MAINTENANCE ACCESSORIES - Texas Industrial Rubber and

MAINTENANCE ACCESSORIES

294


295

Liquid and Stick Threadlockers

Loctite 222MS Low Strength/Small ScrewFasteners 1/4” (6mm) and smaller

Loctite 242 Medium StrengthFasteners between 1/4” and 3/4” (6 to 20 mm)

Loctite 243Medium Strength/Oil ResistantFasteners between 1/4” and 3/4” (6 to 20 mm)

Loctite 246Medium Strength/High TemperatureFasteners between 1/4” and 3/4” (6 to 20 mm)

Loctite 271High StrengthFasteners up to 1” (25 mm)

Loctite 272High Strength/High TemperatureBolts up to 1 1/2” (36 mm)

Loctite 277High StrengthFasteners up to 1 1/2” (36 mm)

Loctite 290Wicking GradeBolts up to 1/2” (12 mm)

Loctite 294Wicking Grade/High Temperature

Loctite 425 Assure Instant AdhesiveSurface Curing Threadlocker

Loctite 2432Low Halogen/Low Sulfur

Loctite 2440Primerless/Medium Strength

Loctite 2760Primerless/High Strength

Loctite 248 Threadlocker StickMedium Strength/Removeable/Blue

Loctite 268 Threadlocker StickHigh Strength/Red

Loctite 262Medium to High StrengthFasteners up to 3/4” (20 mm)

Loctite 266High Strength/High TemperatureFasteners up to 3/4” (20 mm)

Liquid Thread Sealants

Loctite 542Fine Threads

Loctite 545Hydraulic/Pneumatic Fittings

Loctite 554Refrigerant Sealant

Loctite 564General Purpose

Loctite 565 PSTControlled Strength

Loctite 567 PSTHigh Temperature

Loctite 572Low Strength

Loctite 577Coarse Threads

Loctite 579Instant Seal

Loctite 580 PSTLow Halogen/Low Sulfur

Loctite 592 PSTSlow Cure

Loctite 5772Low Halogen/Low Sulfur


296

Gasketing & Sealing Loctite® 510™ Gasket Eliminator® Flange SealantHigh temperature sealant specially engineered for making or dressing gaskets in rigid assemblies.

Loctite® Instant GasketHigh performance, leakproof gaskets in one minute.

Loctite® 5920™ CopperHigh Performance RTV Silicone Gasket Maker Withstands operating environments to 700°F (371 °C) intermittent. Superior oil resistance.

Loctite® 5699™ GreyHigh Performance RTV Silicone Gasket Maker5HPDLQV�ÀH[LEOH�DQG�ZLWKVWDQGV�KLJK�YLEUDWLRQ��'HVLJQHG�for high-torque applications.

Loctite®�6XSHUÀH[® Blue RTVSilicone Adhesive Sealant &XUHV�WR�D�WRXJK��ÀH[LEOH�UXEEHU��0DNHV�UHOLDEOH�³IRUPHG�in-place” gaskets that resist shrinking, cracking, and migrating. Coats pre-cut gaskets to increase reliability.

Loctite®�6XSHUÀH[® Red High Temp RTVSilicone Adhesive Sealant Resists temperatures to 600°F (315°C) intermittent.

Gasketing Anaerobic Loctite® 504™ Gasket Eliminator® Flange SealantGap FillingA single-component, instant, low pressure seal WKDW�¿OOV�JDSV�WR��´�

Loctite® 515™ Gasket Eliminator® Flange Sealant0DNHV�ÀH[LEOH�JDVNHWV�IRU�ULJLG�PDFKLQHG�ÀDQJHV�ZLWK�OHVV�WKDQ��´�JDS��)OH[HV�ZLWK�ÀDQJHV�WKDW�PRYH�LQ�service.

Loctite® 518™ Gasket Eliminator® Flange Sealant)RUPV�D�ÀH[LEOH��VROYHQW�UHVLVWDQW�VHDO�WKDW�ZLOO�QRW�WHDU�RU�GHFD\��6HDOV�WR��)�DQG�¿OOV�JDSV�WR��´��

Loctite® 518™ Gasket Eliminator® Flange SealantIdeal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock.

