MAJOR SILICONE

MAJOR SILICONE MISCONCEPTIONS REVERSED:

• Do silicones degrade in the environment? Yes. Silicones degrade ultimately returning to sand, carbon dioxide and water.

• Are silicones sustainable? Yes. Silicones are derived from sand the second most abundant mineral on earth.

• Do silicones cause acne, allergies, or clog pores? No. Silicones are inert, non-reactive materials that have proven to be non-comedogenic and are extremely safe for topical use.

• Is natural safer? Natural is equated with “safety”, and yet ironically essential oils are a prime example of natural ingredients laden with allergens.

In the world today ingredient transparency and education in beauty products has become the standard expectation among consumers. It is the responsibility of all parties involved from marketers, manufacturers, retailers, and influencers to collaboratively develop ingredient transparency along with quality consumer education to properly inform beauty users of which materials are safe and unsafe. When we allow misinformation to flourish, alarmism is created and spread rapidly through social media platforms, exaggerating danger and causing the unnecessary excitement of fear. As related to Grant Industries, there are many misconceptions about the use of silicones (and other ingredients) in beauty products that are unfortunately driven by marketers and influencers who are not aware of the actual facts or science in regards to ingredient safety and behavior. At Grant Industries we are dedicated to offering ingredients that are safe for consumer use. Our goal is to help educate the beauty world on the positive benefits that silicones provide, as well as reverse the misconceptions.

WANT TO LEARN MORE? Watch Busting Silicone Myths by @labmuffinbeautyscience on

YouTube or visit our info page www.grantinc.com/cleanbeauty.

2

SKINCARE:4 MELT THE DAY AWAY CLEANSER, G11344-28130.05

5 FIRM & BLUR EYE CREAM, G61350-375.01

6 WHIP TEXTURE CREAM, G11356-28129.03

7 SLIP & SLIDE, G103-611.02

8 INFINITY SERUM, G61362-379.01

9 B2B ROYAL TEA MINERAL SPF~25, G61020-351.04

10 ZINC LOTION SPF~40, G1998-2794.02

11 ZNO UV STICK SPF~40, G61386-3130.01

12 CHAMOCADO TREATMENT, G11340-28134.04

13 BLUEBERRY BUTTERCREAM, G61346-374.02

14 SNOW MASK, G6986-318.03

COLOR COSMETICS:15 ILLUMINATING PRIMER BALM, G61316-363.02

16 LUXURY FOUNDATION G61317-364.02

17 NATURAL LITE COVERAGE FOUNDATION G61138-2116.04

18 SPFOUNDATION ~20, G61336-378.03

19 INSTAGLAM CONCEALER, G61320-367.03

20 BROWOW STICK, G61297-353.01

21 SHIMMER MANIA MOUSSE SHADOW, G61319-366.02

22 ELECTRIFYING LIQUID EYELINER, G61318-365.03

23 SHEA’S NUDE MATTE LIPSTICK, G61296-362.01

24 PUCKER UP METALLIC GLOSS, G61361-376.06

25 VELVET KUSH BLUSH, G11333-28133.03

26 GLOWGETTER, G61349-357.04

CONTENTS

3

4

MELT THE DAY AWAY CLEANSER

Part Ingredient INCI Name % (wt)

A JEECHEM CEO Cetearyl 2-Ethylhexanoate 47.39

PROTACHEM CTG Caprylic/Capric Triglyceride 10.00

NIKKOL TGI-20 PEG-20 Glyceryl Triisostearate 3.00

PERFORMALENE 400 POLYETHYLENE

Polyethylene 6.00

GRANSIL OGH Undecane & Tridecane & Polysilicone-11 15.00

SWEET ALMOND OIL Prunus Amygdalus Dulcis (Sweet Almond) Oil 2.00

AVOCADO OIL Persea Gratissima (Avocado) Oil 2.00

REFINED CANDELILLA WAX MD-21

Euphorbia Cerifera (Candelilla) Wax 6.00

GRANSIL PSQ Polymethylsilsesquioxane 5.00

HEMP MCT BCR* Caprylic/Capric Triglyceride & Cannabis Sativa Flower/Leaf/Stem Extract 3.00

VITAMIN E ACETATE Tocopheryl Acetate 0.10

GRAPEFRUIT OIL WHITE Citrus Paradisi (Grapefruit) Peel Oil 0.50

FD&C BLUE NO. 1, 25% IN CASTOR OIL

Ricinus Communis Seed Oil & Blue 1 0.01

Total 100.00

Procedure

1. Combine Phase A in the main kettle equipped with a homogenizer. Heat to 90-95C. Mix until uniform.2. Pour samples at 60C.

