Upload
vongoc
View
213
Download
0
Embed Size (px)
Citation preview
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Made to Measure Window Furnishings
Innovative Solutions to Add Value for your Customer
Sales Product Training Module 10.8.4
MotorLITE WIRE FREE Motorised Internal Roller Blinds
Revision C. 12th December 2014
jpm-speed.com
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
MotorLITE Internal Blinds Overview Operation & Advantages
– 12 Volt Li-Ion Rechargeable battery powered motor inside top tube
– Up to 3 months operation on a single full battery charge (~ 84 open/close cycles)
– Wireless installation: No extra costs for an electrician to connect cables to motor
– Easy installation using standard brackets . No holes to cut in architrave for cables
– Easy to program RTS motor with top, bottom & intermediate electronic limits
– Low noise operation
– 45mm diameter top tube
– LIFT up to 6m2 of single or linked roller blinds
– 800mm minimum width motorized blind
– 22mm light gap on motor side
– Cord-free child safety solution
– 2 year motor warranty
– A TUV certified battery charger provided with each motorized blind order
– Optional stick on window solar panel to recharge Li-Ion battery
– Optional Single Channel & 15 Multi-Channel remote transmitters
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
MotorLITE WIRE FREE Motors Cost Effective & Add Value to a Solution
WIRE FREE Motorised Blind provide LOW INSTALLED COST,
ease of operation, increased security, energy efficiency & comfort to
a home.
>10,000 Wire Free Battery powered motors sold in Australia in
2013-14 & sales are increasing
Motorised blinds offer a superior solution by removing unsightly
chains for blinds over wide sliding doors
Cord-free child safety solution
Add value to your offer & differentiation with motorised blinds.
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Internal Blinds Motorisation MotorLITE Motor Technical Specifications
o Electrical Specifications
- 12 Volt x 0.87 Amps D.C.
- Total Power = 10.2 Watts
o Motor Dimensions
- Motor is 25mm Outside Diameter x 450mm long – tube adaptors to suit a 45mm tube
- Motor head thickness is 17mm
- Approximate motor weight is 0.4Kgs*
o Blind Lifting Capacity
- Lift up to 6 sq. metres of linked blinds
- Motor Output speed = 40 RPM
- Maximum Torque = 1.1Nm
o Motor Modes of Operation
- 433.92 +/-100 MHz Radio Controlled
- Top, bottom & intermediate position limits electronically set using remote transmitter
o Remote Transmitter
- 1 or 15 Channel Remote with an indoors transmitting range up to 35 metres. Each channel can control up to 20
receivers
- Battery life up to 3 years if the handset is only used a few times per day.
Europe CE Certificate
Germany TUV Certificate
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Product Information Component Information
Remote Transmitter Options
Motor Head Ports
Motor head setting button
Battery Recharging
45mm Motor Tube Adaptors (Crown & Wheel)
Roller Blind Brackets
Standard 45 mm Single Blinds
Independent Linked Blinds
Dependant Linked Blinds
Double Linked Bracket Blinds
240 volts / 12 volts Battery Recharger
Solar Cell Battery Recharger
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Product Information MotorLITE – 2 RTS Transmitter Options
Power supply: 12 V battery
Each channel can control up to 20 motor receivers
Transmitter range outdoors = 200 metres
Transmitter range indoors = 35 metres
DC1600 Single Channel DC1602 15 Channel
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Product Information Push Button Functions on 15 Channel Remote Transmitter
The 15 CHANNEL Remote Control Handset features 5 control
buttons; UP, DOWN, LEFT, RIGHT & STOP.
The UP & DOWN buttons control the blind’s vertical movement .
The STOP button has 2 functions
Stop the blind going up or down before tripping the limit
Push down the stop button for 3 seconds to lower the blind to
an intermediate down position, where programmed
The LEFT & RIGHT buttons are for channel selection or settings.
One handset is capable of programming as follows;
1) Operate up to 15 motors individually; one on each channel
2) Operate up to 14 motors individually on channels 1 to 14.
1) Channel 15 can be programmed to group &
simultaneously operate channels 1 to 14
3) Operate up to 15 GROUPS of motors; each group is operated
independently of each other.
