MACHINERY - McFadden's

MACHINERY GUIDE 2019

2

Bleu venant de la brochure wood product....Sylvain

ME 35TRHigh Frequency Edgebander

Standard features:• Pre-milling: 2 diamond cutters. It allows a very good panel finish and linearity during pre-machining. It is equipped with independent exhaust

hoods and an air blower which cleans the panel from dust and chips. Can remove 0.5mm to 2mm and the cutters are vertically adjustable.• Combined end cutting-rounding unit. During the process of removal of the front and rear exceeding edge, it cuts and rounds the edge in a

single pass. It is possible to work with just the end cutting function. The rounding is not suitable for the processing of solid wood edges.• The trimming unit uses the same high frequency motors found on larger edgebanders. Can trim radius edges up to 2mm thickness and

chamfer thin edges. Changing from radius edge to straight edge is adjusted easily by moving the cutters.• Glue scraping unit included: eliminates any excess flue in the joint between the panel and the edge, improves cleaning.• Brushing unit: uses two independent motors for the cleaning and polishing of the edge.• Device for panel edge heating: Situated in the machine before the gluing unit to heat the panels for better adhesion. The device is

particularly useful in cases of cold working environments and/or panels.• Anti-adhesive unit: Positioned before the pre-milling unit. It prevents the glued from sticking to the panel surfaces through cleaning

operated by two spraying guns and tank for the anti-adhesive liquid.• Glue pot rapid substitution kit – quick release glue pot and double thermoregulation system to manage two different working

temperatures (works well for switching between PUR and regular hotmelt glues).• 7 meters/min feed speed• Electrical requirements: 230v, single phase, 34 amps• Machine weight: 1347 lbs• Required footprint: 57” x 131”• Made in Italy

Feed Speed7m/min

Includes Pre-Milling

BEST SELLER!

Corner Rounding

Single Phase230v

Anti-Adhesive Unit

Quick Release Glue Pot

EDGEBANDERS

COMPLIMENTARY PRODUCTSDescription Item #Jowat HotMelt JI.288.60Jowat PUR HotMelt (Granular) JI.930.94

Scan for More Information and Pricing

3


Radius End Trimming

ME 35T High Frequency Edgebander

Standard features:• Pre-milling unit: complete with 2 diamond tools. It allows a very good panel finish and linearity during pre-machining. Removable

thickness is 0.5mm to 2mm.• Trimming unit: Uses the same High frequency motors found in larger SCM edgebanders offer less vibration and more reliability and

precision. The radius part of the cutter is used to trim 2mm edges. And chamfered thin edges. The straight part is used for trimming wood edges up to 5mm thickness.

• End cutting unit includes radius function. The flat part of the blade will cut thin tape while the curved part will perform the radius function.• Glue scraping unit: eliminates any excess of glue in the joint between the panel and the edge, improving the panel cleaning.• Brushing unit: 2 independent motors to perform the cleaning and polishing action.• Multiple high-frequency motors used throughout this edgebander to reduce vibration and provide the highest quality finish at all times.• Automatic lowering of the glue pot temperature after a temporary non-use of the machine• Automatic edge loading system for rolled edges with shear device for 3mm max. thickness edges and 50mm height• 7 meters/min feed speed• Electrical requirements: 230v, single phase, 34 amps• Machine weight: 1347 lbs• Required footprint: 57” x 131”• Made in Italy

Feed Speed7m/min Includes Pre-Milling

Single Phase230v

COMPLIMENTARY PRODUCTSDescription Item #Jowat HotMelt JI.288.60


4


ME 25 Fully-Automatic Edgebander

Standard features:• Top thick steel pressure beam with rubber coated wheels• Telescopic front support with rollers for the entire machine length• Hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement• Temperature adjustment of the applied glue integrated in the PLC control• Automatic lowering of the glue pot temperature after a temporary non-use of the machine• Automatic edge loading system for rolled edges with shear device for 3mm max. thickness and 50mm max height• Machine can accept 5mm solid strips • End cutting unit: rotating blade for 90° end cutting of front and rear exceeding edge.• The blade alignment with reference to the cutting point is carried out using a new copying device which ensures a constant and precise

cutting under any working condition. • Superposed Trimming Unit. Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting

point. The unit is provided with 72mm diameter, combined cutters: the radius part of the cutter is used to trim 2mm radius edges and chamfered thin edges.

• The straight part of the cutter is used for the trimming of edges in wood up to 5mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.