* BCR (www.BCRingredients.com) G11344-28130.05

#grantindustries #feelthis6! #thebloggeredition #didyouknow? #cleanbeauty101

5

FIRM & BLUR EYE CREAM


A DEIONIZED WATER Water 42.45

GLYCERIN Glycerin 1.00

BIOWAVE BCR* Water & Propanediol & Polyglutamic Acid & Phenoxyethanol 2.00

GRANSOME HEPTAPEPTIDE-7 Water & Carnosine & Glycerin & Heptapeptide-7 & Propanediol & Xanthan Gum & Lecithin & Citric Acid & Sodium Benzoate & Potassium Sorbate

5.00

ROYAL TEA IQ* Water & Camellia Sinensis (Purple Tea) Leaf Extract & Ipomoea Batatas (Purple Sweet Potato) Root Extract & Oryza Sativa (Purple Rice) Hull Extract & Lactobacillus Ferment Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

2.00

GRANSIL EP-9 Polysilicone-11 & Water & Laureth-12 & Phenoxyethanol & Ethylhexylglycerin 15.00

CAFFEINE Caffeine 0.10

KELTROL CG-F Xanthan Gum 0.15

DIOCIDE Caprylyl Glycol & Phenoxyethanol & Hexylene Glycol 1.00

B JEECHEM CTG Caprylic/Capric Triglyceride 5.00

GRANSIL SBG-11 Dimethicone & Polysilicone-11 & Butyrospermum Parkii (Shea) Butter 10.00

MONTANOV 202 Arachidyl Alcohol & Behenyl Alcohol & Arachidyl Glucoside 2.50


OLIVEM 1000 Cetearyl Olivate & Sorbitan Olivate 3.50

CETYL ALCOHOL Cetyl Alcohol 1.00


CHOLESTEROL NF Cholesterol 0.20

RITA SSO Helianthus Annuus (Sunflower) Seed Oil 2.00

C SEPINOV EMT 10 Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer 2.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a homogenizer. Mix well and heat to 70-75C.2. Weigh Phase B in a side kettle equipped with a marine type propeller. 3. Add Phase C to Phase B while mixing. Then, heat to 75-80C.4. When at proper temperature, add Phase BC to Phase A. Mix for 10-15 minutes.5. Cool batch to room temperature with side sweep agitation.


#skinsafetymatters #nontoxicbeauty #myP11beauty #siliconesRsafe

6

WHIP TEXTURE CREAM



BUTYLENE GLYCOL Butylene Glycol 4.00

JEECIDE CAP Caprylyl Glycol 0.80

TRIS AMINO Tromethamine 0.50

TWEEN 20 Polysorbate 20 0.20

PELEMOL G 7A Glycereth-7 Triacetate 1.00

HEALING HIVE BCR* Water & Honey (White) Extract & Phenoxyethanol & Sodium Benzoate 3.00

GRANPOWDER QSC Polymethylsilsesquioxane/Silica Crosspolymer 3.00

B GRANSIL SIW-066 Dimethicone & Polysilicone-11 & Butylene Glycol & Water & Decyl Glucoside 12.00

GRANPOWDER EDC-600 Divinyldimethicone/Dimethicone/Phenylsilsesquioxane Crosspolymer 5.00

DIMETHICONE, 5 CST Dimethicone 8.70

EMULGADE PL 68/50 Cetearyl Glucoside & Cetearyl Alcohol 1.50

JEECHEM GMS-165 Glyceryl Stearate & PEG-100 Stearate 1.70

BEHENYL ALCOHOL S75 #269 Behenyl Alcohol 0.50

RITA CETEARYL ALCOHOL 70/30 Cetearyl Alcohol 1.50

PALMITIC ACID Palmitic Acid 0.25

C BUTYLENE GLYCOL Butylene Glycol 3.00

ARON NT-Z Sodium Acrylates Crosspolymer-2 0.60

D GRANSIL 530 Dimethicone 1.00

Total 100.00

Procedure

1. Combine Phase A in the main kettle equipped with a homogenizer. Heat to 80-85C. Mix until uniform.2. Combine Phase B in a side kettle equipped with a marine type propeller. Heat to 80-85C.

Mix until uniform.3. When at proper temperature add B to the main kettle. Mix until uniform. 4. Combine Phase C in a side kettle then add to the main kettle. Mix until uniform.5. Cool batch to 50-55C then add Phase D. Mix until uniform. 6. Cool to room temperature with side sweep agitation.7. Perform a finishing step under the homogenizer.



7

SLIP & SLIDE



ZEMEA Propanediol 6.00

GRANHYDROGEL GA-CG Water & Glycerin & Glyceryl Polyacrylate & Caprylyl Glycol 12.00


GENTLEGUARD IQ* Water & Akebia Quinata Stem Extract & Algae Extract & Wine Extract & Lac-tobacillus Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

5.00

B GRANSIL SBG-11 Dimethicone & Polysilicone-11 & Butyrospermum Parkii (Shea) Butter 10.00

RITACANE IH Isohexadecane 5.00

MONOMULS 90-O 18 Glyceryl Oleate 3.50


STEARIC ACID 132 Stearic Acid 3.00

RITA SAFFLOWER SEED OIL Carthamus Tinctorius (Safflower) Seed Oil 2.50

PROTACHEM CS-50 Cetearyl Alcohol 1.00

C GRANPOWDER EDC-600 Divinyldimethicone/Dimethicone/Phenylsilsesquioxane Crosspolymer 1.00

Total 100.00

Procedure

1. Weigh Phase A the in main kettle equipped with a marine type propeller. Heat to 60-65C. Mix until uniform.

2. Weigh Phase B in side kettle. Heat to 60-65C. Mix until uniform.3. When both phases are at the proper temperature, add phase B to Phase A. Mix for 10-15 min.4. Add Phase C to AB. Mix until uniform.5. Cool batch to room temperature using side sweep agitation.