1) Each group can contain UP TO 20 motors
RIGHT
DOWN
LEFT
UP
STOP
CHANNEL INDICATOR
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Product Information Motor Head Ports Motor Battery Recharging Socket & Power Reset Button
Motor Battery Recharging Socket
Blank hole (not used)
Motor head setting button
Used to “PAIR” with RTS remote or to
change motor rotation
Press using a small diameter Phillips screw
drive or other small diameter tool to programme
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Product Information 45mm Diameter Tube Adaptors - Crown & Wheel
45 Dia. Drive Wheel 45 Dia, Bracket Adaptor Plate
2 - 4 gauge CSK Head Screws
2.9 dia x 12 long 45 Dia. Crown Tube Adaptor
450mm Long Motor Cartridge
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Control System Options Dependent Linked Blinds
• Control system where up to 2 blinds are linked together & operated
together by 1 motor
• Note - If 2 separate motors used in same window the motor limit
tolerance is +/-5mm & bottom bar positions may vary
• Maximum blind area that may be linked together is 6 sq. metres
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Control System Options Double Brackets - 2 Blinds installed on one set of brackets
• Control system where 2 Blinds , using 45mm diameter tube,
are installed on one set of brackets
1. Viewscreen blind for the daytime
2. Block out blind for night time privacy – fit closest to the
window for smaller light gaps
• Suited for installation in deeper reveals
• For shallow reveals consider single brackets.
– Reveal fit block out blind
– Face fit sunscreen blind
• 45mm tube adaptors available to fit 38mm “B” type brackets
• 45mm tube adaptors available to fit 45mm “L” type brackets
• Double linked “B” type brackets may also be motorized, using
45mm diameter tube
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
240 volts / 12 volts Battery Charger Tested & Certified for Australian Use
6 metre Cable Length
EMC tested
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Optional Extra Feature Compact Solar Cell Battery Charger
Compact Solar Cell 300 Wide x 65 Deep x 3 Thick
Mount Behind Top Tube to Glass Window Pane
Current Tested Fixing Method is Using Double Sided Tape
Alternative Mounting Method Under Development
Fixed Behind Top Tube to Window Architrave Using Brackets
Not Available for Sale Until Tested, Approved & Released
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Installation
1. NO holes to drill in architraves for cable
2. No electrical wiring
3. No Molex plugs to connect
4. 45mm diameter top tube only
5. Motor adaptors for 38 & 45 brackets
6. Compatible with standard, dual & linked roller blind brackets
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Blinds
1. Overview
– MotorLITEOperation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Child Safety - Corded Internal Window Coverings
Trade Practices Regulations 2010
Important for Safe Installation & Operation
In the sales process inform each customer of December 2010
ACCC National Safety Standards & our requirement to fit safety
labels and for our installer to fit safety cleats.
– We PROVIDE a warning label on the chain or cord to highlight
the risk of strangulation to children.
– Sales consultant should recommend to keep cots and furniture
away from window coverings, cords/chains, to install & use
safety devices that remove the cord loop or reduce access to
cords
– Motorised blinds are child safe as there are no chains.
– It is not necessary to drill holes to screw safety cleats
onto the window frame or wall.
X a
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Motorisation MotorLITE Programming Overview
Easy programming methodology
Online iPhone access to video programming guides (December 2014)
www.jpm-speed.com
https://itunes.apple.com/us/app/jpm-speed/id777393612?ls=1&mt=8
Electronic set limits in motor head using RTS remote transmitter
Intermediate (mid point) optional limit setting function
Individual, multi channel or group motor control
The factory will set the limit 5 - 10mm shorter than the drop so blind
stops before hitting sill or floor.
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Single Remote Programming Example
1. If you use a Single Remote all 4 blinds will
operate at the same time.
Multi Remote Programming Example
1. If you use a Multi Remote you are able to set UP TO
20 motorised blinds to operate individually, using
separate channels.
2. Using a separate (unused) channel to Group all 4
blinds to operate at the same time.
