MAGICRON EA ENAMEL (Code No. : 273 – series) ---------------------------------------------------------------------------------------------------------- TYPE Magicron EA is solid paint for top coat, with thermo setting acrylic, and melamin resin as binder and epoxy resin to increasing the cor rosion resistant. Can be used without primer surfacer. Special for electric equipment. ------------------------------------------------------------------------------------------------------------------------------- USE Electric appliances, such at refrigerator, washing machine, air conditioner, etc. ------------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. High gloss retention. 2. Good chemical resistance. 3. High solid contents. 4. Good corrosion resistance. ------------------------------------------------------------------------------------------------------------------------------- COLOUR Any colour. ------------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr. ------------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic spray. ------------------------------------------------------------------------------------------------------------------------------- THINNER Magicron EA Thinner. ------------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 25 up to 30% by volume. ------------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 20 sec / NK2 cup. ------------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 – 35 microns. ------------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING 8 – 10 m²/ltr/coat. RATE ------------------------------------------------------------------------------------------------------------------------------- SETTING TIME 10 minutes. ------------------------------------------------------------------------------------------------------------------------------- DRYING TIME 150ºC x 30 mins or 160ºC x 20 mins. ------------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE + 60% for white colour. ------------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY + 70 KU (25ºC). ------------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY + 1.27 for white colour (depend each colour). ------------------------------------------------------------------------------------------------------------------------------- HARDNESS H to 2H (Mitsubishi pencil). ------------------------------------------------------------------------------------------------------------------------------- FINENESS Below of 10 micron. ------------------------------------------------------------------------------------------------------------------------------- HIDING POWER 40 micron after dry.

KANSAI NEW CHASSIS BLACK (Code No. : 116 –006) ---------------------------------------------------------------------------------------------------------- TYPE Kansai new chassis black is shyntetic paint for chassis of automobile, truck and machinary. ---------------------------------------------------------------------------------------------------------------------------- USE Chassis truck. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Good adhesion. 2. Good water and oil resistance. 3. High flexibility. 4. Fast dry. 5. Good corrosion resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Any colour, full gloss, semi gloss or matt. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Spray. ---------------------------------------------------------------------------------------------------------------------------- THINNER Chassis Thinner ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 25 up to 30% by volume. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 – 20 sec./NK2 cup. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 20 – 25 microns. ---------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING 9 m²/ltr/coat. RATE ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME SET TO TOUCH 15 mins at 30°C SEMI DRY 30 mins at 30°C HARD DRY 5 hrs at 30°C ---------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE MATTER 49 + 3%. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 70 + 2 KU (25°C). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 0.94 + 0.03. ---------------------------------------------------------------------------------------------------------------------------- FINENESS max 25 micron. ---------------------------------------------------------------------------------------------------------------------------- HIDING POWER 20 micron after dry.

AMILAC NO. 2 MO ENAMEL (Code No. : 192 – series) ---------------------------------------------------------------------------------------------------------- TYPE A hig grade one coat finish baking enamel based on alkyd resin and melamine resin as binder system. ------------------------------------------------------------------------------------------------------------------------------- USE Topcoat for automobiles. ------------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. High gloss. 2. Good appearance. 3. Good outdoor durability. 4. Good chemcial resistance. 5. Good physical properties. 6. High solid content at the spray viscosity. ------------------------------------------------------------------------------------------------------------------------------- COLOUR Available in many solid colours. ------------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr. ------------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic spray. ------------------------------------------------------------------------------------------------------------------------------- THINNER Amilac Thinner No.2. ------------------------------------------------------------------------------------------------------------------------------- THINNING RATIO Enamel : thinner = 100 : 25 – 30 (by weight). ------------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 – 20 sec/NK-2. ------------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 – 40 microns. ------------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING 8 – 10 m²/ltr/coat RATE ------------------------------------------------------------------------------------------------------------------------------- OVERCOATING INTERVAL Min. 10 minutes. ------------------------------------------------------------------------------------------------------------------------------- DRYING TIME 150°C x 30 min.C ------------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE 55 – 70% (dependent on the shade of color) ------------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 67 + 2 KU (25°C). ------------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1,00 – 1,40 (dependent on the shade of color). ------------------------------------------------------------------------------------------------------------------------------- PENCIL HARDNESS HB - F (Mitsubishi UNI pencil). ------------------------------------------------------------------------------------------------------------------------------- FINENESS Max. 10 micron. ------------------------------------------------------------------------------------------------------------------------------- HIDING POWER Max. 40 microns (except special colors).

