Managing Industrial Networks with Cisco Networking ... · Managing Industrial Networks with Cisco Networking Technologies (IMINS) is a ... Networking Fundamentals for Industrial Control

SUNSET LEARNING INSTITUTE | 888.888.5251 | WWW.SUNSETLEARNING.COM

SUNSET LEARNING INSTITUTE

CLOUD TECHNOLOGY TRAINING PROVIDER EDUCATE. INNOVATE. OPTIMIZE.

Managing Industrial Networks with Cisco Networking Technologies 1.2 (IMINS)

COURSE OVERVIEW:

Managing Industrial Networks with Cisco Networking Technologies (IMINS) is a lab-based course which helps

students with the foundational skills needed for the management and administration of networked industrial control

systems. The IMINS course, developed in conjunction with Rockwell Automation, helps plant administrators, control

system engineers and traditional network engineers understand networking technologies that are needed in today’s

connected plants and enterprises. This course also helps you prepare for the Cisco Industrial Networking Specialist

Certification exam (exam ID200-401) and qualify for the Cisco Industrial Networking Specialist certification.

This course is job-role specific and enables you to achieve competency and skills to configure, maintain, and

troubleshoot industrial network systems while helping to ensure network availability, reliability, and Internet

security throughout your company. Students will be exposed to multiple industrial network technologies as well as

products from Cisco and other industrial suppliers including Rockwell Automation.

WHO WILL BENEFIT FROM THIS COURSE?

The primary audience for this course is as follows:

IT and OT professionals that will be involved with the implementation, operation and support of networked

industrial products and solutions for the following industries.

Manufacturing

Process control

Oil and gas industry

As well as other industries

PREREQUISITES:

The knowledge and skills that a learner must have before attending this course are as follows:

College degree or non-degreed qualified technician with two to three years’ experience or equivalent

industry experience

Basic understanding of networking and industrial fundamentals or attend ELT to achieve that level:

Networking Fundamentals for Industrial Control Systems (INICS)

Control Systems Fundamentals for Industrial Networking (ICINS)

RELATED COURSES:

Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2)




COURSE OBJECTIVES:

Upon completing this course, the learner will be able to meet these overall objectives:

Identify Cisco industrial networking solutions

Describe Cisco Industrial Ethernet switches, Rockwell Automation Stratix switches, and Cisco Connected

Grid switches and routers

Interpret design and drawings

Recognize zone and cell topologies

Install industrial network components

Deploy industrial network components

Perform basic maintenance tasks on the network

Troubleshoot network and control issues

COURSE OUTLINE:

Module 1: Industrial Networking Solutions and Products Lesson 1: Describing Cisco Industry-Specific Solutions

Internet of Everything

Internet of Things

Industrial Verticals

IoT and Manufacturing

Cisco Manufacturing Designs

Utilities Convergence

Cisco GridBlocks Architecture

Cisco Connected Grid Solution

IoT and Oil and Gas

Cisco Connected Oil Field Solution

IoT and Mining

Remote Drilling Operations

Connected Transportation Solutions

Cisco CTS 1.5

Summary




Lesson 2: Describing Industrial Networking Features

Industrial Networking Requirements

ANSI/TIA-1005 - M.I.C.E.

IP Code IEC 60529

NEMA 250

Industrial Automation Protocols

Common Industrial Protocol

PROFINET

MODBUS TCP

IEC 61850

IEC 618502-7-2: GOOSE

MMS: ISO 9506

Distributed Network Protocol 3

Real-Time Communication and Predictability

Time Stamping

Summary Lesson 3: Describing Industrial Switching Platforms

Cisco Industrial Switching Portfolio

Cisco IE 2000 and IE 2000U Series Switches

Cisco IE 2000 Series Ports and Connectors

Cisco IE 2000 IP67 Series Switches

Cisco IE 2000 IP67 Series Ports and Connectors

Stratix 5700 Switches

Cisco IE 3000 Series Switches

Cisco IE 3000 Series Switch Ports and Connectors

Cisco IE 3000 Series Switch CompactFlash Memory Card

Power Adapters

DIN Rail Mount

Rockwell Automation Stratix 8000 and 8300 Modular Managed Switches

Cisco IE 3010 Series Switches

Cisco CGS 2520 Series Connected Grid Switches

Cisco Catalyst 3750-X Series Switches

Summary Lesson 4: Describing Industrial Routing Platforms

WAN and Routers

Cisco 2010 Connected Grid Router

Cisco 1000 Series Connected Grid Routers

Cisco 819 Machine-to-Machine Integrated Services Routers

Allen-Bradley Stratix 5900 Services Router

Summary




Lesson 5: Describing Configuration and Management Tools

Cisco IOS Software Features and Functions

Cisco IOS Software CLI Functions

Help Functions in the CLI

GUI Configuration and Management Tools

Cisco Device Manager

Cisco Configuration Professional

Cisco Network Assistant

Automation Management Systems

RSLinx Classic

Studio 5000

TIA Portal

Summary Hardware Lab 1: Platform Discovery of Industrial Network Switches and Routers

