Made In The USA - Home | Dasco · PDF file... follow up with a pin punch to drive the pin or key out. ... dascopro.com • 800-327-2690 Made In The USA Pin Punch Item # Description

Made In The USA

2dascopro.com • 800-327-2690 Made In The USA

History.......................................................................................... 3

Cold.Chisels................................................................................. 4

Punches....................................................................................... 7

Masonry...................................................................................... 14

Floor/Electrician/Wood............................................................... 21

Nail.Sets..................................................................................... 23

TargetGuard®.Tools..................................................................... 24

Bars............................................................................................ 25

Hammer,.Sledge.&.Replacement.Handles................................. 29

Angle.Finders............................................................................. 30

Miscellaneous............................................................................. 31

Kits............................................................................................. 33

Assortments............................................................................... 36

Contact.Information.................................................................... 37

Table of Contents


DASCO PRO, Inc. has been in the forged hand tool industry since 1922. Our company has been a leader of innovation, new packaging and superior technology.

In 1984, DASCO merged with angle finder manufacturer Pro Products and formed DASCO PRO, Inc. Today DASCO PRO, Inc. offers the highest quality line of striking tools, a complete line of angle finders, fiberglass replacement handles, and boundary marker/reflectors.

Our production facilities include three manufacturing plants in Rockford, IL. totaling 216,000 square feet. The upset head on the largest striking tools was developed and trademarked as Targethead® tools in 1948. This feature gives a large surface to strike and allows protection to the hand holding the tool.

The DASCO PRO TargetGuard® tool holder is featured on all of our best selling Targethead® struck tools. The TargetGuard® offers a 3 ¾” circle of protection against glancing blows and missed hits. Our TargetGuard® is made of a special blend of durable molded plastic that is permanently force-fit around the shaft of select striking tools and is a DASCO PRO exclusive. It features a full 360-degree handhold for a firm, comfortable grip.

We pad print our tools with epoxy ink that is easily legible to the customer, giving size, tool name, model number, warnings and “Made in USA” information. All products have an individual UPC code. Our company is EDI integrated.

DASCO PRO is a member of the American Hardware Manufacturers Association.

Our Story


Cold ChiselsDASCO PRO cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.

Item # Description Length UPC Pack.CARDED 018371- . 400-0. 1/4”.COLD.CHISEL. 4-7/8”. 040006. 3

. 401-0. 5/16”.COLD.CHISEL. 5-1/4”. 040105. 3

. 402-0. 3/8”.COLD.CHISEL. 5-5/8”. 040204. 3

. 405-0. 1/2”.COLD.CHISEL. 6-3/8”. 040501. 3

. 406-0. 5/8”.COLD.CHISEL. 6-3/4”. 040600. 3

. 408-0. 3/4”.COLD.CHISEL. 7-1/8”. 040808. 3

. 413-0. 7/8”.COLD.CHISEL. 7-1/2”. 041300. 3

. 417-0. 1”.COLD.CHISEL. 7-7/8”. 041706. 3

BULK 018371- . 400. 1/4”.COLD.CHISEL. 4-7/8”. 004008. 3

. 401. 5/16”.COLD.CHISEL. 5-1/4”. 004015. 3

. 402. 3/8”.COLD.CHISEL. 5-5/8”. 004022. 3

. 405. 1/2”.COLD.CHISEL. 6-3/8”. 004053. 3

. 406. 5/8”.COLD.CHISEL. 6-3/4”. 004060. 3

. 408. 3/4”.COLD.CHISEL. 7-1/8”. 004084. 3

. 413. 7/8”.COLD.CHISEL. 7-1/2”. 004138. 3

. 417. 1”.COLD.CHISEL. 7-7/8”. 004176. 3

CO

LD C

HISE

LS

Made In The USA

Item # Description Length UPC Pack.CARDED 018371- . 441-0. 1/2”.LONG.COLD.CHISEL. 12”. 044103. 3

. 410-0. 3/4”.LONG.COLD.CHISEL. 12”. 041003. 3

. 415-0. 7/8”.LONG.COLD.CHISEL. 12”. 041508. 3

. 419-0. 1”.LONG.COLD.CHISEL. 12”. 041904. 3

. 337-0. 1-1/4”.X.12”.FLAT.UTILITY.CHISEL. 12”. 033701. 3

. . . .

BULK 018371- . 441. 1/2”.LONG.COLD.CHISEL. 12”. 004411. 3

. 407. 5/8’.LONG.COLD.CHISEL. 12”. 004077. 3

. 410. 3/4”.LONG.COLD.CHISEL. 12”. 004107. 3

. 411. 3/4”.X.18”.LONG.COLD.CHISEL. 12”. 004114. 3

. 415. 7/8”.LONG.COLD.CHISEL. 12”. 004152. 3

. 419. 1”.X.12”.LONG.COLD.CHISEL. 12”. 004190. 3

. 420. 1”.X.18”.LONG.COLD.CHISEL. 12”. 004206. 3

. 337. 1-1/4”.FLAT.UTILITY.CHISEL. 12”. 000352. 3

5dascopro.com • 800-327-2690

DASCO PRO long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.

Long Cold ChiselsC

OLD

CH

ISELS

DASCO PRO cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.

Item # Description Pieces UPC Pack.CARDED 018371- . 29. 4.PIECE.KIT. 4. 502368. 3. .

. 44. 3.PIECE.KIT. 3. 000635. 3

Cold Chisel Kits


The DASCO PRO Cold Chisel with TargetGuard® is designed for shearing nuts, bolts, rivets and other materials. Its large target head striking area reduces mushrooming and protects hands from missed hits.