Loctite® Aviation Gasket Sealant7KLQ��EUXVKDEOH�GUHVVLQJ�VHDOHU�IRU�FORVH�¿WWLQJ�SDUWV��

Loctite® Gasket Sealant 1Reliable, paste-like gasket sealant/dressing/coating. Sets quickly to a hard set and is recommended for rigid, permanent assemblies.

Loctite® Gasket Sealant 2Reliable, paste-like gasket sealant/dressing/coating. Sets PRUH�VORZO\�WR�D�SOLDEOH�¿OP�EHVW�VXLWHG�IRU�QRQ�ULJLG��vibrating assemblies. Use to 400°F.

Loctite® 598” BlackHigh Performance RTV Silicone Gasket Maker5HWDLQV�KLJK�ÀH[LELOLW\�DQG�RLO�UHVLVWDQFH��

Loctite® 587™ BlueHigh Performance RTV Silicone Gasket Maker)RUPV�WRXJK��ÀH[LEOH�JDVNHWV�GLUHFWO\�RQ�WKH�ÀDQJH��2IIHUV�H[FHOOHQW�DGKHVLRQ�WR�RLO\�VXUIDFHV�

Loctite® 509™ Gasket Eliminator® Flange SealantFlexible:LWKVWDQGV�PLQRU�ÀDQJH�PRYHPHQWV�FDXVHG�E\�YLEUDWLRQV��It will not run when applied to vertical surfaces. Fluorescent blue properties allow easy visual inspection during assembly.

Loctite® 510™ Gasket Eliminator® Flange SealantHigh Temperature 7HPSHUDWXUH�UDQJH�WR��)�ZLWK�H[FHOOHQW�VROYHQW�DQG�chemical resistance. Makes or dresses gaskets in rigid assemblies. Eliminates gasket compression set.

Loctite® 5205™ Flange Sealant)DVW�FXULQJ�DQG�ÀH[LEOH��good sealing properties against oil and water/glycol particularly at high temperatures. High viscosity.


297

Loctite® C5-A® Copper Based Anti-Seize LubricantSuspends copper and graphite in a high quality grease. Protects against rust, corrosion, galling, and seizing at temperatures to 1800°F (982°C).

Loctite® C5-A® Copper Anti-Seize StickConvenient semi-solid stick form.

Loctite® Silver Grade Anti-Seize)RUWL¿HG�ZLWK�JUDSKLWH�DQG�PHWDOOLF�ÀDNH��,QHUW��ZLOO�QRW�HYDSRUDWH�RU�KDUGHQ�LQ�H[WUHPH�FROG�RU�KHDW��)RU�

Loctite® N-5000™ High Purity Anti-SeizeNickel-based. Lubricates Class 1, 2 and 3 power plant hardware. Recommended for highly corrosive environments to 2400°F (1315°C).

Loctite® High Performance N-5000™ High Purity Anti-SeizeNickel-based for Class 1, 2 and 3 power plant hardware. Temperature resistant to 2400°F (1315°C).

Loctite® N-7000™ High Purity Anti-SeizeMetal-free, for Class 1, 2 and 3 power plant hardware. Temperature resistant to 2400°F (1315°C).

Loctite® White Hi-Temp Anti-SeizeGeneral purpose non-metallic, protects against high temperature seizing and galling of mated metal parts, up to 2000°F (1093°C).

Loctite® Marine Grade Anti-Seize3URWHFWV�DVVHPEOLHV�H[SRVHG�GLUHFWO\�or indirectly to fresh and salt water, in temperatures from -20°F to 2400°F (-29°C to 1315°C).

Loctite® Graphite-50™ Anti-SeizeElectrically conductive, non-metallic. Temperature resistant up to 900°F (482°C).

Loctite® Moly-50™ Anti-SeizeGeneral purpose thread lubricant. Meets performance requirements of MIL-PRF-83483

Loctite® Zinc Anti-SeizeProtects aluminum and ferrous surfaces from seizure and corrosion up to 750°F (400°C).

Loctite® Food Grade Anti-SeizePrevents seizure, galling, and friction in stainless steel and other metal parts up to 750°F (400°C). Approved for incidental food contact.

Loctite® N-1000™ High Purity Anti-Seize&HUWL¿HG�SXUH��&RSSHU�EDVHG��Suitable for critical, long-term, stainless steel applications and high-nickel, alloy bolting.