• Edge scraping unit: It assures an excellent vibration free finish thanks to its high rigidity structure. High working precision thanks to the horizontal and vertical copying pads (with chrome plated surfaces), which assure an accurate positioning of the knives in relation to the cutting point.

• Brushing Unit: With two independent motors for the cleaning and polishing of the edge.Tilted, vertically adjustable motors to optimize the cleaning/polishing action.

• Electrical requirements: 230v, single phase, 36 amps• Machine weight: 926 lbs• Required footprint: 54” x 121”• Made in Italy


3mmMax PVC ThicknessAccepts Solid Strips!

Feed Speed7m/min

Edge Scraping and Buffing

Single Phase230v


5


ME 20 Entry Level, Fully-Automatic Edgebander

Standard features:• Accessible and serviceable from the front of the machine via hood lift and strut. Control panel mounted on the front.• Panel feed by means of a top feeder with high-adherence toothed belt with steel cables inside• Telescopic front support with rollers for the entire machine length• Hot melt glue with quick heat up system and internally Teflon coated to allow an easy glue replacement• Temperature adjustment of the applied glue integrated in the PLC control• Device for automatic recovery of unused glue• Automatic edge loading system for rolled edges with shear device for 2mm maximum thickness edges, and 50mm max height.• End cutting unit: Guillotine end cut at 90°on the leading and trailing edges of the panel. Possibility to exclude the unit through the PLC control.• Adjustable infeed fence with numeric readout of the edge thickness• Automatic lowering of the glue pot temperature after a temporary machine non-use• Superposed Trimming Unit. Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting point. The unit

is provided with 72mm diameter, combined cutters: the radius part of the cutter is used to trim 2mm radius edges and chamfered thin edges.• The straight part of the cutter is used for the trimming of edges in wood up to 5mm. Changing from radius edge to edge in wood is done

easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.• 95 PSI operating pressure• 6 metres/min feed speed• Electrical requirements: 230v, single phase, 22 amps• Machine weight: 685 lbs• Required footprint: 52” x 93”• Made in Italy

Gluepot Included

2mmMax EdgetapeThickness


Feed Speed6m/min Single Phase

230v


6


ME 40 High Productivity Edgebander

Standard features:• Feed track made of pads coated with high friction rubber fixed on a ¾ industrial chain. Sliding of pads on two guideways, one round

and one flat, to ensure straightness of movement and resistance to side loads. • Pre-milling unit: Complete with 2 diamond tools, 80mm diameter. It allows a very good panel finish and linearity during pre-machining. • Hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement• Automatic lowering of the glue pot temperature after a temporary non-use of the machine• Automatic edge loading system for rolled edges with shear device for 2mm max. thickness and 50mm height• Trimming unit: Two high frequency motors and front copying pads (with chrome plated surfaces) and vertical copying discs for an

accurate positioning of tools with reference to the cutting point. The unit is provided with 55,3mm diameter, combined cutters: the radius part of the cutter is used to trim 2mm radius edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5mm. Changing from radius edge done easily by moving the cutters.

• Radius end-cutting function with high-frequency motor. When edgebanding with solid wood, the end cutter will carry out a straight cut only.• Machine includes edge scraping unit, brushing unit, and glue scraping unit all powered via low frequency motors.• Spray-mist device for edge finishing: It is positioned before the glue scraper and improves the panel cleaning and the polishing of the

applied edge.• Spare glue pot included as well as a rapid locking and unlocking device for switching between glue pots. The double thermoregulation

system manages two different working temperatures (ie polyurethane glues).• Anti-adhesive unit: positioned before the pre-milling unit. It prevents the glue sticking to the upper and lower panel surfaces, though

improving the cleaning. This unit is complete with two spraying guns and tank for the anti-adhesive liquid.• 9 metres/min feed speed• Electrical requirements: 600v, 3- phase, 60amp• Machine weight: 2200 lbs• Required footprint: 62”x150”• Made in Italy

Feed Speed9m/min

COMPLIMENTARY PRODUCTSDescription Item #Jowat HotMelt JI.288.60Jowat PUR HotMelt (Granular) JI.930.94

Includes Pre-Milling

Quick Release Glue Pot

Corner Rounding

3-phase600v

Anti-Adhesive Unit

SPECIAL ORDER APPROX 3 MONTH LEAD TIME


7


SLIDING PANEL SAWS

Nova SI X Sliding Panel Saw

Standard features:• 2-axis blade tilting technology: +/- 46 degrees.• Electronic control on LCD display:

∘ Blades unit lifting and tilting∘ Tools date setting with automatic height adjustment with

respect to the tilting∘ 3 separate modes: manual, semi-automatic and automatic

with memory capacity up to 99 programs for cut lists∘ Calculator and hour counter.∘ Ready 3 Up option included

• Cast iron saw unit with lifting system by means of cylindrical bars and tilting on high rigidity sliding side trunnions

• Scoring blade with independent motor• Quick release removable parallel fence

• Anodized aluminum carriage sliding on hardened steel guides• Squaring frame (1200mm x 650mm) includes telescopic

fence, 2 flip over stops with digital readouts, eccentric clamp, swing arm support and idle roller for easy loading.

• 2 blade speeds 3500 or 5000 rpm• Additional products:

∘ Max squaring stroke: 3200mm∘ Angular cutting device with two flip-over stops and

telescopic fence• Electrical requirements: 600 volt, 3 phase• Machine weight: 2,200lbs• Required footprint: 283”x 190”• Made in Italy

3 phase600v

Sliding Table Length10ft

All DigitalControls

11hp


8


SI 400 Nova Sliding Panel Saw

Standard features:• 10’ sliding saw• 9.5 HP main motor• Independent scoring blade motor• Anodized aluminum alloy carriage on hardened steel guides

which are fixed on the carriage by means of mechanical bending system.

• Lifting and tilting of blade by means of hand wheels that are both located on the front side of the machine for ease of use.

• Overhead blade guard with incorporated dust extraction• Maximum squaring capacity: 3200mm• Maximum blade size: 16”• Electrical requirements: 600 volt, 3 phase• Machine weight: 2150 lbs• Required footprint: 283” x 190”• Made in Italy

BEST SELLER!

3 phase600v


Independent Mainand Scoring Blade9.5hp


9


S315 Elite 10’ Sliding Table Saw

Standard features:• Cast iron saw body and extruded anodized aluminum sliding table• 10’ sliding table• Independent scoring blade motor• Telescopic squaring fence with 2 reversible stops• Idle roller to facilitate panel loading and unloading• Additional angular cutting device included with telescopic fence

and 2 flip over stops• Dado blade compatible – includes dado throat plate• 4.8 HP main motor• Maximum Blade size: 16”• Electrical requirements: 230 volt, single phase, 32 amps• Machine weight: 1875 lbs• Required footprint: 283” x 190”• Made in Italy

Single Phase230v


Independent Mainand Scoring Blade4.8hp


10


SC4 Elite 8’ Sliding Table Saw

Standard features:• Cast iron saw body and extruded anodized aluminum sliding table• 8.5’ sliding table• Belt-driven scoring blade off main motor (with external setup)• Telescopic squaring fence with 2 reversible stops• Idle roller to facilitate panel loading and unloading• Additional angular cutting device included with telescopic fence

and 2 flip over stops• Dado blade compatible – includes dado throat plate• 4.8 HP main motor• Accepts 10” or 12” main blade, 5/8 arbor• Electrical requirements: 230 volt, single phase, 24 amps• Machine weight: 1390 lbs• Required footprint: 129” x 188”• Made in Italy


Single Phase230v

Sliding Table Length8.5ft

Scoring BladeIncluded4.8hp

11


ECO 300 D Dust Extractor

Standard features:• Number of Bags: 2• Air flow rate: 3900 m³/h• Fan diameter: 305mm• Bag diameter: 500mm• Exhaust outlets attachments, number/diameter: 3 / 100• Bags capacity: 0,43 m³• Machine Weight: 105 lbs• Required Footprint: 45” x 21”

ECO 300 S Dust Extractor

Standard features:• Number of Bags: 1• Air flow rate: 2550 m³/h• Fan diameter: 300mm• Bag diameter: 500mm• Exhaust outlets attachments, number/diameter: 2 / 100• Bags capacity: 0,15 m³• Machine Weight: 80 lbs• Required Footprint: 32” x 21”

SC2 Classic 5’ Sliding Table Saw

Standard features:• Cast iron saw body and extruded anodized aluminum sliding table• 5’ sliding table• Belt-driven scoring blade off main motor (with external setup)• Telescopic squaring fence with 2 reversible stops• 3.4 HP main motor• Accepts 10” or 12” main blade, 5/8 arbor• Electrical requirements: 230 volt, single phase, 18 amps• Machine weight: 595 lbs• Required footprint: 122” x 152”• Made in Italy


