Make Blogger Template

8/3/2019 Make Blogger Template

1/30

Blogger Template Design: Tutorial 1

Introduction: Tutorials on Blogger Template Design

Tutorial 2: The Structure of a Blogger Template Code

Before designing a template, you must have an idea of what the basic structure of a template is.

Generally, the actual structure of any templates are not exactly the same. But, by knowing the

basic structure, you can easily get the ideas of how to tweak your existing templates, design a

template, and how to change it into a different structure.

Some parts of the template structure are obvious from what you can see on most blogs: the

headers, footers, and posts sections. But there are some sections (I'll call these sections blocks

or containers afterward) that are not visible on the computer screen, but important HTML-wise to

build a practical and proper working template.

To start off, a template structure basically contains blocks of containers that looks like this:

Going from the biggest to the smallest blocks:

1. Body: the outer most block is the Body of your template (basically everything that the computer

screen covers).

2. Outer-wrapper: this container covers your whole template (the body is more like the outside of

your template). In general, you build a wrapper to place a multiple of smaller blocks inside it. The most

common blocks inside this Outer-wrapper is the Header, Content, and Footer.

3. Header: this block is the top most part of your blog (the name is quite obvious). But inside the

Header you will have other sub-blocks too - the Header Title block, theHeader Description block, and others


2/30

such as the Adsense banners, a menu bar, etc. So, to wrap all these sub-blocks inside one large container,

the largest container in the Header section is usually a Header-wrapper that wraps everything inside.

4. Content: below the Header is the Content-wrapper - basically the most important container block of

all. Immediately inside this wrapper are the Sidebar containers (1,2 or any number of sidebars) and

the Main container (which contains your posts, comments, or some ads).

5. Footer: is the bottom most container of your template. As in the Header section, you'll also need

a Footer-wrapper to contain other sub-blocks in the Footer section.

6. Main: the Main-wrapper is the outer most container in the Main section which goes inside

the Content-wrapper. Inside this Main-wrapper are the Post block,Comment block, Date Header, and other

widgets created from the Add Page Element option.

7. Sidebar: is the block that contains all your side widgets - About

Me, Labels,Archive, Text, HTML, Adsense, etc. In a standard Blogger template, you will usually find only 1

sidebar - hence the 2-column template (Main and Sidebar). But it's actually easy to add multiple number of

sidebars. The most common ones are 2 sidebars - or the 3-column template. You will see from these tutorial

series that once you understand the template structure, it's actually easy to add and move the sidebars to

the left or right of your Main container.

8. Blog Post: this block contains the important stuff - your PostsTitles, Post, Post Author, Labels, etc.

One other way to see this structure is from the hierarchical point of view. Starting from the largest

container to its sub-containers, the structure looks like this:

Body Outer-wrapper

Header-wrapper

Blog Title

Blog Description

Other widgets

Content-wrapper

Sidebar-wrapper (1,2,3...)

Main-wrapper

Date Header

Posts

Post Title

Post Content (or called Post Body)

Post Footer (Author, Labels, etc)


3/30

Comments

Feed Link

Other widgets (mostly ad units)

Footer-wrapper

Footer text (disclaimer, copyrights, etc)

Other widgets

Once you understand this basic structure, it'll be easier to start learning about the structure of the

Blogger template code. Learning the code structure is not about learning HTML or CSS, but more

about how the template code is organized, which is pretty much like how the container structure

is organized. It's surprising that even with little knowledge on web programming, you can

customize your template quite a lot just by understanding the basic structure and

some CSS language.

***************************************>> Browse templates, Money tips, 6 comments


Tutorial 1: The Structure of a Blogger Template

Tutorial 3: The Structure of CSS Styling Section

Here's what the structure of a Blogger template code looks like, in a simple way of looking at it.

I'm using my Generic Blogger template as a reference, but the idea is the same for other

templates also. I've separated the code in 3 sections and show only the top lines of each section

so you can look for the starting lines later on.


4/30

To see more of these codes in detail, download my Generic Blogger Template.

Section 1:

The 'header' of the code. Basically it contains important information about the template code and

the title of your blog. Best of all, you don't have to worry about anything in this section. It's a

standard header for all templates. The only time you add some codes here is when you want to

put some meta tags (additional information about your blog for SEO).

Section 2:

This is the CSS Styling Section. CSS stands for Cascading Style Sheets, a web language used

to control the style of a HTML document. This is the section that you want to know the most if you

want to modify your existing template or design a new template. Eventhough it is a web

programming code, you can still do a lot of things on you template design if you understand the

structure of this section without knowing much about HTML and CSS. We'll get to this part in

more detail later.

