Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
Printed on 13 February, 2012
Manual # 99905387
9/65 Technical Specifications Revision Date 20120130
IOWA MOLD TOOLING CO., INC.
PO Box 189 Garner, IA 50438
Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com
Copyright © 2012 Iowa Mold Tooling Co., Inc. All rights reserved
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of Iowa Mold Tooling Co., Inc.
Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation company.
i
Contents
Technical Data and Charts 3
9/65 Specifications........................................................................................................................................4 9/65 Series Single Link Capacity Charts ......................................................................................................6 9/65 Series Double Link Capacity Charts...................................................................................................11 Dimensions .................................................................................................................................................16 Mounting Dimensions.................................................................................................................................17 Dimensions, Fixed Stabilizer Legs .............................................................................................................18 Dimensions, Manual Swing-Up Stabilizer Legs.........................................................................................19 Swing Clearance Drawings.........................................................................................................................22
Single Link Swing Clearance ..........................................................................................................22 Double Link Swing Clearance.........................................................................................................23
Pressure Settings & Hydraulic Schematics 25
9/65 Pressure Settings.................................................................................................................................25 9/65 Hydraulic Schematic...........................................................................................................................27
3
In This Chapter
9/65 Specifications .....................................................................4 9/65 Series Single Link Capacity Charts ....................................6 9/65 Series Double Link Capacity Charts...................................11 Dimensions.................................................................................16 Mounting Dimensions.................................................................17 Dimensions, Fixed Stabilizer Legs .............................................18 Dimensions, Manual Swing-Up Stabilizer Legs..........................19 Swing Clearance Drawings ........................................................22
C H A P T E R 1
Technical Data and Charts
4 9/65 Technical Specifications Manual # 99905387
9/65 Specifications
9/65 1-HYDRAULIC 2-HYDRAULIC 3-HYDRAULIC 4-HYDRAULIC 5-HYDRAULIC Crane Rating (Single Link) 65,100 ft-lb
(9.0 tm) 62,925 ft-lb (8.7 tm)
61,480 ft-lb (8.5 tm)
59,310 ft-lb (8.2 tm)
57,865 ft-lb (8.0 tm)
Crane Rating (Double Link) 63,650 ft-lb (8.8 tm)
61,480 ft-lb (8.5 tm)
59,310 ft-lb (8.2 tm)
57,865 ft-lb (8.0 tm)
55,695 ft-lb (7.7 tm)
Maximum Horizontal Reach
18'-0" (5.5 m)
24'-7" (7.5 m)
31'-10" (9.7 m)
38'-9" (11.8 m)
45'-11" (14.0 m)
Maximum Vertical Reach 25'-7" (7.8 m)
32'-3" (9.8 m)
39'-4" (12.0 m)
46'-5" (14.1 m)
53'-4" (16.3 m)
Capacity - Single Link Cranes
Maximum Capacity 8380 lb (3800 kg)
7850 lb (3560 kg)
7630 lb (3460 kg)
7165 lb (3250 kg)
6745 lb (3060 kg)
Max Capacity @ Max Reach
3660 lb (1660 kg)
2515 lb (1140 kg)
1785 lb (810 kg)
1280 lb (580 kg)
950 lb (430 kg)
Capacity - Double Link Cranes Maximum Capacity 9040 lb
(4100 kg) 8555 lb (3880 kg)
8115 lb (3680 kg)
7715 lb (3500 kg)
7340 lb (3330 kg)
Max Capacity @ Max Reach
3550 lb (1610 kg)
2425 lb (1100 kg)
1720 lb (780 kg)
1235 lb (560 kg)
950 lb (410 kg)
Crane Weight** 2360 lb (1070 kg)
2590 lb (1175 kg)
2810 lb (1275 kg)
3010 lb (1365 kg)
3185 lb (1445 kg)
Hook Approach
Vertical 9'-8" (2.94 m)
9'-4" (2.84 m)
9'-0" (2.74 m)
8'-8" (2.64 m)
8'-4" (2.54 m)
Horizontal 2'-7" (0.79 m)
2'-9" (0.84 m)
2'-11" (0.89 m)
3'-1" (0.94 m)
3'-3" (1.0 m)
Center of Gravity-Stored (Single Link) Vertical 24"
(604 mm) 25" (633 mm)
26" (662 mm)
27" (688 mm)
27.7" (704 mm)
Horizontal (C/L Rotation to Bridge)
10.6" (270 mm)
10.5" (265 mm)
10" (255 mm)
9.3" (236 mm)
9" (228 mm)
Center of Gravity-Stored (Double Link) Vertical 25"
(637 mm) 26" (665 mm)
27.4" (695 mm)
28" (714 mm)
28.7" (729 mm)
Horizontal (C/L Rotation to Bridge)
10" (256 mm)
10" (255 mm)
9.8" (250 mm)
9" (229 mm)
8.7" (221 mm)
* Crane rating (ft-lb) is the rated load (lb) multiplied by the respective distance (ft) from the centerline of rotation with all extensions retracted, and the inner and outer booms in a horizontal position, per ANSI B30.22. ** Crane weight is for standard single-link crane with tank & mounting kit. Does not include stabilizers, oil. Add 55 lb (25 kg) for double link.
