Major Project Report Manual 2011-2012 Batch- Final Draft

8/3/2019 Major Project Report Manual 2011-2012 Batch- Final Draft

1/21

Page 1 of21

Formatted: Font: +Body (Calibri), 10 pt

Bannari Amman Institute of Technology(Autonomous Institution affiliated to Anna University of Technology, Coimbatore

Approved by AICTE, Accredited by NBA, New Delhi and NAAC with A Grade)

Sathyamangalam - 638 401

School of Management Studies

GUIDELINES AND MANUAL FOR

PREPARATION OF MAJOR PROJECT REPORT

2011-2012


2/21

Page 2 of21

BANNARI AMMAN INSTITUTE OF TECHNOLOGY(Autonomous Institution affiliated to Anna University of Technology, Coimbatore

Approved by AICTE, Accredited by NBA, New Delhi and NAAC with A Grade)SATHYAMANGALAM

SCHOOL OF MANAGEMENT STUDIES

10MB51 MAJOR PROJECT AND VIVA VOCE

GENERAL GUIDELINES FOR OBSERVANCE

1. Students shall take up the Project with all sincerity from 28-11-2011.2. Students are advised to send the joining report duly signed by the company supervisor to

the project supervisor on or before 5.12.2011. (Annexure V)

3. They shall be punctual in reporting to the organization every day. They shall observe thetimings (Check in / Checkout) as indicated by the organization.

4. They shall adhere to the instructions by the organization meticulously.5. They shall maintain perfect discipline and conduct themselves in a dignified way. They

shall uphold the traditions of our Institute. They shall not pick up quarrel or enter in to

any argument with the employees of the organization.6. They shall not cause any damage to the property of the organization while undertaking

the project.7. They shall spend the time in the organization usefully; concentrating on the project work

with utmost sincerity.8. It is proposed to pay a visit by the faculty to the organization while the student is pursuing

the project. Any adverse report received by our faculty from the organization will be

viewed seriously.9. They shall also get to know the significant achievements and milestones crossed, special

R & D efforts, specific management techniques for successful running of business etc.10.The specific problem taken for study for which the student would suggest solutions

should pertain to the area of their specialization. Thus study should enable the student to

gain insight into their area of specialization.11.They shall keep a record of what they have learnt (like a diary/log) on a day to day basis

and mail (by post) a report for each week on or before the next Tuesday to theproject supervisor in our department for his review, evaluation and feedback.

(Specimen format of the diary/log is furnished in the Annexure VII )

12.They shall obtain a satisfactory Project Completion Certificate and AttendanceCertificate from the head of the organization or any appropriate authority, certifying

that the Project work was undertaken by the student for the entire period allotted for thesame. Completion Certificate has to be included in the Project Report. (Specimen format

of Project Completion and Attendance Certificates are furnished in the Annexure II and

II-A )13.While undertaking the project the students should come for a mid review with the faculty

supervisor and update about the progress of their work. Two such reviews will beconducted. (1st review26.12.11 and 2

ndreview23.01.12)

14.Soon after completion of the project each student shall submit a record of work done,knowledge and exposure gained, in the form of a written report. Such written reportsshould be submitted during the commencement of VI Trimester (on or before 12.03.12).

It is for this reason; the students are advised to maintain a diary/log on a day to day basis,so that compilation of the project may not pose any problem. Once the weekly reports are

consolidated, preparation of the final report for submission would be easy.

15.Students are advised to be in the campus from 20th to 25th February 2012 forcompleting the rough draft.

16.Reopening date of college for VI trimester27.02.12.


