Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
109 East Front 304Traverse City, MI 49684231 947.1236
The Town of Mammoth LakesCalifornia
Prepared by
All ideas, designs, arrangements and plans indicated or represented by these
drawings are owned by, and property of the The Town of Mammoth Lakes, CA
and Corbin Design and were created, evolved and developed for use on and in
connection with the specified project. None of such ideas, designs, arrangements
or plans shall be used by or disclosed to any person, firm or corporation for any
purpose whatsoever without the written permission of Corbin Design and The Town
of Mammoth Lakes, CA.
These drawings are considered design-intent and are not for construction.
Written dimensions on these drawings have precedence over scaled dimensions.
The further development and engineering of the design-intent drawings is
expected to be shown in the Fabricator’s submitted shop drawings. Contractors
shall verify and be responsible for all dimensions and conditions on the job.
Corbin Design should be notified of any variations from the dimensions and conditions
shown by these drawings prior to the execution of any work, including changes
to graphic designs or typography.
corbindesign
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18-20
Graphics Standards
Sign Type Array
Beam Assembly Detail
Sign Type 1
Sign Type 2 elevation
Sign Type 2 exploded view
Sign Type 3
Sign Type 4
Sign Type 5
Sign Type 5a
Sign Type 5b
Sign Type 6
Sign Type 6a
Sign Type 7
Sign Type 8
Post Details for sign types 6, 7 & 8
Adjustable Frame Details for sign types 6, 7 & 8
Engineering Specifications
Sheet NumberSheet Description
Design Intent Drawings for Trail &Node Signage Design Guideline
December 16, 2009
Mammoth Lakes Recreational Signage& Wayfinding System
Restrooms
Fabricator is responsible for matching all colors and materials as specified and are required to provide color and material samples to Corbin for approval.
CAUTION! CONSISTENT AND ACCURATE COLOR REPRODUCTION IN THIS DOCUMENT CANNOT BE ASSURED DUE TO THE LIMITATIONS OF COLOR COPYING TECHNOLOGY.
Pantone Matching System:
Matthews Paint:
Exterior grade opaque vinyl:
---
MP07455
---
---
MP00811
---
---
MP11477
White 7125-10
03 Mammoth Resort 04 White
Hiking Dogs onLeash
Cross-CountrySki Trail
Snow Shoe Picnic Area Cycling PublicParking
ArrowDo NotEnter
Information*U. S.
Forest Servicethe Town of
Mammoth Lakes
TYPOGRAPHY (Editable)Fabricator is responsible for acquiring project related fonts.
COLOR PALETTEFabricator is responsible for supplying samples for all colors within the palette.
Steel SpecificationsFabricator is responsible for supplying samples for all colors within the palette.
SYMBOLSDesigner will provide scalable electronic artworkfor all symbols in a vector art (outlined) format.
All symbols used in this program have been approved by the National Park Service and can be downloaded fromtheir website www.nps.gov/hfc/carto/map-symbols.htm (except “Information” symbol).
02 US Forest Service
---
MP06916
---
01 Town of Mammoth Lakes
---
MP00857
---
05 Brown
06 Steel Finish
LOGOSDesigner will provide scalable electronic artworkfor all logos in a vector art (outlined) format.
Century Gothic BoldAa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll MmNn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz1 2 3 4 5 6 7 8 9 0
Century Gothic RegularAa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll MmNn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz1 2 3 4 5 6 7 8 9 0
Clearview Highway 1BAa Bb Cc Dd Ee Ff Gg Hh Ii Jj Kk Ll MmNn Oo Pp Qq Rr Ss Tt Uu Vv Ww Xx Yy Zz1 2 3 4 5 6 7 8 9 0
The Coated Pantone Matching System®, Matthews and/or Akzo Nobel Paint system is used for specifying signage color matches. (In the absence of actual sign material color chip reference sets, actual specified product color swatches should be referenced for color matching.)
Shown here are approximations of the primary signage background colors and supporting accent colors. Actual color finishes on signage must be matte or low luster (not shiny or glossy) and exclusively a premium acrylic polyurethane.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
AccessibleSymbol
Town of Mammoth Lakes
US Forest Service
Mammoth Resort
White
Brown
Steel Finish
n.t.s.
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Graphic Standards
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Steel Type: Structural Steel
Surface Treatment: Lightly wire brush to remove scale. Clean with acetone to remove construction markings.
Finish: Natural, wiped with light coat of oil
Fasteners: Steel with blackened finish
Signage paints produced by MPC Matthews Paint and Akzo Nobel Paint Company are to be the standard reference.
Vinyl Films from 3M and Avery Graphics are to be the standard.
Color application varies per sign type. Refer to drawings for appropriate application.
IMS Industrial Metal Supply Company8300 San Fernando Rd.Sun Valley, CA 91352Phone: 818-729-3333Fax: 818-729-3334Email: www.imsmetals.comContact: Neil Sherman
Steel Supplier:
1
03.03.09 Design Intent
Mammoth Lakes
WelcomeCenterRangerStationTourism &Rec DeptMain Path
Welcome Ctr
Mammoth Lakes
RangerStation
Restrooms
Main Path
Tourism &Rec. Dept.
Main PathTRAILHEAD
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Designated trail users only
Mammoth LakesWelcome Center
Open Daily 8:00am to 5:00pm
Information and MapsPermitsLodging informationBookstoreForest Service Business
Welcome CenterRanger StationTourism & Rec. Dept.Lower Parking Lot
Mammoth Lakes
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Vehicular Guide (vertical)Vehicular Guide (horizontal)Portal Identi�cation Marker Pedestrian Guide
TYPE 1 TYPE 5 TYPE 5a TYPE 5b
Trail Information Kiosk Access/EgressInformation Sign
Trail Guide(primary)
Trail Guide(secondary)
InterpretiveKiosk
Regulatory
TYPE 2
Park ID Marker
TYPE 3 TYPE 4 TYPE 6 TYPE 6a TYPE 7 TYPE 8
DO NOTENTER
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
n.t.s.
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Sign Type Array
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
2
03.03.09 Design Intent
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
n.t.s.
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post and Beam AssemblyDetails
Client
Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
MOUNTING BRACKETSteel plates welded to beam.Plate thickness to match steelbeam wall thickness.
MECHANICAL ASSEMBLY DETAIL
BID ALTERNATE
WELDED ASSEMBLYDETAIL
Angle brackets welded directlyto beams. Brackets arerecessed from the edge
to accomodate weld.
UPPER CROSS MEMBERStructural steel wide flange beam with
custom cut decorative end detail
Concept design inspirationConcept design inspiration
POST EXTENSIONStructural steel wide flange beam withcustom cut decorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
STRUCTURAL BEAMSStructural steel wide flange beam.
MECHANICAL FASTENERSSteel nuts, washers and bolts. Bolts to not
extend beyond nut by more than 1/2”.All bolt heads to face inside of beam.
All fasteners to have blackened finish.