Section 3:

This is the Body or Data of the code - the most important part that fetches all your content

from Blogger database and puts it in the right place into your blog when somebody is looking at

your blog. This is also the section that tells your blog which part comes first -

the Header, Sidebars, Main, Post, Footer, etc. But it doesn't set the appearance of the blog and

how it would look like on the internet (because that part is controlled by the CSS styling section).


5/30

You basically don't have to worry much about this part too, just like the 1st Section. But you will

have to know a little bit about this section if you want to start adding extra widgets that cannot be

put using the Add Page Element button, like the social bookmarking buttons -Digg, AddThis, RSS buttons; or if you want to putAdsense codes in special places like in

the Post Page; or putting Google Analytics code to track visitors to your blog; and many other

things. Most of the time, there are easy instructions already available to help you add these things

in your blog. So, again, nothing much to worry about in this section.

***************************************Blogger Template Design: Tutorial 3


Tutorial 4: Setting the Properties of a Container

In this tutorial, I'll show you the structure of CSS Styling Section, which is the 2nd Section in

the Blogger Template Code Structure. Again, not all templates have the same structure. Itbasically comes down to the personal style of a designer. But I've found out the structure that I'll

show you is quite logical and makes things a lot easier when coding, debugging, and customizing

your template. Once you've understood this tutorial, you can later change the style and structure

any way you want. But first you have to understand them and I've put out here a very easy

structure to understand and use.

I've cut down the CSS Styling Section into 9 smaller subsections. For now, I'll describe

the subsections in general. We'll get to the details on the coding inside these subsections later in

the following tutorials. Always refer to the Structure of a Blogger Template to help you understand

better the subsections and containers that I explain here.

Subsection 1 - Variable:

This subsection contains the declaration (the introduction) of the font and color variables that

appear in the Fonts and Colors tab in the Layout page. For example, the Text Color or the Text


6/30

Font variables that you can choose and modify using theFonts and Colors tab. In my templates,

I've added a lot of variables (close to 40+) compared to some of the standard Blogger templates

to make it easy for you to customize a lot of things on the template.

Subsection 2 - Global:

This part contains the code to control the general appearance and layout. If you look at the green

bar above, you'll see the code "body {.....}". This means that every code that goes inside

the{.....}will control the general properties (size, layout, & appearance) of the body of the

template (everything that the computer screen covers). For example, it controls the width of your

whole template and the background color or image. But it doesn't control the detailed properties

of the whole template (that is done by all the other subsections). Or, if you do set the detailed

properties inside the body container, say the Text Font, and then reset the same properties inside

a smaller sub-container, the properties set in the body container will be overridden, or canceled.

Inside this subsection, you will also find other important large containers - theOuter-wrapper and

the Content-wrapper - so this subsection is where you want to look for if you want to tweak

those containers.

Subsection 3 - Header:

This part controls the properties of everything inside your Header-wrappercontainer. The most

common ones are the Blog Title and the Blog Description. In most of my templates, I've added an

extra object in the Header-wrapper - theLinkbar (or the horizontal menubar). Typically, you can't

add extra object in theHeader because you can't use the Add Page Element tab. To add the

Linkbar, I had to change the 3rd Section of the template code structure (which is

the Datasection). In my own blog (dzelque.blogspot.com), I added something else, which is

the Google Search Bar. Ideally, you can add just about anything you want there, if you know how

to deal with the 3rd Section. We'll get to this later.


7/30

Subsection 4 - Main:

This part controls the properties (size, layout, and appearance) of everything that the Main-

wrapper block contains - the Date Header, the Post, the Comment, theFeed Link, and any

widgets that you drag into the Main section using the Add Page Element tab.

Subsection 5 - Sidebar:

This part controls the properties of everything inside your Sidebar-wrapper - for example

the Labels, Blog Archive, Adsense units, Link Lists, etc. But, it doesn't set how many sidebars

you have or their locations on the blog (example Sidebar-Main-Sidebar or Main-Sidebar-Sidebar).

That part is done in the Section 3 of theBlogger Template Code Structure - the Data Section.

Subsection 6 - Miscellaneous:

This part controls the properties of additional elements in your blog that's not controlled by all the

above subsections. These elements are the Profile (or theAbout Me block), the Blogquote, and

the Code. It means if you want to, say, change the color of the quoted text or the font of

your nickname in the About Meblock, this is where you want to look for to tweak it.


8/30

Subsection 7 - Post-Footer:

In my Generic Template, this part controls the properties of 3 things:

1. The Post-Footer - the texts below your post body. This is the part that contains information about

your post, or the texts that say "Posted by YourNickname,Labels: ....., 5 Comments, etc.