AMILAC PRIMER SURFACER (Code No. : 198 – series) ---------------------------------------------------------------------------------------------------------- TYPE Alkyd melamine paint with Epoxy as additivve to set the satisfy properties as primer surfacer. One coat primer without Red Primer with baking system. ---------------------------------------------------------------------------------------------------------------------------- USE For automative assembling plant, for commercial automitive like bus, truck etc. Able to use for primer of Amilac. (melamine resin paints) ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. To increase the gloss of top coat. 2. Good adhesion to steel and top coat. 3. Flexible and tough. 4. Long protection period. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Grey and others. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic spray. ---------------------------------------------------------------------------------------------------------------------------- THINNER Amilac Thinner. ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO Up to 30% by volume. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 – 20 sec/NK-2. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 35 – 45 microns. ---------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING 8 – 10 m²/ltr/coat. RATE ---------------------------------------------------------------------------------------------------------------------------- SETTING TIME 10 mins before oven. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 150ºC X 30 mins. ---------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE 65 – 70%. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITYY 60 – 65 ºKU (25ºC). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.30 + 0.05. ---------------------------------------------------------------------------------------------------------------------------- FINENESS 30 micron maximum. ----------------------------------------------------------------------------------------------------------------------------

HARDNESS H (Mitsubishi UNI pencil) AMILAC 1 M DEEP BLACK (Code No. : 191 – 002) ---------------------------------------------------------------------------------------------------------- TYPE Alkyd modified melamine thermosetting 1 coat 1 bake. ---------------------------------------------------------------------------------------------------------------------------- USE Steel parts especially fuel tank. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. High gloss retention. 2. Good corrosion resistance. 3. Good Adhesion. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Black gloss. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD By air spray or electrostatic gun spray. ---------------------------------------------------------------------------------------------------------------------------- THINNER Amilac Thinner. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 – 20 sec/Iwata NK2 cup. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 – 40 microns. ---------------------------------------------------------------------------------------------------------------------------- GLOSS 60ºC > 90 ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 150º - 160ºC X 30 mins. ---------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE 53 + 3%. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 65 + 3 KU (25ºC). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.00 + 0.03. ---------------------------------------------------------------------------------------------------------------------------- FINENESS 10 micron maximum. ---------------------------------------------------------------------------------------------------------------------------- HARDNESS B - HB (Mitsubishi UNI pencil) ---------------------------------------------------------------------------------------------------------------------------- HIDING POWER (b/w) 30 microns maximum ----------------------------------------------------------------------------------------------------------------------------

AMILAC NO. 2 MC ENAMEL (Code No. : 192 – series) ---------------------------------------------------------------------------------------------------------- TYPE A hig grade one coat finish enamel based on alkyd resin and melamine resin and epoxy resin as binder system. ---------------------------------------------------------------------------------------------------------------------------- USE For electric appliances; air conditioner, electric fan, etc. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. High gloss. 2. Good outdoor resistance. 3. Good chemcial resistance. 4. High solid content at the spray viscosity. 5. Tough and hard. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Available in many solid colours. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic spray. ---------------------------------------------------------------------------------------------------------------------------- THINNER Amilac Thinner No.2. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 – 20 sec/NK-2. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 – 40 microns. ---------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING 8 – 10 m²/ltr/coat. RATE ---------------------------------------------------------------------------------------------------------------------------- SETTING TIME Min. 10 minutes. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 150ºC x 20 min. ---------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE 53 – 65% (dependent on the shade of color) ---------------------------------------------------------------------------------------------------------------------------- VISCOSITY Approx. 64 KU (25ºC). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1,00 – 1,40 (dependent on the shade of color). ---------------------------------------------------------------------------------------------------------------------------- HARDNESS HB - F (Mitsubishi UNI pencil) ---------------------------------------------------------------------------------------------------------------------------- FINENESS Max. 10 micron. ---------------------------------------------------------------------------------------------------------------------------- HIDING POWER Max. 40 microns (except special colors). ----------------------------------------------------------------------------------------------------------------------------

