF 20% 50VC544 1-164-156-11 CERAMIC CHIP 0.1uF 25V

(AUS)C545 1-164-156-11 CERAMIC CHIP 0.1uF 25V

(AUS)C580 1-126-967-11 ELECT 47uF 20% 50VC582 1-128-646-11 ELECT 1000uF 20% 6.3V

C583 1-126-967-11 ELECT 47uF 20% 50VC584 1-164-156-11 CERAMIC CHIP 0.1uF 25VC585 1-112-020-01 ELECT 3300uF 20% 6.3VC586 1-164-156-11 CERAMIC CHIP 0.1uF 25VC587 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C590 1-128-548-11 ELECT 4700uF 20% 25VC591 1-104-665-11 ELECT 100uF 20% 25VC592 1-126-946-11 ELECT 6800uF 20% 25VC594 1-164-156-11 CERAMIC CHIP 0.1uF 25VC595 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C596 1-130-483-00 MYLAR 0.01uF 5% 50VC597 1-130-483-00 MYLAR 0.01uF 5% 50V

MAIN

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

111

HCD-ZX10D

C598 1-130-483-00 MYLAR 0.01uF 5% 50VC599 1-130-483-00 MYLAR 0.01uF 5% 50V

< CONNECTOR >

* CN104 1-569-930-11 SOCKET, CONNECTOR 13PCN404 1-779-275-11 CONNECTOR, FFC (LIF (NON-ZIF)) 7P

* CN502 1-564-709-11 PIN, CONNECTOR (SMALL TYPE) 7PCN503 1-793-602-11 CONNECTOR, FFC/FPC (ZIF) 21PCN504 1-569-906-11 SOCKET, CONNECTOR 11P

CN505 1-778-982-11 CONNECTOR, BOARD TO BOARD 13PCN506 1-778-982-11 CONNECTOR, BOARD TO BOARD 13PCN507 1-568-838-11 CONNECTOR, FFC 21PCN508 1-691-775-11 PLUG (MICRO CONNECTOR) 13PCN509 1-785-323-11 PIN, CONNECTOR (STRAIGHT) 11P

CN513 1-564-506-11 PLUG, CONNECTOR 3P

< DIODE >

D192 8-719-404-50 DIODE MA111-TXD193 8-719-404-50 DIODE MA111-TXD194 8-719-404-50 DIODE MA111-TXD329 8-719-404-50 DIODE MA111-TX (E15, SP, MY)D402 8-719-404-50 DIODE MA111-TX

D403 8-719-404-50 DIODE MA111-TXD404 8-719-404-50 DIODE MA111-TXD405 8-719-404-50 DIODE MA111-TXD406 8-719-404-50 DIODE MA111-TXD407 8-719-404-50 DIODE MA111-TX

D408 6-500-522-21 DIODE 10EDB40-TB3D501 8-719-028-23 DIODE D3SBA20-4101D502 8-719-500-60 DIODE D5SBA20D553 8-719-056-83 DIODE UDZ-TE-17-6.8BD554 8-719-056-83 DIODE UDZ-TE-17-6.8B

D580 8-719-080-53 DIODE RK36LF-B3D581 8-719-080-53 DIODE RK36LF-B3

< EARTH TERMINAL >

EPT501 1-537-738-21 TERMINAL, GROUND

< FERRITE BEAD/SHORT >

FB416 1-414-864-11 FERRITE, EMI (SMD) (1608)FB462 1-414-864-11 FERRITE, EMI (SMD) (1608)FB500 1-216-864-11 SHORT CHIP 0FB501 1-216-864-11 SHORT CHIP 0FB502 1-216-864-11 SHORT CHIP 0

FB503 1-216-864-11 SHORT CHIP 0FB582 1-216-864-11 SHORT CHIP 0 (E15, MX, SP, MY)FB582 1-500-284-21 INDUCTOR, FERRITE BEAD (AUS)FB583 1-216-864-11 SHORT CHIP 0 (E15, MX, SP, MY)FB583 1-500-284-21 INDUCTOR, FERRITE BEAD (AUS)

FB584 1-216-296-11 SHORT CHIP 0FB585 1-216-296-11 SHORT CHIP 0

< IC >

IC101 6-705-667-01 IC M61537FP-RF0GIC401 6-804-822-01 IC M30620MCN-A42FPU0IC402 6-705-809-01 IC BD4929G-TRIC501 6-703-651-11 IC M61530FP-D60G

IC510 6-703-550-01 IC TA7809LS

IC511 6-703-550-01 IC TA7809LSIC513 6-703-547-01 IC TA7805LSIC514 8-759-598-69 IC BA6956ANIC515 8-759-598-69 IC BA6956ANIC516 8-759-518-68 IC PQ12RF21J00H

IC517 6-700-812-01 IC SI-8050JFIC518 6-700-813-01 IC SI-8033JFIC519 8-759-710-97 IC NJM4565M-D

< JACK >

J202 1-770-377-31 JACK, PIN 1P (SUBWOOFER OUT)J701 1-774-411-11 JACK, PIN 6P

(VIDEO/SAT OUT, VIDEO/SAT IN, PHONO IN)

< SHORT >

JR102 1-216-864-11 SHORT CHIP 0JR103 1-216-864-11 SHORT CHIP 0JR104 1-216-864-11 SHORT CHIP 0JR105 1-216-864-11 SHORT CHIP 0JR107 1-216-296-11 SHORT CHIP 0

JR108 1-216-296-11 SHORT CHIP 0JR109 1-216-296-11 SHORT CHIP 0JR110 1-216-296-11 SHORT CHIP 0JR111 1-216-864-11 SHORT CHIP 0JR112 1-216-864-11 SHORT CHIP 0

JR113 1-216-864-11 SHORT CHIP 0JR114 1-216-864-11 SHORT CHIP 0JR115 1-216-864-11 SHORT CHIP 0JR116 1-216-864-11 SHORT CHIP 0JR118 1-216-296-11 SHORT CHIP 0

JR119 1-216-864-11 SHORT CHIP 0JR131 1-216-864-11 SHORT CHIP 0JR204 1-216-296-11 SHORT CHIP 0JR205 1-216-296-11 SHORT CHIP 0JR206 1-216-864-11 SHORT CHIP 0

JR207 1-216-864-11 SHORT CHIP 0JR208 1-216-296-11 SHORT CHIP 0JR209 1-216-296-11 SHORT CHIP 0JR210 1-216-296-11 SHORT CHIP 0JR211 1-216-296-11 SHORT CHIP 0

JR212 1-216-864-11 SHORT CHIP 0JR213 1-216-296-11 SHORT CHIP 0JR214 1-216-864-11 SHORT CHIP 0JR215 1-216-296-11 SHORT CHIP 0JR216 1-216-296-11 SHORT CHIP 0

JR217 1-216-296-11 SHORT CHIP 0JR218 1-216-864-11 SHORT CHIP 0JR270 1-216-864-11 SHORT CHIP 0JR300 1-216-296-11 SHORT CHIP 0JR400 1-216-296-11 SHORT CHIP 0

JR401 1-216-296-11 SHORT CHIP 0JR402 1-216-864-11 SHORT CHIP 0 (MX, AUS)JR403 1-216-864-11 SHORT CHIP 0JR404 1-216-864-11 SHORT CHIP 0JR405 1-216-296-11 SHORT CHIP 0

JR406 1-216-296-11 SHORT CHIP 0

MAIN

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

112

HCD-ZX10D

JR407 1-216-296-11 SHORT CHIP 0JR408 1-216-296-11 SHORT CHIP 0JR409 1-216-296-11 SHORT CHIP 0JR440 1-216-864-11 SHORT CHIP 0

JR441 1-216-864-11 SHORT CHIP 0JR471 1-216-864-11 SHORT CHIP 0 (E15, MX, SP, MY)JR475 1-216-296-11 SHORT CHIP 0JR500 1-216-296-11 SHORT CHIP 0JR501 1-216-864-11 SHORT CHIP 0

JR502 1-216-296-11 SHORT CHIP 0JR503 1-216-296-11 SHORT CHIP 0JR504 1-216-296-11 SHORT CHIP 0JR505 1-216-296-11 SHORT CHIP 0JR506 1-216-864-11 SHORT CHIP 0

JR509 1-216-864-11 SHORT CHIP 0JR510 1-216-296-11 SHORT CHIP 0JR512 1-216-296-11 SHORT CHIP 0JR513 1-216-864-11 SHORT CHIP 0JR514 1-216-864-11 SHORT CHIP 0

JR515 1-216-864-11 SHORT CHIP 0JR516 1-216-864-11 SHORT CHIP 0JR517 1-216-864-11 SHORT CHIP 0JR518 1-216-864-11 SHORT CHIP 0JR519 1-216-864-11 SHORT CHIP 0

< COIL >

L102 1-412-064-11 INDUCTOR 100uHL103 1-410-780-11 INDUCTOR 27mHL104 1-410-780-11 INDUCTOR 27mHL300 1-412-058-11 INDUCTOR 10uHL580 1-456-468-11 INDUCTOR 100uH

L581 1-456-467-11 INDUCTOR 100uH

< TRANSISTOR >

Q101 8-729-141-75 TRANSISTOR 2SD596DV345Q102 8-729-802-80 TRANSISTOR 2SC3661Q103 8-729-802-80 TRANSISTOR 2SC3661Q104 6-550-185-01 TRANSISTOR RT1P137P-TP-1Q105 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q106 8-729-027-43 TRANSISTOR DTC114EKA-T146Q107 8-729-027-31 TRANSISTOR DTA124EKA-T146Q108 8-729-027-43 TRANSISTOR DTC114EKA-T146Q109 8-729-027-43 TRANSISTOR DTC114EKA-T146Q110 8-729-600-22 TRANSISTOR 2SA1235-F

Q111 8-729-802-80 TRANSISTOR 2SC3661Q112 8-729-802-80 TRANSISTOR 2SC3661Q113 8-729-802-80 TRANSISTOR 2SC3661Q114 8-729-802-80 TRANSISTOR 2SC3661Q115 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

Q116 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ140 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q145 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q165 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ180 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

Q190 8-729-027-43 TRANSISTOR DTC114EKA-T146Q191 8-729-903-46 TRANSISTOR 2SB1132-PQ192 8-729-027-43 TRANSISTOR DTC114EKA-T146Q193 8-729-903-46 TRANSISTOR 2SB1132-P

Q194 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q195 8-729-027-43 TRANSISTOR DTC114EKA-T146Q196 8-729-903-46 TRANSISTOR 2SB1132-PQ198 8-729-027-43 TRANSISTOR DTC114EKA-T146Q199 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ200 8-729-120-28 TRANSISTOR 2SC1623-L5L6

Q201 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q202 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ203 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ204 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ205 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

Q206 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ207 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ208 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ209 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ210 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

Q211 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ212 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ270 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ290 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ291 6-550-889-01 TRANSISTOR 2SC5938-T112-1B

Q292 8-729-027-31 TRANSISTOR DTA124EKA-T146Q293 8-729-027-43 TRANSISTOR DTC114EKA-T146Q401 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q402 8-729-027-43 TRANSISTOR DTC114EKA-T146