Anti-Seize

use in assemblies up to 1600°F (871°C).

Loctite® Silver Grade Anti-Seize StickSemi-solid stick with same performance characteristics as above paste.

Loctite® Nickel Anti-SeizeCopper-free, for stainless steel and RWKHU�PHWDO�¿WWLQJV��)RU�SUHYHQWLQJ�corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 2400°F (1315°C).

Loctite® Heavy Duty Anti-SeizeMetal-free. Lubricates up to 2400°F(1315°C).

Loctite® Moly Paste9HU\�ORZ�IULFWLRQ��/XEULFDWHV�SUHVV�¿WV��protects during break-in and under high static loads up to 750°F (400°C). $OORZV�PD[LPXP�FODPSLQJ�IURP�available torque.


298

Bonding - Acrylic Adhesives

TWO-STEP NO MIX ACRYLIC ADHESIVES - when contacting a OLTXLG�DFWLYDWRU��QR�PL[�PDWHULDOV�FXUH�UDSLGO\�DW�URRP�WHPSHUDWXUH�

WR�D�ZHDWKHU�UHVLVWDQW�ERQG��,GHDO�IRU�FORVH�¿WWLQJ�SDUWV�DQG�ZKHUH�

H[WHQGHG�RSHQ�WLPH�LV�UHTXLUHG�

Loctite® 326™ Speedbonder™ Fast Fixture$OO�SXUSRVH�ERQGHU��6WUHQJWK�RI�HSR[\�and speed of an instant adhesive. Solvent resistant. Cures in minutes. $SSOLFDWLRQV�UHTXLULQJ�IDVW�¿[WXULQJ�

Loctite® 330™ Depend® AdhesiveNo-Mix1R�PL[�KLJK�YLVFRVLW\�DGKHVLYH�IRU�a wide range of materials, including metal, wood, ferrite, ceramic, and plastic.

Loctite® 324™ Speedbonder™

High ImpactLarge gap applications. Strength of DQ�HSR[\�DQG�VSHHG�RI�DQ�LQVWDQW�adhesive. Solvent resistant. Cures in minutes. Specially formulated for toughness and impact strength.

Loctite® 325™ Speedbonder™ High Temperature Solvent resistant, activator-cured in PLQXWHV��)OH[LEOH�ERQGV�RQ�JDSV�XS�to 0.40”. Severe environments and temperatures to 350°F.

Loctite® 332™ Severe Environment $FWLYDWRU�FXUHG��QR�PL[�DGKHVLYH�WKDW�provides high temperature capability with thermal durability up to 350°F.

Loctite® 392™ Fast Fixture/Magnet Bonder Single component dual-cure acrylic. )DVW�¿[WXUH�VSHHG�DQG�WRXJK�UHOLDEOH�bonds.

Structural acrylic adhesives for structural bonding applications requiring tensile, shear and peel strength combined with maximum impact, stress and shock resistance.

TWO-PART ACRYLIC ADHESIVES��ZKHQ�VWDWLFDOO\�PL[HG��WKHVH�

adhesives develop a tough, durable bond to a wide variety of substrates, LQFOXGLQJ�PHWDOV��SODVWLFV��DQG�FRPSRVLWHV��$YDLODEOH�LQ�PL[HU�IULHQGO\�

packaging to minimize waste and process time.

Loctite® H3000 Speedbonder™ General PurposeLow viscosity adhesive forbonding plastics and composites.

Loctite® H3300 Speedbonder™ General Purpose/Fast Fixturing 1RQ�VDJ��IDVW�¿[WXULQJ�VWUXFWXUDO�adhesive for bonding plastics and composites.

Loctite® H3151™ Speedbonder™ Metal Bonder([WHQGHG�RSHQ�WLPH��([FHOOHQW�ERQG�strength on aluminum and steel. Impact and peel resistant.

Loctite® H4000 Speedbonder™ Non-SagTwo component and room temperature cure methacrylate DGKHVLYH�WKDW�¿[WXUHV�UDSLGO\��%RQGV�various plastic substrates, VWDLQOHVV�VWHHO��HSR[\�FRDWHG�PHWDO��DQG�PDQ\�¿EHU�UHLQIRUFHG�SODVWLFV��VXFK�DV�JODVV�¿EHU�UHLQIRUFHG�SRO\HVWHU��

Loctite® H4100 Speedbonder™ Ultra Fast)DVW�¿[WXULQJ�VWUXFWXUDO�DGKHVLYH��Forms strong bonds to plastics and composites.