8

INFINITY SERUM



GRANHYDROGEL GA-CG Water & Glycerin & Glyceryl Polyacrylate & Caprylyl Glycol 15.00

GRANPOWDER QSC Polymethylsilsesquioxane/Silica Crosspolymer 5.00


DERMAFORCE IQ* Water & Cucumis Melo (Kiwano Melon) Fruit Extract & Lepidium Meyenii (Maca) Root Extract & Camellia Sinensis Leaf Extract & Lactobacillus Ferment Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

3.00

DERMASPRING IQ* Water & Prunus Lannesiana (Cherry Blossom) Flower Extract & Akebia Quinata Stem Extract & Myrica Rubra (Yumberry) Fruit Extract & Lactobacillus Ferment Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

3.00





B DIMETHICONE, 5 CST Dimethicone 1.50

DERMOL 99 Isononyl Isononanoate 2.50



GRANSIL SIW-038 Dimethicone & Polysilicone-11 & Butyrospermum Parkii (Shea) Butter & Water & Glycerin & Decyl Glucoside

10.00


Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a homogenizer. Heat to 60-65C.2. Weigh Phase B in a side kettle equipped with a marine type propeller. Heat to 70-75C.3. When both phases are at the proper temperature, add Phase B to Phase A. Mix for 15 to 20 minutes.4. Cool to room temperature using side sweep agitation.



9

BACK-2-BASICS: ROYAL TEA MINERAL SPF~25






1.00

PLANTAREN 2000 N Decyl Glucoside 0.50

KELTROL CG-F Xanthan Gum 0.35

NATROSOL 250 HHR Hydroxyethylcellulose 0.35


B OLIVEM 1000 Cetearyl Olivate & Sorbitan Olivate 3.50

EMULGADE PL 68/50 Cetearyl Glucoside & Cetearyl Alcohol 2.00

PHYTOLANE LS Olive Squalane 3.00



GRANRESIN PMSQ-ID Polymethylsilsesquioxane & Isododecane 3.00


C UV CUT TIO2-55-CG Titanium Dioxide & Caprylic/Capric Triglyceride & Stearic Acid & Alumina & Polyhydroxystearic Acid

10.00

UV CUT ZNO-68-CG Zinc Oxide & Caprylic/Capric Triglyceride & Polyhydroxystearic Acid 11.50

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with homogenizer. Mix well until Keltrol and Natrosol are dispersed.

2. Heat Phase A to 70-75C.3. Weigh Phase B in a side kettle equipped with propeller mixer. Heat to 70-75C.4. When at proper temperature, add Phase B to Phase A. Mix for 10-15 minutes.5. Add Phase C to Phase AB. Mix for 5-10 minutes.6. Cool to room temperature using side sweep agitation.



10

ZINC LOTION SPF~40




GEOGARD ECT Benzyl Alcohol & Salicylic Acid & Glycerin & Sorbic Acid 1.00

YOUTH 360 BCR* Water & Boswellia Serrata Extract & Centella Asiatica Extract & Betula Alba Bark Extract & Polygonum Cuspidatum Root Extract & Phenoxyethanol & Sodium Benzoate

3.00

ANTIFOAM AF EMULSION Simethicone 0.10



B FINSOLV TN C12-15 Alkyl Benzoate 3.00

CETIOL LC Coco-Caprylate/Caprate 3.00

PROTACHEM OP Ethylhexyl Palmitate 3.00

GRANSURF PG-14 Polyglyceryl-6 Polyricinoleate & Polyglyceryl-10 Dioleate 8.00


ALCOLEC BS Lecithin 1.00

BENTONE GEL ISD V Isododecane & Disteardimonium Hectorite & Propylene Carbonate 7.00


10.00

GRANRESIN MQI-T50 Isododecane & Polymethylsilsesquioxane/Trimethylsiloxysilicate 10.00

SYNCROWAX HGLC C18-36 Acid Triglyceride 1.50


Total 100.00

Procedure

1. Weigh Phase B in the main kettle equipped with homogenizer. Heat to 80-85 C. Mix well.2. Weigh Phase A in a side kettle equipped with a marine type propeller. Heat to 70-75 C and mix well.3. When both Phase A and Phase B are at proper temperature, add Phase A to Phase B under the

homogenizer. Mix for 45 minutes while maintaining the temperature at 80-85 C.4. Cool to room temperature using side sweep agitation.



11

ZNO UV STICK SPF~40


A ISOPROPYL PALMITATE Isopropyl Palmitate 3.00

PROTACHEM OP Ethylhexyl Palmitate 5.00


Polyethylene 13.00

FINSOLV TN C12-15 Alkyl Benzoate 10.00



GRANSIL PM-56-2X Phenyl Trimethicone 2.00


OZOKERITE WAX 77W Ozokerite 5.00



GRANSIL 530 Dimethicone 1.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a marine type propeller. Heat to 85-90C.2. Mix for 20 minutes at temperature. Pour samples at 80-85C.