AMILAC NO. 3 ENAMEL (Code No. : 193 – series) ----------------------------------------------------------------------------------------------------------- TYPE Alkyd melamin paint for top coat with oven dry. ------------------------------------------------------------------------------------------------------------------------------- USE 1. Steel furniture (lockers, desks, chairs, shelves, etc). 2. Commercial automotive, and machinery. ------------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. High gloss retention. 2. Can be used at low temperature baking. 3. Good weathering resistance. 4. Good chemical resistance. ------------------------------------------------------------------------------------------------------------------------------- COLOUR Any colour for solid colour. ------------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Kg. ------------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic spray. ------------------------------------------------------------------------------------------------------------------------------- THINNER Amilac Thinner. ------------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 25 – 30% by weight. ------------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 – 22 sec/NK-2. ------------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS Minimum 30 microns. ------------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING 8 – 10 m²/ltr/coat. RATE ------------------------------------------------------------------------------------------------------------------------------- SETTING TIME 7 mins before oven. ------------------------------------------------------------------------------------------------------------------------------- DRYING TIME 120ºC x 30 mins. ------------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE 53 – 65% (depends on the color) ------------------------------------------------------------------------------------------------------------------------------- VISCOSITY 65 + 2 KU (25ºC). ------------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1,00 – 1,40 (depends on the color). ------------------------------------------------------------------------------------------------------------------------------- HARDNESS HB - F (Mitsubishi UNI pencil). ------------------------------------------------------------------------------------------------------------------------------- FINENESS Max. 10 micron. ------------------------------------------------------------------------------------------------------------------------------- HIDING POWER 40 micron maximum after dry (exception for special colour). ------------------------------------------------------------------------------------------------------------------------------- GLOSS/APPEARANCE Also available semi gloss and matt.

MAGICRON ALC-2 TYPE BASE COAT / CLEAR ---------------------------------------------------------------------------------------------------------- TYPE Magicron ALC-2 is thermosetting acrylic modified melamine and epoxy resin, outstanding performance for aluminium wheel coating ---------------------------------------------------------------------------------------------------------------------------- USE Top coat for aluminium wheel. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Good gloss retention. 2. Good chemicals resistance. 3. Good adhesion on aluminium wheel substrate. 4. Good corrosion resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Base coat metallic color as undercoat. Clear coat transparent as Top Coat. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic gun spraying. ---------------------------------------------------------------------------------------------------------------------------- THINNER Magicron ALC-2 Thinner. Base coat Thinner (295 – 003) Top coat Thinner (295 – 065) (295 – 010) ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO Base Coat : 20 – 40%. Clear Coat : 20 – 30%. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY Base Coat : 14 – 16 sec/NK2--> Bake 140ºC x 20. Clear Coat : 18 – 20 sec/NK2 --> Bake 140ºC x 20. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS Base Coat : 15 – 20 μ. Clear Coat : 30 – 40 μ dft. ---------------------------------------------------------------------------------------------------------------------------- PAINTING SYSTEM 2 coat 2 bake. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 140ºC x 20 – 30 mins. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 63 – 65 KU (25ºC). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 0.94 – 1.00 ---------------------------------------------------------------------------------------------------------------------------- HARDNESS Min Hb ----------------------------------------------------------------------------------------------------------------------------

MAGICRON AL-2500 TYPE BASE COAT 2 CIB ---------------------------------------------------------------------------------------------------------- TYPE Magicron ALC-2500 is thermosetting acrylic modified melamine and epoxy resin, good adhesion performance for aluminium wheel. ---------------------------------------------------------------------------------------------------------------------------- USE Base coat aluminium wheel. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Good applicability. 2. Good chemicals resistance. 3. Good gloss retention. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Base coat metallic color as undercoat. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr/ ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic gun spraying. ---------------------------------------------------------------------------------------------------------------------------- THINNER Magicron ALC-2500 Thinner (295 – 003). ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO Base Coat : 30 – 50%. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY Base Coat : 13 – 15 sec/NK2. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 15 – 20 μ. ---------------------------------------------------------------------------------------------------------------------------- RECOMMEND PAINTING 2 coat 1 bake. Wet on Wet Top Coat. SYSTEM ---------------------------------------------------------------------------------------------------------------------------- TOP COAT TYPE Magicron ALC-2 Clear. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 140ºC x 20 – 30 mins. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 60 – 63 KU (25ºC). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 0.94 – 0.98. ---------------------------------------------------------------------------------------------------------------------------- HARDNESS Min Hb ---------------------------------------------------------------------------------------------------------------------------- PAINTING SYSTEM 1. Primer Coat ---> Baking. 2. Magicron AL-2500 Base Coat W/W. 3. Magicron ALC-2 Clear ---> Baking. ---------------------------------------------------------------------------------------------------------------------------- HIDING POWER Max 20 μ ( DFT) ---------------------------------------------------------------------------------------------------------------------------- LIFE TIME Keep indoor use for 3 months. (25°C)