Loctite® H4200™ Speedbonder™ ToughenedGeneral purpose plastic and composite bonder with high peel DQG�LPSDFW�UHVLVWDQFH��)L[WXUHV�LQ��minutes.

Loctite® H4500™ Speedbonder™ Metal BonderHigh strength structural adhesive for PHWDOV��)L[WXUHV�LQ��PLQXWHV�

Loctite® H4800™ Speedbonder™ Toughened([WHQGHG�RSHQ�WLPH�IRU�DVVHPEO\�DQGDGMXVWPHQW�RI�ODUJH�SDUWV��3HHO�DQG�impact resistant. High bond strength on composites.

Loctite® H8000™ Speedbonder™ Fast Fixture)DVW�¿[WXUH�WLPH�DQGH[FHOOHQW�ERQG�VWUHQJWK�RQ�PXOWLSOHsubstrates, including metals andcomposites.

Loctite® 3030™ Adhesive3RO\ROH¿Q�%RQGHU�)DVW�FXULQJ�WKL[RWURSLF�DFU\OLF�adhesive. Bonds low energy substrates.


299

Bonding - Cyanoacrylate AdhesivesLoctite®��%ODFN�0D[® Instant AdhesiveToughened (ODVWRPHU�PRGL¿HG�LQVWDQW�adhesive. Bonds metal, rubber, DQG�SODVWLF��([FHOOHQW�SHHO��impact, and shear strength.

Loctite® 401™ Prism® Instant AdhesiveSurface InsensitiveA general purpose adhesive forGLI¿FXOW�WR�ERQG�VXUIDFHV�

Loctite® 403™ Prism® Instant AdhesiveLow Odor/Low Bloom)RU�OHVV�SUHFLVHO\�¿WWHG�parts, eliminates the need for sophisticated ventilation.

Loctite® 404™ Quick Set™ Instant AdhesiveGeneral Purpose General maintenance and repair. ([FHOOHQW�IRU�UXEEHU�ERQGLQJ�

Loctite® 411™ Prism® Instant AdhesiveClear Toughened ([FHOOHQW�LPSDFW�DQG�SHHO�VWUHQJWK�LQ�JDS�¿OOLQJ�DSSOLFDWLRQV�

Loctite® 430™ Super Bonder® Instant AdhesiveGeneral industrial-grade instant DGKHVLYH�IRU�ERQGLQJ�FORVH�¿WWLQJ�metal parts.

Loctite® 444™ Tak Pak®Instant AdhesiveDesigned for printed circuit board assembly and repair.

Loctite® 454™ Prism®

Instant AdhesiveSurface Insensitive Gel General purpose, no-run clear gel. Can be applied to vertical surfaces. Ideal for porous substrates and rough and acidic surfaces.

Loctite® 495™ Super Bonder® Instant AdhesiveGeneral Purpose Designed to bond rubber, metal, and plastic parts with gaps to .004”.

Loctite® 498™ Super Bonder® Instant AdhesiveThermal Cycling Resistant Medium viscosity, high temperature product for all metals, and most plastics and rubbers. Resists temperatures to 223°F continuous or up to 250°F intermittent.


Instant AdhesiveThermal Resistant Clear, toughened, thermally resistant instant adhesive. ([FHOOHQW�KRW�VWUHQJWK�DQG�KHDW�aging properties up to 250°F.

Loctite® 4210™ Prism® Instant AdhesiveThermal Resistant Black toughened thermally resistant instant adhesive. Low viscosity and thermally resistant up to 250°F.


Instant AdhesiveThermal Resistant Gel High viscosity, black, toughened, instant adhesive. Thermally resistant up to 250°F.

Loctite® 4500™ Prism® Instant AdhesiveFast Curing/Surface Insensitive Gel Faster cure speeds on dry or acidic surfaces and substrates. The gel consistency prevents DGKHVLYH�ÀRZ�HYHQ�RQ�YHUWLFDO�surfaces.