G61386-3130.01


12

CHAMOCADO TREATMENT



CHAMOMILE TEA EXTRACT* Water & Chamomilla Recutita Extract & Hydroxyacetophenone & Sodium Ben-zoate & 1,2-Hexanediol & Caprylyl Glycol

5.00


5.00



JEECIDE CAP Caprylyl Glycol 0.80



B AVOCADO OIL Persea Gratissima (Avocado) Oil 5.00

PROTACHEM CTG Caprylic/Capric Triglyceride 4.00

PROTACHEM CS-70 Cetearyl Alcohol 3.00

STEARIC ACID 132 Stearic Acid 3.00


KAOLIN 2747 Kaolin 1.00


ARISTOFLEX AVC Ammonium Acryloyldimethyltaurate/VP Copolymer 0.20

CAPMUL GMS-50K Glyceryl Stearate 2.50

BEESWAX Beeswax 2.00

C GRANSIL SIW-038 Dimethicone & Polysilicone-11 & Butyrospermum Parkii (Shea) Butter & Water & Glycerin & Decyl Glucoside

20.00

D FD&C BLUE NO. 1, 1% AQ. SOL. Water & Blue 1 0.01

Total 100.00

Procedure

1. Combine Phase A in the main kettle equipped with homogenizer. Heat to 80-85C. Mix until uniform.2. Combine Phase B in a side kettle equipped with marine type propeller. Heat to 90-95C. Mix until uniform.3. When at proper temperature add Phase B to the main kettle. Mix for 15-20 minutes. 4. Add Phase C to the main kettle. Mix until uniform.5. Switch to side sweep agitation. 6. Add Phase D to the main kettle. Mix until uniform.7. Cool batch to room temperature.



13

BLUEBERRY BUTTERCREAM




ELASTIFLEX IQ* Water & Boswellia Serrata Extract & Centella Asiatica Extract & Camellia Sinensis (Purple Tea) Leaf Extract & Lactobacillus Ferment & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

5.00

CARBOPOL AQUA SF-1 POLYMER Acrylates Copolymer 5.00


POLYSORBATE 20 Polysorbate 20 2.00

COCO-COMPLETE BCR* Water & Coconut Alkanes & Dicaprylyl Ether & Glycerin & Cocos Nucifera (Co-conut) Oil & Propanediol & Olive Squalane & Cocos Nucifera (Coconut) Water & Cocos Nucifera (Coconut) Fruit Juice & Coco-Caprylate/Caprate & Lecithin (from Sunflower) & Sodium Hyalu

7.50

GRANHYDROGEL O-NP Water & Glycerin & Glyceryl Polyacrylate & PVM/MA Copolymer & Phenoxy-ethanol & Ethylhexylglycerin

7.00

ALCOHOL DENATURED Alcohol Denat. 2.00


FD&C BLUE NO. 1, 1% AQ. SOL. Water & Blue 1 0.10

B GRANSURF 50C-HM Dimethicone & PEG/PPG-18/18 Dimethicone 2.00

GRANSURF 67 PEG-10 Dimethicone 2.00



AVOCADO OIL Persea Gratissima (Avocado) Oil 4.00

FLORAESTERS IPJ Isopropyl Jojobate & Jojoba Alcohol & Jojoba Esters 4.00


ISODODECANE Isododecane 5.00


GRANSIL EP-LS Polysilicone-11 & Laureth-12 3.00

C BLUEBERRY FRAGRANCE ORC1800449

Fragrance 0.10

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a marine type propeller. Mix until uniform.2. Weigh Phase B in a side kettle. Mix and heat to 65-70C.3. Add Phase B to Phase A. Mix until uniform.4. Add Phase C to Phase AB. Mix until uniform.



14

SNOW MASK





DERMAFORCE IQ* Water & Cucumis Melo (Kiwano Melon) Fruit Extract & Lepidium Meyenii (Maca) Root Extract & Camellia Sinensis Leaf Extract & Lactobacillus Ferment Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

2.00

HEALING HIVE BCR* Water & Honey (White) Extract & Phenoxyethanol & Sodium Benzoate 2.00


PLURACARE E 400 PEG-8 4.00


B VANATURAL XGB Bentonite & Xanthan Gum 2.00

C GRANPOWDER EDC-600 Divinyldimethicone/Dimethicone/Phenylsilsesquioxane Crosspolymer 10.00

MIYOSYN FINE-ALT Fluorphlogopite & Triethoxycaprylylsilane & Aluminum Hydroxide 3.00




LANETTE 22 Behenyl Alcohol 4.00

TIMIRON ARCTIC SILVER Mica & Titanium Dioxide (CI 77891) & Silica 1.00

D GRANSIL SUG C13-15 Alkane & Stearoxymethicone/Dimethicone Copolymer 8.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with homogenizer.2. Add Phase B to Phase A and mix until uniform. Then heat to 70-75 C.3. Weigh Phase C in a side kettle equipped with side sweep agitation. Mix well and heat to 70-75 C.4. When Phase AB and Phase C are at proper temperature, add Phase C to Phase AB.

Mix for 10-15 minutes.5. Add Phase D to Phase ABC. Mix until uniform. 6. Cool to room temperature using side sweep agitation.