(E15, SP, MY)Q506 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q509 8-729-027-43 TRANSISTOR DTC114EKA-T146Q523 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ524 6-550-889-01 TRANSISTOR 2SC5938-T112-1BQ528 8-729-027-43 TRANSISTOR DTC114EKA-T146Q529 8-729-027-31 TRANSISTOR DTA124EKA-T146

Q530 8-729-027-43 TRANSISTOR DTC114EKA-T146Q531 8-729-027-31 TRANSISTOR DTA124EKA-T146Q532 8-729-027-31 TRANSISTOR DTA124EKA-T146Q533 8-729-027-31 TRANSISTOR DTA124EKA-T146Q534 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q535 8-729-027-31 TRANSISTOR DTA124EKA-T146Q536 8-729-027-43 TRANSISTOR DTC114EKA-T146Q537 8-729-027-31 TRANSISTOR DTA124EKA-T146Q538 8-729-027-43 TRANSISTOR DTC114EKA-T146Q539 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q540 8-729-027-31 TRANSISTOR DTA124EKA-T146Q552 6-550-185-01 TRANSISTOR RT1P137P-TP-1Q553 8-729-026-68 TRANSISTOR 2SD2525 (TP)Q554 8-729-027-43 TRANSISTOR DTC114EKA-T146Q555 8-729-120-28 TRANSISTOR 2SC1623-L5L6

Q557 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q563 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q590 8-729-014-97 TRANSISTOR FA1L3Z-T1B (E15, SP, MY)Q870 8-729-120-28 TRANSISTOR 2SC1623-L5L6

< RESISTOR >

R101 1-216-841-11 METAL CHIP 47K 5% 1/10WR102 1-216-864-11 SHORT CHIP 0R103 1-216-864-11 SHORT CHIP 0R104 1-216-833-11 METAL CHIP 10K 5% 1/10WR105 1-216-833-11 METAL CHIP 10K 5% 1/10W

MAIN

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

113

HCD-ZX10D

R106 1-216-817-11 METAL CHIP 470 5% 1/10WR107 1-216-821-11 METAL CHIP 1K 5% 1/10WR108 1-216-838-11 METAL CHIP 27K 5% 1/10WR109 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR110 1-216-835-11 METAL CHIP 15K 5% 1/10W

R111 1-216-835-11 METAL CHIP 15K 5% 1/10WR112 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR113 1-216-809-11 METAL CHIP 100 5% 1/10WR114 1-216-833-11 METAL CHIP 10K 5% 1/10WR115 1-216-821-11 METAL CHIP 1K 5% 1/10W

R117 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR118 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR119 1-216-833-11 METAL CHIP 10K 5% 1/10WR120 1-216-833-11 METAL CHIP 10K 5% 1/10WR121 1-216-833-11 METAL CHIP 10K 5% 1/10W

R122 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR123 1-216-833-11 METAL CHIP 10K 5% 1/10WR124 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR125 1-216-841-11 METAL CHIP 47K 5% 1/10WR126 1-216-817-11 METAL CHIP 470 5% 1/10W

R127 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR128 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR129 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR130 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR131 1-216-821-11 METAL CHIP 1K 5% 1/10W

R132 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR133 1-216-857-11 METAL CHIP 1M 5% 1/10WR134 1-216-817-11 METAL CHIP 470 5% 1/10WR135 1-216-817-11 METAL CHIP 470 5% 1/10WR136 1-216-830-11 METAL CHIP 5.6K 5% 1/10W

R137 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR138 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR139 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR140 1-216-833-11 METAL CHIP 10K 5% 1/10WR141 1-216-841-11 METAL CHIP 47K 5% 1/10W

R142 1-216-838-11 METAL CHIP 27K 5% 1/10WR143 1-216-838-11 METAL CHIP 27K 5% 1/10WR145 1-216-833-11 METAL CHIP 10K 5% 1/10WR147 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR148 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R149 1-216-864-11 SHORT CHIP 0R150 1-216-821-11 METAL CHIP 1K 5% 1/10WR151 1-216-833-11 METAL CHIP 10K 5% 1/10WR152 1-216-809-11 METAL CHIP 100 5% 1/10WR153 1-216-864-11 SHORT CHIP 0

R154 1-216-833-11 METAL CHIP 10K 5% 1/10WR155 1-216-833-11 METAL CHIP 10K 5% 1/10WR156 1-216-805-11 METAL CHIP 47 5% 1/10WR157 1-216-797-11 METAL CHIP 10 5% 1/10WR158 1-216-803-11 METAL CHIP 33 5% 1/10W

R159 1-216-864-11 SHORT CHIP 0R160 1-216-841-11 METAL CHIP 47K 5% 1/10WR161 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR162 1-216-857-11 METAL CHIP 1M 5% 1/10WR164 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R165 1-216-841-11 METAL CHIP 47K 5% 1/10WR166 1-216-821-11 METAL CHIP 1K 5% 1/10W

R167 1-216-834-11 METAL CHIP 12K 5% 1/10WR168 1-216-851-11 METAL CHIP 330K 5% 1/10WR169 1-216-812-11 METAL CHIP 180 5% 1/10W

R170 1-216-864-11 SHORT CHIP 0R171 1-216-821-11 METAL CHIP 1K 5% 1/10WR172 1-216-864-11 SHORT CHIP 0R173 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR174 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R175 1-216-819-11 METAL CHIP 680 5% 1/10WR176 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR177 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR178 1-216-851-11 METAL CHIP 330K 5% 1/10WR179 1-216-834-11 METAL CHIP 12K 5% 1/10W

R180 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR181 1-216-833-11 METAL CHIP 10K 5% 1/10WR182 1-216-809-11 METAL CHIP 100 5% 1/10WR183 1-216-809-11 METAL CHIP 100 5% 1/10WR184 1-216-809-11 METAL CHIP 100 5% 1/10W

R185 1-216-809-11 METAL CHIP 100 5% 1/10WR186 1-216-809-11 METAL CHIP 100 5% 1/10WR187 1-216-809-11 METAL CHIP 100 5% 1/10WR188 1-216-809-11 METAL CHIP 100 5% 1/10WR189 1-216-819-11 METAL CHIP 680 5% 1/10W

R190 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR191 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR192 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR193 1-216-833-11 METAL CHIP 10K 5% 1/10WR194 1-216-819-11 METAL CHIP 680 5% 1/10W

R195 1-216-833-11 METAL CHIP 10K 5% 1/10WR196 1-216-833-11 METAL CHIP 10K 5% 1/10WR197 1-216-837-11 METAL CHIP 22K 5% 1/10WR198 1-216-833-11 METAL CHIP 10K 5% 1/10WR199 1-216-845-11 METAL CHIP 100K 5% 1/10W

R200 1-216-841-11 METAL CHIP 47K 5% 1/10WR201 1-216-841-11 METAL CHIP 47K 5% 1/10WR202 1-216-841-11 METAL CHIP 47K 5% 1/10WR203 1-216-841-11 METAL CHIP 47K 5% 1/10WR204 1-216-841-11 METAL CHIP 47K 5% 1/10W

R205 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR206 1-216-833-11 METAL CHIP 10K 5% 1/10WR207 1-216-833-11 METAL CHIP 10K 5% 1/10WR208 1-216-817-11 METAL CHIP 470 5% 1/10WR209 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R210 1-216-864-11 SHORT CHIP 0R211 1-216-857-11 METAL CHIP 1M 5% 1/10WR212 1-216-857-11 METAL CHIP 1M 5% 1/10WR213 1-216-864-11 SHORT CHIP 0R214 1-220-373-11 METAL CHIP 620 5% 1/10W

R215 1-220-373-11 METAL CHIP 620 5% 1/10WR216 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR217 1-216-821-11 METAL CHIP 1K 5% 1/10WR218 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR219 1-216-833-11 METAL CHIP 10K 5% 1/10W

R220 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR221 1-216-821-11 METAL CHIP 1K 5% 1/10WR222 1-216-841-11 METAL CHIP 47K 5% 1/10WR223 1-216-833-11 METAL CHIP 10K 5% 1/10WR224 1-216-833-11 METAL CHIP 10K 5% 1/10W

MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

114

HCD-ZX10D

R225 1-216-821-11 METAL CHIP 1K 5% 1/10WR226 1-216-841-11 METAL CHIP 47K 5% 1/10WR227 1-216-833-11 METAL CHIP 10K 5% 1/10WR228 1-216-833-11 METAL CHIP 10K 5% 1/10WR229 1-216-821-11 METAL CHIP 1K 5% 1/10W

R230 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR231 1-216-841-11 METAL CHIP 47K 5% 1/10WR232 1-216-833-11 METAL CHIP 10K 5% 1/10WR233 1-216-821-11 METAL CHIP 1K 5% 1/10WR234 1-216-833-11 METAL CHIP 10K 5% 1/10W

R235 1-216-833-11 METAL CHIP 10K 5% 1/10WR236 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR237 1-216-821-11 METAL CHIP 1K 5% 1/10WR238 1-216-833-11 METAL CHIP 10K 5% 1/10WR239 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R240 1-216-841-11 METAL CHIP 47K 5% 1/10WR241 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR242 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR243 1-216-841-11 METAL CHIP 47K 5% 1/10WR244 1-216-833-11 METAL CHIP 10K 5% 1/10W

R245 1-216-841-11 METAL CHIP 47K 5% 1/10WR246 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR247 1-216-841-11 METAL CHIP 47K 5% 1/10WR248 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR249 1-216-841-11 METAL CHIP 47K 5% 1/10W

R250 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR251 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR252 1-216-817-11 METAL CHIP 470 5% 1/10WR253 1-216-817-11 METAL CHIP 470 5% 1/10WR254 1-216-821-11 METAL CHIP 1K 5% 1/10W

R255 1-216-833-11 METAL CHIP 10K 5% 1/10WR256 1-216-817-11 METAL CHIP 470 5% 1/10WR257 1-216-833-11 METAL CHIP 10K 5% 1/10WR258 1-216-833-11 METAL CHIP 10K 5% 1/10WR259 1-216-833-11 METAL CHIP 10K 5% 1/10W

R260 1-216-841-11 METAL CHIP 47K 5% 1/10WR261 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR262 1-216-821-11 METAL CHIP 1K 5% 1/10WR263 1-216-833-11 METAL CHIP 10K 5% 1/10WR264 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R265 1-216-821-11 METAL CHIP 1K 5% 1/10WR266 1-216-833-11 METAL CHIP 10K 5% 1/10WR267 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR268 1-216-821-11 METAL CHIP 1K 5% 1/10WR269 1-216-833-11 METAL CHIP 10K 5% 1/10W

R270 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR271 1-216-821-11 METAL CHIP 1K 5% 1/10WR272 1-216-833-11 METAL CHIP 10K 5% 1/10WR273 1-216-821-11 METAL CHIP 1K 5% 1/10WR274 1-216-821-11 METAL CHIP 1K 5% 1/10W

R275 1-216-833-11 METAL CHIP 10K 5% 1/10WR276 1-216-833-11 METAL CHIP 10K 5% 1/10WR277 1-216-833-11 METAL CHIP 10K 5% 1/10WR278 1-216-821-11 METAL CHIP 1K 5% 1/10WR279 1-216-841-11 METAL CHIP 47K 5% 1/10W