2. The Blog-Pager - the links at the bottom of your blog posts that say "Newer Posts,Home, or Older

Posts".

3. The Feed-Link - the link that says "Subscribe to: Posts (Atom)".

Subsection 8 - Comment:This part controls all the properties of the Comments section in your blog.

Subsection 9 - Footer:

This part controls all the properties in the Footer section. Generally, the Footersection contains

some text explaining the ownership or copyright of a blog. In some other blogs, they also put

extra stuff in the Footer section, like the Recent Posts or Popular Posts in 2 or more columns.

Basically, you can just put about anything in the Footer as in the Sidebar. But if you want to add

more than 1 column to your Footer, you have to tweak the 3rd section of your Blogger Template

Code Structure.

***************************************



Tutorial 5: Common Containers and Elements in a Blogger Template

In this tutorial, you'll know the basics of what code sets the properties of a container. To make

things simple, we'll look at 2 container blocks only - Main andPost. Once you know these, the

basic ideas for all the other containers are pretty much the same.


9/30

Here is a sample code for the 2 containers:

#main {

margin: 0px 0px 0px 0px;

padding: 0px 0px 0px 0px;

min-width: 400px;

max-width: 400px;

background: $mainbgColor;

color: #111111;

font: $textFont;

}

.post {

margin: 0px 20px 10px 0px;


line-height: 1.5em;

text-align: left;

background: $postbgColor;

}

The #main and .post are the titles of each containers. Each container codes must be contained

within {...}. For the explanation below, we'll focus on the codes inside the post block, especially

for the explanation on the margin and padding (the codes colored in red).


10/30

Margin - sets the distance between the border of the container to the border of a parent (larger)

container outside it. There are 4 numbers defining the Marginproperty. The 1st number sets the top margin,

the 2nd sets the right margin, the 3rd number sets the bottom margin, and the 4th number sets the left

margin. It basically sets the whole margin in a clock-wise fashion starting from the top. In the case above,

the parent container for the post container is the main container. See how the dashed border for the blue

(post) container is placed inside the green (main) container following the post block's margin command (the

codes in red). If the post's margins are all set to zero, then the post container would be exactly the same

size as the main container. Think of the Margin as a command that moves its border away from a parent

border. Another thing, Margin can have a negative value, which means that it moves toward the parent

border and may overlap it (not away from it).

Padding - sets the distance between the border of the container to the border of a child (smaller)

container inside it. In the case of the post container, the child container is the post-body. The 4 numbers

defining the padding sets the padding in a clock-wise fashion also, just like the Margin property. See how

the post's padding puts the post-body inside the post container, away from the dashed border. Unlike

the Margin, think of the Padding as a command that moves a child border away from its

border. Padding values cannot be negative.

Min-width and Max-width - sets the width of the container. Usually, it's enough to write it as width

= 400px (for example), but it's becoming more of my habit to set the width as strict as possible, because I

sometimes saw that if it's not written strictly, the container width might shrink and expand freely on some

situations and in some different browsers. So by setting the width strictly, I made sure that it looks exactly

like I want at all times in all browsers (basically getting rid of alignment bugs). If you look at my newer

templates, I even set the width redundantly, say inMain-wrapper and then in Main containers eventhough

they are pretty much the same. Doing it this way solves some alignment bugs that I saw (eventhough I don't

really understand why it solves it by writing it redundantly).

Background - sets the background color of the container. It uses the hexadecimal code for colors.

See here for all the color values. You can also set a background image that repeats itself to cover the whole

container block. The way to do this is by pointing to the URL of an image. For details on how to do this,

see W3Schoolstutorials. You can also set the value to be $samplevariable, where the variable is the one

that you define in Subsection 1 in CSS Styling Structure.

Color - sets the color of your text using the hexadecimal color code, or the variable defined earlier

in Subsection 1.

Font - sets the font of your text. You can use the variables set in Subsection 1 also.

See W3Schools tutorials for more details on setting the font properties.


11/30

Text-align - sets the alignment of your text. The 3 options are either left, center, or right.

Line-height - sets the distance, or height, between two text lines.

My tutorial just gives the basic idea on some of the codes in the Bloggertemplates. I'd say themost important ones for a basic understanding are themargin and padding commands. If youwant a more detailed explanation on CSSstyling language, I recommend w3Schools CSSTutorial as a quick and easy resource center.



Tutorial 6: Using the Generic Blogger Template

Here's a list of all the common containers and elements in a Blogger template and their funtions

(elements are basically any object that make a blog funtions and containers are large elements

that contains smaller elements or some other contents).

These common elements that I'll show are not necessarily the elements that exist or must exist in

all Blogger templates, but are just some common elements that controls a large part of your

template style. Knowing these elements will make it a lot easier for you to know where to look for

in the template code and how to deal with other new elements that you may find in other

templates.