15

ILLUMINATING PRIMER BALM


A DIMETHICONE, 5 CST Dimethicone 28.40




CERESIN WAX WHITE 101 Ceresin 2.00

MICROCRYSTALLINE WAX 190/195

Microcrystalline Wax 1.00


Polyethylene 3.00


GRANSURF 50C-HM Dimethicone & PEG/PPG-18/18 Dimethicone 3.00

SB-700 Silica 3.00

GRANSIL VX-418 Bis-Stearyl Dimethicone 5.00

DUOCROME YR Mica & Titanium Dioxide (CI 77891) & Iron Oxides (CI 77492) 0.50

TIMIRON SUPER RED Mica & Titanium Dioxide (CI 77891) 1.00

B ELASTIFLEX IQ* Water & Boswellia Serrata Extract & Centella Asiatica Extract & Camellia Sinensis (Purple Tea) Leaf Extract & Lactobacillus Ferment & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

5.00



LEXGARD NATURAL Glyceryl Caprylate & Glyceryl Undecylenate 1.00

GRANSIL BLUR-X60 Polysilicone-11 & Water & Potassium Sorbate & Barium Sulfate & Sodium Carbonate & Laureth-12 & Phenoxyethanol & Ethylhexylglycerin

20.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a homogenizer. Heat to 80-85C.2. Weigh Phase B in a side kettle equipped with a marine type propeller. Heat to 60-65C.3. When both phases are at the proper temperature, add Phase B to Phase A. Mix for 15-20 minutes.4. Pour samples at 70-75C.



16

LUXURY FOUNDATION






2.00



SODIUM CHLORIDE Sodium Chloride 0.50

B GRANSURF PG-14 Polyglyceryl-6 Polyricinoleate & Polyglyceryl-10 Dioleate 5.00


GRANSIL VX-418 Bis-Stearyl Dimethicone 5.00

GRANSURF 90 Cetyl PEG/PPG-10/1 Dimethicone 3.00


NET-WO NS Disteardimonium Hectorite & Polyglyceryl-2 Isostearate & Polyglyceryl-6 Polyricinoleate

5.00



GRANRESIN MQD-2450 Dimethicone & C24-28 Alkyldimethylsiloxy Trimethylsiloxysilicate 8.00


C SILVER 2800 Mica 4.45

ALT-WHITE TSR Titanium Dioxide (CI 77891) & Aluminum Hydroxide & Triethoxycaprylylsilane 8.00

ALT-Y-339001 Iron Oxides (CI 77492) & Triethoxycaprylylsilane 1.30

ALT-R-338001 Iron Oxides (CI 77491) & Triethoxycaprylylsilane 0.20

ALT-B-337001 Iron Oxides (CI 77499) & Triethoxycaprylylsilane 0.05

Total 100.00

Procedure

1. Weigh Phase A in a side kettle equipped with a marine type propeller. Heat to 70-75C.2. Weigh Phase B in the main kettle equipped with a homogenizer. Heat to 75-80C.3. Micro-pulverize Phase C. Add to Phase B. Mix until uniform.4. When both phases are at the proper temperature, add Phase A to Phase BC. Mix for 15-20 minutes.5. Cool batch to room temperature using side sweep agitation.



17

NATURAL LITE COVERAGE FOUNDATION


A DEIONIZED WATER Glycerin 16.20

GLYCERIN Water 2.00


RESURGENT POWER BCR* Water & Rhodiola Rosea (Arctic Root) Extract & Eleutherococcus Senticosus (Siberian Ginseng) Root Extract & Rhaponticum Carthamoides (Maral) Root Extract & Inonotus Obliquus (Mushroom) Extract & Selaginella Lepidophylla Extract & Phenoxyethanol & Sodium Benzoate

2.00

SOLAGUM AX Acacia Senegal Gum & Xanthan Gum 1.00

JEECIDE CAP-5 Phenoxyethanol & Caprylyl Glycol & Potassium Sorbate & Water & Hexylene Glycol

1.00

B GRANSIL OGH Undecane & Tridecane & Polysilicone-11 10.00



GRANRESIN PMSQ-VL Polymethylsilsesquioxane & Coconut Alkanes 6.25







C SILVER 2800 Mica 11.00

RON TI-12 Titanium Dioxide (CI 77891) 7.00

SUNCROMA YELLOW IRON OXIDE, 8073

Iron Oxides (CI 77492) 1.50

SUNCROMA RED IRON OXIDE, 3080

Iron Oxide (CI 77491) 0.40

SUNCROMA BLACK IRON OXIDE, C33-134

Iron Oxides (CI 77499) 0.10

Total 100.00

Procedure

1. Weigh Phase A in a side kettle equipped with a propeller mixer. Disperse gum then heat to 60-65C.2. Weigh Phase B in the main kettle equipped with homogenizer. Mix and heat to 60-65C.3. Micro-pulverize Phase C, add to Phase B. Mix until uniform.4. When Phase A and Phase BC are at proper temperature, add Phase A to Phase BC. Mix for

10-15 minutes.5. Cool to room temperature using side sweep agitation.



18

SPFOUNDATION ~20


A DEIONIZED WATER Water 9.14BUTYLENE GLYCOL Butylene Glycol 5.00SODIUM CHLORIDE Sodium Chloride 1.50DISODIUM EDTA Disodium EDTA 0.05EUXYL PE 9010 Phenoxyethanol & Ethylhexylglycerin 1.00BIOWAVE BCR* Water & Propanediol & Polyglutamic Acid & Phenoxyethanol 1.50SODIUM HYDROXIDE, 25% AQ. SOL.