3
03.03.09 Design Intent
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5Vehicular Guide (horizontal)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
5" x 5" steel beam construction
5" x 5" steel beam construction
5" x 5" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 1Portal identification Marker
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth MountainWhite
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5aVehicular Guide (vertical)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Welcome CenterRanger StationTourism & Rec. Dept.Lower Parking Lot
Mammoth Lakes
Mammoth Lakes
WelcomeCenterRangerStationTourism &Rec DeptMain Path
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
FONTSClearview Hwy 1-B, 3 1/2" capCentury Gothic Bold, 2 1/2" cap
FONTSClearview Hwy 1-B,Century Gothic Regular, and C.G. Bold,and Bold Italic
FONTSClearview Hwy 1-B, 4" capCentury Gothic Bold, 3" cap
MOUNTING BRACKET3/8" thick plate steel tabs
POST SUPPORTBRACKET3/8” thick welded side and1/2” thick steel bottom plates.OPTION: bolt and weld supportbracket to post
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
MOUNTING BRACKET3/8" thick plate steel tabs
POST SUPPORTBRACKET3/8” thick welded side and1/2” thick steel bottom plates.OPTION: bolt and weld supportbracket to post
LOWER CROSSMEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
POST SUPPORTBRACKET3/8” thick welded sideand 1/2” thick steelbottom plates.OPTION: bolt andweld supportbracket to post
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/8" thick aluminum panels*or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/4" thick aluminum panels*or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/8" thick aluminum panels*or equivalent
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
13'-6"
8'-10"
8"
5"
10"
8"
5"
2'-0"2'-0"
1'-0"
9"
4" 6"
3 1/4"
6"
9"
6'-6"
60°
60°
1 1/2"
1 1/2"
4 3/4"
2 1/2"
4 3/4"
4 5/8"
10"
1 1/2"2 1/2"3 3/4"2 1/4"
2"2 1/4"
3 1/4"
5"
10"
8"
1'-0"
9"
4" 6"
3 1/4"
6"
9"
5"
10"
8"
1'-0"
9"
4"6"
3 1/4"
9"
5" 10"5" 10"2"
06
01
04
12'-4"
7'-6"
05
5'-2"
4" 5"2 1/2"
14'-4"
4'-9"
2'-10"
05
05
01
04
01
04
06
06
5"
7"
1'-0"3"
4"
5"
2 1/2"
4'-0"
6'-6"
5 1/2"
7 3/8"
2'-8"
1 1/2"
1 1/2"
1'-2"
4'-2"
7'-4"
3"
9 3/8"
2 1/2"
5"
4 3/4"
7 3/8"
2 1/2" 2 1/2"
4 3/4"
4'-8"
1'-9"
2'-4"
7"
4"FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
7'-4"
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
4
03.03.09 Design Intent
3/4" = 1'-0" (on an 11 x 17 sheet)
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
3" x 3" steel beam construction 4" x 4" steel beam construction
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 7Interpretive Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 3Park ID Marker
Client
The Town ofMammoth LakessCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 ElevationTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 Exploded ViewTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Mammoth LakesWelcome Center
Open Daily 8:00am to 5:00pm
Information and MapsPermitsLodging informationBookstoreForest Service Business
Main PathTRAILHEAD
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5bPedestrian Guide
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"
9"
7"
3"5"
2" Welcome Ctr
Mammoth Lakes
Mammoth LakesSign System
RangerStation
Restrooms
Main Path
Tourism &Rec. Dept.
FONTSClearview Hwy 1-B, 2 1/2" capCentury Gothic Bold, 1 3/4" cap
AccessInformationAvailable
Designated trail users only
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Inte
rpre
tive P
anel
TBD
Posti
ng Boar
d Mounte
d
to b
ack o
f Sig
n Cab
inet
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
05
01
05
04
01
06
2"
6"
2'-9"
3'-6"
2'-6"
2'-2"
2'-0"
4"
4'-6 "
5 1/4"
3"
4'-6"
5 1/4"
4"
1 1/2"
3/4"
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 1/2" capCentury Gothic Bold Italic, 1 1/2" cap
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 7/8"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Highway 2B
1'-6"
06
01
05
08
04
12'-0"
3'-6"
2'-0"
6'-3"
6"
6 3/4"
3"
3"
1 3/4"
4 1/2"
1 1/2"
2"1 1/2"
1"
5"
6"
9'-4"
1'-4"
1'-9"
4'-4" 4'-4"
8'-0"
3 1/
2"
1 3/
4"
1 1/
2"
2"
1'-0"
3'-0"
3"
01
04
06
05
7 1/2"
1 3/4"
4 1/2"
3 1/2"
2 1/2"1 1/4"
6'-6"
3 1/4"
1'-9"
5"
1'-4"
6"
8"
3"
1 3/4"2"
3 1/4"
5"
2'-0"
see enlargedlayout
4 3/4"
3/4"
3/4"
2"
3/4"3/4"
1"
2"
1/2"1/2"1/4"
4 3/4" 1"
4'-8"
1'-10"
1'-4"
1'-2"
6'-4"
3'-6"
1"
1"
30.00°
8" 3"
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"9"
7"
3"5"
2"
5"
7"
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
MOUNTING BRACKET1/4" thick plate steel tabs
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
EXPLODED VIEWSee Type 3 Exploded View Sheet
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
5"
DIRECT BURY POSTSFootings to be level with grade.Width and depth to meet or exceedlocal sign code requirements.Below grade post length to bedetermined by fabricator.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF MOUNTING POINTSMechanical spacers to supportcorrugated metal roof
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF CROSS MEMBERS2" x 2" Square steel tubingwelded to Canopy Supports.
ROOF CROSS MEMBERS2" x 2" Square steel tubing
welded to Canopy Supports.
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOF CAPStainless steel roof cap installedover top beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
3"7 1/4"
5 1/2"
2 1/2" 3 1/2"
2"
3 1/
2"
5 1/2"
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
POSTING BOARDExterior grade syntheticposting board and drip rail.
POSTING BOARDExterior grade 1/2" thickDark Grey synthetic postingboard. Inset 1" from theedge on all sides.
Back ViewSide View
DRIP RAILAluminum drip rail
mechanically fastenedto Sign Cabinet. Paintedto match Posting Board
9"
7"
1"2"
3"5"
1 7/8"
1 1/2"
2 1/8"
2 1/8"
ROOF CAPStainless steel metal roofcap fastened above corrugated roof
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanicalfasteners.
AccessInformationAvailable
Designated trail users only
See BEAM ASSEMBLY DETAIL on sheet 33" x 3" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
5
03.03.09 Design Intent
3/4" = 1'-0" (on an 11 x 17 sheet)
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
3" x 3" steel beam construction 4" x 4" steel beam construction
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 7Interpretive Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 3Park ID Marker
Client
The Town ofMammoth LakessCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 ElevationTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 Exploded ViewTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Mammoth LakesWelcome Center
Open Daily 8:00am to 5:00pm
Information and MapsPermitsLodging informationBookstoreForest Service Business
Main PathTRAILHEAD
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5bPedestrian Guide
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"
9"
7"
3"5"
2" Welcome Ctr
Mammoth Lakes
Mammoth LakesSign System
RangerStation
Restrooms
Main Path
Tourism &Rec. Dept.
FONTSClearview Hwy 1-B, 2 1/2" capCentury Gothic Bold, 1 3/4" cap
AccessInformationAvailable
Designated trail users only
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Inte
rpre
tive P
anel
TBD
Posti
ng Boar
d Mounte
d
to b
ack o
f Sig
n Cab
inet
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
05
01
05
04
01
06
2"
6"
2'-9"
3'-6"
2'-6"
2'-2"
2'-0"
4"
4'-6 "
5 1/4"
3"
4'-6"
5 1/4"
4"
1 1/2"
3/4"
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 1/2" capCentury Gothic Bold Italic, 1 1/2" cap
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 7/8"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Highway 2B
1'-6"
06
01
05
08
04
12'-0"
3'-6"
2'-0"
6'-3"
6"
6 3/4"
3"
3"
1 3/4"
4 1/2"
1 1/2"
2"1 1/2"
1"
5"
6"
9'-4"
1'-4"
1'-9"
4'-4" 4'-4"
8'-0"
3 1/
2"
1 3/
4"
1 1/
2"
2"
1'-0"
3'-0"
3"
01
04
06
05
7 1/2"
1 3/4"
4 1/2"
3 1/2"
2 1/2"1 1/4"
6'-6"
3 1/4"
1'-9"
5"
1'-4"
6"
8"
3"
1 3/4"2"
3 1/4"
5"
2'-0"
see enlargedlayout
4 3/4"
3/4"
3/4"
2"
3/4"3/4"
1"
2"
1/2"1/2"1/4"
4 3/4" 1"
4'-8"
1'-10"
1'-4"
1'-2"
6'-4"
3'-6"
1"
1"
30.00°
8" 3"
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"9"
7"
3"5"
2"
5"
7"
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
MOUNTING BRACKET1/4" thick plate steel tabs
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
EXPLODED VIEWSee Type 3 Exploded View Sheet
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
5"
DIRECT BURY POSTSFootings to be level with grade.Width and depth to meet or exceedlocal sign code requirements.Below grade post length to bedetermined by fabricator.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF MOUNTING POINTSMechanical spacers to supportcorrugated metal roof
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF CROSS MEMBERS2" x 2" Square steel tubingwelded to Canopy Supports.
