Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
MAKE DUST HISTORY
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
MOVE TOWARD OSHA COMPLIANCE WITH PRO+GUARD™
DUST SOLUTIONS
Move Towards OSHA Compliance with Bosch PRO+GUARD™ Dust Solutions
Visit boschtools.com/PROGUARD for more information.
• Largest selection of dust solutions• Speed Clean™ bits are code approved and meet OSHA standards • Engineered for maximum dust removal• Best-in-class dust extraction
*According to CPWR (http://www.silica-safe.org/know-the-hazard/take-action)
© Robert Bosch Tool Corporation.
PROTECT THE TOOLSYOU CAN’T REPLACE
MAKE DUSTHISTORY
3
TABLE OF CONTENTS
OSHA COMPLIANT DUST SOLUTIONS FOR CONCRETE DRILLING, DEMOLITION, GRINDING AND CUTTING
PRO+GUARD™ Dust Solutions 4‒5
Dangers of Silica Exposure 6
OSHA Silica Standard 7
Concrete Dust Solutions 9
Concrete Drilling & Anchoring 10–11
Concrete Chiseling & Demolition 12–13
Concrete Surface Grinding 14
Masonry Tuckpointing 15
Concrete Cutting 16–17
Dust Extractors, Filters and Extractor Attachments 18‒21
OSHA 1926.1153 Table 1 Silica Regulations for Power Tools 22
Bosch to Fastenal® SKU Conversion List 23
TAB
LE O
F C
ON
TEN
TS
No Dust Collection With PRO+GUARD™ Dust Collection
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
4
DU
ST C
OLL
ECTI
ON
MAKE DUST HISTORY The updated OSHA silica regulation requires employers to limit their employees’ exposure to respirable crystalline silica dust to 50 μg/m3 or lower, averaged over an eight-hour day.
OSHA REGULATIONS ARE COMING, WEʼLL HELP YOU GET READY!
With the largest product lineup in the industry, Bosch PRO+GUARD™ dust solutions will allow you to move towards compliance and increase your productivity.
LARGEST SELECTIONLargest selection of dust solutions by application
HIGHLY EFFECTIVEMost dust removal per application
BEST-IN-CLASS DUST EXTRACTORSConsistent suction power to reach compliance
5
CO
NC
RET
E
WEʼVE GOT YOUR BACK Bosch PRO+GUARD™ Protection System
Whether you are concerned about the health of your employees, your health, compliance or increasing productivity, Bosch has developed PRO+GUARD™ protection systems.
MAXIMIZE PERFORMANCEBosch dust collection systems can boost your overall productivity with proven products like our Speed Clean™ dust extraction drill bits. When using these bits to set adhesive anchors, you can reduce installation time by up to 50%.
GET COMPLIANTWhen using the correct setup and following manufacturer's instructions, Bosch dust collection systems help keep the air cleaner by using HEPA filters that capture more than 99.97% of dust particles 0.3 microns and larger.
PROTECT YOURSELF & OTHERSAccording to health experts, inhaling dust containing silica in some instances may cause silicosis, lung cancer, COPD and other debilitating diseases. Bosch dust collection systems can reduce airborne dust, helping to create a safer and healthier working environment.
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
6
DU
ST C
OLL
ECTI
ON
BREATHE EASIER The Center for Construction Research and Training explains the danger of silica exposure.
WHAT IS CRYSTALLINE SILICA?Silica, often referred to as quartz, is a very common mineral. It is found in many materials common on construction sites, including soil, sand, concrete, masonry, rock, granite, and landscaping materials. The dust created by cutting, grinding, drilling or otherwise disturbing these materials can contain crystalline silica particles. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards. Each exposure to silica adds to the lung damage.
WHAT IS SILICOSIS?Silicosis is a disabling, irreversible, and sometimes fatal lung disease. When a worker inhales crystalline silica, the lungs react by developing hard nodules and scarring around the trapped silica particles. If the nodules become too large, breathing becomes difficult and death can result. There is no cure for this disease, but it is 100% preventable.
ARE YOU AT RISK?If you do the following to concrete, mortar, sand, rock, masonry and some paints:
f f Cut or sawf f Grindf f Drill
f f Jackhammerf f Crush or demolishf f Abrasive or sand blast
Then the answer is YES!
WHY IT’S DEADLY Inhaling crystalline silica can lead to serious, sometimes fatal illnesses including silicosis, lung cancer, tuberculosis (in those with silicosis), and chronic obstructive pulmonary disease (COPD). In addition, silica exposure has been linked to other illnesses including renal disease and other cancers. In 1996, the World Health Organization — International Agency on Cancer Research (IARC) identified crystalline silica as a “known human carcinogen” (they reaffirmed this position in 2009). The American Thoracic Society and the American College of Occupational and Environmental Medicine have also recognized the adverse health effects of exposure to crystalline silica, including lung cancer.
FOR MORE INFORMATION REGARDING SILICA EXPOSURE OR OSHA RULINGS, PLEASE VISIT CPWR’S WEBSITE SILICA-SAFE.ORG
DANGERS OF SILICA EXPOSURE
7
OSHA SILICA STANDARD
CO
NC
RET
E
PROTECT YOURSELF & YOUR EMPLOYEESThe Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in Americaʼs workers by limiting their exposure to respirable crystalline silica.
ENSURE JOBSITE COMPLIANCEAccording to OSHAʼs website, the good news is that silicosis is 100% preventable! While using power tools with a dust attachment/accessory and dust extractors with the right filter, exposure to silica can be drastically reduced.