3/21

Page 3 of21


A MANUAL FOR PREPARATION OF PROJECT REPORT

CONTENTS

1. PREAMBLE2. OBJECTIVES3. SELECTION OF PROJECT4. PROJECT PROPOSAL5. EVALUATION6. NUMBER OF COPIES TO BE SUBMITTED7. LENGTH OF PROJECT REPORT8. DESIGN AND ARRANGEMENT OF CONTENTS OF PROJECT REPORT9. PAGE DIMENSIONS AND MARGIN

10. MANUSCRIPT PREPARATION11. TYPING INSTRUCTIONS12. NUMBERING INSTRUCTIONS13. BINDING SPECIFICATIONS14. DATES TO REMEMBER

1. PREAMBLE:The manual is intended to provide broad guidelines to the candidates in the preparation of

project report. In general the project report shall present, in an organized and scholarlyfashion an account of original research work of the candidate leading to the discovery of

new facts or techniques or correlation of facts.

2. OBJECTIVESThe overall objective of the project work is to provide the students an opportunity for

gaining insight into the business scenario and to understand the real life problems faced

by the organizations.

3. SELECTION OF PROJECTCorporate Project / Academic Project

A project work need not necessarily be done in a business or industrial organization. The

students can also pursue a project work staying in the college by analyzing secondary

data. For pursuing such a project permission from the Head of the Department should be

obtained. The faculty supervisor will be able to help the student to select a suitable


4/21

Page 4 of21

problem. The students are advised to review the literature, which would not only provide

necessary insight to the problem but also ways and means of finding a solution.

4. PROJECT PROPOSALThe student has to prepare a tentative proposal along with the time schedule for

completing the various tasks. For example, the proposal should give a brief background

about the industry, company, product profile, global and domestic scenario, and

justification/need for the study, general and specific objectives, scope of the study,

tentative methodology covering details on sampling methods, sample size, data

requirements both primary and secondary data, data collection method and a rough draft

of the schedule/questionnaire. (See Annexure No: VI)

Approval of Proposal

After preparing the proposal, the student should have preliminary discussion with both

organizational supervisor and faculty supervisor and get the necessary approval for

proceeding further.

5. EVALUATIONPurpose

o To understand the experience and insight gained by the student on various aspectsof business.

o To know the individuals competency in conducting a research work.Components of Evaluation

Students shall note that the Project is subject to evaluation by the department. The student has to make presentation of his/her findings and recommendations to the

executives of the company if necessary.

The student must submit the project report along with the abstract / executivesummary to the Program Coordinator. The students should make a presentation to

the class and a faculty team on the project. A separate schedule would be put up for

the same. The scheme of evaluation is as follows;

S. No. Criteria Marks

1. a. Review 1 and 2 (50 marks each) 100

b. Continuous EvaluationIdentification of problem - 10 Marks

Literature Survey and Analysis - 15 Marks

Approach and Progress - 25 Marks

Findings Discussion and Conclusion - 25 Marks

Final Report Presentation - 25 Marks100

2. Final Examination (includes Report & Viva Voce) 200

Total 400


5/21

Page 5 of21

Hence the students shall prepare continuously to make a full fledged written report

besides preparing themselves for the viva voce.

6. NUMBER OF COPIES TO BE SUBMITTED:Students should submit four hard copies (it includes student and company copy) and one

soft copy in CD to the Director (SMS) on or before 12-03-2012. The CD should containentire project report, data base (like excel data sheet, SPSS data sheet, and other data

collected from the internet pertaining to the study and files pertaining to the analysis.More over if the data is collected through questionnaire, the filled in questionnaire

should also be submitted to the supervisor.

7. LENGTH OF PROJECT REPORT:The size of the project report should not exceed 100 pages of typed matter reckoned from

the first page of Chapter 1 to the last page. (Excluding Appendices)

8. DESIGN AND ARRANGEMENT OF CONTENTS OF PROJECT REPORT:DESIGN OF THE REPORT

Chapter

NoChapter Contents

Maximum

Number of Pages

a. Introduction-Introduction to the Title, Profile of Industry,Company, Problem Identification /Significance /Importance

of the Study, Objectives, Scope and Limitations.

20

b. Review of Literature-Minimum of 50 Related articles have tobe collected and 15 relevant articles should be finalized afterdiscussion with the faculty supervisor

10

c.