Blind A Blind B
Blin
d D
Blin
d C
(Ch 5)
Group Control
(Ch 4) (Ch 3)
(Ch 2) (Ch 1)
Blind A Blind B
Blin
d D
Blin
d C
One Channel
Receiver
Group Control
Motorisation MotorLITE Programming Options
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Programming Options Multi Channel Remote to Individually Control 3 Windows
INDIVIDUAL CONTROL
Channel 1 – left hand window
Channel 2 – centre window
Channel 3 – right hand window
GROUP CONTROL
Up to 20 individual motor receivers
Channel 4 – All 3 widows together
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Programming Pairing a Remote to a Motor
1. Remove the cover on the back of the remote transmitter to be ready to access the
Left Hand P2 programming button.
2 Scroll Multi Channel remote using LEFT & RIGHT buttons to select required
channel
3 Press & hold in the motor head setting button on the underside of the motor,
using a small diameter screw driver or small diameter tool, for approximately 3
seconds, until motor jogs down & up & emits a beep
IMPORTANT: The time interval between pressing each programming function must
be within 5 seconds of resetting, otherwise the motor will drop out of programming
mode and restore the original state
FOR CLOCKWISE MOTOR ROTATION
1. Press the Left Hand P2 button, on the back of the remote, TWICE
2. Press and hold the DOWN button
FOR ANTI CLOCKWISE MOTOR ROTATION
1. Press the Left Hand P2 button, on the back of the remote, TWICE
2. Press and hold the UP button
If you are using a Multi Channel remote you may select another channel to PAIR
to a GROUPING channel by repeating steps 4 & 5 clockwise or steps 6 & 7 for
anti clockwise rotation
Motor will JOG down & up then emit 1 beep to confirm pairing
Wait 30 seconds for motor to JOG to confirm timed out of program mode back to normal operation
Not Active
P2
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Programming Reversing Motor Rotation
1. Scroll Multi Channel remote using LEFT & RIGHT buttons to select
required channel
2. Press & hold in the motor head setting button on the underside of the
motor, using a small diameter screw driver or small diameter tool, for
approximately 3 seconds, until motor jogs down & up & emits a beep
FOR CLOCKWISE MOTOR ROTATION turning ANTI CLOCKWISE
3.Press the Left Hand P2 button, on the back of the remote, TWICE
4.Press and hold the UP button
Reverse Up or DOWN buttons for opposite rotation change
Not Active
P2
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Programming Grouping 2 or More Motors to a Single Channel
The most efficient method to program 2 or more motors (a GROUP) on 1
channel is to set the group channel during PAIRING function previously
detailed. An example for grouping 3 motors together is as follows;
1. Pair individually
NOTE: If there are 2 motorised blinds in one window the motors should be fitted with
one motor in the left hand and the other motor in the right hand corners of the
opening. You will need to reverse the rotation of one of the motors after pairing
2. MULTI CHANNEL & GROUPING – 2 or More Blinds
a. Pair motor 1 to channel 1 then group channel 4
b. Pair motor 2 to channel 2 then group channel 4
c. Pair motor 3 to channel 3 then group channel 4
Press Left Hand P2 button TWICE and Press and hold the DOWN button
until both motorised blinds power down together
Not Active
P2
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
1. Scroll Multi Channel remote using LEFT & RIGHT buttons to select required channel
SETTING UPPER LIMIT
2. Press UP / DOWN buttons to bring blind to the required UP position
3. Press the Left Hand P2 button, on the back of the remote, ONCE
4. Press the UP button ONCE
5. Press the Left Hand P2 button, on the back of the remote, ONCE. Motor will emit a BEEP
6. Press STOP 5 times to complete programming the UP limit setting. Motor will JOG to confirm
SETTING BOTTOM LIMIT
1. Press DOWN button
2. Quickly press Left Hand P2 button & blind will automatically JOG down in micro stepping mode
3. Press STOP when position reached
4. Press STOP 5 times when required down position is reached to memorise programming the DOWN limit setting. Motor will JOG to confirm
SETTING INTERMEDIATE LIMIT
When the UP & DOWN limits have been set an optional intermediate limit setting can be programmed 1. Lower blind to desired position
2. Press the Left Hand P2 button, on the back of the remote, ONCE
3. Press the STOP button ONCE. Wait at least 1 second for motor to emit 1 beep
4. Press the STOP button ONCE. Wait at least 1 second for motor to emit 3 beeps to confirm setting
The intermediate position is activated by the customer pressing & holding the STOP button for approximately 3 seconds