Single Phase230v

Scoring BladeIncluded

PANEL SAWS & DUST EXTRACTORS

3.4hp

REPLACEMENT BAGSSize Package20”x34” x 6mil Package of 10032”x40” x 6mil Package of 100




12


JOINTER/PLANERS & BORING MACHINE

FS41 Classic Jointer/Planer

Standard features:• Precision-milled cast iron tables• 3-knife "Tersa" cutterhead with quick-change knives• Side-mounted jointer fence• Jointer tables open away from the operator• American-style jointer guard (not pictured)• Tool set and operator's manual• Mobility kit• Made in Italy

Jointer Specifications:• Overall table length 70.8"• Jointing width 16"• Cutterhead speed 5,000rpm• Maximum depth of cut 0.125"• Fence tilting 0-45°

Planer Specifications:• Table size 16" x 23.8"• Maximum workpiece thickness 9"• Minimum workpiece thickness 0.118"• Maximum stock remover per pass 1/8"• Feed speed 23fpm• Weight 775 lbs

FS30 C Jointer/Planer

Standard features:• 4.8hp, single-phase, 230v motor• Precision-ground cast iron tables• 3-knife "Tersa" quick-change cutter head• American-style jointer guard• Quick-fitting jointer fence• Jointer tables open away from operator• Two independent dust collection ports• Tool set & owner's manual• Made in Italy

Jointer Specifications:• Overall table length 59.75"• Maximum jointing width 12"• Cutter head speed 5,200 rpm• Fence dimensions 6" x 51"• Fence tilt 0-45°

Planer Specifications:• Table size 12" x 22"• Maximum working thickness 9"• Minimum working thickness 0.125"• Maximum stock removal 1/8"• Feed speed 23fpm• Overall dimensions 32" x 28" x 59"• Base dimensions 26" x 19"• Weight 595 lbs

Surfacing16”

Surfacing12”



13


AD 21 Boring Machine• 230v, single phase, 12 amps• Vertical, horizontal, 45 degree drilling operation• 118” fence with stops• Mechanical revolver with 5 different boring depth adjustments• Single head boring machine with 21 spindles with quick-change chucks• Spindle Speed: 2800 m/min• Panel Height min/max: 18mm/85mm• Machine Weight: 616 lbs• Required Footprint: 40” x 46”• Made in Italy

Xylent Cutter Head

FS41 ES Jointer/Planer

Standard features:• The Xylent cutter head gives an exceptional finish. Reduced

noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips.

• Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

• The roller infeed has a helicoidal profile to guarantee firm and constant work piece feed, while the outfeed roller in sandblasted steel maintains the perfect post-processing finishing.

• Working width: 410mm• Cutterblock diameter / no. of standard knives: 95 / 4mm• Dimension of standard knives 410 x 30 x 3• Max. stock removal 5• Surfacing tables total length 2200• 230v, Single Phase, 26 amp• Made in Italy

Surfacing16”

BEST SELLER!



14


S400P Band Saw• 420mm vertical, 380mm horizontal clearance• 4.8HP motor• Wheels included for machine movement• Cast iron fence and worktable with tilting up to 45 degrees• High precision guides• Machine Weight: 535 lbs• Required Footprint: 76-1/2” H, 31” L, 30” W• 230v, single phase, 25 amps• Made in Italy

S500P Band Saw• 510mm vertical, 480mm horizontal clearance• 4.8HP motor• Wheels included for machine movement• Cast iron fence and worktable with tilting up to 45 degrees• High precision guides• Machine Weight: 635 lbs• Required Footprint: 80” H, 31” L, 30” W• 230v, single phase, 25 amps• Made in Italy

BAND SAWS



15


SAWSTOP SAWS

Industrial Cabinet Saw ICS 53230• Saw Stop Safety System automatically stops and retracts the blade on human contact• 5HP, 3 PH, 230V motor can easily cut through the thickest hardwoods• Tool-free quick change guard mount – Fast and easy transition between blade and

riving knife with no tools required• Dust collection blade guard captures 99% of generated dust• Large Start/Stop paddle for hands-free shut off• Strong and smooth fence system – a wide T-style fence and highly adjustable rail

provides smooth movement along the length of the table• Riving knife minimizes kickback and provides protection during non-through cuts• Left-tilting blade helps prevent wood from binding against the fence• Quality Fit and Finish – Premium craftsmanship and rigorous engineering combine to

create a saw that you’ll love to use

10” Jobsite Saw JSS-MCA • Tilt the blade easily and quickly to your ideal angle in 1 degree increments• Fine tune your tilt with the infinitely-adjustable Micro Adjust• Table extension clamp locks down easily. Unlock and quickly extend the table

to a full 25.5" rip capacity.• Keep your accessories contained and protected in the onboard storage drawer.