Install the Cisco AnyConnect Secure Mobility Client

Remote Lab Connectivity

Explore Cisco IE 2000 Series Switch Hardware and Software

Explore Cisco IE 3000 Series Switch Hardware and Software

Explore Stratix 5700 Switch Hardware and Software

Create Community of Devices on Cisco Network Assistant

Explore Cisco CGS 2520, Cisco IE 2000U Series Switch and Cisco CGR-2010 Router Hardware and Software Lesson 6: Module Summary

Module 2: Industrial Network Documentation and Deployment Considerations Lesson 1: Interpreting Network and Control Designs and Drawings

Diagram Icons

Network Diagram

Terminal Block Diagram

Network Connectivity Table

Key Design Components

Summary Hardware Lab 2: Interpreting Network and Control Designs and Drawings

Interpret a Network Diagram

Assign Device IP Addresses




Lesson 2: Describing Industrial Networking Deployment Considerations

Industrial Environment Considerations

Safety Standards and Codes

Industrial Switch Topologies

Linear Topology

Star Topology

Redundant Star Topology

Ring Topology

Accessing Reference Materials

Summary Lesson 3: Module Summary

Module 3: Installing Industrial Network Switches, Routers, and Cabling Lesson 1: Understanding Cabling Installation and Testing for Industrial Networks

Overview of Structured Cabling

Understanding Grounding Systems

Ethernet LAN Connection Media

Ethernet Cabling in Industrial Networks

Guidelines for Ethernet Cable Installation

Ethernet Cable Connectors

Gigabit Ethernet Fiber Optic Transceivers

Guidelines for Ethernet Cable Testing

Guidelines for Cabling Identification and Documentation

Summary Lesson 2: Installing the Switch or Router

Cisco Device Documentation

Rockwell Automation Device Documentation

Device Mounting, Power Supply, and Environment Requirements

Evaluation of Location

10/100 and 10/100/1000 Ports

Validate the Cisco Device Using LEDs

Validate the Stratix 5700 Using LEDs

Console Start-up Log

Validate Device Installation





Module 4: Deploying Industrial Ethernet Devices Lesson 1: Configuring Initial Switch or Router Parameters

Console Management Ports

Terminal Emulators

Device Configuration

Summary Hardware Lab 3: Configuring Initial Switch Parameters


Configure Basic Parameters on the Cisco IE 2000 Series Switch

Configure Basic Parameters on the Stratix 5700 switch Lesson 2: Configuring Layer 2 Switch Parameters

Local Area Networks

Industrial LAN Components

Functions of the Switch in the Networks

Layer 2 Switching Process

VLANs Introduction

VLAN Trunking

VLAN Trunking Protocol

Issues in Redundant Topologies

Types of Spanning-Tree Protocols

Standard Templates of Advanced Features

Smartport Macro Configuration

Port Channel

Validating the Layer 2 Network

Summary Hardware Lab 4: Configuring Layer 2 Switch Parameters


Configure VLANs

Configure VLANs

Configure global Smartport macros on the Cisco IE 2000 and 3000, and the Stratix 5700

Configure interface Smartport macros on the Cisco IE 2000 and 3000, and the Stratix 5700

Configure Smartport macros on the Cisco IE 2000U and CGS-2520

Configure the Cisco REP on the Cisco IE 2000 and 3000, and the Stratix 5700

Configure the Cisco REP on the Cisco IE 2000U and CGS-2520 Lesson 3: Configuring Layer 3 Switch Parameters

IP Default Gateway

Configuring IP Addresses on Multiple SVIs

Layer 3 Routing on Switches

Verifying Routes

Validating Layer 3 Settings

Summary




Hardware Lab 5: Configuring IP and DHCP


Configure the SVI on the Cisco IE 2000 Series Switch, Cisco IE 3000 switch, and Stratix 5700 switch.

Configure DHCP on the Cisco IE 3000 Switch

Configure the SVI on the Cisco CGS-2520 Series Switch and SVI and DHCP on the Cisco IE 2000U Series Switch Lesson 4: Configuring Industrial Ethernet

PTP Clock Hierarchy

PTP profile

Configuring PTP

Common Industrial Protocol

Locate and Verify EDS Files

PROFINET

PROFINET GSD File

PROFINET Management in Cisco IE Switches

Configure PROFINET

Configure MODBUS TCP

Summary Lesson 5: Installing End-Point Devices

Identify the Device

Evaluation of Location

Test and Validate the Device from CLI

Test and Validate the End-Device from the Diagnostic Web Page

Test and Validate the End-Device from Studio 5000

Summary Hardware Lab 6: Configuring PTP


Configure and Verify PTP on the Cisco IE 2000 Series Switch

Verify PTP on the Cisco IE 3000 Series Switch

Configure and Verify PTP on the Cisco IE 2000U Series Switch

Configure and Verify PTP on the Cisco CGS-2520 Series Switch Hardware Lab 7: Configuring CIP


Locate the EDS File

Configure CIP on the Cisco IE 2000, IE 3000 and Stratix 5700 Series Switches

Download a Project File to a PLC

Validate I/O Connection to the Stratix 5700 Switch

Use FactoryTalk View to Manage the Stratix 5700 Switch Hardware Lab 8: Configuring MODBUS TCP


