Manual Asco Monitoring

8/10/2019 Manual Asco Monitoring

1/18


2/18

The Power to Know

Yourneed to know whatshappening with your facil-itys on-site power and

distribution system. Thatincludes automatic transferswitches, generator paral-leling control switchgear,gensets, circuit breakers,paralleling bus, protectiverelays and other gear.

Its not only to know, butto understand. To act. Tosolve issues when seconds

count.

Your need to know aboutequipment condition,operation and status ismore critical than ever.Essentially, to make surethat all equipment and

Its all about the need to know...

components are healthyand playing nice. Thatsespecially important as

system complexity andsophistication increase.

Knowing can help ensurepower reliability for criti-cal operations, and thuscontinuity of those opera-

tions. To make sure whenquestions are asked, youhave answers.

Now theres a way to getexactly the amount ofcommunication, monitor-ing and control capabilitiesyou want for your utilitysource and on-site powersystem.

2


3/18

FULFILL YOUR NEED

Drill down for a closer look - Each transfer switch,generator, breaker and any other power equip-ment has its own dedicated screens.

Its the new ASCO Power-QuestPower Monitoringand Control family.

The PowerQuest family isthe most comprehensivecommunication, monitor-ing and control solutionever offered by EmersonNetwork Power.It empowers you. It fulllsyour need to test, man-age loads, optimize thebus bar, remotely monitorand otherwise be aware ofthe status of your facility'sutility source and on-sitepower. You have both thePower to Know and thePower to Do.

Whether you requirestandard monitoring andcontrol, or a comprehen-sive Critical Power Manage-ment System, PowerQuestcan satisfy your needs.

Hardware. Software. Instal-lation and testing. Service.

And upgrades and technol-ogy refreshes. A truly com-plete solution for all yourcommunication, monitor-ing and control needs.

This brochure can helpyou determineeasilythe type of PowerQuestsystem you need for yourASCO power switching andcontrols, and third-partyequipment.

ASCO PowerQuestPower Monitoring and Control Systems

PowerQuest provides monitoring, alarming and control of Critical Power ManagementSystems, which comprise transfer switches, paralleling control switchgear, gensets, circuitbreakers, distribution and other gear. It also integrates with building management systems.

Critical Power Management System (CPMS)

StaticTransferSwitches

TransferSwitches

Paralleling ControlSwitchgear

Generators

CPMSDisplay

Terminal

Remote

DisplayTerminal

Building

ManagementSystem (BMS)

BE EMPOWERED

PowerQuest can enable you to: Monitor and control power transfer switches, paralleling control switch-

gear, gensets, breakers, bus bars and other equipment Monitor normal and emergency voltages and frequency and their settings Know transfer switch position and source availability Transfer and re-transfer loads for system testing View and adjust transfer switch time-delay settings Know each transfer switchs rating and identification Receive automatic alerts on system operation via e-mail, pager, or selected

system alarms View current, power and power factor View transfer switch event log and know the transfer switch test schedule

Internet


4/18

Monitoring and Control Continuum

A Critical Power Manage-

ment System providingsystem-wide monitoring,alarming and control oftransfer switches, paral-leling control switchgear,gensets and distribution,both on and off site; alsointegrates PLCs, buildingmanagement systems andon-site, simulator training.Power quality and a rangeof other information isprovided.

A specify-your-ownCritical Power Manage-ment System (CPMS) thatincludes gensets, circuitbreakers, and reports onenergy, trending, powerdemand, bypass status,diagnostics, alarming, andcomponent-level monitor-ing and control.

Basic monitoring, remotealarming and control, or, ifyou simply want to knowtransfer switch status orperform monthly transfertesting

You Need... Your Application Is... Desired Capabilities

Local or remote, oor-levelmonitoring and control, oras part of a larger, facility-wide monitoring andcontrol system

Local, oor-level, orfacility-level monitoringand control; 5700 systemscan be congured in threecapability levels: Essential (single building) Professional (multiplebuildings, single campus)

Enterprise (multiplecampuses)

Local oor-level monitoring

and control, and remotesystem-wide monitoringand control seamlesslyintegrated with buildingmanagement systems;communication paths canbe Ethernet, Web-basedPCs and monitors; simula-tor training that mimics thelive system allows conduct-ing what if scenarios,without risking systemoperation.

