Ma5600 Multi Service Access Module Operation and Maintenance

ISSUEISSUE

Fixed Network Curriculum

Development Section

Fixed Network Curriculum

Development Section

MA5600 Multi-Service Access Module Operation and Maintenance

MA5600 Multi-Service Access Module Operation and Maintenance

1.01.0

Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal

Objectives Objectives

Grasp the basic knowledge of command line

Grasp the basic system configuration

Grasp the basic service and function

configuration

Upon completion of this course, you will be able

to:


Contents Contents

1 Introduction to Command Line Operations

2 Basic System Configuration

3 Port Configuration

4 VLAN Service Configuration


Command Line Basis Command Line Basis

MA5600 ＞

Login via serial port

or TELNET

Privilege user mode

MA5600 #

OSPF mode

MA5600(config-ospf)#

RIP modeMA5600(config-rip)#

interface configuration modeMA5600(config-if-…)#

MA5600(config-test)#

enable

disable

Configure

return

ospf

rip

test

quit

quit

Diagnose mode

MA5600(config-diagnose)#

interface

diagnose

MA5600 command line mode

Ordinary user mode

Global configuration mode

TEST mode

MA5600(config)#

MA5600(config-btv)#

BTVBTV mode


Command Line Basis Command Line Basis

Command line help

By entering “?” , you can get list of commands with a brief

description under any command mode

MA5600#display?

Key word matching

MA5600#conf<space> ---- MA5600#configure

Chinese/English language switching

MA5600#Switch language mode

Access history commands

Access the previous history command: "Ctrl +P"

Access the next history command: "Ctrl +N"


Contents Contents






Setting up Configuration Environment Setting up Configuration Environment

MA5600 control console provides two configuration modes:

Setting up local configuration environment via the Console

Local maintenance

Setting up configuration environment via Telnet

Local and remote maintenance

In-band Telnet: Occupying service channels

Out-band Telnet: Occupying no service channel


MA5600

CONETHMON

SCU

AD

EF


Setting up a local configuration environment via the Console

Connect the computer serial port with the MA5300 Console via a s

tandard RS232 serial cable, then configure hyper terminal in Wind

ows or other operation systems.

PCRS232 serial port cable


Open the hyper terminal

Open-Program-Accessories-

Communications-Hyper terminal: Double click

Setting the HyperTerminal parameters

Enter the name: MA5600（ The name can be defined by

the user） Connection use: Directly connect to Serial port 1

(depending on actual conditions)

Port setting: 9600bit/s, 8 data bits, no parity check

1 suspension bit, no flow control

Terminal type: VT100 or automatic test

Hypertrm. exe



MA5600

CONETHMON

SCU

AD

EF


server Telnet Terminalworkstation

LAN

workstation

LAN local Telnet mode

Setting up Configuration Environment via Telnet

ETH


MA5600

CONETHMON

SCU

AD

EF


WAN

LAN

Remote router

Local router

Telnet terminal

LAN

workstation

workstation

WAN remote Telnet configuration mode



User login

Via the Console

After correctly connecting the hyper terminal, press Enter key

according to the prompt to enter the configuration environment

Via Telnet

According to the prompt, enter correct user name and password to

enter the configuration environment


Basic Maintenance Operations Basic Maintenance Operations

Out-band NM configuration

MA5300(config)#interface meth 0

Enter the external network interface port mode.

MA5300(config-if-meth0)#ip address 10.71.53.2 255.255.255.

0

Configure the IP address of the external network interface

MA5300(config-if-meth0)#undo shutdown

Activate the external network interface


In-band NM Configuration ExampleIn-band NM Configuration Example

MA5600SCU

A

F

E

D

MA5200

S

M

B

HRB

Upstream

0

7

FE0/7/0

0

7

HAB

Port ethernet 0/7/0 on the MA5600’s SCU board is connected to port 0 on the MA5200’s HAB board.The IP address of the MA5600 inband NMS is 10.10.20.2/24. The NMS VLAN ID is 1000. The IP address of the NMS is 10.10.21.1/24The IP address of the MA5200’s VT interface is 10.10.20.254/24.The IP address of port 0 of the MA5200 HRB board is 10.10.40.1/30.