Cold Chisels With TargetGuard®

Item # Description Length UPC Pack. 018371- G410. 3/4”.LONG.COLD.CHISEL.W/TG. 12”. 001038. 3

. G417. 1”.COLD.CHISEL.W/TG. 7-7/8”. 001069. 3

. G419. 1”.LONG.COLD.CHISEL.W/TG. 12”. 001076. 3

. G337. 1-1/4”.FLAT.UTILITY.CHISEL.W/TG. 12”. 001014. 3

CO

LD C

HISE

LS


Center Punches

Item # Description Length UPC Pack.CARDED 018371- . 530-0. 1/4”.CENTER.PUNCH. 4”. 053006. 3

. 531-0. 5/16”.CENTER.PUNCH. 4-1/2”. 053105. 3

. 532-0. 7/16”.CENTER.PUNCH. 5”. 053204. 3

. 534-0. 1/2”.CENTER.PUNCH. 5-1/2”. 053402. 3

. . . .

BULK 018371- . 528. 3/16”.CENTER.PUNCH. 4”. 503051. 3. .

. 529. 5/32”.CENTER.PUNCH. 4”. 503068. 3

. 530. 1/4”.CENTER.PUNCH. 4”. 005302. 3

. 531. 5/16”.CENTER.PUNCH. 4-1/2”. 005319. 3

. 532. 7/16”.CENTER.PUNCH. 5”. 005326. 3

. 534. 1/2”.CENTER.PUNCH. 5-1/2”. 005340. 3

DASCO PRO Center punches have a precision ground point for making accurate hole starting easier. Made of high carbon steel that has been heat treated. Use on metals softer than their point.

PUN

CH

ES


Prick Punches

Item # Description Length UPC Pack.CARDED 018371- . 539-0. 1/4”.PRICK.PUNCH. 4”. 053907. 3

. 540-0. 5/16”.PRICK.PUNCH. 4-1/2”. 054003. 3

. 541-0. 3/8”.PRICK.PUNCH. 5”. 054102. 3

. . . .

BULK 018371- . 539. 1/4”.PRICK.PUNCH. 4”. 005395. 3

. 540. 5/16”.PRICK.PUNCH. 4-1/2”. 005401. 3

. 541. 3/8”.PRICK.PUNCH. 5”. 005418. 3

DASCO PRO Prick punches are used to mark and scribe work pieces. Made of high carbon steel that has been heat treated.Use on metals softer than their points.

PUN

CH

ES

Starter PunchesStarter punches are used to loosen frozen pins and keys.

Item # Description Length UPC Pack.CARDED 018371- . 562-0. 3/32”.STARTER.PUNCH. 5-1/2”. 056205. 3

BULK 018371- . 562. 3/32”.STARTER.PUNCH. 5-1/2”. 005623. 3


Solid Punch

Item # Description Length UPC Pack.CARDED 018371- . 564-0. 1/8”.SOLID.PUNCH. 5”. 502399. 3

. 565-0. 5/32”.SOLID.PUNCH. 5-1/2”. 502405. 3

. 566-0. 3/16”.SOLID.PUNCH. 7”. 502412. 3

. 568-0. 7/16”.SOLID.PUNCH. 9”. 502429. 3

. 569-0. 1/4”.SOLID.PUNCH. 7”. 502436. 3

.

BULK 018371- . 560. 1/16”.SOLID.PUNCH. 4-1/2”. 503075. 3

. 561. 3/32”.SOLID.PUNCH. 4-1/2”. 503082. 3

. 563. 7/32”.SOLID.PUNCH. 3-1/4”. 503099. 3

. 564. 1/8”.SOLID.PUNCH. 5”. 502894. 3

. 565. 5/32”.SOLID.PUNCH. 5-1/2”. 502900. 3

. 566. 3/16”.SOLID.PUNCH. 7”. 502917. 3

. 568. 7/16”.SOLID.PUNCH. 9”. 502924. 3

. 569. 1/4”.SOLID.PUNCH. 7”. 502931. 3

. 572. 5/16”.SOLID.PUNCH. 6-1/4”. 503105. 3

PUN

CH

ES

DASCO PRO Solid Punches are made of heat treaded high carbon steel. It is a perfect tool for loosening frozen or tight pins and keys or knocking out rivets. Once loosened, follow up with a pin punch to drive the pin or key out. It can be used on any softer metal.


Pin Punch

Item # Description Length UPC Pack.CARDED 018371- . 581-0. 3/32”.PIN.PUNCH. 5-1/2”. 058100. 3

. 582-0. 1/8”.PIN.PUNCH. 5-1/2”. 058209. 3

. 583-0. 5/32”.PIN.PUNCH. 5-1/2”. 058308. 3

. 584-0. 3/16”.PIN.PUNCH. 5-1/2”. 058407. 3

. 588-0. 7/32”.PIN.PUNCH. 6”. 000666. 3

. 589-0. 1/4”.PIN.PUNCH. 6”. 058902. 3

. 590-0. 5/16”.PIN.PUNCH. 6”. 059008. 3

. 592-0. 1/16”.PIN.PUNCH. 4-1/2”. 059206. 3

. . . .

BULK 018371- . 581. 3/32”.PIN.PUNCH. 5-1/2”. 005814. 3

. 582. 1/8”.PIN.PUNCH. 5-1/2”. 005821. 3

. 583. 5/32”.PIN.PUNCH. 5-1/2”. 005838. 3

. 584. 3/16”.PIN.PUNCH. 5-1/2”. 005845. 3

. 588. 7/32”.PIN.PUNCH. 6”. 005883. 3

. 589. 1/4”.PIN.PUNCH. 6”. 005890. 3

. 590. 5/16”.PIN.PUNCH. 6”. 005906. 3

. 591. 3/8”.PIN.PUNCH. 8-1/2”. 503044. 3

. 592. 1/16”.PIN.PUNCH. 4-1/2”. 005920. 3

DASCO PRO Pin punches are used to remove a pin or key. Use a pin punch that is one size smaller than the pin being driven toprevent damage to the side walls containing the pin.

