MADE IN CHINA LITTLE GIANT TUFF-N-LITE, ENGLISH, AS-NZS, 150KG, 4’, 5’ & 6’ MODELSLABEL LOCATION DRAWING v1 10.20 (15364-440, 15365-440, 15366-440)

2. 83604x x1(place between top cap and right hinge)

11. Notice label x1(See table below):

(place just below platform)

1. 83603x x1(place between top cap and left hinge)

5. 83607x x2(place just below hinge on inside flange of rail, with words facing

center of ladder)

4. 83606x x1(place between platform and right hinge)

9. 83608 x1(center label on bottom

back brace)

3. 83605x x1(place between platform and left hinge)

6. 83500 x1(place centered between swage and

hinge, along the ridge in the rail)

7. 84132x x1(place just below swage along

the ridge in the rail)

8. 84133x x1(place just below swage along

the ridge in the rail)

83603x CHINALABEL, WARNING, PROPER SELECTION, SINGLE-SIDED STEPLADDER, PLATFORM LADDER, AS-NSZ, A, ENG 1.75” X 5.25”x183604x CHINALABEL, WARNING, PROPER SELECTION, SINGLE-SIDED STEPLADDER, PLATFORM LADDER, AS-NSZ, B, ENG 1.75” X 5.25”x183605x CHINALABEL, WARNING, PROPER SET-UP & USE, SINGLE-SIDED STEPLADDER, AS-NSZ, A, ENG 1.75” X 8.00”x183606x CHINALABEL, WARNING, PROPER SET-UP & USE, SINGLE-SIDED STEPLADDER, AS-NSZ, B, ENG 1.75” X 7.50”x183607x CHINALABEL, PINCH POINT, NARROW SPREADER GROOVE, AS-NZS 0.38” X 4.25”x2

84132x CHINALABEL, TITLE, TUFF-N-LITE, AS-NZS, RH 1.12” X 15.50”x184133x CHINALABEL, TITLE, TUFF-N-LITE, AS-NZS, LH 1.12” X 15.50”x1

83608 CHINALABEL, DO NOT CLIMB, AS-NZS, ENG 0.63” X 4.25”x1

NOTICE LABEL DEPENDS ON MODEL:83610x CHINALABEL, NOTICE, AS-NZS, TUFF-N-LITE, 150KG, 4', 15364-440, ONE-YEAR, MADE IN CHINA, ENG 1.75” X 5.00”x183611x CHINALABEL, NOTICE, AS-NZS, TUFF-N-LITE, 150KG, 5', 15365-440, ONE-YEAR, MADE IN CHINA, ENG 1.75” X 5.00”x1

P/N1234

6 83500 CHINALABEL, WARNING, MISUSE OF A LADDER, AS-NZS, ENG 0.75” X 6.50”x15

78

9

# APPLIEDDESCRIPTION SIZEQTY

81420 CHINALABEL, LOGO, GROUND CUE 5.00” X 1.20”x110

10. 81420x x1(place on front of step, on

the right side )

83612x CHINALABEL, NOTICE, AS-NZS, TUFF-N-LITE, 150KG, 6', 15366-440, ONE-YEAR, MADE IN CHINA, ENG 1.75” X 5.00”x1

111111

Right Side Left Side

Back Side

11. 83617x x1(place just below

4th step)

(8’ models on reverse side)

PAS-MARK LABEL DEPENDS ON DISTRIBUTOR:83560x CHINALABEL, PAS-MARK, LAMFORD 1.50” X 5.25”x11283561x CHINALABEL, PAS-MARK, LGL AUSTRALIA (INTEGRATED) 1.50” X 5.25”x11283562x CHINALABEL, PAS-MARK, SOUTHERN CROSS 1.50” X 5.25”x112

12. PAS-MARK Label x1

(See table below:)(place just below platform)

TUFF-N-LITETM

83752x CHINALABEL, PAS-MARK, MITRE 10 1.50” X 5.25”x11283753x CHINALABEL, PAS-MARK, STAFFY 1.50” X 5.25”x112

MADE IN CHINA LITTLE GIANT TUFF-N-LITE, ENGLISH, AS-NZS, 150KG, 8’ MODELLABEL LOCATION DRAWING v1 10.20 (15368-440)

2. 83604x x1(place just above

5th step)

11. 83617x x1(place just below

4th step)

5. 83607x x2(place just below hinge on inside flange of rail, with words facing

center of ladder)

4. 83606x x1(place between 4th

and 5th steps)

6. 83500 x1(place end of label to line up with third rung

down, along the ridge in the rail)

7. 84132x x1(place just below swage along

the ridge in the rail)

8. 84133x x1(place just below swage along

the ridge in the rail)

10. 81420x x1(place on front of bottomstep, on the right side )

[NOT SHOWN - SAME AS4’, 5’, AND 6’]

Right Side Left Side

(4’, 5’ & 6’ models on reverse side)

12. PAS-MARK Label x1(See table below:)

(place just below platform)

83603x CHINALABEL, WARNING, PROPER SELECTION, SINGLE-SIDED STEPLADDER, PLATFORM LADDER, AS-NSZ, A, ENG 1.75” X 5.25”x183604x CHINALABEL, WARNING, PROPER SELECTION, SINGLE-SIDED STEPLADDER, PLATFORM LADDER, AS-NSZ, B, ENG 1.75” X 5.25”x183605x CHINALABEL, WARNING, PROPER SET-UP & USE, SINGLE-SIDED STEPLADDER, AS-NSZ, A, ENG 1.75” X 8.00”x183606x CHINALABEL, WARNING, PROPER SET-UP & USE, SINGLE-SIDED STEPLADDER, AS-NSZ, B, ENG 1.75” X 7.50”x183607x CHINALABEL, PINCH POINT, NARROW SPREADER GROOVE, AS-NZS 0.38” X 4.25”x2

84132x CHINALABEL, TITLE, TUFF-N-LITE, AS-NZS, RH 1.12” X 15.50”x184133x CHINALABEL, TITLE, TUFF-N-LITE, AS-NZS, LH 1.12” X 15.50”x1

83608 CHINALABEL, DO NOT CLIMB, AS-NZS, ENG 0.63” X 4.25”x1

P/N1234

6 83500 CHINALABEL, WARNING, MISUSE OF A LADDER, AS-NZS, ENG 0.75” X 6.50”x15

78

9

# APPLIEDDESCRIPTION SIZEQTY

81420 CHINALABEL, LOGO, GROUND CUE 5.00” X 1.20”x11083617x CHINALABEL, NOTICE, AS-NZS, TUFF-N-LITE, 150KG, 8', 15368-440, ONE-YEAR, MADE IN CHINA, ENG 1.75” X 5.00”x111

PAS-MARK LABEL DEPENDS ON DISTRIBUTOR:83560x CHINALABEL, PAS-MARK, LAMFORD 1.50” X 5.25”x11283561x CHINALABEL, PAS-MARK, LGL AUSTRALIA (INTEGRATED) 1.50” X 5.25”x11283562x CHINALABEL, PAS-MARK, SOUTHERN CROSS 1.50” X 5.25”x112

9. 83608 x1(center label on bottom

back brace)

Back Side

1. 83603x x1(place just above

5th step)

3. 83605x x1(place between 4th

and 5th steps)

TUFF-N-LITETM

83752x CHINALABEL, PAS-MARK, MITRE 10 1.50” X 5.25”x11283753x CHINALABEL, PAS-MARK, STAFFY 1.50” X 5.25”x112