Loctite® 4501™ Prism® Instant AdhesiveWicking Viscosity Single component, fast-curing instant adhesive. Maintains cure speed throughout its shelf life.

Loctite® 4851™ Prism® Instant AdhesiveFlexible0HGLXP�YLVFRVLW\��ÀH[LEOH��VLQJOH�component material for porous or absorbent substrates.

Loctite® 4861™ Prism® Instant AdhesiveFlexible+LJK�YLVFRVLW\��ÀH[LEOH��VLQJOH�component, general-purpose material for gaps up to .008”.


300

CleanersLoctite® Natural Blue® Biodegradable Cleaner & DegreaserConcentrated cleaner and degreaser. Can be economically diluted with water. For wipe down, pressure spraying, and immersion cleaning processes - at room WHPSHUDWXUH�RU�KHDWHG��3LQH�VFHQWHG��QRQ�ÀDPPDEOH�DQG�QRQ�WR[LF��&RQWDLQV�QR�2'&V�

Loctite® Natural Blue® Biodegradable Cleaner & Degreaser Fragrance-FreeSame product as above but without the fragrance.

Loctite® ODC-Free Cleaner & Degreaser [Naphtha]Non-aqueous, hydrocarbon-based solvent for cleaning and degreasing surfaces to be bonded with adhesives, as well as general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause ÀDVK�UXVWLQJ�RQ�ZDWHU�VHQVLWLYH�parts. Dries residue free. Contains no ozone-depleting compounds. (Formerly referenced as 7070.) NSF K1 approved.

Loctite® Aqua Power® Biodegradable Cleaner & DegreaserPenetrates, dissolves, and removes dirt and oil. Fast drying and residue-free. Environmentally friendly product LV�ELRGHJUDGDEOH��KDV�ORZ�WR[LFLW\��QR�2'&V��DQG�LV�QRQ�corrosive/non-caustic.

Loctite® Non-Chlorinated Parts CleanerPenetrates, dissolves, and removes dirt and oil from metal parts. Leaves no residue. Does not contain 1,1,1-trichloroethane; helps manage EPA halide limits.

Loctite® Pro Strength Degreaser Quickly dissolves and removes grease, oil, and dirt from iron, steel, aluminum, magnesium, copper, rubber, plastic, and concrete. Rinses off with water.

Loctite® Pro Strength Parts CleanerPenetrates, dissolves, and removes oil and grease from parts. Dries quickly with no residue. Contains no ODCs.

Loctite® Chisel® Gasket Remover (Methylene Chloride)Removes gaskets in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum, or synthetics.

Loctite® Chisel® MC-Free Gasket RemoverFree of Methylene Chloride. Foaming action lifts off gaskets in minutes. Performs better than Methylene Chloride formulations on silicone gaskets and removes most spray paints from steel panels in less than 30 seconds. Spray liquid penetrates and cleans intricate

shapes and will not run off. Suitable for wood and plaster. 1RW�IRU�XVH�RQ�SODVWLFV��OLQROHXP��RU�V\QWKHWLF�¿EHUV�

Loctite® Electrical Contact & Parts CleanerFast-evaporating cleaner removes grease, oil, and other contaminants from electrical parts and mechanical equipment. Contains no CFCs or HCFCs and is safe on most plastics. Non-conductive, non-corrosive.

Loctite® Multi-Purpose Glass CleanerRemoves tough grease and dirt from glass, chrome, DOXPLQXP��VWDLQOHVV�VWHHO��DQG�HQDPHO�¿QLVKHV��2UDQJH�scented formula will not run or streak. Contains no ODCs.

Loctite® Electrical Contact Cleaner1RQ�ÀDPPDEOH�Removes grease, oil, and other contaminants from electrical parts to prevent contact failure. Contains no CFCs or Class I ODCs. Contains HCFC-141b. May attack some sensitive plastics.

Loctite® Industrial Strength Paint StripperStrips and removes paint. Works in 10-15 minutes at temperatures from -40°F to 100°F. Contains no ODCs.