PUN

CH

ES


Long Pin Punch

Item # Description Length UPC Pack.CARDED 018371- . 593-0. 3/16”.LONG.PIN.PUNCH. 9”. 000680. 3

. 594-0. 1/4”.LONG.PIN.PUNCH. 9”. 000697. 3

. 595-0. 5/16”.LONG.PIN.PUNCH. 9”. 000703. 3

. 596-0. 3/8”.LONG.PIN.PUNCH. 9”. 000710. 3

. 597-0. 1/2”.LONG.PIN.PUNCH. 8-1/2”. 000727. 3

. . . . .

BULK 018371-

. 593. 3/16”.LONG.PIN.PUNCH. 9”. 000185. 3

. 594. 1/4”.LONG.PIN.PUNCH. 9”. 000192. 3

. 595. 5/16”.LONG.PIN.PUNCH. 9”. 000208. 3

. 596. 3/8”.LONG.PIN.PUNCH. 9”. 000215. 3

. 597. 1/2”.LONG.PIN.PUNCH. 8-1/2”. 000222. 3

PUN

CH

ES

DASCO PRO Long Pin Punches are specifically designed for removing pins and keys in work area where extra length is needed. The punches are machined to exacting standards for years of reliable, durable service.


Roll Pin Punch

Item # Description Length UPC Pack.CARDED 018371- . 253-0. 1/8”.ROLL.PIN.PUNCH. 4”. 000536. 3

. 255-0. 3/16”.ROLL.PIN.PUNCH. 4-1/2”. 000550. 3

. 258-0. 5/16”.ROLL.PIN.PUNCH. 6”. 000581. 3

. . . . .

BULK 018371- . 250. 1/16”.ROLL.PIN.PUNCH. 3”. 000383. 3

. 252. 3/32”.ROLL.PIN.PUNCH. 3-1/2”. 000406. 3

. 253. 1/8”.ROLL.PIN.PUNCH. 4”. 000413. 3

. 254. 5/32”.ROLL.PIN.PUNCH. 4-1/2”. 000420. 3

. 255. 3/16”.ROLL.PIN.PUNCH. 4-1/2”. 000437. 3

. 256. 7/32”.ROLL.PIN.PUNCH. 5”. 000444. 3

. 257. 1/4”.ROLL.PIN.PUNCH. 5-1/2”. 000451. 3

. 258. 5/16”.ROLL.PIN.PUNCH. 6”. 000468. 3

PUN

CH

ES

Precision machined Roll Pin Punches are specifically designed to remove spring/roll pins. The heat treated point has a rounded nib to center the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal. The punch shaft allows for a long, straight removal of the pin without damaging the pin wall material.DASCO PRO offers a range of punch point sizes to accurately fit the pin size to be removed. All Roll Pin Punches are made of high strength steel for years of reliable, durable service.


Item # Description Length UPC Pack.CARDED 018371- . 601-0. 1/8”.DRIFT.PUNCH. 8”. 060103. 3

. 602-0. 5/32”.DRIFT.PUNCH. 10”. 000734. 3

. 603-0. 3/16”.DRIFT.PUNCH. 9”. 060301. 3

. 604-0. 3/16”.DRIFT.PUNCH. 11”. 502481. 3

. 606-0. 1/4”.DRIFT.PUNCH. 12”. 060608. 3

. . . .

BULK 018371- . 601. 1/8”.DRIFT.PUNCH. 8”. 060103. 3

. 602. 5/32”.DRIFT.PUNCH. 10”. 000734. 3

. 603. 3/16”.DRIFT.PUNCH. 9”. 006033. 3

. 606. 1/4”.DRIFT.PUNCH. 10”. 006064. 3

. 608. 5/16”.DRIFT.PUNCH. 12”. 006088. 3

. 610. 3/8”.DRIFT.PUNCH. 10”. 502955. 3

. 611. 1/2”.DRIFT.PUNCH. 10”. 502962. 3

. 612. 7/32”.DRIFT.PUNCH. 10”. 502979. 3

. 614. 7/32”.DRIFT.PUNCH. 12”. 502986. 3

. 701. 3/16”.DRIFT.PUNCH. 16”. 502993. 3.

Drift/Alignment PunchesDASCO PRO drift punches feature a long, tapered point to aid in aligning and sizing holes in various materials. Made in USA of high carbon steel that has been heat treated to provide many years of use.

PUN

CH

ES

Item # Description Length UPC Pack.BULK 018371- . 702. 5/16”.LONG.DRIFT.PUNCH. 18”. 503013. 3

. 705. 3/8”.LONG.DRIFT.PUNCH. 21”. 503037. 3.

Long Drift/Alignment Punches


Item # Description Length UPC Pack.CARDED 018371- . 434-0. 2-1/2”.BRICK.SET. 7”. 043403. 3

. 435-0. 3”.BRICK.SET. 7”. 043502. 3

. 436-0. 3-1/2”.BRICK.SET. 7”. 043601. 3

. 437-0. 4”.BRICK.SET. 7”. 043700. 3

. 439-0. 5”.BRICK.SET. 7”. 043908. 3

. . . .

BULK 018371- . 434. 2-1/2”.BRICK.SET. 7”. 004343. 3

. 435. 3”.BRICK.SET. 7”. 004350. 3

. 436. 3-1/2”.BRICK.SET. 7”. 004367. 3

. 437. 4”.BRICK.SET. 7”. 004374. 3

. 439. 5”.BRICK.SET. 7”. 004398. 3

Brick SetsDASCO PRO brick sets are designed for scoring, cutting and trimming bricks and blocks. Made of high carbon steel that has been heat treated, these chisels feature a sharp, durable cutting edge for years of use.

MA

SON

RY


Item # Description Length UPC Pack.CARDED 018371- . 332-0. 1-1/4”.MASONS.CHISEL. 7-1/2”. 033206. 3

. 333-0. 1-3/4”.MASONS.CHISEL. 7-1/2”. 033305. 3

. 334-0. 2-1/4”.MASONS.CHISEL. 7-1/2”. 033404. 3

. 335-0. 2-3/4”.MASONS.CHISEL. 7-1/2”. 033503. 3

. . . .