R280 1-216-821-11 METAL CHIP 1K 5% 1/10WR281 1-216-845-11 METAL CHIP 100K 5% 1/10WR282 1-216-833-11 METAL CHIP 10K 5% 1/10W

R283 1-216-833-11 METAL CHIP 10K 5% 1/10WR284 1-216-833-11 METAL CHIP 10K 5% 1/10W

R285 1-216-833-11 METAL CHIP 10K 5% 1/10WR286 1-216-841-11 METAL CHIP 47K 5% 1/10WR287 1-216-841-11 METAL CHIP 47K 5% 1/10WR288 1-216-833-11 METAL CHIP 10K 5% 1/10WR289 1-216-833-11 METAL CHIP 10K 5% 1/10W

R290 1-216-833-11 METAL CHIP 10K 5% 1/10WR291 1-216-833-11 METAL CHIP 10K 5% 1/10WR292 1-216-821-11 METAL CHIP 1K 5% 1/10WR293 1-216-821-11 METAL CHIP 1K 5% 1/10WR294 1-216-841-11 METAL CHIP 47K 5% 1/10W

R295 1-216-841-11 METAL CHIP 47K 5% 1/10WR296 1-216-843-11 METAL CHIP 68K 5% 1/10WR297 1-216-835-11 METAL CHIP 15K 5% 1/10WR298 1-216-853-11 METAL CHIP 470K 5% 1/10WR299 1-216-845-11 METAL CHIP 100K 5% 1/10W

R300 1-216-845-11 METAL CHIP 100K 5% 1/10WR301 1-216-841-11 METAL CHIP 47K 5% 1/10WR302 1-216-821-11 METAL CHIP 1K 5% 1/10WR303 1-216-845-11 METAL CHIP 100K 5% 1/10WR304 1-218-285-11 METAL CHIP 75 5% 1/10W

R305 1-216-841-11 METAL CHIP 47K 5% 1/10WR306 1-216-842-11 METAL CHIP 56K 5% 1/10WR307 1-216-835-11 METAL CHIP 15K 5% 1/10WR308 1-216-839-11 METAL CHIP 33K 5% 1/10WR309 1-216-821-11 METAL CHIP 1K 5% 1/10W

R310 1-216-841-11 METAL CHIP 47K 5% 1/10WR311 1-216-809-11 METAL CHIP 100 5% 1/10WR312 1-216-809-11 METAL CHIP 100 5% 1/10WR313 1-216-809-11 METAL CHIP 100 5% 1/10WR314 1-216-797-11 METAL CHIP 10 5% 1/10W

R315 1-216-797-11 METAL CHIP 10 5% 1/10WR316 1-216-809-11 METAL CHIP 100 5% 1/10WR317 1-216-821-11 METAL CHIP 1K 5% 1/10WR318 1-216-809-11 METAL CHIP 100 5% 1/10WR328 1-216-864-11 SHORT CHIP 0

R341 1-216-812-11 METAL CHIP 180 5% 1/10WR391 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR393 1-216-815-11 METAL CHIP 330 5% 1/10W

(E15)R393 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

(AUS)R393 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

(MX)

R393 1-216-864-11 SHORT CHIP 0 (SP, MY)R395 1-216-809-11 METAL CHIP 100 5% 1/10WR397 1-216-833-11 METAL CHIP 10K 5% 1/10WR401 1-216-837-11 METAL CHIP 22K 5% 1/10WR404 1-216-809-11 METAL CHIP 100 5% 1/10W

R409 1-216-833-11 METAL CHIP 10K 5% 1/10WR411 1-216-851-11 METAL CHIP 330K 5% 1/10WR412 1-216-833-11 METAL CHIP 10K 5% 1/10WR413 1-216-864-11 SHORT CHIP 0R417 1-216-833-11 METAL CHIP 10K 5% 1/10W

R419 1-216-809-11 METAL CHIP 100 5% 1/10WR420 1-216-821-11 METAL CHIP 1K 5% 1/10WR421 1-216-809-11 METAL CHIP 100 5% 1/10W

MAIN

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

115

HCD-ZX10D

R422 1-216-809-11 METAL CHIP 100 5% 1/10WR423 1-216-809-11 METAL CHIP 100 5% 1/10W

R424 1-216-809-11 METAL CHIP 100 5% 1/10WR425 1-216-809-11 METAL CHIP 100 5% 1/10WR426 1-216-837-11 METAL CHIP 22K 5% 1/10WR427 1-216-821-11 METAL CHIP 1K 5% 1/10WR428 1-216-813-11 METAL CHIP 220 5% 1/10W

R429 1-216-809-11 METAL CHIP 100 5% 1/10WR430 1-216-809-11 METAL CHIP 100 5% 1/10WR431 1-216-833-11 METAL CHIP 10K 5% 1/10WR432 1-216-809-11 METAL CHIP 100 5% 1/10WR433 1-216-833-11 METAL CHIP 10K 5% 1/10W

(E15, SP, MY)

R434 1-216-833-11 METAL CHIP 10K 5% 1/10WR436 1-216-833-11 METAL CHIP 10K 5% 1/10WR437 1-216-833-11 METAL CHIP 10K 5% 1/10WR439 1-216-833-11 METAL CHIP 10K 5% 1/10WR444 1-216-833-11 METAL CHIP 10K 5% 1/10W

R445 1-216-833-11 METAL CHIP 10K 5% 1/10WR446 1-216-833-11 METAL CHIP 10K 5% 1/10WR447 1-216-833-11 METAL CHIP 10K 5% 1/10WR448 1-216-833-11 METAL CHIP 10K 5% 1/10WR449 1-216-833-11 METAL CHIP 10K 5% 1/10W

R450 1-216-833-11 METAL CHIP 10K 5% 1/10WR451 1-216-833-11 METAL CHIP 10K 5% 1/10WR452 1-216-833-11 METAL CHIP 10K 5% 1/10WR453 1-216-833-11 METAL CHIP 10K 5% 1/10WR454 1-216-833-11 METAL CHIP 10K 5% 1/10W

R465 1-216-809-11 METAL CHIP 100 5% 1/10WR466 1-216-809-11 METAL CHIP 100 5% 1/10WR467 1-216-809-11 METAL CHIP 100 5% 1/10WR468 1-216-809-11 METAL CHIP 100 5% 1/10WR473 1-216-833-11 METAL CHIP 10K 5% 1/10W

R474 1-216-833-11 METAL CHIP 10K 5% 1/10WR475 1-216-833-11 METAL CHIP 10K 5% 1/10WR476 1-216-833-11 METAL CHIP 10K 5% 1/10WR477 1-216-809-11 METAL CHIP 100 5% 1/10WR481 1-216-809-11 METAL CHIP 100 5% 1/10W

R482 1-216-833-11 METAL CHIP 10K 5% 1/10WR486 1-216-833-11 METAL CHIP 10K 5% 1/10WR487 1-216-833-11 METAL CHIP 10K 5% 1/10WR492 1-216-864-11 SHORT CHIP 0R493 1-216-821-11 METAL CHIP 1K 5% 1/10W

(MX)

R493 1-216-829-11 METAL CHIP 4.7K 5% 1/10W(E15, AUS)

R494 1-216-833-11 METAL CHIP 10K 5% 1/10WR500 1-216-815-11 METAL CHIP 330 5% 1/10WR501 1-216-821-11 METAL CHIP 1K 5% 1/10WR502 1-216-821-11 METAL CHIP 1K 5% 1/10W

R503 1-216-821-11 METAL CHIP 1K 5% 1/10WR504 1-216-845-11 METAL CHIP 100K 5% 1/10WR505 1-216-845-11 METAL CHIP 100K 5% 1/10WR506 1-216-821-11 METAL CHIP 1K 5% 1/10WR507 1-216-821-11 METAL CHIP 1K 5% 1/10W

R508 1-216-841-11 METAL CHIP 47K 5% 1/10WR509 1-216-841-11 METAL CHIP 47K 5% 1/10WR510 1-216-854-11 METAL CHIP 560K 5% 1/10W

R511 1-216-854-11 METAL CHIP 560K 5% 1/10WR512 1-216-821-11 METAL CHIP 1K 5% 1/10W

R513 1-216-821-11 METAL CHIP 1K 5% 1/10WR514 1-216-841-11 METAL CHIP 47K 5% 1/10WR515 1-216-841-11 METAL CHIP 47K 5% 1/10WR516 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR517 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R518 1-216-809-11 METAL CHIP 100 5% 1/10WR519 1-216-821-11 METAL CHIP 1K 5% 1/10WR520 1-216-821-11 METAL CHIP 1K 5% 1/10WR521 1-216-845-11 METAL CHIP 100K 5% 1/10WR522 1-216-845-11 METAL CHIP 100K 5% 1/10W

R523 1-216-821-11 METAL CHIP 1K 5% 1/10WR524 1-216-845-11 METAL CHIP 100K 5% 1/10WR525 1-216-845-11 METAL CHIP 100K 5% 1/10WR526 1-216-821-11 METAL CHIP 1K 5% 1/10WR527 1-216-821-11 METAL CHIP 1K 5% 1/10W

R528 1-216-821-11 METAL CHIP 1K 5% 1/10WR529 1-216-821-11 METAL CHIP 1K 5% 1/10WR530 1-216-821-11 METAL CHIP 1K 5% 1/10WR531 1-216-822-11 METAL CHIP 1.2K 5% 1/10WR554 1-216-833-11 METAL CHIP 10K 5% 1/10W

R555 1-216-833-11 METAL CHIP 10K 5% 1/10WR556 1-216-841-11 METAL CHIP 47K 5% 1/10WR557 1-216-841-11 METAL CHIP 47K 5% 1/10WR558 1-216-821-11 METAL CHIP 1K 5% 1/10WR559 1-216-833-11 METAL CHIP 10K 5% 1/10W

R560 1-216-821-11 METAL CHIP 1K 5% 1/10WR561 1-216-833-11 METAL CHIP 10K 5% 1/10WR562 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR563 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR565 1-216-833-11 METAL CHIP 10K 5% 1/10W

R566 1-216-843-11 METAL CHIP 68K 5% 1/10WR567 1-216-843-11 METAL CHIP 68K 5% 1/10WR568 1-216-843-11 METAL CHIP 68K 5% 1/10WR569 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR570 1-216-817-11 METAL CHIP 470 5% 1/10W

R571 1-216-821-11 METAL CHIP 1K 5% 1/10WR572 1-216-835-11 METAL CHIP 15K 5% 1/10WR573 1-216-853-11 METAL CHIP 470K 5% 1/10WR574 1-216-841-11 METAL CHIP 47K 5% 1/10WR575 1-216-853-11 METAL CHIP 470K 5% 1/10W

R576 1-216-853-11 METAL CHIP 470K 5% 1/10WR577 1-216-833-11 METAL CHIP 10K 5% 1/10WR578 1-216-845-11 METAL CHIP 100K 5% 1/10WR579 1-216-833-11 METAL CHIP 10K 5% 1/10WR580 1-216-805-11 METAL CHIP 47 5% 1/10W