KEY PROVISIONSf f Reduces the permissible limit (PEL) to 50 μg/m3 (micrograms of silica per cubic meter of air), averaged over an eight-hour day.
f f Requires employers to use: – Engineering controls (such as water or ventilation) to limit worker exposure to respirable
silica dust to the PEL – Provide respirators when engineering controls cannot adequately limit exposure – Limit worker access to high exposure areas – Develop a written exposure control plan – Train workers on silica risks and how to limit exposures – Provide medical exams to monitor highly exposed workers and gives them information
about their lung healthf f Establish and implement a written exposure control plan to identify tasks that involve exposure and methods used to protect workers, including procedures to restrict access to work areas where high exposures may occur. Also, employers need to designate a competent person to implement the written exposure control plan.
f f Provides flexibility to help employers — especially small businesses — protect workers from silica exposure.
The new standard went into effect on June 23, 2016, and employers are required to comply with all obligations of the standard. OSHA enforcement dates differ by state and can be referenced by visiting https://www.osha.gov/dcsp/osp/index.html. If your state does not have their own state plan, OSHA federal silica regulations will apply.
CONCRETE DUST SOLUTIONS
CHOOSING THE RIGHT SYSTEM
9
CONCRETE DUST SOLUTIONS
APF 10 shown3M™ Rugged Comfort™
Half Face Respirator 6500 Series
CO
NC
RET
E
In order to move toward compliancy and protection, it is critical that every component in the system is designed to effectively remove dust. Outside of respiration, Bosch produces effective dust collection solutions to help you.
TOOL Dust collection systems are available for Bosch grinders, hammers and hammer drills, routers, jig saws, circular saws, miter saws, table saws, sanders and planers.
RESPIRATION Respirators protect you by filtering contaminants the user breathes. If needed for the application you are performing, respirators of this type include particulate respirators, which filter out airborne particles, and air-purifying respirators with cartridges/canisters which filter out chemicals and gases.
CONNECTIONSBosch dust collection connections offer a secure fit from tool to vacuum through a variety of hoses and adapters.
ATTACHMENTBosch dust collection attachments are custom engineered to provide maximum performance while preserving the full functionality of the tool.
DUST EXTRACTORSUse a professional dust extractor. Bosch dust extractors are rated as high as 150 CFM (cubic feet per minute), with some offering features such as HEPA filtration and automatic filter cleaning.
1. Choose the tool that best fits your needs
2. Identify the correct attachment that fits your tool
3. Choose a HEPA ready dust extractor with the highest CFM and meets EPA guidelines
4. Determine the respirator for your application (refer to the OSHA Table 1)*
For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica
*OSHA Rule 1926.1153 Table 1
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
10
CO
NC
RET
E D
RIL
LIN
G &
AN
CH
OR
ING
Find Your Tool Attachment or Accessory Filter & Dust Extractor Respiration OSHA Silica
Compliant◊
Hammer Drill
HDC200
VAC090A*, VAC090AH*, VAC140A*, VAC140AH*
None
Yes
1191VSR, HD18-2, HD19-2, HD21-2
18V HDS181A, HDS183, HDH181, HDH183
SDS-plus® Hammers
Anchoring Applications
Speed Clean™ SDS-plus®: HCD2074, HCD2084, HCD2094, DXS2104, DXS2114, DXS2124, DXSplus
Yes3/4" ‒ 1-1/8" Bulldog™
11253VSR, 11255VSR, GBH2-26, RH228VC, GBH2-28L, RH328VC, RH328VCQ
Universal Attachment
HDC200
18V RHH181, GBH18V-20, GBH18V-26**
36V 11536VSR, 11536-C, RH328VC-36
1-1/4" RH432VCQ
All the above SDS-plus® hammers except RH432VCQ
SDS-plus® only
HDC100
SDS-max® & Spline Hammers
11264EVS, 11265EVS, 11263EVS, 11245EVS, RH540M, RH850VC, RH540S, RH745, RH1255VC
Anchoring Applications
Speed Clean™ SDS-max®: DXS5034, DXS5048, DXS5044, DXS5054, DXS5062, DXS5082
Yes
Universal Dust Extraction
HDC200, HDC250
OR
OR
OR
CHOOSING THE RIGHT SYSTEM
BASED ON OSHA SILICA TABLE 1 — DRY DRILLING WITH HANDHELD AND STAND-MOUNTED DRILLS (Including Impact and Rotary Hammer Drills)
DUST SOLUTIONS f f Largest range of OSHA Code approved drilling solutions available
f f Largest drilling selectionf f Most dust removal per application
*Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag **When used with the GDE18V-16 a dust extractor is not needed ◊ See page 21
CONCRETE DRILLING & ANCHORING
▶ See page 23 for Bosch to Fastenal® SKU conversion list
11
CO
NC
RET
E D
RIL
LIN
G &
AN
CH
OR
ING
Item # Description
HDC200 Optimized for 1/4"–1-3/8" diameter. Maximum hole diameter is 2-5/8"*
HDC250 Optimized for 2-1/4"–5" diameter. Maximum hole diameter is 6"*
Item # Diameter Usable Length Overall Length Qty.HCD2074† 7/16" 7-1/2" 13" 1