BULK 018371- . 332. 1-1/4”.MASONS.CHISEL. 7-1/2”. 003322. 3

. 333. 1-3/4”.MASONS.CHISEL. 7-1/2”. 003339. 3

. 334. 2-1/4”.MASONS.CHISEL. 7-1/2”. 003346. 3

. 335. 2-3/4”.MASONS.CHISEL. 7-1/2”. 003353. 3

Mason ChiselsDASCO PRO Mason Chisels are ideal for cutting or shaping brick, cement block, cinder block, or trimming excess mortar.

MA

SON

RY


Item # Description Length UPC Pack.CARDED 018371- . 1232-0. 1-1/4”.TOOTH.CHISEL. 7-1/2”. 123204. 3

. 1233-0. 1-3/4”.TOOTH.CHISEL. 7-1/2”. 123303. 3

. 1235-0. 2-3/4”.TOOTH.CHISEL. 7-1/2”. 123501. 3

. . . .

BULK 018371- . 1232. 1-1/4”.TOOTH.CHISEL. 7-1/2”. 012324. 3

. 1233. 1-3/4”.TOOTH.CHISEL. 7-1/2”. 012331. 3

. 1235. 2-3/4”.TOOTH.CHISEL. 7-1/2”. 012355. 3

DASCO PRO Tooth chisels have sharp teeth for accurately cutting and shaping soft stone.

Tooth Chisels

MA

SON

RY

The DASCO PRO Flat Utility chisel is used for cutting metal and other materials softer than the heat-treated cutting edge.

Flat Utility Chisels

Item # Description Length UPC Pack.CARDED 018371- . 337-0. 1-1/4”.FLAT.UTILITY.CHISEL. 12”. 000352. 3

BULK 018371- . 337. 1-1/4”.FLAT.UTILITY.CHISEL. 12”. 033701. 3


The DASCO PRO Concrete chisel is designed to break up concrete floors, sidewalks and paving slabs when an air hammer would be impractical.

Concrete Chisels

Item # Description Length UPC Pack.CARDED 018371- . 480-0. 3/4”.CONCRETE.CHISEL. 12”. 048002. 3

. . . .

BULK 018371- . 480. 3/4”.CONCRETE.CHISEL. 12”. 004800. 10

MA

SON

RY

DASCO PRO Plugging chisels are specially designed with tapered blade to clean mortar joints easily without binding. They also feature DASCO PRO’s exclusive TargetHead™ design that increases the striking area and reduces spalling and mushrooming.

Item # Description Length UPC Pack.BULK 018371- . 476. 3/16”.PLUGGING.CHISEL. 10”. 004763. 10

Plugging Chisel


Item # Description Length UPC Pack.CARDED 018371- . 3621-0. 1/4”.STAR.DRILL. 12”. 362108. 3

. 3635-0. 1/2”.STAR.DRILL. 12”. 363501. 3

. 3643-0. 5/8”.STAR.DRILL. 12”. 364300. 3

. 3651-0. 3/4”.STAR.DRILL. 12”. 365109. 3

. . . .

BULK 018371- . 3621. 1/4”.STAR.DRILL. 12”. 036214. 3

. 3635. 1/2”.STAR.DRILL. 12”. 036351. 3

. 3643. 5/8”.STAR.DRILL. 12”. 036436. 3

. 3651. 3/4”.STAR.DRILL. 12”. 036511. 3.

Star DrillsDASCO PRO Star drills are designed for drilling holes in masonry surfaces. Made of high carbon steel that has been heat treated.

MA

SON

RY


Item # Description Length UPC Pack.. . . . 018371-. G333. 1-3/4”.MASONS.CHISEL.W/TG. 7-1/2”. 000987. 3

. G334. 2-1/4”.MASONS.CHISEL.W/TG. 7-1/2”. 000994. 3


. G435. 3”.BRICK.SET.W/TG. 7”. 001090. 3

. G436. 3-1/2”..BRICK.SET.W/TG. 7”. 001106. 3

. G437. 4”.BRICK.SET.W/TG. 7”. 001113. 3

. G337. 1-1/4”.FLAT.UTILITY.CHISEL.W/TG. 12”. 001014. 3

. G480. 3/4”.CONCRETE.CHISEL.W/TG. 12”. 001182. 3

Brick Chisel Concrete ChiselMason Chisel Flat Utility Chisel

MA

SON

RY

DASCO PRO Mason Chisels are ideal for cutting or shaping brick, cement block, cinder block, or trimming excess mortar. The target head has been designed to help protect hands from missed hits and to reduce mushrooming from repeated blows.

Masonry Chisels WithTargetGuard®


Item # Description Length UPC Pack.BULK 018371- . 777. 12.OZ.BRICK.HAMMER. 12.OZ.. 007771. 10

. 877. 24.OZ.BRICK.HAMMER. 24.OZ.. 008778. 10

DASCO PRO Brick Hammers are used for setting and cutting bricks, masonry tile, concrete blocks, plus chipping mortar from materials. Made with a long, thin tapered blade that can be kept sharp by filing orby using a hand stone.

Brick HammersM

ASO

NR

Y

DASCO PRO Tapered Jointers are simple but useful tools to make smooth horizontal and vertical mortar joints with either a V or round pattern.

Item # Description Length UPC Pack.BULK 018371- . ..933. RD.&.V.TAPERED.JOINTER. 1/2”. 009331. 10

. ..935. 1/2.RD.TAPERED.JOINTER. 1/2”. 009355. 10

. 1935. TAPERED.JOINTER.5/8.RD. 5/8”. 019354. 10

. 2935. TAPERED.JOINTER.3/4.RD. 3/4”. 029353. 10

Tapered Jointers


The DASCO PRO Floor chisel can be used for removing tongue and groove flooring. These chisels have a strong, thin cutting blade for rough cutting and trimming hard and soft woods.