Research Methodologya. Research Designb. Sampling Design

i. Populationii. Sample Unit

iii. Sampling frameiv. Sample Sizev. Sampling Technique

c. Tools of analysis

15

d. Analysis and Interpretation 40e. Findings, Suggestion and Conclusion 15

Maximum number of pages 100

The sequence in which the project report material should be arranged and bounded is asfollows:

1. Title Page2. Bonafide Certificate3. Project Completion Certificate Issued by the Company4. Declaration5. Abstract


6/21

Page 6 of21

6. Acknowledgement7. Table of contents8. List of Tables9. List of Figures10.List of Symbols, Abbreviations or Nomenclature (optional)11.Chapters Introduction Review of Literature Research Methodology Analysis & Interpretation Findings, Suggestions and Conclusion

12.Appendices13.References / Bibliography

The Tables and Figures shall be introduced in the appropriate places.

9. PAGE DIMENSIONS AND MARGINThe dimensions of the final bound copies of the project report should be 11.5 and 8.2. Theproject report should be prepared in A4 sheet.The final four copies of the project report (at the time of submission) should have the

following page margins.

Top edge : 1

Bottom edge : 1

Left side : 1.5Right side : 1

Tables and Figures should conform to the margin specifications. Large size figure should bephotographically or otherwise reduced to the appropriate size before insertion.

10.MANUSCRIPT PREPARATIONThe candidate shall supply a typed copy of the manuscript to the Supervisor for the purpose

of approval. In the preparation of the manuscript, care should be taken to ensure that alltextual matter is typed to the extent possible in the same format as may be required for the

final project report.

Hence, some of the information required for the final typing of the project report is includedalso in this section. The headings of all items 2 to 13 listed under section 8 should be typed

in capital letters without punctuation and centered below the top edge of the margin. The text

should commence two line spaces below this heading. The page numbering for all items 1 to10 should be done using lower case Roman numerals (i,ii, iii, iv, ..) and the pages

thereafter should be numbered using Arabic numerals (1,2,3,.).

10.1 Title page A specimen copy of the title page for Project Report is given in

Annexure - I.

10.2 Project Completion Certificate A specimen copy of the Project CompletionCertificate to be issued by the company is given in AnnexureII.


7/21

Page 7 of21

10.3 Bonafide Certificate A specimen copy of the Bonafide Certificate is given in

Annexure - III.

10.4 DeclarationA specimen copy of the Declaration is given in AnnexureIV.

10.5 Abstract (Executive Summary) Abstract should be an essay type narrative, not

exceeding 600 words, outlining the problem, the methodology used for tackling itand a summary of the findings.

o It should include the objectives, methodology, key findings & suggestions of thestudy.

o It must be split across few paragraphs but not more than one page.10.6 AcknowledgementIt should be brief and should not exceed one page when typed

using double spacing. It should be written in first person and signed by the student.

Generally, it should contain

i. A word of thanks to Director, supervisor and other facultyii. Gratitude to people in the organization

iii. Appreciation to friends, family etc.

10.7 Table of Contents The table of contents should list the Title Page, Bonafide

Certificate, Project Completion Certificate and Declaration. Abstract andAcknowledgement will not find a place among the items listed in the table of

contents but the page numbers of which are in lower case Roman letters. Two linespacing should be adopted for typing the matter under this head.

10.8 List of TablesThe list should use exactly the same captions as they appear abovethe tables in the text. Two line spacing should be adopted for typing the matter under

this head.

10.9 List of FiguresThe list should use exactly the same captions as they appear belowthe figures in the text. Two line spacing should be adopted for typing the matter

under this head.

10.10 List of Symbols, Abbreviations or Nomenclature- Two line spacing should be

adopted for typing the matter under this head. Standard symbols, abbreviations etc.should be used.

10.11 ChaptersThe chapters may be broadly divided into 5 parts. (i) Introductory chapter,(ii) Review of Literature, (iii) Research Methodology, (iv) Analysis and

Interpretation (v) Findings, Suggestions & Conclusion.

Each chapter should give an appropriate division heading & subdivision heading.

Tables and Figures in a chapter should be placed in the immediate vicinity of thereferences where they are cited.