HCD2084† 1/2" 7-1/2" 13" 1
HCD2094† 9/16" 10" 15" 1
DXS2104 5/8" 10" 15" 1
DXS2114 11/16" 12-1/2" 18" 1
DXS2124 3/4" 12-1/2" 18" 1
Item # Description
DXSPLUSRubber adapter connecting SDS-plus® Speed Clean™ dust extraction bits to standard 35mm diameter vacuum hose
Item # Description
DXSMAXRubber adapter connecting SDS-max® Speed Clean™ dust extraction bits to standard 35mm diameter vacuum hose
Item # Diameter Usable Length Overall Length Qty.DXS5034 3/4" 12-1/2" 21" 1
DXS5048 13/16" 15" 25" 1
DXS5044 7/8" 15" 25" 1
DXS5054 1" 17-1/2" 27" 1
DXS5062 1-1/8" 20" 29" 1
DXS5082 1-3/8" 25" 34" 1
Item # DescriptionHDC100 SDS-plus® depth control dust extraction unit
Item # DescriptionGDE18V-16 18V HEPA dust collector attachmentDF18V-16 Replacement HEPA Filter
*Brush ring needs to be removed
HAMMER DRILLING DUST EXTRACTION ATTACHMENTSf f Dust extraction attachments for drilling holes in concrete and masonryf f Can be used with a wide variety of drill bit diameters and bit lengthsf f For use with Bosch SDS-max® or SDS-plus® combination/rotary hammerf f Includes adapter VAC020
UNIVERSAL DUST EXTRACTION ATTACHMENTS
SDS-plus® SPEED CLEAN™ DUST EXTRACTION DRILL BITS*
SDS-plus® SPEED CLEAN™ ADAPTER
*All come with DXSPLUS adapter *All come with DXSMAX adapter
SDS-max® SPEED CLEAN™ ADAPTER
SDS-max® SPEED CLEAN™ DUST EXTRACTION DRILL BITS*
18V HEPA DUST COLLECTOR ATTACHMENT
f f For use with GBH18V-26 18V Bulldog™ Rotary Hammer and provides excellent dust collection through an Auto-Power-On feature. When drilling, the suction automatically turns on and 2 seconds of overrun after releasing hammer trigger
f f Removable Dust Container with HEPA filter
f f Max. Drill Bit Length – 6.5"; Max. Drilling Depth – 3.9"
f f Includes (2) end nozzles
DUST EXTRACTION ATTACHMENTf f Attaches to tool and vacuum cleaner hose to provide excellent dust collection when drilling in dust-sensitive areas, such as computer rooms and medical facilities
f f For use with bits up to 3/4" in diameter for extracting fine dustf f Built-in depth gaugef f For use with most Bosch SDS-plus® rotary hammers
f f Compatible with: - Bulldog™: 11253VSR, 11255VSR, RH226, RH228VC, GBH2-28L, RH328VC, RH328VCQ - 18V: RH181, GBH18V-20, GBH18V-26 - 36V: 11536VSR, 11536-C, RH328VC-36
SDS-plus® ATTACHMENT AND ADAPTER
▶ See page 23 for Bosch to Fastenal® SKU conversion list
HDC250HDC200
SPEED CLEAN™ DUST EXTRACTION BITS
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
12
CO
NC
RET
E C
HIS
ELIN
G &
DEM
OLI
TIO
N
Find Your Tool Attachment or Accessory Filter & Dust Extractor Respiration OSHA Silica
Compliant◊
SDS-max and Spline Hammers(Chisel Mode Only)
VAC090A**, VAC090AH**, VAC140A**, VAC140AH**
• Needed when used indoors
• Needed when used outdoors >4 hours/shift
APF 10*(N95)
or
RR 6500*(P95)
Yes
11264EVS, 11265EVS, 11263EVS, 11245EVS, RH540M, RH850VC, RH540S, RH745, RH1255VC
HDC300
Demolition Hammers
Yes
11316EVS, 11321EVS, DH507, DH712VC, DH1020VC
HDC300
Demo/Breaker Hammers
Yes
BH2770VC, BH2760VC, 11335K, DH1020VC
HDC400
CONCRETE CHISELING & DEMOLITION
CHOOSING THE RIGHT SYSTEM
*3M™ Particulate Respirator 8210V & 3M™ Rugged Comfort™ Half Face Respirator 6500 Series shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21
BASED ON OSHA SILICA TABLE 1 — DRY CHISELING/ DEMOLITION WITH JACKHAMMERS AND HANDHELD POWERED CHIPPING TOOLS
DUST SOLUTIONS f f Largest range of chipping and demolition dust solutions available
f f Most dust removal per application
f f Best-in-class dust extraction
▶ See page 23 for Bosch to Fastenal® SKU conversion list
13
CO
NC
RET
E C
HIS
ELIN
G &
DEM
OLI
TIO
N
Item # Description
HDC400 Hammer dust collection attachment for demolition applications
Item # IncludesHDC300 Extension tube and (3) adapter pieces
CONCRETE CHISELING & DEMOLITION UNIVERSAL DUST EXTRACTION ATTACHMENTSDEMO/BREAKER HAMMER DUST EXTRACTION ATTACHMENT
CHISELING DUST EXTRACTION ATTACHMENT
f f Dust extraction attachment for chiseling into concrete/masonry. For best results, keep the attachment within 3" of the bit tip
f f For use with Bosch SDS-max® or spline chisels and hammersf f Toolless Installation — Installs easily and quickly without additional tools
f f Accommodates a variety of chisel lengths; easily change out chisels without removing the attachment
▶ See page 23 for Bosch to Fastenal® SKU conversion list
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
14
CO
NC
RET
E SU
RFA
CE
GR
IND
ING
Find Your Tool Attachment or Accessory
Filter & Dust Extractor Respiration OSHA Silica
Compliant◊
Concrete Surfacing
Not Required
VAC090A***, VAC090AH***, VAC140A***, VAC140AH***
• Needed when used indoors
• Needed when used outdoors >4 hours/shift
APF 10*(N95)
or
RR 6500*(P95)
Yes
CSG15, 1773A
4-1/2"–5" Grinders
Yes1821, 1821D, AG40-Series, AG50-Series, GWS10-45, GWS10-45P(D), GWS13-50, GWS13-50P(D), GWS13-50VS, GWS13-50VSP
Surfacing: 18SG-5E
18V GWS18V-45CP, GWS18V45C
7" Grinders
Use dust extractor with 175+ CFM.