Floor Chisels

Item # Description Length UPC Pack.CARDED 018371- . 471-0. 2”.FLOOR.CHISEL. 10”. 047104. 3

. 472-0. 2-1/2”.FLOOR.CHISEL. 10”. 047203. 3

. 473-0. 3”.FLOOR.CHISEL. 11”. 047302. 3

BULK 018371- . 471. 2”.FLOOR.CHISEL. 10”. 004718. 3

. 472. 2-1/2”.FLOOR.CHISEL. 10”. 004725. 3

. 473. 3”.FLOOR.CHISEL. 11”. 004732. 3

FLOO

R/E

LEC

TRIC

IAN

/WO

OD

Item # Description Length UPC Pack.CARDED 018371- . 470-0. 2-3/4”.ELECTRICIANS.CHISEL. 8”. 047005. 3

. . . .

BULK 018371- . 470. 2-3/4”.ELECTRICIANS.CHISEL. 8”. 004701. 3

Electrician ChiselsThe electrician’s chisel is designed with a shorter handle to enable electricians to work in tight, crowded areas. These chisels have a strong, thin cutting blade for rough cutting and trimming wood and building materials.


FLOO

R/E

LEC

TRIC

IAN

/WO

OD

The DASCO PRO chisels are designed for cutting, shaping, trimming and removing building materials. The shorthandle on electrician chisels get into small, tight areas.

Item # Description Length UPC Pack.. . . . 018371-. G472. 2-1/2”.FLOOR.CHISEL.W/TG. 10”. 001151. 3

. G473. 3”.FLOOR.CHISEL.W/TG. 11”. 001168. 3

. G470. 2-3/4”.ELECTRICIANS.CHISEL.W/TG. 8”. 001137. 3.

Floor/Electrician Chisels with TargetGuard®


DASCO PRO Nail Sets are designed for countersinking finishing nails in hard or soft wood. A knurled grip ensures tip placement on non-hardened finish nails.

Nail Sets

Item # Description Length UPC Pack.CARDED 018371- . 796-0. 1/32”.PRO.NAIL.SET. 5”. 502351. 5

. 76. 3.PIECE.PRO.NAIL.SET.KIT. 5”. 502344. 5

. 696-0. 1/32”.NAIL.SET.(BLACK.OXIDE). 4”. 500319. 5



. 77. 3.PC.NAIL.SET.KIT.(BLACK.OXIDE). 4”. 500340. 5

. . . . .

BULK 018371- . 696. 1/32”.NAIL.SET.(ZINC.PLATED). 4”. 500784. 5

. 697. 2/32”.NAIL.SET.(ZINC.PLATED). 4”. 500791. 5

. 698. 3/32”.NAIL.SET.(ZINC.PLATED). 4”. 500807. 5

Nail Set Black Oxide Nail Set Zinc Plated

Pro Nail Set Kit

NA

IL SETS


Item # Description Length UPC Pack.. . . . 018371-.. G410. 3/4”.LONG.COLD.CHISEL.W/TG. 12”. 001038. 3

. G417. 1”.COLD.CHISEL.W/TG. 7-7/8”. 001069. 3

. G419. 1”.LONG.COLD.CHISEL.W/TG. 12”. 001076. 3




. G435. 3”.BRICK.SET.W/TG. 7”. 001090. 3

. G436. 3-1/2”.BRICK.SET.W/TG. 7”. 001106. 3

. G437. 4”.BRICK.SET.W/TG. 7”. 001113. 3

. G472. 2-1/2”.FLOOR.CHISEL.W/TG. 10”. 001151. 3

. G473. 3”.FLOOR.CHISEL.W/TG. 11”. 001168. 3

. G470. 2-3/4”.ELECTRICIANS.CHISEL.W/TG. 8”. 001137. 3

. G480. 3/4”.CONCRETE.CHISEL.W/TG. 12”. 001182. 3

. G337. 1-1/4”.FLAT.UTILITY.CHISEL.W/TG. 12”. 001014. 3.

.

TAR

GE

TGU

AR

D® TO

OLS

The TargetGuard® offers a 3.75 in. circle of protection against glancing blows and missed hits.Made of a special blend of durable, molded material that is permanently force-fit around the shaft of the tool.Features a full 360° hand hold for a firm, comfortable grip.

Brick Chisel Concrete ChiselMason Chisel Flat Utility Chisel

Floor/Electrician Chisel Cold ChiselLong Cold Chisel

TargetGuard® Tools


DASCO PRO small pry bars are designed for professionals and homeowners alike. Our small bars have a variety of nail slots for pulling small nails, tacks and gun nails. They have sharp edges for prying, pulling and scraping.

Small Bars

Lil’ Pro Bar

7-1/2” Ultra Bar II

Pry Bar

Item # Description Length UPC Pack.CARDED 018371-.

. 222-0. 5-1/2”.LIL’.BAR. 5-1/2”. 022200. 5

. 227-0. 7-1/2”.ULTRA.BAR.II. 7-1/2”. 502313. 5

. 2231-0. 9-1/2”.TRIM./.PRY.BAR. 9-1/2”. 501972. 5

BULK 018371- . 222. 5-1/2”.LIL’.BAR. 5-1/2”. 002226. 5

. 227. 7-1/2”.ULTRA.BAR.II. 7-1/2”. 502443. 5

. 2231. 9-1/2”.TRIM/PRY.BAR.-.CARDED. 9-1/2”. 502450. 5

BA

RS


BA

RSThe DASCO PRO pry bars include a wide range of prying, ripping,

nail pulling bars. Designed and manufactured in the USA with high carbon, heat treated American steel.