Water & Sodium Hydroxide 1.06

B GRANSIL PM-56-2X Phenyl Trimethicone 5.00JEECHEM CTG Caprylic/Capric Triglyceride 2.25VEGELIGHT 1214LC Coconut Alkanes & Coco-Caprylate/Caprate 3.00

GRANSURF W9 Cetyl PEG/PPG-10/1 Dimethicone & Hexyl Laurate & Polyglyceryl-4 Isostearate 4.00SOFTISAN 649 Bis-Diglyceryl Polyacyladipate-2 1.00GRANRESIN MQD-2450 Dimethicone & C24-28 Alkyldimethylsiloxy Trimethylsiloxysilicate 5.00

GRANSIL PSQ Polymethylsilsesquioxane 5.00STEARIC ACID 132 Stearic Acid 2.00GRANSIL SIW-050 Isododecane & Dimethicone & Polysilicone-11 & Coco-Caprylate/Caprate &

Water & Butylene Glycol & Decyl Glucoside9.00

GRANSURF 67 PEG-10 Dimethicone 2.70BENTONE 38V Disteardimonium Hectorite 0.80VITAMIN E ACETATE Tocopheryl Acetate 0.50ALCOLEC BS Lecithin 2.00LAMEFORM TGI Polyglyceryl-3 Diisostearate 1.50

C SILVER 2800 Mica 3.05RON TI-12 Titanium Dioxide (CI 77891) 10.00ALT-Y-339001 Iron Oxides (CI 77492) & Triethoxycaprylylsilane 1.50ALT-R-338001 Iron Oxides (CI 77491) & Triethoxycaprylylsilane 0.30ALT-BLACK NH Iron Oxides (CI 77499) & Triethoxycaprylylsilane 0.15

D UV CUT TIO2-41-DM Titanium Dioxide & Dimethicone & Hexyl Laurate & PEG-10 Dimethicone & Polyglyceryl-4 Isostearate & Stearic Acid & Alumina

12.00

UV CUT ZNO-61-DM Zinc Oxide & Dimethicone & PEG-10 Dimethicone 10.00

Total 100.00

Procedure

1. Weigh Phase B in the main kettle equipped with homogenizer. Heat to 70-75C.2. Weigh Phase A in a side kettle equipped with a marine type propeller. Heat to 65-70C.3. Micro-pulverize Phase C. Add to Phase B. Mix until uniform. 4. When at proper temperature, add Phase A to Phase BC. Mix for 15 to 20 minutes.5. Add Phase D to Phase ABC. Mix until uniform.6. Cool to room temperature using side sweep agitation.



19

INSTAGLAM CONCEALER


A DEIONIZED WATER Water 15.30BUTYLENE GLYCOL Butylene Glycol 5.00GLYCERIN Glycerin 3.00DERMASPRING IQ* Water & Prunus Lannesiana (Cherry Blossom) Flower Extract & Akebia Quinata

Stem Extract & Myrica Rubra (Yumberry) Fruit Extract & Lactobacillus Ferment Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

2.00

LEXGARD NATURAL Glyceryl Caprylate & Glyceryl Undecylenate 1.00B NATROSOL 250 HHR Hydroxyethylcellulose 0.35C GRANSIL PSQ Polymethylsilsesquioxane 5.00

DRY FLO PC Aluminum Starch Octenylsuccinate 1.00SILVER 2800 Mica 5.00


15.00

BENTONE GEL ISD V Isododecane & Disteardimonium Hectorite & Propylene Carbonate 7.00JEECHEM CTG Caprylic/Capric Triglyceride 3.00



ALCOLEC BS Lecithin 0.75RITA SAFFLOWER SEED OIL Carthamus Tinctorius (Safflower) Seed Oil 2.00

GRANRESIN PMSQ FLUID Polymethylsilsesquioxane & Dimethicone 10.00

D SILVER 2800 Mica 2.40ACT96-TRI-77891 Titanium Dioxide (CI 77891) & Aluminum Dimyristate &

Triethoxycaprylylsilane & Disodium Stearoyl Glutamate15.00

ACT96-Y-77492 Iron Oxide (CI 77492) & Aluminum Dimyristate & Triethoxycaprylylsilane & Disodium Stearoyl Glutamate

0.80

ACT96-R-77491 Iron Oxide (CI 77491) & Aluminum Dimyristate & Triethoxycaprylylsilane & Disodium Stearoyl Glutamate

0.30

ACT96-B-77499 Iron Oxide (CI 77499) & Aluminum Dimyristate & Triethoxycaprylylsilane & Disodium Stearoyl Glutamate

0.10

Total 100.00

Procedure

1. Weigh Phase A in a side kettle equipped with a marine type propeller. 2. Sprinkle in Phase B. Once dispersed, heat to 70-75C.3. Weigh Phase C in the main kettle equipped with a homogenizer. Heat to 75-80C.4. Micro-pulverize Phase D. Add to Phase C. Mix until uniform. 5. When both phases are at the proper temperature, add Phase AB to Phase CD. Mix for 15-20 minutes.6. Cool batch to room temperature using side sweep agitation.