Yes
1853-6, 1853-5, 1772-6, 1873-8(D), 1974-8, 1974-8D
Surfacing: 18SG-7
9" Grinders
1994-6**, 1994-6D**, 1893-6**, 1894-6**
Yes
Surfacing: 18SG-7
CONCRETE SURFACE GRINDING
BASED ON OSHA SILICA TABLE 1 — HANDHELD GRINDERS FOR USES OTHER THAN MORTAR REMOVAL (I.E., CONCRETE SURFACING)
CHOOSING THE RIGHT SYSTEM
DUST SOLUTIONS f f Largest range of surface grinding dust solutions available
f f Most dust and material removal
f f Best-in-class dust extraction
*3M™ Particulate Respirator 8210V & 3M™ Rugged Comfort™ Half Face Respirator 6500 Series shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **9" grinders can only use a 7" disc and attachment ***Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21
▶ See page 23 for Bosch to Fastenal® SKU conversion list
15
MAS
ON
RY
TUC
KPO
INTI
NG
Find Your Tool Attachment or Accessory
Filter & Dust Extractor Respiration OSHA Silica
Compliant◊
Tuckpointer
Not Required
VAC090A**, VAC090AH**, VAC140A**, VAC140AH**
• ≤4 hours/shift
RR 6500*(P95)
• >4 hours/shift
APF 25*
Yes
1775E, AG50-10TG
4-1/2"–5" Grinders
Yes
1821, 1821D, AG40-Series, AG50-Series, GWS10-45, GWS10-45P(D), GWS13-50, GWS13-50P(D), GWS13-50VS, GWS13-50VSP
Cutting: 18DC-5E or GA50DC
18V GWS18V-45CP, GWS18V45C
6" Grinders
Yes
1806E, 1812PSD, AG60-125, AG60-125PD, GWS13-60(PD)
18DC-6E
MASONRY TUCKPOINTING
*APF 10 – 3M™ Rugged Comfort™ Half Face Respirator 6500 Series and the APF25 – 3M™ Versaflo™ PAPR Respiratory System with Hardhat Assembly M-307 shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21
CHOOSING THE RIGHT SYSTEM
BASED ON OSHA SILICA TABLE 1 — HANDHELD GRINDERS FOR MORTAR REMOVAL (I.E., TUCKPOINTING)
DUST SOLUTIONS f f Largest range of tuckpointing solutions available
f f Most dust and material removal
f f Best-in-class dust extraction
▶ See page 23 for Bosch to Fastenal® SKU conversion list
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
16
CO
NC
RET
E C
UTT
ING
Find Your Tool Attachment or Accessory
Filter & Dust Extractor Respiration OSHA Silica
Compliant◊
4-1/2"–5" Grinders
1821, 1821D, AG40-Series, AG50-Series, GWS10-45, GWS10-45P(D), GWS13-50,w GWS13-50P(D), GWS13-50VS, GWS13-50VSP, GWS18V-45CP, GWS18V45C
Cutting: 18DC-5E or GA50DC
VAC090A**, VAC090AH**, VAC140A**, VAC140AH**
• Needed when used indoors
• Needed when used outdoors >4 hours/shift
APF 10*(N95)
or
RR 6500*(P95)
Yes
6" Grinders
1806E, 1812PSD, AG60-125, AG60-125PD, GWS13-60(PD)
Cutting: 18DC-6E
Yes
7" Grinders
1853-6, 1853-5, 1772-6, 1873-8(D)Cutting: 19DC-7
Use dust extractor with 175+ CFM Yes
9" Grinders
Use dust extractor with 225+ CFM Yes
1893-6, 1894-6 Cutting: 19DC-9
CHOOSING THE RIGHT SYSTEM
BASED ON OSHA SILICA TABLE 1 — HANDHELD GRINDERS FOR USES OTHER THAN MORTAR REMOVAL (I.E., CONCRETE CUTTING)
*3M™ Particulate Respirator 8210V & 3M™ Rugged Comfort™ Half Face Respirator 6500 Series shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21
CONCRETE CUTTING
DUST SOLUTIONS f f Largest range of dry concrete cutting solutions available
f f Most dust and material removal per application
f f Best-in-class dust extraction
▶ See page 23 for Bosch to Fastenal® SKU conversion list
17
CO
NC
RET
E C
UTT
ING
Item # Description
18DC-5E5" dust collection attachment compatible with GWS series, AG series and 1800 series 4-1/2" and 5" small angle grinders
18DC-6E6" dust collection attachment compatible with GWS series, AG series and 1800 series 6" small angle grinders
GA50DC 5" guard compatible with all GWS series, AG series and 1800 series 5" small angle grinders
Item # Description19DC-7 7" attachment19DC-9 9" attachment1605510215* 12" attachment
Item # Description
18SG-5E5" Shroud
5" concrete surfacing attachment for use with all GWS series, AG series and 1800 series 4-1/2" and 5" small angle grinders
Item # Description
18SG-77" Shroud
7" concrete surfacing attachment for use with 1853-5, 1853-6, 1873-6, 1873-8, 1873-8D, 1893-6 and 1893-6D (only with 7" wheel), 1994-6 and 1994-6D (only with 7" wheel)
Item # DescriptionTG500 5" tuckpointing attachment ― Fits 1775E only
TG5025" dust collection attachment compatible with GWS series, AG series and 1800 series 4-1/2" and 5" tuckpoint attachment
ATTACHMENTS CUTTING/DUST COLLECTION ATTACHMENTS
Type 1A (ISO 41) with Foot
GA50DC Type 1A (ISO41) with Foot
*For use with models 1364 and 1364K only
SURFACING/DUST COLLECTION ATTACHMENTS
TUCKPOINTING ATTACHMENT
▶ See page 23 for Bosch to Fastenal® SKU conversion list
No Dust Collection
With PRO+GUARD™ Dust Collection
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
18
DU
ST C
OLL
ECTI
ON
DUST EXTRACTORS
AUTOMATIC FILTER CLEANING DUST EXTRACTOR
WET*/DRY VAC SERIES
EFFECTIVE DUST EXTRACTION150 CFM
HOSE AND CORD STORAGE
f f Secure vacuum hose wrap
f f Power cord hook
ROBUST WHEELSf f Jobsite tested rear wheelsf f Front caster with brake
POWER TOOL ACTIVATION
EASY-TO-CHANGE FLAT FILTERS
POWER BROKERFor allocating power between vacuum and connected power tool; also allows suction control for specialty applications
AUTOMATIC FILTER CLEANING
ON/OFF BUTTON
INDICATOR LIGHTf f No Light = Offf f Green = On
AUTOMATIC FILTER CLEANING (AFC)Every 15 seconds the flat pleated filter is cleaned through a reversed airflow
▶ See page 23 for Bosch to Fastenal® SKU conversion list*Water level sensor for automatic shut off. Drain / Hose (VAC140A, VAC140AH). Do not use HEPA filter when using wet vacuum setting.
