MACHINE RANGE - rudd.com.au€¦ · Power Source Weight 25.5Kg Power Source Warranty 2 Years. 2 YEAR LIMITED WARRANTY INVERTER WELDER MST195 M MIG INVERTER POWER PLUG 15 Amp PLATE

www.bossweld.com.au Powered by

MACHINERANGE

2018/19

Part Number Description

660200 Bossweld 200E AC/DC TIG Welder

Technical Data 200 E AD/DC

Power Supply: 1 Phase 240V 50HZ +/-10%

Yes

15A Primary Input Plug Fitted Yes

Duty Cycle @ 40°c TIG 35% @ 200A

Duty Cycle @ 40°c MMA 50% @ 170A

Open Circuit Voltage 66.0V

Output Current Range TIG (AC) 10-200 Amps

Output Current Range TIG (DC) 10-170 Amps

Output Current Range MMA 10-170 Amps

I Max TIG 33.5A

I Max MMA 36.9A

I ieff TIG 19.8A

I ieff MMA 23.3A

Power factor 0.68

Protection Class IP23

Insulation Class H

Electrode Diameter Range 1.6-4.0mm

Thermal Overload Protected Yes

For use with generators Yes

Power Source Dimensions 48 x 14 x 24cm

Power Source Weight 10Kg

Power Source Warranty 2 Years


660205 Bossweld DigiPro TIG 200 AC/DC PFC TIG Welder

Technical Data DIGIPRO TIG 200


Yes



Duty Cycle @ 40°c TIG 40% @ 200A


Output Current Range TIG (AC) 10-200 Amps

Output Current Range TIG (DC) 10-170 Amps


I Max TIG 19.7A

I Max MMA 30.4A

I ieff TIG 15A

I ieff MMA 22.8A

Power factor 0.99


Insulation Class H



For use with generators Yes*


Power Source Weight 14.5Kg



660345 Bossweld DigiPro TIG 345 AC/DC TIG Welder

Technical Data DIGIPRO TIG 200


Yes

Duty Cycle @ 40°c MMA 60% @ 320A, 100% @ 250A

Duty Cycle @ 40°c TIG 60% @ 320A, 100% @ 250A

Open Circuit Voltage 61V

Output Current Range TIG 10-320 Amps

I Max TIG 21A

I Max MMA 27.5A

I ieff TIG 15A

I ieff MMA 19A

Power factor 0.65


Insulation Class H



For use with generators Yes

Power Source Dimensions 55 x 24 x 44.5cm

Power Source Weight 25.5Kg


2YEARLIMITED

WARRANTY

INVERTERWELDER

MST195

MMIG

INVERTERPOWER

PLUG15 Amp

PLATE THICKNESSup to 10mm mild steel

IDEAL WIRE SIZE0.9mm

MATERIAL TYPEAluminium (MIG only), Mild Steel, Stainless Steel, Brass, Cast Iron

DUTY CYCLE17% at 180Amps

DIY

TR

AD

ETR

AD

EP

RO

FESSIO

NA

L

SSTICK

TTIG

INVERTERWELDER MST195MMIG

INVERTERPOWER

Part Number 610090

Power Supply 240V

Primary Input Plug Fitted 15 Amps

Duty Cycle 17% @ 180 Amps60% @ 120 Amps100% @ 90 Amps


Output Current Range MIG: 40-180 AmpsMMA: 10-180 AmpsTIG DC: 10-180 Amps

I ieff MIG: 15 AmpsMMA: 15 AmpsTIG: 15 Amps

Input Current Max MIG: 37 AmpsMMA: 42 AmpsTIG: 26 Amps

Power factor 0.7


Insulation Class H

Wire Diameter Max 0.9mm

Electrode Diameter Max 4.0mm

Thermal overload protected Yes

Generator Capacity KVA 8.0

Machine Dimensions 470 x 215 x 400mm

Machine Weight 12kg

TECHNICAL SPECS

FAN ONDEMAND

TIG TORCH CONTROL PLUG

HEAVY DUTYCARRY HANDLE DURABLE

METAL HOUSING

VIVID EASY READ DIGITAL DISPLAY

EURO TORCH CONNECTOR

Aluminium (MIG only) 8

Mild Steel 10

Stainless Steel 10

Brass 6

Cast Iron 8

WIRE/ELECTRODE SIZE MAX

MATERIAL PLATE THICKNESSMAX (mm)