20

BROWOW STICK


A DIMETHICONE, 5 CST Dimethicone 10.00


ISOPROPYL PALMITATE Isopropyl Palmitate 5.00


CARNAUBA WAX Copernica Cerifera (Carnauba) Wax 5.00


Polyethylene 8.00

GRANRESIN PMSQ-ID Polymethylsilsesquioxane & Isododecane 20.00



B SILVER 2800 Mica 15.00

ALT-WHITE TSR Titanium Dioxide (CI 77891) & Aluminum Hydroxide & Triethoxycaprylylsilane 5.00

ALT-Y-339001 Iron Oxides (CI 77492) & Triethoxycaprylylsilane 2.00

ALT-R-338001 Iron Oxides (CI 77491) & Triethoxycaprylylsilane 1.50

ALT-B-337001 Iron Oxides (CI 77499) & Triethoxycaprylylsilane 3.50

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a marine type propeller. Heat to 80-85C.2. Micro-pulverize Phase B. Add to Phase A. Mix until uniform.3. Pour samples at 80C.

G61297-353.01


21

SHIMMER MANIA MOUSSE SHADOW




GENTLEGUARD IQ* Water & Akebia Quinata Stem Extract & Algae Extract & Wine Extract & Lac-tobacillus Lysate & Saccharomyces Lysate & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

2.00



B GENUVISCO CARRAGEENEN CG-131

Carrageenan Gum 2.00

C GRANSIL DMG-3 Dimethicone & Polysilicone-11 15.00


GRANSIL PM-56-2X Phenyl Trimethicone 1.00




GRANRESIN MQI-T50 Isododecane & Polymethylsilsesquioxane/Trimethylsiloxysilicate 9.00


DRY FLO PC Aluminum Starch Octenylsuccinate 2.00

WHITE BEESWAX NF Beeswax 7.00

D COLORONA BRONZE Mica & Iron Oxides (CI 77491) 10.00

COLORONA BLACKSTAR GOLD Mica & Iron Oxides (CI 77499) 6.00

Total 100.00

Procedure

1. Weigh Phase A in a side kettle equipped with a marine type propeller. Sprinkle in Phase B.2. Once dispersed, heat Phase AB to 60-65C.3. Weigh Phase C in the main kettle equipped with a homogenizer. Heat to 70-75C.4. When both phases are at the proper temperature, add Phase AB to Phase C. Mix for 10-15 minutes.5. Add Phase D sequentially to Phase ABC. Mix until uniform.6. Switch to side sweep agitation and cool to room temperature.



22

ELECTRIFYING LIQUID EYELINER




GRANHYDROSIL PSQ-W-GL (NP)

Glycerin & Polymethylsilsesquioxane & Water & Phenoxyethanol & Ethylhexylglycerin

5.00



B KELTROL CG-F Xanthan Gum 0.20

C GRANRESIN PMSQ-ID Polymethylsilsesquioxane & Isododecane 10.00


GRANACRYSIL BMAS Isododecane & Isobutylmethacrylate/Bis-Hydroxypropyl Dimethicone Acrylate Copolymer

5.00

GRANSIL GVL-LITE C9-12 Alkane & Polysilicone-11 5.00




AEROSIL 200 Silica 0.50

D RON TI-12 Titanium Dioxide (CI 77891) 8.00

SILVER 2800 Mica 3.00


UNIPURE BLUE LC 686 Ultramarines (CI 77007) & Silica 2.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a homogenizer. Sprinkle in Phase B.2. Once dispersed, heat Phase AB to 70-75C.3. Weigh Phase C in a side kettle equipped with a marine type propeller. Heat to 75-80C.4. Micro-pulverize Phase D. Add to Phase C.5. When both phases are at the proper temperature, add Phase CD to Phase AB. Mix for 15-20 minutes.6. Switch to side sweep agitation and cool to room temperature.

G61318-365.03


23

SHEA’S NUDE MATTE LIPSTICK


A CETIOL LC Coco-Caprylate/Caprate 17.00



Polyethylene 10.00

MICROCRYSTALLINE WAX 190/195

Microcrystalline Wax 3.00




COCONUT OIL Cocos Nucifera (Coconut) Oil 5.00


PHYTOLANE LS Olive Squalane 5.00

GRANRESIN MQD-2450 Dimethicone & C24-28 Alkyldimethylsiloxy Trimethylsiloxysilicate 10.00



TITANIUM DIOXIDE, 40% IN CASTOR OIL

Ricinus Communis Seed Oil & Titanium Dioxide (CI 77891) 10.00

YELLOW IRON OXIDE, 50% IN CASTOR OIL

Ricinus Communis Seed Oil & Iron Oxides (CI 77492) 7.15

RED IRON OXIDE, 25% IN CASTOR OIL

Ricinus Communis Seed Oil & Iron Oxide (CI 77491) 5.70

D&C RED NO. 28, 30% IN CASTOR OIL

Ricinus Communis Seed Oil & Red 28 0.90

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a marine type propeller. Heat to 85-90C. Mix until uniform.

