10
Procedia Materials Science 5 (2014) 1819 – 1828 Available online at www.sciencedirect.com 2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/). Selection and peer-review under responsibility of Organizing Committee of AMME 2014 doi:10.1016/j.mspro.2014.07.469 ScienceDirect © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/). Selection and peer-review under responsibility of Organizing Committee of AMME 2014

Machinability of Al2O3 Composites

Embed Size (px)

Citation preview

Page 1: Machinability of Al2O3 Composites

Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Available online at www.sciencedirect.com

2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014doi: 10.1016/j.mspro.2014.07.469

ScienceDirect

© 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014

Page 2: Machinability of Al2O3 Composites

1820 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 3: Machinability of Al2O3 Composites

1821 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 4: Machinability of Al2O3 Composites

1822 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 5: Machinability of Al2O3 Composites

1823 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 6: Machinability of Al2O3 Composites

1824 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 7: Machinability of Al2O3 Composites

1825 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 8: Machinability of Al2O3 Composites

1826 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 9: Machinability of Al2O3 Composites

1827 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828

Page 10: Machinability of Al2O3 Composites

1828 K. Venkatesan et al. / Procedia Materials Science 5 ( 2014 ) 1819 – 1828