IN THE BOX (KEY COMPONENTS)

3m 15 Series MIG Torch

Welding Earth Lead

Electrode Holder Lead

Gas Hose

SSTICK

TTIG

POSITIVE OUTPUT TERMINAL

POSITIVE OUTPUT TERMINAL

QUICKCONNECT GAS OUTLET (TIG)

LARGE EASY GRIP ADJUSTMENT KNOBS

Wire 0.9mm

Electrode 4.0mm

Dual Stage Argon Regulator

Drive Roller1 x Gasless

1 x Steel (Fitted)

Torch Spares Cable/Lead Tidy

OPTION / UPGRADEPART NO. DESCRIPTION

95.26F.4.1.SW12A Tig Torch 26, 4mt, 1 pc, Switch, Dinse 50

95.26F.8.1.SW12A Tig Torch 26, 8mt, 1 pc, Switch, Dinse 50


MST X250 PFC250 AMP MULTIPROCESS MIG/MMA/TIG INVERTER WELDER

4 roll wire feed

system

MST X250 PFC


TECHNICAL DATA

ORDERING INFO


600592 Bossweld MST X250 PFC Multiprocess Welder

The Bossweld MST X250 PFC is a lightweight and portable multi process in-verter based welder that gives the welder the possibility to MIG, Stick and TIG weld, making it the ideal choice for your next welding project.

FEATURES• IGBT Inverter Technology• Digital Control• Power Factor Correction 97%• Euro Torch Connection• Dinse 35/50 Lead connections• Fan Cooled• Simple to operate • Stepless Voltage control• Stepless Amperage control• Stepless wire feeding Control• 2T/ 4T Trigger latching function• Lightweight Industrial• Suits 5Kg (D200) & 15Kg (D300)

MIG Spools• 4 roll wire feed system• Wire feed Inching function• Burnback pre/post gas• Downslope adjustment in liftig• Spool gun ready

PROCESS• DC Stick (MMA) welding• DC TIG welding (lift start)• Gas and Gasless Mig welding

PACKAGE INCLUSIONS• Power Source• Argon Regulator Twin Gauge (400210)• BZ 24 4mt Mig Torch (92.ER.24.4)• 3mt Electrode & Earth lead set• 0.8-1.0mm Drive Roller (Fitted)• 3mt Gas Hose• Operators Manual

OPTIONS/UPGRADES• 4mt Agility 26F Tig Torch

(95.26F.4.1.SW9MA)• 8mt Agility 26F Tig Torch

(95.26F.8.1.SW9MA)

Technical Data MST X250 PFC

Power Supply: 1 Phase 220V 50-60 HZ +/-10%

Yes



Duty Cycle @ 40°c MIG 35% @ 250A


Output Current Range MIG 40-250 Amps


I Max MIG 43A

I Max MMA 44A

I ieff MIG 25.4A

I ieff MMA 24A

Power factor 0.97


Insulation Class H

MIG Wire Diameter Range 0.6-1.2mm

Electrode Diameter Range 1.6mm-5.0mm


For use with generators Yes*

Power Source Dimensions 63.5 x 24 x 43cm

Power Source Weight 25Kg


SIMPLE TO OPERATE

FINE ADJUSTMENTS

4 ROLL WIRE FEEDER

*Please note: when using this machine with a generator; the generator must have AVR Automatic Voltage Regulation


POWERPRO 250250 AMP MULTIPROCESS MIG/MMA/TIG INVERTER WELDER

POWERPRO 250


TECHNICAL DATA

The Bossweld PowerPro 250 is a multi process inverter based welding power source that gives the welder the possiblity to MIG, Stick and TIG weld all from the one unit.