Residential, lightcommercial and retailestablishments

Commercial, retail,telecom, agriculture,municipal, such as wastewater treatment, light in-dustrial plants, educationalcampuses and healthcarefacilities requiring dis-tributed power and loadmanagement

Regional and global

networks of data centers,nancial institutions, Webhosting companies andhealthcare campuses thatoperate expansive and so-phisticated on-site powersystems that are essentialfor providing 24/7 powerreliability

Selecting the system that provides your level of need-to-know information and control...

PowerQuestStandard Capabilities

PowerQuestCongurable Flexibility

PowerQuestUltimate Customization

4

Essential

Professional

Enterprise


5/18

Required Components FunctionalityProducts

ASCO Series 185 and Series300 Automatic TransferSwitches

ASCO 4000 Series and7000 Series AutomaticTransfer Switches,including 7000 SeriesBypass-Isolation.

ASCO 7000 Series Auto-

matic Transfer Switches,including Bypass-Isolationand 7000 Series GeneratorParalleling ControlSwitchgear.

Connectivity Modules and Annunciators

Standard components, plus Power Control SystemManagement and Operator Interface Terminals

Standard and Congurable components, plus higher per-

formance Power Control System and Data ManagementScreens, and an on-site Simulator Training System

Locally monitor switchposition, source availabilityand the status of on-site powersystem devices via customizedWeb page. Initiate tests andpush-button remote transfer.Aural, visual alarms.

Monitor voltage and phasecurrents. Capture/store moredata points. Display data on 19screen. Interface with powercontrol system, BMS. Integratewith Group 5 Controller. Getemail alerts. For single build-ings, single campuses andglobal facilities.

Interact fully with incoming

utility service boards, mis-sion critical paralleling gear,transfer switches, UPSs, STSsand PDUs...and interface withBuilding Management Systems.Capture, store and analyzequantities of data to optimizeon-site power operation. Useyour display devices and/orASCO 42 LCD screen. Highlycustomize your GUI with sophisticated HMI/SCADA software.

Identies the ASCO products and components required to provide the functionality you need.


6/18

Power Monitoring and Control Compatibility Matrix

6

Power Quest

PowerQuest Specifed Components

ASCO TransferSwitches

ASCO PowerControl Systems

Other Power Equipment

ProductNumber 300 4000 7000 300 4000 7000

Generators, Breakers, UninterruptedPower Supplies, Load Banks and more

PowerQuest Specifed Packaged Approach

5150

5160

5210

5220

5221

5310

5350

5710

5750

5790

5900

5221 PMU Required

5221 PMU Required

5221 PMU Required

Sta

ndardCapabilities

ConfgurableFlexibility

UltimateCustomization

5400


7/18

PowerQuest5300 Standard CapabilitiesPowerQuest5300 moni-tors and controls ASCOPower Transfer Switches in

all amperages and thesecongurations: Manual or Automatic Closed Transition Open Transition Delayed Transition Bypass-Isolation Indoor or Outdoor Service Entrance Rated

PowerQuest5300 providesstandard monitoring andcontrol capabilitiesstatus,

auditory and visual alarm-ing, and local and remotecontrol.

One connectivity moduleis required to connect eachtransfer switch to monitor-

ing servers.

Annunciators monitorone, or up to eight transferswitches. Multiple annun-

ciators can accommodatelarger numbers of transferswitches.

And TheseMonitoring Servers.

And You Want ThesePower to KnowCapabilities...

If You Want toMonitor and ControlASCO Power TransferSwitches

Specify ThisConnectivityComponent...