AQUASOL BLACK. T (Code No. : 311 – 004) ---------------------------------------------------------------------------------------------------------- TYPE Water based epoxyester and melamine resin paint. ---------------------------------------------------------------------------------------------------------------------------- USE Dipping type under coat for automobile body frame, metal parts, etc. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Good resistance againts corrosive condition. 2. Excellent water and humidity resistance. 3. Touch and hard. 4. Good physical property. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Black. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Dipping ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO Aquasol Black = 100 Aquasol Thinner = 5 Water = 5 ---------------------------------------------------------------------------------------------------------------------------- THINNER Water. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 25 + 5''/NK-2 Cup at 30ºC. ---------------------------------------------------------------------------------------------------------------------------- DIPPING TIME 5 – 10''. ---------------------------------------------------------------------------------------------------------------------------- SETTING TIME 5 minutes. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 170°C x 20 min. ---------------------------------------------------------------------------------------------------------------------------- pH 7,5 – 8,5. ---------------------------------------------------------------------------------------------------------------------------- RECOMMEND OF FILM 15 – 20 μ/coat. THICKNESS ---------------------------------------------------------------------------------------------------------------------------- ALLOWABLE TEMPERATURE 18 – 35ºC (original paint and Bath paint). ----------------------------------------------------------------------------------------------------------------------------NON VOLATILE IN BATH 40 + 3%. PAINT ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 ltr, 180 ltr.

MAGICRON MO METALLIC BASE 272 – SERI ---------------------------------------------------------------------------------------------------------- JENIS Cat untuk warna metallic dimana cat ini berfungsi sebagai cat dasar yang membentuk metallic. Sebagai bahan dasar digunakan thermosetting acrylic resin dan melamine resin sebagai pengikat. Proses pemanasan dilakukan setelah dilapisi dengan MAGICRON MO CLEAR. ---------------------------------------------------------------------------------------------------------------------------- PEMAKAIN Mobil. ---------------------------------------------------------------------------------------------------------------------------- KEISTIMEWAAN - Pembentukan metalic yang baik. - Keras dan elastis. ---------------------------------------------------------------------------------------------------------------------------- WARNA Dapat dibuat untuk semua warna metallic. ---------------------------------------------------------------------------------------------------------------------------- KEMASAN 20 liter. ---------------------------------------------------------------------------------------------------------------------------- CARA PEMAKAIN Umumnya dengan spray gun biasa. ---------------------------------------------------------------------------------------------------------------------------- THINNER MAGICRON 100 THINNER = 110, 120 Perbandingan cat dengan thinner = 100 : 80 – 100. ---------------------------------------------------------------------------------------------------------------------------- KEKENTALAN SPRAY 12 – 13 detik/NK-2. ---------------------------------------------------------------------------------------------------------------------------- KETEBALAN LAPISAN Sesudah kering 15 – 20 mikron. ---------------------------------------------------------------------------------------------------------------------------- DAYA SEBAR 1 liter 8 – 10 m²/lapis. ---------------------------------------------------------------------------------------------------------------------------- WAKTU TUNGGU Sebelum di oven minimum 10 menit. ---------------------------------------------------------------------------------------------------------------------------- WAKTU PENGERINGAN 150ºC x 30 menit. (sesudah dilapisi MAGICRON MO CLEAR) ---------------------------------------------------------------------------------------------------------------------------- KEPADATAN CAT + 41%. ---------------------------------------------------------------------------------------------------------------------------- KEKENTALAN CAT + 63 KU (25ºC) ---------------------------------------------------------------------------------------------------------------------------- BERAT JENIS + 0.96 (silver metallic) ---------------------------------------------------------------------------------------------------------------------------- DAYA TUTUP Sesudah kering 15 – 20 mikron. ---------------------------------------------------------------------------------------------------------------------------- KETERANGAN Tanpa menggunakan “MAGICRON MO CLEAR” tidak direkomendasikan. ----------------------------------------------------------------------------------------------------------------------------