R581 1-216-820-11 METAL CHIP 820 5% 1/10WR582 1-216-805-11 METAL CHIP 47 5% 1/10WR583 1-216-820-11 METAL CHIP 820 5% 1/10WR584 1-216-837-11 METAL CHIP 22K 5% 1/10WR585 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R586 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR587 1-216-845-11 METAL CHIP 100K 5% 1/10WR588 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR590 1-216-842-11 METAL CHIP 56K 5% 1/10W

(E15, SP, MY)

MAIN

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

116

HCD-ZX10D

R591 1-216-824-11 METAL CHIP 1.8K 5% 1/10W(E15, SP, MY)

< TRANSFORMER >

T101 1-433-372-11 TRANSFORMER, BIAS OSCILLATION

< VIBRATOR >

X401 1-760-252-12 VIBRATOR, CRYSTAL (32.768kHz)X402 1-795-482-11 VIBRATOR, CERAMIC (16MHz)

************************************************************

MD-94 BOARD************

< CONNECTOR >

CN001 1-506-490-21 PIN, CONNECTOR 11PCN002 1-784-767-11 CONNECTOR, FFC 6P

* CN003 1-564-013-11 PIN, CONNECTOR 3PCN004 1-506-481-11 PIN, CONNECTOR 2P

< SWITCH >

S001 1-786-514-21 SWITCH, LEVER (SLIDE)(TRAY OPEN/CLOSE DETECT)

************************************************************

A-4752-629-A MIC BOARD, COMPLETE (E15, MX, SP, MY)A-4753-359-A MIC BOARD, COMPLETE (AUS)

********************

< CAPACITOR >

C801 1-126-934-11 ELECT 220uF 20% 16VC802 1-126-961-11 ELECT 2.2uF 20% 50VC804 1-164-217-11 CERAMIC CHIP 150PF 5% 50VC805 1-126-964-11 ELECT 10uF 20% 50VC806 1-162-923-11 CERAMIC CHIP 47PF 5% 50V

C807 1-126-961-11 ELECT 2.2uF 20% 50VC808 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC809 1-126-961-11 ELECT 2.2uF 20% 50VC810 1-164-315-11 CERAMIC CHIP 470PF 5% 50VC811 1-162-923-11 CERAMIC CHIP 47PF 5% 50V

C812 1-126-960-11 ELECT 1uF 20% 50VC813 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25VC814 1-126-961-11 ELECT 2.2uF 20% 50VC815 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC817 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C818 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC819 1-126-961-11 ELECT 2.2uF 20% 50VC820 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC821 1-126-960-11 ELECT 1uF 20% 50VC822 1-126-947-11 ELECT 47uF 20% 35V

C823 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25VC824 1-162-969-11 CERAMIC CHIP 0.0068uF 10% 25VC825 1-126-947-11 ELECT 47uF 20% 35VC826 1-136-495-11 FILM 0.068uF 5% 50VC827 1-136-495-11 FILM 0.068uF 5% 50V

C828 1-126-959-11 ELECT 0.47uF 20% 50VC829 1-162-969-11 CERAMIC CHIP 0.0068uF 10% 25VC830 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25VC831 1-126-959-11 ELECT 0.47uF 20% 50V

C832 1-126-960-11 ELECT 1uF 20% 50V

C833 1-136-167-00 FILM 0.15uF 5% 50VC834 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V

< CONNECTOR >

* CN920 1-564-705-11 PIN, CONNECTOR (SMALL TYPE) 3PCN930 1-564-704-11 PIN, CONNECTOR (SMALL TYPE) 2P

< DIODE >

D801 8-719-069-54 DIODE UDZSTE-175.1B

< EARTH TERMINAL >

EPT801 1-537-738-21 TERMINAL, GROUND

< IC >

IC850 8-759-710-97 IC NJM4565M-DIC851 8-759-496-41 IC M65850FP-E1

< JACK >

J801 1-770-226-11 JACK (LARGE TYPE) (MIC 1)J802 1-770-226-11 JACK (LARGE TYPE) (MIC 2)

< RESISTOR >

R800 1-216-864-11 SHORT CHIP 0R801 1-216-845-11 METAL CHIP 100K 5% 1/10WR802 1-216-833-11 METAL CHIP 10K 5% 1/10WR803 1-216-833-11 METAL CHIP 10K 5% 1/10WR804 1-216-809-11 METAL CHIP 100 5% 1/10W

R805 1-216-847-11 METAL CHIP 150K 5% 1/10WR806 1-216-833-11 METAL CHIP 10K 5% 1/10WR807 1-216-809-11 METAL CHIP 100 5% 1/10WR808 1-216-841-11 METAL CHIP 47K 5% 1/10WR809 1-216-821-11 METAL CHIP 1K 5% 1/10W

R810 1-216-845-11 METAL CHIP 100K 5% 1/10WR811 1-216-833-11 METAL CHIP 10K 5% 1/10WR812 1-216-821-11 METAL CHIP 1K 5% 1/10WR813 1-216-821-11 METAL CHIP 1K 5% 1/10WR814 1-216-833-11 METAL CHIP 10K 5% 1/10W

R815 1-216-835-11 METAL CHIP 15K 5% 1/10WR816 1-216-815-11 METAL CHIP 330 5% 1/10WR817 1-216-837-11 METAL CHIP 22K 5% 1/10WR818 1-216-846-11 METAL CHIP 120K 5% 1/10WR819 1-216-837-11 METAL CHIP 22K 5% 1/10W

R820 1-216-837-11 METAL CHIP 22K 5% 1/10WR821 1-216-837-11 METAL CHIP 22K 5% 1/10WR822 1-216-837-11 METAL CHIP 22K 5% 1/10WR823 1-216-837-11 METAL CHIP 22K 5% 1/10WR824 1-216-835-11 METAL CHIP 15K 5% 1/10W

R825 1-216-841-11 METAL CHIP 47K 5% 1/10WR1344 1-216-815-11 METAL CHIP 330 5% 1/10W

< VARIABLE RESISTOR >

RV801 1-227-452-11 RES, VAR, CARBON 50K (MIC LEVEL)RV802 1-227-452-11 RES, VAR, CARBON 50K (ECHO LEVEL)

************************************************************

MAIN MD-94 MIC

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

117

HCD-ZX10D

A-4752-625-A PANEL BOARD, COMPLETE (E15, MX, SP, MY)A-4753-357-A PANEL BOARD, COMPLETE (AUS)

**********************

4-253-178-01 HOLDER FL

< CAPACITOR >

C900 1-126-163-11 ELECT 4.7uF 20% 50VC903 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC904 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC905 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC910 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C916 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC917 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC918 1-126-518-11 ELECT 470uF 20% 4VC919 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC920 1-126-947-11 ELECT 47uF 20% 35V

C921 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25VC922 1-126-964-11 ELECT 10uF 20% 50VC923 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC924 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC925 1-162-959-11 CERAMIC CHIP 330PF 5% 50V

C926 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC927 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC928 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC929 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC930 1-162-959-11 CERAMIC CHIP 330PF 5% 50V

C931 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC932 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC933 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC934 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC935 1-162-959-11 CERAMIC CHIP 330PF 5% 50V

C936 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC937 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC938 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC939 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC940 1-162-959-11 CERAMIC CHIP 330PF 5% 50V

C941 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC942 1-162-959-11 CERAMIC CHIP 330PF 5% 50VC944 1-126-964-11 ELECT 10uF 20% 50VC945 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3VC946 1-164-315-11 CERAMIC CHIP 470PF 5% 50V

C947 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3VC948 1-164-315-11 CERAMIC CHIP 470PF 5% 50VC949 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3VC950 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50VC951 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V

C952 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50VC953 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3VC954 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25VC955 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3VC956 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V

C957 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3VC958 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16VC959 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16VC960 1-126-960-11 ELECT 1uF 20% 50VC961 1-126-963-11 ELECT 4.7uF 20% 50V

C973 1-126-916-11 ELECT 1000uF 20% 6.3V

< CONNECTOR >

CN906 1-569-914-11 S0CKET, CONNECTOR 21PCN908 1-564-721-11 PIN, CONNECTOR (SMALL TYPE) 5PCN913 1-785-341-11 PIN, CONNECTOR (LIGHT ANGLE) 15P

< DIODE >

D900 8-719-404-50 DIODE MA111-TXD901 8-719-404-50 DIODE MA111-TXD902 8-719-404-50 DIODE MA111-TXD903 8-719-404-50 DIODE MA111-TXD904 6-500-508-01 DIODE RR263M-400FTR

D905 8-719-976-99 DIODE DTZ5.1BD906 8-719-060-27 LED SLR-325MCT31 (TUNER/BAND)D927 6-500-508-01 DIODE RR263M-400FTR

< SHORT/FERRITE BEAD >

FB901 1-216-864-11 SHORT CHIP 0 (E15, MX, SP, MY)FB901 1-469-324-21 FERRITE, EMI (SMD) (2012) (AUS)FB931 1-216-864-11 SHORT CHIP 0 (E15, MX, SP, MY)FB931 1-414-760-21 FERRITE, EMI (SMD) (1608) (AUS)

< FLUORESCENT INDICATOR >

FL901 1-518-978-11 VACUUM FLUORESCENT DISPLAYS

< IC >

IC901 6-803-974-01 IC MB90M407PF-G-142-BNDE1IC902 6-600-174-01 IC RPM7240-H4 ( )IC903 6-705-678-01 IC NJM2760V-TE2

< SHORT >

JR916 1-216-864-11 SHORT CHIP 0JR918 1-216-864-11 SHORT CHIP 0JR921 1-216-864-11 SHORT CHIP 0

< TRANSISTOR >

Q901 8-729-027-56 TRANSISTOR DTC143TKA-T146Q902 8-729-027-56 TRANSISTOR DTC143TKA-T146Q903 8-729-027-43 TRANSISTOR DTC114EKA-T146Q904 8-729-903-46 TRANSISTOR 2SB1132-PQ905 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q906 8-729-903-46 TRANSISTOR 2SB1132-PQ908 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R898 1-216-819-11 METAL CHIP 680 5% 1/10WR899 1-216-819-11 METAL CHIP 680 5% 1/10WR900 1-216-833-11 METAL CHIP 10K 5% 1/10WR901 1-216-833-11 METAL CHIP 10K 5% 1/10WR902 1-216-833-11 METAL CHIP 10K 5% 1/10W

R903 1-216-809-11 METAL CHIP 100 5% 1/10WR904 1-216-809-11 METAL CHIP 100 5% 1/10WR905 1-216-835-11 METAL CHIP 15K 5% 1/10WR906 1-216-835-11 METAL CHIP 15K 5% 1/10WR907 1-216-835-11 METAL CHIP 15K 5% 1/10W

R908 1-216-835-11 METAL CHIP 15K 5% 1/10WR909 1-216-835-11 METAL CHIP 15K 5% 1/10W

PANEL

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

118

HCD-ZX10D

R910 1-216-835-11 METAL CHIP 15K 5% 1/10WR911 1-216-864-11 SHORT CHIP 0R912 1-216-833-11 METAL CHIP 10K 5% 1/10W

R913 1-216-864-11 SHORT CHIP 0R914 1-216-833-11 METAL CHIP 10K 5% 1/10WR915 1-216-809-11 METAL CHIP 100 5% 1/10WR916 1-216-821-11 METAL CHIP 1K 5% 1/10WR917 1-216-833-11 METAL CHIP 10K 5% 1/10W