Configure the MODBUS TCP Server on CGS-2520

Verify the MODBUS TCP Connectivity




Lesson 6: Cyber Security

Basic Network Parameters

Assets to Protect

Threats

Security Approach

Assess the Network

Security Policy

Network Device Threats

Network Device Security Components

Software Updates

Port Security

VLAN Design Considerations

Traffic Filtering with ACLs

Firewall

Intrusion Prevention System

VPNs and Benefits

IPSec

Cisco SSL VPN Solutions

Document Security Incidents

Summary Hardware Lab 9: Configuring Switch Security


Configure Enable Secret

Configure Local Users

Disable Unused Ports

Configure ACL Hardware Lab 10: Configuring SSH and HTTPS


Configure SSH

Configure HTTPS Lesson 7: Module Summary

Module 5: Maintaining Industrial Ethernet Networks Lesson 1: Maintenance Tasks for Industrial Infrastructure Devices

Collect Asset Inventory Information

Using CLI to Collect Asset Inventory Information

Using Device Manager to Collect Asset Inventory Information

Using Cisco Network Assistant to Collect Asset Inventory Information

Using Rockwell Studio 5000 to Collect Asset Inventory Information

Change Management Process

Change Management Documentation

Summary




Lesson 2: Monitoring End-Device Operations

Switch Port LEDs

Identify Network Status of an End-Device Using Device Manager

Identify Network Status of an End-Device Using CLI

Monitor Interface Counters

Monitor QoS Policies

Summary Lesson 3: Working with Cisco Configuration Files and Software Images

Manage Cisco IOS Configuration

CLI Backup and Restore

Replace Running Configuration

Flash Memory on Industrial Ethernet Switches

Summary Hardware Lab 11: Maintaining Industrial Ethernet Switches


Collect Asset Inventory Data

Identify Network Status of an End-device

Monitor QoS Policies

Configuration Back-up and Restore

Configuration Back-up and Restore from the SD Card

Cisco IOS Upgrade Lesson 4: Module Summary

Module 6: Troubleshooting Industrial Ethernet Networks Lesson 1: Monitoring System Status

Common Troubleshooting Approaches

CPU Utilization

Troubleshoot Memory Issues

View Syslog

Read Syslog Messages

View Event Log from RSLinx Classic

Summary Lesson 2: Troubleshooting Layer 1

Tools for Layer 1 Troubleshooting

Cable Analyzers

Common Symptoms and Causes of Failure

Summary




Lesson 3: Troubleshooting Layer 2

Using LEDs to Troubleshoot Layer 2

Troubleshoot Speed and Duplex Issues

Troubleshoot Error Disabled Ports

Summary Hardware Lab 12: Troubleshooting Layer 2 Network Issues


Analyze Network

Load a Network Problem

Find the Problem Lesson 4: Troubleshooting Layer 3

Common Troubleshooting Tools

Identify Layer 3 Routes

Determine the Communication Path

Nonfunctional Network Nodes

Perform a Packet Capture

Summary Hardware Lab 13: Troubleshooting Layer 3 Network Issues


Analyze Network

Find the Problem Lesson 5: Basic Troubleshooting for Industrial Endpoints Overview

Switch Status

Summary Hardware Lab 14: Troubleshooting Control Issues



Solve the Problem


Solve the Problem Lesson 6: Describe Troubleshooting with Vendor Support Overview

Information for Vendor Escalation

Obtain Serial Number and Device Model Number

Locate Software Release Version

Generate Show Tech-Support Output

Create a Cisco TAC Support Case

Rockwell Automation Support Center





SUNSET LEARNING INSTITUTE (SLI) DIFFERENTIATORS:

Sunset Learning Institute (SLI) has been an innovative leader in developing and delivering authorized technical

training since 1996. Our goal is to help our customers optimize their cloud technology investments by providing

convenient, high quality technical training that our customers can rely on. We empower students to master their

desired technologies for their unique environments.

What sets SLI apart is not only our immense selection of trainings options, but our convenient and consistent delivery

system. No matter how complex your environment is or where you are located, SLI is sure to have a training solution

that you can count on!

Premiere World Class Instruction Team

All SLI instructors have a four-year technical degree, instructor level certifications and field consulting work

experience.

Sunset Learning has won numerous Instructor Excellence and Instructor Quality Distinction awards since

2012

Enhanced Learning Experience

The goal of our instructors during class is ensure students understand the material, guide them through our

labs and encourage questions and interactive discussions.

Convenient and Reliable Training Experience

You have the option to attend classes at any of our established training facilities or from the convenience

of your home or office with the use of our HD-ILT network (High Definition Instructor Led Training)

All Sunset Learning Institute classes are guaranteed to run – you can count on us to deliver the training you

need when you need it!

Outstanding Customer Service

Dedicated account manager to suggest the optimal learning path for you and your team

Enthusiastic Student Services team available to answer any questions and ensure a quality training

experience

Documents

Managing Industrial Networks with Cisco Networking ... · Managing Industrial Networks with Cisco Networking Technologies (IMINS) is a ... Networking Fundamentals for Industrial Control