MAGICRON PCM ENAMEL (Code No. : 275 – series) ---------------------------------------------------------------------------------------------------------- TYPE Magicron PCM is solid paint for to coat, with thermosetting acrylic and melamin resin to increasing the corrosion resistant. Can be used without primer surfacer special for electric equipment. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. High gloss retaintion. 2. Good chemicals resistance. 3. High solid contents. 4. Good corrosion resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Any colour. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 Ltr and 23 kg. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray. ---------------------------------------------------------------------------------------------------------------------------- THINNER Magicron PCM thinner. ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO Up to 10% by volume. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 80 – 100 sec (Iwata NK2 Cup) ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 10 – 20 μ. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME Baking 220ºC + 10ºC in 60 second. ---------------------------------------------------------------------------------------------------------------------------- NON – VOLATILE MATTER + 60% for white colour. ---------------------------------------------------------------------------------------------------------------------------- VISCOSITY + 70 KU (25ºC). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY + 1.27 for white colour. ---------------------------------------------------------------------------------------------------------------------------- HARDNESS H – 2 H (Mitsubishi pencil) ---------------------------------------------------------------------------------------------------------------------------- FINNESS Below of 10 micron. ---------------------------------------------------------------------------------------------------------------------------- HIDING POWER 40 micron max (after dry) ----------------------------------------------------------------------------------------------------------------------------

MAGICRON MO CLEAR ---------------------------------------------------------------------------------------------------------- JENIS Cat lapisan luar untuk warna metallic (MAGICRON MO CLEAR BASE) dimana cat berfungsi sebagai pelindung agar pembentukan metallic tidak teroksidasi dengan udara dan juga untuk mendapatkan daya kilau yang tinggi. Sebagai bahan dasar dipergunakan resin thermosetting acrylic dan bahan pengikat melamine resin, dengan menggunakan pengeringan dengan sistim pemanasan. ---------------------------------------------------------------------------------------------------------------------------- PEMAKAIAN Mobil. ---------------------------------------------------------------------------------------------------------------------------- KEISTIMEWAAN - Mempertinggi daya kilau. - Memperindah permukaan metallic. - Tahan terhadap bahan kimia. - Tidak mudah menguning. - Mempunyai daya tahan cuaca yang baik. ---------------------------------------------------------------------------------------------------------------------------- WARNA Bening. ---------------------------------------------------------------------------------------------------------------------------- KEMASAN 20 liter. ---------------------------------------------------------------------------------------------------------------------------- CARA PEMAKAIN Dispray. ---------------------------------------------------------------------------------------------------------------------------- THINNER MAGICRON 200 THINNER, 210 Perbandingan cat dengan thinner = 100 : 20 – 25. ---------------------------------------------------------------------------------------------------------------------------- KEKENTALAN SPRAY 22 – 25 detik/NK-2. ---------------------------------------------------------------------------------------------------------------------------- KETEBALAN LAPISAN Sesudah kering 30 – 40 mikron. ---------------------------------------------------------------------------------------------------------------------------- DAYA SEBAR Sebelum dioven 10 menit. ---------------------------------------------------------------------------------------------------------------------------- WAKTU PENGERINGAN 150ºC x 30 menit. ---------------------------------------------------------------------------------------------------------------------------- KEPADATAN CAT + 50%. ---------------------------------------------------------------------------------------------------------------------------- KEKENTALAN CAT + 60 KU (25ºC) ---------------------------------------------------------------------------------------------------------------------------- BERAT JENIS + 0.96. ---------------------------------------------------------------------------------------------------------------------------- KEKERASAN CAT H – 2H (pincil Mitsubishi UNI) ----------------------------------------------------------------------------------------------------------------------------

PCM PAINT / KP COLOUR ENAMEL ( Code No: 311 – series ) ---------------------------------------------------------------------------------------------------------- JENIS Cat yang terbuat dari resin Polyester, Melamine dan Epoxy. ---------------------------------------------------------------------------------------------------------------------------- KEGUNAAN Untuk precoating steel dari produk – produk bangunan. ---------------------------------------------------------------------------------------------------------------------------- SIFAT - SIFAT - Mempunyai sifat fisika yang baik. - Mempunyai ketahanan gloss yang baik. - Mempunyai ketahanan cuaca yang baik. ---------------------------------------------------------------------------------------------------------------------------- SPEC STANDAR VISCOSITAS 80 + 10 SEC Ford Cup 4 / 25ºC. BERAT JENIS 1.25 + 0.03. PADATAN 65 + 3%. WARNA Tersedia dalam banyak warna. ---------------------------------------------------------------------------------------------------------------------------- APPLIKASI CARA APLIKASI Barcoater No.16; Natural roll coating. PENGENCER KP Colour No. 1205 Thinner. VISCOSITAS APLIKASI 50 + 20 sec Ford Cup 4 / 25ºC. PERB – PENGENCER 10 – 20 % by weight. TEBAL LAPISAN CAT 15 + 2 μ. WAKTU PENGERINGAN 225ºC x 60”. ---------------------------------------------------------------------------------------------------------------------------- KUALITAS LAPISAN CAT RUBBING (GOSOKAN) (60x) atau lebih. (DENGAN XYLENE) GLOSS / DAYA KILAP 85 < KEKERASAN H < (Mitsubishi Uni) ADHESI 100 / 100 ( 1 x 1 mm x 100 ) BENTURAN 50 / 500 ( cm / gram ) ---------------------------------------------------------------------------------------------------------------------------- KEMASAN 23 Kg. ---------------------------------------------------------------------------------------------------------------------------- TITIK NYALA 43.9ºC. ----------------------------------------------------------------------------------------------------------------------------