R918 1-216-821-11 METAL CHIP 1K 5% 1/10WR919 1-216-833-11 METAL CHIP 10K 5% 1/10WR922 1-216-857-11 METAL CHIP 1M 5% 1/10WR938 1-216-845-11 METAL CHIP 100K 5% 1/10WR939 1-216-845-11 METAL CHIP 100K 5% 1/10W

R940 1-216-837-11 METAL CHIP 22K 5% 1/10WR941 1-216-809-11 METAL CHIP 100 5% 1/10WR942 1-216-809-11 METAL CHIP 100 5% 1/10WR944 1-216-805-11 METAL CHIP 47 5% 1/10WR945 1-216-841-11 METAL CHIP 47K 5% 1/10W

R946 1-216-843-11 METAL CHIP 68K 5% 1/10WR947 1-216-821-11 METAL CHIP 1K 5% 1/10WR948 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR949 1-216-821-11 METAL CHIP 1K 5% 1/10WR950 1-216-821-11 METAL CHIP 1K 5% 1/10W

R951 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR952 1-216-821-11 METAL CHIP 1K 5% 1/10WR953 1-216-821-11 METAL CHIP 1K 5% 1/10WR954 1-216-833-11 METAL CHIP 10K 5% 1/10WR956 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

R957 1-216-821-11 METAL CHIP 1K 5% 1/10WR958 1-216-819-11 METAL CHIP 680 5% 1/10WR959 1-216-817-11 METAL CHIP 470 5% 1/10WR983 1-216-817-11 METAL CHIP 470 5% 1/10WR984 1-216-819-11 METAL CHIP 680 5% 1/10W

R985 1-216-821-11 METAL CHIP 1K 5% 1/10WR986 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR987 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR988 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR989 1-216-827-11 METAL CHIP 3.3K 5% 1/10W

R990 1-216-817-11 METAL CHIP 470 5% 1/10WR993 1-216-817-11 METAL CHIP 470 5% 1/10WR994 1-216-821-11 METAL CHIP 1K 5% 1/10WR997 1-216-817-11 METAL CHIP 470 5% 1/10WR998 1-216-821-11 METAL CHIP 1K 5% 1/10W

R999 1-216-864-11 SHORT CHIP 0R1350 1-216-837-11 METAL CHIP 22K 5% 1/10WR1351 1-216-821-11 METAL CHIP 1K 5% 1/10WR1352 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

< SWITCH >

S900 1-771-410-21 SWITCH, TACTILE (ILLUMINATION)S901 1-771-410-21 SWITCH, TACTILE (CLOCK TIMER SET)S902 1-771-410-21 SWITCH, TACTILE (CLOCK TIMER SELECT)S903 1-771-410-21 SWITCH, TACTILE (SLEEP)S921 1-771-410-21 SWITCH, TACTILE (TUNER/BAND)

S922 1-771-410-21 SWITCH, TACTILE (TUNING –)S923 1-771-410-21 SWITCH, TACTILE (TUNING +)S924 1-771-410-21 SWITCH, TACTILE (TUNER ENTER)S925 1-771-410-21 SWITCH, TACTILE (MEMORY)

S926 1-771-410-21 SWITCH, TACTILE (FM MODE)

S927 1-771-410-21 SWITCH, TACTILE (TUNING MODE)S928 1-771-410-21 SWITCH, TACTILE (DISPLAY)

< VIBRATOR >

X601 1-781-282-51 VIBRATOR, CERAMIC (4MHz)************************************************************

A-1126-858-A POWER BOARD, COMPLETE (MX)A-4752-643-A POWER BOARD, COMPLETE (E15, SP, MY)A-4753-338-A POWER BOARD, COMPLETE (AUS)

***********************

7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3

< CAPACITOR >

C600 1-126-963-11 ELECT 4.7uF 20% 50VC601 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC602 1-104-665-11 ELECT 100uF 20% 25VC604 1-162-927-11 CERAMIC CHIP 100PF 5% 50VC605 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C608 1-126-965-11 ELECT 22uF 20% 50VC609 1-128-560-11 ELECT 22uF 20% 100VC610 1-128-560-11 ELECT 22uF 20% 100VC616 1-136-495-11 FILM 0.068uF 5% 50VC617 1-136-495-11 FILM 0.068uF 5% 50V

C627 1-126-961-11 ELECT 2.2uF 20% 50VC628 1-126-933-11 ELECT 100uF 20% 16VC629 1-164-156-11 CERAMIC CHIP 0.1uF 25VC634 1-104-665-11 ELECT 100uF 20% 25VC635 1-104-665-11 ELECT 100uF 20% 25V

C636 1-107-721-11 ELECT 4.7uF 20% 100VC637 1-107-721-11 ELECT 4.7uF 20% 100VC648 1-104-665-11 ELECT 100uF 20% 25VC649 1-126-964-11 ELECT 10uF 20% 50VC650 1-126-963-11 ELECT 4.7uF 20% 50V

C651 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC652 1-104-665-11 ELECT 100uF 20% 25VC654 1-162-927-11 CERAMIC CHIP 100PF 5% 50VC655 1-126-964-11 ELECT 10uF 20% 50VC656 1-127-815-11 ELECT 3300uF 20% 100V

C657 1-137-749-11 MYLAR 0.1uF 100VC658 1-127-812-11 ELECT 3300uF 20% 63VC659 1-136-497-81 FILM 0.1uF 5% 50VC662 1-126-964-11 ELECT 10uF 20% 50VC663 1-126-968-11 ELECT 100uF 20% 50V

C666 1-136-495-11 FILM 0.068uF 5% 50VC667 1-136-495-11 FILM 0.068uF 5% 50VC676 1-127-815-11 ELECT 3300uF 20% 100VC677 1-137-749-11 MYLAR 0.1uF 100VC678 1-127-812-11 ELECT 3300uF 20% 63V

C679 1-136-497-81 FILM 0.1uF 5% 50VC690 1-164-156-11 CERAMIC CHIP 0.1uF 25VC691 1-162-974-11 CERAMIC CHIP 0.01uF 50VC692 1-162-974-11 CERAMIC CHIP 0.01uF 50VC693 1-162-974-11 CERAMIC CHIP 0.01uF 50V

C694 1-162-974-11 CERAMIC CHIP 0.01uF 50VC695 1-162-974-11 CERAMIC CHIP 0.01uF 50V

POWERPANEL

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

119

HCD-ZX10D

< CONNECTOR >

CN600 1-564-707-11 PIN, CONNECTOR (SMALL TYPE) 5PCN601 1-778-981-21 CONNECTOR, BOARD TO BOARD 13PCN602 1-778-981-21 CONNECTOR, BOARD TO BOARD 13P

* CN606 1-764-333-11 PLUG, CONNECTOR 10P

< DIODE >

D609 8-719-404-50 DIODE MA111-TXD611 8-719-056-93 DIODE UDZ-TE-17-18BD612 8-719-056-93 DIODE UDZ-TE-17-18BD620 8-719-404-50 DIODE MA111-TXD624 8-719-404-50 DIODE MA111-TX

D627 8-719-404-50 DIODE MA111-TXD646 8-719-404-50 DIODE MA111-TXD654 8-719-404-50 DIODE MA111-TXD655 8-719-404-50 DIODE MA111-TXD656 8-719-073-32 DIODE D25XB60

D658 8-719-073-32 DIODE D25XB60D660 8-719-404-50 DIODE MA111-TXD661 8-719-404-50 DIODE MA111-TXD664 8-719-083-87 DIODE UDZSTE-1733BD670 8-719-404-50 DIODE MA111-TX

< EARTH TERMINAL >

EP605 1-537-738-21 TERMINAL, GROUND

< IC >

IC600 6-600-171-01 IC STK412-230IC627 6-703-610-01 IC RT8H015C-T112-1

< SHORT >

JR647 1-216-864-11 SHORT CHIP 0

< COIL >

L680 1-420-872-52 COIL, AIR-CORE (AUS)L682 1-420-872-52 COIL, AIR-CORE (AUS)L684 1-420-872-52 COIL, AIR-CORE (AUS)L686 1-420-872-52 COIL, AIR-CORE (AUS)L688 1-420-872-52 COIL, AIR-CORE (AUS)

< TRANSISTOR >

Q604 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q606 8-729-821-00 TRANSISTOR 2SA1207Q610 8-729-924-99 TRANSISTOR 2SC3722K-EQ618 8-729-924-99 TRANSISTOR 2SC3722K-EQ628 8-729-120-28 TRANSISTOR 2SC1623-L5L6

Q629 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q630 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q634 8-729-027-31 TRANSISTOR DTA124EKA-T146Q635 8-729-027-43 TRANSISTOR DTC114EKA-T146Q640 8-729-802-80 TRANSISTOR 2SC3661

Q641 8-729-802-80 TRANSISTOR 2SC3661Q644 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q647 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q648 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q664 8-729-024-93 TRANSISTOR 2SB1565E

Q668 8-729-924-99 TRANSISTOR 2SC3722K-E

< RESISTOR >

R600 1-216-821-11 METAL CHIP 1K 5% 1/10WR601 1-216-841-11 METAL CHIP 47K 5% 1/10WR602 1-216-813-11 METAL CHIP 220 5% 1/10WR603 1-216-841-11 METAL CHIP 47K 5% 1/10WR604 1-216-833-11 METAL CHIP 10K 5% 1/10W

R605 1-216-833-11 METAL CHIP 10K 5% 1/10WR606 1-216-841-11 METAL CHIP 47K 5% 1/10WR607 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR608 1-216-845-11 METAL CHIP 100K 5% 1/10WR609 1-216-843-11 METAL CHIP 68K 5% 1/10W

R610 1-216-843-11 METAL CHIP 68K 5% 1/10WR611 1-216-839-11 METAL CHIP 33K 5% 1/10W

0R612 1-245-605-51 FUSIBLE 100 5% 1/4W F0R613 1-215-869-11 METAL OXIDE 1K 5% 1W F0R614 1-215-869-11 METAL OXIDE 1K 5% 1W F

0R615 1-245-605-51 FUSIBLE 100 5% 1/4W F0R616 1-217-637-00 FUSIBLE 1 5% 1/4W F

R617 1-216-845-11 METAL CHIP 100K 5% 1/10W0R618 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F

R619 1-216-821-11 METAL CHIP 1K 5% 1/10W

R620 1-216-835-11 METAL CHIP 15K 5% 1/10WR621 1-216-847-11 METAL CHIP 150K 5% 1/10WR622 1-245-711-31 CARBON 10 5% 1/2WR623 1-216-842-11 METAL CHIP 56K 5% 1/10WR624 1-216-837-11 METAL CHIP 22K 5% 1/10W

R625 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR626 1-216-845-11 METAL CHIP 100K 5% 1/10WR628 1-216-839-11 METAL CHIP 33K 5% 1/10WR629 1-216-809-11 METAL CHIP 100 5% 1/10WR630 1-216-845-11 METAL CHIP 100K 5% 1/10W