ASCO 5150ConnectivityModule

Series 185

Series300

4000

Series

ASCO 5310Annunciator

ASCO 5350ATS Annunciator

7

The Power Monitoringand Control Compat-ibility Matrix (left) showscomponents that can becongured for a range ofASCO Automatic TransferSwitches and GeneratorParalleling Control Switch-gear. Some componentsalso can monitor third-par-

ty devices, such as gensets,paralleling bus, circuitbreakers and other gear.

Consider including remotemonitoring capability.Remote capabilities canminimize the need forpersonnel to be nearequipment and perhapsavoid suiting up in arc ash

protective gear.The following pagesillustrate the componentsand monitoring servers forPowerQuest5300, 5700or 5900 systems, basedon the equipment at yourfacility and the monitoringand control capabilities youwant.

For example, if you wantbrowser independence (IE,Safari, Firefox, Chrome,Opera), multilingual sup-port, Modbus and BacNetBMS support, NTP devicetime synchronization andtest reports for complyingwith JCAHO requirements,consider PowerQuest 5700or 5900 systems.

Power Monitoring Made Easy


8/18

PowerQuest5700 is afeature-rich system.

It offers unsurpassed

flexibilityfor conguringa range of functionalitiestailored specically to your

Features

5710Essential

CPMS

5750Professional

CPMS

5790Enterprise

CPMS

Display 15" 19" 42"HD

Performance

Database StorageNone

Number of Devices 32 64 128

Number of Clients 3 10 100

Real time Monitoringand Control

Historical Events

Historical Trending

PowerQuestReports

BMS Modbus Server

Facility Messaging

Redundant Power Supply

Hot Swappable Hard Drives

PowerQuest 5700 CPMS: Congurable Flexibility

Once congured, it is ex-ceptionally easy to set upand operateday to day.

Functionalities include: Alarms/Events Notication

Statistics Settings/Set Points Test Scheduling Diagnostics

Time Synchronization Reporting Trending

ResolutionIndependence(800 x 600 to 1920 x 108

Windows

Support AppleMac OS

Support

Superior performanceisa hallmark of PowerQuest5700, as it is with the 530and 5900 families of powemonitoring and controlsystems.

System performance char

acteristics encompass: Distributed Processing Dynamic Data Update 1000 Mbps Ethernet Prioritized Data Update Dynamic Throttling Diagnostic Logging

Ease of accessand strongdata securityoften canseem a contradiction

in terms, but the 5700enhances access, whilemaintaining data security

Login and data securityfeatures include: Login Security 3-Level Security Acces AES 128-bit Encryption Firewall Network

Security Auto Log Out

3 Critical Power Management Systems (CPMS) Optimize Flexibility,Set Up/Operation, Performance, Access and Data Security


9/18

PowerQuest5710 CPMS Essential

AValue of Standard Features


And You Want These'Power to Know'Capabilities...

Engine-Generators

If You Want toMonitor and ControlUp to 32of TheseTypes of On-SitePower Equipment...

Specify TheseConnectivity andPower MonitoringComponents...

ASCO 5350

ATS AnnunciatorASCO 5150ConnectivityModule

ASCO 5210Power Meter

7000Series

Series300

4000Series

ASCO 5221 Power

Manager Unit

ASCO 5710CPMS Server

8

Which 5700 package is right for you?

The 5700 line offers versa-tile options with a range ofcapabilities starting withthe Essentialpackage andbuilding up through theProfessionaland Enterprisepackages.

TheEssentialpackageoffers a value solutionfor your monitoring needs.Control up to 32 devices,with basic Power to Know

capabilities such as energysummary, notication andsite statistic, along withstandard power moni-toring devices, remoteannunciators and 15 inchmonitoring servers.

The5700Professionalpackage offers richerfeatures to your monitor-ing needs. Control up to 64devices, with even morePower to Know capa-bilities such as reports,trending and diagnos-

tics, along with standardpower monitoring devices,remote annunciators andadditional 19 inch monitor-ing servers.