I'm not going to list all the elements, but only enough elements so that you get the ideas and can

understand all the other elements on your own. I will refer to the images from the CSS Styling

Section below to make things easier to follow.

The symbols # and . show the attributes of the element (sort of a classification of the element

type). But you don't have to worry much about this for now. If you want to know more about this, I

suggest the W3Schools tutorials.

Global:


12/30

body {.....} - general properties for the whole template.

#outer-wrapper {.....} - the starting and largest container for all your template contents. Inside this

is the header-wrapper, content-wrapper, and footer-wrapper.

#content-wrapper {.....} - the wrapper that contains sidebars and main containers.

a {.....} - this sets the overall properties of your link text.

a:visited {.....} - this sets the overall properties of your visited link text.

a:hover {.....} - this sets the overall properties of your link text when the mouse hovers over it.

Because all element codes must be contained within the {.....}, I'll just write the element titles after

this.

Header:

#header-wrapper - the container that wraps your Blog Title and Blog Description.

#header - the container just inside the header-wrapper.

#header h1 - the command inside this containers controls the appearance and layout of your Blog

Title.

#header h1 a - controls the properties of the Blog Title as a link text.

#header .description - the properties of your Blog Description.

#header a img - controls the properties of an image inside your header container.

Main:

#main-wrapper - the container that wraps your Date Header, Blog Posts,Comments, Feed Link,

and any widgets that you drag above or below the Blog Posts.

#main - the container just inside the main-wrapper.


13/30

#main .widget - controls the properties of all widgets inside the main container.

h2.date-header - sets the properties of your Date Header (just above your Post Title).

.post - sets the properties of your Blog Posts container.

.post h3 - sets the properties of your Post Title.

.post-body p - sets the properties of the body or content of your post.

.post ul - sets the properties of an unordered list (a list that is not numbered).

.post ol - controls the properties of an ordered list (a numbered list).

.post li - controls the properties of the individual list inside an unordered list or anordered list.

a img - controls the general properties of an image (the a refers to a link; and an image is by itself

a link).

Sidebar:

.sidebar-wrapper - the container that wraps all elements and contents in asidebar.

.sidebar - the container just inside the sidebar-wrapper.

#sidebar1 - sets the properties inside sidebar1.

#sidebar2 - sets the properties inside sidebar2. If you want the properties

insidesidebar1 and sidebar2 to be the same, than you can just the properties inside.sidebar and don't have

to even write down the #sidebar1 and #sidebar2 in yourCSS code.

.sidebar .widget - controls the properties of all the widgets (the Added Page Element) in your

sidebar.

#sidebar1 .widget - only sets the widgets in sidebar1.

.sidebar .BlogArchive - sets the Blog Archive properties. Technically, this is a sidebar widget too,

but I'm not sure why setting the properties for sidebar widgets doesn't change any properties for the Blog

Archive. That's why I have to write down the .BlogArchive command to set its properties.

.sidebar h2 - sets the title/header properties of a sidebar widget.

.sidebar #BlogArchive1 h2 -sets the properties of the Blog Archive's title.

Miscellaneous:

Technically, the Profile (About Me) container is placed inside a sidebar, but I'm putting it in

the Miscellaneous section because there are many smaller elements that belong together with

the Profile container and putting it in the Miscellaneousreduces the mess.

#Profile1 - sets the properties for the About Me block.

#Profile1 h2 - sets the title/header for the About Me block.

.profile-img a img - sets the image in the About Me block.

.profile-textblock - sets the author description About Me block.

.profile-data - sets the author's data in the About Me block.


14/30

.profile-datablock - sets the overall blocks of data in the About Me block.

blockquote - sets the quoted text in your posts.

code - sets the text contained within the code tags in your posts.

Post-Footer:

.post-footer - sets the overall properties of the post-footer container.

.post-footer-line - sets the properties for each new lines in the post-footer.

.post-footer a - sets the link text properties inside the post-footer.

.post-footer .post-comment-link a - sets the "comment" link inside the post-footer.

#blog-pager - controls the properties of the "newer posts", "home", and "older posts" links.

#blog-pager-newer-link - controls the properties of the "newer posts" link.

#blog-pager-older-link - controls the properties of the "older posts" link.

.feed-links - controls the "Subscribe to: Posts (Atom)" link.

Comment:

#comments - sets the overall comment container's properties.

#comments a - sets the link text properties inside a comment container.

#comments h4 - sets the header of the comment container.

.deleted-comment - sets the properties of the deleted comment.

.comment-author - sets the properties of the comment author.