Chapter 1 Technical Data and Charts 5
9/65 DIMENSIONS & PERFORMANCE Crane Storage Height 7'-0" (2135 mm) Width 7'-9" (2350 mm) Mounting Space 2'-5" (747 mm) Maximum Swing Clearance (from top of chassis frame)
21.5" (545 mm) at 7'-5" (2251 mm) (Single) or 7'-6" (2276 mm) (Double)
Rotational Torque 9665 ft-lb (1.3 tm) Rotation 420 degrees Optimum Pump Performance 10.5 GPM (40 L/min) System Pressure 4350 psi (300 bar) Oil Reservoir Capacity 14.5 gal (55 L)
9/65 STABILIZERS Stabilizer Pad Diameter 6" (158 mm) Stabilizer Weights Standard Man Out/Hyd Down, Fixed
355 lb (160 kg)
Standard Man Out/Hyd Down, Swing-Up
365 lb (165 kg)
Extended Reach Hyd Out/Down, Fixed
410 lb (185 kg)
Extended Reach Hyd Out/Down, Swing Up
420 lb (190 kg)
Stabilizer Spread, Standard 13'-8" (4165 mm) Stabilizer Spread, Extended Reach 16'-10" (5140 mm)
9/65 CHASSIS SPECIFICATIONS Front Axle Rating (GAWR) 8000 lb (3630 kg) Rear Axle Rating (GAWR) 16,000 lb (7260 kg) Resistance to Bending Moment 976,500 in-lb (112,505 kg-m)
6 9/65 Technical Specifications Manual # 99905387
9/65 Series Single Link Capacity Charts
70399295
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 SL K1
0CENTERLINE
3' 6' 9' 12' 15' 18' 21'(0.91m) (1.83m) (2.74m) (3.66m) (4.57m) (5.49m) (6.40m)
MOUNTINGSURFACE
3'
0
(0.91m)
6'(1.83m)
9'(2.74m)
12'(3.66m)
15'(4.57m)
18'(5.49m)
21'(6.40m)
24'(7.32m)
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
52702390
36601660
83803800
KGLB
Chapter 1 Technical Data and Charts 7
70399296
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 SL K2
0MOUNTINGSURFACE
(0.91m)
6'(1.83m)
9'(2.74m)
12'(3.66m)
15'(4.57m)
18'(5.49m)
21'(6.40m)
24'(7.32m)
27'(8.23m)
30'(9.14m)
3'
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
0 6' 12' 18' 24'CENTERLINE (1.83m) (3.66m) (5.49m) (7.32m)
3' 9' 15' 21'(0.91m) (2.74m) (4.57m) (6.40m)
KGLB
78503560
50052270
34401560
25151140
8 9/65 Technical Specifications Manual # 99905387
70399297
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 SL K3
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulaci ón de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
0CENTERLINE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
3'(0.91m)
9'(2.74m)
15'(4.57m)
21'(6.40m)
27'(8.23m)
MOUNTINGSURFACE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
36'(10.97m)
42'(12.80m)
0
KGLB
47402150
32201460
76303460
22951040
1785 810
Chapter 1 Technical Data and Charts 9
70399298
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 SL K4
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulaci ón de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
6'
9'3'
12'
15'
18'
21'
24'
27'
30'
33'
36'0CENTERLINE
(0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m)
(1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m)
0MOUNTINGSURFACE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
36'(10.97m)
42'(12.80m)
48'(14.63m)
KGLB
45202050
30001360
71653250
2115960
1590 720
1280580
10 9/65 Technical Specifications Manual # 99905387
70399299
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 SL K5
KGLB
0MOUNTINGSURFACE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
36'(10.97m)
42'(12.80m)
48'(14.63m)
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulaci ón de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
6'
9'3'
12'
15'
18'
21'
24'
27'
30'
33'
36'
39'
0CENTERLINE
(0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m)
(1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m)
(11.89m)
42'
45'
(12.80m)
43001950
28201280
67453060
1940880