The Enterprisepackageoffers full redundancyfeatures with control of upto 128 devices, all Powerto Know capabilities,standard power monitor-ing devices, remote an-nunciators and additional42 inch monitoring servers.


10/18

PowerQuest5750 CPMS ProfessionalFeature Rich with Comprehensive and Diagnostic Reporting





If You Want toMonitor and ControlUp to 64of TheseTypes of On-SitePower Equipment...






CircuitBreakers

Bus Bar

Engine-Generators

7000

Series

4000Series

ASCO 5221 Power

Manager Unit


11/18

PowerQuest5790 CPMS EnterpriseFull Redundancy and Scalability

If You Want toMonitor and Control

Up to128of TheseTypes of On-SiteP E i t

Specify These

Connectivity andPower MonitoringComponents

And You Want These

Power to KnowCapabilities...

And These

Monitoring Servers.





CircuitBreakers

Bus Bar

Engine-Generators

7000Series

4000Series

ASCO 5221 PowerManager Unit




PanelBoard


12/18

PowerQuest5900CPMS OffersUnlimited Customization

Unlimited Number of On-Site Power Devices

UPS

CircuitBreakers

Engine-Generators

Low Voltage ParallelingControl Switchgear

Medium Voltage

Paralleling Control Switchgear

Static TransferSwitch

PowerDistribution Unit

PowerTransferSwitch

Mission-critical data centers rely on comprehensive powermonitoring and control of on-site power systems to helpoperate, test and diagnose equipment, thus helping ensurelong-term power reliability.

If you want the ultimatein monitoring and controlcustomization, redundancyand scalability, consider

the ASCO PowerQuest5900 Critical Power Man-agement System.

Its ideal for complexon-site power systemsthat support ultra-criticalapplications such as datacenters, large hospitals,nancial centers andother operations where thestakes are high.Where 24/7 power reliabil-

ity is absolutely essential.When you must knowwhats happening all thetime, especially when sys-tem operation is outside ofestablished parameters.The PowerQuest5900 canbe tailor made to youron-site power system. Itincludes an on-site simula-tor that allows convenient

staff training and re-train-ing, and the ability to testwhat if scenarios that canprepare staff for practicallyany eventuality.

The schematic on the rightillustrates the PowerQuest5900, including 5990 Simulator

5950 Power ControlSystem Management 5910 Operator Interface

Terminal 5220 Power Managers 5310 and 5350

Annunciators, and 5110 and 5150

Connectivity Modules.

The PowerQuest5900 canprovide all the Power toKnow and Power to Do

needed for even the mostcomplex on-site powersystems with multiple, par-alleled gensets, ATSs and arange of power distributionequipment.

If You Want toMonitor and Control an Unlimited Numberof These Types of On-Site Power Devices...

ProtectiveRelay

Power QualityMeter

Load Bank

PanelBoard

12


13/18

ASCO 5150Connectivity Module

ASCO 5900SCADA


ASCO 5150

Connectivity Module










ControlsSimulator


14/18

A typical PowerQuestmonitoring overview screen

Designing a communica-tions pathway between aPowerQuestsystem andon-site power equipment isstraightforward.

ASCO 5150 and 5160 con-nectivity devices andASCO 5210 and 5220Power Managers connectdirectly to equipment viaModbus, Ethernet or beroptic cable.

Modules and power man-

agers typically are installedon or near the equipmentto which they are con-nected.

The modules and powermanagers connect toASCO Monitoring Serversand building managementsystems via Ethernet orber optic cable.

Monitoring servers can beinstalled near the equip-

ment or remotely. Remotelocations range fromnearby engineering ofcesto sites around a singlecampus, multiple campus-

es in a region, or buildings

spread nationally, or evenglobally.

The distances betweenmodules and power man-agers and the monitoringservers they connect to areimportant considerationsin designing a power com-munication, monitoringand control system.