.comment-body p - sets the comment body properties.

#comments ul - controls the unordered list inside a comment container.

#comments li - controls the individual list inside a comment container.

Footer:


15/30

#footer-wrapper - the container that wraps all elements and contents inside a footer section.

#footer - the container just inside the footer-wrapper.

#footer h2 - sets the properties of the footer title/header.

#footer .widget - controls the footer widget properties.

.footer a - controls any footer link texts.

Now that you know these containers and elements, you'll know where to look for in the template

code whenever you want to change something about your template (fonts, text colors,

background colors, padding, etc). What you do then is simply modify the codes inside the {.....} for

that container or element only.



Tutorial 7: Setting the Template Size

Here I'll explain how you can use the Generic Blogger Template to practice on tweaking the

codes and modifying your templates. The ultimate goal is surely for you to know how to design

your own template, but knowing how to modify the template first (and to get a feel how the

template 'react' to your code modification) is an important step that you need to go through before

starting to design your own template.

Changing your template is not as simple as changing or adding some codes, hitting the "View

Blog" button, and thinking that everything will go as perfect as you plan. Lots of the time you'll see

things go off differently from what you've expected. Especially if you're not a web programmer.

I'm not one and I did go through a lot of going back and forth between the "Edit HTML" page to

the "View Blog" page before getting what I really wanted.

So the best thing to do is really to experiment first with the 'behavior' of the template codes, see

how they make your template change, and finally understand (more or less) why they change the

way they change: simply put - be ONE with the code!

To make it easier for you, I've created a Generic Blogger Template that you can download to play

around with. To be honest, it's an ugly template, but the different container colors will help you

see how things actually change. The first thing you need to do is create a Test Blog using

your Blogger account. Then upload theGeneric Blogger Template into your Test Blog. Put a few

posts with lots of text, images, and add some sidebar widgets too so that you can see a

more realistic effect.

The next step is just to start playing around. It's best to do things one by one. Say, choose one of

the containers, the header-wrapper maybe (look in Tutorial 5), and change some of the command

codes for that container. Then view the new templates to see if the changes is really what you've

expected. As starters, try to play around the most with padding and margin (playing with colors,

fonts, or anyappearance-setting commands are not as challenging as playing with layout-


16/30

setting commands). Don't play yet with the template size-setting commands like the width of

containers because this involves other containers also and can get really messy. We'll do this

later. Once you're confident with how things behave in one container, move on to othercontainers or do multiple containers in one go.

Within a short time, you'll be confident enough with this Generic Blogger Templatethat you can

start tweaking your own blog template codes. At this point, I won't say that you'll know everything

there is to know about tweaking codes, but you'll know enough to do considerable makeover on

your template and enough to start learning new things and dealing with new problems on your

own. The key point here is your coding skills will grow in time - May the CODE be with you!



Tutorial 8: The Body Section of the Blogger Template Code

Setting the template size is probably one of the first things you need to do when starting to design

a new template. The are two ways to set the size (basically the width) of a template:

1. Setting the size to be fixed with a certain width, say 800 pixels.

2. Setting the template to have a fluid size, which means the width changes with the browser or

screen size.

Setting a fixed template size:

To set a template width, you actually have to set the width of a few large containers. The most

common containers to set the widths are:

1. Body

2. Outer-wrapper

3. Header-wrapper

4. Content-wrapper

5. Footer-wrapper

6. Main-wrapper

7. Sidebar-wrapper*

8. Footer-wrapper*Note: You can also just set the widths of sidebar1 and sidebar2 containers without setting

the sidebar-wrapper width. Setting the sidebar-wrapper width is convenient if both sidebars have

equal widths.

In most of my newest templates, I also set the widths in the containers just inside some of the

wrapper containers (which is redundant) to avoid some minor alignment bugs that may appear.

The widths of these containers are set equal to the widths of their parent wrapper containers.

These containers are:

1. Header


17/30

2. Main

Here is a sample code from

the Generic Blogger Template showing you all the container widths that are set to make sure the

template width is properly set (only the part that concerns the width-setting are shown). In this

sample, the template width is set at 800 pizels.

body {

min-width: 800px; }

#outer-wrapper {

margin: 0 auto; /* to make the template lays in the screen center */

min-width: 800px;

max-width: 800px; }

#content-wrapper {

min-width: 800px;

max-width: 800px; }

#header-wrapper {

min-width: 800px;

max-width: 800px; }


18/30

#main-wrapper {

min-width: 400px;

max-width: 400px; }

.sidebar {


min-width: 180px;

max-width: 180px; }

#sidebar1 {.....}

#sidebar2 {.....}

#footer-wrapper {

min-width: 800px;

max-width: 800px; }

The body is set with a command min-width = 800px, which means that the smallest width it

should have is 800px. If it's set with a command width = 800pxonly, then the template width might

shrink in some situation. Setting it with a min-width guarantees the smallest size it will take.