2. Pour samples at 80-85C.

G61296-362.01


24

PUCKER UP METALLIC GLOSS



GRANHYDROGEL OS-5CS Water & Glycerin & Dimethicone & Glyceryl Polyacrylate & Polysilicone-11 & Polysorbate 80 & PVM/MA Copolymer & Phenoxyethanol & Ethylhexylglycerin

10.00

PLURACARE E 400 PEG-8 0.50




COCO-COMPLETE BCR* Water & Coconut Alkanes & Dicaprylyl Ether & Glycerin & Cocos Nucifera (Co-conut) Oil & Propanediol & Olive Squalane & Cocos Nucifera (Coconut) Water & Cocos Nucifera (Coconut) Fruit Juice & Coco-Caprylate/Caprate & Lecithin (from Sunflower) & Sodium Hyaluronate

5.00

KOH, 25% AQ. SOL. Water & Potassium Hydroxide 0.35

D&C RED NO. 33, 1% AQ. SOL. Water & Red 33 7.00

FD&C YELLOW NO. 5, 1% AQ. SOL.

Water & Yellow 5 4.00

B NATROSOL 250 HHR Hydroxyethylcellulose 0.30

AMPHISOL K Potassium Cetyl Phosphate 3.00

C GRANRESIN PHQ-FLUID Polyphenylsilsesquioxane/Trimethylsiloxysilicate & Dimethicone 16.00


COCONUT OIL Cocos Nucifera (Coconut) Oil 2.00

INDOPOL H-300 Polybutene 2.00





CHIONE ELECTRIC FUCHSIA SF90D

Synthetic Fluorphlogopite & Titanium Dioxide (CI 77891) & Iron Oxides (CI 77491) & Silica

3.00

COLORONA BORDEAUX Iron Oxides (CI 77491) & Mica 5.00

REFLECKS MULTIDIMENSIONS SWIRLING SWEETBERRY

Calcium Sodium Borosilicate & Silica & Titanium Dioxide (CI 77891) & Iron Oxides (CI 77491)

4.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a marine type propeller.2. Sprinkle in each ingredient of Phase B consecutively. Mix well until each addition is dispersed. Then, heat

to 70-75C.3. In a side kettle, weigh Phase C. Heat to 70-75C.4. When at the proper temperature, add Phase C to Phase AB. Mix well for 10-15 minutes.5. Cool to room temperature with side sweep agitation.



25

VELVET KUSH BLUSH


A GRANSIL SUG C13-15 Alkane & Stearoxymethicone/Dimethicone Copolymer 30.00





JOJOBA OIL Simmondsia Chinensis (Jojoba) Seed Oil 2.00

APRICOT KERNEL OIL Prunus Armeniaca (Apricot) Kernel Oil 2.00

GRANSIL EP-LS Polysilicone-11 & Laureth-12 5.00

GRANSURF PG-14 Polyglyceryl-6 Polyricinoleate & Polyglyceryl-10 Dioleate 6.00

BELLASIL CQ04 Silica 10.00

MATTE 150 MICA Mica 5.00


AEROSIL 200 Silica 0.20

JEENATE 3H Polyethylene 2.00

B TITANIUM DIOXIDE, 50% IN CASTOR OIL

Ricinus Communis Seed Oil & Titanium Dioxide (CI 77891) 3.50

RED IRON OXIDE, 25% IN CASTOR OIL

Ricinus Communis Seed Oil & Iron Oxide (CI 77491) 0.35

YELLOW IRON OXIDE, 50% IN CASTOR OIL

Ricinus Communis Seed Oil & Iron Oxides (CI 77492) 0.15

CELLINI CORAL 420CR40F Mica & Titanium Dioxide (CI 77891) & Red 40 Lake & Hydrogenated Polyiso-butene & Palmitic Acid

1.00

C JEECIDE CAP-5 Phenoxyethanol & Caprylyl Glycol & Potassium Sorbate & Water & Hexylene Glycol

1.00

HEMP-GL BT* Water & Glycerin & Cannabis Sativa Flower/Leaf/Stem Extract & Hydroxyacetophenone & Sodium Benzoate & 1,2-Hexanediol & Caprylyl Glycol

5.00



Total 100.00

Procedure

1. Combine Phase A in the main kettle equipped with marine type propeller. Heat to 90-95C. Mix until uniform.

2. Sequentially add Phase B to the main kettle. Mix until uniform.3. Combine Phase C in a side kettle. Heat to 80-85C. Mix until uniform.4. When at proper temperature add Phase C to the main kettle. Mix until uniform.5. Pour samples at 85-90C.



26

GLOWGETTER


A PERFORMALENE 400 POLYETHYLENE

Polyethylene 7.00


RITA SSO Helianthus Annuus (Sunflower) Seed Oil 2.00





GRANRESIN PHQ-FLUID Polyphenylsilsesquioxane/Trimethylsiloxysilicate & Dimethicone 12.00

JEECHEM CTG Caprylic/Capric Triglyceride 11.50



TIMIRON SYNBEAM GOLD Synthetic Fluorphlogopite & Titanium Dioxide (CI 77891) & Tin Oxide 5.00

TIMIRON SNOWFLAKE MP-99 Mica & Titanium Dioxide (CI 77891) 5.00

TIMIRON HALO WHITE Synthetic Fluorphlogopite & Titanium Dioxide (CI 77891) & Tin Oxide 5.00

Total 100.00

Procedure

1. Weigh Phase A in the main kettle equipped with a marine-type propeller.2. Heat to 80-85C. Mix well until uniform.3. Pour samples at 80C.

G61349-357.04


27


Documents

MAJOR SILICONE