Find your Micro Guard, riving knife, miter gauge and more, all ready for quick use.• Jobsite T-Glide Fence slides smoothly and locks firm with the innovative ErgoLock.

The T-style design minimizes deflection to increase accuracy. Extend the OnDemand Shelf for support when needed.

• The Micro Guard increases visibility and protects against kickback with less interference than other guards. Quickly switch between the Micro Guard and the provided riving knife with the flip of a lever.

• Quickly release this zero clearance insert with no tools.• Simply push the pedal to release and fold the cart for travel.• Large 8" multi-terrain wheels are ideal for the variable surfaces of a jobsite.

COMPLIMENTARY PRODUCTDescription Item #Replacement break cartridge SAW.TSBC.10R2

Folded for Storage



16


SPRAY PUMP KITSWagner IceBreaker Spray Packs

Wildcat 18-40 Cart Mount Spray Packs• Wildcat 18-40 PE/TG • Trolley 4“ Assembly• AirCoat Regulator Ice Breaker • Suction Hose Assembly • Release Combo or HP Fluid Filter• GM 4700 AC With Air Cap and Tip• Twin Hose Set - 25 ft • Throat Seal Lubricant - 250 mL

Puma 28-40 Cart Mount Spray Packs• Puma 28-40 PE/TG • Trolley 4“ Assembly• AirCoat Regulator Ice Breaker • Suction Hose Assembly• Release Combo or HP Fluid Filter • GM 4700 AC With Air Cap and Tip• Twin Hose Set - 25 ft• Throat Seal Lubricant - 250 mL

Puma 28-40 Wall Mount Spray Packs• Puma 28-40 PE/TG• Wall Holder 4“ Assembly • AirCoat Regulator Ice Breaker• Suction Hose Assembly • Release Combo or HP Fluid Filter• GM 4700 AC With Air Cap and Tip• Twin Hose Set - 25 ft • Throat Seal Lubricant - 250 mL

Wildcat 18-40 Wall Mount Spray Packs• Wildcat 18-40 PE/TG • Wall Holder 4“ Assembly • AirCoat Regulator Ice Breaker • Suction Hose Assembly • Release Combo or HP Fluid Filter• GM 4700 AC With Air Cap and Tip• Twin Hose Set - 25 ft • Throat Seal Lubricant - 250 mL


17


Item # DescriptionCAT.OB14.W5.411 Wall MountCAT.OB14.C5.411 Cart Mount

Item # DescriptionCAT.H2O.OB14.W5.411 Wall Mount

Air Assisted Airless Outfit with AAA Bobcat Gun• Lightweight design• Stainless steel fluid passages• The handle is ergonomically designed to reduce fatigue and fit comfortably in any

size hand• Innovative trigger safety integrated into the gun to provide optimum safety• Integrated fluid filter• Includes gun and hoses• Available in wall mount or with a cart

C-14 Air Assisted Airless Outfitwith Wall Mount• Bobcat AAA Wall Mount Outfit• For Water Based Lacquers• 14:1 ratio pump for production fine finish• All Stainless steel fluid section• Magnetic no stall air motor design• Soft spray pattern has minimal over spray and results in excellent transfer efficiency• Requires 6 CFM• Bobcat AAA Wall Mount Outfit• Includes gun and hoses



18


AirCoat GM 4700Manual AirCoat Spray Gun• The GM 4700AC includes a stainless steel fluid passage and a range of fluid tips making it

versatile for multiple applications with its homogeneous soft spray pattern.• Maximum material pressure is rated at 250.0 bar / 3,625 psi.• Excellent finish quality• Unmatched reliability• Highest quality, robust build• Innovative features include:

∘ Reversible tips and easy access filters make it super easy to clean∘ Superior ergonomics∘ Advanced technology give this the best transfer efficiency in the market today