Loctite® Pro Strength Varnish Remover6XSHU�MHW�VSUD\�TXLFNO\�FXWV�DQG�UHPRYHV�JUHDVH��JXP��DQG�YDUQLVK�IURP�FKRNHV��EDIÀH�SODWHV��DQG�FDUEXUHWRU�OLQNDJH��,PSURYHV�SHUIRUPDQFH�DQG�IXHO�HI¿FLHQF\�

Loctite® Industrial Hand WipesPre-moistened with a powerful citrus-scented cleaning formula that is abrasive enough to scrub off the toughest JUHDVH�DQG�JULPH��7KHVH��´�[��´�WRZHOV�HOLPLQDWH�rinsing and drying and leave no residue.


301

Loctite®�)L[PDVWHU®��0LQXWH�(SR[\Translucent, gel-like adhesive. Sets up in 4-6 minutes. Temperature resistant up to 160°F. Requires manual cartridge dispenser gun..Loctite®�)L[PDVWHU®�3R[\�3DN™Fast Cure EpoxyThis fast cure, high strength, thick liquid reaches handling strength in 4-6 minutes.

/RFWLWH��)L[PDVWHU��)DVW�&XUH�(SR[\

Mixer Cups3UHPHDVXUHG�PL[HU�FXSV��%RQGV�LQ��PLQXWHV��([FHOOHQW�FKHPLFDO�UHVLVWDQFH��)LOOV�porosities and can be used to build up worn parts. Ideal for bonding glass, hard plastics, rubber, and metal.

/RFWLWH��)L[PDVWHU��+LJK�3HUIRUPDQFH�

(SR[\

Fiberglass reinforcement gives adhesive outstanding tensile, shear strength, and shock resistance up to 180°F. For forming permanent, water-resistant bonds in production and maintenance applications. Cartridge requires manual cartridge dispenser gun.

Loctite®�)L[PDVWHU® General Purpose (SR[\

Mixer Cups3UHPHDVXUHG�HSR[\�PL[HU�FXSV��2QH�KRXU�working time. Fills porosities and can be used to build up worn parts. Ideal for bonding glass, hard plastics, rubber, and metal.

Loctite®�)L[PDVWHU® Underwater Repair (SR[\

Putty-like material ideal for plumbing, irrigation, and marine applications. It is hand kneadable and fully cures in 1 hour.

/RFWLWH��)L[PDVWHU��)DVW�6HW�6WHHO�(SR[\

6WHHO�¿OOHG��5HDFKHV�IXQFWLRQDO�FXUH�LQ��minutes. Temperature resistant up to 200°F. For repairing pipes and other equipment that must be back in service in minutes. Cartridge requires manual cartridge dispenser gun.

/RFWLWH��)L[PDVWHU��6WDWLF�0L[HUV

0L[LQJ�QR]]OHV�IRU�)L[PDVWHU��PO�cartridges. (Not for use with Rapid Rubber Repair).

/RFWLWH��)L[PDVWHU��$OXPLQXP�/LTXLG

7ZR�SDUW��SRXUDEOH�HSR[\�V\VWHP�UHLQIRUFHG�with aluminum powder. For casting and repairing aluminum parts, and making molds DQG�¿[WXUHV�

/RFWLWH��)L[PDVWHU��

Aluminum Putty$OXPLQXP�¿OOHG�HSR[\�UHEXLOGV�repairs aluminum equipment, IRUPLQJ�D�QRQ�UXVWLQJ�¿QLVK�

Loctite®�)L[PDVWHU® Fast Set Steel Putty6WHHO�¿OOHG��QRQ�VDJJLQJ�HSR[\�IRU�¿OOLQJ�DQG�UHSDLULQJ�GDPDJHG�metal parts quickly. Functional cure in about 10 minutes.

Loctite®�)L[PDVWHU® Metal Magic Steel™6WHHO�HSR[\�LQ�VWLFN�IRUP��&XW�RII�D�VHFWLRQ��NQHDG��DQG�DSSO\�WR�OHDNLQJ�SLSHV�RU�GDPDJHG�HTXLSPHQW��&XUHV�LQ��PLQXWHV��&HUWL¿HG�DQG�approved for use with drinking water system components.

/RFWLWH��)L[PDVWHU��6WDLQOHVV�6WHHO�3XWW\

6WDLQOHVV�VWHHO�¿OOHG��)RUPV�D�QRQ�UXVWLQJ��YHU\�KDUG��GXUDEOH�¿QLVK�RQ�damaged stainless steel surfaces.

