MAHARASHTRA STATE ELECTRICITY BOARDmahadiscom.com/supplier/downloads/ten_2.doc · Web viewMAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTD VASHI CIRCLE TENDER NO. SE/VASHI/TECH/T-2/2007-2008

MAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTDVASHI CIRCLE

TENDER NO. SE/VASHI/TECH/T-2/2007-2008

FOR SUPPLY OF L.T HRC FUSES

LETTER TO THE TENDERER

M/s ______________________________

______________________________

______________________________

Dear Sirs,

Please quote your lowest rates for free delivery at Bhandup stores for

the supply of material as mentioned in Scheduled A, and return the tender

documents duly filled in, signed on each page. You are also requested to

note the instructions to the tenderers before submitting your offer.

Yours faithfully,

SUPERINTENDING ENGINEER

M.S.E.D.C.Ltd.Vashi Circle.

VASHI,Navi Mumbai 400 703. DATE:-

1



FOR SUPPLY OF L.T HRC FUSES

INSTRUCTIONS TO THE TENDERERS 1.a) Supply of material as specified in Schedule " A " appended hereto. on monthly basis for the period of six months. b) A monthly requirement as indicated in the Schedule has to be supplied in full on the basis of ordered quantities. Although we may rely on single reputed manufacturer for supply of the quantity indicated, it is likely that in order to ensure timely receipt of material, the quantities indicated are likely to be split for more than one and ordered on the different suppliers. c) The material is to be delivered on monthly basis at our Bhandup stores. d) The monthly quantities indicated are required to be delivered on each of 31st of month or on subsequent working day, if that day happens to be a Public Holiday. e) The quantities required by us are approximate and the total quantity may very as per requirement. f) In case we require an additional quantities in any month the stock of next month is to be advanced for which 15 days advance intimation will be given by us. The materials so advanced shall be deleted from the supplies on due date of delivery. 2. PRICES : a) Tenderers should quote only single price/rate for the quantity offered by them. The offers with prices quoted on slab basis and or with any conditional discount on any account shall not be accepted. b) Prices should be quoted on free delivery basis at our Bhandup Stores and inclusive of packing forwarding, freight & transit insurance but excluding Excise Duty, Sales Tax/Vat, Octroi etc. The prices should be on firm quotation basis. In case the Prices are quoted including Excise Duty, the present rate of Excise Duty should be mentioned separately.

3. SALES TAX :

1. This Company is registered under and as Sales tax act of the Maharashtra State, so also under the Central Sales Tax Act 1956.

2. Declaration on Form "C" will be issued whenever and wherever

2

applicable. 3. Tenderer should give his Sales Tax/VAT Registration No. and mention Tax applicable to his offer in Schedule " A ". a) Sales Tax / VAT % b) Central Sales Tax % with " C " Form Goods will be moving from other State to Maharashtra State or c) Sales Tax/Central Sales Tax/VAT is not leviable as sales are second sale. Sales Tax Registration No. d) Any revision in statutory Taxes will be payable.

4. DISCLOSING THE NAME OF THE MANUFACTURER :

Whenever material is described by name of the particular make being offered on re-sale basis, the Tenderer shall specifically disclose the name of the original supplier or the manufacturer. The Firm shall not be allowed to supply the material offered from any other manufacturer than the quoted make unless prior permission in writing is so obtained from this office. 5. QUOTATION : i. Tenderer shall quote his lowest reasonable rate in the enclosed Schedule "A” only and not on his letterhead. ii. Tenderer shall quote his rate per unit specified in Schedule " A " in figures as well as in words. Any variation in the rates etc. will not be allowed on any ground such as mistake, misunderstanding etc. after the Tender has been submitted. The Tendered rate must include in general.

a) All charges for container and packing.

b) All charges to effect free delivery at our stores. iii) Suppliers printed Terms and Conditions will not be considered as forming part of the offer. iv) In case of diversion between the rates in figures and words, the tender is liable to be rejected. 6. AMBIGUITY IN QUOTATION :

Tenderers are requested to make a note that in case of ambiguous Terms in respect of free delivery at our stores, Excise Duty, Sales Tax/VAT or if the blanks are not filled in or answered, the offer shall be liable to be rejected.