R631 1-216-845-11 METAL CHIP 100K 5% 1/10WR632 1-216-854-11 METAL CHIP 560K 5% 1/10WR633 1-216-841-11 METAL CHIP 47K 5% 1/10WR634 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR635 1-216-833-11 METAL CHIP 10K 5% 1/10W

0R636 1-215-891-11 METAL OXIDE 680 5% 2W F0R637 1-215-891-11 METAL OXIDE 680 5% 2W F

R638 1-216-845-11 METAL CHIP 100K 5% 1/10WR639 1-216-845-11 METAL CHIP 100K 5% 1/10WR640 1-216-833-11 METAL CHIP 10K 5% 1/10W

R641 1-216-833-11 METAL CHIP 10K 5% 1/10WR642 1-216-806-11 METAL CHIP 56 5% 1/10WR643 1-216-806-11 METAL CHIP 56 5% 1/10WR644 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

0R646 1-215-863-11 METAL OXIDE 100 5% 1W F

R647 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR649 1-216-834-11 METAL CHIP 12K 5% 1/10WR650 1-216-821-11 METAL CHIP 1K 5% 1/10WR651 1-216-841-11 METAL CHIP 47K 5% 1/10WR652 1-216-813-11 METAL CHIP 220 5% 1/10W

R653 1-216-841-11 METAL CHIP 47K 5% 1/10WR654 1-216-841-11 METAL CHIP 47K 5% 1/10WR655 1-216-841-11 METAL CHIP 47K 5% 1/10WR656 1-216-849-11 METAL CHIP 220K 5% 1/10WR657 1-216-849-11 METAL CHIP 220K 5% 1/10W

POWER

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

120

HCD-ZX10D

R658 1-216-849-11 METAL CHIP 220K 5% 1/10WR659 1-216-849-11 METAL CHIP 220K 5% 1/10WR660 1-216-834-11 METAL CHIP 12K 5% 1/10WR661 1-216-834-11 METAL CHIP 12K 5% 1/10WR662 1-216-832-11 METAL CHIP 8.2K 5% 1/10W

R663 1-216-832-11 METAL CHIP 8.2K 5% 1/10WR664 1-216-821-11 METAL CHIP 1K 5% 1/10WR665 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

0R668 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W FR669 1-216-821-11 METAL CHIP 1K 5% 1/10W

R670 1-216-835-11 METAL CHIP 15K 5% 1/10WR671 1-216-847-11 METAL CHIP 150K 5% 1/10WR672 1-245-711-31 CARBON 10 5% 1/2WR673 1-216-843-11 METAL CHIP 68K 5% 1/10WR674 1-216-837-11 METAL CHIP 22K 5% 1/10W

R676 1-216-849-11 METAL CHIP 220K 5% 1/10WR677 1-216-849-11 METAL CHIP 220K 5% 1/10WR678 1-216-849-11 METAL CHIP 220K 5% 1/10WR679 1-216-849-11 METAL CHIP 220K 5% 1/10WR680 1-249-625-31 CARBON 10 5% 1/2W

(AUS)

R682 1-249-625-31 CARBON 10 5% 1/2W(AUS)

R684 1-249-625-31 CARBON 10 5% 1/2W(AUS)

R686 1-249-625-31 CARBON 10 5% 1/2W(AUS)

R688 1-249-625-31 CARBON 10 5% 1/2W(AUS)

R690 1-216-841-11 METAL CHIP 47K 5% 1/10W

R691 1-216-845-11 METAL CHIP 100K 5% 1/10WR692 1-216-845-11 METAL CHIP 100K 5% 1/10WR693 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR694 1-216-843-11 METAL CHIP 68K 5% 1/10WR698 1-216-845-11 METAL CHIP 100K 5% 1/10W

R699 1-216-845-11 METAL CHIP 100K 5% 1/10W

< RELAY >

RY646 1-755-500-11 RELAY

< TERMINAL >

TM608 1-694-656-21 TERMINAL BOARD (6CH SPEAKER)(SPEAKER FRONT/SURR/CENTER)

************************************************************

POWER SW BOARD****************

< LED >

D920 8-719-053-43 LED SLR-325VCT31 (STANDBY)

< TRANSISTOR >

Q900 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R1338 1-216-819-11 METAL CHIP 680 5% 1/10WR1341 1-216-809-11 METAL CHIP 100 5% 1/10WR1342 1-216-817-11 METAL CHIP 470 5% 1/10W

< SWITCH >

S929 1-771-410-21 SWITCH, TACTILE (I/1)************************************************************

A-4728-690-A RF BOARD, COMPLETE*******************

< CAPACITOR >

C001 1-126-206-11 ELECT CHIP 100uF 20% 6.3VC002 1-124-779-00 ELECT CHIP 10uF 20% 16VC003 1-126-206-11 ELECT CHIP 100uF 20% 6.3VC004 1-124-779-00 ELECT CHIP 10uF 20% 16VC005 1-128-993-21 ELECT CHIP 22uF 20% 10V

C006 1-128-993-21 ELECT CHIP 22uF 20% 10VC008 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC009 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC010 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25VC011 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25V

C012 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC013 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC014 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC015 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC016 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V

C017 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC018 1-164-172-11 CERAMIC CHIP 0.0056uF 10% 25VC019 1-164-172-11 CERAMIC CHIP 0.0056uF 10% 25VC020 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC021 1-162-919-11 CERAMIC CHIP 22PF 5% 50V

C022 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC023 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC024 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC025 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC026 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C027 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC028 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC029 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC030 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC031 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25V

C032 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16VC033 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC034 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC035 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC036 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10V

C037 1-115-412-11 CERAMIC CHIP 680PF 5% 25VC038 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16VC039 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16VC040 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC041 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

C042 1-164-218-11 CERAMIC CHIP 180PF 5% 50VC049 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC050 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50VC051 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10VC052 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

< CONNECTOR >

CN001 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24PCN002 1-784-836-21 CONNECTOR, FFC (LIF (NON-ZIF)) 29P

POWER

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

POWER SW RF

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

121

HCD-ZX10D

CN003 1-784-861-21 CONNECTOR, FFC (LIF (NON-ZIF)) 9P

< DIODE >

D001 8-719-988-61 DIODE 1SS355TE-17D002 8-719-988-61 DIODE 1SS355TE-17

< IC >

IC001 6-703-922-01 IC SP3723CAF0PMIC003 6-703-921-01 IC TL343IDBVR

< COIL >

L001 1-412-031-11 INDUCTOR 47uHL002 1-412-031-11 INDUCTOR 47uH

< TRANSISTOR >

Q001 8-729-903-46 TRANSISTOR 2SB1132-PQ002 8-729-903-46 TRANSISTOR 2SB1132-P

< RESISTOR >

R001 1-218-668-11 METAL CHIP 100 0.5% 1/10WR003 1-216-803-11 METAL CHIP 33 5% 1/10WR004 1-216-803-11 METAL CHIP 33 5% 1/10WR005 1-216-841-11 METAL CHIP 47K 5% 1/10WR006 1-216-817-11 METAL CHIP 470 5% 1/10W

R007 1-216-803-11 METAL CHIP 33 5% 1/10WR008 1-216-803-11 METAL CHIP 33 5% 1/10WR009 1-216-841-11 METAL CHIP 47K 5% 1/10WR010 1-216-817-11 METAL CHIP 470 5% 1/10WR011 1-216-864-11 SHORT CHIP 0

R012 1-216-864-11 SHORT CHIP 0R013 1-216-864-11 SHORT CHIP 0R014 1-216-864-11 SHORT CHIP 0R015 1-216-864-11 SHORT CHIP 0R016 1-216-864-11 SHORT CHIP 0

R017 1-216-864-11 SHORT CHIP 0R018 1-216-864-11 SHORT CHIP 0R019 1-216-864-11 SHORT CHIP 0R020 1-216-864-11 SHORT CHIP 0R021 1-216-864-11 SHORT CHIP 0

R022 1-216-813-11 METAL CHIP 220 5% 1/10WR023 1-216-820-11 METAL CHIP 820 5% 1/10WR024 1-216-864-11 SHORT CHIP 0R025 1-216-809-11 METAL CHIP 100 5% 1/10WR026 1-218-718-11 METAL CHIP 12K 0.5% 1/10W

R027 1-216-864-11 SHORT CHIP 0R028 1-216-864-11 SHORT CHIP 0R029 1-216-864-11 SHORT CHIP 0R031 1-216-809-11 METAL CHIP 100 5% 1/10WR033 1-216-845-11 METAL CHIP 100K 5% 1/10W

R034 1-216-817-11 METAL CHIP 470 5% 1/10WR035 1-216-864-11 SHORT CHIP 0R041 1-216-821-11 METAL CHIP 1K 5% 1/10WR046 1-216-833-11 METAL CHIP 10K 5% 1/10WR047 1-216-839-11 METAL CHIP 33K 5% 1/10W

R091 1-218-913-11 METAL CHIP 560K 0.5% 1/10W************************************************************

A-6060-642-A SE-130 BOARD, COMPLETE**********************

< CONNECTOR >

CN101 1-750-243-11 SOCKET, CONNECTOR 6PCN102 1-573-383-11 PIN, CONNECTOR (PC BOARD) 2P

< PHOTO SENSOR/IC >

PH101 8-749-017-45 SENSOR, PHOTO RPR-220C1NPH102 6-600-072-01 IC RPI-392

************************************************************

SENSOR BOARD**************

< CONNECTOR >

CN605 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P

< THERMISTOR >

TH630 1-807-796-11 THERMISTOR************************************************************

A-4752-634-A SURROUND BOARD, COMPLETE(E15, MX, SP, MY)

A-4753-341-A SURROUND BOARD, COMPLETE (AUS)**************************

< CAPACITOR >

C700 1-126-963-11 ELECT 4.7uF 20% 50VC701 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC702 1-104-665-11 ELECT 100uF 20% 25VC703 1-162-927-11 CERAMIC CHIP 100PF 5% 50VC721 1-126-965-11 ELECT 22uF 20% 50V

C730 1-136-495-11 FILM 0.068uF 5% 50VC731 1-136-495-11 FILM 0.068uF 5% 50VC740 1-126-963-11 ELECT 4.7uF 20% 50VC741 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC742 1-104-665-11 ELECT 100uF 20% 25V

C743 1-162-927-11 CERAMIC CHIP 100PF 5% 50VC750 1-126-963-11 ELECT 4.7uF 20% 50VC751 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50VC752 1-104-665-11 ELECT 100uF 20% 25VC753 1-162-927-11 CERAMIC CHIP 100PF 5% 50V

C770 1-136-495-11 FILM 0.068uF 5% 50VC771 1-136-495-11 FILM 0.068uF 5% 50VC780 1-136-495-11 FILM 0.068uF 5% 50VC781 1-136-495-11 FILM 0.068uF 5% 50VC791 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

C792 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25VC795 1-128-560-11 ELECT 22uF 20% 100VC796 1-128-560-11 ELECT 22uF 20% 100V

< DIODE >

D720 8-719-404-50 DIODE MA111-TXD730 8-719-404-50 DIODE MA111-TXD760 8-719-404-50 DIODE MA111-TXD761 8-719-404-50 DIODE MA111-TXD762 8-719-404-50 DIODE MA111-TX