/RFWLWH��)L[PDVWHU� Steel Liquid6WHHO�¿OOHG��3RXUDEOH��VHOI�OHYHOLQJ��IRU�FDVWLQJ�LQWR�KDUG�WR�UHDFK�DUHDV��DQFKRULQJ�DQG�OHYHOLQJ��DQG�IRUPLQJ�PROGV�DQG�¿[WXUHV�

Loctite®�)L[PDVWHU® Steel Putty6WHHO�¿OOHG��QRQ�VDJJLQJ��WZR�SDUW�HSR[\�WKDW�FXUHV�WR�D�PHWDO�OLNH�¿QLVK�for rebuilding or repairing metal parts.

/RFWLWH��)L[PDVWHU��6XSHULRU�0HWDO

5HQHZV�SURWHFWV�VXUIDFHV�VXEMHFW�WR�FRUURVLRQ��DEUDVLRQ��DQG�KDUVK�HQYLURQPHQWV��)HUUR�VLOLFRQ�¿OOHG�HSR[\�KDV�RXWVWDQGLQJ�FRPSUHVVLYH�strength, chemical resistance. Non-rusting.

/RFWLWH��)L[PDVWHU��:HDU�5HVLVWDQW�3XWW\

&HUDPLF�¿EHUV�JLYH�WKLV�WURZHODEOH�SXWW\�H[FHOOHQW�ZHDU�DQG�DEUDVLRQ�resistant properties. Cures to smooth, low friction surface. For surfaces H[SRVHG�WR�ZHDU��HURVLRQ��DQG�FDYLWDWLRQ��1RQ�UXVWLQJ�

/RFWLWH��)L[PDVWHU��:HW�6XUIDFH�5HSDLU�3XWW\

7URZHODEOH�HSR[\�UHSDLUV�DQG�rebuilds wet, even underwater, surfaces. Bonds to wood, concrete, steel, iron, aluminum, brass, and some plastics.

Epoxies


302

Loctite® Nordbak® Wearing CompoundCeramic beads and silicon carbide in a high SHUIRUPDQFH�HSR[\�system protect against sliding abrasion to 250°F. Non-sagging. Trowelable.

Loctite® Nordbak® Fast Cure Wearing CompoundA faster version of the above.

Loctite® Nordbak® High Temperature Wearing CompoundResists sliding abrasion and temperatures to 450°F. Must EH�SRVW�FXUHG�IRU�PD[LPXP�WHPSHUDWXUH�UHVLVWDQFH�DQG�performance. Trowelable. Loctite® Nordbak® Ultra High Temperature Wearing CompoundResists sliding abrasion and temperatures to 550°F. Must EH�SRVW�FXUHG�IRU�PD[LPXP�WHPSHUDWXUH�UHVLVWDQFH�DQG�performance. Trowelable.

Loctite® Nordbak® High Impact Wearing Compound5XEEHU�PRGL¿HG�HSR[\�SURWHFWV�DJDLQVW�VOLGLQJ�DEUDVLRQ�and impact to 250°F. Trowelable.

Loctite® Nordbak® Castable Wearing CompoundFor casting wear-resistant parts. Pourable ceramic compound can be cast into any shape. Resists temperatures to 225°F.

Loctite® Nordbak® Pneu-Wear&RQWDLQV�FHUDPLF�EHDGV�DQG�VLOLFRQ�FDUELGH�IRU�PD[LPXP�SURWHFWLRQ�DJDLQVW�¿QH�SDUWLFOH�DEUDVLRQ�WR��)��Trowelable.

Loctite® Nordbak® Fast Cure Pneu-Wear)DVW�FXUH�YHUVLRQ�RI�DERYH��3URWHFWV�DJDLQVW�¿QH�SDUWLFOH�DEUDVLRQ�WR��)�DQG�FXUHV�LQ�MXVW��KRXUV��7URZHODEOH�

Loctite® Nordbak8 High Temperature Pneu-Wear3URWHFWV�DJDLQVW�¿QH�SDUWLFOH�DEUDVLRQ�DQG�WHPSHUDWXUHV�WR��)��0XVW�EH�SRVW�FXUHG�IRU�PD[LPXP�WHPSHUDWXUH�resistance and performance. Trowelable.