ROOF CROSS MEMBERS2" x 2" Square steel tubing
welded to Canopy Supports.
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOF CAPStainless steel roof cap installedover top beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
3"7 1/4"
5 1/2"
2 1/2" 3 1/2"
2"
3 1/
2"
5 1/2"
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
POSTING BOARDExterior grade syntheticposting board and drip rail.
POSTING BOARDExterior grade 1/2" thickDark Grey synthetic postingboard. Inset 1" from theedge on all sides.
Back ViewSide View
DRIP RAILAluminum drip rail
mechanically fastenedto Sign Cabinet. Paintedto match Posting Board
9"
7"
1"2"
3"5"
1 7/8"
1 1/2"
2 1/8"
2 1/8"
ROOF CAPStainless steel metal roofcap fastened above corrugated roof
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanicalfasteners.
AccessInformationAvailable
Designated trail users only
See BEAM ASSEMBLY DETAIL on sheet 33" x 3" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
6
03.03.09 Design Intent
3/4" = 1'-0" (on an 11 x 17 sheet)
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
3" x 3" steel beam construction 4" x 4" steel beam construction
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 7Interpretive Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 3Park ID Marker
Client
The Town ofMammoth LakessCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 ElevationTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 Exploded ViewTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Mammoth LakesWelcome Center
Open Daily 8:00am to 5:00pm
Information and MapsPermitsLodging informationBookstoreForest Service Business
Main PathTRAILHEAD
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5bPedestrian Guide
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"
9"
7"
3"5"
2" Welcome Ctr
Mammoth Lakes
Mammoth LakesSign System
RangerStation
Restrooms
Main Path
Tourism &Rec. Dept.
FONTSClearview Hwy 1-B, 2 1/2" capCentury Gothic Bold, 1 3/4" cap
AccessInformationAvailable
Designated trail users only
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Inte
rpre
tive P
anel
TBD
Posti
ng Boar
d Mounte
d
to b
ack o
f Sig
n Cab
inet
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
05
01
05
04
01
06
2"
6"
2'-9"
3'-6"
2'-6"
2'-2"
2'-0"
4"
4'-6 "
5 1/4"
3"
4'-6"
5 1/4"
4"
1 1/2"
3/4"
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 1/2" capCentury Gothic Bold Italic, 1 1/2" cap
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 7/8"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Highway 2B
1'-6"
06
01
05
08
04
12'-0"
3'-6"
2'-0"
6'-3"
6"
6 3/4"
3"
3"
1 3/4"
4 1/2"
1 1/2"
2"1 1/2"
1"
5"
6"
9'-4"
1'-4"
1'-9"
4'-4" 4'-4"
8'-0"
3 1/
2"
1 3/
4"
1 1/
2"
2"
1'-0"
3'-0"
3"
01
04
06
05
7 1/2"
1 3/4"
4 1/2"
3 1/2"
2 1/2"1 1/4"
6'-6"
3 1/4"
1'-9"
5"
1'-4"
6"
8"
3"
1 3/4"2"
3 1/4"
5"
2'-0"
see enlargedlayout
4 3/4"
3/4"
3/4"
2"
3/4"3/4"
1"
2"
1/2"1/2"1/4"
4 3/4" 1"
4'-8"
1'-10"
1'-4"
1'-2"
6'-4"
3'-6"
1"
1"
30.00°
8" 3"
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"9"
7"
3"5"
2"
5"
7"
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
MOUNTING BRACKET1/4" thick plate steel tabs
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
EXPLODED VIEWSee Type 3 Exploded View Sheet
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
5"
DIRECT BURY POSTSFootings to be level with grade.Width and depth to meet or exceedlocal sign code requirements.Below grade post length to bedetermined by fabricator.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF MOUNTING POINTSMechanical spacers to supportcorrugated metal roof
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF CROSS MEMBERS2" x 2" Square steel tubingwelded to Canopy Supports.
ROOF CROSS MEMBERS2" x 2" Square steel tubing
welded to Canopy Supports.
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOF CAPStainless steel roof cap installedover top beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
3"7 1/4"
5 1/2"
2 1/2" 3 1/2"
2"
3 1/
2"
5 1/2"
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
POSTING BOARDExterior grade syntheticposting board and drip rail.
POSTING BOARDExterior grade 1/2" thickDark Grey synthetic postingboard. Inset 1" from theedge on all sides.
Back ViewSide View
DRIP RAILAluminum drip rail
mechanically fastenedto Sign Cabinet. Paintedto match Posting Board
9"
7"
1"2"
3"5"
1 7/8"
1 1/2"
2 1/8"
2 1/8"
ROOF CAPStainless steel metal roofcap fastened above corrugated roof
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanicalfasteners.
AccessInformationAvailable
Designated trail users only
See BEAM ASSEMBLY DETAIL on sheet 33" x 3" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
7
03.03.09 Design Intent
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6Trail Guide (primary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 4Access/Egress Information Sign
Client
The Town ofMammoth Lakes California
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
07
08
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 8Regulatory
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
3/4" = 1'-0" (on an 11 x 17 sheet)
2" x 2" structural steel "L" beams
2" x 2" square structural steel
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
06
07
07
08
09
01
02
3/8" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Frame Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6aTrail Guide (secondary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
03
04
05
06
07
08
08
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
GRAVITY LOCK3/8" thick plate aluminum withanodized finish. Latch to swingopen and closed positions.
LOCKING UNIT IN PLACEThrough holes to allow for pad lockat end of latch stop.
Latch stop
GRAVITY LOCKSee detail on this page
MESSAGE PANEL1/8" thick aluminum panel MESSAGE PANEL
1/8" thick aluminum panel
GUIDE FRAMEAluminum frame to slide freely along sign post.With welded Gravity Lock and Handle Supports.Circular holes cut to lighted assembly.
HANDLEAluminum round bar stock withpowder coated finish. Edges that mountto Guide Frame are cut flat. 3/16" Gusset panelswelded between Handle and Guide Frame tocreate Message panel mounting point
Round bar cut flat along this edge. Gravity Lock supports
Handle Gussets
Message Panelmounted to handleusing stainless steelmechanical hardware
ATTENTIONLatch must swing open freelyand stop at this open position.
Back View Side View (latch open) Side View (latch closed)
Back View Side View(open to locked onto rung)
Side View(closed to bypass rung)
hole
Holes
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
DO NOTENTER
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.Welded end cap to close post.
THREADED RODS1" diameter x 1 1/4" widethreaded aluminum rods.To join both Vertical Postswith exposed mechanicalfasteners (3/8" steel roundhex head screws.)