1455660
1125510
950430
(13.72m)
Chapter 1 Technical Data and Charts 11
9/65 Series Double Link Capacity Charts
70399290
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 DL K1
0CENTERLINE
3' 6' 9' 12' 15' 18' 21'(0.91m) (1.83m) (2.74m) (3.66m) (4.57m) (5.49m) (6.40m)
MOUNTINGSURFACE
3'
0
(0.91m)
6'(1.83m)
9'(2.74m)
12'(3.66m)
15'(4.57m)
18'(5.49m)
21'(6.40m)
24'(7.32m)
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulaci ón de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
KGLB
12 9/65 Technical Specifications Manual # 99905387
70399291
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 DL K2
0MOUNTINGSURFACE
(0.91m)
6'(1.83m)
9'(2.74m)
12'(3.66m)
15'(4.57m)
18'(5.49m)
21'(6.40m)
24'(7.32m)
27'(8.23m)
30'(9.14m)
3'
KGLB
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulaci ón de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
85553880
48302190
33051500
24251100
0 6' 12' 18' 24'CENTERLINE (1.83m) (3.66m) (5.49m) (7.32m)
3' 9' 15' 21'(0.91m) (2.74m) (4.57m) (6.40m)
Chapter 1 Technical Data and Charts 13
70399292
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 DL K3
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
0CENTERLINE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
3'(0.91m)
9'(2.74m)
15'(4.57m)
21'(6.40m)
27'(8.23m)
MOUNTINGSURFACE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
36'(10.97m)
42'(12.80m)
0
KGLB
45852080
30851400
81153680
22251010
1720 780
14 9/65 Technical Specifications Manual # 99905387
70399293
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 DL K4
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulaci ón de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
KGLB
6'
9'3'
12'
15'
18'
21'
24'
27'
30'
33'
36'0CENTERLINE
(0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m)
(1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m)
0MOUNTINGSURFACE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
36'(10.97m)
42'(12.80m)
48'(14.63m)
43451970
28901310
77153500
2030920
1520 690
1235560
Chapter 1 Technical Data and Charts 15
70399294
IOWA MOLD TOOLING CO., INC.BOX 189 • GARNER • IA • 50438 • 641-923-3711
Model9/65 DL K5
KGLB
0MOUNTINGSURFACE
6'(1.83m)
12'(3.66m)
18'(5.49m)
24'(7.32m)
30'(9.14m)
36'(10.97m)
42'(12.80m)
48'(14.63m)
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
6'
9'3'
12'
15'
18'
21'
24'
27'
30'
33'
36'
39'
0CENTERLINE
(0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m)
(1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m)
(11.89m)
42'
45'
(12.80m)
(13.72m)
41451880
27101230
73403330
1850840
1390630
1080490
905410
16 9/65 Technical Specifications Manual # 99905387
Dimensions
13'-8" (4160)
(238)
A
A
A-A
TOP CHASSIS
TOP
CL CHASSIS
A A
3.14" (80)(TYP)
2.9"(74)
ø1.1"(28.5)
13'-8" (4170) (standard)16'-10" (5140) (extended reach)
(989) (std) 7'-8"(2350)
3'-10"(1175)
20.5"(520)
9.4"
20.5"(520)
(2135)7'-0"
2'-10"(868)
2'-5"(747)
13.4"(341)
CHASSISTOPCHASSIS
4'-10"
3'-3"
(1474) (ext)
(989) (std)4'-10"
3'-3"
(1474) (ext)
Double link crane shown. Single link dimensions are the same. Dimensions shown in ft-in (mm).
Chapter 1 Technical Data and Charts 17
Mounting Dimensions
CHASSISCL
8 mounting holes - M24 x 2 bolt
4 mounting holes - M30 x 2 bolt
3.35"(85 mm)
25"(633 mm)
Min 22.8 " (580 mm)
Max 41.7 " (1060 mm)
Max 1.4" (35 mm)Max 1.4" (35 mm)
1
2
1
ø1" (26 mm )7.3" (185 mm)
Max 6.3" (160 mm)
3.1"(80 mm)
1.6"(40 mm)
25"(633 mm)
Min 32.3 " (820 mm) /Max 41.0 " (1040 mm)
1
12.5"(318 mm)
1.5" (38 mm) typ1.5" (38 mm) typ
NOTES (SEE REFERENCE NUMBER IN BOX):