Footnotes should be used sparingly. They should be typed single space andplaced directly underneath in the same page which refers to the material theyannotate.


8/21

Page 8 of21

10.12 AppendicesAppendices are provided to give supplementary information, which if

included in the main text may serve as a distraction and cloud the central themeunder discussion.

Appendices should be numbered using Arabic numerals, e.g. Appendix 1,Appendix 2, etc.

Tables, Figures and References appearing in appendices should be numbered andreferred to at the appropriate places just as in the case of chapters.

10.13 List of References Any work of other researcher, if used either directly orindirectly, the origin of the material thus referred to should be indicated at

appropriate places in the project report. A paper, a monograph or a book may bedesignated by the name of the first author followed by the year of publication, placed

inside brackets should be indicated at the appropriate places in the project report. The

citation may assume any one of the following forms.

Examples of Citation:

1) An improved algorithm has been adopted in literature (Taych-ya 1980)2) Jankins and Whits (1968) have dealt with this principle at length.3) The problems of Simulation Method have been studied by Shin et. al (1984) and

certain limitation of the method used, has been pointed out by Shin et. al (1984).

The list should be typed twospaces below the heading REFERENCES in

alphabetic order, in single spacing, align text to both the margins. The referencematerial should be listed in the alphabetic order of the first author. The name of the

author / authors should be immediately followed by the year and other details. Atypical illustrative list is given below.

REFERENCES:

Journal Articles

Format:Author(s), (Year). Article title, Name of journal, Volume Number, Issue Number,Page Range.

Example:Chidambaram, M. and Malleswararao, Y. (2002). "Model Reference Control ofNonlinear Systems with Relative Order Two: Application to a Semi Batch Reactor",

Journal Proc. Cont., 2(1): 9-15.

Conference Proceedings

Format:Author(s), (Year). "Article title", Name of Conference, Location of Conference, PageRange.


9/21

Page 9 of21

Example:

Dore S.D., Perkins, J.D. and Kershenbaum, L.S. (2004). "Application of

Geometric Nonlinear Control in the Process Industries - a Case Study", Proc.

IFAC Symposium, ADCHEM '94, Kyoto, Japan, pp.501-506.

Books

Format:Author(s), (Year). Title of Book in Italics. Edition number, (Name of Publisher,Place of Publication) Pages.

Example:Truk,C. and Kirkman, J. (1996). Effective Writing - Improving Scientific,

Technical and Business Communication. (2nd

Edition, E & FN SPON, London)pp. 14-17.

Dissertations; Theses and Research Reports

Format:

Author(s), (Year). Title in Italics. Type of Publication, Research Group, Name ofInstitution, Country.

Example:

Peel, C. (2005). Aspects of Neural Networks for Modeling and Control. Ph.D.Thesis, University of Newcastle-upon-Tyne, UK.

Company Reports and Manuals

Format:Name of Company or Organization, (year), Title in Italics, Place of Publication.

Example:Mathsoft Inc., (2000), Mathcad 2000 Reference Manual. Cambridge, MA.

Information from the WWW

Format:Name of Author(s) or Company or Organization, (year),Title of Article, URL, DateFound.

Example:

Tham, M.T. (2007).Distillation: an Introduction,http://lorien.ncl.ac.uk/ming/distil/distil0.htm,30May 2001.

Personal Communications

Format:Name, (Year). Personal Communications, Affiliation of Named Person.


10/21

Page 10 of21

Example:

Blogg, J. (2006). Personal communication, University College London, UK.

Magazine Article

Format:Name, (Year, Month, Date). Title. Name of the Magazine Article, Volume

Number: Issue Number, Page Range.

Example:Pozo, E. R. (2008, November 19). Predicting the Way in which Capital MarketMoves. Capital Market Literature, 290, 1113-1120.

Encyclopedia Article

Format:

Name, (Year). Title, Name of the Encyclopedia article, Volume, Page Range,Place of Publication, Publisher Name.