The next container just inside the body is the outer-wrapper. It's usually common to set it with a

command width = 800px only. But as I've explained about my strictness in setting the width to

avoid any alignment bugs, it's becoming my habit to always set the container to have a min-

width and max-width of the same value so that the container size is exactly that size - it will not


19/30

shrink or widen to any different value. Another thing about the outer-wrapper is that this is where

you set the command to either place your template at the center of screen or float to the left of it.

In this case, setting margin: 0 auto will float the template to the center. Just writing margin: 0 will

float it to the left as a default position.

The next 3 large containers, the header-wrapper, the content-wrapper, and thefooter-wrapper is

usually set to be the same size; in this case it's 800px. In any case, they can be set smaller than

the outer-wrapper width but not any bigger than that because the outer-wrapper 'wraps' these 3

containers inside it. Another thing, if you add left and right borders, then you'll increase the width,

and the outer-wrapper will just cut out whatever that's bigger than itself on the right side. So, if

you do add borders, say 2px left and 2px right for the header-wrapper, then you have to settheheader-wrapper width to be 796px so that the total would be 796+2+2 = 800px. The same

goes for all the other containers.

The last 3 containers are the 2 sidebars and the main-wrapper. Because they sit side by side, you

have to make sure the total width = 800px or less, but certainly not more. In this case, I set

the main-wrapper to be 400px and both the 2 sidebarsto be 200px. But because I added padding

of 10px left and right of each sidebars, which pushes the sidebar border outward, I'd have to

reduce the sidebar width to be 180px so that the total sum after adding the pads would be 200px.

You have to note that the largest sidebar container is the sidebar-wrapper (not just the sidebar). I

could have set the width of the sidebar-wrapper instead of the sidebar, but I prefer to set

the sidebar width because sometimes I may set the 2 sidebars to have different widths. But, this

is all just a matter of personal style; other template designers may have different way of setting

this sidebar widths. As long as it works, that's all that matters. >> Browse templates, Money tips, 5

comments



Tutorial 9: More Explanation about the Body CodeIn this tutorial, I'll explain the basic structure of the Body of the code so that you get the idea on

how it works with the rest of your code. The code is located inSection 3 of the Blogger Template

Code Structure. This is the main part of theBlogger template code that retrieves the data to be

displayed on your blog. It's basically the core part that makes your whole blog functions. The

code that sets how it appears on your blog is the CSS Styling code.

Refering back to the tutorial Blogger Template Code Structure, the Body code is inSection 3 as

shown in the image below.


20/30

Shown below is the Body code copied exactly from the Blogger Edit HTML page with the 'Expand

Widget Button' unchecked. I do not want to include the complete code by checking the 'Expand

Widget Button' for 2 reasons. First, it's not necessary to do this. You actually don't even have to

know what goes on inside the complete code to be able to design a properly working Blogger

template. That's all been done 'automatically' by Blogger, which is the beauty of using this new

Blogger template as oppose to the old classic ones. Second, by looking at this simpler version of

the code, you'll be able to grasp easier the main idea of how all the containers in the template are

laid out.

skip to main |

skip to sidebar


21/30

For simplicity, ignore the code in light grey. They are either comments or 'default' codes to make

things work properly that doesn't need to be tampered with. The core part of the codes can be

sectioned into 4 parts:

1. Header (in red)

2. Main (in green)

3. Sidebar (in red)

4. Footer (in brown)

You'll see in the above that all the codes are first wrapped in the body tag, followed by the outer-

wrapper tag, then the wrap2 tag. These wrappers are used to group the containers together so


22/30

that they can be easily editted together. Using wrappers also make placing the containers much

easier especially if you want to use additional sidebars or extra containers (such as a banner or

linkbar containers as in most of my templates). In the explanation below, I 'll only refer tothe outer-wrapper as the larger wrapper without referring at all to the wrap2 wrapper. They're just

the same (I'm not even sure why the wrap2 is there in the first place).

Inside this large container, you'll see 3 wrappers - header-wrapper, content-wrapper, and footer-

wrapper. They are positioned vertically with the header-wrapperbeing at top and the footer-

wrapper being at the bottom. It's simply because in the code, the header-wrapper is called first,

followed by the content-wrapper, and finally the footer-wrapper. At this point, you don't even have

to know what's inside thecontent-wrapper - this makes it much cleaner and easier as oppose to

not having the content-wrapper and having to deal with the main-wrapper and sidebar-

wrappertogether all at once. It'll be a big mess then.