For example, to maintaingood communication, the

distance for an ethernetover category 6 cableconnection should be nolonger than 300 ft. For beroptic cable, it's 6,500 ft.

When distances for those

ASCO 5160 RCUs (RemoteConnecitvity Units) exceedtheir respective limits,ASCO Remote ConnectivityUnits effectively extend thedistance.

An example: A facilitymanager wants to connectPowerQuestto on-site pow-er equipment using thefacility's legacy Ethernetcommunications network.But, the distances be-tween modules and powermanagers and monitoringservers is 900 ft. Remoteconnectivity units daisy-chained at the 300 ft. and600 ft. marks will permitthe use of the legacy Ether-net network.

Remote connectivity unitseffectively extend the dis-tances for ber optic cablenetworks as well.

Web-based communica-tion satises connectivityrequirements regionally,nationally and globally.

Sample schematics showtypical connectivity con-gurations.

PowerQuestFacilitates Effective ConnectivityWith Multiple Communications Modalities

SELECT ETHERNET,

MODBUS OR FIBER OPTICCABLE. ASCO SUGGESTSETHERNET FOR NEWCONSTRUCTION.

Only PowerQuest Employs AES 128-bitEncryption to Protect On-site Power SystemsAgainst Unauthorized Data Access and Control

Securing and protecting your on-sitepower system from unauthorized moni-toring and control is paramount.

PowerQuest Power Monitoring andControl systems employ Advanced En-cryption Standard (AES 128-bit Encryp-tion) It's the same advanced encryptionstandard used by the National SecurityAgency to protect top secret informa-tion. In fact, AES 128-bit Encryption isthe encryption standard adopted by theentire Federal government.

PowerQuest is the only on-site powermonitoring and control system outfit-ted with AES 128-bit Encryption. Thestandard is based on a cryptographicalgorithm that securely protects elec-tronic data. It's encryption and decryp-tion process is fast in both hardwareand software.

Trust PowerQuest to secure and protectyour on-site power equipment fromunauthorized access.

14


15/18

MonitoringServer

300 ft.300 ft.

Typical Ethernet Cat 6 Connection

6,500 ft.

MonitoringServer

Typical Ethernet Fiber Connection

Type Medium Performance Distance

EthernetEthernet

Cat 6Fiber

300 Feet6,500 Feet

lll

lllll

5160 RCU

300 ft.

This conguration Ethernet overFiber Optic Cable:

-Equipment within 300 Feet of a central locationcan be connected to an ASCO 5160 usingEthernet over Category 6 cable.

-ASCO 5160 Remote Connectivity units can allbe connected together using Ethernet overCategory 6 cable (300 Feet Max) or Ethernetover Fiber Optic cable (6500 Feet Max).

This conguration Ethernet overCategory 6 Cable:

-Equipment within 300 Feet of acentral location can be connectedtogether via an ASCO 5160 RemotConnectivity Unit (RCU) usingEthernet over Category 6 cable.

5160RCU

CircuitBreakers

Engine-Generators

300 ft.To AdditionalEquipment

300 ft.

300 ft.300 ft.

5160RCU

CircuitBreakers

Engine-Generators

300 ft.

BuildingManagement

System

To Additional

Equipment

To Additional

Equipment6,500 ft.

Power TransferSwitch


6,500 ft.

RemoteAnnunciator

Typical Remote Annunciator Conguration

300 ft.

300 ft.300 ft.

5160RCU

RemoteAnnunciator





300 ft.300 ft.

RemoteAnnunciator

ConnectionTypes

RemoteAnnunciator

Internet


16/18

The Component Approach : Built on Proven Technology

Building-block components can be conguredeasily to provide exactly the degree of monitor-ing, control and communication you want foryour on-site power system.

5310, 5350Annunciators

16

5210, 5220PowerManager

5990 TrainingSimulator

5900CustomTerminals

5710,

5750, 5790DisplayTerminals

ASCO 5210 (left) and 5220 (right) Power Metersmeasure, displays and provides single- or 3-phase Energy and Power informationwith Ethernet via the ASCO 5150 Communication Module.