1 Value dictated by strength concerns.
2 Mounting hole diameter.
18 9/65 Technical Specifications Manual # 99905387
Dimensions, Fixed Stabilizer Legs
A (777) (877) (977)
CHASSISCL
TOP CHASSIS
TOP CHASSIS
CL CHASSIS
20.5"(520 mm)
20.5"(520 mm)
(238 mm)9.4"
58" (1474 mm) 58" (1474 mm)86" (2192 mm)
202" (5140 mm)
20.5"(520)
20.5"(520)
(238 mm)9.4"
39" (989 mm) 39" (989 mm)86" (2192 mm)
164" (4170 mm)
38.5"34.5"30.6"
Chapter 1 Technical Data and Charts 19
Dimensions, Manual Swing-Up Stabilizer Legs
975875775
CHASSISCL
A
TOP CHASSIS
chassisCL TOP CHASSIS
Type SR 30°/60°
38.5"34.5"30.6"
20.5"(520 mm)
20.5"(520 mm)
(238 mm)9.4"
39" (988 mm) 39" (988 mm)85.6" (2173 mm)
163" (4150 mm)
58" (1474 mm) 58" (1474 mm)85.6" (2173 mm)
201.6" (5121 mm)
20.5"(520 mm)
20.5"(520 mm)
(238 mm)9.4"
20 9/65 Technical Specifications Manual # 99905387
B
C
30°60°B
C
Type R-60°
(465)
(745)
(515)
(831)
(565)
(918)
B
C
12.7" (322 mm) 12.4" (315 mm)10.2" (259 mm)
7" (178 mm)
(81)3.2"
(81)3.2"
18.3"
29.3"
20.3"
32.7"
22.2"
36.1"
Chapter 1 Technical Data and Charts 21
(80)
9" (227 mm)
TOP CHASSIS
TOP CHASSCL CHASSIS
CL CHASSIS
B (775) (875) (975)
A
Type SV 180°
20.5"(520 mm)
20.5"(520 mm)
(238 mm)9.4"
39" (989 mm) 39" (989 mm)86" (2192 mm)
164" (4170 mm)
38.5"34.5"30.6"
64" (1624 mm) 64" (1624 mm)86" (2192 mm)
214" (5540 mm)
20.5"(520 mm)
20.5"(520 mm)
(238 mm)9.4"
3.1"
(785) (885) (985)38.8"34.8"30.9"
22 9/65 Technical Specifications Manual # 99905387
Swing Clearance Drawings
Single Link Swing Clearance
9°
15.6"
16.9"
21.4"
(341 mm)
TOP
13.4"
(545 mm)
(428 mm)
(397 mm)
CHASSIS
Chapter 1 Technical Data and Charts 23
Double Link Swing Clearance
11.5°
21.5"
14.7"
17.4"
18.7"
(341 mm)
TOP
13.4"
(545 mm)
(476 mm)
(443 mm)
(374 mm)
CHASSIS
25
In This Chapter
9/65 Pressure Settings ...............................................................25 9/65 Hydraulic Schematic...........................................................27
9/65 Pressure Settings
Working Pressure on Main-Relief Valve & Port-Relief Valves Function Direction Port 9/65 Pressure
psi (bar) Main-relief valve 4350 (300)
Slewing system Right A P
Left B P
Boom cylinder Down A 1450 (100)
Up B 4715 (325)
Jib cylinder Up A 4715 (325)
Down B 2900 (200)
Extension cylinders Extend A P
Retract B P
Rotator Right A 2900 (200)
Left B 2900 (200)
Grab Open A 2900 (200)
Close B 2900 (200)
Separate stabilizer valve All 2175 (150)
Working Pressure on Load-Holding Valves Function Direction Port 9/65 Opening
Pressure psi (bar)
Boom cylinder 4715 (325)
C H A P T E R 2
Pressure Settings & Hydraulic Schematics
26 9/65 Technical Specifications Manual # 99905387
Jib cylinder Up A 4785 (330)
Down B
Slewing system 3045 (210)
Extension cylinders Extend A 3045 (210)
Retract B 6235 (430)
Pressure Setting for Load Moment Limitation (LMB)
Load moment limitation (LMB) 4205 (290)
Maximum Pump Performance Pump performance, 1-circuit 10.5 gpm (40
l/min)
Chapter 2 Pressure Settings & Hydraulic Schematics 27
9/65 Hydraulic Schematic
A-PORT
A-POR T
A-POR T
A-POR T
C2 C1
V2 V1
Q-MODULT
P
A1 B1
A B
A-PORT
A-PORT
MM2M1 C1C2
V1V2
X4
X1
X2
X3
PstHPCO
M
A5
B5
A2
B2
A3
B3
A4
B4
A1
B1
A6
B6
584 78
584 78
58478
584 78
584 78
58478
58478
58478
584 78
58479
Opt ion
Tst
55255 / 55256 /55257 / 55258 /55259 / 55260 /55272 / 55273 /
55274
55296