FEATURES• IGBT Inverter Technology• MMA/TIG Function Switch• Euro Torch Connection• Dinse 35/50 Lead connections• Fan Cooled• Simple to operate • Stepless Voltage control• Stepless Amperage control• Stepless wire feeding Control• Gun Hanger fitted• Soft Start wire feeding system• Internal wire feeder system• 4 roll wire feed system• Spool Gun Ready

PROCESS• MIG Welding• DC Stick (MMA) Welding• DC TIG Welding Lift Arc• Gas/Gasless MIG Welding

PACKAGE INCLUSIONS• Power Source• Argon Regulator Twin Gauge (400210)• BZ 24 4mt Mig Torch (92.ER.24.4)• 3mt Electrode & Earth lead set• 0.8-1.0mm Drive Roller (Fitted)• 0.9-1.2mm Drive Roller (Spare)• 3mt Gas Hose 8mm ID• Operators Manual

OPTIONS/UPGRADES• Spool Gun (97.SPG.6.5)• 4mt Agility 26FV Tig Torch

(95.26FV.4.1.DA50)• 8mt Agility 26FV Tig Torch

(95.26FV.8.1.DA50)ORDERING INFO


600250 Bossweld PowerPro 250

Technical Data POWERPRO 250


Yes

Rated Power MIG 9.2 KVA

Rated Power MMA 8 KVA

Welding Voltage Range MIG 15.8-26.5V






I Max MIG 34.9A

I Max MMA 33.4A

I ieff MIG 27A

I ieff MMA 25.9A

Power factor 0.85

Protection Class IP21S

Insulation Class F


Electrode Diameter Range 1.6 x 4.0mm


For use with Generators Yes


Power Source weight 45 Kgs


GUN HANGER EURO CONNECT TORCH

4 ROLL WIRE FEEDER


POWERPRO 350350 AMP MULTIPROCESS MIG/MMA/TIG INVERTER WELDER

POWERPRO 350


TECHNICAL DATA

FEATURES• IGBT Inverter Technology• MMA/TIG Function Switch• Euro Torch Connection• Dinse 35/50 Lead connections• Fan Cooled• Simple to operate • Stepless Voltage control• Stepless Amperage control• Stepless wire feeding Control• Gun Hanger fitted• Soft Start wire feeding system• Internal wire feeder system• 4 roll wire feed system• Spool Gun Ready

PROCESS• MIG Welding• DC Stick (MMA) Welding• DC TIG Welding Lift Arc• Gas/Gasless MIG Welding

PACKAGE INCLUSIONS• Power Source• Argon Regulator Twin Gauge (400210)• BZ 36 4mt Mig Torch (92.ER.36.4)• 3mt Electrode & Earth lead set• 0.8-1.0mm Drive Roller (Fitted)• 0.9-1.2mm Drive Roller (Spare)• 3mt Gas Hose 8mm ID• Operators Manual • Note: Primary Plug not fitted

OPTIONS/UPGRADES• Spool Gun (97.SPG.6.5)• 4mt Agility 26FV Tig Torch

(95.26FV.4.1.DA50)• 8mt Agility 26FV Tig Torch

(95.26FV.8.1.DA50)

ORDERING INFOPart Number Description

600350 Bossweld PowerPro 350

Technical Data POWERPRO 350


Yes

Rated Power MIG 11 KVA

Rated Power MMA 9.5 KVA

Welding Voltage Range MIG 16.5-29V






I Max MIG 22.6A

I Max MMA 19.5A

I ieff MIG 17.4A

I ieff MMA 15.1A

Power factor 0.85

Protection Class IP21S

Insulation Class F


Electrode Diameter Range 1.6 x 5.0mm


For use with Generators Yes


Power Source weight 47 Kgs


The Bossweld PowerPro 350 is a multi process inverter based welding power source that gives the welder the possiblity to MIG, Stick and TIG weld all from the one unit.