An ASCO 5990 Simulator allows convenient, on-site staff training and testingof what if scenarios. It is not connected to live power monitoring and controldevices.

The ASCO 5900 Series provides a Customized Critical Power ManagementSystem with support of just paralleling switchgear to the most advanced criticalpower system with a wide-array of critical power components, such as, UPSs,STSs, Load Banks, Panel Boards, etc.

ASCO 5710(center), 5750(left) and 5790(right)

Critical Power Management System provides various levels of monitoring,control and management capability of power equipment. It seamlessly monitorsASCO transfer switches as well as generators, breakers, paralleling buss, panelboards and other power equipment via a 5221 PMU. It consists of servers andtouch screen interfaces.

ASCO 5310(left) and 5350(right) ATS Remote Annunciatorsprovide distributed monitoring of transfer switch position and sourceavailability as well as transfer test and re-transfer control.

ASCO 5221Power ManagerUnit

ASCO 5221 Power Manager Unit (PMU)is used to enable power measure-ment, discrete inputs for status and output relays for control of generators,breakers and other power equipment via 5700 Series CPMS solutions.

ASCO 5400 Power Quality MetersThe ASCO Power Quality Meters provides intelligent power analysis, energymeasurement and event recording for critical and sensitive loads. Its uniquecontinuous waveform and harmonic recording capabilities ensure all events arecaptured, improves response time, and helps identify corrective action to powerquality related issues.

5150, 5160Connectivity

Modules

An ASCO 5150 Connectivity Module (left) provides 100 Mbps EthernetConnectivity for ASCO Transfer Switches and Power Meters and includes AES128-bit Encryption, as per NIST, for enhanced security.

The ASCO 5160 Remote Connectivity Unit (RCU) (right) provides 10 Ethernetand Dual-Fiber Optic connections in a NEMA 3R enclosure.

5400Power QualityMeter


17/18

ASCO Test Reports isavailable with PowerQuest

Power Monitoring and Con-trol Systems.

Test Reports create ac-curate, precise reportsformatted according toNFPA monthly exercis-ing logs, which facilitatescompliance with NFPA 99and 110.It can trigger event log-ging, respond to spontane-

ous events and producea complete report. It alsoinitiates tests through au-tomatic transfer switchesand gets data directly fromgenerators and transferswitches.

Congure ASCO Test ReportsTo Your On-Site Power System

Your need to know criticalinformation about yourfacilitys on-site powersystem can mean the dif-ference between ensuringpower reliabilityand not.

Nows the TimeTo Know

With the stakes so high, besure you have the com-munication, monitoringand control capabilities youneed to optimize powerreliability for your facilityscritical operations.

Have the peace of mindknowing the informationyou want will be therewhen you need it.

Call 1-800-800-ASCO(2726) or email ASCO [email protected].

For more information aboutASCO PowerQuest Power Monitoing and Control capabilities,visit EmersonNetworkPower.comASCO,or ascoapu.com.

Healthcare facilities can moreeasily comply with JCAHO* andNFPA** reporting requirementswith a PowerQuest powermonitoring and control systemand ASCO Test Reports.

* Joint Commission on the Accreditation oHealthcare Organizations

** National Fire Protection Association

Energy Reports providesNormal, Emergency andTotal Energy consumption

Alarms Reports graph alarmstatistics for all configuredtransfer switches and otherequipment via Power Man-ager Units.

Setting Reports provides allcommunications settings,equipment setpoints andstatistics.

JCAHO/Outage Reports sum-marize generator loadingand electrical parametersduring tests.

Historical Log Reportsprovide time-stamped eventlogs for a variety of eventsby devices and severity level.

ASCO Services technicianscan produce diagnostic re-ports on equipment duringservice calls.


18/18

Documents

Manual Asco Monitoring