Because the outer-wrapper is the largest wrapper, you have to make sure that the widths of all

the other wrappers inside it is less or at least equal to the outer-wrapper's width. But, if you add

borders, that'll add extra pixels to whichever wrapper that you're adding the borders too. So be

careful when adding borders!

Adding a new wrapper (container) in between any of these wrappers is easy. Just paste in a

wrapper code (see below for example) and rename it with a new name, say a banner-wrapper.

The preferred='yes' command will make an 'Add Page Element' button that'll allow you to create

new widgets.

Adding a wrapper only creates a new container, or block, in your blog. In doesn't set how it's

going to look or where it's going to be located. To customize how it looks and where it's located in

the blog, you NEED to tweak the CSS codes.

Inside the content-wrapper, you have the main-wrapper and sidebar-wrapper. To have these two

wrappers side-by-side as commonly seen in blogs, you have to set the widths of these 2

wrappers such that it's equal or less than the width of the content-wrapper. Plus, you have to add

certain commands in the CSS Styling code so that they'll sit next to each other. Otherwise, they'll

just fall vertically on top of one another. Typically, you need to use the 'float:left' command for

this. See some template examples to check more on this. If you want to add more sidebars, say a

3-column template, you simply need to add more sidebar-wrapper code (in blue). Read more

in Tutorial 10 to know how to add or change sidebars.

Once you've understood the basic idea behind the Body code, it's easy to see now why the


23/30

common structure of the Blogger template code looks the way it is (see below for a 3-column

example). If you want to rearrange or add new containers or wrappers, what you simply need to

do is to modify the Body of the code. It's that easy! But then, you have to tweak the CSS code toset how it's gonna look in the blog.



Tutorial 10: Making a 3-Column Template and More ...

In this tutorial I'll explain a bit more about some special commands that you'll see in

the Body section of the code. Here's the sample code again below:

skip to main |

skip to sidebar


24/30

By default, each container has to be wrapped with the div tag and a b:section tag. Each div


25/30

and b:section is 'named' with an identifier using the id command. The can be further classified

into a 'class' using theclass command. This identification and classification are useful as a

reference when you want to style it later using CSS. In the CSS code, the id command is referred

to using the # symbol and the classcommand is referred to using the . symbol. For example, in

the CSS code, you might see #main-wrapper {...} or .sidebar {...} which are the codes to style

themain-wrapper and sidebar. You can read further about these identification and classification

in w3schools.com

Everything wrapped inside the b:section are the widgets (also called the Page Element). For

example, inside the Header is a widget named Header1. Note that this widget contains the

code maxwidgets='1' showaddelement='no'. Themaxwidgets='1' means that the maximum widgetthe header-wrapper can have is 1 only. That means you can't drag a Page Element and place it

below or above theHeader. The showaddelement='no' means that the Add a Page Element button

will not appear in the Header section.

In the main-wrapper, you only have the showaddelement='no' code which means that you won't

have the Add a Page Element button there, but you can still drag other widgets and place it

above or below the Blog Posts inside the main-wrapper.

In the sidebar-wrapper, you have the preferred='yes' code. This command will create the Add a

Page Element button for you to add widgets. Plus, you won't have any limitations on how many

widgets you want to add. As you already know, you can always drag the widget to any other

wrapper as long as they don't limit the amount of widgets to be displayed in that wrapper.

In the footer-wrapper, there's no code following the id command. This means that you won't have

the Add a Page Element button but you can drag any widgets into the Footer section.

>> Browse templates, Money tips, 10 commentsBlogger Template Design: Tutorial 10

Tutorial 9: More Explanation about the Body Code

Tutorial 11: Starting Your Own Blogger Template

One of the most basic desires after becoming a Blogger's blogger and using the standard

template for a while is having the urge to find a 3-column template. So, here's a simple and

straight-forward tutorial on how to do this yourself without going through too much of code

tweaking.

This tutorial is prepared assuming you understand the stuff covered in Tutorial 8and Tutorial 9,


26/30

which explain the basics of the Body section of the code.

What we'll be doing to change or add sidebars is simply tweaking the XML code directly fromthe Blogger Edit HTML page WITHOUT turning the Expand Widget Templates on. This means

that the Body section at the end of the code won't be shown cluttered with detailed algorithms for

widgets and post data. It'll be as simple as it can be, which is definitely a good thing :).

Adding a Sidebar to Make a 3-column Template:

When you scroll down to the Body section, the code might have something that looks close to this

example below (note that you can have slightly different variations of this code for different

templates):

Example of a 2-column template:

The above shows a 2-column-template code within a wrapper called the content-wrapper which

contains the main-wrapper (which contains the Blog Posts) and thesidebar-wrapper.