In-band NM configuration

MA5600(config)#vlan 1000 mux

Add NM VLAN

MA5600(config)#interface vlan-if 1000

Enter the Vlan-interface 1000 configuration mode .

MA5600(config-if-vlanif1000)#ip address 10.10.20.2 255.255.

255.0

Configure the equipment with a management address, which should

be configured on vlan virtual interface 1000 .

MA5600(config)#port vlan 1000 0/7 0

Add the upstream port



SNMP network management configuration

MA5600(config)# snmp-agent community read public

MA5600(config)# snmp-agent community write private

Set the community name and access authority

MA5600(config)# snmp-agent trap enable

Enable sending Trap


MA5600(config)#snmp-agent target-host trap address 10.10.

21.1 securityname private

Set Trap destination address.

MA5600(config)#snmp-agent trap source vlanif 1000

Specify IP address of the inband NMS as the Trap source address.

MA5600(config)#route-static 10.10.41.1 30 10.10.20.254

Configure the equipment with a static route.

MA5600(config)#save




Operation terminal configuration

Adding a User MA5600#terminal user name

Deleting a User MA5600#undo terminal user name

Modifying user level MA5600#terminal user level

Modifying user password MA5600#terminal user password

Modifying number re-entries MA5600#terminal user reenter

Viewing User Information MA5600#display terminal user


Basic Maintenance OperationsBasic Maintenance Operations

Board Management

Query a Board MA5600#display board 0

MA5600#display board 0/2

Add a board(ADEF) MA5600(config)#board add 0/1 ADE

Confirm a Board MA5600(config)#board confirm 0

Delete a board MA5600(config)#board delete 0/2

Reset a Board MA5600(config)#board reset 0/1



Equipment management

Reset the system MA5600(config)#reboot system

Show CPU Occupancy Ratio MA5600>display cpu 0/7

Display the system time MA5600> display time

Set the system time

MA5600#time HH:MM:SS YYYY/MM/DD

Display the system version MA5600(config)#display version 0/7

Setting hostname

MA5600(config)#sysname MA5600


System Management Configuration System Management Configuration

Configure File Management

Query the initial configuration of the MA5300 intelligent IP integrated

access equipment

MA5600#display saved-configuration

Query the current configuration of the MA5300 intelligent IP integrate

d access equipment

MA5600#display current-configuration

query the configuration commands of fault restoration.

MA5600#display unresumed-configuration

Save the current configuration MA5600#sav

e

Erase the configuration files in the Flash MA5600#eras

e flash data


ADSL Port ConfigurationADSL Port Configuration

To set the VPI/VCI of a port, run the command service-port.

MA5600(config)#service-port vlan 2 adsl 0/2/1 vpi 0 vci 35 rx-

cttr 0 tx-cttr 0

To add multiple virtual ports to a VLAN at a time, run the com

mand multi-service-port.

MA5600(config)#multi-service-port 3 adsl 0/2 3-10 rx-cttr 0 tx-c

ttr 0

(vlan-id 3, board 0/2 ,port range 3/10 )

Unblocking Adsl port

MA5600(config-if-adsl-0/2)#undo block all


Contents Contents







MA5600

CON

ETH

MON

SCU

ADEF SPLT

PCMODEM



Entering ADSL board configuration mode

MA5600(config)#interface adsl 0/5

Add an ADSL2+ line profile

MA5600(config)#adsl line-profile add huawei…

Activate port 0 on the ADSL board with line-profile above:

MA5600(config-if-adsl-0/5)#activate 0 huawei

Resetting ADSL Chipset

MA5300(config-if-adsl-0/2)#chipset reset 1



Through the bit allocation information, you can get to know the

number of bits carried by every ADSL2+ tone (totally 512

tones), and analyze the performance of the line.