Pry Bars

Item # Description Length UPC Pack

121 18” NAIL PULLER/PRY BAR 18” 501316 3

140 15” PRO BAR 15” 001403 3

160 20” PRY BAR W/ROLL HEAD 20” 502580 3

226 12” WRECKING BAR 12” 501613 4

210 18” WRECKING BAR 18” 501453 4

211 24” WRECKING BAR 24” 501460 4

212 30” WRECKING BAR 30” 501477 4

213 36” WRECKING BAR 36” 501484 4

231 17-3/4” STRAIGHT RIPPING BAR 17-3/4” 002318 3

232 17-3/4” 90 DEGREE RIPPING BAR 17-3/4” 002325 3

631 14” SPARTACUS BAR 14” 502030 4

632 24” SPARTACUS BAR 24” 502047 4

633 36” SPARTACUS BAR 36” 502054 4

635 30” ULTRA BAR 30” 502078 4

640 24” SHINGLE RIPPER 24” 006408 3

3471 10-1/2” HEX MOLDING TOOL 10-1/2” 034715 3

Shingle Ripper

Spartacus Bar

I-Beam Pry Bar

Ripping BarWrecking Bar


DASCO PRO nail pullers feature a variety of nail pulling slots. Sharp V slots bite in the nail shank for easy nail removal.Designed and manufactured in the USA with high carbon,heat treated American steel.

Nail Pullers

Item # Description Length UPC Pack.CARDED 018371- . 134-0. 11”.DOUBLE.END.NAIL.CLAW.. 11”. 013406. 3

BULK . . 018371-. 120. 12”.I-BEAM.NAIL.PULLER.BAR. 12”. 501309. 3

. 130. 9”.NAIL.CLAW.BAR. 9”. 001304. 3

. 132. 12”.NAIL.CLAW.BAR. 12”. 001328. 3

. 134. 11”.BULK.DBLE.END.NAIL. 11”. 001342. 3

. 221. 11-1/2”.CLAW.BAR.W/HANDLE. 11-1/2”. 501576. 3

BA

RS

Double End Nail Puller

Nail Puller Bar

Nail Claw Bar

I-Beam Nail Puller


BA

RSThe DASCO PRO Finishing bars are designed for pulling, prying and removing trim and molding.

Sharp V slots pull finish nails and pneumatic gun nails with ease.

Finishing Bars

Molding Bar

9” Nail Puller

Item # Description Length UPC Pack.CARDED 018371- . 100-0. 9”.NAIL.PULLER. 9”. 502214. 4

. 102-0. 12”.NAIL.PULLER. 12”. 502238. 5

. 103-0. 8”.MOLDING.BAR. 8”. 502245. 4

. 101-0. 10”.MOLDING.PRY.BAR. 10”. 502221. 4

BULK . . 018371-. 100. 9”.NAIL.PULLER. 9”. 501668. 5

. 102. 12”.NAIL.PULLER. 12”. 501675. 5

. 101. 10”.MOLDING.PRY.BAR. 10”. 501705. 5


Hammers & Sledges

Item # Description UPC Pack. 018371- . ED61. 3.LB.DRILLING.HAMMER.W/FIBERGLASS.&.VINYL.HANDLE,.10”. 502627. 4

. ED7. 4.LB.DRILLING.HAMMER.W/FIBERGLASS.HANDLE,.10”. 502634. 4

. ED71. 4.LB.DRILLING.HAMMER.W/FIBERGLASS.&.VINYL.HANDLE,.10”. 502641. 4

. ED72. 4.LB.DRILLING.HAMMER.W/WOOD.HANDLE,.10”. 502658. 4

. ED8. 4.LB.BLACKSMITH.HAMMER.W/FIBERGLASS.HANDLE,.16”. 502665. 4

. ED9. 4.LB.ENGINEER.HAMMER.W/WOOD.HANDLE,.16”. 502672. 4

. S1. 8.LB.SLEDGE.HAMMER.W/HEAVY.DUTY.FIBERGLASS.HANDLE,.32”. 502689. 1

. S1A. 8.LB.SPLITTING.MAUL.W/FIBERGLASS.HANDLE,.36”. 502696. 1

. S2. 6.LB.DOUBLE.FACE.SLEDGE.W/FIBERGLASS.HANDLE,.34”. 502702. 1


. S31. 2.5.LB.DOUBLE.FACE.SLEDGE.W/FIBERGLASS.&.VINYL.HANDLE,.14”. 502726. 4



.

.

HA

MM

ER

, SLED

GE

& R

EPLA

CE

ME

NT H

AN

DLE

S

DASCO PRO fiberglass handles give your customers the toughness and durability they want for their striking tools. We pultrude up to 175 rovings of fiberglass per handle into a smooth, strong handle - many times tougher than wood. The waterproof, non-warping and non-corrosive features of fiberglass assures customer satisfaction. Each handle replacement kit comes with instructions, 2 part epoxy resin, stick and mixing cup.

Replacement Handles

Item # Description Length UPC Pack.. 881. 36”.SLEDGE-SPLITTING.MAUL.HANDLE. 36”. 000400. 4

. 882. 36”.SINGLE.BIT.AXE.HANDLE. 36”. 000417. 4

. 884. 36”.PICK/MATTOCK..HANDLE. 36”. 000431. 4

. 885. 36”.AXE./.SLEDGE./.MAUL.HANDLE. 36”. 000608. 4

. 887. 15”.ENGINEER/BLACKSMITH.HANDLE. 15”. 000622. 4

. 888. 36”.DOUBLE.BIT.AXE.HANDLE. 36”. 000639. 4

. 700. EPOXY.ADHESIVE.A.&.B. GLUE. 000394. EA


Item # Description Length UPC Pack.. AF100. ANGLE.FINDER. 2-3/4”. 100007. 10

. AF100M. ANGLE.FINDER.WITH.MAGNET. 2-3/4”. 100809. 10

. AF100-2VM. ANGLE.FINDER.2.VIALS.&.MAGNET. 2-3/4”. 102988. 10

. AF200M. ANGLE.FINDER.WITH.MAGNET. 2-3/4”. 200806. 10

. AF200VM. ANGLE.FINDER.W/.VIAL.&.MAGNET. 2-3/4”. 202985. 10

. AF300. ANGLE.FINDER. 4”. 300001. 10

. AF300-2V. ANGLE.FINDER.W/.2.MAGNETS. 4”. 300803. 10

. AF700M. ANGLE.FINDER.WITH.MAGNET. 4”. 700009. 10

. AF700VM. ANGLE.FINDER.WITH.VIAL.AND.MAGNET. 4”. 700801. 10

. AF30. ANGLE.FINDER.ATTACHMENT. 1”. 301114. EA

. I1100-2VM. INCLINOMETER.W/2.VIALS.&.MAGNET. 3”. 110020. EA

Angle FindersDASCO PRO angle finders are molded of high impact plastic and allow the user to read any angle instantly and accurately from 0° to 90° in any quadrant. Accurate to within 1/2 of 1°. Not affected by magnetic fields, cold or heat. Angle and grade chart on back shows angles in degrees and converts them to pitch per inch and pitch per foot. Available with optional features such as magnetic base, V-groove sides for easy use on round surfaces, plumb and level vials.