Example:Parker, S.A. (2007). Capital Market Development. In International Encyclopedia

of Business and Finance (Vol. 7, pp. 202-207). New York: Aesculapius Publishers.

Newspaper Article

Format:Name (Year, Month, Date). Name of the Newspaper, Page Range.

Example:

Amazing women. (2005, January 12). The Journal News, pp. D11, D14.

Electronic Journal Article From a Database

Format:Name (Year). Name of the Journal Article, Volume: Issue No, Page Range, Nameof the Data Base.

Example:Tjader, J.W., Coltrane, J.A., & Taylor, A.A. (1995). A History of Mockery.American Psychologist, 50, 750-765. Retrieved from Psyc INFO database.

Electronic Journal Article (print version)

Format:Name (Year), Name of the Journal Article, name of the Journal, Volume No: IssueNo., Page Range.

Example:Rodriguez, G., Puente, S., & Mayfield , J. (2001). Role of Upbringing in Family

Attitudes. [Electronic version]. Journal of Family Research, 5, 117-123.


11/21

Page 11 of21

10.14 Tables and FiguresBy the word Table is meant tabulated data in the body of the

project report as well as in the appendices. All other material used in the body of theproject report and appendices such as charts, graphs, maps, photographs and

diagrams may be designated as Figures.

A table or figure including caption should be accommodated within theprescribed margin limits and appear on the page following the page where their

first references is made.

Tables and figures on half-page or less in length may appear on the same pagealong with the text. However, they should be separated from the text both above

and below by double line spacing.

All tables and figures should be prepared on the same paper or material used forthe preparation of the rest of the project report.

Two or more small tables or figures may be grouped if necessary in a single page.

Photographs, if any should be included in the color Xerox form only. More thanone photograph can be included in a page.

Table title should be placed on the top of the table. Title and Table should be aligned centre. Table head note should be aligned right and the font (10) should be in bold. Table foot note should be aligned left and the font (10) should be in bold. Table text should be aligned left. The usage of numbers in the table should be center aligned / amount in the table

should be right aligned.

Table should fit to window. Output from SPSS should not be copied directly but required to be as per table

text format.

Source of the Table should be given immediately underneath of the table, ifapplicable.

Figure title should be placed underneath of the figure. Figure title and Figure should be Center aligned. Legend of the Figure should be bottom and right aligned.

11.TYPING INSTRUCTIONS11.1 General

This section includes additional information for final typing of the project report.

Some information given earlier under Manuscript Preparation shall also bereferred. The impression on the typed copies should be black in Colour.

The font size: 12 point TIMES NEW ROMAN with bold letters wherever

necessary shall be used to have uniformity of the project report. A sub-heading at thebottom of a page must have at least two full lines below it or else it should be carried

over to the next page. The last word of any page should not be split using a hyphen.One and half spacing should be used for typing the general text.

Single spacing should be used for typing

Formatted: Font: Bold


12/21

Page 12 of21


i. Long Tablesii. Long Quotations

iii. Foot notesiv. Multiline captionsv. References

All quotations exceeding one line should be typed in an indented space the indentation

being 0.4 from either margin. Double line spacing should be used for typing the Bonafidecertificate and Acknowledgement.

11.2 ChaptersThe format for typing chapter headings, division headings and sub division headings are

explained through the following illustrative examples.

Chapter heading: CHAPTER I (Font Size 16 - Bold)INTRODUCTION

(Font Size 16 - Bold)

Division heading:1.1 OUTLINE OF PROJECT REPORT(Font Size-14 - Bold) Sub-division heading : 1.1.2 Problem Statement(Font Size 13 - Bold)The word CHAPTER without punctuation should be centered below the top edge of the

margin. One and half line spaces below, the title of the chapter should be typed centrally in

capital letters. The text should commence two line spaces below the title. The first letter ofthe text should be offset from the left hand margin by 0.5.

The division and sub-division captions along with their numberings should be left justified.