MA5600(config-if-adsl-0/2)#display line bit-allocation 61

Upstream bits per frame: 312

Downstream bits per frame: 5616

0 0 …… 6 6 ****** 7 9 ********* 8 10 **********

9 11 ***********10 12 ************11 12 ************12 13 *************13 14 **************

14 14 **************15 14 ************** ……31 6 ****** ……



Adding an ADSL Line Alarm Profile

MA5600(config)#adsl alarm-profile add 3

(Refer to operation manual to see more detail)

Bind alarm profile 1 with all ports of the ADSL2+ board

residing in slot 10.

MA5600(config-if-adsl-0/10)#alarm-config all 1

Deleting an ADSL Line Alarm Profile

MA5600(config)#adsl alarm-profile delete 3

Querying ADSL line alarm profile information

MA5600(config)#display adsl alarm-profile 3



Querying ADSL Port Information

MA5600(config)#display service-port port 0/10/1

Viewing line parameters of a port

MA5600(config-if-adsl-0/2)#display parameter 2

view the statistics collected on an ADSL2+ port within the past

15 minutes or 24 hours, or all available performance statistics.

MA5600(config-if-adsl-0/2)#display statistics performance 61

historic-15minutes 1


MA5600

CON

ETH

MON

SCU

SHEA

SHDSL Port ConfigurationSHDSL Port Configuration

MODEM



Add an SHDSL line profile, and number it as 3

MA5600(config)#shdsl line-profile add 3

When operating in blocked state, an SHDSL port cannot

transmit data, and any operation on the port is prohibited. To

operate the port, you need to unblock the port first.

MA5600(config-if-shdsl-0/1)#undo block all

Activate all ports on the board residing in slot 4 using profile 3.

MA5600(config-if-shl-0/3)# activate all 3



Adding an SHDSL Line Alarm Profile

MA5600(config)#shdsl alarm-profile add 2

Bind alarm profile 2 with all ports of the SHDSL board residing

in slot 3.

MA5600(config-if-shdsl-0/3)#alarm-config all 2

Deleting an SHDSL Line Alarm Profile

MA5600(config)#shdsl alarm-profile delete 2

Querying SHDSL line alarm profile information

MA5600(config)#display shdsl alarm-profile 2



view the brief information on a port

MA5600(config-if-shl-0/3)#display port state 0

--------------------------------------------------------------------

Port Running Control Line Alarm Running Config Bind

ID Status Status Profile Profile Operation Operation Status

--------------------------------------------------------------------

0 Activating Active 1 1 Normal None Normal

--------------------------------------------------------------------

MA5600(config-if-shl-0/3)#display line state 2

MA5600(config-if-shl-0/3)#display statistics performance 2 current


Ethernet Port ConfigurationEthernet Port Configuration

Set duplex mode of an Ethernet port

MA5600(config-if-scu-0/7)#duplex all full

Set the bit rate of an Ethernet port

MA5600(config-if-scu-0/7)#speed all 1000m

Set an Ethernet port’s network cable type

MA5600(config-if-scu-0/7)#mdi all auto



Enable/Disable a Port’s Traffic Control Function

MA5600(config-if-scu-0/7)#flow-control all

Enable/Disable Traffic Suppression

MA5600(config-if-scu-0/7)#traffic-suppress all broadcast value 1

Configure a Port's MAC Address Learning Attribute

MA5600(config)#mac-address max-mac-count adsl 0/10/1 vpi 0 v

ci 35 10



Enable/Disable Port Aggregation

MA5600(config-if-scu-0/7)#link-aggregation 0-1 ingress

MA5600(config-if-scu-0/7)#display link-aggregation

-----------------------------------------------

Master port Sub-ports Mode

-----------------------------------------------

0 1 ingress

-----------------------------------------------



View the configuration of an Ethernet port

MA5600(config-if-scu-0/7)#display port state all

--------------------------------------------------------------------

Port Port Optic Native MDI Speed Duplex Flow- Active Link

Type Status VLAN (Mbps) Control State

--------------------------------------------------------------------

0 GE absence 1 - 1000 full on active offline

1 GE absence 1 - 1000 full on active offline

--------------------------------------------------------------------


VLAN Service ConfigurationVLAN Service Configuration

The MA5600 supports diverse VLAN applications, including:

Standard VLAN

Smart VLAN

MUX VLAN

Super VLAN

QinQ VLAN

Stacking VLAN


Contents Contents






Standard VLAN Configuration ExampleStandard VLAN Configuration Example

MA5600-A

A

F

E

D

SCU

MA5600-B

A

F

E

D

SCU

0/7/0

0/7/1

0/7/0

0/7/1

IP network

To establish the above connections,

do as follows:

Add VLAN 9

Run the command port vlan on MA56

00_A to add a port on MA5600_B an

d a port on MA5600_A to a standard

VLAN.


Standard VLAN ConfigurationStandard VLAN Configuration

Standard VLAN configuration involves:

1.Creating/Deleting a standard VLAN

MA5600(config)#vlan 9 standard

2.Adding/Deleting a port to/from a standard VLAN

MA5600(config)#port vlan 9

{ frame/slot<S><3,4>|to<K> }:0/7

{ portlist<S><1,256> }:0

MA5600(config)#port vlan 9

{ frame/slot<S><3,4>|to<K> }:0/7

{ portlist<S><1,256> }:1


Standard VLAN ServiceConfigurationStandard VLAN ServiceConfiguration

3.Displaying the information on a standard VLAN

MA5600(config)#display vlan 9

VLAN ID: 9

VLAN attribute: standard

Standard port number: 2

--------------------------

F/ S/ P State

--------------------------

0/ 7/ 0 down

0/ 7/ 1 down

--------------------------


Smart VLAN Service ConfigurationSmart VLAN Service Configuration

The Smart VLAN configuration

involves:

1.Adding/Deleting a Smart VLAN

2.Adding/Deleting a port to/from

a Smart VLAN

3.Displaying the information on a

Smart VLAN

ADSL link configuration

User User User…………………...User

vlan 20

Upper

network

MA5600

CONETHMONA

DE

F

AD

EF



Create a Smart VLAN.

MA5600(config)#vlan

{ smart<K>|vlanid<U><1,4000> |attrib<K>}:20

{vlantype<E><mux,standard,smart,super>|to<K> }:smart

Add the upstream port


Configure multicast PVCs.

MA5600(config)#vlan smart 20

{ vpi<K> }:vpi 0 vci 35



Add port 1 on the ADSL board residing in slot 0/12 to VLAN 2

0.

MA5600(config)#service-port vlan 20 adsl 0/12/1 vpi 0 vci 35 r

x-cttr 2

Add port 0-31on the ADSL board residing in slot 0/0 to VLAN

20

MA5600(config)# multi-service-port vlan 20 adsl 0/0 0-31 rx-ct

tr 2 tx-cttr 2

After the above configuration, the PCs can visit Internet but

can not ping each other.


MUX VLAN ConfigurationMUX VLAN Configuration

The MUX VLAN configuration involves:

1.Creating/Deleting a MUX VLAN

2.Adding/Deleting a port to/from a MUX VLAN

3.Displaying the information on a MUX VLAN

ADSL link configuration



Create a MUX VLAN.

MA5600(config)#vlan

{ smart<K>|vlanid<U><1,4000> }:10

{ mux<K>|standard<K>|smart<K>|to<K> }:mux

Add upstream port


Add/Delete a service port to/from a MUX VLAN

MA5600(config)# service-port vlan 10 adsl 0/1/0 vpi 0 rx-cttr 0

tx-cttr 0



Add Multiple Ports to Different MUX VLAN

Add all ADSL and SHDSL ports to MUX VLANs, with the first

port corresponding to VLAN 2.

MA5600(config)#multi-service-port from-vlan 2 board 0-15 vpi

0 vci 35 rx-cttr 2 tx-cttr 2


Documents

Ma5600 Multi Service Access Module Operation and Maintenance