AN

GLE

FIND

ER

S

AF200MAF100

AF700VM1100 Inclinometer AF700M

AF300


A handy, economical tool for both the contractor and do-it-your-selfers, the DASCO PRO Giant Circle Beam Compass lets you scribe accurate circles up to 10 ft. in diameter or larger using a 1/2” O.D. dowel rod, PVC or rigid metal tubing as the beam.

Item # Description Length UPC Pack.CARDED 018371- . 1405. BEAM.COMPASS.W/.ROD. 12”. 000840. 3

. 1400. BEAM.COMPASS.NO.ROD. Adjustable. 014007. 3

Giant Circle Beam CompassM

ISCE

LLAN

EO

US

Item # Description Length UPC Pack.CARDED 018371- . 431-0. 7”.SCRATCH.AWL.-.CARDED. 7”. 043106. 3

. . . .

BULK 018371- . 431. 7”.SCRATCH.AWL.. 7”. 043102. 3

The DASCO PRO 7 in. Scratch Awl is a 1-piece forged steel tool designed to start holes in soft wood and scribe or mark wood and other soft materials.

Scratch Awl-One Piece Drop Forged


Item # Description Length UPC Pack.. 663. WHITE.MARKER.W/RED.&.BLUE.TAPE. 4’. 000073. 36

. 664. YELLOW.MARKER.W/WHITE.TAPE. 4’. 000080. 36

. 665. ORANGE.MARKER.W/WHITE.TAPE. 4’. 000097. 36

. 667. CAUTION.POLE.W/CAUTION.TAPE.CLIP. 4’. 000424. 20

.

The DASCO PRO SnowPole® is used to mark driveways, culverts, roadways, hazards and other areas. We offer a variety of different options, including a strip of highly reflective tape for 360° night time visibility. Markers feature a durable fiberglass rod, which will withstand the elements and abuse. but flexible enough to bend and return to its original position. It will not bend out of shape like metal or aluminum markers. We offer a eye catching pyramid display to merchandise all the Snow Poles.

SnowPole® Driveway MarkersM

ISCE

LLAN

EO

US


Kits

Kit # Description UPC Pack. 018371- 9 14 PC PUNCH & CHISEL KIT W/POUCH 502870. 1 . 1.-.Center.Punch.-.531-5/16”. . 3.-.Solid.Punch.-.564-1/8”,.565-5/32”,.566-3/16”. . 1.-.Starter.Punch.-.562-3/32”. . 4.-.Pin.Punch.-.581-3/32”,.582-1/8”,.584-3/16”,.589-1/4”. . 5.-.Cold.Chisel.-.405-1/2”,.406-5/8”,.408-3/4”,.413-7/8”,.417-1”. . .

10 18 PC PUNCH & CHISEL KIT W/POUCH 502887. 1. . 1.-.Center.Punch.-.531-5/16”. . 3.-.Solid.Punch.-.564-1/8”,.565-5/32”,.566-3/16”. . 1.-.Starter.Punch.-.562-3/32”. . 4.-.Pin.Punch.-.581-3/32”,.582-1/8”,.584-3/16”,.589-1/4”. . 5.-.Cold.Chisel.-.402-3/8”,.405-1/2”,.406-5/8”,.408-3/4”,.413-7/8”. . 3.-.Alignment.Punch.-.601-1/8”,.603-3/16”,.606-1/4”. . 1.-.Drift.Punch.-.608-5/16”

12 3 PC ALIGNMENT KIT W/POUCH 502870. 3. . 601-1/8”,.602-5/32”,.604-3/16”

13 5 PC PUNCH & CHISEL KIT W/POUCH 502887. 1. . 2.-.Cold.Chisel.-.405-1/2”,.406-5/8”. . 1.-.Solid.Punch.-.565-5/32”. . 1.-.Pin.Punch.-.584-3/16”. . 1.-.Center.Punch.-.532-7/16”

14 8 PC PUNCH & CHISEL KIT W/POUCH 502511. 1. . 1.-.Center.Punch.-.531-5/16”. . 1.-.Solid.Punch.-.565-5/32”. . 3.-.Pin.Punch.-.582-1/8”,.584-3/16”,.589-1/4”. . 3.-.Cold.Chisel.-.402-3/8”,.405-1/2”,.406-5/8”

15 12 PC PUNCH & CHISEL KIT W/POUCH 502528. 1. . 1.-.Prick.Punch.-.540-5/16”. . 2.-.Center.Punch.-.531-5/16”,.532-7/16”. . 2.-.Solid.Punch.-.564-1/8”,.565-5/32”. . 4.-.Pin.Punch.-.581-3/32”,.582-1/8”,.583-5/32”,.584-3/16”. . 3.-.Cold.Chisel.-.402-3/8”,.405-1/2”,.406-5/8”

KITSDASCO PRO offers the most frequently used and popular items in kits. Professionals and homeowners alike

can grab a kit with confidence that they have the most sought after tool for the job.