The typed material directly below division or sub-division heading should commence one

and half line spaces below it and should be offset 0.5 from the left hand margin. Within adivision or sub-divisions, paragraphs are permitted. Every paragraph should commence two

line spaces below the last line of the preceding paragraph, the first letter in the paragraphbeing offset from the left hand margin by 0.5.

12.NUMBERING INSTRUCTIONS12.1 Page NumberingAll page numbers (whether it is in Roman or Arabic numbers) should be typed withoutpunctuation at the bottom of the page and aligned center. The preliminary pages of the

project report (such as Title page, Acknowledgement, Table of contents etc.) should be

numbered in lower case Roman numerals. The title page will be numbered as i" but thisshould not be typed. The page immediately following the title page shall be numbered iiand it should appear at the bottom aligned center. Pages of main text, starting with chapter 1

should be consecutively numbered using Arabic numerals.

12.2 Numbering of Chapters, Divisions and Sub DivisionsThe numbering of chapters, divisions and sub-divisions should be done using Arabicnumerals only and further decimal notation should be used for numbering the divisions and

sub-divisions within a chapter. For example, sub-division 4 under division 3 belonging to

chapter 2 should be numbered as 2.3.4. The caption for the sub-division should be


13/21

Page 13 of21

immediately following the number assigned to it. Every chapter beginning with the first

chapter should be serially numbered using Arabic numerals. Appendices included shouldalso be numbered in an identical manner starting with Appendix 1. Do not number the sub

divisions beyond 2 decimals (For ex. 2.1.2 and not 2.1.2.1)

12.3 Numbering of Tables and FiguresTables and Figures appearing anywhere in the project report should bear proximate numbers.

The rule for assigning such numbers is illustrated through an example. If a figure in chapter3 happens to be the fourth, then assign 3.4 to that figure. Identical rules apply for tables

except that the word Figure is replaced by the word Table. If figures (or tables) appear inappendices then figure 3 in Appendix-2 will be designated as Figure A.2.3. If a table is

continued into the next page, it should be drawn underneath an unfinished table. The top line

of the table continued into the next page should, for example read Table 2.1 (continued)placed centrally and underlined.

12.4 Numbering of EquationsEquations appearing in each chapter or Appendix should be numbered serially, thenumbering commencing afresh for each chapter or Appendix. Thus for example, an equation

appearing in chapter 2, if it happens to be the eighth equation in that chapter should be

numbered (2.8) thus

C(s) G1G2= ..(2.8)

R(s) 1 + G1G2H

While referring to this equation in the body of the project report, it should be referred to as

the Equation (2.8).

13.BINDING SPECIFICATIONSProject report should be bound using flexible cover of thick white art paper. The spine for

the bound volume should be of black calico of0.75 width. The cover should be printed in

black letters and the text for printing should be identical to what has been prescribed for thetitle page.

14.DATES TO REMEMBERS. No Description Date

1. Date of finalizing the company 11.11.20112. Date of joining 28.11.20113. Joining Report, research topic and problem 05.12.20114. Preliminary Research Design Discussion with Supervisors 17.12.20115. First Review(Research DesignReport Form to be submitted) 26.12.20116. Second Review(Data Collection to be completed) 23.01.20127. Rough Draft Preparation 20th to 25th Feb 20128. Reopening date of college for VI trimester and Rough Draft

Submission27.02.2012

9. Final report 12.03.2012


14/21

Page 14 of 21

Annexure I(A typical specimen of Title Page)

PERFORMANCE EVALUATION OF SELECTEDEQUITY FUNDS IN INDIA

By

(NAME OF CANDIDATE)

Reg.No

of

Bannari Amman Institute of Technology(Autonomous Institution affiliated to Anna University of Technology, Coimbatore



UNDER THE SUPERVISION OF

(Supervisor Name)

A PROJECT REPORTSubmitted to the

School of Management Studies

In partial fulfillment of the requirements

for the award of degree of

MASTER OF BUSINESS ADMINISTRATION

of

ANNA UNIVERSITY OF TECHNOLOGY, COIMBATORE

MARCH 2012


15/21

Page 15 of21

Annexure II

Name of the CompanyAddress

Project Completion Certificate

This is tocertify that Mr. / Ms. Name of the Student (Roll No.), II MBA of the School of

Management Studies, Bannari Amman Institute of Technology, Sathyamangalam 638401

has done a Major Project titled Project Title from November 2011 to February 2012 in our

organization in partial fulfillment of the requirements for the award of degree of Master of

Business Administration.

