Upload
walter-ivan
View
264
Download
1
Embed Size (px)
Citation preview
8/9/2019 Manual de Cuchilla Clarkson
1/4
Clarkson KGA Heavy Duty Slurry Knife Gate Valve3 through 54
Tyco reserves the right to change product design and specifications CLKMC-0113-US-0112
without notice. Copyright 2001 by Tyco International Ltd.
Total Flow Control Solutions
Features
Meets a wide range of abrasion,
corrosion, temperature, and pressure
requirements.
May be used in wet or dry services
easily dealing with large, heavy
particles and tramp material.
Heavy-duty, field replaceable
elastomer sleeves.
No metal parts in contact with the
flowing slurry. Unobstructed flow eliminates
turbulence, minimizes pressure drop
across valve.
100% Isolation; bubble-tight shut-off
results in absolutely zero downstream
leakage.
Double-seated design provides
bi-directional flow and shut-off.
No seat cavity where solids can
collect and prevent full gate closure.
No gate or stem packing is required,
eliminating packing leakage and
maintenance.
Adaptable frame (yoke) design
featuring a top-removal stem nut.
General applications
Mining
Power
Pulp and paper
Alumina
Chemical
Cement
Technical data
Size range : 3 through 24
Operating pressure : 100 psi
Size range : 26 through 36
Operating pressure : 75 psi
Size range : 26 through 54
Operating pressure : 50 psi
Sleeve : Gum rubber standa
Temperatures : Standard sleeve
rated to 160F, up
400F with proper
elastomer selectio
Field-proven Clarkson KGA slurry knife gate valvesfeature heavy-duty, full port elastomer linings offeringthe ultimate in protection against heavy slurries.
8/9/2019 Manual de Cuchilla Clarkson
2/4
Clarkson KGA Heavy Duty Slurry Knife Gate Valve3 through 54
Tyco reserves the right to change product design and specifications CLKMC-0113
without notice. Copyright 2001 by Tyco International Ltd. 2
Features
How the KGA sleeves work: Matching sleeves are placed in the KGA valve housing to sealagainst the gate when the valve is closed and seal against each other when the valve isopen. As the gate moves from open to closed position, it separates the facing sleeves. Astiffener ring molded into the elastomer retains the roundness of the sleeves during openingand closing cycles. The unique KGA sleeve assembly provides positive sealing action whenthe valve gate is closed. When the gate is open, the sleeves provide an unobstructed portand protect metal parts from the flowing slurry.
Open position:
Gate positioned above seals
Metal parts not in contact with slurry
Unobstructed port area eliminatesturbulence, minimizes pressure dropacross valve
No seat cavity where solids can collectand prevent full gate closure
Closed position:
Gate travels completely through sleevesto provide blind flange shut off and expelsolids.
100% Isolation-bubble tight shut-offresults in absolutely zero downstreamleakage
Double-seated design providesbi-directional flow and shut-off
Standard configuration
Ductile iron valve housing (body)3 through 42Fabricated carbon steel housing (body)above 42
316 stainless steel gate rated for100 psi (3 through 12)75 psi (26 through 36)50 psi (42 through 54)
Mild steel body spacers and actuatorsupport frames
Flat-faced body flanges drilled andtapped (3 through 10) or slotted(12 through 54) to match ANSI B16.5Class 150 (3 through 24) or MSS SP44(26 through 54) companion flanges
High tear strength gum rubber sleeveswith stiffener rings
Gum rubber covered mild steel sleeveretainer flanges (10 through 54)
Optional
Various gate materials:
316L SS 317L SS317L MN Alloy 2017-4 PH HastelloyC-276Jessop 700 OthersFerralium 255
Sleeves (see below)
Stem covers
Splashguards
Actuators (see page 4)
Control accessories
Fabricated housing (body) of most anyweldable alloy in any standard size
Optional sleeve configurations and elastomers
Optional encapsulated
stiffener ring sleeve
Maintains round configuration of sleeve
Relieves stresses on seal
Used when stiffener ring contact with thegate is undesirable
Standard Sleeves -
external stiffener ring
Maintains round configuration of sleeve
Relieves stresses on seal
Scrapes scaling off gate when it cycles
Pipe Ring, 30 - 54 3 - 16 18 - 24J-Ring, 3 - 26
8/9/2019 Manual de Cuchilla Clarkson
3/4
8/9/2019 Manual de Cuchilla Clarkson
4/4
Clarkson KGA Heavy Duty Slurry Knife Gate Valve3 through 54
Tyco reserves the right to change product design and specifications CLKMC-0113
without notice. Copyright 2001 by Tyco International Ltd. 4
The data presented in this bulletin is for general information only. Manufacturer is not responsible for acceptability of these products in relation to system requirements. Patents and Patents
Pending in U.S. and foreign countries.All rights reserved.Printed in U.S.A.Tyco reserves the right to change product design and specifications without notice. Copyright 2001.
Valves & Controls
www.tycovalves.com
* Flange diameter: Designed to match ANSI B16.5/150 through 24, MSS-SP44 above 24
**Face-to-face: Add 1/4 to 1/2 for ease of installation
Dimensions and Weights
Centerline to top Handwheel
Valve MH MG AC HC MH MG Weight Weight Weight Weight
Size A* B** C D E F G H J K M M MH MG AC HC
3 7.50 6.88 8.88 18.93 21.38 21.38 24.56 2.41 2.81 15.81 12 12 50 127 85 504 9.00 6.88 11.00 22.00 23.33 23.94 27.63 3.33 3.88 16.88 12 12 64 141 130 70
6 11.00 7.00 13.00 28.00 31.82 30.18 34.00 5.38 5.81 17.88 16 12 98 175 180 98
8 13.50 7.25 15.25 32.90 14.89 35.00 38.31 6.88 7.75 19.00 20 12 135 212 210 135
10 16.00 8.88 16.56 38.75 42.63 40.50 44.25 9.06 9.81 23.40 20 24 198 275 310 175
12 19.00 10.13 21.00 47.45 45.50 53.13 10.75 11.50 25.50 24 427 669 360
14 21.00 10.13 22.75 53.31 53.43 57.80 12.50 13.25 26.38 24 448 720 414
16 23.50 11.00 24.25 57.20 60.19 64.06 14.00 14.75 27.62 24 573 1125 550
18 25.00 12.25 26.50 66.75 67.62 68.75 14.88 16.75 30.35 24 875 1330 950
20 27.50 14.13 28.38 71.94 73.50 74.44 16.56 18.50 31.29 24 1054 1680 1200
24 32.00 14.63 33.80 86.19 88.00 89.63 21.19 23.00 34.75 24 2200 1400
26 34.25 14.66 36.75 93.63 23.50 25.00 1700
30 38.75 15.57 41.50 106.19 26.75 29.00 2150
36 46.25 18.50 48.25 119.25 31.88 35.00 3500
42 53.00 21.03 56.50 145.68 38.25 41.00 5200
48 59.50 21.13 60.35 158.25 43.98
54 66.19 20.75 67.25 172.88 48.98
MH Manual
Handwheel
BG Manual
Bevel Gear
AC Air Cylinder HC Hydraulic Cylinder EM
Electro-mechanical
Hydra-Helper
Actuation
Note: Not all actuators shown are available on all valve sizes
H. Port diameterJ. Inlet diameterC B
A
E G
MM
K
F
MH MG AC HC
D