3

7. FILLING IN OF QUESTIONAIRE :

Tenderers are requested to ensure that the comments against each and every item/ clause of Annexure/Questionnaire shall be clearly filled in and answered. Any item / clause shall not be left blank or unanswered. If any item/clause is not applicable, the words ` NOT APPLICABLE " shall be written against it. 8. ADDITIONS/ALTERATIONS PROHIBITED :

Tenderers shall not make any additions, alterations or the changes in the tender form and the conditions of Tender and supply, including the description and specification of material mentioned. In the enclosed schedule " A ” they should quote rate for the material described or write the words ' NOT QUOTED " against each of item. 9. SIGNING OF THE TENDER DOCUMENTS :

Offers must be submitted in the tender documents only and be clearly and legibly filled in with all Schedule and must be either in ink or typewritten. Offer and all documents comprising of tender details, tender form, conditions of Tender and supply, Questionnaires, Drawing, Test Certificates and other documents should be duly signed on each Page and corrections, if any, to the information filled in should be duly initiated.

There should be no over-writing. It should be avoided and new details given and duly initialed. Tenders not signed as above shall be liable to be rejected. 10. QUANTITIES OFFERED :

Tenderers if are not in a position to quote for entire quantity and for delivery as required, they should state specifically the quantities which they can deliver at the price quoted. Silence the point will entail the responsibility on tenderer to supply full quantity as per delivery required at quoted rate.

11. TIMELY SUBMISSION OF OFFER : i. Telegraphic offers or offers received in the form of Telex Message shall not be entertained and considered under any circumstances. ii. Tender documents received after the due date and time of the submission will not be accepted. iii. Tender received in person or by post after the due date and time of submission shall not be opened and no correspondence will be

4

entertained. The company shall not be responsible for any cause arising of such delay.

iv. In case the date of opening happens to be Holiday, the Tender shall be opened on the next working day at the same time as far as possible.

v. The Company reserves right to reject any or all offers without assigning any reason thereof. 12. DISREGARD OF TENDER CONDITIONS :

The Company reserves the right to reject any tender which does not conform to any of the conditions or instructions etc. in respect of the tender. 13. The Tenderer should note that no correspondence shall be entertained or considered after the due date 14. To judge the capacity and capability of the tenderer or his manufacturer, the tenderer shall furnish a list of orders executed by him or his Manufacturers for the last 3 years indicating the name of the Purchaser, material ordered, quantity ordered, value, the delivery quoted, the delivery executed and the deviation or slipage in delivery. Details of pending orders and quantities outstanding against orders of this office and others should be indicated separately. 15. ACCEPTANCE OF TENDER

The Company does not bind itself to accept the lowest offer or disclose any reason for rejection of any Tender or part of Tender. It is also not binding on the Company to disclose any analysis, report on Tender or samples. The company shall reserve right to order out/procure any quantity in excess to the extent of 50% or any less quantity of the quantities offered by the Tenderers. The quantity specified would be for dispatch to destination at our Bhandup stores. 16. SUBMISSION OF SAMPLES :

Wherever the sample are required the same should be fabricated and strictly conforming to the specification of the material offered. If the sample is found to be not as per the specifications, the offer will not be considered and no correspondence from the Tenderer for requirement will be entertained. The sample of successful Tenderers on notification, shall collect the sample within 30 days from the date of notification at their own cost, failing which the sample will be treated as Company's property without any payment and any further notice will not be given.

5

The Tenderers who send their offers or samples, by post should ensure superscribing the details of dispatches of samples on the envelope containing their offer.