19
CO
NC
RET
E
SpecificationsRating 120VFrequency 60 HzCanister Volume (gross) 9.25Air Flow 150 CFM (70 ltr./sec.)Static Water Lift 97"No. of Filter Cartridges 1Sound Pressure Level 71 dbHose Length 10 ft. Hose Port Inside Diameter 2-1/4"Cord Length 16 ft.Weight 28.0 lbs.
SpecificationsRating 120VFrequency 60 HzCanister Volume (gross) 14.5Air Flow 150 CFM (70 ltr./sec.)Static Water Lift 97"No. of Filter Cartridges 1Sound Pressure Level 71 dbHose Length 10 ft. Hose Port Inside Diameter 2-1/4"Cord Length 16 ft.Weight 38.0 lbs.
f f Automatic Filter Cleaning — Cleans filter every 15 seconds to maintain maximum suction power
f f Power Tool Activation — Allows power tool switch to turn vacuum on and off
f f Power Broker™ Dial — For allocating power between vacuum and connected power tool; also allows suction control for specialty applications
f f Rugged Wheels and Locking Caster — Built to withstand the demands of a jobsite
INCLUDES Fleece Filter Bag VB090FAnti-Static Bend Nozzle VX10010 ft. Hose VH1035Power Tool Adapter Nozzle VX120HEPA Filter
9-GALLON DUST EXTRACTOR WITH AUTO FILTER CLEANING/HEPA FILTER/FLEECE FILTER BAGVAC090AH
f f Automatic Filter Cleaning — Cleans filter every 15 seconds to maintain maximum suction power
f f Power Tool Activation — Allows power tool switch to turn vacuum on and off
f f Power Broker™ Dial — For allocating power between vacuum and connected power tool; also allows suction control for specialty applications
f f Metal Frame, Rubber Wheels and Locking Caster — Built to withstand the demands of a jobsite
INCLUDESFleece Filter Bag VB140FAnti-Static Bend Nozzle VX10010 ft. Hose VH1035Power Tool Adapter Nozzle VX120HEPA Filter
14-GALLON DUST EXTRACTOR WITH AUTO FILTER CLEANING/HEPA FILTER/FLEECE FILTER BAGVAC140AH
Same features and specifications as VAC090AH above except:
Cellulose Flat Filter VF100
* HEPA Filter sold separately.
9-GALLON DUST EXTRACTOR WITH AUTO FILTER CLEANING*VAC090A
Same features and specifications as VAC140AH above except:
Cellulose Flat Filter VF100
* HEPA Filter sold separately.
14-GALLON DUST EXTRACTOR WITH AUTO FILTER CLEANING*VAC140A
▶ See page 23 for Bosch to Fastenal® SKU conversion list
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
20
DU
ST C
OLL
ECTI
ON
Item # Description QuantityVB090 Paper filter bag — 9 gal. 5VB140 Paper filter bag — 14 gal. 5VB090F Fleece filter bag — 9 gal. 5VB090F-30 Fleece filter bag — 9 gal. 30VB140F Fleece filter bag — 14 gal. 5VB140F-03 Fleece filter bag — 14 gal. 30VB090S Wet filter bag — 9–14 gal. 5VB000P Disposable plastic bag — 9–14 gal. 10
Item # DescriptionVH1635 16 ft., 35mm hoseVH1635A Anti-static 16 ft., 35mm hoseVH1622A Anti-static 16 ft., 22mm hoseVH1035 10 ft., 35mm hoseVH1022 10 ft., 22mm hose
Item # DescriptionVX100 Bend, anti-static
Item # DescriptionVX110 Three-piece chrome extension tube (3 ft. total length)
Item # Description
VX120 Connects VH hoses to tools that have ports for 35mm, 22mm or 19mm hoses. Included with all VH hoses
Item # # of Pieces Includes
VX130 3 Floor nozzle set with two inserts (bristles and squeegee)
Item # DescriptionVF100 Flat paper (cellulose) filterVF110 Flat polyester filterVF120H Flat HEPA filterVF130H Extended life, flat HEPA filter
DF18V-16 Replacement HEPA filter for GDE18V-16 dust collection attachment (see page 11)
VB140 VB140F
VB000P
FILTERSf f Each fits VAC090A, VAC090AH, VAC090S, VAC140A, VAC140AH and VAC140S dust extractors, excluding DF18V-16
FILTER BAGSf f Each fits VAC090A, VAC090AH, VAC090S, VAC140A, VAC140AH and VAC140S dust extractors
f f A fleece filter bag (VB090F, VB090F-30, VB140F and VB140F-30) is recommended when using a HEPA filter
HOSESf f Each fits VAC090A, VAC090S, VAC140A and VAC140S dust extractors
f f Not compatible with other dust extractorsf f These hoses connect many Bosch power tools and dust extraction attachments to Bosch VAC series dust extractors
f f VX120 power tool adapter is includedf f Anti-static hoses help prevent static shock and cling
OTHERf f Fits VH series hosesf f Fits VX100 extension tube set
VH1635 VH1022
EXTENSION TUBE SETf f Fits VX100 Bend
ADAPTER
THREE-PIECE VACUUM FLOOR NOZZLE SET
f f Fits VX110 extension tube set
ATTACHMENTS AND ACCESSORIES FOR VAC SERIES
VF120H DF18V-16VF130H
VB090F
▶ See page 23 for Bosch to Fastenal® SKU conversion list
21
CO
NC
RET
E
Item # Description