To make another sidebar, what you need to do is simply go to the Edit HTML page

and without turning on the Expand Widget Templates box, paste another block ofsidebar-

wrapper code (shown above in red) before or after the main-wrapper block. For example, to make

the Sidebar-Main-Sidebar column, place it before the main-wrapper. Notice in the example below

that the id of the 1st sidebar-wrapper issidebar1 and the id of the 2nd one is sidebar2.


27/30

Note: You also have to make sure that the width of both Sidebars and the Mainblocks will fit

inside the content-wrapper and that the CSS code is properly written for the Sidebars to lay next

to each other. Some common mistakes are that one or both Sidebars will fall belowthe Main block.

Example of a 3-column S-M-S template:

Changing the Sidebar Location:

If you want to change a sidebar location to make a 3-column template with a configuration

of Main-Sidebar-Sidebar for example, what you need to do is place the sidebar-wrapper block

where you want it to appear.

To do this, simply go to the Edit HTML page and without turning on the Expand Widget

Templates box, cut the 1st sidebar-wrapper code and paste it in between the main-

wrapper and sidebar2 blocks. See the sample code below:

Example of a 3-column M-S-S template:


28/30

Now you basically know how to add or change sidebar locations. They're that simple!



Tutorial 12: How To Embed Images as Background

Now that you've gone through all the tutorials, you're pretty much ready to start designing your

own template. In this guide, I'll show you the big steps that you have to go through to make a

template the fast and easy way.

The first thing you need to understand about designing a template is that the technique of

designing is unique and different between individuals. In the end, it's entirely up to you how youwant to do it - if and only if you're familiar and have made a few templates yourself. But if you're

just beginning, it's best to follow a step-by-step guide to expedite the process and so that you

won't get lost.

Step 1 - Choose an already-made template as a starting point:

For beginners, the easiest and fastest way to start designing is by starting from an existing

template. But don't do it with the intention of plagiarizing it! Read more in the sub-post Start


29/30

Designing from an Existing Template.

Step 2 - Setting the number and location of your sidebar columns:

If you're a beginner, make sure you start with a template that closely resembles the template that

you have in mind. For example, if you want to do a 3-column template, don't start with an existing

2-column template. Or, if you want to change or add more sidebars yourself, read more about

how to do it in Tutorial 10: Making a 3-Column Template and More ...

Step 3 - Setting the width of your template:

The first thing you need to do after getting a starting template is to set the width of your template.

To do this, you need to set the width in the CSS Style code. It's all explained in detail in Tutorial

7: Setting the Template Size. The common containers to set the widths are:

body

outer-wrapper

content-wrapper

header-wrapper

main-wrapper

sidebar-wrapper (or sidebar1, sidebar2, and so on)

footer-wrapper

You can either set the width to be fluid (changes its width accordingly with the browser or screensize) or set the width to be fixed. Note that setting the width inside the container-wrapper can be abit tricky because you have the Main andSidebar containers in it. If the width is not set well,the Sidebars can fall below theMain container.

Step 4 - Build test objects:

If you're designing a new template, how do you know that what you're tweaking is right if youcan't see the changes? So, what you need to do here is build some test objects - for examplepost 3 or more test posts that have a quote, a numbered list, un-numbered list, make lots ofwidgets to see how the sidebars look like, make sure you have some Labels to show up inyour Labels widget, make some test comments to see how they look, and so on.

Step 5 - Tweaking the CSS code to customize your blog's appearance:

Here is where you start tweaking the CSS code to customize the basic layout of your blog andslowly refining it until you have the template that you want. It's a process that keeps you goingback and forth re-tweaking codes because you won't usually get things perfect the first time.Read more detail in the sub-post Tweaking the CSS Code.

Step 6 - Testing in other browsers:

This step can get really annoying, but like they say, you've got to do what you've got to do. Readmore in the sub-post Testing and Viewing in Other Browsers.

Step 7 - Using images as background:


30/30

If you're bored of using plain color, you can use nicer images as the background of the wholeblog or the background of some of the containers (e.g. the Post, Sidebar,Footer, Header, etc). To

learn how to do this, click on Tutorial 12: How to Embed Images as Background.

Step 8 (The Final Step) - Finalizing your template:

This step is like the proof-reading stage of your writing. You just need to go through one last stepto double check that everything works fine and okay. Look at your blog carefully and see if someminor tweaking will make it

Tutorial 1: The Structure of a Blogger Template








Tutorial 9: More Explanation about the Body Code


Tutorial 11: Starting Your Own Blogger Template

Tutorial 12: How To Embed Images as Background

Documents

Make Blogger Template