SURROUNDSENSORSE-130RF

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

122

HCD-ZX10D

D770 8-719-404-50 DIODE MA111-TXD780 8-719-404-50 DIODE MA111-TXD790 8-719-056-93 DIODE UDZ-TE-17-18BD791 8-719-056-93 DIODE UDZ-TE-17-18B

< EARTH TERMINAL >

EP790 1-537-738-21 TERMINAL, GROUND

< IC >

IC701 6-600-339-01 IC STK413-430

< TRANSISTOR >

Q720 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q721 8-729-821-00 TRANSISTOR 2SA1207Q722 8-729-924-99 TRANSISTOR 2SC3722K-EQ730 8-729-924-99 TRANSISTOR 2SC3722K-EQ762 8-729-120-28 TRANSISTOR 2SC1623-L5L6

Q763 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q764 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q765 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q770 8-729-924-99 TRANSISTOR 2SC3722K-EQ780 8-729-924-99 TRANSISTOR 2SC3722K-E

< RESISTOR >

R700 1-216-821-11 METAL CHIP 1K 5% 1/10WR701 1-216-841-11 METAL CHIP 47K 5% 1/10WR702 1-216-813-11 METAL CHIP 220 5% 1/10WR710 1-216-841-11 METAL CHIP 47K 5% 1/10WR711 1-216-841-11 METAL CHIP 47K 5% 1/10W

R712 1-216-841-11 METAL CHIP 47K 5% 1/10WR720 1-216-833-11 METAL CHIP 10K 5% 1/10WR721 1-216-833-11 METAL CHIP 10K 5% 1/10WR722 1-216-841-11 METAL CHIP 47K 5% 1/10WR723 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R724 1-216-845-11 METAL CHIP 100K 5% 1/10WR725 1-216-843-11 METAL CHIP 68K 5% 1/10WR726 1-216-843-11 METAL CHIP 68K 5% 1/10WR727 1-216-839-11 METAL CHIP 33K 5% 1/10WR728 1-216-841-11 METAL CHIP 47K 5% 1/10W

R729 1-216-845-11 METAL CHIP 100K 5% 1/10W0R730 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F

R731 1-216-821-11 METAL CHIP 1K 5% 1/10WR732 1-216-835-11 METAL CHIP 15K 5% 1/10WR733 1-216-847-11 METAL CHIP 150K 5% 1/10W

R734 1-216-842-11 METAL CHIP 56K 5% 1/10WR735 1-245-711-31 CARBON 10 5% 1/2WR736 1-216-843-11 METAL CHIP 68K 5% 1/10WR737 1-216-845-11 METAL CHIP 100K 5% 1/10WR740 1-216-821-11 METAL CHIP 1K 5% 1/10W

R741 1-216-841-11 METAL CHIP 47K 5% 1/10WR742 1-216-813-11 METAL CHIP 220 5% 1/10WR750 1-216-821-11 METAL CHIP 1K 5% 1/10WR751 1-216-841-11 METAL CHIP 47K 5% 1/10WR752 1-216-813-11 METAL CHIP 220 5% 1/10W

0R764 1-215-863-11 METAL OXIDE 100 5% 1W F0R765 1-215-863-11 METAL OXIDE 100 5% 1W F

R766 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR768 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

0R770 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F

R771 1-216-821-11 METAL CHIP 1K 5% 1/10WR772 1-216-835-11 METAL CHIP 15K 5% 1/10WR773 1-216-847-11 METAL CHIP 150K 5% 1/10WR774 1-216-841-11 METAL CHIP 47K 5% 1/10WR775 1-245-711-31 CARBON 10 5% 1/2W

0R780 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W FR781 1-216-821-11 METAL CHIP 1K 5% 1/10WR782 1-216-835-11 METAL CHIP 15K 5% 1/10WR783 1-216-847-11 METAL CHIP 150K 5% 1/10WR784 1-216-843-11 METAL CHIP 68K 5% 1/10W

R785 1-245-711-31 CARBON 10 5% 1/2WR788 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR790 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR792 1-216-845-11 METAL CHIP 100K 5% 1/10W

0R793 1-217-637-00 FUSIBLE 1 5% 1/4W F

0R794 1-245-605-51 FUSIBLE 100 5% 1/4W F0R795 1-245-605-51 FUSIBLE 100 5% 1/4W F0R796 1-215-869-11 METAL OXIDE 1K 5% 1W F0R797 1-215-869-11 METAL OXIDE 1K 5% 1W F

R798 1-216-845-11 METAL CHIP 100K 5% 1/10W

R799 1-216-845-11 METAL CHIP 100K 5% 1/10W

< RELAY >

RY760 1-755-500-11 RELAYRY761 1-755-372-11 RELAY

************************************************************

TC-A BOARD***********

< CONNECTOR >

CN914 1-785-329-11 PIN, CONNECTOR (LIGHT ANGLE) 3PCN915 1-785-333-11 PIN, CONNECTOR (LIGHT ANGLE) 7P

< LED >

D918 8-719-060-27 LED SLR-325MCT31 (h)D919 8-719-060-27 LED SLR-325MCT31 (H)

< SHORT >

JR903 1-216-864-11 SHORT CHIP 0

< TRANSISTOR >

Q907 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R833 1-216-819-11 METAL CHIP 680 5% 1/10WR835 1-216-819-11 METAL CHIP 680 5% 1/10WR837 1-216-833-11 METAL CHIP 10K 5% 1/10WR840 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR842 1-216-809-11 METAL CHIP 100 5% 1/10W

R843 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR844 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR845 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR846 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

SURROUND TC-A

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

123

HCD-ZX10D

< SWITCH >

S931 1-771-410-21 SWITCH, TACTILE (. m)S932 1-771-410-21 SWITCH, TACTILE (M >)S933 1-771-410-21 SWITCH, TACTILE (DIRECTION)S934 1-771-410-21 SWITCH, TACTILE (x)S935 1-771-410-21 SWITCH, TACTILE (h)

S936 1-771-410-21 SWITCH, TACTILE (H)************************************************************

A-4751-063-A TC-B BOARD, COMPLETE********************

< CONNECTOR >

CN905 1-785-331-11 PIN, CONNECTOR (LIGHT ANGLE) 5PCN916 1-785-335-11 PIN, CONNECTOR (LIGHT ANGLE) 9P

< LED >

D921 8-719-060-27 LED SLR-325MCT31 (GAME)D922 8-719-053-43 LED SLR-325VCT31 (REC PAUSE/START)D923 8-719-060-27 LED SLR-325MCT31 (h)D924 8-719-060-27 LED SLR-325MCT31 (H)

< SHORT >

JR907 1-216-864-11 SHORT CHIP 0JR908 1-216-864-11 SHORT CHIP 0

< TRANSISTOR >

Q909 8-729-027-43 TRANSISTOR DTC114EKA-T146Q910 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R847 1-216-819-11 METAL CHIP 680 5% 1/10WR848 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR849 1-216-819-11 METAL CHIP 680 5% 1/10WR850 1-216-809-11 METAL CHIP 100 5% 1/10WR852 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

R855 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR857 1-216-819-11 METAL CHIP 680 5% 1/10WR858 1-216-821-11 METAL CHIP 1K 5% 1/10WR859 1-216-819-11 METAL CHIP 680 5% 1/10WR860 1-216-809-11 METAL CHIP 100 5% 1/10W

R861 1-216-819-11 METAL CHIP 680 5% 1/10WR864 1-216-817-11 METAL CHIP 470 5% 1/10WR868 1-216-835-11 METAL CHIP 15K 5% 1/10WR869 1-216-833-11 METAL CHIP 10K 5% 1/10WR870 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W

< SWITCH >

S940 1-771-410-21 SWITCH, TACTILE (REC PAUSE/START)S941 1-771-410-21 SWITCH, TACTILE (GAME)S942 1-771-410-21 SWITCH, TACTILE (GAME MIXING)S943 1-771-410-21 SWITCH, TACTILE (CD SYNC)S944 1-771-410-21 SWITCH, TACTILE (M >)

S945 1-771-410-21 SWITCH, TACTILE (. m)S947 1-771-410-21 SWITCH, TACTILE (x)S948 1-771-410-21 SWITCH, TACTILE (h)S949 1-771-410-21 SWITCH, TACTILE (H)

************************************************************

1-861-385-11 TRANS BOARD************

1-533-217-41 HOLDER, FUSE

< CAPACITOR >

C1192 1-128-576-11 ELECT 100uF 20% 63V

< CONNECTOR >

* CN1112 1-564-521-11 PLUG, CONNECTOR 6P* CN1113 1-564-522-11 PLUG, CONNECTOR 7P

< DIODE >

D1192 6-500-522-21 DIODE 10EDB40-TB3

< RESISTOR >

0R1192 1-219-124-11 FUSIBLE 0.68 5% 1/4W F************************************************************

A-1066-611-A VIDEO BOARD, COMPLETE**********************

< CAPACITOR >

C1200 1-162-953-11 CERAMIC CHIP 100PF 5% 50VC1201 1-126-964-11 ELECT 10uF 20% 50VC1202 1-126-964-11 ELECT 10uF 20% 50VC1203 1-164-156-11 CERAMIC CHIP 0.1uF 25VC1204 1-104-665-11 ELECT 100uF 20% 25V

C1205 1-126-960-11 ELECT 1uF 20% 50VC1206 1-126-960-11 ELECT 1uF 20% 50VC1207 1-126-960-11 ELECT 1uF 20% 50VC1208 1-126-960-11 ELECT 1uF 20% 50VC1209 1-126-960-11 ELECT 1uF 20% 50V

C1210 1-126-960-11 ELECT 1uF 20% 50VC1211 1-104-665-11 ELECT 100uF 20% 25VC1212 1-164-156-11 CERAMIC CHIP 0.1uF 25VC1213 1-126-916-11 ELECT 1000uF 20% 6.3VC1214 1-126-916-11 ELECT 1000uF 20% 6.3V

C1215 1-126-916-11 ELECT 1000uF 20% 6.3VC1216 1-126-916-11 ELECT 1000uF 20% 6.3VC1217 1-126-916-11 ELECT 1000uF 20% 6.3VC1218 1-126-916-11 ELECT 1000uF 20% 6.3VC1219 1-162-919-11 CERAMIC CHIP 22PF 5% 50V

C1220 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC1221 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC1222 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC1223 1-162-919-11 CERAMIC CHIP 22PF 5% 50VC1224 1-162-919-11 CERAMIC CHIP 22PF 5% 50V

C1225 1-164-156-11 CERAMIC CHIP 0.1uF 25VC1226 1-126-965-11 ELECT 22uF 20% 50VC1228 1-216-864-11 SHORT CHIP 0C1230 1-216-864-11 SHORT CHIP 0C1231 1-126-916-11 ELECT 1000uF 20% 6.3V

< CONNECTOR >

CN1200 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2PCN1201 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P