Loctite® Nordbak® Ultra High Temperature Pneu-Wear3URWHFWV�DJDLQVW�¿QH�SDUWLFOH�DEUDVLRQ�DQG�WHPSHUDWXUHV�WR��)��0XVW�EH�SRVW�FXUHG�IRU�PD[LPXP�WHPSHUDWXUH�resistance and performance. Trowelable.

Loctite® Nordbak® Combo Bead Wearing CompoundCombines the abrasion resistance of both large and small ceramic beads and silicon carbide. Protects against hard VOLGLQJ�DEUDVLRQ�DQG�H[WHQGV�WKH�OLIH�RI�PDWHULDO�KDQGOLQJ�equipment. Trowelable.

Loctite® Nordbak® Brushable CeramicBrushes on for a smooth, corrosion-resistant coating. Protects against turbulence, abrasion, and cavitation.Can also be used as a top coat over Loctite® Nordbak® wearing compounds for surface rebuilding and lasting protection. Resists temperatures to 200°F.

Loctite® Clover® Silicon Carbide *UHDVH�0L[

The standard abrasive paste for fast metal removal. Produces a smooth, ÀDW�VXUIDFH�EXW�QRW�D�SROLVKHG�RQH��/HDYHV�D�UXVW�SUHYHQWLQJ�¿OP�RQ�lapped surfaces.

Loctite® Clover® Silicon Carbide Pat Gel® :DWHU�0L[

Paste formulation for fast metal removal. Biodegradable, recommended for applications where cleanup with water is required.

Machining CompoundsLoctite® Clover®�'XSOH[�Packaging6LOLFRQ�&DUELGH�*UHDVH�0L[�LQ�WZR�convenient grit sizes (120 and 280).

Wearing Compounds


303

Flooring & Grout

/RFWLWH��)L[PDVWHU��'HHS�3RXU�*URXW

$JJUHJDWH�¿OOHG��HSR[\�V\VWHP�IRU�SRXUV�XS�WR��´�GHHS��including self-leveling applications under rails and sole plates. High strength material bonds to steel, concrete, and itself. Withstands high torque loading.

/RFWLWH��)L[PDVWHU��6XSHU�*URXW

$JJUHJDWH�¿OOHG�HSR[\�V\VWHP�LV�GHVLJQHG�IRU�JURXWLQJ�XS�WR�18” deep, including self-leveling applications under rails andsole plates under typical dry service temperatures of -29°C to +107°C (-20°F to +225°F). A 100% solids HSR[\�V\VWHP�WKDW�LV�QRQ�VKULQNLQJ��chemical and corrosion resistant, stronger than concrete, and withstands high torque loading.

/RFWLWH��)L[PDVWHU��)DVW�6HW�*URXW

Self-leveling, non-shrinking grout for installing machinery, setting anchor bolts. Cures quickly. Can be poured up to 1” thick. Compression strength and chemical resistance are superior to concrete. Forms strong bonds to old concrete and to itself.

/RFWLWH��)L[PDVWHU��+LJK�3HUIRUPDQFH�

Quartz7URZHODEOH�HSR[\�IRU�UHSDLULQJ�DQG�SURWHFWLQJ�ÀRRUV�H[SRVHG�WR�FRQFHQWUDWHG�DFLGV��DONDOLV��and solvents. Recommended for restoring and protecting old concrete.

/RFWLWH��)L[PDVWHU��)ORRU�)LOO

Trowelable. For repairing and resurfacing FUDFNV�LQ�FRQFUHWH�ÀRRUV��%RQGV�WR�ROG�DQG�new concrete and provides greater strength and chemical resistance.

Loctite®�)L[PDVWHU® Magna-CreteA two-component, rapid setting concrete repair and grouting system. Chemically resistant to most common liquids and chemicals. Bonds to concrete, wood, glass, steel, and other construction materials.

/RFWLWH��)L[PDVWHU��0DULQH�&KRFNLQJ

Self-leveling, fast curing, non-shrinking grout. Outstanding chemical and vibration resistance and compressive strength to ZLWKVWDQG�PD[LPXP�ORDGV�


304

Hand Cleaners


305

Hand Cleaners


306

Documents

MAINTENANCE ACCESSORIES - Texas Industrial Rubber and