ASCA COAT 400 NC BLACK ---------------------------------------------------------------------------------------------------------- TYPE Waterborne epoxy ester paint type for interior and exterior. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Excellent anti corrosion performance. 2. Water soluble and fire safety. 3. Applicable in dipping system. ---------------------------------------------------------------------------------------------------------------------------- USAGE Automobile parts excellent anti corrosion. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION

Air Spray Dipping Thinner D I Water D I Water / Additive : 2/1 Thinning Ratio 10 – 20% 15 – 25% Viscosity 20ºC 60 – 80 sec 40 – 60 sec ---------------------------------------------------------------------------------------------------------------------------- DRYING CHARACTERISTIC

20ºC 50ºC 100ºC Set to Touch 60 minutes 15 minutes - Drying Hard 5 hours 1 hours 10 minutes Baking Oven 90ºC x 20 minutes ---------------------------------------------------------------------------------------------------------------------------- DIPPING TANK CONDITION CHECK Temperature 20 - 32ºC Check 2 time / day Viscosity 40 – 60 sec/NK2 Before production pH 9.0 + 0.5 1 time / day NV 30 + 2 1 time / d ---------------------------------------------------------------------------------------------------------------------------- PAINT CONDITION 1. One component type 2. Color Black 3. Specific Gravity 1.15 + 0.05 4. NV 35 + 3 5. Visc. Supply (KU/25ºC) 75 + 3

PAINT PERFORMANCE SPCC – SD (0.8T) Pretreatment PB # 144 Dipping for 3 minutes and after 3 day for testing.

Test Item Result Thickness (μ) Baking Oven Hardness Adhesion Impact Test Humidity Resistance Salt Spray Test Alkali Resistance Oil Resistance Out Door Test

15 – 25 90ºC x 20 minutes F 100/100 (M-2.5) 0.5 inch x 500 gr x 30 cm 50ºC, 98% RH, 48 hrs 120 hours / max 3mm both side 0.1 N NaOH 20ºC 8 hour ( OK ) 8 hours ( OK ) immer system W-O-M 240 hours

---------------------------------------------------------------------------------------------------------------------------- PAINT COMPARASION

AQUASOL ASCA COAT (1st) ASCA COAT (2 nd) COMPETITORBaking Oven 170ºC x 20 minutes 90ºC x 20 minutes 90ºC x 20 minutes - Chalking Test Max 2 months Max 6 months 6 months -

Salt Spray Test 72 hours 120 hours 240 hours - ISO 14001 Enviromental

Cr content Free Content Content

----------------------------------------------------------------------------------------------------------------------------

EVAPORATOR PAINT ( Code No: 277 – 001 ) ---------------------------------------------------------------------------------------------------------- TYPE Acrylic Modified Epoxy & Melamine resin ---------------------------------------------------------------------------------------------------------------------------- USE 1. Electric appliances, such as refrigerator, evaporator washing machine Air Conditioner. 2. Steel furniture, such as locker, cabinet etc. 3. Building material, such as steel door etc. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Excellent adhesion on Aluminium Substrate. 2. Excellent flexibility properties for bending. 3. Good applicability for all kind of painting machine. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Special order ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray or electrostatic spray. ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 20 up to 30 % by volume. ---------------------------------------------------------------------------------------------------------------------------- THINNER Evaporator Thinner. ---------------------------------------------------------------------------------------------------------------------------- VISCOSITY SPRAY 18 + 2''/NK-2 Cup at 30ºC. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 25 – 40 μ ( depends on color) ---------------------------------------------------------------------------------------------------------------------------- SETTING TIME 10 minutes. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 150ºC x 30 mins. ---------------------------------------------------------------------------------------------------------------------------- NON - VOLATILE 40 – 60% (depends on color). ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 67 + 2 KU (25°C) ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.00 ( depends on color) ---------------------------------------------------------------------------------------------------------------------------- PENCIL HARDNESS H < ( Mitsubishi pencil ) ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 ltr ----------------------------------------------------------------------------------------------------------------------------