VAC002Connects 1-1/4" and 1-1/2" hoses to some tools and attachments that have ports for 35mm, 22mm or 19mm hoses
Item # Description
VAC004 Connects 35mm hoses to tools that have ports for 2-1/2" hoses
Item # Description
VAC020 Connects 2-1/2" hoses to tools that have ports for 35mm hoses
Item # Description
2605702022 Connects 2-1/2" hoses to certain miter saws, planers and routers
Item # DescriptionVAC005 35mm, 16.4 ft. swivels at both ends of hose
Item # Description
VAC024Connects 1-1/4" and 1-1/2" hoses to tools and attachments that have parts for 35mm, 22mm or 19mm hoses
VACUUM HOSE ADAPTERS
FRICTION-FIT VACUUM HOSEf f Connect many Bosch power tools and dust extraction hood attachments to vacuum cleaners that have openings for standard 2-1/4" hoses
f f Standard 2-1/4" friction fit
UNIVERSAL VACUUM HOSES AND HOSE ADAPTERS
◊ All information cited was prepared by Robert Bosch Tool Corporation on December 1, 2016, which is to serve as a basic summary helping users generally understand the OSHA Respirable Crystalline Silica Rule for the construction industry. This is not an official, legal, safety-related or comprehensive interpretation of the rule; you should always rely on your own review and evaluation of the applicable rules and regulations and understand that it is the individual’s and/or employer’s obligation to comply with such rules. Also, there may be additional OSHA standards and OSHA-approved state programs that apply. When using the equipment shown in this guide as you strive to meet your required compliances, always use the tools in accordance with the ownerʼs manual and OSHA regulations. For official information, please go to https://www.osha.gov/silica/ and for the complete rule (including Table 1), please see https://www.osha.gov/silica/SilicaConstructionRegText.pdf.
SILICA & OSHA REFERENCEShttps://www.osha.gov/dte/library/silicosis/si_con.htmlhttp://www.silica-safe.orghttps://www.osha.gov/silica/index.htmlhttps://www.osha.gov/silica/SilicaConstructionRegText.pdfhttps://www.osha.gov/SLTC/respiratoryprotection/index.htmlhttps://www.osha.gov/SLTC/wooddust/recognition.html
▶ See page 23 for Bosch to Fastenal® SKU conversion list
REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING
BOSCHTOOLS.COM 877-BOSCH-99
22
DU
ST C
OLL
ECTI
ON
Equipment/Task Engineering and Work Practice Control Methods
Required Respiratory Protection and Minimum Assigned Protection Factor (APF)≤ 4 hours/shift > 4 hours/shift
Handheld and Stand-Mounted Drills (including impact and rotary hammer drills)
Use drill equipped with commercially available shroud or cowling with dust collection system. Operate and maintain tool in accordance with manufacturer's instructions to minimize dust emissions. Dust collector must provide the air flow recommended by the tool manufacturer, or greater, and have a filter with 99% or greater efficiency and a filter-cleaning mechanism. Use a HEPA-filtered vacuum when cleaning holes.
None None
Jackhammers and Handheld Powered Chipping Tools
Use tool equipped with commercially available shroud and dust collection system. Operate and maintain tool in accordance with manufacturer's instructions to minimize dust emissions. Dust collector must provide the air flow recommended by the tool manufacturer, or greater, and have a filter with 99% or greater efficiency and a filter-cleaning mechanism.− When used outdoors. None APF 10
− When used indoors or in an enclosed area. APF 10 APF 10Handheld Power Saws for Cutting Fibercement Board (with blade diameter of 8 inches or less)
For tasks performed outdoors only: Use saw equipped with commercially available dust collection system. Operate and maintain tool in accordance with manufacturer's instructions to minimize dust emissions. Dust collector must provide the air flow recommended by the tool manufacturer, or greater, and have a filter with 99% or greater efficiency.
None None
Handheld Grinders for Mortar Removal (i.e., tuckpointing)
Use grinder equipped with commercially available shroud and dust collection system. Operate and maintain tool in accordance with manufacturer's instructions to minimize dust emissions. Dust collector must provide 25 cubic feet per minute (cfm) or greater of airflow per inch of wheel diameter and have a filter with 99% or greater efficiency and a cyclonic pre-separator or filter-cleaning mechanism.
