7
Magic Bullet NutriBullet Pro Activator Replacement This guide will teach you how to remove the activators from your Magic Bullet NutriBullet Pro if you have determined they are faulty. Geschrieben von: Malcolm Smith Fraser Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22 Anleitung Nr: 72307 - Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt. © iFixit — CC BY-NC-SA de.iFixit.com Seite 1 von 7

Magic Bullet NutriBullet Pro Activator Replacement · Schritt 1 — Magic Bullet NutriBullet Pro Disassembly To start the disassembly of the Magic Bullet NutriBullet Pro you will

  • Upload
    others

  • View
    25

  • Download
    0

Embed Size (px)

Citation preview

Magic Bullet NutriBullet Pro ActivatorReplacement

This guide will teach you how to remove the activators from your Magic Bullet NutriBullet Pro if youhave determined they are faulty.

Geschrieben von: Malcolm Smith Fraser

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 1 von 7

EINLEITUNG

If your Magic Bullet NutriBullet Pro won't activate, and you have determined that the activators arethe culprit, follow this guide to replace them. This guide will work to replace all three activators.

WERKZEUGE:Tweezers (1)Phillips #1 Screwdriver (1)Phillips #2 Screwdriver (1)

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 2 von 7

Schritt 1 — Magic Bullet NutriBullet Pro Disassembly

To start the disassembly of the Magic Bullet NutriBullet Pro you will begin from the bottom.

Flip the device over to the bottom.

Unscrew the four 1 cm screws using #2 Phillips Head Screwdriver.

Remove the loose bottom portion of the device by pulling up from the bottom.

Schritt 2

Unscrew the two 1 cm screws holding down the power cord using the #2 Phillips HeadScrewdriver.

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 3 von 7

Schritt 3

Unscrew the three 1 cm screws on the device circled on the screws pictures using the #1 PhilipsHead Screwdriver.

Lift off the grey plastic piece off.

Slide off the silver metal piece.

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 4 von 7

Schritt 4

Flip the device over.

Remove the three rubber seals covering the screws by pulling the components upward with thetweezer.

Unscrew the three 16 mm screws using the #2 Phillips Head Screwdriver.

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 5 von 7

Schritt 5

Pull off the casing from the device.

Schritt 6 — Activator

Remove the two 8 mm screws using the #2 Phillips Head Screwdriver while holding the activator inplace.

There are three separate activators with two screws each.

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 6 von 7

To reassemble your device, follow these instructions in reverse order.

Schritt 7

Be careful of the spring flying out.

Lift activator out of the Magic Bullethousing while holding the spring withtweezers.

Magic Bullet NutriBullet Pro Activator Replacement Entwurf: 2016-12-22Anleitung Nr: 72307 -

Dieses Dokument wurde am 2019-10-13 09:53:57 AM (MST) erstellt.

© iFixit — CC BY-NC-SA de.iFixit.com Seite 7 von 7