Wherever requirement of sample is specified, no Tender will be opened unless the condition of the sample submission is complied with. In case the sample is not submitted as required, it will be considered that no offer is made by the tenderer for supply of material. 17. EARNEST MONEY DEPOSIT :

Tenderers should pay 1% of the TENDER VALUE i.e. Rs.7,500/- towards the Earnest Money unless the firm is exempted on account of statutory directives. Earnest Money shall be paid in CASH in the office of the Superintending Engineer, Maharashtra State Electricity Distribution Company Ltd, Vashi Circle, " Plot No. 5, Sector-17, Near Abhudaya Bank, Vashi, Navi Mumbai or by Demand Draft drawn on any Scheduled Bank / Nationalized bank in Mumbai / Vashi. In favour of Maharashtra State distribution company Ltd. A reference to the Tender number should be given in case the E.M.D. is paid in Cash before the due date of the Tender and the relevant deposit amount and receipt No. should be mentioned in the Tender. Interest shall not be paid by us on this deposit.

Earnest Money Deposit shall be forfeited or adjusted, in the following cases.

a) In case the Tenderer withdraws tender/offer during the validity period.b) In case the Tenderer fails to pay the Security Deposit if the contract is awarded. 18. EARNEST MONEY OF UNSUCCESSFUL TENDERER :

Earnest Money Deposit shall be returned to the unsuccessful Tenderers as soon as possible after the Tender has been decided, and on submission of Receipt of E.M.D. payment duly endorsed at the back side of the receipt to Superintending Engineer, Maharastra State distribution company ltd., Vashi Circle, Plot No. 5, Sector- 17, Vashi, Navi Mumbai. 19. OFFER OF S.S.I. UNITS

Offers of the S.S.I. Units shall be considered in accordance with the State Government's G.R.No. BKS/ 1088/ (2512)/ Industries-6, dated 2/1/1992. 20. DELIVERY : Tenderer is requested to quote deliveries free at our stores only. The Tenderer should quote as per delivery Schedule attached. Offers with qualified delivery schedule which directly or indirectly affect conditions of Tender and supply, shall be liable for rejection.

6

In view of tender being accepted for supply of the material , the

Tenderer should strictly adhere to the delivery period as the time being essence of the supply. 21. LIQUIDATED DAMAGES a) PENALTY FOR LATE DELIVERY :

In case the material is not delivered in time, the supplier shall be liable to pay penalty, at our prescription, at halt % of the price per week subject to a maximum of 10% reckoned on the contract value of such incomplete supply of material including the portion supplied which could not be brought into commission due to any part thereof not having delivered in time subject to Force Majeure. Non-availability of raw material or its procurement will not be considered as a reason for late delivery and Force Mejeure. b) RISK PURCHASE :

Failure to effect the supply of material, we shall procure the material from market at the rates prevailing & in accordance with Indian Contract Act, the additional cost required to procure the material shall be recovered from he suppliers on failed whom the orders would be placed and who have to deliver the material within stipulated period. 22. CONDITIONS OF SUPPLY : i) QUALITY OF SUPPLY : Material offered should be strictly as per specification for material mentioned in Schedule "A" and as per drawing when mentioned, strictly in accordance with it and as per the approved standards/samples. In case of material for which there are no standards the supplies shall be of the best workmanship and quality and subject to our approval. Bulk supplies shall commence only after the approval of first sample. Supplier will keep this office informed of the progress of manufacture of the material. ii) VALIDITY OF THE TENDER :

The Tender shall be kept open for acceptance by the company for a period of 60 (Sixty) days from the date of opening of the Tender and the Tenderer shall be bound to supply at the same rate on acceptance by the Company during validity period. iii) SECURITY DEPOSIT :

7

Supplier should pay Security Deposit at the rate of 10% of the value of the order. Security Deposit is payable by (a) Cheque (b) Cash (c) Demand Draft (d) Pay Order.

iv) PAYMENT OF BILLS :

Suppliers will be paid 100% payment of the price along with Excise Duty, Sales Tax/VAT etc. of each consignment by A/c Payee Cheque within reasonable period from supply of material and the date of submission of bills to us. The payment will also be subject to supply of material as per our specification, in good condition and verification thereof and on receipt of S.R. Note from the Stores as well as availability of funds.