KS – 720 PRIMER ( Code No: 143 – xxx ) ---------------------------------------------------------------------------------------------------------- TYPE Phenol Alkyd Resin Primer. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Free form heavy metal Component such as lead, chrome an mercury atc. 2. Fast drying. 3. Good wet on wet applicability. 4. Wide top coats can be applicable acrylic lacquer, phtalic resin enamel and melamin resin enamel can be available. 5. Good adhesion. 6. Good corrosion resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Yellow and Grey. ---------------------------------------------------------------------------------------------------------------------------- PACKAGING 20 kg. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD

Application Method Air Spray Airless Spray Thinner Enamel No.200 Thinner Thinner Ratio 20 – 30 % 15 – 20 %

Apllication viscosity 20 + 2 sec /NK-2 40 + 10 sec/NK – 2 Dry Film Thickness 30 – 40 μ Coverage 100 – 135 g/m² Recoat Interval 20 min – 3 month ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 30 mins. ---------------------------------------------------------------------------------------------------------------------------- NON - VOLATILE 67 + 3%. ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.50 + 0.05 ----------------------------------------------------------------------------------------------------------------------------

RETAN PG 60 NATURAL YELLOW (Code No. : 386 – 164) ---------------------------------------------------------------------------------------------------------- TYPE A weather resisting Polyurethane Enamel based on acrylic polyol resin and polyisocianate hardener. ---------------------------------------------------------------------------------------------------------------------------- USE A top coat finish color for industrial uses. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Excellent gloss and color retention. 2. Excellent durability in chemicals and marine environment. 3. Good applicability. 4. Hight build and heavy duty coatings. 5. Provides hardener, abrasion resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Natural Yellow, etc. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 65 – 70 KU (25ºC) ---------------------------------------------------------------------------------------------------------------------------- NON FOLATILE MATTER 60 + 5%. ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.15 + 0.05. ---------------------------------------------------------------------------------------------------------------------------- PACKING 5 ltr / set 2 packing Base / Hardener. ---------------------------------------------------------------------------------------------------------------------------- THINNER Retan PG 60 Thinner ( 295 – 060 ) ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 40 – 50 % ( Volume ) air spray. 20 – 30 % by airless. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 11 – 13 sec / NK2 cup. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 35 μ – 45 μ. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME SET TO TOUCH 10 minutes. SEMI DRY 4 hours. HARD DRY 6 hours 130ºC. ---------------------------------------------------------------------------------------------------------------------------- OVERCOATING INTERVAL Over Night. TIME ---------------------------------------------------------------------------------------------------------------------------- MIXING RATIO Base / Hardener = 4 /1 ( by volume ) ----------------------------------------------------------------------------------------------------------------------------POT LIFE 3 hour at 30ºC. ----------------------------------------------------------------------------------------------------------------------------

TEMPERATURE RESISTANCE 100ºC (dry) SUPER FTALIT (Code No. : 118 – series) ---------------------------------------------------------------------------------------------------------- TYPE A finish coat based on short oil alkyd resin. ---------------------------------------------------------------------------------------------------------------------------- USE 1. For construction machines. 2. For Industrial machines. 3. For transport machines. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Quilk dry. 2. Good weathering resistance. 3. Good physical property. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Available in many colors. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 78 + 3 KU (25ºC) ---------------------------------------------------------------------------------------------------------------------------- NON FOLATILE MATTER 57 + 3 (white). ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.20 + 0.05 (white). ---------------------------------------------------------------------------------------------------------------------------- PACKING 20 kg. ---------------------------------------------------------------------------------------------------------------------------- THINNER Super Ftalit Thinner ( 294 – 018 ) ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 10 – 30 % by Weight. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 20 – 25 sec / NK2 cup. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 μ – 40 μ. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME SET TO TOUCH 15 minutes at 30°C SEMI DRY 30 minutes at 30°C HARD DRY 5 hours at 30°C ---------------------------------------------------------------------------------------------------------------------------- OVERCOATING INTERVAL Min. 6 hours at 30ºC. Max. 7 days at 30ºC. ----------------------------------------------------------------------------------------------------------------------------