POSTS SUPPORTS2" x 2" structural steel withholes drilled to accept mountinghardware for threaded rods.Exposed corners are cut to45˚ angle.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
04
07
09
06
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Cop
yrig
ht ©
200
9 Je
ffry
Cor
bin
Des
ign,
Inc
.Pa
tent
Pen
ding
.
Copyright © 2009 Jeffry Corbin Design, Inc. Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
VERTICAL POSTS2" x 2" structural steel with holes
drilled to accept mountinghardware for threaded rods.
06
01
05
05
08
04
10'-0"
FONTSCentury Gothic Bold, 3" capClearview Hwy 2-B, 1 1/2" & 1/2" cap
06
6"
12" x 18"
18" x 24"
3"
Adj
usta
ble
heig
ht r
ange
Type
4 a
nd T
ype
6
2"
5 1/4"
12'-0"
1'-0"
3'-0"
1"
Adj
usta
ble
heig
ht r
ange
Type
8 s
tand
ard
regu
lato
ry s
igns
06
07
04
05
01
08
1"
1 1/
4"
2"
1"4"
1'-4"
4 1/2" 1"
1"
1"
4 1/2"
1"
2 1/4"
1"
3"
1'-1 5/8"
1 1/2"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
FONTSClearview Hwy 2-B
1 1/2"
1"3/4"
1 1/2"
1'-0"
2'-0"
1'-6"
1 5/8"
2 1/2"
1 3/4"
4'-0"
1"
1 1/
4"
2"
1" 1"
4"
1'-4"
2 1/4"
1"
1 1/2"
4'-0"
1 1/2"
2"
1 1/2"
1 1/4"1/2"
1 1/2"
3/4"1"
2"
1 1/2"
07
01
08
06
04
5"
3'-5"
2"
4'-0"
5"
1 1/
4"
1 1/2"
3/4"
1/2"1/2"
1/4"
Center vertically in brown band
Center type horizontally on sign panel
Center type horizontally on sign panel
Center arrow inbrown band
1"
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California..
8
03.03.09 Design Intent
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5Vehicular Guide (horizontal)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
5" x 5" steel beam construction
5" x 5" steel beam construction
5" x 5" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 1Portal identification Marker
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth MountainWhite
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5aVehicular Guide (vertical)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Welcome CenterRanger StationTourism & Rec. Dept.Lower Parking Lot
Mammoth Lakes
Mammoth Lakes
WelcomeCenterRangerStationTourism &Rec DeptMain Path
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
FONTSClearview Hwy 1-B, 3 1/2" capCentury Gothic Bold, 2 1/2" cap
FONTSClearview Hwy 1-B,Century Gothic Regular, and C.G. Bold,and Bold Italic
FONTSClearview Hwy 1-B, 4" capCentury Gothic Bold, 3" cap
MOUNTING BRACKET3/8" thick plate steel tabs
POST SUPPORTBRACKET3/8” thick welded side and1/2” thick steel bottom plates.OPTION: bolt and weld supportbracket to post
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
MOUNTING BRACKET3/8" thick plate steel tabs
POST SUPPORTBRACKET3/8” thick welded side and1/2” thick steel bottom plates.OPTION: bolt and weld supportbracket to post
LOWER CROSSMEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
POST SUPPORTBRACKET3/8” thick welded sideand 1/2” thick steelbottom plates.OPTION: bolt andweld supportbracket to post
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/8" thick aluminum panels*or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/4" thick aluminum panels*or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/8" thick aluminum panels*or equivalent
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
13'-6"
8'-10"
8"
5"
10"
8"
5"
2'-0"2'-0"
1'-0"
9"
4" 6"
3 1/4"
6"
9"
6'-6"
60°
60°
1 1/2"
1 1/2"
4 3/4"
2 1/2"
4 3/4"
4 5/8"
10"
1 1/2"2 1/2"3 3/4"2 1/4"
2"2 1/4"
3 1/4"
5"
10"
8"
1'-0"
9"
4" 6"
3 1/4"
6"
9"
5"
10"
8"
1'-0"
9"
4"6"
3 1/4"
9"
5" 10"5" 10"2"
06
01
04
12'-4"
7'-6"
05
5'-2"
4" 5"2 1/2"
14'-4"
4'-9"
2'-10"
05
05
01
04
01
04
06
06
5"
7"
1'-0"3"
4"
5"
2 1/2"
4'-0"
6'-6"
5 1/2"
7 3/8"
2'-8"
1 1/2"
1 1/2"
1'-2"
4'-2"
7'-4"
3"
9 3/8"
2 1/2"
5"
4 3/4"
7 3/8"
2 1/2" 2 1/2"
4 3/4"
4'-8"
1'-9"
2'-4"
7"
4"FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
7'-4"
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
9
03.03.09 Design Intent
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5Vehicular Guide (horizontal)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
5" x 5" steel beam construction
5" x 5" steel beam construction
5" x 5" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 1Portal identification Marker
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth MountainWhite
Brown
Steel Finish
1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5aVehicular Guide (vertical)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Welcome CenterRanger StationTourism & Rec. Dept.Lower Parking Lot
Mammoth Lakes
Mammoth Lakes
WelcomeCenterRangerStationTourism &Rec DeptMain Path
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
FONTSClearview Hwy 1-B, 3 1/2" capCentury Gothic Bold, 2 1/2" cap
FONTSClearview Hwy 1-B,Century Gothic Regular, and C.G. Bold,and Bold Italic
FONTSClearview Hwy 1-B, 4" capCentury Gothic Bold, 3" cap
MOUNTING BRACKET3/8" thick plate steel tabs
POST SUPPORTBRACKET3/8” thick welded side and1/2” thick steel bottom plates.OPTION: bolt and weld supportbracket to post
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
MOUNTING BRACKET3/8" thick plate steel tabs
POST SUPPORTBRACKET3/8” thick welded side and1/2” thick steel bottom plates.OPTION: bolt and weld supportbracket to post
LOWER CROSSMEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
POST SUPPORTBRACKET3/8” thick welded sideand 1/2” thick steelbottom plates.OPTION: bolt andweld supportbracket to post
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/8" thick aluminum panels*or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/4" thick aluminum panels*or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign bodySignComp Sign Extrusions* Series 3 Access Body Part #1290 Bleed Cover Part #1692 1/8" thick aluminum panels*or equivalent
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
13'-6"
8'-10"
8"
5"
10"
8"
5"
2'-0"2'-0"
1'-0"
9"
4" 6"
3 1/4"
6"
9"
6'-6"
60°
60°
1 1/2"
1 1/2"
4 3/4"
2 1/2"
4 3/4"
4 5/8"
10"
1 1/2"2 1/2"3 3/4"2 1/4"
2"2 1/4"
3 1/4"
5"
10"
8"
1'-0"
9"
4" 6"
3 1/4"
6"
9"
5"
10"
8"
1'-0"
9"
4"6"
3 1/4"
9"
5" 10"5" 10"2"
06
01
04
12'-4"
7'-6"
05
5'-2"
4" 5"2 1/2"
14'-4"
4'-9"
2'-10"
05
05
01
04
01
04
06
06
5"
7"
1'-0"3"
4"
5"
2 1/2"
4'-0"
6'-6"
5 1/2"
7 3/8"
2'-8"
1 1/2"
1 1/2"
1'-2"
4'-2"
7'-4"
3"
9 3/8"
2 1/2"
5"
4 3/4"
7 3/8"
2 1/2" 2 1/2"
4 3/4"
4'-8"
1'-9"
2'-4"
7"
4"FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
7'-4"
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 35" x 5" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
10
03.03.09 Design Intent
3/4" = 1'-0" (on an 11 x 17 sheet)
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
3" x 3" steel beam construction 4" x 4" steel beam construction
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 7Interpretive Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 3Park ID Marker
Client
The Town ofMammoth LakessCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 ElevationTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 Exploded ViewTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Mammoth LakesWelcome Center
Open Daily 8:00am to 5:00pm
Information and MapsPermitsLodging informationBookstoreForest Service Business
Main PathTRAILHEAD
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5bPedestrian Guide
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"
9"
7"
3"5"
2" Welcome Ctr
Mammoth Lakes
Mammoth LakesSign System
RangerStation
Restrooms
Main Path
Tourism &Rec. Dept.