APF 10 APF 25
Handheld Grinders for Uses Other than Mortar Removal
Use grinder equipped with commercially available shroud and dust collection system. Operate and maintain tool in accordance with manufacturer's instructions to minimize dust emissions. Dust collector must provide 25 cubic feet per minute (cfm) or greater of airflow per inch of wheel diameter and have a filter with 99% or greater efficiency and a cyclonic pre-separator or filter-cleaning mechanism.− When used outdoors. None None
− When used indoors or in an enclosed area. None APF 10
OSHA 1926.1153 TABLE 1 SILICA REGULATIONS FOR POWER TOOLS
TABLE 1 — SPECIFIED EXPOSURE CONTROL METHODS WHEN WORKING WITH MATERIALS CONTAINING CRYSTALLINE SILICA
▶ See page 23 for Bosch to Fastenal® SKU conversion list
23
CO
NC
RET
E
BOSCH TO FASTENAL® SKU CONVERSION LIST
Bosch # Fastenal # Description
11250VSRD 0223144 3/4" SDS-plus® Rotary Hammer, Pistol Grip w/ Dust Collection
11255VSR 0212000 1" SDS-plus® Rotary Hammer, "D" Handle "Bulldog Xtreme™" + 4-1/2" Angle Grinder
11255VSR-GWS8 2126877 1" SDS-plus® Rotary Hammer, "D" Handle "Bulldog Xtreme™"
11264EVS 0223140 1-5/8" SDS-max® Combination Hammer
11265EVS 0253640 1-5/8" Spline Combination Hammer
11316EVS 0236396 SDS-max® Demolition Hammer
11321EVS 0253641 SDS-max® Demolition Hammer w/ Vibration Control
11335K 0212013 1-1/8" Breaker Hammer w/ Vibration Control
1375A 0201018 4-1/2” Angle Grinder - 6 Amp w/ Lock-on Slide SwitchDF18V-16 TBD GDE18V-16 HEPA Replacement Filter
1821D 0212041 5” Angle Grinder - 9.5 Amp w/ No Lock-On Trigger Switch
1893-6 0212085 9” Large Angle Grinder - 15 Amp w/ Lock-on Trigger Switch
18DC-5E 0253651 4-1/2" - 5" Dust Collect Cut Off Guard
18DC-6E 0253652 6" Dust Collect Cut Off Guard
18SG-5E 0253653 5" Surface Grinding Guard
18SG-7 0253654 7" Surface Grinding Guard
1974-8 0253644 7” Large Angle Grinder - 15 Amp w/ Lock-on Trigger Switch
1974-8D 0253643 7” Large Angle Grinder - 15 Amp w/ No Lock-on Trigger Switch
1994-6 0253646 9” Large Angle Grinder - 15 Amp w/ Lock-on Trigger Switch
1994-6D 0221979 9” Large Angle Grinder - 15 Amp w/ No Lock-on Trigger Switch
19DC-7 2121936 7" Large Angle Grinder Dust Guard
19DC-9 2121937 9" Large Angle Grinder Dust Guard
AG50-10TG 2161674 5” Tuckpointer Kit w/ AG50 Grinder and Tuckpointing Guard
BH2760VC 0223889 Brute™ Breaker Hammer Bare Tool
BH2760VCB 0259040 Brute™ Breaker Hammer Basic Kit (w/ Basic Cart, Flat Chisel & Moil Point)
BH2770VCD 2125562 Brute™ Turbo Breaker Hammer (w/Deluxe Cart, 2 Star Point & 2 Flat Chisels)
CSG15 2161675 5” Concrete Surfacing Grinder - 12.5 Amp w/ Dust Collection Shroud
DH1020VC 2125563 SDS-max® Inline Demolition Hammer w/ Vibration Control
DH507 2160167 SDS-max® Demolition Hammer
DH712VC 2160168 SDS-max® Demolition Hammer w/ Vibration Control
DXS2104 2160180 Speed Clean Dust Extraction Bit SDS+ 5/8x10x15
DXS2114 2160181 Speed Clean Dust Extraction Bit SDS+ 11/16x12-1/2x18
DXS2124 2160182 Speed Clean Dust Extraction Bit SDS+ 3/4x12-1/2x18
DXS5034 2160184 Speed Clean Dust Extraction Bit SDS Max 3/4x12-1/2x21
DXS5044 2160186 Speed Clean Dust Extraction Bit SDS Max 7/8x15x25
DXS5048 2160185 Speed Clean Dust Extraction Bit SDS Max 13/16x15x25
DXS5054 2160187 Speed Clean Dust Extraction Bit SDS Max 1x17-1/2x27
DXS5062 2160188 Speed Clean Dust Extraction Bit SDS Max 1-1/8x20x29
DXS5082 2160189 Speed Clean Dust Extraction Bit SDS Max 1-3/8x25x34
DXSMAX 2160190 Speed Clean Dust Extraction Bit SDS Max Adapter
DXSPLUS 2160183 Speed Clean Dust Extraction Bit SDS+ Adapter
GA50DC 2121935 5” Concrete Cutting Dust Collection Guard
GBH18V-26K 2121932 18V 1" SDS-plus® Rotary Hammer w/ (2) FatPack (6.0Ah) Batteries
GBH2-28L 2127961 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control & Kick Back
GDE18V-16 2183292 18V HEPA dust Collector Attachment
GWS10-45 2125568 4-1/2” Angle Grinder - 10 Amp w/ Lock-on Slide Switch
GWS10-45P 2125569 4-1/2” Angle Grinder - 10 Amp w/ Lock-on Paddle Switch
GWS10-45PD 2125570 4-1/2” Angle Grinder - 10 Amp w/ No Lock-on Paddle Switch
GWS13-50 2125571 5" Angle Grinder - 13 Amp w/ Lock-on Slide Switch
GWS13-50P 2125572 5" Angle Grinder - 13 Amp w/ Lock-on Paddle Switch
GWS13-50PD 2125573 5" Angle Grinder - 13 Amp w/ No Lock-on Paddle Switch
GWS13-50VS 2125574 5" Variable Speed Angle Grinder - 13 Amp w/ Lock-on Slide Switch