v) INSURANCE :

In all cases Insurance shall be done by the supplier with Government Insurance Fund or with other Insurance Authorities subject to payment shall be made at the rate as prescribed by the Govt. Insurance Authorities and subject to our approval for all risks. vi) GUARANTEE :

Material should be guaranteed for workmanship and quality for a period of 18 months from the date of supply or 12 months from the date of commissioning whichever is earlier. In case subsequently during usage of material or prior to that if any defect in the material is noticed by us the good quality material shall be supplied free of cost and earlier material shall be taken back by the supplier.

vii) CONSIGNEE :

The Consignee shall be either Stores Superintendent Bhandup It is assumed that you are fully aware of the Company's General Conditions of Contract for the supply of plant, equipment and material particularly in respect of Security Deposits, Terms of payment, Penalty for the late delivery, etc. and other important terms, any ignorance of these conditions will not exempt you from your liability to abide by the same. ix) OCTROI :

In case material is to be delivered at Bhandup the Octroi charges if applicable will be reimbursed on producing the original document in this respect. The Octroi if applicable should be clearly be mentioned in Schedule “A.”

22. JURISDICTION :

All quotation disputes or differences arising either out of or in connection with this Tender. If conducted shall be subject to exclusive jurisdiction of Mumbai / Thane courts.

8

23. INCOME TAX

The tenderer should submit the income tax clearance certificate.

Superintending Engineer, Vashi Circle

SEAL AND SIGNATURE OF THE TENDERER

9



LETTER TO THE SUPERINTENDING ENGINEER

THE SUPERINTENDING ENGINEERMAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTDVASHI CIRCLE, PLOT NO. 5, SECTOR- 17, VASHI, NAVI MUMBAI. Dear Sir,

I agree to supply the mentioned material in the above tender at the rates herein tendered by me subject to the conditions of the tender and which I have carefully read and which I have thoroughly understood and to which I hereby agree.

I hereby agree to keep this offer open for 60 days after the returnable date of the tenders and shall be bound by communication of acceptance dispatch within the prescribed time.

Yours faithfully,

Date : Name and address of the Tenderer SEAL AND SIGNATURE OF THE TENDERER.

10



IMPORTANT

The bidder shall submit his offer in two envelopes

Envelope No. 1. QUALIFYING BID 2. PRICE BID

Envelope No. 1 :Qualifying bid shall have duly attested copies of following documents

1) Receipt regarding payment of E.M.D amounting to Rs.7,500/-2) Certificate endorsing quality of the manufacturing company i.e. ISO –

9001/9002 3) Valid Sale Tax/ VAT registration 4) Previous experience of supplying similar items to MSEDC Ltd. of 75% of value in previous financial year in single order.5) BIS Certification Marks Licence as per IS No.13703/19936) CPRI/ERDA Test report as per IS 13703 (Part-1)- 19937) Samples

Envelope No.2 : Price Bid shall have

1) Tender Document properly filled.2) If acceptable, tenderer may give his consent to supply at lowest parallel rate. Initially, while opening the tenders, the envelope No.1 i.e qualifying Bid will be opened first. The price Bids of only those bidders who have qualified in the qualifying Bid will be opened. For qualification all the documents mentioned above are required.

SUPERINTENDING ENGINEER

11



QUESTIONNAIRE TO THE TENDERER

1) Name and address of the Firm/Company

tendering quotation. 2). Name and address of Proprietors/Partners/Directors of the Firm/Company.

3) Name and address of the Manufacturer. 4) S.S.I. Registration: Whether you are registered as SSI Unit with the Govt. of Maharashtra for the item under purchase. If so give S.S.I. Registration No. and Date ( Xerox copy of your SSI Registration Certificate should be enclosed. 5) Whether you have paid the required Earnest Money. Please state the Receipt No. and the amount for which the Earnest Money is paid. 6) Whether the equipments offered confirm to the relevant I.S. specifications / our

specifications.

7) Whether any of MSEDCL. Offices in State placed any time any order/s with you previously for the equipment / material for which you have tendered the quotation? If yes, please give full details about the execution of the order.