VIDEOTRANSTC-BTC-A

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

124

HCD-ZX10D

CN1202 1-793-599-11 CONNECTOR, FFC/FPC (ZIF) 17P

< SHORT/FERRITE BEAD >

FB1200 1-216-864-11 SHORT CHIP 0FB1201 1-216-864-11 SHORT CHIP 0FB1202 1-216-864-11 SHORT CHIP 0FB1203 1-216-864-11 SHORT CHIP 0FB1204 1-216-864-11 SHORT CHIP 0

FB1205 1-216-864-11 SHORT CHIP 0FB1206 1-500-284-21 INDUCTOR, FERRITE BEAD

< IC >

IC1200 8-759-295-90 IC NJM2244M-TE2IC1201 6-705-602-01 IC MM1623BFBE

< JACK/TERMINAL >

J1200 1-793-483-11 PHONO JACK 3P (COMPONENT VIDEO)J1201 1-794-970-11 JACK, PIN 1P (VIDEO OUT)J1202 1-537-943-11 TERMINAL, S (S VIDEO OUT)

< SHORT/FERRITE BEAD >

JR1202 1-216-864-11 SHORT CHIP 0JR1203 1-216-864-11 SHORT CHIP 0JR1204 1-216-864-11 SHORT CHIP 0JR1205 1-500-284-21 INDUCTOR, FERRITE BEADJR1208 1-216-864-11 SHORT CHIP 0

JR1209 1-216-864-11 SHORT CHIP 0JR1210 1-216-864-11 SHORT CHIP 0JR1211 1-216-864-11 SHORT CHIP 0

< TRANSISTOR >

Q1200 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R1200 1-216-833-11 METAL CHIP 10K 5% 1/10WR1201 1-216-833-11 METAL CHIP 10K 5% 1/10WR1202 1-218-285-11 METAL CHIP 75 5% 1/10WR1203 1-218-285-11 METAL CHIP 75 5% 1/10WR1204 1-218-285-11 METAL CHIP 75 5% 1/10W

R1205 1-218-285-11 METAL CHIP 75 5% 1/10WR1206 1-218-285-11 METAL CHIP 75 5% 1/10WR1207 1-216-833-11 METAL CHIP 10K 5% 1/10WR1208 1-218-285-11 METAL CHIP 75 5% 1/10WR1210 1-216-809-11 METAL CHIP 100 5% 1/10W

R1223 1-216-833-11 METAL CHIP 10K 5% 1/10WR1231 1-216-857-11 METAL CHIP 1M 5% 1/10WR1232 1-216-807-11 METAL CHIP 68 5% 1/10WR1233 1-216-845-11 METAL CHIP 100K 5% 1/10W

************************************************************

A-4752-627-A VOL BOARD, COMPLETE********************

< CAPACITOR >

C967 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC968 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC969 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16VC971 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V

< CONNECTOR >

CN928 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P

< LED >

D907 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 1)D908 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 2)D909 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 3)D910 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 4)D911 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 5)

D912 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 6)D913 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 7)D914 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 8)D915 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 9)D916 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 10)

D917 6-500-424-01 LED SLI-325DCT31W (VOLUME LEVEL 11)

< SHORT >

JR909 1-216-864-11 SHORT CHIP 0JR910 1-216-864-11 SHORT CHIP 0JR911 1-216-864-11 SHORT CHIP 0JR912 1-216-864-11 SHORT CHIP 0JR913 1-216-864-11 SHORT CHIP 0

< TRANSISTOR >

Q911 8-729-027-43 TRANSISTOR DTC114EKA-T146Q912 8-729-027-43 TRANSISTOR DTC114EKA-T146Q913 8-729-027-43 TRANSISTOR DTC114EKA-T146Q914 8-729-027-43 TRANSISTOR DTC114EKA-T146Q915 8-729-027-43 TRANSISTOR DTC114EKA-T146

< RESISTOR >

R960 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR961 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR962 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR963 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR964 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

R965 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR966 1-216-821-11 METAL CHIP 1K 5% 1/10WR967 1-216-819-11 METAL CHIP 680 5% 1/10WR968 1-216-817-11 METAL CHIP 470 5% 1/10WR969 1-216-817-11 METAL CHIP 470 5% 1/10W

R970 1-216-819-11 METAL CHIP 680 5% 1/10WR971 1-216-821-11 METAL CHIP 1K 5% 1/10WR972 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR973 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR974 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R975 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR976 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR1300 1-216-821-11 METAL CHIP 1K 5% 1/10WR1301 1-216-809-11 METAL CHIP 100 5% 1/10WR1302 1-216-821-11 METAL CHIP 1K 5% 1/10W

R1303 1-216-821-11 METAL CHIP 1K 5% 1/10WR1306 1-216-821-11 METAL CHIP 1K 5% 1/10WR1308 1-216-809-11 METAL CHIP 100 5% 1/10WR1309 1-216-821-11 METAL CHIP 1K 5% 1/10WR1310 1-216-821-11 METAL CHIP 1K 5% 1/10W

R1313 1-216-821-11 METAL CHIP 1K 5% 1/10W

VIDEO VOL

Ver. 1.1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

125

HCD-ZX10D

R1315 1-216-809-11 METAL CHIP 100 5% 1/10WR1316 1-216-821-11 METAL CHIP 1K 5% 1/10WR1317 1-216-821-11 METAL CHIP 1K 5% 1/10WR1320 1-216-821-11 METAL CHIP 1K 5% 1/10W

R1322 1-216-809-11 METAL CHIP 100 5% 1/10WR1323 1-216-821-11 METAL CHIP 1K 5% 1/10WR1324 1-216-821-11 METAL CHIP 1K 5% 1/10WR1327 1-216-821-11 METAL CHIP 1K 5% 1/10WR1329 1-216-809-11 METAL CHIP 100 5% 1/10W

R1330 1-216-821-11 METAL CHIP 1K 5% 1/10WR1331 1-216-821-11 METAL CHIP 1K 5% 1/10WR1335 1-216-821-11 METAL CHIP 1K 5% 1/10WR1336 1-216-821-11 METAL CHIP 1K 5% 1/10WR1337 1-216-821-11 METAL CHIP 1K 5% 1/10W

< SWITCH/ROTARY ENCODER >

S904 1-771-410-21 SWITCH, TACTILE (SALSA)S905 1-771-410-21 SWITCH, TACTILE (REGGAE)S906 1-771-410-21 SWITCH, TACTILE (POP)S907 1-771-410-21 SWITCH, TACTILE (SAMBA)S908 1-771-410-21 SWITCH, TACTILE (TANGO)

S909 1-771-410-21 SWITCH, TACTILE (SOUND FIELD)S910 1-771-410-21 SWITCH, TACTILE (P FILE)S911 1-771-410-21 SWITCH, TACTILE (X-GROOVE)S912 1-771-410-21 SWITCH, TACTILE (EFFECT ON/OFF)S913 1-771-410-21 SWITCH, TACTILE (ROCK)

S914 1-771-410-21 SWITCH, TACTILE (JAZZ)S915 1-771-410-21 SWITCH, TACTILE (DANCE)S916 1-771-410-21 SWITCH, TACTILE (MOVIE)S917 1-771-410-21 SWITCH, TACTILE (GAME)S918 1-771-410-21 SWITCH, TACTILE (DVD TOP MENU)

S919 1-771-410-21 SWITCH, TACTILE (DVD MENU)S920 1-771-410-21 SWITCH, TACTILE (AMP MENU)S975 1-418-725-51 ENCODER, ROTARY (12 TYPE) (VOLUME)

************************************************************

1-861-384-11 VOLTAGE SELECTOR BOARD***********************

< CAPACITOR >

C1001 1-164-156-11 CERAMIC CHIP 0.1uF 25VC1002 1-164-156-11 CERAMIC CHIP 0.1uF 25VC1004 1-164-156-11 CERAMIC CHIP 0.1uF 25VC1006 1-126-916-11 ELECT 1000uF 20% 6.3V

< CONNECTOR >

CN1000 1-785-329-11 PIN, CONNECTOR (LIGHT ANGLE) 3PCN1002 1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2PCN1004 1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2P

(MX, AUS)CN1004 1-568-106-11 PIN, CONNECTOR (3.96mm PITCH) 4P

(E15, SP, MY)

< DIODE >

D1000 8-719-404-50 DIODE MA111-TX

< SHORT >

JR1002 1-216-864-11 SHORT CHIP 0

< COIL >

L1001 1-410-666-31 INDUCTOR 18uH

< TRANSISTOR >

Q1000 8-729-120-28 TRANSISTOR 2SC1623-L5L6

< RESISTOR >

R1000 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR1001 1-216-845-11 METAL CHIP 100K 5% 1/10W

< RELAY >

0RY1000 1-755-299-11 RELAY

< SWITCH >

0S1000 1-771-291-31 SWITCH, POWER (E15, SP, MY)(VOLTAGE SELECTOR)

************************************************************

MISCELLANEOUS**************

5 1-769-992-11 WIRE (FLAT TYPE) (13 CORE)6 1-796-487-51 DECK, MECHANICAL (CWM43RR35)57 1-773-163-11 WIRE (FLAT TYPE) (21 CORE)202 1-693-603-31 TUNER (FM/AM)203 1-769-939-11 WIRE (FLAT TYPE) (11 CORE)

207 1-468-737-21 POWER, SWITCHING212 1-500-497-11 FILTER, CLAMP (FERRITE CORE) (AUS)213 1-500-657-11 CORE, FERRITE301 1-500-497-11 FILTER, CLAMP (FERRITE CORE)

0303 1-777-071-53 CORD, POWER (SP, MY)

0303 1-829-627-11 CORD, POWER (E15)0303 1-827-295-22 CORD, POWER (AUS)0303 1-829-627-31 CORD, POWER (MX)

306 1-469-854-11 CORE, FERRITE (AUS)307 1-469-829-11 CORE, FERRITE (AUS)

308 1-500-657-11 CORE, FERRITE407 1-823-921-11 FMS-18 (6Pin)

0505 A-1067-676-A OPTICAL TRAVERSE UNIT (DBU-3)506 1-824-106-12 CABLE, FLEXIBLE FLAT (24 CORE)

0F1141 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)

0F1151 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)0F1161 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)0F1171 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)0F1181 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4.0AL/250V)0F1191 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4.0AL/250V)

M001 X-3952-411-1 MOTOR ASSY, LOADINGM501 1-787-099-21 FAN, DCS002 1-418-746-11 ENCODER, ROTARY

(CHUKING DETECT, TRAY OPEN/CLOSE DETECT)0T1100 1-443-270-11 POWER TRANSFORMER (E15, SP, MY, AUS)0T1100 1-443-790-11 POWER TRANSFORMER (MX)****************************************************************

ACCESORRIESE*************

0 1-569-007-11 ADAPTOR, CONVERSION 2P (E15)0 1-569-008-21 ADAPTOR, CONVERSION 2P (SP, MY)

VOLTAGE SELECTORVOL

The components identified by mark 0 or dottedline with mark 0 are critical for safety.Replace only with part number specified.

Ver. 1.1

2

HCD-ZX10D

REVISION HISTORY

Clicking the version allows you to jump to the revised page.Also, clicking the version at the upper right on the revised page allows you to jump to the next revisedpage.

Ver. Date Description of Revision

1.0 2004.07 New

1.1 2005.06 Addition of Mexican model

Rivision of mechanical parts and electrical parts