Item # DescriptionWAG.GM4700.BL411 AirCoat GunWAG.2315723 Cage Filter, RedWAG.2315724 Cage Filter, BlueWAG.2315725 Cage Filter, YellowCAT.53.591 Kremlin Adapter

Item # DescriptionCAT.P100G Panther General Purpose Glue Gun (Teflon Anodized)CAT.52.203 Stainless Steel Fluid Regulator with Carbide Seat & BallCAT.53.112.25 5/16” Air Hose Assembly (25ft)CAT.53.215.25 3/8” Fluid Hose Assembly (25ft)CAT.70.1101.5 Double Diagram Pump - Wall Mount with siphon tube (5gal)

Double Diaphragm Pump Adhesive Spray Kit• The Double diaphragm pumps Adhesive spray kits are the answer for spraying virtually

any type of adhesives, including “sheer sensitive” products. • They’re perfect for single, multi-hand gun and automatic spray systems. • Stainless steel construction, teflon diaphragms and stainless steel balls and seats• These units are rated at 12 gallons per minute at maximum of 100 psi fluid pressure.

Kit Includes∘ Panther General Purpose Glue Gun (Teflon Anodized)∘ Stainless Steel Fluid Regulator with Carbide Seat & Ball∘ 5/16” Air Hose Assembly (25ft)∘ 3/8” Fluid Hose Assembly (25ft)∘ Double Diagram Pump - Wall Mount with siphon tube (5gal)

SPRAY GUNS & ADHESIVE SPRAY KIT


19


Item # DescriptionBLA….M53.1053 Blum Minipress PBLA….MZM.0040 Universal RamFD.0857L 8mm x 57.5 - Left Rotation Drill BitFD.3557R 35 x 57 Right Hand Boring Bit

8 SpindleDrilling Attachment• For assembly of BOX front fixing brackets • 32mm boring for cabinet profiles • Equipped with quick release chucks • Secure using a locking device, no tools required. • Requirements:

4 x FD.0557L 4 x FD.0557R

9 SpindleDrilling Attachment• 32mm in line boring pattern • Equipped with quick release chucks • Secured using a locking device, no tools required • Requirements:

5 x FD.0557L 4 x FD.0557R

Item # DescriptionBLA….MZK.880S 8-Spindle Drilling Attachment

Item # DescriptionBLA….MZK.190S 9-Spindle Drilling Attachment

Blum Minipress• Vertical drilling and component insertion• Practical and precise ruler system • Drilling of various patterns • Change drilling patterns quickly • Single Phase• Operating power/frequency: 1x220V, 60Hz• Requires Compressed Air

BLUM MINIPRESS


Some items shown may not be stocked in all branches. Please call for availability. We regret that we cannot be liable for pictorial, typographical, or pricing errors. Copyright © McFadden's 2019. All rights reserved.

OAKVILLE HEAD OFFICE VAUGHAN MONTREAL

2323 Winston Park Drive, Unit 1Oakville, Ontario L6H 6R7 CanadaTel: 416-674-3333 • 1-800-268-0942Fax: 416-848-1508

289 Courtland Ave, Unit BVaughan, Ontario L4K 4W9 CanadaTel: 905-760-2663 • 1-888-760-2660Fax: 905-760-2811

8935 Pascal GagnonSt-Leonard, Quebec H1P 1Z4 CanadaTel: 514-343-5414 • 1-888-262-3233Fax: 514-343-5308

OTTAWA ST. JOHN’S HALIFAX

116 Willowlea Rd, Unit 7Ottawa, Ontario K0A 1L0 CanadaTel: 613-831-9686 • 1-800-807-8751Fax: 613-831-8560

14 Austin StreetSt. John’s, NewfoundlandA1B 4C2 Canada Tel: 709-738-6931 Fax: 709-738-6948

120 Troop Ave, Unit 500Dartmouth, Nova Scotia B3B 1Z1 CanadaTel: 902-466-3355 Fax: 902-466-3366

MONCTON PETERBOROUGH QUEBEC CITY

71 Loftus St.Moncton, New Brunswick E1E 2N1 CanadaTel: 506-388-5544 • 1-866-663-0166 Fax: 506-388-5540

375 Pido Road, Unit 1Peterborough, Ontario K9J 6X7 CanadaTel: 705-742-2154 • 1-800-807-8751Fax: 705-742-3650

2600 rue Jean-Perrin Bureau 145Québec, Quebec G2C 2C6 CanadaTel: 581-701-2237

Documents

MACHINERY - McFadden's