FONTSClearview Hwy 1-B, 2 1/2" capCentury Gothic Bold, 1 3/4" cap
AccessInformationAvailable
Designated trail users only
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Inte
rpre
tive P
anel
TBD
Posti
ng Boar
d Mounte
d
to b
ack o
f Sig
n Cab
inet
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
05
01
05
04
01
06
2"
6"
2'-9"
3'-6"
2'-6"
2'-2"
2'-0"
4"
4'-6 "
5 1/4"
3"
4'-6"
5 1/4"
4"
1 1/2"
3/4"
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 1/2" capCentury Gothic Bold Italic, 1 1/2" cap
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 7/8"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Highway 2B
1'-6"
06
01
05
08
04
12'-0"
3'-6"
2'-0"
6'-3"
6"
6 3/4"
3"
3"
1 3/4"
4 1/2"
1 1/2"
2"1 1/2"
1"
5"
6"
9'-4"
1'-4"
1'-9"
4'-4" 4'-4"
8'-0"
3 1/
2"
1 3/
4"
1 1/
2"
2"
1'-0"
3'-0"
3"
01
04
06
05
7 1/2"
1 3/4"
4 1/2"
3 1/2"
2 1/2"1 1/4"
6'-6"
3 1/4"
1'-9"
5"
1'-4"
6"
8"
3"
1 3/4"2"
3 1/4"
5"
2'-0"
see enlargedlayout
4 3/4"
3/4"
3/4"
2"
3/4"3/4"
1"
2"
1/2"1/2"1/4"
4 3/4" 1"
4'-8"
1'-10"
1'-4"
1'-2"
6'-4"
3'-6"
1"
1"
30.00°
8" 3"
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"9"
7"
3"5"
2"
5"
7"
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
MOUNTING BRACKET1/4" thick plate steel tabs
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
EXPLODED VIEWSee Type 3 Exploded View Sheet
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
5"
DIRECT BURY POSTSFootings to be level with grade.Width and depth to meet or exceedlocal sign code requirements.Below grade post length to bedetermined by fabricator.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF MOUNTING POINTSMechanical spacers to supportcorrugated metal roof
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF CROSS MEMBERS2" x 2" Square steel tubingwelded to Canopy Supports.
ROOF CROSS MEMBERS2" x 2" Square steel tubing
welded to Canopy Supports.
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOF CAPStainless steel roof cap installedover top beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
3"7 1/4"
5 1/2"
2 1/2" 3 1/2"
2"
3 1/
2"
5 1/2"
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
POSTING BOARDExterior grade syntheticposting board and drip rail.
POSTING BOARDExterior grade 1/2" thickDark Grey synthetic postingboard. Inset 1" from theedge on all sides.
Back ViewSide View
DRIP RAILAluminum drip rail
mechanically fastenedto Sign Cabinet. Paintedto match Posting Board
9"
7"
1"2"
3"5"
1 7/8"
1 1/2"
2 1/8"
2 1/8"
ROOF CAPStainless steel metal roofcap fastened above corrugated roof
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanicalfasteners.
AccessInformationAvailable
Designated trail users only
See BEAM ASSEMBLY DETAIL on sheet 33" x 3" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
11
03.03.09 Design Intent
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6Trail Guide (primary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 4Access/Egress Information Sign
Client
The Town ofMammoth Lakes California
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
07
08
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 8Regulatory
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
3/4" = 1'-0" (on an 11 x 17 sheet)
2" x 2" structural steel "L" beams
2" x 2" square structural steel
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
06
07
07
08
09
01
02
3/8" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Frame Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6aTrail Guide (secondary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
03
04
05
06
07
08
08
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
GRAVITY LOCK3/8" thick plate aluminum withanodized finish. Latch to swingopen and closed positions.
LOCKING UNIT IN PLACEThrough holes to allow for pad lockat end of latch stop.
Latch stop
GRAVITY LOCKSee detail on this page
MESSAGE PANEL1/8" thick aluminum panel MESSAGE PANEL
1/8" thick aluminum panel
GUIDE FRAMEAluminum frame to slide freely along sign post.With welded Gravity Lock and Handle Supports.Circular holes cut to lighted assembly.
HANDLEAluminum round bar stock withpowder coated finish. Edges that mountto Guide Frame are cut flat. 3/16" Gusset panelswelded between Handle and Guide Frame tocreate Message panel mounting point
Round bar cut flat along this edge. Gravity Lock supports
Handle Gussets
Message Panelmounted to handleusing stainless steelmechanical hardware
ATTENTIONLatch must swing open freelyand stop at this open position.
Back View Side View (latch open) Side View (latch closed)
Back View Side View(open to locked onto rung)
Side View(closed to bypass rung)
hole
Holes
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
DO NOTENTER
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.Welded end cap to close post.
THREADED RODS1" diameter x 1 1/4" widethreaded aluminum rods.To join both Vertical Postswith exposed mechanicalfasteners (3/8" steel roundhex head screws.)
POSTS SUPPORTS2" x 2" structural steel withholes drilled to accept mountinghardware for threaded rods.Exposed corners are cut to45˚ angle.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
04
07
09
06
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Cop
yrig
ht ©
200
9 Je
ffry
Cor
bin
Des
ign,
Inc
.Pa
tent
Pen
ding
.
Copyright © 2009 Jeffry Corbin Design, Inc. Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
VERTICAL POSTS2" x 2" structural steel with holes
drilled to accept mountinghardware for threaded rods.
06
01
05
05
08
04
10'-0"
FONTSCentury Gothic Bold, 3" capClearview Hwy 2-B, 1 1/2" & 1/2" cap
06
6"
12" x 18"
18" x 24"
3"
Adj
usta
ble
heig
ht r
ange
Type
4 a
nd T
ype
6
2"
5 1/4"
12'-0"
1'-0"
3'-0"
1"
Adj
usta
ble
heig
ht r
ange
Type
8 s
tand
ard
regu
lato
ry s
igns
06
07
04
05
01
08
1"
1 1/
4"
2"
1"4"
1'-4"
4 1/2" 1"
1"
1"
4 1/2"
1"
2 1/4"
1"
3"
1'-1 5/8"
1 1/2"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
FONTSClearview Hwy 2-B
1 1/2"
1"3/4"
1 1/2"
1'-0"
2'-0"
1'-6"
1 5/8"
2 1/2"
1 3/4"
4'-0"
1"
1 1/
4"
2"
1" 1"
4"
1'-4"
2 1/4"
1"
1 1/2"
4'-0"
1 1/2"
2"
1 1/2"
1 1/4"1/2"
1 1/2"
3/4"1"
2"
1 1/2"
07
01
08
06
04
5"
3'-5"
2"
4'-0"
5"
1 1/
4"
1 1/2"
3/4"
1/2"1/2"
1/4"
Center vertically in brown band
Center type horizontally on sign panel
Center type horizontally on sign panel
Center arrow inbrown band
1"
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California..