16 6 PC PIN PUNCH KIT W/POUCH 502533. 1. . 2.-.Pin.Punch.-.581-3/32”,.581-3/32”.(two.3/32”.in.set). . 4.-.Pin.Punch.-.582-1/8”,.583-5/32”,.584-3/16”,.589-1/4”

17 5 PC COLD CHISEL KIT W/POUCH 502542. 1. . 402-3/8”,.405-1/2”,.406-5/8”,.408-3/4”,.413-7/8”

18 5 PC ROLL PIN PUNCH KIT W/POUCH 502559. 1. . 253-1/8”,.254-5/32”,.255-3/16”,.256-7/32”,.257-1/4”

. 22 6 PC PIN PUNCH 000628. 3

. . 592-1/16”,.582-1/8”,.583-5/32”,.584-3/16”,.589-1/4”,.590-5/16”

. 23 4 PC PIN PUNCH 502597. 3

. . 581-3/32”,.582-1/8”,.583-5/32”,.584-3/16”

. . . 29 4 PC PUNCH & CHISEL 502368. 3. . 2.-.Cold.Chisel.-.402-3/8”,.408-3/4”. . Pin.Punch.-.582-1/8”. . Starter.Punch.-.562-3/32”. .. 30 5 PC PUNCH & CHISEL 310000. 3. . 2.-.Cold.Chisel.-.402-3/8”,.408-5/8”. . .. . Pin.Punch.-.582-1/8”. . .. .. Starter.Punch.-.562-3/32”. . .. .. Center.Punch.-.532-7/16”. . . 31 6 PC PUNCH & CHISEL 501262. 3. . 2.-.Cold.Chisel.-.405-1/2”,.408-3/4”. . .. .. 1.-.Center.Punch.-.531-5/16”. . .. . 2.-.Pin.Punch.-.581-3/32”,.582-1/8”. . .. . 1.-.Drift.Punch.-.603-3/16”. . . 32 9 PC PUNCH & CHISEL 501279. 3. . 2.-.Cold.Chisel.-.405-1/2”,.408-3/4”. . .. .. 1.-.Center.Punch.-.531-5/16”. . .. . 1.-.Prick.Punch.-.541-3/8”. . .. . 3.-.Pin.Punch.-.581-3/32”,.592-1/16”,.582-1/8”. . .. . 2.-.Drift.Punch.-.601-1/8”,.603-3/16”. . . 33 3 PC STARTER/MARKING PUNCH 000826. 3. .. 1.-.Center.Punch.-.531-5/16”. . 1.-.Starter.Punch.-.562-3/32”. . 1.-.Prick.Punch.-.541-3/8”

KITS


. . . 34 3 PC SMALL PIN PUNCH KIT 502184. 3. .. 592-1/16”,.582-1/8”,.583-5/32”. . . 35 3 PC LARGE PIN PUNCH KIT 502191. 3. .. 582-1/8”,.584-3/16”,.589-1/4”. . . 43 3 PC COLD CHISEL 502764. 3. .. 401-5/16”,.402-3/8”,.405-1/2”

. 44 3 PC COLD CHISEL 000635. 3

. . 401-5/16”,.406-5/8”,.408-3/4”

. . . 76 3 PC PRO NAIL SET (PRO GRIP) 502344. 6.. . 796-1/32”,.797-2/32”,.798-3/32”. . . 77 3 PC NAIL SET (BLACK OXIDE) 500340. 5. . 696-1/32”,.697-2/32”,.698-3/32”. . . 88 12 PC PUNCH & CHISEL KIT 501149. 3. . 3.-.Cold.Chisel.-.401-5/16”,.406-5/8”,.408-3/4”. . 1.-.Prick.Punch.-.541-3/8”. . 1.-.Center.Punch.-.530-1/4”. . 3.-.Pin.-.592-1/16”,.582-1/8”,.583-5/32”. . 3.-.Pin.-.584-3/16”,.589-1/4”,.590-5/16”. . 1.-.Scratch.Awl.-.431-7”.Long. . . 90 2 PC BAR KIT 502757. 2. .. 1.-.7.5”.Ultra.Bar.II. . 1.-.9”.Trim/Pry.Bar. . . 91 3 PC SMALL BAR KIT 502375. 4. . 1.-.5.5”.LiL’.Bar. . .. . 1.-.7.5”.Ultra.Bar.II. . .. . 1.-.9”.Trim/Pry.Bar. . . 92 2 PC BAR KIT 502566. 3. . 24”.Spartacus.Bar. . 11”.Double.End.Nail.Puller. . . 93 3 PC BAR KIT 502573. 3. . 15”.Pro.Bar. . 9.-.1/2”.Pry.Bar/Scraper. . 5.-.1/2”.LiL’.Bar. . .

KITS


Assortments Item # Description UPC Pack.. 7001. 24.PC.COLD.CHISEL.. . 070010. 1

. 7003. 24.PC.CENTER/PRICK.PUNCH.. . 070034. 1

. 7004. 24.PC.PIN.PUNCH.. . 070041. 1

. 7007. 12.PC.FLOOR/ELECT..CHISEL. . 070072. 1

. 7008. 12.PC.MASONS.CHISEL.. . 070089. 1

. 7009. 15.PC.LONG.COLD.CHISEL.. . 070096. 1

. 7010. 15.PC.BRICK.SET.. . 070102. 1

. 6014. 12.PC.BAR.. . 060141. 1

. 7200. 69.PC.MASTER.. . 072007. 1

. 8665. 144.PC.ULTRAFLECTOR.MARKER. . 641599600204. 1

ASSO

RTM

EN

TS


Contact Us

DASCO PRO, Inc.340 Blackhawk Park AvenueRockford, IL 61104

Toll free (800) 327-2690Phone: (815) 962-3727Fax (815) 962-4972

Sales / Customer Service Office (815) 962-3727 ext 209

Customer Service Office(815) 962-3727 ext 210

Documents

Made In The USA - Home | Dasco · PDF file... follow up with a pin punch to drive the pin or key out. ... dascopro.com • 800-327-2690 Made In The USA Pin Punch Item # Description