12

8) Whether you/your principals are having proper equipments for the Manufacture of the items forwhich the quotation has been tendered? Pleasegive the full details of the Manufacturing plant and machinery (This information to the furnishedif no order) has been placed on the Tenderer up till now for his Tenderd Item).

9) Whether you/your principles are having facilities for Routine Test to be carried out as per the requirement? Please submit details of the Testing equipments.

10) Any other information if required may be given.

Seal and Signature of the Tenderer

13

MAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTD

VASHI CIRCLE


Guaranteed and other Technical Particulars of L.T. HRC Fuses -------------------------------------------------------------------------------------------

Sr. Description (a) Particulars required by MSEDCL no. (b) Particulars to be attested by the Tenderer. For L.T. H.R.C.Fuse links of capacity ------------------------------------------------------------------------------------------ Rating of fuses 630A, 400A, 315A, 250A,

------------------------------------------------------------------------------------------ 1 Manufacturer's Name 2 Standard Specifications (a) IS 13703 Part I/II of 1993 with latest amendment (b) 3 Voltage rating & HZ (a) 500 volts AC 50 HZ, Also suit- -able for +6% variation of supply voltage and +5% variation of frequency (b) 4 Breaking Capacity (a) 80 kA at 500 Volts (b) 5 Fusing Factor (a) 1.6 of Rated current capacity (b) 6 Flag indicator for (a) Required positive indication when fused (b) 7 Hard steatite Ceramic (a) Required body to withstand higher current & insulating properties as per IS 13703 of 1993 (b)

14

8 Silver Bond Material for (a) Required element offering low (b) resistance

9 Fuse having low watt (a) Required as per IS loss preferred IS 13703 of 1993 (b)

10 Length of fuses Required (a) 135 mm 150mm (b) 11 Special grade non-magne- (a) Required tic pure silica and (b) moisture free should be filled up as arc quenching medium for heat absorption 12 The fuses should be able (a) Required to withstand the transit (b) fault without damage and clear the overloads and clear the fault currents 13 ISI mark on every fuse (a) Required with name of manufacturer (b) 14 Every fuse should be (a) Required marked as (MSEDCL) (b) Temperature Rise: The Maximum Temperature rise at fuse base terminals shall not exceed 55 deg. C when tested as per clause 8.3 of IS 13703 of 1993. The HRC Fuses should have characteristic with a time lag in a overload region and quick response in the short circuit region. Seal & Signature of the Tenderer

15

MAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTD.VASHI CIRCLE

TENDER NO. SE/VASHI/TECH/T-2/2007-2008 SPECIFICATION FOR LOW VOLTAGE HIGH RUPTURING CAPACITY FUSES 1. SCOPE: This specification covers design, manufacturing dimensions and constitutional feature of distribution / Industrial application of Low Voltage High rupturing capacity fuses. The specification does not deal with all the details of design and construction of the L.V.HRC fuses. It may be noted that the details specified are bare minimum that are required. The specifications cover the general requirement of low voltage fuses used for L.T. distribution system, used for protection of L.T. distribution cables of various sizes in the distribution system. The fuses shall be confirming to IS 13703 Part I/II 1993 amended upto date which specify the salient dimensions and constitutional feature of fuses with fuse links with blade contacts. 2. DIMENSIONS: Dimensions shall be strictly as stated in IS: 13703 Of 1993 for the sizes 02 03 01 as specified below

1. 630 Amps2. 400 Amps & 315 Amps 3. 250 Amps

3. CHARACTERISTICS OF FUSES: The time/current characteristics based on ambient temperature of 27 degree C and at maximum rated voltage of 500 volts AC shall be submitted alongwith the tender, which shall confirm to IS 13703 of 1993. The HRC fuses should have characteristics with a timelag in a overload region and quick response in the short circuit region. 4. MARKING:

The fuselinks for distribution purpose shall have the

16

marking as specified in IS: 13703 of 1993.