Programming Setting Top, Bottom & Intermediate Limits
Not Active
P2
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
DELETING CHANNELS & PAIRING
1. Remove the cover on the back of the remote transmitter to be ready to access the Left Hand P2 programming button.
2. Scroll Multi Channel remote using LEFT & RIGHT buttons to select required channel to be deleted
3. Press the Left Hand P2 button ONCE on the back of the remote. The receiver will BEEP once to acknowledge
4. Press STOP button ONCE
5. Press the Left Hand P2 button ONCE. The receiver will BEEP 4 times to confirm all channels and remote transmitters are deleted from that motor receiver
DELETING LIMITS
1. Scroll Multi Channel remote using LEFT & RIGHT buttons to select required channel to be deleted
2. Remove the cover on the back of the remote transmitter to be ready to access the Left Hand P2 programming button.
3. Press the Left Hand P2 button ONCE on the back of the remote. The receiver will BEEP once to acknowledge
4. Press DOWN button ONCE
5. Press the Left Hand P2 button ONCE on the back of the remote. The receiver will BEEP once to acknowledge
Multi Channel Remote Programming DELETING CHANNEL and RESETTING LIMITS
Not Active
P2
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Programming Programme a Second Remote Transmitter
This function is available to program a second remote once the first remote has
been programmed to operate a motorised roller blind.
1. Remove the cover on the back of the first remote transmitter that has already been
programmed to be ready to access the Left Hand P2 programming button.
2. Press the Left Hand P2 button, on the back of the first remote ONCE
3. WAIT until you hear the motor BEEP once to confirm signal received
4. Press the Left Hand P2 button, on the back of the first remote again ONCE
5. WAIT until you hear the motor BEEP once to confirm signal received
6. Remove the cover on the back of the second remote transmitter that has NOT been
programmed to be ready to access the Left Hand P2 programming button
7. Press the Left Hand P2 button, on the back of the second remote, ONCE
8. Wait until you hear the motor BEEP 7 TIMES to confirm signal received
9. Your second remote transmitter is now programmed & ready for use
P2
Not Active
P2
Not Active
First Remote Already Programmed
Second Remote to Programme
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Common Problems, Causes & Solutions
Problem Possible Cause Possible Solution
2 motors installed with both motors in
middle (head to head ) do not operate
using RTS transmitter
Electrical magnetic fields interfering
with radio waves
Install motors on opposite end of roller
blinds so they are as far away from
each other as possible
One of two (2) blinds 1,900mm wide x
2,200mm drop installed with 1 motor
does not work
Total blind area is 8.36sq. metres
exceeds maximum lift specification
area of 6 sq. metres
Install separate motors for each blind
Abnormal sound during roller blind in
operation
Top tube is too long resulting in the
mechanism being to tight between the
brackets
Check tube length & cut shorter to
eliminate too tight a fit condition
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Roller Blinds Review of This Modules Key Issues
Innovative Solutions to Add Value for your Customer
• High Quality MotorLITE motor with a 2 year manufacturers parts warranty
• >10,000 Wire Free Battery powered motors sold in Australia in 2013-14 & sales are increasing
• MotorLITE is competitively priced installed solution to help us add value & grow our share of this market
• Very quiet in operation
• LIFT up to 6m2 of single or linked blinds
• Installation
– 45mm diameter tube operating systems
– Compatible with standard, dual & linked roller blind brackets
– NO holes to drill in architraves for cable
– No electrical wiring & no Molex plugs to connect
• Programming options – simple to program with electronically set Top, Intermediate & Bottom limits.
Video programming guides available on line at jpm-speed.com
• Child safe solution – not necessary to drill holes to screw safety cleats onto the window frame or wall.
• Common problems
Structured Product Education & Evaluation Development - eLearning
jpm-speed.com
Sales Product Training Contents for Module 10.8.4 – MotorLITE Motorised Roller Blinds
1. Overview
– MotorLITE Operation & Advantages
– Technical Specifications
2. Product Information
3. Installation
4. Child Safety Guidelines
5. Programming
6. Common Problems, Causes & Solutions
7. Summary
8. Knowledge & Learning Assessment Test