12
03.03.09 Design Intent
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6Trail Guide (primary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 4Access/Egress Information Sign
Client
The Town ofMammoth Lakes California
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
07
08
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 8Regulatory
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
3/4" = 1'-0" (on an 11 x 17 sheet)
2" x 2" structural steel "L" beams
2" x 2" square structural steel
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
06
07
07
08
09
01
02
3/8" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Frame Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6aTrail Guide (secondary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
03
04
05
06
07
08
08
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
GRAVITY LOCK3/8" thick plate aluminum withanodized finish. Latch to swingopen and closed positions.
LOCKING UNIT IN PLACEThrough holes to allow for pad lockat end of latch stop.
Latch stop
GRAVITY LOCKSee detail on this page
MESSAGE PANEL1/8" thick aluminum panel MESSAGE PANEL
1/8" thick aluminum panel
GUIDE FRAMEAluminum frame to slide freely along sign post.With welded Gravity Lock and Handle Supports.Circular holes cut to lighted assembly.
HANDLEAluminum round bar stock withpowder coated finish. Edges that mountto Guide Frame are cut flat. 3/16" Gusset panelswelded between Handle and Guide Frame tocreate Message panel mounting point
Round bar cut flat along this edge. Gravity Lock supports
Handle Gussets
Message Panelmounted to handleusing stainless steelmechanical hardware
ATTENTIONLatch must swing open freelyand stop at this open position.
Back View Side View (latch open) Side View (latch closed)
Back View Side View(open to locked onto rung)
Side View(closed to bypass rung)
hole
Holes
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Am
phi
the
ate
r67.0
RESCUELOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
DO NOTENTER
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.Welded end cap to close post.
THREADED RODS1" diameter x 1 1/4" widethreaded aluminum rods.To join both Vertical Postswith exposed mechanicalfasteners (3/8" steel roundhex head screws.)
POSTS SUPPORTS2" x 2" structural steel withholes drilled to accept mountinghardware for threaded rods.Exposed corners are cut to45˚ angle.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
04
07
09
06
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Cop
yrig
ht ©
200
9 Je
ffry
Cor
bin
Des
ign,
Inc
.Pa
tent
Pen
ding
.
Copyright © 2009 Jeffry Corbin Design, Inc. Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
VERTICAL POSTS2" x 2" structural steel with holes
drilled to accept mountinghardware for threaded rods.
06
01
05
05
08
04
10'-0"
FONTSCentury Gothic Bold, 3" capClearview Hwy 2-B, 1 1/2" & 1/2" cap
06
6"
12" x 18"
18" x 24"
3"
Adj
usta
ble
heig
ht r
ange
Type
4 a
nd T
ype
6
2"
5 1/4"
12'-0"
1'-0"
3'-0"
1"
Adj
usta
ble
heig
ht r
ange
Type
8 s
tand
ard
regu
lato
ry s
igns
06
07
04
05
01
08
1"
1 1/
4"
2"
1"4"
1'-4"
4 1/2" 1"
1"
1"
4 1/2"
1"
2 1/4"
1"
3"
1'-1 5/8"
1 1/2"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
FONTSClearview Hwy 2-B
1 1/2"
1"3/4"
1 1/2"
1'-0"
2'-0"
1'-6"
1 5/8"
2 1/2"
1 3/4"
4'-0"
1"
1 1/
4"
2"
1" 1"
4"
1'-4"
2 1/4"
1"
1 1/2"
4'-0"
1 1/2"
2"
1 1/2"
1 1/4"1/2"
1 1/2"
3/4"1"
2"
1 1/2"
07
01
08
06
04
5"
3'-5"
2"
4'-0"
5"
1 1/
4"
1 1/2"
3/4"
1/2"1/2"
1/4"
Center vertically in brown band
Center type horizontally on sign panel
Center type horizontally on sign panel
Center arrow inbrown band
1"
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California..
13
03.03.09 Design Intent
3/4" = 1'-0" (on an 11 x 17 sheet)
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
3" x 3" steel beam construction 4" x 4" steel beam construction
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction3" x 3" steel beam canopy supports
4" x 4" steel beam construction
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 7Interpretive Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 3Park ID Marker
Client
The Town ofMammoth LakessCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 ElevationTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 2 Exploded ViewTrail Information Kiosk
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
Mammoth LakesWelcome Center
Open Daily 8:00am to 5:00pm
Information and MapsPermitsLodging informationBookstoreForest Service Business
Main PathTRAILHEAD
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 5bPedestrian Guide
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
01
02
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Sign signcabinet or equivalent
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"
9"
7"
3"5"
2" Welcome Ctr
Mammoth Lakes
Mammoth LakesSign System
RangerStation
Restrooms
Main Path
Tourism &Rec. Dept.
FONTSClearview Hwy 1-B, 2 1/2" capCentury Gothic Bold, 1 3/4" cap
AccessInformationAvailable
Designated trail users only
Rescue LocationUse this number to inform emergencypersonnel of your location
67.0
Inte
rpre
tive P
anel
TBD
Posti
ng Boar
d Mounte
d
to b
ack o
f Sig
n Cab
inet
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
05
01
05
04
01
06
2"
6"
2'-9"
3'-6"
2'-6"
2'-2"
2'-0"
4"
4'-6 "
5 1/4"
3"
4'-6"
5 1/4"
4"
1 1/2"
3/4"
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 1/2" capCentury Gothic Bold Italic, 1 1/2" cap
FONTSCentury Gothic Bold, 3" capCentury Gothic Regular, 1 7/8"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Highway 2B
1'-6"
06
01
05
08
04
12'-0"
3'-6"
2'-0"
6'-3"
6"
6 3/4"
3"
3"
1 3/4"
4 1/2"
1 1/2"
2"1 1/2"
1"
5"
6"
9'-4"
1'-4"
1'-9"
4'-4" 4'-4"
8'-0"
3 1/
2"
1 3/
4"
1 1/
2"
2"
1'-0"
3'-0"
3"
01
04
06
05
7 1/2"
1 3/4"
4 1/2"
3 1/2"
2 1/2"1 1/4"
6'-6"
3 1/4"
1'-9"
5"
1'-4"
6"
8"
3"
1 3/4"2"
3 1/4"
5"
2'-0"
see enlargedlayout
4 3/4"
3/4"
3/4"
2"
3/4"3/4"
1"
2"
1/2"1/2"1/4"
4 3/4" 1"
4'-8"
1'-10"
1'-4"
1'-2"
6'-4"
3'-6"
1"
1"
30.00°
8" 3"
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
4"9"
7"
3"5"
2"
5"
7"
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
DIRECT BURY POSTSFootings to be level with grade.
VERTICAL POSTStructural steel wide flangebeam with drilled holes to acceptmounting hardware for signcabinet. Welded brackets toaccept cross members.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
MOUNTING BRACKET1/4" thick plate steel tabs
LOWER CROSS MEMBERStructural steelwide flange beam
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
LOWER CROSS MEMBERStructural steelwide flange beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
EXPLODED VIEWSee Type 3 Exploded View Sheet
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
5"
DIRECT BURY POSTSFootings to be level with grade.Width and depth to meet or exceedlocal sign code requirements.Below grade post length to bedetermined by fabricator.
VERTICAL POSTStructural steel wide flangebeam with drilled holes toaccept mounting hardwarefor sign cabinet. Weldedbrackets to accept crossmembers.
MOUNTING BRACKET1/4" thick plate steel tabs
UPPER CROSS MEMBERStructural steel wideflange beam with customcut decorative end detail
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF MOUNTING POINTSMechanical spacers to supportcorrugated metal roof
ROOF SUPPORTS3" x 3" Structural steel wideflange beam with customcut decorative end detail
ROOF CROSS MEMBERS2" x 2" Square steel tubingwelded to Canopy Supports.