5. TEMPERATURE RISE LIMITS The maximum temperature rise at fuse base terminals shall not exceed 55 degree C. When tested as per Clause 3 IS 13703 of 1993. The test shall be performed at any value of ambient air temperature between 22 degree C and 35 degree C. 6. POWER LOSS: The fuses shall have power loss will below the limits specified in Indian Standards. For the purpose of verifying the power loss of the fuse links, the fuse shall comprise a test fuse base, or fuse holder or the specified test ring and the fuse link under test conventional currents of General purpose fuse links. The conventional non-fusing current (In) and the conventional fusing current (It) for an ambient temperature of 27 degree C shall be as a multiple of the rated current, the multiple prescribed is 1.6 of conventional fusing current. The rated breaking capacity for fuses having rated voltage upto and including 500 Volts shall not be less than 80 KA. GENERAL TECHNICAL REQUIREMENTS (a) Strict compliance to performance & Dimensional requirement of IS: 13703 of 1993. (b) Fuses shall be tested at CPRI according to above standards. (c) Rated current - 250A to 630 A (d) Rated voltage - 500 V AC (e) Rated frequency - 50 Hz (f ) Rated breaking capacity - 80 KA (g) Close over current protection with fusing factor not ex ceeding 1.6 (h) Saving in power and lower Temperature Rise due to low watt loss. (I ) Low let through energy and low cut off currents at short circuits. (j ) Positive fuse operation indication Safe inter-changeability with existing makes Rating wise colour coded levels Elements Silver/oxygen free Electrolytic copper Fuse body Steatite Contacts Copper/copper alloy

17


VASHI CIRCLE


SCHEDULE “A”

FOR SUPPLY OF L.T HRC FUSES Sr.No.

Description of material Unit Qty Rate per unit in Rs.

1

A

B

C

D

Supply of 500V, 80KA non deteriorating LT HRC Fuse links bearing ISI mark. As per IS 13703 part 2 section I having low fusing factor, low cut off current, low watt loss, low I-T with MSEDCL mark on each fuse link for following ratings as per Guaranteed Technical Particulars.SAMPLE SHOULD BE SUBMITTED

315 Amp Size 02 400 Amp Size 02

630 Amp Size 03

250 Amp Size 01

Nos.

Nos.

Nos.

Nos.

Limited to Rs.7.5 lacs

Basic Excise Duty (if applicable ) :

Sales Tax /VAT with C form :

Octroi :

SEAL AND SIGNATURE OF TENDERER

18

Tender NO. SE/VASHI/TECH/T-2/2007-2008

COPY NO.

Issued to M/s. ___________________

___________________

MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD.

CIRCLE OFFICE, VASHI

TENDER FORM SUPPLY OF L.T HRC FUSES

TENDER NO. 02.

Returnable not later than 12.00 Hrs. on Dt. 20/07/2007Tender will be opened at 15.00 Hrs. on Dt. 20/07/2007

ESTIMATED COST OF TENDER RS. 7.5 LAKHS

OFFICE OF THE SUPERINTENDING ENGINEER, Maharashtra State Electricity Distribution Company Ltd.

Vashi Circle, Plot No. 5, Sector-17,

Vashi, Navi Mumbai

Phone No. 2789 0174

2789 6730

Price : Rs. 500.00 per copyRs. 550.00 by post

19


VASHI CIRCLE


Name of work: Supply of L.T HRC fuses

INDEX

__________________________________________________________

Sr. Description Page No. No.

__________________________________________________________

1 Letter to the tenderer 1

2 Instructions to Tenderers 2

3 Letter to the Superintending Engineer 10

4 Questionnaire to the tenderer 12

5 Technical Particulars of L.T HRC fuses 14

6 Specification of L.T HRC fuses 16

7 Schedule “A” 18

20

Documents

MAHARASHTRA STATE ELECTRICITY BOARDmahadiscom.com/supplier/downloads/ten_2.doc · Web viewMAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO. LTD VASHI CIRCLE TENDER NO. SE/VASHI/TECH/T-2/2007-2008