SKZ PRIMER (Code No. : 143 – xxx) ---------------------------------------------------------------------------------------------------------- TYPE A primer coat based on modified alkyd primer with zinc chromate rust preventive pigment. ---------------------------------------------------------------------------------------------------------------------------- USE 1. A primer coat for construction machines. 2. A primer coat for industrial machines. 3. A primer coat for swichboards. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Good rust preventive property. 2. Fast drying. 3. Good compatibility with subsequent coat e.g. Short oil alkyd resin, polyurethane resin enamel. 4. Good Applicability. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Yellow, Grey and Black. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 75 + 2 KU (25ºC) ---------------------------------------------------------------------------------------------------------------------------- NON VOLATILE 71 + 3%. ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.50 + 0.05. ---------------------------------------------------------------------------------------------------------------------------- PACKING 25 kg. ---------------------------------------------------------------------------------------------------------------------------- THINNER KZ Primer Thinner (294-017) ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 10 – 30 % by Weight for air spray. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 20 + 2 sec / NK2 cup. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 μ – 40 μ. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME SET TO TOUCH 10 minutes at 30°C SEMI DRY 20 minutes at 30°C HARD DRY 2 hours at 30°C ---------------------------------------------------------------------------------------------------------------------------- OVERCOATING INTERVAL Over 16 hours at 30ºC. ----------------------------------------------------------------------------------------------------------------------------

KS 720 PRIMER (Code No. : 143 – xxx) ---------------------------------------------------------------------------------------------------------- TYPE Phenol Alkyd Resin Primer. ---------------------------------------------------------------------------------------------------------------------------- USE 1. A primer coat for construction machines. 2. A primer coat for industrial machines. 3. A primer coat for swichboards. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Free form heavy metal Component such as lead, chrome an mercury atc. 2. Fast drying. 3. Good wet on wet applicability. 4. Wide top coats can be applicable acrylic lacquer, phtalic resin enamel and melamin resin enamel can be available. 5. Good adhesion. 6. Good corrosion resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR Yellow, Grey and Black. ---------------------------------------------------------------------------------------------------------------------------- SUPPLY VISCOSITY 82 + 2 KU (25ºC) ---------------------------------------------------------------------------------------------------------------------------- NON VOLATILE 67 + 3%. ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.50 + 0.05. ---------------------------------------------------------------------------------------------------------------------------- PACKING 25 kg. ---------------------------------------------------------------------------------------------------------------------------- THINNER KZ Primer Thinner (294-017) ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 20 – 30 % Air Spray. 15 – 20 % Airless Spray. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 20 + 2 sec / NK2 cup Air Spray 40 + 10 sec / NK2 cup by Airless Spray ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 30 μ – 40 μ. ---------------------------------------------------------------------------------------------------------------------------- DRYING TIME 30 minutes. ---------------------------------------------------------------------------------------------------------------------------- THEORITICAL SPREADING + 5 m²/ Kg / Coat RATE ---------------------------------------------------------------------------------------------------------------------------- OVERCOATING INTERVAL Over 1 hour. TIME ----------------------------------------------------------------------------------------------------------------------------

YK COAT ---------------------------------------------------------------------------------------------------------- TYPE Solid baking enamel based on special thermosetting Acrylic Rosin, crosslinked with Melamine Resin and modified with Epoxy Resin. ---------------------------------------------------------------------------------------------------------------------------- USE Special designed for Zipper. ---------------------------------------------------------------------------------------------------------------------------- CHARACTERISTICS 1. Good chemical Resistance. 2. Excellent Resistance to “Dry Clean” Chemical. 3. Good Corrosion Resistance. ---------------------------------------------------------------------------------------------------------------------------- COLOUR White & Black color, other colors are available. ---------------------------------------------------------------------------------------------------------------------------- APPLICATION METHOD Air spray. ---------------------------------------------------------------------------------------------------------------------------- THINNER YK Coat Thinner. ---------------------------------------------------------------------------------------------------------------------------- PACKING 5 Ltr; 20 Ltr. ---------------------------------------------------------------------------------------------------------------------------- THINNING RATIO 20 – 30 %. ---------------------------------------------------------------------------------------------------------------------------- SPRAY VISCOSITY 18 - 20 sec / NK-2. ---------------------------------------------------------------------------------------------------------------------------- DRY FILM THICKNESS 20 μ + 5 μ. ---------------------------------------------------------------------------------------------------------------------------- BAKING CONDITION 160°C x 20 minutes. ---------------------------------------------------------------------------------------------------------------------------- HARDNESS H – 2H (Mitsubishi UNI Pencil) ---------------------------------------------------------------------------------------------------------------------------- NON VOLATILE 58 + 2% for white color. ---------------------------------------------------------------------------------------------------------------------------- VISCOSITY 68 + 3 KU / 25°C ---------------------------------------------------------------------------------------------------------------------------- SPECIFIC GRAVITY 1.23 + 0.03 for white color.