ROOF CROSS MEMBERS2" x 2" Square steel tubing
welded to Canopy Supports.
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOFBox beam corrugated T-304stainless steel metal roofingwith mill (dull) finish
STAINLESS STEEL ROOF CAPStainless steel roof cap installedover top beam
POST EXTENSIONStructural steel wide flangebeam with custom cutdecorative end detail
FABRICATOR TO PROVIDECOORDINATED SHOP DRAWINGSFOR ENGINEER/OWNER REVIEW
AND ACCEPTANCE.
3"7 1/4"
5 1/2"
2 1/2" 3 1/2"
2"
3 1/
2"
5 1/2"
SIGN CABINETNon-illuminated changeablealuminum panel sign body2" deep SignComp Signsign cabinet or equivalent
POSTING BOARDExterior grade syntheticposting board and drip rail.
POSTING BOARDExterior grade 1/2" thickDark Grey synthetic postingboard. Inset 1" from theedge on all sides.
Back ViewSide View
DRIP RAILAluminum drip rail
mechanically fastenedto Sign Cabinet. Paintedto match Posting Board
9"
7"
1"2"
3"5"
1 7/8"
1 1/2"
2 1/8"
2 1/8"
ROOF CAPStainless steel metal roofcap fastened above corrugated roof
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanicalfasteners.
AccessInformationAvailable
Designated trail users only
See BEAM ASSEMBLY DETAIL on sheet 33" x 3" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
See BEAM ASSEMBLY DETAIL on sheet 34" x 4" wide flange beam structural steel beams.
Steel nuts, washers and bolts. Bolts to notextend beyond nut by more than 1/2”.All bolt heads to be inside of beams.
14
03.03.09 Design Intent
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6Trail Guide (primary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 4Access/Egress Information Sign
Client
The Town ofMammoth Lakes California
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
07
08
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 8Regulatory
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
3/4" = 1'-0" (on an 11 x 17 sheet)
2" x 2" structural steel "L" beams
2" x 2" square structural steel
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
06
07
07
08
09
01
02
3/8" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Frame Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6aTrail Guide (secondary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
03
04
05
06
07
08
08
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
GRAVITY LOCK3/8" thick plate aluminum withanodized finish. Latch to swingopen and closed positions.
LOCKING UNIT IN PLACEThrough holes to allow for pad lockat end of latch stop.
Latch stop
GRAVITY LOCKSee detail on this page
MESSAGE PANEL1/8" thick aluminum panel MESSAGE PANEL
1/8" thick aluminum panel
GUIDE FRAMEAluminum frame to slide freely along sign post.With welded Gravity Lock and Handle Supports.Circular holes cut to lighted assembly.
HANDLEAluminum round bar stock withpowder coated finish. Edges that mountto Guide Frame are cut flat. 3/16" Gusset panelswelded between Handle and Guide Frame tocreate Message panel mounting point
Round bar cut flat along this edge. Gravity Lock supports
Handle Gussets
Message Panelmounted to handleusing stainless steelmechanical hardware
ATTENTIONLatch must swing open freelyand stop at this open position.
Back View Side View (latch open) Side View (latch closed)
Back View Side View(open to locked onto rung)
Side View(closed to bypass rung)
hole
Holes
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
DO NOTENTER
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.Welded end cap to close post.
THREADED RODS1" diameter x 1 1/4" widethreaded aluminum rods.To join both Vertical Postswith exposed mechanicalfasteners (3/8" steel roundhex head screws.)
POSTS SUPPORTS2" x 2" structural steel withholes drilled to accept mountinghardware for threaded rods.Exposed corners are cut to45˚ angle.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
04
07
09
06
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Cop
yrig
ht ©
200
9 Je
ffry
Cor
bin
Des
ign,
Inc
.Pa
tent
Pen
ding
.
Copyright © 2009 Jeffry Corbin Design, Inc. Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
VERTICAL POSTS2" x 2" structural steel with holes
drilled to accept mountinghardware for threaded rods.
06
01
05
05
08
04
10'-0"
FONTSCentury Gothic Bold, 3" capClearview Hwy 2-B, 1 1/2" & 1/2" cap
06
6"
12" x 18"
18" x 24"
3"
Adj
usta
ble
heig
ht r
ange
Type
4 a
nd T
ype
6
2"
5 1/4"
12'-0"
1'-0"
3'-0"
1"
Adj
usta
ble
heig
ht r
ange
Type
8 s
tand
ard
regu
lato
ry s
igns
06
07
04
05
01
08
1"
1 1/
4"
2"
1"4"
1'-4"
4 1/2" 1"
1"
1"
4 1/2"
1"
2 1/4"
1"
3"
1'-1 5/8"
1 1/2"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
FONTSClearview Hwy 2-B
1 1/2"
1"3/4"
1 1/2"
1'-0"
2'-0"
1'-6"
1 5/8"
2 1/2"
1 3/4"
4'-0"
1"
1 1/
4"
2"
1" 1"
4"
1'-4"
2 1/4"
1"
1 1/2"
4'-0"
1 1/2"
2"
1 1/2"
1 1/4"1/2"
1 1/2"
3/4"1"
2"
1 1/2"
07
01
08
06
04
5"
3'-5"
2"
4'-0"
5"
1 1/
4"
1 1/2"
3/4"
1/2"1/2"
1/4"
Center vertically in brown band
Center type horizontally on sign panel
Center type horizontally on sign panel
Center arrow inbrown band
1"
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California..
15
03.03.09 Design Intent
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6Trail Guide (primary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 4Access/Egress Information Sign
Client
The Town ofMammoth Lakes California
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
07
08
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 8Regulatory
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
3/4" = 1'-0" (on an 11 x 17 sheet)
2" x 2" structural steel "L" beams
2" x 2" square structural steel
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
06
07
07
08
09
01
02
3/8" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Frame Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6aTrail Guide (secondary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
03
04
05
06
07
08
08
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
GRAVITY LOCK3/8" thick plate aluminum withanodized finish. Latch to swingopen and closed positions.
LOCKING UNIT IN PLACEThrough holes to allow for pad lockat end of latch stop.
Latch stop
GRAVITY LOCKSee detail on this page
MESSAGE PANEL1/8" thick aluminum panel MESSAGE PANEL
1/8" thick aluminum panel
GUIDE FRAMEAluminum frame to slide freely along sign post.With welded Gravity Lock and Handle Supports.Circular holes cut to lighted assembly.
HANDLEAluminum round bar stock withpowder coated finish. Edges that mountto Guide Frame are cut flat. 3/16" Gusset panelswelded between Handle and Guide Frame tocreate Message panel mounting point
Round bar cut flat along this edge. Gravity Lock supports
Handle Gussets
Message Panelmounted to handleusing stainless steelmechanical hardware
ATTENTIONLatch must swing open freelyand stop at this open position.
Back View Side View (latch open) Side View (latch closed)
Back View Side View(open to locked onto rung)
Side View(closed to bypass rung)
hole
Holes
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
DO NOTENTER
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.Welded end cap to close post.
THREADED RODS1" diameter x 1 1/4" widethreaded aluminum rods.To join both Vertical Postswith exposed mechanicalfasteners (3/8" steel roundhex head screws.)
POSTS SUPPORTS2" x 2" structural steel withholes drilled to accept mountinghardware for threaded rods.Exposed corners are cut to45˚ angle.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
04
07
09
06
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Cop
yrig
ht ©
200
9 Je
ffry
Cor
bin
Des
ign,
Inc
.Pa
tent
Pen
ding
.
Copyright © 2009 Jeffry Corbin Design, Inc. Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
VERTICAL POSTS2" x 2" structural steel with holes
drilled to accept mountinghardware for threaded rods.