Authorized Signatory with seal and date

Note: Project Completion Certificate should be in companys letter head


16/21

Page 16 of21

Annexure II-A

Name of the CompanyAddress

Attendance Certificate

This is to certify that Mr. / Ms. Name of the Student (Roll No.), I MBA of the School of

Management Studies, Bannari Amman Institute of Technology, Sathyamangalam 638401

has done a Major Project from 28th November 2011 to 18th February 2012 in our

organization. The percentage of attendance was ______ %

Authorized Signatory with seal and date

Note: Attendance Certificate should be in the companys letter head


17/21

Page 17 of21

Annexure III

BONAFIDE CERTIFICATE

Certified that this project report titled is the Bonafide work of

Mr./Ms,who carried out the research under my supervision.

Certified further, that to the best of my knowledge the work reported herein does not form a

part of any other project report or dissertation on the basis of which a degree or award was

conferred on an earlier occasion to this or any other candidate.

Signature of the Director (SMS) Signature of the Supervisor

Submitted for the End Trimester Examination (Viva-Voce) held on ---------------

Signature of the Internal Examiner Signature of the External Examiner

Place:

Date:


18/21

Page 18 of21

Annexure IV

DECLARATION

I, ________________ hereby declare that the thesis entitled TITLE OF THE PROJECT

submitted to the School of Management Studies, Bannari Amman Institute of Technology,

Sathyamangalam, in partial fulfillment of the requirements for the award of the Degree of

Master of Business Administration of Anna University of Technology, Coimbatore is a

record of original and independent research work done by me during the year 2011-2012

under the supervision and guidance of Supervisor Name, Designation, Bannari Amman

Institute of Technology, Sathyamangalam and it has not formed the basis for the award of any

Degree / Diploma / Associateship / Fellowship or other similar title to any candidate of any

University.

Signature of the Candidate.


19/21

Page 19 of21

Annexure V

BANNARI AMMAN INSTITUTE OF TECHNOLOGY

(Autonomous Institution affiliated to Anna University of Technology, Coimbatore



JOINING REPORT

Name of the Student :

Roll No. :

Date of Reporting :

Reporting Department and Person :

Organizational Supervisors name :

Address :

Telephone :

Fax No. :

Email :

Student Contact Address:

Telephone/ Mobile Number:

Email:

Topic:

Area of Research :

Signature of the Organizational Supervisor with seal and date Signature of the Candidate


20/21

Page 20 of 21

Annexure VI

BANNARI AMMAN INSTITUTE OF TECHNOLOGY(Autonomous Institution affiliated to Anna University of Technology, Coimbatore



RESEARCH DESIGNREPORT FORM

Name of the Student: Roll No: Need for the study : Scope of the study : Objectives : Research Design : Sampling Design : Population :

Sample Unit:

Sampling Frame :

Sample Size: Sampling Technique:

Type and Source of Data:

Tools of Analysis :

Questionnaire Design (if any) :

Signature of the Organizational Supervisor with Seal and Date Signature of the Candidate


21/21

Page 21 of21

Annexure VII

BANNARI AMMAN INSTITUTE OF TECHNOLOGY

(Autonomous Institution affiliated to Anna University of Technology, Coimbatore



DIARY/LOG

Name of the Student :

Name of the Supervisor:

Report No and Period:

DATE WORK UNDERTAKEN IN THE ORGANIZATION OTHERREMARKS IF ANY

Students Signature

Signature of the Organizational Supervisor with Seal and Date

Note: Mail (by post) a report (Diary / Log) for each week on or before the next Tuesday to the project

supervisor.

Documents

Major Project Report Manual 2011-2012 Batch- Final Draft