GUN HANGER EURO CONNECT TORCH

4 ROLL WIRE FEEDER


POWERPULSE 250PFCDUAL PULSE SYNERGICMULTI FUNCTION INVERTER WELDER

30%DUTY CYCLEAT 250AMPS

PFC POWER FACTOR

CORRECTION

POWERPULSE 250PFC

www.bossweld.com.au

ORDERING INFOPart Number Description

660250 Bossweld Powerpulse 250PFC

The POWERPULSE 250PFC machine is a new inverter-based MIG/MMA/TIG Welding machine with Synergic Programs and Dual pulse functions. The MIG function allows you to weld with Gas Shielded wire applications giving excellent, professional welding results. Easy step-less adjustment of voltage and wire feed coupled with integrated digital meters allows easy setting of welding parameters. POWERPULSE 250PFC features MIG welding with Synergic welding programs designed for ease of use with your selected gas mixture. The operator selects the gas mixture and wire diameter they are using then simply start welding. Once this is done the operator can make fine adjustments to the voltage for even greater control of the weld pool. The added Lift-Arc DC TIG capability delivers perfect arc ignition every time and a remarkably smooth stable arc produces high quality TIG welds. TIG functionality includes adjustable Down Slope & Post Gas as well as being gas solenoid-valve equipped. An additional feature is the Spool Gun ready function that allows the simple connection of Spool Gun for the use of thin or softer wires that don’t have the column strength to feed through MIG torches, such as aluminum wire. In the JOB mode, 100 different JOB records can be stored and recalled, The POWERPULSE 250PFC machine has built-in automatic protection function to protect the machines from over-voltage, over-current and over-heat. If any one of the above problems happens, the alarm lamp on the front panel will be lit and output current will be shut off automatically for the machine to protect itself and prolong the equipment using life.

PACKAGE INCLUSIONS• Bossweld 250A MST Double Pulse Mig 240V • Bossweld Binzel Style BZ36 Complete MIG Torch Ergon 3Mt• Argon Twin Gauge Regulator• 3mt Gas Hose with Quick connection• Arclead Set 230A 6Mt EH/4Mt EC• 2 x Bossweld Drive Roller 1.0/1.2mm U Groove (Aluminium) • 2 x Bossweld Drive Roller 0.8/1.0mm V Groove (Mild Steel)• Bossweld Binzel Style Red Teflon Liner 0.9 - 1.2mm 3Mt

Technical Data POWERPULSE 250PFC


Yes

Welding Voltage Range MIG 14.8-26.5V

Duty Cycle @ 40°c MIG/TIG/MMA 30% @ 250A


Output Current Range MIG 15-250Amps

Output Current Range TIG/MMA 10-250Amps

I Max MIG 35Amp

I Max MMA 40Amp

I ieff MIG 19Amp

I ieff MMA 22Amp

Power factor 0.99


Insulation Class H

MIG Wire Diameter Range

Mild Steel: 0.6/0.8/0.9/1.0/1.2 Stainless Steel: 0.8/0.9/1.0/1.2Flux-Cored: 0.6/0.8/0.9/1.0/1.2

Aluminium :1.0/1.2

Electrode Diameter Range 1.6mm - 5.0mm



Power Source weight 27Kg


TECHNICAL DATA

FEATURES• New PWM technology and IGBT inverter technology.• Active PFC technology for increased duty cycle and energy efficiency. • MIG/MAG with Pulse SYN/Dual pulse SYN/Manual and SYN function

- Synergic programs for aluminum, mild steel, stainless steel and CuSi - JOB mode (Save and call 100 different job records) - 2T /4T/S4T/Spot Weld welding mode - Function parameter adjustment

• MMA function (Stick electrode) - Hot start (improves electrode starting) - Adjustable Arc Force

• DC TIG - Lift Arc ignition (prevents tungsten sticking during arc ignition) - 2T /4T Trigger Control - Adjustable Down slope - Gas/air cooling mode

• Internal wire feeder, gear driven for up to 300mm Ø spool• Euro style MIG torch connection • IP23 rating for environmental/safety protection • Spool Gun Connection

Powered by

1

2

3

4

5

6

7

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SYNERGIC PROGRAMS INDICATORSelect from a list of Preset programs, This will set the machine for the correct wire size, wire type and gas being used, Program number will be displayed to the left digital display

WELDING VOLTS INDICATORValue will be displayed on the left digital display.

ARC LENGTH INDICATORAdjustable from -10.0 to +10.0 The higher the value, the longer arc length, The lower the value the shorter the arc length.Value will be displayed on the left digital display.

INDUCTANCE INDICATORAdjustable from -10.0% to +10.0%Value will be displayed on the left digital display.

MATERIAL THICKNESS INDICATORValue will be displayed on the right digital display.This will vary depending on synergic program selection.

WIRE SPEED INDICATORValue will be displayed on the right digital display.

WELDING CURRENT INDICATOR Value will be displayed on the right digital display.