GWS13-50VSP 2125575 5" Variable Speed Angle Grinder - 13 Amp w/ Paddle Switch
GWS13-60 2125576 6" Angle Grinder - 13 Amp w/ Lock-on Slide Switch
GWS13-60PD 2125577 6" Angle Grinder - 13 Amp w/ No Lock-on Paddle Switch
GWS8-45 2126881 4-1/2” Angle Grinder - 7.5 Amp w/ Lock-on Slide Switch
Bosch # Fastenal # Description
GWS9-45 2125578 4-1/2” Angle Grinder - 8.5 Amp w/ Lock-on Slide Switch
HCD2074 2160177 Speed Clean Dust Extraction Bit SDS+ 7/16x7-1/2x13
HCD2084 2160178 Speed Clean Dust Extraction Bit SDS+ 1/2x7-1/2x13
HCD2094 2160179 Speed Clean Dust Extraction Bit SDS+ 9/16x10x15
HDC100 2121928 SDS-plus® Dust Collection Attachment (Drilling & Chipping)
HDC200 2121927 SDS-max® Drilling Dust Collection Attachment
HDC250 2121929 SDS-max® Core Bit Dust Collection Attachment
HDC300 2121933 SDS-max® Chiseling Dust Collection Attachment
HDC400 2121934 1-1/8" Hex Dust Collection Attachment
RH1255VC 2121924 2" SDS-max® Rotary Hammer w/ Vibration Control
RH228VC 0258717 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control "Bulldog Xtreme Max™"
RH328VC 0247995 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control
RH328VC-36K 2125567 36V 1" SDS-plus® Rotary Hammer w/ (2) FatPack (4.0Ah) Batteries
RH328VCQ 0247996 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control & QCC
RH432VCQ 0247997 1-1/4" SDS-plus® Rotary Hammer w/ Vibration Control
RH540M 2125561 1-9/16" SDS-max® Rotary Hammer
RH540S TBD 1-9/16" SDS-max® Rotary Hammer Spline
RH745 2160165 1-3/4" SDS-max® Combination Hammer
RH850VC 2160166 1-7/8" SDS-max® Rotary Hammer w/ Vibration Control
TG502 2160169 5" Tuckpointer Dust Guard
VAC002 2251955 1-1/4" or 1-1/2" Hose-to-35mm Port Adapter
VAC003 99412320 35mm hose-to-1-1/4" port Adapter
VAC004 99412321 35mm hose to-2-1/4" port Adapter
VAC005 99412322 35mm 16.4 ft. Standard (Friction-Fit) Vacuum Hose
VAC020 99412335 2-1/2" Hose-to-35mm Port Adapter
VAC024 2121956 Vacuum Hose Adaptor (Connects 1-1/4 - 1-1/2" Hose to 35MM Dust Ports)
VAC090A 2161628 9-Gallon Dust Extractor w/ Auto Filter Clean
VAC090AH 91162697 9-Gallon Dust Extractor w/ Auto Filter Clean/HEPA Filter/Fleece Bag
VAC090S 2161629 9-Gallon Dust Extractor w/ Semi-Auto Filter Clean
VAC140A 2161630 14-Gallon Dust Extractor w/ Auto Filter Clean
VAC140AH 91162698 14-Gallon Dust Extractor w/ Auto Filter Clean/HEPA Filter/Fleece Bag
VAC140S 2161631 14-Gallon Dust Extractor w/ Semi-Auto Filter Clean
VB000P 2121938 Disposable Plastic Bags - 9/14 Gallon (10 bags per package)
VB090 2121950 Paper Filter Bags - 9 Gallon (5 bags per package)
VB090F 2165341 Fleece Filter Bag-9 Gal (5 bags per package)
VB090F-30 2183294 Fleece Filter Bag-9 Gal (30 bags per package)
VB090R 2121955 Reusable Fleece Filter Bag - 9 Gallon (1 bag per package)
VB090S 2121953 Wet Filter Bags - 9 Gallon (5 bags per package)
VB140 2121951 Paper Filter Bags - 14 Gallon (5 bags per package)
VB140F 2121952 Fleece Filter Bags - 14 Gallon (5 bags per package)
VB140F-30 2183295 Fleece Filter Bags - 14 Gallon (30 bags per package)
VF100 2121942 Flat Paper (cellulose) Filter
VF110 91162700 Flat Polyester Filter
VF120H 2121930 Flat HEPA Filter
VF130H 91162701 Extended Life Flat HEPA Filter
VH1022 2121947 10ft, 22mm Hose
VH1035 2121940 10ft, 35mm Hose
VH1622A 2121945 Anti-Static 16ft, 22mm Hose
VH1635 2121943 16ft, 35mm Hose
VH1635A 2121944 Anti-Static 16ft, 35mm Hose
VX100 2121939 Bend, Anti-Static
VX110 2121948 3 Piece Chrome Extension Tube (3ft Total Length)
VX120 2121941 Powertool Adapter 22/35 mm
VX130 2121949 Floor Nozzle Set
1191VSRK 0212035 1/2" Hammer Drill w/ Case (7.0 Amp)
HD18-2 2125560 1/2" 2-Speed Hammer Drill (8.5 Amp)
HD21-2 0247986 1/2" 2-Speed Hammer Drill Kit (9.2 Amp)
BOSCHTOOLS.COM/PROGUARD AVAILABLE ANYTIME, ANYWHERE ON ANY DEVICE ▶ The latest, up-to-date product information
and specifications▶ OSHA regulation overview and silica insights▶ Connect with Customer Service via text,
email or phone▶ Access where-to-buy information easily
CONNECT WITH US
TOOL FINDERFind the right tool and accessory for your job▶ Trade specific▶ Application specific
LATEST NEWS ▶ Best practices▶ Events▶ Promotions▶ Press ReleasesNews and promotions
Robert Bosch Tool Corporation | 1800 W. Central Rd. | Mount Prospect, IL 60056Telephone 1-877-BOSCH99 | Fax 224-232-3169 | www.boschtools.com
2017-789
MAKE DUSTHISTORY
MOVE TOWARD OSHA COMPLIANCE WITH PRO+GUARD™ DUST SOLUTIONS