06
01
05
05
08
04
10'-0"
FONTSCentury Gothic Bold, 3" capClearview Hwy 2-B, 1 1/2" & 1/2" cap
06
6"
12" x 18"
18" x 24"
3"
Adj
usta
ble
heig
ht r
ange
Type
4 a
nd T
ype
6
2"
5 1/4"
12'-0"
1'-0"
3'-0"
1"
Adj
usta
ble
heig
ht r
ange
Type
8 s
tand
ard
regu
lato
ry s
igns
06
07
04
05
01
08
1"
1 1/
4"
2"
1"4"
1'-4"
4 1/2" 1"
1"
1"
4 1/2"
1"
2 1/4"
1"
3"
1'-1 5/8"
1 1/2"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
FONTSClearview Hwy 2-B
1 1/2"
1"3/4"
1 1/2"
1'-0"
2'-0"
1'-6"
1 5/8"
2 1/2"
1 3/4"
4'-0"
1"
1 1/
4"
2"
1" 1"
4"
1'-4"
2 1/4"
1"
1 1/2"
4'-0"
1 1/2"
2"
1 1/2"
1 1/4"1/2"
1 1/2"
3/4"1"
2"
1 1/2"
07
01
08
06
04
5"
3'-5"
2"
4'-0"
5"
1 1/
4"
1 1/2"
3/4"
1/2"1/2"
1/4"
Center vertically in brown band
Center type horizontally on sign panel
Center type horizontally on sign panel
Center arrow inbrown band
1"
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California..
16
03.03.09 Design Intent
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6Trail Guide (primary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 4Access/Egress Information Sign
Client
The Town ofMammoth Lakes California
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
03
04
05
06
07
08
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
07
08
09
01
02
1 1/2" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 8Regulatory
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
3/4" = 1'-0" (on an 11 x 17 sheet)
2" x 2" structural steel "L" beams
2" x 2" square structural steel
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Post Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Black
03
04
05
06
06
07
07
08
09
01
02
3/8" = 1'-0" (on an 11 x 17 sheet)
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
Frame Details forAdjustable HeightSign TypesSign Types 4, 6 and 8
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
03
04
05
06
07
08
01
02
3/4" = 1'-0" (on an 11 x 17 sheet)
1 1/2" = 1'-0"
Scale
Notes
Color Code
01.30.09 Design Intent
Sign Type
TYPE 6aTrail Guide (secondary)
Client
The Town ofMammoth LakesCalifornia
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Town of Mammoth Lakes
US Forest Service
Mammoth Mountain
White
Brown
Steel Finish
Red
Orange
Dark Gold
03
04
05
06
07
08
08
01
02
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
GRAVITY LOCK3/8" thick plate aluminum withanodized finish. Latch to swingopen and closed positions.
LOCKING UNIT IN PLACEThrough holes to allow for pad lockat end of latch stop.
Latch stop
GRAVITY LOCKSee detail on this page
MESSAGE PANEL1/8" thick aluminum panel MESSAGE PANEL
1/8" thick aluminum panel
GUIDE FRAMEAluminum frame to slide freely along sign post.With welded Gravity Lock and Handle Supports.Circular holes cut to lighted assembly.
HANDLEAluminum round bar stock withpowder coated finish. Edges that mountto Guide Frame are cut flat. 3/16" Gusset panelswelded between Handle and Guide Frame tocreate Message panel mounting point
Round bar cut flat along this edge. Gravity Lock supports
Handle Gussets
Message Panelmounted to handleusing stainless steelmechanical hardware
ATTENTIONLatch must swing open freelyand stop at this open position.
Back View Side View (latch open) Side View (latch closed)
Back View Side View(open to locked onto rung)
Side View(closed to bypass rung)
hole
Holes
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Am
phi
the
ate
r
67.0RESCUE
LOCATION
Designated trailusers only
67.1RESCUELOCATION
Ma
in P
ath
TR
AIL
HE
AD
DO NOTENTER
Ma
in P
ath
WelcomeCenter
RangerStation
Tourism &Rec. Dept.
Main Path
Shady Rest CrossCountry SkiTrails
LowerParking Lot
67.2RESCUELOCATION
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.
VERTICAL POSTS2" x 2" structural steel with holesdrilled to accept mountinghardware for threaded rods.Welded end cap to close post.
THREADED RODS1" diameter x 1 1/4" widethreaded aluminum rods.To join both Vertical Postswith exposed mechanicalfasteners (3/8" steel roundhex head screws.)
POSTS SUPPORTS2" x 2" structural steel withholes drilled to accept mountinghardware for threaded rods.Exposed corners are cut to45˚ angle.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSStandard Regulatory construction.Engineer grade reflective background withhigh performance grade opaque vinyl graphics
FINISH AND GRAPHICSMatthews acrylic polyurethane paintedbackground, edges and back. Surfacemasked and sprayed text and graphics.Satin clear coat to be applied overbackground, text and graphics.
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
04
07
09
06
GRAPHIC PANEL1/8" thick fiberglass panel withembedded ink-jet graphics.Printed at 600dpi usingexterior UV inhibiting inks.Manufacturer: Pannierwww.panniergraphics.comor approved alternate.Mounted with mechanical fasteners.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Copyright © 2009 Jeffry Corbin Design, Inc.Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
Cop
yrig
ht ©
200
9 Je
ffry
Cor
bin
Des
ign,
Inc
.Pa
tent
Pen
ding
.
Copyright © 2009 Jeffry Corbin Design, Inc. Patent Pending.
Copyright © 2009Jeffry Corbin Design, Inc.
Patent Pending.
VERTICAL POSTS2" x 2" structural steel with holes
drilled to accept mountinghardware for threaded rods.
06
01
05
05
08
04
10'-0"
FONTSCentury Gothic Bold, 3" capClearview Hwy 2-B, 1 1/2" & 1/2" cap
06
6"
12" x 18"
18" x 24"
3"
Adj
usta
ble
heig
ht r
ange
Type
4 a
nd T
ype
6
2"
5 1/4"
12'-0"
1'-0"
3'-0"
1"
Adj
usta
ble
heig
ht r
ange
Type
8 s
tand
ard
regu
lato
ry s
igns
06
07
04
05
01
08
1"
1 1/
4"
2"
1"4"
1'-4"
4 1/2" 1"
1"
1"
4 1/2"
1"
2 1/4"
1"
3"
1'-1 5/8"
1 1/2"
FONTSCentury Gothic BoldCentury Gothic RegularCentury Gothic Bold ItalicClearview Hwy 2-B
FONTSClearview Hwy 2-B
1 1/2"
1"3/4"
1 1/2"
1'-0"
2'-0"
1'-6"
1 5/8"
2 1/2"
1 3/4"
4'-0"
1"
1 1/
4"
2"
1" 1"
4"
1'-4"
2 1/4"
1"
1 1/2"
4'-0"
1 1/2"
2"
1 1/2"
1 1/4"1/2"
1 1/2"
3/4"1"
2"
1 1/2"
07
01
08
06
04
5"
3'-5"
2"
4'-0"
5"
1 1/
4"
1 1/2"
3/4"
1/2"1/2"
1/4"
Center vertically in brown band
Center type horizontally on sign panel
Center type horizontally on sign panel
Center arrow inbrown band
1"
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
POST & FRAME DETAILSPlease see "Post for Adjustable HeightSign Types" and "Frame for Adjustable Height Sign Types" pages at the end of this document.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California.
This drawing is design-intent only.Fabricator is responsible for engineering, fabrication and overall level of quality. Any changes in design, materials, fabrication method or other details must be approved by Corbin Design and the Town of Mammoth Lakes, California..
17
03.03.09 Design Intent
18
19
20