8

SPOOLGUN

JOB INDICATORSaved job numbers will be displayed to the right digital display, Use R parameter dial (13)

POWERPULSE 250PFC- CONTROL PANEL

SPOOLGUN

1 2 3 4 5 6 7 8 109 11

12 13 14 1615 17

9

10

11

16

12

13

14

15

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

WIRE INCH BUTTONPress and hold to feed wire

GAS CHECK BUTTONPress and hold to check gas flow

WELDING PROCESS BUTTON- MIG-MAG Pulse Synergic- MIG-MAG Dual Pulse Synergic- MIG-MAG Manual- MIG-MAG Synergic- MMA- TIG

TRIGGER MODE SELECT BUT-TON- 2T- 4T- S4T- SPOT WELD

L PARAMETER SELECT / ADJUSTMENT KNOBUse this knob to select fuctions and adjust parameters

R PARAMETER SELECT / ADJUSTMENT KNOBUse this knob to select fuctions and adjust parameters

JOB BUTTON In the JOB mode, 100 different JOB records can be stored and called, Improve the quality of welding process.

PROGRAM SAVE / DELETE Save current setting you need to press Job button first and then select a job number that is not being used this will be indicated by - - - on the left digital display, job number is displayed on the right digital display,or delete programed job number

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

PRE GAS Selection for gas flow time prior to the arc startingAdjustable from 0 - 5 sec

POST GAS Selection for gas flow time after the arc finishes.Adjustable from 0 - 10 sec

SLOW FEED TIME This function is used to regulate the speed of wire feeding increasing.Adjustable from 0 - 10 sec

BURNBACK Control sets the amount of wire to ‘burn back’ after you release the trigger of your torch.Adjustable from 0 - 10

SPOT WELD TIME Is the time during which welding current is applied to the metal sheetsAdjustable from 0 - 10 sec

DELTA PULSE CURRENT The difference between base current and peak current in pulse welding.20-200

DUAL PULSE FREQUENCY Set pulse frequency, regulating the value of time T, namely, ripple pattern of density regulation. Higher Hz produces many short ripples with slightly lower penetration.Adjustable from 0.5 - 3.0Hz

DUAL PULSE DUTY Set strong pulse time (peak) for penetration and low-frequency cycle ratio (cooling), namely the regulation of the proportion of the ripple pattern on weld puddle surface and resulting depth in groove.Adjustable from 10 - 90%

DUAL PULSE BASE CURRENT PERCENT Sets the current of the low/ base pulse.Adjustable from -10 - +10

SPOOLGUN

17

FUNCTION BUTTON Press to scroll through weld function settingsParameters will be displayed to both digital displaySee below for function settings

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

SPOOLGUN

START CURRENT PERCENT Available in 4T trigger mode, sets a welding current 10-200% of the main welding current activated when the trigger is held on to ‘latch’ the trigger before the main weld current is started. Once the trigger is released, the current will go through the upslope period if it is set, to the main welding currentAdjustable from 1 - 200%

START CURRENT ARC LENGTH In S4T welding mode, excessive arc length will lead to more spatters and unsightly welds, so it is necessary to set reasonalbe quantity.Adjustable from -10 - +10

END CURRENT PERCENT 4T trigger mode only, sets a welding current 10-200% of the main welding current ac-tivated when the trigger is held on to ‘unlatch’ the trigger before the weld is finished. If downslope is set, the current will go through the downslope period before going to the end current set. When the trigger is released, the arc will stop.Adjustable from 10%-200%

END CURRENT ARC LENGTH S4T welding mode, excessive arc length will lead to more spatters and unsightly welds, so it is necessary to set reasonalbe quantity.Adjustable from 0 - 10

HYDROCOOLING Select water coolling ON or OFF

SPOOL GUN Spool Gun ON or OFF

HOT START Electrode Pre-heating on the weld start. Makes electrode priming easier and prevents it from sticking when cold

ARC FORCEAlso called Dig and Arc Control. Gives a power source variable additional amperage during low voltage (short arc length) conditions while welding. Helps avoid “sticking” stick electrodes when a short arc length is used.Adjustable from 0 - 10

DOWN SLOPE Selection for the transition time from Peak Amperage to Finish Amperage.Adjustable from 0 - 10

SPOOLGUN

FUNCTION BUTTON Press to the functiopn button to exit settings

POWERPULSE 250PFC- WELD CYCLE.

www.bossweld.com.auPowered by

Documents

MACHINE RANGE - rudd.com.au€¦ · Power Source Weight 25.5Kg Power Source Warranty 2 Years. 2 YEAR LIMITED WARRANTY INVERTER WELDER MST195 M MIG INVERTER POWER PLUG 15 Amp PLATE